[Q] Conversion to Developer Edition - One (M9) Q&A, Help & Troubleshooting

Hi! Got an M9 from T-Mobile, already S-OFF'ed, rooted, installed latest TWRP and unlocked bootloader, also set CID to BS_US001 and MID to 0PJA11000
Am I ready to run RUU or should I do something else? I want to leave it 100% stock, please let me know the steps I should follow
PS: Sorry for posting in unlocked variant, nobody answered at T-Mobile M9 forum.
Thanks!

Its really easy dude. here go to this thread and follow these steps. http://forum.xda-developers.com/att-one-m9/general/att-developer-edition-ruu-how-to-t3086948
What i did on my tmo m9 was i flashed the previous update before the 5.1 update that came out last week. afterwards, the phone turned on and i checked for the 5.1 update which is around 800MB and it will take like 30 mins for everything to finish so don't assume your phone isn't working. There should be a green bar moving along to let you know how the 5.1 update is going. hope this helps

daniel2744 said:
Its really easy dude. here go to this thread and follow these steps. http://forum.xda-developers.com/att-one-m9/general/att-developer-edition-ruu-how-to-t3086948
What i did on my tmo m9 was i flashed the previous update before the 5.1 update that came out last week. afterwards, the phone turned on and i checked for the 5.1 update which is around 800MB and it will take like 30 mins for everything to finish so don't assume your phone isn't working. There should be a green bar moving along to let you know how the 5.1 update is going. hope this helps
Click to expand...
Click to collapse
Hi! I was following that same guide, I'm I 100% ready to run RUU? Btw sorry to bother, do you have the link to the one you flashed? (don't want to make any mistakes ) Thanks!

philohtc said:
Hi! I was following that same guide, I'm I 100% ready to run RUU? Btw sorry to bother, do you have the link to the one you flashed? (don't want to make any mistakes ) Thanks!
Click to expand...
Click to collapse
so what the question use the 1.32.617.30 RUU.zip
using the 0PJAIMG.ZIP method

I used the second RUU.zip that was listed. look under "and this is the Current Software / with Camera, overheating Fix (use this one)"

If ur soff unlocked. There is 0 point to flash to get dev edition..because that's basically all dev edition is..... u can flash brand new firmware soff and unlocked..
An d brand new roms without being dev edition officially.
Just supercid
Dev edition is stock I just did the same thing
Then flashed twrp again updated rom
If u want freedom
Sent from my HTC One M9 using XDA Free mobile app

Related

[q] m8 european developer edition, stock, unlocked and tampered with s-on

Plz help. I have htc one m8 developer edition its s_on, unlocked, tampered. I want to know will i ever receive ota updates? Because I'm still on 4.4.2.
w69 said:
Plz help. I have htc one m8 developer edition its s_on, unlocked, tampered. I want to know will i ever receive ota updates? Because I'm still on 4.4.2.
Click to expand...
Click to collapse
If it is a true developer edition, you might try backing up, running one of the Developer Edition RUU's to get back to 100% stock, and then see if you can get the OTA update. If this was a conversion, make sure the CID/MID are correct (which requires S-off).
w69 said:
Plz help. I have htc one m8 developer edition its s_on, unlocked, tampered. I want to know will i ever receive ota updates? Because I'm still on 4.4.2.
Click to expand...
Click to collapse
If its truly the Dev Edition, on the stock ROM and stock recovery, you should get OTA.
insert coin
redpoint73 said:
If its truly the Dev Edition, on the stock ROM and stock recovery, you should get OTA.
Click to expand...
Click to collapse
bro i doubt its stock because it is also showin insert coin. are insert coin roms stock or custom??
w69 said:
Plz help. I have htc one m8 developer edition its s_on, unlocked, tampered. I want to know will i ever receive ota updates? Because I'm still on 4.4.2.
Click to expand...
Click to collapse
lock the bootloader and flash then newest RUU
http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
Then simply unlock the bootloader
flash TWRP recovery and SuperSU and a kernel if you need system r/w
w69 said:
bro i doubt its stock because it is also showin insert coin. are insert coin roms stock or custom??
Click to expand...
Click to collapse
Then why did you state in the thread title and OP "stock"?
InsertCoin is a custom ROM and not stock. So you need to return to a stock ROM to install OTA.
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
clsA said:
lock the bootloader and flash then newest RUU
http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
Click to expand...
Click to collapse
1540 is US Dev Edition, and the OP has Euro DE. The RUU likely will not run with incorrect CID, MID. And not sure this is the stock baseline he would want to be on.
Htc one m8 CID: 002, european, stock demo rom (receiving ota)
redpoint73 said:
Then why did you state in the thread title and OP "stock"?
InsertCoin is a custom ROM and not stock. So you need to return to a stock ROM to install OTA.
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
1540 is US Dev Edition, and the OP has Euro DE. The RUU likely will not run with incorrect CID, MID. And not sure this is the stock baseline he would want to be on.
Click to expand...
Click to collapse
ok i changed the custom insert coin rom to this demo rom unfortunately. yet my device is S-on, unlocked boot loader, its cid is 002, european model. the problem is i cant flash any other rom on this demo version rom. i only need a 100% stock rom (sense) to receive ota updates in future. plz reply asap cant use my phone the demo app comes again and again.
w69 said:
ok i changed the custom insert coin rom to this demo rom unfortunately. yet my device is S-on, unlocked boot loader, its cid is 002, european model. the problem is i cant flash any other rom on this demo version rom. i only need a 100% stock rom (sense) to receive ota updates in future. plz reply asap cant use my phone the demo app comes again and again.
Click to expand...
Click to collapse
Whats a Demo Rom ?
do you have TWRP installed ?
Install this >> http://www.androidrevolution.org/downloader/download.php?file=One_M8_2.22.401.4_odexed.zip
That will get the phone working and Sunshine should get you s-off
clsA said:
Whats a Demo Rom ?
do you have TWRP installed ?
Install this >> http://www.androidrevolution.org/downloader/download.php?file=One_M8_2.22.401.4_odexed.zip
That will get the phone working and Sunshine should get you s-off
Click to expand...
Click to collapse
yes i have twrp-2.8.1.0 installed. demo roms are those roms like in shops they have demo phones with playing demo videos again again in it. this rom is only supporting 2G. i used this link http://forum.xda-developers.com/showthread.php?t=2735235 and copied the odexted zip to twrp. it runs successfully but after that phone is in same old condition. is it true that the odexted rom is not installing because im S_ON??
and tell me if i S_OFF will i get ota updates with the odexted rom? sunshine needs 25$. well havnt tried firewater on this demo rom. and bro the link u sent is not working.
w69 said:
is it true that the odexted rom is not installing because im S_ON??
Click to expand...
Click to collapse
Don't know where you obtained that info, but its false. S-off is not needed to install any ROMs.
If the phone is a demo unit, you should have stated that right away in your top post. On a previous HTC device (One X) I believe the demo unit was very difficult, if not impossible to make fully functioning. But no idea if the same is true for the M8 demo unit you have.
redpoint73 said:
Don't know where you obtained that info, but its false. S-off is not needed to install any ROMs.
If the phone is a demo unit, you should have stated that right away in your top post. On a previous HTC device (One X) I believe the demo unit was very difficult, if not impossible to make fully functioning. But no idea if the same is true for the M8 demo unit you have.
Click to expand...
Click to collapse
i have no ideo what was it. i got it from ebay. it had a custom rom 4.4.2 insert coin.i was not receiving fota thats y i thought to shift to full stock. on a facebook page of htc one M8 someone sent me a link to flash it and said its full stock rom. i flashed it with twrp but i came out demo. now im stuck. someone told if me i flash a custom rom again it will be fixed even if its S-ON. kindly tell me a good updated custom rom which doesnot require S-OFF.
w69 said:
on a facebook page of htc one M8 someone sent me a link to flash it and said its full stock rom.
Click to expand...
Click to collapse
Sounds like you just got some random advice, with an unknown link and flashed it. Why on earth would you do such a thing? Stick to XDA, at least here you can go by reputation (number of thanks, Recongnized Contibutor, or Recognized Dev titles).
w69 said:
someone told if me i flash a custom rom again it will be fixed even if its S-ON. kindly tell me a good updated custom rom which doesnot require S-OFF.
Click to expand...
Click to collapse
As I just said in my last response, you do not need S-off to flash any ROMs. If you want help, you need to start actually paying attention to the help that is being given to you. You are also making it very hard to help you, by not giving enough info, and just leaking it out little by little.
You say you can't flash any other ROMs, but that isn't enough information. What happens when you try to flash? Does it fail with an error message? Or flash successful, but doesn't boot? What other ROMs have you tried?
If you want to return to stock to receive OTAs, you will need to find and flash the appropriate nandroid and stock recovery for our CID. Stock backup collection can be found sticky at the top of the General section. There are also various guides on how to return to stock, if you need them just search.
redpoint73 said:
Sounds like you just got some random advice, with an unknown link and flashed it. Why on earth would you do such a thing? Stick to XDA, at least here you can go by reputation (number of thanks, Recongnized Contibutor, or Recognized Dev titles).
As I just said in my last response, you do not need S-off to flash any ROMs. If you want help, you need to start actually paying attention to the help that is being given to you. You are also making it very hard to help you, by not giving enough info, and just leaking it out little by little.
You say you can't flash any other ROMs, but that isn't enough information. What happens when you try to flash? Does it fail with an error message? Or flash successful, but doesn't boot? What other ROMs have you tried?
If you want to return to stock to receive OTAs, you will need to find and flash the appropriate nandroid and stock recovery for our CID. Stock backup collection can be found sticky at the top of the General section. There are also various guides on how to return to stock, if you need them just search.
Click to expand...
Click to collapse
Thanx a lot for your help and concern. now i have installed android revolution rom. i think its good. will see for L rom in future. but the problem was that i found exact rom and rocovery for my device which is 401 wwe european having cid 002 latest HBoot . flashed it and flashing was successful but when i reboot the device its still the same. means the flash didnt work. yes u are right i was leaking out info a little. it was because i knew my device a little and i didnt know what is the current status of my device. now after reasearch of few days my mind is clear. thanx for your help and interest again. this page is a blessing for beginners like me.
w69 said:
Thanx a lot for your help and concern. now i have installed android revolution rom. i think its good. will see for L rom in future. but the problem was that i found exact rom and rocovery for my device which is 401 wwe european having cid 002 latest HBoot . flashed it and flashing was successful but when i reboot the device its still the same. means the flash didnt work. yes u are right i was leaking out info a little. it was because i knew my device a little and i didnt know what is the current status of my device. now after reasearch of few days my mind is clear. thanx for your help and interest again. this page is a blessing for beginners like me.
Click to expand...
Click to collapse
I glad you got it working .. sorry about the dead link, i wish Mike would leave the old version on his site longer

Just got an M9 today and need some tips...

Hello everyone, I I just got an M9 at my local Telus store and I would like to be able to do everything with it like I am able to do with my M7, so I know I will need to use sunshine to get S-OFF and I would also like to be able to change everything from the rom to the kernel to the OS, everything, so I was just wondering if someone could let me know the best order to go about doing things, meaning should I do sunshine first then worry about flashing a recovery and all that, or should I do the recovery first so that I can backup the phones current state? The phone currently says this in the hboot screen:
*** LOCKED ***
LK-1.0.0.0000
OS-1.32.661.6
and this is what it says on the phones Setting-About-Software screen:
Android version
5.0.2
HTC Sense version
7.0
Like I mentioned before, it would probably be best if I can make a backup of the phones current state just in case there are any issues, so to do that I know I need a recovery, but do I need to do the HTC Dev unlocker before I can do so? or do I have to flash a recovery first before everything else?
Now, before anyone gets upset with me for asking these questions because they have most likely been asked 1000 times before, I am not asking to be spoon feed all the details step by step, I am just asking to be pointed in the right direction and asking for you guy's opinions on the best way to go about doing things so that I do them right the first time... So if anyone could please take a minute to help me out and get me pointed in the right direction then it would be greatly appreciated... thank you very much...
apaquette420 said:
So if anyone could please take a minute to help me out and get me pointed in the right direction then it would be greatly appreciated... thank you very much...
Click to expand...
Click to collapse
First thing you should do is unlock your bootloader. After that you can install twrp and flash supersu (most can be found here) Once you are rooted run sunshine. After that the sky is the limit. You will be free to flash anything and everything. I know because I've done it. If you want to convert to a developers edition there is a post here. Personally I do not use my stock recovery or system image backups to download ota's. I prefer to run an RUU and do fresh installs. Reason why is because I am constantly changing firmware and roms. A lot of roms are based on the WWE firmware.
let me know if you have any more questions
bigp951 said:
First thing you should do is unlock your bootloader. After that you can install twrp and flash supersu (most can be found here) Once you are rooted run sunshine. After that the sky is the limit. You will be free to flash anything and everything. I know because I've done it. If you want to convert to a developers edition there is a post here. Personally I do not use my stock recovery or system image backups to download ota's. I prefer to run an RUU and do fresh installs. Reason why is because I am constantly changing firmware and roms. A lot of roms are based on the WWE firmware.
let me know if you have any more questions
Click to expand...
Click to collapse
Thank you very much for the tips.. Do I use the HTC Dev website to unlock the bootloader? I seen a link in the dev thread that said Unlock bootloader without HTCDev(root required), but I bet that the HTCDev way is probably the best best. which did you use? I'm not at home right now so I will begin when I get home later on tonight and if I need anything else I will post back, plus I post back to say how everything goes.. Thanks again for help, it is very much appreciated...
apaquette420 said:
Thank you very much for the tips.. Do I use the HTC Dev website to unlock the bootloader? I seen a link in the dev thread that said Unlock bootloader without HTCDev(root required), but I bet that the HTCDev way is probably the best best. which did you use? I'm not at home right now so I will begin when I get home later on tonight and if I need anything else I will post back, plus I post back to say how everything goes.. Thanks again for help, it is very much appreciated...
Click to expand...
Click to collapse
I've used htcdev for all 2 out o 3 of my m9's. third one is a developer edition so it wasn't needed.
just note download mode is fastboot mode on the m9. htcdev says to boot to fastboot mode and if you do not know than you can waste hours trying to figure it out.
bigp951 said:
I've used htcdev for all 2 out o 3 of my m9's. third one is a developer edition so it wasn't needed.
just note download mode is fastboot mode on the m9. htcdev says to boot to fastboot mode and if you do not know than you can waste hours trying to figure it out.
Click to expand...
Click to collapse
lol I so would have gotten caught up on that lol thanks again man!!! will post back later on...
cool..let me know if you get stuck anywhere
Ok so I got the bootloader unlocked and TWRP installed, right now I am taking a backup of the phones current state just in case. Now I just need to flash the SuperSU beta from the link you provided and then run sunshine, after that I would like to flash the latest OS for my phone, but I am not sure which version to use, I think this one is correct http://forum.xda-developers.com/one-m9/development/firmware-red-t3097678 but I am not 100% sure, do you know if this is the correct latest version for my phone?
Also should I supercid my phone before updating the firmware by entering "fastboot oem writecid 11111111" while in download mode? because my cid is TELUS001 and I do not see that cid listed in the androidinfo.txt file that is in the firmware zip...
Thanks again for all your help...
**UPDATE** I now have S-OFF, I can't believe how smooth the whole process is now with sunshine compared to almost all of my other HTC phones, hats off to those guys for sure... Thank you very much for getting me this far!!! I appreciate it very much...
apaquette420 said:
Ok so I got the bootloader unlocked and TWRP installed, right now I am taking a backup of the phones current state just in case. Now I just need to flash the SuperSU beta from the link you provided and then run sunshine, after that I would like to flash the latest OS for my phone, but I am not sure which version to use, I think this one is correct http://forum.xda-developers.com/one-m9/development/firmware-red-t3097678 but I am not 100% sure, do you know if this is the correct latest version for my phone?
Also should I supercid my phone before updating the firmware by entering "fastboot oem writecid 11111111" while in download mode? because my cid is TELUS001 and I do not see that cid listed in the androidinfo.txt file that is in the firmware zip...
Thanks again for all your help...
**UPDATE** I now have S-OFF, I can't believe how smooth the whole process is now with sunshine compared to almost all of my other HTC phones, hats off to those guys for sure... Thank you very much for getting me this far!!! I appreciate it very much...
Click to expand...
Click to collapse
I was actually just going to tell you to type
Code:
fastboot getvar all
while in download mode and to copy and paste that into a file a text file somewhere so you always have it. then you can supercid. I actually have never seen any firmware for your carrier. what is your mid? this is where I get all of my firmware from. I learned how to remove the red text using hex editor and I also throw in a custom splash screen before I flash.
Here is a link for your stock firmware. not sure what the most up to date is but most custom roms are using the WWE firmware anyways.
p.s. either quote me or tag me if you need a faster response. I'm not getting notifications otherwise.
bigp951 said:
I was actually just going to tell you to type
Code:
fastboot getvar all
while in download mode and to copy and paste that into a file a text file somewhere so you always have it. then you can supercid. I actually have never seen any firmware for your carrier. what is your mid? this is where I get all of my firmware from. I learned how to remove the red text using hex editor and I also throw in a custom splash screen before I flash.
Click to expand...
Click to collapse
My mid is 0PJA11000 but the one that is listed in the androidinfo.txt file of the firmware that I linked earlier is 0PJA10000, does this mean I cant use it? in all I plan to flash ViperOneM9 3.5.0 for the rom and it says it requires 2.10 but my phone is currently at 1.32
apaquette420 said:
My mid is 0PJA11000 but the one that is listed in the androidinfo.txt file of the firmware that I linked earlier is 0PJA10000, does this mean I cant use it?
Click to expand...
Click to collapse
I honestly don't know if the hardware is any different but it looks like your mid is the same as the dev ed. check this one out. @clsA is very knowledgeable on the m9. I learned a lot of what I know from his posts.
Personally I have gotten so relaxed that I just change my mid and cid to whatever it is I want to flash and just go for it. But I also understand that I'm risking a brick by doing so..lol
bigp951 said:
I honestly don't know if the hardware is any different but it looks like your mid is the same as the dev ed. check this one out. @clsA is very knowledgeable on the m9. I learned a lot of what I know from his posts.
Personally I have gotten so relaxed that I just change my mid and cid to whatever it is I want to flash and just go for it. But I also understand that I'm risking a brick by doing so..lol
Click to expand...
Click to collapse
took a look at the thread and it looks like all I need to do to flash 2.10 which is the international version is type fastboot oem writemid 0PJA10000 while in downloader mode because like you said and which I also confirmed in the other thread that my phone is the same as the dev ed and I should be able to switch back and forth with the same command
apaquette420 said:
took a look at the thread and it looks like all I need to do to flash 2.10 which is the international version is type fastboot oem writemid 0PJA10000 while in downloader mode because like you said and which I also confirmed in the other thread that my phone is the same as the dev ed and I should be able to switch back and forth with the same command
Click to expand...
Click to collapse
If going to dev ed I have had better luck running an RUU and accepting ota's as far as the radio goes. my reception went from 2 bars to full bars doing it that way verses just flashing the newest firmware. But it is a very long and tedious process and since you just got your m9 I'm sure you want to use it already..
What rom are you thinking about flashing?
bigp951 said:
If going to dev ed I have had better luck running an RUU and accepting ota's as far as the radio goes. my reception went from 2 bars to full bars doing it that way verses just flashing the newest firmware. But it is a very long and tedious process and since you just got your m9 I'm sure you want to use it already..
What rom are you thinking about flashing?
Click to expand...
Click to collapse
I am hoping to flash ViperOneM9 3.5.0, it was the only rom I ran on my M7 and I loved it, so I'm really hoping to have it on this phone too... I just asked in the roms thread to see if anyone else there is on my same network to see how they got it working... and to be honest I don't mind waiting in order to get things done the right way the first time, know what I mean...
apaquette420 said:
I am hoping to flash ViperOneM9 3.5.0, it was the only rom I ran on my M7 and I loved it, so I'm really hoping to have it on this phone too... I just asked in the roms thread to see if anyone else there is on my same network to see how they got it working... and to be honest I don't mind waiting in order to get things done the right way the first time, know what I mean...
Click to expand...
Click to collapse
Viper is one of my favorites. Was using it for months. They are good about replying too... A little too good because you get spoiled. Then when you post on other roms and nobody ever replies you realize how good those guys are..haha
check out the second line on this thread to reclaim 3 gb of data after using sunshine. I've been s-off for months and just saw this today.
bigp951 said:
Viper is one of my favorites. Was using it for months. They are good about replying too... A little too good because you get spoiled. Then when you post on other roms and nobody ever replies you realize how good those guys are..haha
check out the second line on this thread to reclaim 3 gb of data after using sunshine. I've been s-off for months and just saw this today.
Click to expand...
Click to collapse
do you know where I can find the latest international RUU? what rom are you running now?
@bigp951
Ok so I got the firmware updated to the latest international version 2.10 and was able to flash the ViperOne Rom and I love it just like I did for my M7... Everything is working great, except I have the problem that you mentioned would happen, I only show 1 bar for my signal strength, could you please let me know exactly what you had to do to fix it? Also, I would just like to say thank you once more, you helped me out a great deal and you made my upgrade to the M9 an absolute cake walk, so thank you very much for everything and for explaining the proper steps to take, I appreciate it very much...

HTC 10 Bell

Hi guys, I got the HTC 10 bell variant at a good price and since is my back up phone I'm trying to put it to the test to change it from bell variant to the US variant, I was reading a lot of threads but im confused, , I unlocked the bootloader, I instaled the twrp, now how do i change the CID ??mine shows 666, and I want to change it to 617 , do I have to have S-OFF?? or I can do that with S-ON since the Bootloader is unlocked , will I get the OTA updates for the 617 after i change it?? (btw i dont want to chage it to 401 international because im afraid i will loose the band 4 LTE )
I'm with bell and changed to us unlocked. There might be a way to do it without s-off like maybe super cid. But to install ruu.exe you need s-off. You will get ota but to apply all you need is to reinstall stock recovery.
Sent from my HTC 10 using Tapatalk
You can't change your CID and flash the Unlocked version without S-OFF.
Thanks guys for your replays ,btw nitramus can u pls add a step by step how I did it??I'm new with the HTC
Since you're at the cid part just look for the thread for changing cid and flash ruu. And look at the thread with all the backups for all the versions or stock rom. You will have all you need, latest available rom with ota. To prevent any problems as soon as your phone is ready to use after ruu and you logged in to you account apply ota right away, then flash supersu and have fun.
Sent from my HTC 10 using XDA-Developers mobile app
But first do I have to take s-off??I mean to change from s-on to s-off
nutzuTo said:
But first do I have to take s-off??I mean to change from s-on to s-off
Click to expand...
Click to collapse
Yes to convert your phone to U.S Unlocked you'd have to S-off to be able to change your CID. You gotta pony up the 25 USD, which is worth it in my opinion if you're gonna use the 10 as your main phone and tinker with it for a year or two.
Basically follow the steps from this guide, and when it comes to flashing an RUU use the Unlocked one you can download directly from HTC.com
http://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593
BTW it's very fitting that Bell's CID is 666
Tarima said:
Yes to convert your phone to U.S Unlocked you'd have to S-off to be able to change your CID. You gotta pony up the 25 USD, which is worth it in my opinion if you're gonna use the 10 as your main phone and tinker with it for a year or two.
Basically follow the steps from this guide, and when it comes to flashing an RUU use the Unlocked one you can download directly from HTC.com
http://forum.xda-developers.com/htc-10/how-to/guide-how-to-drand-convert-htc-10-to-t3374593
BTW it's very fitting that Bell's CID is 666
Click to expand...
Click to collapse
OK did that so I have S-off, I changed the CID on the cmd , and than I flashed with RUU_PERFUME_WL_M60_SENSE80GP_NA_Gen_Unlock_1.53.617.5 than update to the latest ones that they pop up to update, nice Thank you ,btw if i want to change S-on will impact the updates or should i keep it S-off??
Personally I don't bother to change back but if security is important for you then maybe. Later depending if you want to change things again depending on what you do you might still need s-off.
Sent from my HTC 10 using XDA-Developers mobile app
nutzuTo said:
OK did that so I have S-off, I changed the CID on the cmd , and than I flashed with RUU_PERFUME_WL_M60_SENSE80GP_NA_Gen_Unlock_1.53.617.5 than update to the latest ones that they pop up to update, nice Thank you ,btw if i want to change S-on will impact the updates or should i keep it S-off??
Click to expand...
Click to collapse
If you are rooted and/or have a custom recovery, you can't use the official OTAs. You'll need the stock and never rooted ROM (it has to have an unmodified system partition), and also the stock recovery to flash it.
The easiest (and often quicker way than waiting for an official OTA) is to just flash a firmware.zip package in either fastboot or by the rename/SD card method.
I recommend the ones on this thread. You can find both Full Stock .zips there, that will wipe your phone (because they contain the boot.img), and No-Wipe .zips that won't wipe your phone (obviously) as they have the boot.img (kernel and ramdisk) removed, and also contain the latest TWRP recovery versions instead of the stock recovery.
nutzuTo said:
OK did that so I have S-off, I changed the CID on the cmd , and than I flashed with RUU_PERFUME_WL_M60_SENSE80GP_NA_Gen_Unlock_1.53.617.5 than update to the latest ones that they pop up to update, nice Thank you ,btw if i want to change S-on will impact the updates or should i keep it S-off??
Click to expand...
Click to collapse
To add regarding future OTA updates, if you want them directly from HTC you'll also have to remove SuperCID, if you have it. Just having a stock/unmodified system and recovery isn't enough.
And I agree, just keep S-off unless you're making a warranty claim.
Tarima said:
To add regarding future OTA updates, if you want them directly from HTC you'll also have to remove SuperCID, if you have it. Just having a stock/unmodified system and recovery isn't enough.
And I agree, just keep S-off unless you're making a warranty claim.
Click to expand...
Click to collapse
I was hoping someone might have the official stock firmware including recovery, from bell? I have to send my phone in for warranty repair. I have my stock system backed up and am on firmware 121.666... I have s-off and boot loader locked status. I have super cid 11111111. Any help will be reciprocated. Thank you for any help.
Salem's galaxy said:
I was hoping someone might have the official stock firmware including recovery, from bell? I have to send my phone in for warranty repair. I have my stock system backed up and am on firmware 121.666... I have s-off and boot loader locked status. I have super cid 11111111. Any help will be reciprocated. Thank you for any help.
Click to expand...
Click to collapse
Hey, did you get this figured out?
I have a stock backup in my recovery, might work. Might not lol..
Was thinking of going US since Bell still has not pushed an update out..

Can I safely revert to Android 6.x? (From 7) using RUU?

I updated my HTC 10 to the brand new 7.0. It seems either Google or HTC has totally broken the long pause conference call pin feature in android. (This is where you dial a number and a conference pin separated by a semi-colon like XXXXXXXXXX;XXXXX) The popup asking me if I want to send the Pin number disappears after about 3 or 4 seconds way before the "Beep" when i need to send the pin.
Total deal breaker for me, since I make conference calls ALL day and I'm not going to revert to writing pin numbers on my hand while i'm in the car so I can dial them at the beep.
I desperately need to go back to Android 6.0.
I have lots of flashing, unlocking, and custom rom experience, but this device has some strange quirks like breaking the radio if you decrypt the file system...
Do I just need to use an android 6.0 RUU?
Will there be any issues due to encryption, 7.0 firmware, or anything else I need to be careful of when downgrading?
I am wondering too about downgrading procedure...
I want to know if it is safe using ruu.
I want to convert my international Htc 10 to developer unlocked and flash ruu so I can receive the nougat it's just to try it out.
Can I reverse this?
Looking forward to that answer.
If you're s-off it should be ok I think. But without s-off, downgrading firmware using an official RUU is not possible
sardelisp said:
I am wondering too about downgrading procedure...
I want to know if it is safe using ruu.
I want to convert my international Htc 10 to developer unlocked and flash ruu so I can receive the nougat it's just to try it out.
Can I reverse this?
Looking forward to that answer.
Click to expand...
Click to collapse
I was on Viper 3,5. I converted my cid-mid to us unlocked and installed latest US UNLOCKED MM RUU.exe successfuly. Then I checked the firmware and took the official OTA,upgraded to Nougat successfuly. So I guess you can have Nougat,too.
Now I am on Nougat US Unlocked S-off cid BS_US001 mid 2PS650000 . I am wondering if I could revert to MM with the RUU.exe I have. Do I have to change to Supercid or do anything else,or just the RUU.exe would do the trick?
ordeniz said:
I was on Viper 3,5. I converted my cid-mid to us unlocked and installed latest US UNLOCKED MM RUU.exe successfuly. Then I checked the firmware and took the official OTA,upgraded to Nougat successfuly. So I guess you can have Nougat,too.
Now I am on Nougat US Unlocked S-off cid BS_US001 mid 2PS650000 . I am wondering if I could revert to MM with the RUU.exe I have. Do I have to change to Supercid or do anything else,or just the RUU.exe would do the trick?
Click to expand...
Click to collapse
I downgraded back to 6 from 7 with no issues
gillim74 said:
I downgraded back to 6 from 7 with no issues
Click to expand...
Click to collapse
You were like me?
ordeniz said:
You were like me?
Click to expand...
Click to collapse
Yeah
gillim74 said:
I downgraded back to 6 from 7 with no issues
Click to expand...
Click to collapse
And when you say you downgraded..
Were you S-Off? (I'm not and since you said you were like ordeniz, I assume you were?)
Were you on the official 7 OTA (with firmware upgraded) or a custom rom built on 7 but without the firmware upgrade? (Again, if you were like ordeniz then you had the official OTA.)
I just wanted to be clear, and not make any assumptions.
x51 said:
And when you say you downgraded..
Were you S-Off? (I'm not and since you said you were like ordeniz, I assume you were?)
Were you on the official 7 OTA (with firmware upgraded) or a custom rom built on 7 but without the firmware upgrade? (Again, if you were like ordeniz then you had the official OTA.)
I just wanted to be clear, and not make any assumptions.
Click to expand...
Click to collapse
I am s-off converted my htc 10 to us unlocked as its the verizon variant upgraded to nougat didnt reallly like it so i downgrade back to 1.96
Tarima said:
If you're s-off it should be ok I think. But without s-off, downgrading firmware using an official RUU is not possible
Click to expand...
Click to collapse
gillim74 said:
I am s-off converted my htc 10 to us unlocked as its the verizon variant upgraded to nougat didnt reallly like it so i downgrade back to 1.96
Click to expand...
Click to collapse
OK. Thanks to all.
Guess I need to S-Off. (I hope sunshine works on 7.0) or I'm pretty well screwed.
x51 said:
OK. Thanks to all.
Guess I need to S-Off. (I hope sunshine works on 7.0) or I'm pretty well screwed.
Click to expand...
Click to collapse
As of now i dont think sunshine does
The sure thing I know is that you need to be rooted to be s-off. If sunshine will succeed you will know it when the sunshine app check your system. Download the app and before in app purchase a licence will tell you if you have successfull s off.
incallui.apk
Would someone be so kind as to upload a copy of InCallUI.apk from a 6.x Rom.
It's located in
/system/priv-app/InCallUI

I have a T-mobile HTC One M9. Can I update to nougat using the unlocked RUU?

Hi, I was wondering if it is possible for me to use the stock RUU to update to nougat on my htc one m9 rather than waiting for t-mobile to release a verified rom later in the year?
Yes u can. Just make sure that u are s-off and bootloader unlocked and then flash the dev edition ruu and u will get nougat.
Faisal0000 said:
Yes u can. Just make sure that u are s-off and bootloader unlocked and then flash the dev edition ruu and u will get nougat.
Click to expand...
Click to collapse
Not quite. To flash the developer RUU on a T-Mobile branded M9, you'll need to change your MID & CID to match the SKU of the developer edition RUU. If you don't know about these acronyms, stop what you are doing and read up. The FAQ section of the M9 readme thread, question 9, walks you through converting GSM phones (like the T-Mobile version) to the developer edition.
Faisal0000 said:
Yes u can. Just make sure that u are s-off and bootloader unlocked and then flash the dev edition ruu and u will get nougat.
Click to expand...
Click to collapse
Hi, And me I have htc one m9 sprint i can flash ruu nougat???
EKB8789 said:
Hi, And me I have htc one m9 sprint i can flash ruu nougat???
Click to expand...
Click to collapse
Not until Sprint releases the Android Nougat update.
The only update the is currently available is for the developer edition of the M9, a GSM model. Sprint is a CDMA carrier and incompatible with GSM.
Thanks for clarifying.
And you cannot flash on sprint or cdma phones. The ruu is only for gsm phones.
computerslayer said:
Not quite. To flash the developer RUU on a T-Mobile branded M9, you'll need to change your MID & CID to match the SKU of the developer edition RUU. If you don't know about these acronyms, stop what you are doing and read up. The FAQ section of the M9 readme thread, question 9, walks you through converting GSM phones (like the T-Mobile version) to the developer edition.
Click to expand...
Click to collapse
Thanks for linking me that. It also solved my question about why I was experiencing a bootloop, and gave me the method I had been searching for to crossflash
boredherobrine13 said:
Thanks for linking me that. It also solved my question about why I was experiencing a bootloop, and gave me the method I had been searching for to crossflash
Click to expand...
Click to collapse
Wonderful! Always nice when we find a solution. Kudos go to Flippy498, who created that thread and updates it as things come out, and to the many XDA members who have contributed to it.
computerslayer said:
Wonderful! Always nice when we find a solution. Kudos go to Flippy498, who created that thread and updates it as things come out, and to the many XDA members who have contributed to it.
Click to expand...
Click to collapse
Yup, now my next question is...how do i flash firmware v4...as I did CID/MID conversion to the Dev/Unlocked version, but now need the firmware, not just the RUU to flash
boredherobrine13 said:
Yup, now my next question is...how do i flash firmware v4...as I did CID/MID conversion to the Dev/Unlocked version, but now need the firmware, not just the RUU to flash
Click to expand...
Click to collapse
RUUs have the firmware along with everything else. While I'm pretty sure there's a way to flash individual components (radio, firmware, et cetera), that is beyond me. I stick to using the RUUs, and recommend them heartily. The easiest method is the SD card method - outlined in that same post. You'll end up wiping your internal phone storage (so back up what you care about), but it'll get you to the latest and greatest for the M9.
computerslayer said:
RUUs have the firmware along with everything else. While I'm pretty sure there's a way to flash individual components (radio, firmware, et cetera), that is beyond me. I stick to using the RUUs, and recommend them heartily. The easiest method is the SD card method - outlined in that same post. You'll end up wiping your internal phone storage (so back up what you care about), but it'll get you to the latest and greatest for the M9.
Click to expand...
Click to collapse
Really? I read that you couldn't use an RUU because verify key on firmware v1-3 is different from the one on v4, so you need v4 firmware to use a v4 RUU, which requires using a method. So I converted to dev/ATT/unlocked, flashed a v3 RUU I found online, and now I'm going to try to update to v4 which is apparently safer. If this fails, I'll try the RUU. After all, this is all vanilla to HTC so it should tell me if it won't work.
boredherobrine13 said:
Really? I read that you couldn't use an RUU because verify key on firmware v1-3 is different from the one on v4, so you need v4 firmware to use a v4 RUU, which requires using a method. So I converted to dev/ATT/unlocked, flashed a v3 RUU I found online, and now I'm going to try to update to v4 which is apparently safer. If this fails, I'll try the RUU. After all, this is all vanilla to HTC so it should tell me if it won't work.
Click to expand...
Click to collapse
I'm pretty sure the issues about keys has to do with trying to downgrade. But that's above my knowledge level.
I know for sure that you can apply the Nougat RUU after the Marshmallow RUU without issue because I have done this myself.
computerslayer said:
I'm pretty sure the issues about keys has to do with trying to downgrade. But that's above my knowledge level.
I know for sure that you can apply the Nougat RUU after the Marshmallow RUU without issue because I have done this myself.
Click to expand...
Click to collapse
Really? Well..I've already applied v3.0 and am going through all the updates. But Its certainly worth a try I suppose.
computerslayer said:
I'm pretty sure the issues about keys has to do with trying to downgrade. But that's above my knowledge level.
I know for sure that you can apply the Nougat RUU after the Marshmallow RUU without issue because I have done this myself.
Click to expand...
Click to collapse
Just tried. Got an err.
boredherobrine13 said:
Just tried. Got an err.
Click to expand...
Click to collapse
Are you trying to take OTA updates or using an RUU?
Also, what's the error message?
computerslayer said:
Are you trying to take OTA updates or using an RUU?
Also, what's the error message?
Click to expand...
Click to collapse
Tried to use an RUU. Got a signature error of some sort. Can't remember the number. RN it is taking OTA updates smoothly. Now, it will either get to v4 eventually through the OTA updates, or it will cut off at the top of v3 (in which case I have done something horribly wrong). I will try to flash RUU after I get v4 through OTA, just for fun and for the sake of the community
Edit 1: v4 finally showed up through OTA. 2GB Downloading currently. Will still RUU to double check compatibility. Will post back with success or not.
Edit 2: v4 was successful, device convered to HIMAULATT. Now flashing the Dev RUU, which works. It didn't work on v3. Therefor I was correct, and RUU v3 -> v4 isn't compatible.
boredherobrine13 said:
Tried to use an RUU. Got a signature error of some sort. Can't remember the number. RN it is taking OTA updates smoothly. Now, it will either get to v4 eventually through the OTA updates, or it will cut off at the top of v3 (in which case I have done something horribly wrong). I will try to flash RUU after I get v4 through OTA, just for fun and for the sake of the community
Edit 1: v4 finally showed up through OTA. 2GB Downloading currently. Will still RUU to double check compatibility. Will post back with success or not.
Edit 2: v4 was successful, device convered to HIMAULATT. Now flashing the Dev RUU, which works. It didn't work on v3. Therefor I was correct, and RUU v3 -> v4 isn't compatible.
Click to expand...
Click to collapse
Going from Marshmallow to Nougat is definitely possible (I've done it myself) - I'm not sure why your phone gave you such troubles. But in any case, I'm glad your phone is fully updated! Congratulations.
computerslayer said:
Going from Marshmallow to Nougat is definitely possible (I've done it myself) - I'm not sure why your phone gave you such troubles. But in any case, I'm glad your phone is fully updated! Congratulations.
Click to expand...
Click to collapse
As I wrote before, was not successful with mine. I was not able to flash Su 2.79. How did that work for you.
Pls can you make a discription how to
Mine is S-on, is it neccessary first to s-off

Categories

Resources