Related
Firstly I love this phone. After working through 4 Samsung Galaxy S's to finally ask to be switched away from it to this, I was very happy.
This phone is rock solid.
BUT. I have a problem. I like to use maps or nav in my car. I have the phone plugged in but after the timeout period the screen goes dim. I'm normally OK with that but the dim setting on this phone seems to be ridiculously dark!
To your knowledge, without rooting it to get the Cyanogen settings, is there a way to brighten the dimmed level of brightness?
I have tried disabling the auto-brightness and bumping it up but still after the timeout period it dims very dark.
How about a toggle or widget to keep the screen always on? There are quite a few available I reckon. I know its one extra step to carry out whereas you are looking for something more automated. Maybe there is an app that can let you make a list of apps that enable screen always on?... Not sure about that but worth a look eh?
i do use a switch with Extended Controls widget.
the problem isnt that it dimms, it's that when it does dim it is far too dark.
When the samsung went to the dim setting it was still viewable.
If i remember right when i had it plugged in it would not dim if i was viewing maps.
anyways, the phone as it is is useless when it dims. i can touch the screen to bring back the brightness. I can set the timeout period to 30 minutes, but all of this requires that i re-activate the screen to bring it back.
i guess i am seeing one more reason to root the device. i'm nervous about rooting and would prefer to not have to if i dont need to.
groaner said:
Firstly I love this phone. After working through 4 Samsung Galaxy S's to finally ask to be switched away from it to this, I was very happy.
This phone is rock solid.
BUT. I have a problem. I like to use maps or nav in my car. I have the phone plugged in but after the timeout period the screen goes dim. I'm normally OK with that but the dim setting on this phone seems to be ridiculously dark!
To your knowledge, without rooting it to get the Cyanogen settings, is there a way to brighten the dimmed level of brightness?
I have tried disabling the auto-brightness and bumping it up but still after the timeout period it dims very dark.
Click to expand...
Click to collapse
This is a characteristic of the software that you are using. The software needs to establish a WAKE LOCK in order to keep the screen bright. If it isn't working, then there is something wrong with the software you are using. I suggest using COPILOT for navigation. It works properly.
dhkr123 said:
This is a characteristic of the software that you are using. The software needs to establish a WAKE LOCK in order to keep the screen bright. If it isn't working, then there is something wrong with the software you are using. I suggest using COPILOT for navigation. It works properly.
Click to expand...
Click to collapse
agreed, the software is probably working properly. google navigation does not time out. google maps does and they dont give you an option to have it not time out when plugged in. silly if you ask me.
i dont mind that as much as i mind how much it dims.
Does anyone else find that the desire z dims too dark?
anyways, i may be beating a dead horse here. trying to get blood from a stone and all that.
well if anyone has any other ideas that would be helpful. thanks for the suggestions thus far.
So I've finally had the chance to play with one of these watches extensively, and I am baffled by ambient mode.
It's not that it still turns off sometimes; that makes perfect sense. What's wrong with it is that it doesn't actually update even when the screen is on.
Test it yourself. Use the default watch face, enable ambient mode, and go in a completely dark room. You can leave the watch still or move it about, just don't let it act as if you're raising your arm and brighten the display.
Watch it for two or three minutes, and you'll notice that even though the screen remains on, it never updates -- the minute hand never moves, and so it doesn't actually show the right time very quickly after it dims. (This is with the official, default watch face, a just-rest watch, the latest firmware installed, and plenty of battery remaining.)
When the screen turns on from a raise or tap in ambient mode, you can actually see the minute hand jump forward several minutes in one go. Even with ambient mode disabled, the watch still turns on automatically with the raise gesture, and it takes no longer to do so than it does in ambient mode.
That implies there is no reason to use it other than vanity. After all, in the brief time before the backlight comes on the watch shows the wrong time, and it doesn't actually show the right time any faster than it would have.
But it's not really a vanity mode either, because except in a very dark place, the dimmed screen is indistinguishable from a powered off one to those standing near you. So you're wasting power, but still look like you have a blank screen on your wrist.
So what, precisely, is the point? It seems to me to add no benefit, just to waste battery. I'm baffled.
Sent from my Nexus 10 using Tapatalk
I played with Ambient Mode a little before the recent update, but battery life just wasn't sufficient to keep it on. After the update, battery life improved enough for Ambient Mode, so I switched it on. I dealt with it a couple days, then ultimately turned it off for this very reason. It just seemed clunky to me, and as you stated, I'd often glance at my wrist only to see the wrong time until suddenly the watch came fully on and updated.
I was excited for Ambient mode, but like you, I no longer see the point. I'd rather just have a user-controllable setting for "fully on" sensitivity. If I could make my 360 just a little more sensitive to my raising my wrist action, it'd be perfect without Ambient Mode.
I wish I could have the screen on all the time in some cases.. like if you go to someplace classy, i would have the face on all the time displaying the watch face. Thats just me.
I've seen the screen update while it was dim. I do think that it is too dim to use outside like you mentioned.
I noticed this as well. Surely just a bug or an issue with android wear that will be fixed at some point. I'm also sure they will provide a lot more features to regulate screen controls, on, off, brightness, etc in future updates. It's just a matter of time.
I look at it this way... the sensor is kind of future proof if anything. Might not be very useful now, but could have a lot of potential in the next few months or once custom ROM's start rolling out.
Android wear is still in the early stages. It can only get better. Just be patient, we are early adopters on first generation hardware.
tlxxxsracer said:
I wish I could have the screen on all the time in some cases.. like if you go to someplace classy, i would have the face on all the time displaying the watch face. Thats just me.
Click to expand...
Click to collapse
Here is a way you can set the screen on all the time:
http://forum.xda-developers.com/showthread.php?p=55311726
knoxploration said:
So I've finally had the chance to play with one of these watches extensively, and I am baffled by ambient mode.
It's not that it still turns off sometimes; that makes perfect sense. What's wrong with it is that it doesn't actually update even when the screen is on.
Test it yourself. Use the default watch face, enable ambient mode, and go in a completely dark room. You can leave the watch still or move it about, just don't let it act as if you're raising your arm and brighten the display.
Watch it for two or three minutes, and you'll notice that even though the screen remains on, it never updates -- the minute hand never moves, and so it doesn't actually show the right time very quickly after it dims. (This is with the official, default watch face, a just-rest watch, the latest firmware installed, and plenty of battery remaining.)
When the screen turns on from a raise or tap in ambient mode, you can actually see the minute hand jump forward several minutes in one go. Even with ambient mode disabled, the watch still turns on automatically with the raise gesture, and it takes no longer to do so than it does in ambient mode.
That implies there is no reason to use it other than vanity. After all, in the brief time before the backlight comes on the watch shows the wrong time, and it doesn't actually show the right time any faster than it would have.
But it's not really a vanity mode either, because except in a very dark place, the dimmed screen is indistinguishable from a powered off one to those standing near you. So you're wasting power, but still look like you have a blank screen on your wrist.
So what, precisely, is the point? It seems to me to add no benefit, just to waste battery. I'm baffled.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Just watched mine move the minutes hand just fine in ambient mode... this is with the classic Motorola face.
https://www.youtube.com/watch?v=HsTpDpgYwFY
I have started using ambient mode for the first time in a bright office environment and noticed that at random times the display completely turns off. It turns back on once I move my hand ever so slightly. For me Ambient Mode should always be on regardless of lighting condition and watch orientation.
zarks said:
I have started using ambient mode for the first time in a bright office environment and noticed that at random times the display completely turns off. It turns back on once I move my hand ever so slightly. For me Ambient Mode should always be on regardless of lighting condition and watch orientation.
Click to expand...
Click to collapse
I thought it would stay on the dimmed mode the whole time too... but like you said it turns on with even the slightest rotation of the wrist now, and that means we can finally glance at the watch and see the time!
:good:
The minuets do update in real time so idk what you're seeing?
This observation definitely needs to be settled because we have 2 conflicting reports here. Some of you are claiming the watch does not update the time even when the screen is on unless you fully wake the screen. Others are saying it updates just fine, so what gives?
FYI my G watch always displays the correct time, even when dimmed, so I dont think it's an Android Wear problem. Sounds kinda like additional battery conservation steps by Moto. They are essentially sleeping the CPU so that there is just enough juice remaining to keep the screen on for 16+ hours. I just dont understand how some of you are experiencing this and others are not.
for me, in ambient mode, the screen still turns off after a while. but it turns back on much quicker than with ambient mode off. it often takes an exaggerated bring-up-arm movement to turn on the screen with ambient off. i used to resort to tapping the screen instead. with ambient on the battery still last me a "work day". off charger at 7AM and dies around 10PM or so...battery lasts longer with stock faces compared to Facer faces...
Most developer purposes.
My ambient mode used to stay on all the time now it turns off the screen..
ws6kid said:
My ambient mode used to stay on all the time now it turns off the screen..
Click to expand...
Click to collapse
I just started using it and noticed the screen stays on if you keep it flat horizontal, but if you turn your wrist past 45 degrees it turns off.
Maybe they added that with the update, did ambient mode used to stay on even when that watch is sideways?
Ambient is so useless for me, the screen is almost off all the time... So frustrating coming from a g watch
RunNgun42 said:
This observation definitely needs to be settled because we have 2 conflicting reports here. Some of you are claiming the watch does not update the time even when the screen is on unless you fully wake the screen. Others are saying it updates just fine, so what gives?
FYI my G watch always displays the correct time, even when dimmed, so I dont think it's an Android Wear problem. Sounds kinda like additional battery conservation steps by Moto. They are essentially sleeping the CPU so that there is just enough juice remaining to keep the screen on for 16+ hours. I just dont understand how some of you are experiencing this and others are not.
Click to expand...
Click to collapse
For me, I believe I have seen my watch 'get stuck' maybe once or twice where the time on the dim screen wasn't the same as I had on my computer. This could just be a difference in the clocks, as whenever I check both my phone and my dim watch together, they are the same. Like RunNgun42 said, I think it might be a thing where the proc is in sleep mode to try and save power and isn't keeping up the time as accurately as it could. Once you shake it though and the screen lights up again, the proc will come out of sleep and maintain more accurate timekeeping.
Isn't there a screen always on option in the android wear app?
And yes ambient mode still turns off when the watch is at an angle consistent with being down at your side or is completely still.
SilentAce07 said:
Isn't there a screen always on option in the android wear app?
Click to expand...
Click to collapse
No, you can't keep the screen on at all times out of the box, but some 3rd party software can do it...
Ambient mode is a lot quicker to wake up and react than non-ambient, it's a lot more accurate (non-ambient often stays off when I turn my arm to look at the time), it's easier to see what time it is, and it acts a lot more like a conventional watch- the display is on when you need it.
Battery drain is not a biggie, I get through the day, every day.
With most Android Wear watches lacking an ambient light sensor, this Huawei one included, I'm wondering if you often have to manually adjust brightness, either not to be blinded at night, or to actually see the screen in daylight.
As far as I understand, an awake watch will get brighter, and ambient mode will be darker. There's also the double and triple crown clicks for theater (screen off) and sunlight (brighter) modes. And things like Display Brightness for Wear, or through AutoWear for finer grained and somewhat automated results.
And that's what I'm really wondering: if I can get a satisfying custom behaviour through AutoWear, by slices of day time (eg, brightest at noon, and progressively darker as night approaches), that'd be fine enough to me. But if I constantly have to adjust things manually, I fear that would quickly become annoying (I can spend a lot of energy tweaking automation to ensure I can be as lazy as can be afterwards ).
Do you choose a middle ground brightness setting and are fine with it most of the time, except when you rarely have to double or triple crown click? Do you find yourself manually adjusting brightness a few times a day? Do you constantly fiddle with brightness settings?
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
I missed it greatly from my urbane, so I went back to it.
suzook said:
I missed it greatly from my urbane, so I went back to it.
Click to expand...
Click to collapse
Uh? Missed what? The Urbane has no ambient light sensor either, does it?
noraef said:
Uh? Missed what? The Urbane has no ambient light sensor either, does it?
Click to expand...
Click to collapse
UH! Yeah it does! Its by the lugs.
suzook said:
by the lugs
Click to expand...
Click to collapse
You're speaking of the two holes for the mic? Anyway, I'm not intested in the Urbane at all, so it's completely off topic.
What I'm interested in is how often do people with the Huawei watch feel the need to manually change brightness settings.
Crown
So, by hitting the crown three times, the brightness goes up one level?
Also, is the crown button function behavior customizable?
Thanks!
atoy74 said:
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
Click to expand...
Click to collapse
gaikokujin said:
So, by hitting the crown three times, the brightness goes up one level?
Also, is the crown button function behavior customizable?
Thanks!
Click to expand...
Click to collapse
It actually goes to max brightness only until the screen goes back to sleep.
Sent from my SM-T810 using Tapatalk
atoy74 said:
It actually goes to max brightness only until the screen goes back to sleep.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
I see, thanks.
I don't change it often at all. Most of the time 2 or 3 has been plenty bright for me, and the triple click to up it a bit works pretty well...
noraef said:
You're speaking of the two holes for the mic? Anyway, I'm not intested in the Urbane at all, so it's completely off topic.
What I'm interested in is how often do people with the Huawei watch feel the need to manually change brightness settings.
Click to expand...
Click to collapse
Have the watch since tuesday ("Active", ie black, with single layer leather) And I agree: most of the time, 2 or 3 are enough. 1 is actually even too bright to me at night, especially since I'm seemingly unable to have ambient brightness get as low as how bright it is awake at 1 (is ambient brightness level fixed?).
Under direct sunlight, it's not always that easy to see even with the bright 3-click sunlight mode. But generally, twisting my wrist a little to avoid direct reflections, or at worst covering it a bit with my other hand, is enough.
noraef said:
Have the watch since tuesday ("Active", ie black, with single layer leather) And I agree: most of the time, 2 or 3 are enough. 1 is actually even too bright to me at night, especially since I'm seemingly unable to have ambient brightness get as low as how bright it is awake at 1 (is ambient brightness level fixed?).
Click to expand...
Click to collapse
Ambient mode brightness is not configurable on the watch, but certain 3rd-party watchfaces offer this setting. I'm using Skymaster and it offers different brightness for ambient mode.
agentdr8 said:
Ambient mode brightness is not configurable on the watch, but certain 3rd-party watchfaces offer this setting. I'm using Skymaster and it offers different brightness for ambient mode.
Click to expand...
Click to collapse
Does that setting only apply to the actual watch face, or to the whole display? I've managed to make it dimmer with a partially transparent black layer in WatchMaker, but it doesn't apply to cards previews, or icons such as mute...
SWapp True Dark allows for actually adjusting the brightness of the whole ambient display, which is already great, but I'd rather have that manageable through Tasker (to have it auto adjust by time of the day). Have asked João if this could be implemented in AutoWear, so maybe it'll end up manageable through that.
Seems quite crazy to me this setting is not available by default. Reminds me, even though I think Android is the best OS of its kind, how lame I find it without the truckload of customization I lay over it...
I have 8 days ago my Huawei SW. It's my first SmartWatch and I'm really disappointed not to do anything with Tasker and Android Wear to adjust brightness to my liking clock automatically.
On the day I need more brightness when I'm out and at night the minimum brightness of the screen saver is very strong.
The bothers me most at the moment is so intense brightness of screen saver at night. No achievement make it more tenuous. Anyone know if there is any app that you can do?
Hopefully one of the experts and boys of this site something to be developed further manipulate Androi tasker and wear.
I've been using Display Brightness for Wear. It allows for different brightness settings for day and night in different situations. I wish it was more customizable or there were some ways to control brightness with tasker. Unfortunately, I've been unable to find those.
Autowear just needs to be able to receive a message that ambient is selected. It thinks the watch is off instead of in ambient. Frankly, though, SWapp does what I need. I also use WatchMaker faces and customize the dim mode to my liking.
i use Wear Mini Launcher and have it set to show the widgets before the apps, so one swipe to the right gets me a brightness slider. Its very each to adjust this way. With Wear Mini Launcher I can also quickly set my phone to silent/vibrate mode, turn on flashlight, ping the phone even if the phone is on vibrate, etc
brizey said:
Autowear just needs to be able to receive a message that ambient is selected. It thinks the watch is off instead of in ambient. Frankly, though, SWapp does what I need. I also use WatchMaker faces and customize the dim mode to my liking.
Click to expand...
Click to collapse
I {o] [URL]v I they're t5ttpp[emoji12] rr[/URL]way oo{o[oooooo] 599d55t
maximus96 said:
i use Wear Mini Launcher and have it set to show the widgets before the apps, so one swipe to the right gets me a brightness slider. Its very each to adjust this way. With Wear Mini Launcher I can also quickly set my phone to silent/vibrate mode, turn on flashlight, ping the phone even if the phone is on vibrate, etc
Click to expand...
Click to collapse
atoy74 said:
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
Click to expand...
Click to collapse
wait...WAT?! i've never known this...btw it doesn't work with Android Wear 2.0 preview 2
I've thought of something somewhat cool but I'm no developer.
What if we can use our cellphone's ambient light sensor to sync with the watch so that the watch can get both bright and/or dim when needed?
Theoretically this will function correctly if your phone isn't in your pocket all the time.
Sent from my SM-G935T using XDA-Developers mobile app
Can anyone help confirm if they see this behavior with their watch? I have always-on screen set to ON in the Android Wear app. (Tilt to wake and gestures are both OFF.) I have noticed that even on the stock Moon Phase face, if I don't touch the face for a while, the watch goes to sleep. By that I mean, the face is completely black, as if I turned off the always-on screen option.
I haven't determined yet if it's always after a specific amount of time. Seems to be at least 30 min, maybe an hour.
Is this normal behavior? I was under the impression that always on means always on, And that time in dim mode would always show.
You are correct.
bailyc said:
Can anyone help confirm if they see this behavior with their watch? I have always-on screen set to ON in the Android Wear app. (Tilt to wake and gestures are both OFF.) I have noticed that even on the stock Moon Phase face, if I don't touch the face for a while, the watch goes to sleep. By that I mean, the face is completely black, as if I turned off the always-on screen option.
I haven't determined yet if it's always after a specific amount of time. Seems to be at least 30 min, maybe an hour.
Is this normal behavior? I was under the impression that always on means always on, And that time in dim mode would always show.
Click to expand...
Click to collapse
You are correct, always on means always on, the only time the watch should sleep, is when you have it on the charger. You may have a bad install or worst case scenario a bad watch.
vvveith said:
You are correct, always on means always on, the only time to watch should sleep, is when you have it on the charger. You may have a bad install or worst case scenario a bad watch.
Click to expand...
Click to collapse
Ok, thanks for confirming! I definitely have something wrong, then. I've factory reset several times and even taken off most apps, and it still happens. Looks like it might be the watch.
I have similar problem - always ON, gestures off, but after about 10 seconds it changes watchface to some dark/black one.
I believe the Always on Feature is not for having your watch face on all the time, but rather it dims your watch face but you still can tell the time with just the darker screen. It's not going to keep your watch face fully lit if that option is turned on.
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
rbs_uk said:
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
Click to expand...
Click to collapse
Most of the folks that make the WatchMaker faces either just dim the face, or they make a dimmed mode face that looks like it has phosphorous markings. I personally make custom dimmed modes. My favorite method is to make a blood red version of the face with just the essential features. The moon phase ones can look BAD ASS with the blood red moon phase on a pure black background. This is the only watch I have ever actually gotten comments on in public. When people see it they notice that it ain't no normal watch, and it ain't no Apple watch.
rbs_uk said:
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
Click to expand...
Click to collapse
I think the battery life would just be too short if you left the face on all the time, all the time meaning the watch never went into dim mode. Just run tilt on, and don't wear the watch to loose. Especially at night if the watch never dimmed that would get annoying as hell it's so bright.
'god guys, really????
rbs_uk said:
I have similar problem - always ON, gestures off, but after about 10 seconds it changes watchface to some dark/black one.
Click to expand...
Click to collapse
Come on guys you do understand ambient mode right? When the main screen of the watch face shuts down it goes into ambient mode, which is simply black and white. Just like any pure android device. (i.e. Nexus 6) If you do not understand of know of this behaviour please stop posting and do some research. 'The watch is acting as it is suppose to in Android Wear. Just like notifications on a Nexus device. Google is your friend.
So is YouTube and understanding the android system as of today. Come on, get a clue.
Yeah I think if it was on all the time you'd be lucky to get even a few hours of battery life out of it....
falcon26 said:
Yeah I think if it was on all the time you'd be lucky to get even a few hours of battery life out of it....
Click to expand...
Click to collapse
Well, I know what I personally thought was confusing is that "always on" isn't actually always on when charging. When on the charger, display turns off completely after a time. That's different behavior from what I'm used to based on the Moto X, which has AMOLED and still displayed ambient information on the screen when charging/docked. I find it a little odd that there is no built-in charging/docked display that uses the ambient (dimmed) display mode.
But to be sure, my watch definitely had something wrong with it. I just received a replacement unit yesterday, so I'll be testing it out today to see if it's able to stay dimmed as it should when off the charger.
Be attencion with "always on" mode, this is screen after four days (contrast on level 3).
I've had the "Ranger" watch face on with a full colour ambient mode and not experiencing any burn-in. Every minute it shifts the image somewhat in order to reduce any burn in effect. See https://play.google.com/store/apps/details?id=co.smartwatchface.watch.face.ranger.military .
Just to cease any confusion. Always On means the screen is always on. After a few seconds, the screen will dim and go into a black/white ambient mode to reserve power.
The OP says his screen is turning completely off. So it seems there is a problem there. Every Watch face has a different ambient mode. Perhaps the one you are using has a broken ambient mode and not displaying data.
I found the best way to make a watch face is to build one yourself. Purje Black is awesome for this (truely amazing app). I am not going to do a full review but the transition between full on and ambient mode is animated, looks fantastic, has lots of Hotspots to launch various apps like weather, Google Fit data, etc, and displays it in a awesome format.
But the best feature is that you can customize the ambient mode separately from the actual face. They also support community made themes, so just browse their Google Plus theme page, find one you like, customize it to how you want it and save it.
Just be careful with your AMOLED screen that you don't have any information that is static in ambient mode, like numbers, hour marks, etc. I prefer a Digital clock/Calendar date on my Amoled, but have a nice looking analog with various information on my full face.
The device going to sleep is normal. It will go from full on to ambient mode and from there if the watch isn't moved for 30 minutes it will shut the screen off. See below from Google.
"You can set the display to show the time or turn off completely when you're not using the watch. If set to turn off, the screen will turn on when you turn your wrist or touch the screen.*
Tip: Letting your screen turn off when you're not using the watch will help improve battery life. If the watch hasn't moved for 30 minutes, the screen will turn off even if you have it set to remain always on. To wake your watch, tilt it or press the power button."
Sent from my Nexus 6 using Tapatalk
Hi
I'm trying to find an App for my watch that will keep the Watchface in Ambient mode for as long as i like (more than 24Hrs) even when it's not on my hand (not being moved).
Any ideas would be appretiated.
ausi said:
Hi
I'm trying to find an App for my watch that will keep the Watchface in Ambient mode for as long as i like (more than 24Hrs) even when it's not on my hand (not being moved).
Any ideas would be appretiated.
Click to expand...
Click to collapse
First off between the battery hit and possible screen damage I wouldn't recommend that. But I haven't seen any faces or apps that would accomplish this. And since that feature is inherent to wear it would probably take root to accomplish it anyway.
Sent from my Nexus 6 using Tapatalk
crawrj said:
First off between the battery hit and possible screen damage I wouldn't recommend that. But I haven't seen any faces or apps that would accomplish this. And since that feature is inherent to wear it would probably take root to accomplish it anyway.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thanks, i have root..........but still cannot find an App to do this, i still would like to try.
Ho about limiting brightness to lower level than level 1. While I,m not using watch, just before it goes to ambient, I can See brightness dimmed to lower than minimum and after, ambient turns on, whitch is brighter. What can i do to use lowest levels all the time?
Stay Lit Wear
In case you haven't found it yet, search Google Play for "Stay Lit Wear."
Are there any watch faces that keep showing the seconds ticking even in dimmed mode? Or is it a limitation in android wear?
BoatA said:
Are there any watch faces that keep showing the seconds ticking even in dimmed mode? Or is it a limitation in android wear?
Click to expand...
Click to collapse
I don't know if it's allowed in the apps or not, but even if it was you're battery life would go to crap in a hurry.
I have not see one. But agree, that would be a battery hit.
Sure, but I get 2,5 days of battery (always on, using only watch faces that doesn't dim but stops the ticking, turning the watch off at night) so I'd like to test running it with the ticking and see if I got through a day. I'd say it'd be worth a try.
BoatA said:
Are there any watch faces that keep showing the seconds ticking even in dimmed mode? Or is it a limitation in android wear?
Click to expand...
Click to collapse
It is not a wear limitation. I haven't see any ready-made watch faces which show the second hand ticking even in the dimmed mode. But you can use a tool like Watchmaker to create such a watchface (or use some existing Watchmaker watch face and customise it) to show the ticking second had. No idea how much of an extra drain it will be on your battery though.
smjoshi said:
It is not a wear limitation. I haven't see any ready-made watch faces which show the second hand ticking even in the dimmed mode. But you can use a tool like Watchmaker to create such a watchface (or use some existing Watchmaker watch face and customise it) to show the ticking second had. No idea how much of an extra drain it will be on your battery though.
Click to expand...
Click to collapse
Are you sure you can actually customize the watch faces in Watchmaker to show the ticking of the seconds? I've done a few customizations in Watchmaker but I haven't found a way to keep showing the seconds. If you know of a way, let me know
BoatA said:
Are you sure you can actually customize the watch faces in Watchmaker to show the ticking of the seconds? I've done a few customizations in Watchmaker but I haven't found a way to keep showing the seconds. If you know of a way, let me know
Click to expand...
Click to collapse
You are right. My mistake. You can make it "show" the second hand in the dim mode by setting "Always Show" but not make it tick once the dim mode kicks in. Readson I was fooled is - on your mobile where you are editing the watchface there is a button which helps you simulate the bright and dim modes to let you see what the face may look like on the watch. When you press this button to simulate teh dim mode, for the face I was working on the second hand continued to tick. but once I transfered the face to the watch it stopped ticking!
smjoshi said:
You are right. My mistake. You can make it "show" the second hand in the dim mode by setting "Always Show" but not make it tick once the dim mode kicks in. Readson I was fooled is - on your mobile where you are editing the watchface there is a button which helps you simulate the bright and dim modes to let you see what the face may look like on the watch. When you press this button to simulate teh dim mode, for the face I was working on the second hand continued to tick. but once I transfered the face to the watch it stopped ticking!
Click to expand...
Click to collapse
Yes, that was the conclusion I too arrived at. It's a little surprising that Watchmaker doesn't simply have a non-dimmed mode option.
And even more surprising that Watchmaker lacks a backup option
I used Styler. They have a "full ambient" mode that displays animations and additional details. It basically is a black amd white version of the actual watch face.
Purje Black allows multiple settings for ambient mode such as high and low modes.