Hey guys, so I recently got an S6 but was going to sell my m7 for a little extra cash. It had the purple camera issue tho so I was going to return it to stock and send it in for repair. I attempted to follow the return to stock thread but something went wrong. I started out bootloader unlocked via HTCdev and S-off. I thought I had successfully flashed the RUU and proceeded with command to go back to S-on. Well now I can only get to the bootloader. When I try to reboot it always brings me back to the bootloader. Currently it says Tampered, Locked, S-on and I can only do stuff through fastboot. I haven't been able to successfully flash anything from here. Anybody know if there's anything else I can do to get this phone running again? Appreciate any help
What firmware is the phone on? While in fastboot, it will tell you hboot version as well as the os version. If that doesn't work, do fastboot getvar all and post it here with imei and serial removed.
Thanks for the reply. It was on the latest firmware that Santod had posted. OS is 5.28.605.2
If you are on 5.28, the 4.4.3 ruu might work for you.
http://forum.xda-developers.com/showthread.php?t=2919442
EXE RUU VZW M7 4.4.3 S-on users
Sent from my HTC6500LVW using XDA Free mobile app
Uzephi said:
If you are on 5.28, the 4.4.3 ruu might work for you.
http://forum.xda-developers.com/showthread.php?t=2919442
EXE RUU VZW M7 4.4.3 S-on users
Sent from my HTC6500LVW using XDA Free mobile app
Click to expand...
Click to collapse
Whenever I try to use the EXE file I get a connection error. I'm not sure why, the phone's connected and I can still use fastboot. I have the latest HTC sync manager installed so the drivers should be good. If I try to just flash the RUU I get a signature error. Any other ideas that might work?
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.036s]
finished. total time: 0.036s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot flash zip DOTTA
T_VZW_M7_4.4.3_FUU.zip
target reported max download size of 1514139648 bytes
sending 'zip' (1439606 KB)...
OKAY [ 51.053s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 236.104s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot reboot-bootload
er
rebooting into bootloader...
OKAY [ 0.036s]
finished. total time: 0.036s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>
Rpowers308 said:
Whenever I try to use the EXE file I get a connection error. I'm not sure why, the phone's connected and I can still use fastboot. I have the latest HTC sync manager installed so the drivers should be good. If I try to just flash the RUU I get a signature error. Any other ideas that might work?
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.036s]
finished. total time: 0.036s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot flash zip DOTTA
T_VZW_M7_4.4.3_FUU.zip
target reported max download size of 1514139648 bytes
sending 'zip' (1439606 KB)...
OKAY [ 51.053s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 236.104s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>fastboot reboot-bootload
er
rebooting into bootloader...
OKAY [ 0.036s]
finished. total time: 0.036s
C:\Users\Rob\Documents\Android Devices\HTC One\Fastboot>
Click to expand...
Click to collapse
Dude first you have to extract the zip file then run the .exe file just read the instructions in the thread of that RUU. Happy Flashing
OK, I feel like an idiot. I've been trying so many different things to get this to work I copied the section of the command window that I knew wasn't right., however it is still not working. What I have done is extracted the zip from that thread and tried to flash the rom.zip file that was included in it. Unfortunately I still get a signature fail. When I try to use the exe program in that thread I get a USB connection error every time. Thank you both for your replies. It seems that thread is my only shot so I'm going to take my questions over there.
Related
Hello there. I have small problem with s-offing my desire z.... what i done is that i unlocked the phone with Htcdev and flasheod cwm... then i left the phone in Poland... when i got it back I flashed the custom rom... but then i realized i forgot to s off it.... i tried numerous tutorials i managed t change version number to allow downgrade but i always fail when it comes to flash the official rom PC10IMG.zip file.... is there any way i can get it to work? (btw i assume that i dont have to root the device once the custom rom is rooted already) I used this guide
HTML:
http://forum.xda-developers.com/showthread.php?t=1178912
Code:
c:\vision>fastboot oem rebootRUU
...
OKAY [ 0.159s]
finished. total time: 0.160s
c:\vision>fastboot flash zip PC10IMG.zip
sending 'zip' (291447 KB)...
OKAY [ 49.308s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 58.565s
c:\vision>
Thanks.
You do need to root it, and you will also have to relock your bootloader first as htcdev unlocked hboot is nearly worthless. Find nipqer's guide and you'll be good.
Sent from my HTC Vision using xda premium
I was actually followin nipqlers guide but the problem seemed to be the unlocked boot loader i must have had skiped it.... anyways i reclocked the boot loader and it seemed to work thanks
I have I bought Droid Incredible ( Refurbished ) from ebay.com
when system start run Its turn off , sometime turn off befor system start
I have change many root but still problem
I have two phones same problem
How can fix it ? Plz help me
Check through the recent boot loop/hboot threads about how to run an ruu using a PB31IMG.zip.
Sent from my Galaxy Nexus using Tapatalk 2
I did with this one ( mediafire.com/?uvha2u2pv3xp8d5[/url] )
But same problem
Can give me link for another to try plz
Pvillecomp.com. it should have all but the newer files. Try the froyo or gingerbread ruu there and read the help on the site. If you're still confused you can come back and ask questions. Also please report on your progress if you hit any issues or are successful.
Sent from my Galaxy Nexus using Tapatalk 2
I did with froyo and gingerbread , but problem still :crying:
copy of screen in attach
apas100 said:
I did with froyo and gingerbread , but problem still :crying:
copy of screen in attach
Click to expand...
Click to collapse
Try this ruu http://dinc.does-it.net/Stock_Images/4.08.605.15/PB31IMG.zip.
I did but same problem
I think is some wrong with me ,S still on , need I make it off ?
After i do it i got this message "No image or wrong image!"
Plz check photos in attachments
apas100 said:
I did but same problem
I think is some wrong with me ,S still on , need I make it off ?
After i do it i got this message "No image or wrong image!"
Plz check photos in attachments
Click to expand...
Click to collapse
Try reformating your sdcard fat32 with a pc. Then place only the ruu on the sdcard and try again. Sometimes that gets it to work.
My sdcard is FAT32 , I'm tired with it
When I try do it with android-sdk I get "FAILED (remote: not allowed)"
apas100 said:
My sdcard is FAT32 , I'm tired with it
When I try do it with android-sdk I get "FAILED (remote: not allowed)"
Click to expand...
Click to collapse
Even though its already fat32, sometimes reformating it gets it to work.
If your getting the remote not allowed message, it means the bootloader is still locked.
cmlusco said:
Even though its already fat32, sometimes reformating it gets it to work.
If your getting the remote not allowed message, it means the bootloader is still locked.
Click to expand...
Click to collapse
I have unlock bootloader by htcdev.com , It's unlock now , u can see photos in attachments
Is there other reason !
apas100 said:
I have unlock bootloader by htcdev.com , It's unlock now , u can see photos in attachments
Is there other reason !
Click to expand...
Click to collapse
Thats strange, with the bootloader unlocked you should have no issues fastboot flashing cwm recovery. Download this file http://dinc.does-it.net/Guide_Root_New_Hboot/recovery.img, and place it on your pc in the same folder as fastboot.exe. Open a cmd prompt with the phone connected. The phone should be in hboot and say fastboot usb plug in red at the top. Type " fastboot flash recovery recovery.img ".
It's working fine with recovery
----------------------------------------
sending 'recovery' (3064 KB)...
OKAY [ 0.519s]
writing 'recovery'...
OKAY [ 0.994s]
finished. total time: 1.534s
-----------------------------------------
But with ruu isn't work
----------------------------------------
sending 'zip' (126494 KB)...
OKAY [ 19.493s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 19.517s
-----------------------------------------
apas100 said:
It's working fine with recovery
----------------------------------------
sending 'recovery' (3064 KB)...
OKAY [ 0.519s]
writing 'recovery'...
OKAY [ 0.994s]
finished. total time: 1.534s
-----------------------------------------
But with ruu isn't work
----------------------------------------
sending 'zip' (126494 KB)...
OKAY [ 19.493s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 19.517s
-----------------------------------------
Click to expand...
Click to collapse
Try this one line at a time:
fastboot erase cache
fastboot oem rebootRUU
Wait for hboot to load.
fastboot flash zip PB31IMG.zip
hisnededsp
This what i got
sending 'zip' (185063 KB)...
OKAY [ 27.941s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 31.433s
apas100 said:
This what i got
sending 'zip' (185063 KB)...
OKAY [ 27.941s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 31.433s
Click to expand...
Click to collapse
That sounds like a bad download/corruption of the PB file, or the version of ruu you are trying to flash is older than the version on the phone. Try this one http://dinc.does-it.net/Stock_Images/4.08.605.15/PB31IMG.zip
---------- Post added at 04:36 PM ---------- Previous post was at 04:34 PM ----------
Wait i forgot what are we trying to acomplish here lol. Are you just trying to go back to stock, downgrade, flash a rom ...?
This what I got
sending 'zip' (185063 KB)...
OKAY [ 27.777s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 31.250s
up
Hey Guys,
i wanted to upgrade my HTC One M8 to the newest T-Mobile Germany Firmware. My HTC One was rooted and I had the TWRP Recovery with ViperRom.
I installed a Nandroid Backup with the 1.12.111.18 (4.3) Firmware. After that i installed the 1.57.111.2 Stock Recovery, than I relocked the Bootloader and after the Root was gone, I updated my Phone to the 1.57.111.2 (4.4.2), and now my WiFi is not working. I even upgraded to a newer Version of the Stock Recovery, but it still not working.
Here are some Information about my Phone.
HBOOT-3.18.0.0000
RADIO-1.19.21331147A1.09G
OS-
CIDNUM: T-MOB101
If you guys, need some other Information. Just let me know.
lepush said:
Hey Guys,
i wanted to upgrade my HTC One M8 to the newest T-Mobile Germany Firmware. My HTC One was rooted and I had the TWRP Recovery with ViperRom.
I installed a Nandroid Backup with the 1.12.111.18 (4.3) Firmware. After that i installed the 1.57.111.2 Stock Recovery, than I relocked the Bootloader and after the Root was gone, I updated my Phone to the 1.57.111.2 (4.4.2), and now my WiFi is not working. I even upgraded to a newer Version of the Stock Recovery, but it still not working.
Here are some Information about my Phone.
HBOOT-3.18.0.0000
RADIO-1.19.21331147A1.09G
OS-
CIDNUM: T-MOB101
If you guys, need some other Information. Just let me know.
Click to expand...
Click to collapse
Are you S-Off? You can't revert to older firmware while you are S-On.
xunholyx said:
Are you S-Off? You can't revert to older firmware while you are S-On.
Click to expand...
Click to collapse
I'm on S-On, but I want to install a newer Firmware not downgrade to an older one.
This is what I get when I try to install the OTA Update
Code:
xxx-imac:~ x$ cd Desktop
xxx-imac:Desktop xxx$ cd adb
xxx-imac:adb xxx$ ./fastboot devices
HT459WM15609 fastboot
xxx-imac:adb xxx$ ./fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.010s]
finished. total time: 0.010s
xxx-imac:adb xxx$ ./fastboot flash zip OTA_M8_UL_K44_SENSE60_SECURITY_TMO_DE_1.70.111.1-1.57.111.2_release_383280.zip
target reported max download size of 1830612992 bytes
sending 'zip' (253074 KB)...
OKAY [ 9.223s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 9.713s
And when I try to get to the Stock Recovery, I get the HTC One Icon with the red triangle
This is what I get, when my Bootloader is relocked
Code:
xxx-imac:adb xxx$ ./fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.010s]
finished. total time: 0.010s
xxx-imac:adb xxx$ ./fastboot flash zip OTA_M8_UL_K44_SENSE60_SECURITY_TMO_DE_1.70.111.1-1.57.111.2_release_383280.zip
target reported max download size of 1830612992 bytes
sending 'zip' (253074 KB)...
OKAY [ 9.539s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 19.701s
xxx-imac:adb xxx$
I was/am rooted/unlocked, I flashed an unlocker for the hotspot, then the message for com.android.phone began popping up continuously. Tried accessing the bootloader, but for whatever reason, it won't let me get to it. It also appears that my Airplane Mode icon in Settings keeps rapidly blinking on and off.
I managed to turn on Debugging, but it doesn't seem that ADB can see the phone. I've tried to ADB into the bootloader and it won't work.
Windows DOES see the phone in Computer, so I know it does at least see it to access the drives on it.
Please, please tell me that there is still some way to make my phone work again.
Found my way into Recovery. Did a Factory Reset, but the issue is still there. Is there something I can flash that would fix the issue?
I don't care if I go back to stock, locked, unrooted. I just want my phone back. ^^;
Try a stock backup for your Sprint HTC ONE M8
This is what I get from trying to flash what I thought was what I needed.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash zip firmware.zip
target reported max download size of 1826418688 bytes
sending 'zip' (339111 KB)...
OKAY [ 13.958s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 27.235s
Anything you can suggest? I've tried flashing 3 different ones so far.
johnequickiii said:
This is what I get from trying to flash what I thought was what I needed.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash zip firmware.zip
target reported max download size of 1826418688 bytes
sending 'zip' (339111 KB)...
OKAY [ 13.958s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 27.235s
Anything you can suggest? I've tried flashing 3 different ones so far.
Click to expand...
Click to collapse
Did you unlock your bootloader ?
I eventually fixed it. Found the correct RUU. Phew. lol
Sent from my 831C using XDA Premium 4 mobile app
Hello, My phone recently started playing up and it's out of warranty according to O2 because of a scratch on the screen.
The problem was settings would not open, with "Unfortunately settings has stopped". Next the same thing happened to the play store so I can't change any settings or install any apps. Great.
I tried a few suggestions online:
- Wiped cache in bootloader.
- Factory reset
Neither solve the problem, the same error still happens on a fresh install.
So that gets me thinking I need to reinstall firmware? Please tell me to STOP now if this is the wrong thing to do!
I've not done this before so forgive my noobiness.
I've located the correct RUU I believe matching these details:
Code:
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>fastboot getvar all (bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: ############
(bootloader) version-main: 3.35.206.13
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440792_93.00.51117G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: O2___001
all:
finished. total time: 0.017s
androidfilehost fid=24421527759889318
This is what I've got (sorry can't post links!).
I don't have an SD card to fit the phone, can I flash this from my PC or do I need an EXE version?
Thanks
Ed
EDIT: On download of that RUU zip file, when I try to extract the files it says archive corrupt (I've tried downloading twice). Is that normal or is the thing broken? Don't wanna brick the phone.
You don't have to extract the zip file. It's normal for the zip file to not be openable/extractable, as it's encrypted. If you *really* need access to the inside of the RUU (example, get the stock boot image), use the Universal Decryption Tool.
I'm not 100% sure, but I think you should reflash the firmware. Although it's optional, I think your bootloader should be LOCKED or RELOCKED before flashing your RUU.
Instructions are here.
And remember, just in case, triple-check your RUUs.
lazyguyMC said:
You don't have to extract the zip file. It's normal for the zip file to not be openable/extractable, as it's encrypted. If you *really* need access to the inside of the RUU (example, get the stock boot image), use the Universal Decryption Tool.
I'm not 100% sure, but I think you should reflash the firmware. Although it's optional, I think your bootloader should be LOCKED or RELOCKED before flashing your RUU.
Instructions are here.
And remember, just in case, triple-check your RUUs.
Click to expand...
Click to collapse
As I said I don't have an SD card which is all the instructions that post gives, however I found a guide for htc_fastboot. I tried with locked and unlocked. Here is the output:
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot oem rebootRUU ...
OKAY [ 0.056s]
finished. total time: 0.056s
htc_fastboot finished. total time: 0.284s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot flash zip 0PJAIMG.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 3.35.206.13
found large-zip header, file count: 8
processing file 1/8...
sending 'zip' (159355 KB)...
OKAY [ 9.158s]
writing 'zip'...
(bootloader) HOSD CL#670363
(bootloader) GPT is up-to-dated. [17408]
(bootloader) Perform pre-update
FAILED (remote: 90 hboot pre-update! please flush image again immediately )
finished. total time: 13.808s
preupdate done, rebooting...
resending command...
< waiting for device >
sending 'zip' (159355 KB)...
FAILED (status read failed (Unknown error))
finished. total time: 9.218s
htc_fastboot finished. total time: 41.721s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot oem rebootRUU ...
OKAY [ 0.001s]
finished. total time: 0.001s
htc_fastboot finished. total time: 0.218s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot flash zip 0PJAIMG.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 3.35.206.13
found large-zip header, file count: 8
processing file 1/8...
< waiting for device >
sending 'zip' (159355 KB)...
FAILED (status read failed (Unknown error))
finished. total time: 9.194s
htc_fastboot finished. total time:
25.078s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot oem unlock ...
OKAY [ 0.000s]
finished. total time: 0.000s
htc_fastboot finished. total time: 0.206s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot oem rebootRUU ...
OKAY [ 0.001s]
finished. total time: 0.001s
htc_fastboot finished. total time: 0.194s
C:\Users\Ed\Downloads\ADB_20151221_Fastboot_20150822_HtcFastboot_20150529>htc_fastboot flash zip 0PJAIMG.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 3.35.206.13
found large-zip header, file count: 8
processing file 1/8...
< waiting for device >
sending 'zip' (159355 KB)...
FAILED (status read failed (Unknown error))
finished. total time: 9.309s
htc_fastboot finished. total time: 23.830s
Click to expand...
Click to collapse
Neither seems to be working. At the moment the phone is still in RUU mode with the a progress bar about 20% on blue. Don't want to switch it off midway?!
EDIT: To be exact it fails at 18% in the second phase (after pre-update).
I can't help much, but you should try using a regular fastboot.exe and change "htc_fastboot" to "fastboot" in your commands(don't. it will fail.) Also try checking here.
boblettoj99 said:
As I said I don't have an SD card which is all the instructions that post gives, however I found a guide for htc_fastboot. I tried with locked and unlocked. Here is the output:
Neither seems to be working. At the moment the phone is still in RUU mode with the a progress bar about 20% on blue. Don't want to switch it off midway?!
EDIT: To be exact it fails at 18% in the second phase (after pre-update).
Click to expand...
Click to collapse
Wizard_RUU
A small utility from HTC - a shell for flashing RUU.zip through PC (Windows)
Unpacked and taken from official RUU.exe from HTC
How to use:
Download archive Wizard_RUU.rar, unpack.
Download the stock RUU firmware in ZIP (suitable for CID and MID of your phone)
Copy the stock RUU ZIP in the folder with Wizard_RUU
Rename 0PJAIMG_HIMA _ *****. zip to rom.zip
Run the ARUWizard.exe file and follow the on-screen instructions.
If after installing ARUWizard.exe and after confirming the agreement condition, the installation crashes, then download and install Microsoft Visual C ++. After that, run ARUWizard.exe again
Download:
Wizard_RUU.rar (mirror on AFH)
It is used as an alternative to installing the ruu.zip through an external sd card.
PS. All data on the phone will be deleted. If possible, make a backup before installing RUU.