Related
When in the car, I would like my screen to stay on when charging.
I found a way to do this by going to Settings -> Applications -> Development -> Stay Awake
However the screen may stay on, but it still dims after X minutes (depending on the Time-out settings) so i cant see a thing on my phone during daytime.
I can ofcourse set the time-out to 30 minutes, but i dont want my screen to stay on full brightness for 30 mins when its NOT charging!
Anyone got an idea?
Thanks!
Setting profiles mate. You can set different profiles for when it is charging, including keeping the screen on, and when you unplug it, it goes back to normal. I've been using it for quite a while and it works spot on
Cheers
Ian
-------------------------------------
Sent via the XDA Tapatalk App
Sorry I'm a bit of a Droid newb. On my old 6,5 winmo there was a slider for brightness on battery and brightness on charge.
Is this profile setting stashed within the settings somewhere or is it an app?
Thanks for your help
Another way of doing this is to activate car dock mode when you're in the car. There are some apps that allow you to manually activate various dock modes, and I think when in car dock mode the screen stays on all the time at full brightness.
The app I used is called 'dock simulator' or something like that on the market, and it's free.
Sweet thanks. Any idea how to lose the logo?
Open settings, applications, development, and tick always on when charging, nice and easy
cgrec92 said:
Open settings, applications, development, and tick always on when charging, nice and easy
Click to expand...
Click to collapse
Yea but as already said in post 1 the screen dims.
found a problem with the dock app where it puts calls out on the loudspeaker, and you get the icon.... damn!
you can always download power manager from the market and set to never dim/timeout
Yes but then it eats the battery
[email protected] said:
Yes but then it eats the battery
Click to expand...
Click to collapse
Ok seriously what's wrong with you you've started a thread cos ur screen dims, get use to it! Of course if you keep your screen on your battery will die quick you can't have everything
I agree this is annoying, when you have the phone plugged into the charger it would be great if the screen didn't dim, happens sometimes when I'm reading ebooks on my phone, don't want to change the dim settings as I want the screen timeout to kick in when not plugged into the charger.
Is there any app that wont let the cpu go to sleep when the screen is turned off and wifi is running with file transfer? cuz no matter which program i try. Transfer speed always slows down to 40% once monitor off. I think the cpu is downclocked.
=cgrec92;6887568]Ok seriously what's wrong with you you've started a thread cos ur screen dims, get use to it! Of course if you keep your screen on your battery will die quick you can't have everything
Click to expand...
Click to collapse
Sorry I thought this was a forum to help people over come issues. looks like you may be in the right place.
1. I never started the thread
2. the initial thread was started by some who has the same problem as me. This means I am not the only one with the problem and maybe it's worth solving
3. The thread was started because on power, in the car the screen dims and I want it bright as I can't see it in the sun. I want an app or a setting so when the device detects its on power it does not dim the screen.
quote from post 1
"I can of course set the time-out to 30 minutes, but i don't want my screen to stay on full brightness for 30 mins when its NOT charging!"
I know this is possible because dock simulator does this but has unwanted side effects ( phone on loudspeaker ) I know I could just fix the brightness on every visit to the car but this is a pain in the ass and I will forget to disable it and flatten my battery.
I could do this on win mo 6.5 and android is a much more flexible operating system.
Sorry if this post covered old ground but I found your last post rather provoking and I would prefer if you directed similar posts, elsewhere.
Thanks to everyone else who has guided in the right direction so far..
I have the same problem and when I asked before I got the same (none) answers.
It is one of the very few flaws I have with Android.
On WiMo I could leave the browser with the traffic site active and VISIBLE in my car charger and I could hit refresh now with android I have to touch the screen to activate the backlight and then refresh the site if I want an update.
I too just want the backlight to stay on ONLY when the phone is on external power, it can't be that hard and it shouldn't involve installing elaborate programs that consume more of the little precious memory I have left (until FroYo ...)
try an app called 'Caffine' from the marketplace its free and does the job perfectly
Thanks I'll give it a try.
Has anyone noticed that their auto brightness is kind of broken after upgrading to JB? For example, if I'm in a really bright area and go into dark, the screen does not dim itself, however this can be fixed by going into settings and un-checking and checking the auto brightness box.
Obviously this is pretty annoying... Is there a fix for this?
CoronaDelux said:
Has anyone noticed that their auto brightness is kind of broken after upgrading to JB? For example, if I'm in a really bright area and go into dark, the screen does not dim itself, however this can be fixed by going into settings and un-checking and checking the auto brightness box.
Obviously this is pretty annoying... Is there a fix for this?
Click to expand...
Click to collapse
I've noticed the same. It stays bright a lot of the time in dark places. I haven't noticed it staying dim in sunlight though.
To me, the way it was before seemed broken. It would constantly change its brightness level. This was effected by the light reflected off clothing, etc
I love it now
wirelessFREAK said:
To me, the way it was before seemed broken. It would constantly change its brightness level. This was effected by the light reflected off clothing, etc
I love it now
Click to expand...
Click to collapse
You seem to have very good taste in clothing....
MatAuc12 said:
You seem to have very good taste in clothing....
Click to expand...
Click to collapse
He he good one
But I Dont find any issue with it either. In fact, if you dig in, you'll find the process consumes 30% lesser battery than before ie. Screen + sensor timing and refresh for both...
Sent from my Galaxy Nexus using xda app-developers app
CoronaDelux said:
Has anyone noticed that their auto brightness is kind of broken after upgrading to JB? For example, if I'm in a really bright area and go into dark, the screen does not dim itself, however this can be fixed by going into settings and un-checking and checking the auto brightness box.
Obviously this is pretty annoying... Is there a fix for this?
Click to expand...
Click to collapse
I'm actually pretty sure this is the default behaviour for ICS as well its only 3rd party roms that added in the ability to auto dim as well as auto bright the stock way is it only goes dimmer if the screen turns off and back on other wise it stays at the maximum brightness
Sometimes if I'm using the widget to move from full to auto brightness and tap very fast, it'll sit at full brightness. If I toggle slower its fine. Definitely some bug there.
I think auto brightness is much better in 4.1.1. Before it was far too dim, now it seems just right in all conditions.
I'm using the app "Lux Auto Brightness" and it couldn't be doing a better job.
Definitely check it out if you're unhappy like I was with the stock auto-brightness
Sent from my Galaxy Nexus using xda premium
that has been the default behaviour from ages for stock goole rom:
the autobrightness only can increase...it doesn't decrease, unless u lock and ulock the phone or check and uncheck autobrightness
that the intended behaviour google want..the brightness get increased, but not decrease..
So you're saying that the auto feature in 4.0.4 was broken then?
CoronaDelux said:
So you're saying that the auto feature in 4.0.4 was broken then?
Click to expand...
Click to collapse
i said that the intented behaviour..yes also on 4.0.4.. maybe google have a valid reason for doing that
CoronaDelux said:
So you're saying that the auto feature in 4.0.4 was broken then?
Click to expand...
Click to collapse
Yes, it delayed the lock screen and when I set my phone down under a bright lamp and it woke up hours later in pure darkness, it might soft reset.
happens to me as well on stock 4.1.1. if I'm in a dark room and put the phone under a lamp or something, the brightness goes up instantly, but it never comes down until I lock/unlock the screen again.
in fact most of the time I think the thing is too bright (but that may be because I come from a nexus one always on the lowest setting since the autobrightness there didnt really work well).
it's a minor annoyance definitely
Same Problem with Note2!
Hi guys,
found this thread during my search for this brightness issue. My Galaxy Note 2 has the same strange behavior. But I figured out something: when I lay down the device to a table or bring it to 0 degrees in my hand, automatic brightness it's decreasing perfectly! Can you confirm this behaviour at your nexus? I guess it's a kind of strange Samsung " feature", maybe?
Thanks, Michael
Ahoy, I was also researching my auto brightness issues when I found this thread. I can confirm the behavior from the previous post on my SGS2 on Jelly Bean 4.1.2.
If the phone is in vertical position and I do the lamp test, it will stay on maximum brightness no matter what, but in horizontal position dimming works perfectly.
Regards,
zytrel.
So I've finally had the chance to play with one of these watches extensively, and I am baffled by ambient mode.
It's not that it still turns off sometimes; that makes perfect sense. What's wrong with it is that it doesn't actually update even when the screen is on.
Test it yourself. Use the default watch face, enable ambient mode, and go in a completely dark room. You can leave the watch still or move it about, just don't let it act as if you're raising your arm and brighten the display.
Watch it for two or three minutes, and you'll notice that even though the screen remains on, it never updates -- the minute hand never moves, and so it doesn't actually show the right time very quickly after it dims. (This is with the official, default watch face, a just-rest watch, the latest firmware installed, and plenty of battery remaining.)
When the screen turns on from a raise or tap in ambient mode, you can actually see the minute hand jump forward several minutes in one go. Even with ambient mode disabled, the watch still turns on automatically with the raise gesture, and it takes no longer to do so than it does in ambient mode.
That implies there is no reason to use it other than vanity. After all, in the brief time before the backlight comes on the watch shows the wrong time, and it doesn't actually show the right time any faster than it would have.
But it's not really a vanity mode either, because except in a very dark place, the dimmed screen is indistinguishable from a powered off one to those standing near you. So you're wasting power, but still look like you have a blank screen on your wrist.
So what, precisely, is the point? It seems to me to add no benefit, just to waste battery. I'm baffled.
Sent from my Nexus 10 using Tapatalk
I played with Ambient Mode a little before the recent update, but battery life just wasn't sufficient to keep it on. After the update, battery life improved enough for Ambient Mode, so I switched it on. I dealt with it a couple days, then ultimately turned it off for this very reason. It just seemed clunky to me, and as you stated, I'd often glance at my wrist only to see the wrong time until suddenly the watch came fully on and updated.
I was excited for Ambient mode, but like you, I no longer see the point. I'd rather just have a user-controllable setting for "fully on" sensitivity. If I could make my 360 just a little more sensitive to my raising my wrist action, it'd be perfect without Ambient Mode.
I wish I could have the screen on all the time in some cases.. like if you go to someplace classy, i would have the face on all the time displaying the watch face. Thats just me.
I've seen the screen update while it was dim. I do think that it is too dim to use outside like you mentioned.
I noticed this as well. Surely just a bug or an issue with android wear that will be fixed at some point. I'm also sure they will provide a lot more features to regulate screen controls, on, off, brightness, etc in future updates. It's just a matter of time.
I look at it this way... the sensor is kind of future proof if anything. Might not be very useful now, but could have a lot of potential in the next few months or once custom ROM's start rolling out.
Android wear is still in the early stages. It can only get better. Just be patient, we are early adopters on first generation hardware.
tlxxxsracer said:
I wish I could have the screen on all the time in some cases.. like if you go to someplace classy, i would have the face on all the time displaying the watch face. Thats just me.
Click to expand...
Click to collapse
Here is a way you can set the screen on all the time:
http://forum.xda-developers.com/showthread.php?p=55311726
knoxploration said:
So I've finally had the chance to play with one of these watches extensively, and I am baffled by ambient mode.
It's not that it still turns off sometimes; that makes perfect sense. What's wrong with it is that it doesn't actually update even when the screen is on.
Test it yourself. Use the default watch face, enable ambient mode, and go in a completely dark room. You can leave the watch still or move it about, just don't let it act as if you're raising your arm and brighten the display.
Watch it for two or three minutes, and you'll notice that even though the screen remains on, it never updates -- the minute hand never moves, and so it doesn't actually show the right time very quickly after it dims. (This is with the official, default watch face, a just-rest watch, the latest firmware installed, and plenty of battery remaining.)
When the screen turns on from a raise or tap in ambient mode, you can actually see the minute hand jump forward several minutes in one go. Even with ambient mode disabled, the watch still turns on automatically with the raise gesture, and it takes no longer to do so than it does in ambient mode.
That implies there is no reason to use it other than vanity. After all, in the brief time before the backlight comes on the watch shows the wrong time, and it doesn't actually show the right time any faster than it would have.
But it's not really a vanity mode either, because except in a very dark place, the dimmed screen is indistinguishable from a powered off one to those standing near you. So you're wasting power, but still look like you have a blank screen on your wrist.
So what, precisely, is the point? It seems to me to add no benefit, just to waste battery. I'm baffled.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Just watched mine move the minutes hand just fine in ambient mode... this is with the classic Motorola face.
https://www.youtube.com/watch?v=HsTpDpgYwFY
I have started using ambient mode for the first time in a bright office environment and noticed that at random times the display completely turns off. It turns back on once I move my hand ever so slightly. For me Ambient Mode should always be on regardless of lighting condition and watch orientation.
zarks said:
I have started using ambient mode for the first time in a bright office environment and noticed that at random times the display completely turns off. It turns back on once I move my hand ever so slightly. For me Ambient Mode should always be on regardless of lighting condition and watch orientation.
Click to expand...
Click to collapse
I thought it would stay on the dimmed mode the whole time too... but like you said it turns on with even the slightest rotation of the wrist now, and that means we can finally glance at the watch and see the time!
:good:
The minuets do update in real time so idk what you're seeing?
This observation definitely needs to be settled because we have 2 conflicting reports here. Some of you are claiming the watch does not update the time even when the screen is on unless you fully wake the screen. Others are saying it updates just fine, so what gives?
FYI my G watch always displays the correct time, even when dimmed, so I dont think it's an Android Wear problem. Sounds kinda like additional battery conservation steps by Moto. They are essentially sleeping the CPU so that there is just enough juice remaining to keep the screen on for 16+ hours. I just dont understand how some of you are experiencing this and others are not.
for me, in ambient mode, the screen still turns off after a while. but it turns back on much quicker than with ambient mode off. it often takes an exaggerated bring-up-arm movement to turn on the screen with ambient off. i used to resort to tapping the screen instead. with ambient on the battery still last me a "work day". off charger at 7AM and dies around 10PM or so...battery lasts longer with stock faces compared to Facer faces...
Most developer purposes.
My ambient mode used to stay on all the time now it turns off the screen..
ws6kid said:
My ambient mode used to stay on all the time now it turns off the screen..
Click to expand...
Click to collapse
I just started using it and noticed the screen stays on if you keep it flat horizontal, but if you turn your wrist past 45 degrees it turns off.
Maybe they added that with the update, did ambient mode used to stay on even when that watch is sideways?
Ambient is so useless for me, the screen is almost off all the time... So frustrating coming from a g watch
RunNgun42 said:
This observation definitely needs to be settled because we have 2 conflicting reports here. Some of you are claiming the watch does not update the time even when the screen is on unless you fully wake the screen. Others are saying it updates just fine, so what gives?
FYI my G watch always displays the correct time, even when dimmed, so I dont think it's an Android Wear problem. Sounds kinda like additional battery conservation steps by Moto. They are essentially sleeping the CPU so that there is just enough juice remaining to keep the screen on for 16+ hours. I just dont understand how some of you are experiencing this and others are not.
Click to expand...
Click to collapse
For me, I believe I have seen my watch 'get stuck' maybe once or twice where the time on the dim screen wasn't the same as I had on my computer. This could just be a difference in the clocks, as whenever I check both my phone and my dim watch together, they are the same. Like RunNgun42 said, I think it might be a thing where the proc is in sleep mode to try and save power and isn't keeping up the time as accurately as it could. Once you shake it though and the screen lights up again, the proc will come out of sleep and maintain more accurate timekeeping.
Isn't there a screen always on option in the android wear app?
And yes ambient mode still turns off when the watch is at an angle consistent with being down at your side or is completely still.
SilentAce07 said:
Isn't there a screen always on option in the android wear app?
Click to expand...
Click to collapse
No, you can't keep the screen on at all times out of the box, but some 3rd party software can do it...
Ambient mode is a lot quicker to wake up and react than non-ambient, it's a lot more accurate (non-ambient often stays off when I turn my arm to look at the time), it's easier to see what time it is, and it acts a lot more like a conventional watch- the display is on when you need it.
Battery drain is not a biggie, I get through the day, every day.
Can anyone help confirm if they see this behavior with their watch? I have always-on screen set to ON in the Android Wear app. (Tilt to wake and gestures are both OFF.) I have noticed that even on the stock Moon Phase face, if I don't touch the face for a while, the watch goes to sleep. By that I mean, the face is completely black, as if I turned off the always-on screen option.
I haven't determined yet if it's always after a specific amount of time. Seems to be at least 30 min, maybe an hour.
Is this normal behavior? I was under the impression that always on means always on, And that time in dim mode would always show.
You are correct.
bailyc said:
Can anyone help confirm if they see this behavior with their watch? I have always-on screen set to ON in the Android Wear app. (Tilt to wake and gestures are both OFF.) I have noticed that even on the stock Moon Phase face, if I don't touch the face for a while, the watch goes to sleep. By that I mean, the face is completely black, as if I turned off the always-on screen option.
I haven't determined yet if it's always after a specific amount of time. Seems to be at least 30 min, maybe an hour.
Is this normal behavior? I was under the impression that always on means always on, And that time in dim mode would always show.
Click to expand...
Click to collapse
You are correct, always on means always on, the only time the watch should sleep, is when you have it on the charger. You may have a bad install or worst case scenario a bad watch.
vvveith said:
You are correct, always on means always on, the only time to watch should sleep, is when you have it on the charger. You may have a bad install or worst case scenario a bad watch.
Click to expand...
Click to collapse
Ok, thanks for confirming! I definitely have something wrong, then. I've factory reset several times and even taken off most apps, and it still happens. Looks like it might be the watch.
I have similar problem - always ON, gestures off, but after about 10 seconds it changes watchface to some dark/black one.
I believe the Always on Feature is not for having your watch face on all the time, but rather it dims your watch face but you still can tell the time with just the darker screen. It's not going to keep your watch face fully lit if that option is turned on.
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
rbs_uk said:
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
Click to expand...
Click to collapse
Most of the folks that make the WatchMaker faces either just dim the face, or they make a dimmed mode face that looks like it has phosphorous markings. I personally make custom dimmed modes. My favorite method is to make a blood red version of the face with just the essential features. The moon phase ones can look BAD ASS with the blood red moon phase on a pure black background. This is the only watch I have ever actually gotten comments on in public. When people see it they notice that it ain't no normal watch, and it ain't no Apple watch.
rbs_uk said:
Well, then I`m selling mine. Why would I want all them beautiful watchfaces if I can`t have them always on?! That`s just stupid.
Click to expand...
Click to collapse
I think the battery life would just be too short if you left the face on all the time, all the time meaning the watch never went into dim mode. Just run tilt on, and don't wear the watch to loose. Especially at night if the watch never dimmed that would get annoying as hell it's so bright.
'god guys, really????
rbs_uk said:
I have similar problem - always ON, gestures off, but after about 10 seconds it changes watchface to some dark/black one.
Click to expand...
Click to collapse
Come on guys you do understand ambient mode right? When the main screen of the watch face shuts down it goes into ambient mode, which is simply black and white. Just like any pure android device. (i.e. Nexus 6) If you do not understand of know of this behaviour please stop posting and do some research. 'The watch is acting as it is suppose to in Android Wear. Just like notifications on a Nexus device. Google is your friend.
So is YouTube and understanding the android system as of today. Come on, get a clue.
Yeah I think if it was on all the time you'd be lucky to get even a few hours of battery life out of it....
falcon26 said:
Yeah I think if it was on all the time you'd be lucky to get even a few hours of battery life out of it....
Click to expand...
Click to collapse
Well, I know what I personally thought was confusing is that "always on" isn't actually always on when charging. When on the charger, display turns off completely after a time. That's different behavior from what I'm used to based on the Moto X, which has AMOLED and still displayed ambient information on the screen when charging/docked. I find it a little odd that there is no built-in charging/docked display that uses the ambient (dimmed) display mode.
But to be sure, my watch definitely had something wrong with it. I just received a replacement unit yesterday, so I'll be testing it out today to see if it's able to stay dimmed as it should when off the charger.
Be attencion with "always on" mode, this is screen after four days (contrast on level 3).
I've had the "Ranger" watch face on with a full colour ambient mode and not experiencing any burn-in. Every minute it shifts the image somewhat in order to reduce any burn in effect. See https://play.google.com/store/apps/details?id=co.smartwatchface.watch.face.ranger.military .
Just to cease any confusion. Always On means the screen is always on. After a few seconds, the screen will dim and go into a black/white ambient mode to reserve power.
The OP says his screen is turning completely off. So it seems there is a problem there. Every Watch face has a different ambient mode. Perhaps the one you are using has a broken ambient mode and not displaying data.
I found the best way to make a watch face is to build one yourself. Purje Black is awesome for this (truely amazing app). I am not going to do a full review but the transition between full on and ambient mode is animated, looks fantastic, has lots of Hotspots to launch various apps like weather, Google Fit data, etc, and displays it in a awesome format.
But the best feature is that you can customize the ambient mode separately from the actual face. They also support community made themes, so just browse their Google Plus theme page, find one you like, customize it to how you want it and save it.
Just be careful with your AMOLED screen that you don't have any information that is static in ambient mode, like numbers, hour marks, etc. I prefer a Digital clock/Calendar date on my Amoled, but have a nice looking analog with various information on my full face.
The device going to sleep is normal. It will go from full on to ambient mode and from there if the watch isn't moved for 30 minutes it will shut the screen off. See below from Google.
"You can set the display to show the time or turn off completely when you're not using the watch. If set to turn off, the screen will turn on when you turn your wrist or touch the screen.*
Tip: Letting your screen turn off when you're not using the watch will help improve battery life. If the watch hasn't moved for 30 minutes, the screen will turn off even if you have it set to remain always on. To wake your watch, tilt it or press the power button."
Sent from my Nexus 6 using Tapatalk
Hi
I'm trying to find an App for my watch that will keep the Watchface in Ambient mode for as long as i like (more than 24Hrs) even when it's not on my hand (not being moved).
Any ideas would be appretiated.
ausi said:
Hi
I'm trying to find an App for my watch that will keep the Watchface in Ambient mode for as long as i like (more than 24Hrs) even when it's not on my hand (not being moved).
Any ideas would be appretiated.
Click to expand...
Click to collapse
First off between the battery hit and possible screen damage I wouldn't recommend that. But I haven't seen any faces or apps that would accomplish this. And since that feature is inherent to wear it would probably take root to accomplish it anyway.
Sent from my Nexus 6 using Tapatalk
crawrj said:
First off between the battery hit and possible screen damage I wouldn't recommend that. But I haven't seen any faces or apps that would accomplish this. And since that feature is inherent to wear it would probably take root to accomplish it anyway.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thanks, i have root..........but still cannot find an App to do this, i still would like to try.
Ho about limiting brightness to lower level than level 1. While I,m not using watch, just before it goes to ambient, I can See brightness dimmed to lower than minimum and after, ambient turns on, whitch is brighter. What can i do to use lowest levels all the time?
Stay Lit Wear
In case you haven't found it yet, search Google Play for "Stay Lit Wear."
Has anyone noticed that ambient display lights up upon receiving a notification but does not continue to flash like it did on previous nexus? Also it does not flash on upon picking up the device.....
I have ambient display turned on but to be honest I'm not sure my notifications even show once but I'm certain they don't show again.
Sent from my Pixel XL using XDA-Developers mobile app
Came to post this myself. It looks like Ambient Display pops up when you get the notification then never again.
Coming from Moto Display, super disappointed. I was prepared to give up the "wave" to trigger IR sensors and pulse my notifications... I wasn't prepared to give up the feature all together!
Running into the same thing. The ambient display should flash the time, date etc when picking up the phone . Maybe just a late software bug?
Not sure how many others have seen this yet...Notification LED. Mine is getting delivered today so I haven't been able to play around with it yet. It might help with the ambient display issue.
https://www.google.com/amp/amp.andr...otification-light?client=ms-android-sprint-us
lgldrgdlr said:
Not sure how many others have seen this yet...Notification LED. Mine is getting delivered today so I haven't been able to play around with it yet. It might help with the ambient display issue.
https://www.google.com/amp/amp.andr...otification-light?client=ms-android-sprint-us
Click to expand...
Click to collapse
Unfortunately that doesnt help
The display turns on it uses the battery.
I hope they never "fix" it.
I pickup the device right hand let my finger touch the finger print sensor if I want to see the display.
AstroDigital said:
The display turns on it uses the battery.
I hope they never "fix" it.
I pickup the device right hand let my finger touch the finger print sensor if I want to see the display.
Click to expand...
Click to collapse
That is an argument for disabling Ambient Display. Not for hoping that Ambient Display doesn't work like it's supposed to in the first place.
Celeras said:
That is an argument for disabling Ambient Display. Not for hoping that Ambient Display doesn't work like it's supposed to in the first place.
Click to expand...
Click to collapse
Right and I say three things.
1) Why when you lift it is it supposed to turn on ? Did Google ever say? When you pickup you phone the Display should turn on, because we know you careless about battery life.
2) When you pick up you phone why is it so hard to brush your finger on the finger print scanner if you want to display on ?
3) You think every time the phone moves and the display turns on it is not going to use more current, drain the battery ?
If Google ever allows you to turn on the display with just movement picking the phone up.
I hope Google allows people that think 2) and 3) are true to keep this "feature off"
AstroDigital said:
Right and I say three things.
1) Why when you lift it is it supposed to turn on ? Did Google ever say? When you pickup you phone the Display should turn on, because we know you careless about battery life.
2) When you pick up you phone why is it so hard to brush your finger on the finger print scanner if you want to display on ?
3) You think every time the phone moves and the display turns on it is not going to use more current, drain the battery ?
If Google ever allows you to turn on the display with just movement picking the phone up.
I hope Google allows people that think 2) and 3) are true to keep this "feature off"
Click to expand...
Click to collapse
I'll try to spell it out for you since you apparently lack the capacity to do it yourself.
Ambient Display currently does nothing. It flashes once and is gone forever, which is completely useless. You LIKE it doing nothing. Fine. Then you can turn it off and it will still do nothing. You are happy either way.
There are people who like Ambient Display when it actually works. These people are not happy that it doesn't currently do anything. If it is fixed, then they are happy. If it is fixed, you can disable it, and you are still happy because you weren't getting anything from it in the first place.
Your twisted desire to hope something doesn't work because you don't like it is asinine.
Have a good day.
Celeras said:
I'll try to spell it out for you since you apparently lack the capacity to do it yourself.
Ambient Display currently does nothing. It flashes once and is gone forever, which is completely useless. You LIKE it doing nothing. Fine. Then you can turn it off and it will still do nothing. You are happy either way.
There are people who like Ambient Display when it actually works. These people are not happy that it doesn't currently do anything. If it is fixed, then they are happy. If it is fixed, you can disable it, and you are still happy because you weren't getting anything from it in the first place.
Your twisted desire to hope something doesn't work because you don't like it is asinine.
Have a good day.
Click to expand...
Click to collapse
^^ This ^^ Because if you don't like it...then you turn it off.
Youtube link - https://youtu.be/aZREEM08Zfs
Ambient Notification Issue
Also please report this in the official thread (you can just click the star at the bottom without entering text): https://code.google.com/p/android/issues/detail?id=226350&thanks=226350&ts=1477484991