Related
[ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - PURE KITKAT) WORKING on CANVAS 4
Unofficial Cyanogenmod 11 For Micromax Canvas 4 A210
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
This ROM is Built for Wiko Stairway Which is Clone of Micromax A210 by chrmhoffmann. I will help you to enjoy this on our phone.
Check Out the Original Thread and Press Thanks for His Unbelievable work HERE
Instructions.
1.First download CWM RECOVERY FOR THIS ROM
2.using mobile uncle tools app from play store flash it onto your phone
3.after the successful flash of recovery it is time to download CM11 ROM
4.once downloaded , go to your PC and extract the ROM using winrar
5.After the extraction
go into META INF > COM >GOOGLE >updater script
and delete that updater script
6.paste the updater script in the same folder provided below in next section and
7. select all folders(CTRL + A) in the main directory where meta inf and system and all are ..
and then right click and add them to archive using WINRAR
and select zip as for archive type
8.after zipping is done just place the ROM in your sd card
and flash it
as
in recovery mode
select wipe data /factory reset
select mounts and storage
format system
go back and in advanced and select wipe dalvik cache
and then
install zip via sd card
and reboot
and ENJOY!
Downloads
1.Unofficial Cyanogenmod 11 Version 0.17
2.CWM Recovery which Needs to be Used.
4.Updater Script which Needs to Flash
5.Gapps
THIS THREAD IS NOW BEEN ABANDONED AND IS NO LONGER IN DEVELOPMENT BUT THE WORK MAY BE USED FOR FURTHER DEVELOPMENT
NO LONGER TAKEN CARE OF AS I HAVE A NEW DEVICE NOW
XDA:DevDB Information
[ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - ) WORKING on CANVAS 4 ABANDONED, ROM for the Micromax Canvas 4 A210
Contributors
yogesh.kalyana, chrmhoffmann
Source Code: http://forum.xda-developers.com/showthread.php?t=2676086
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CYANOGENMOD
Version Information
Status: Abandoned
Current Beta Version: 0.16
Beta Release Date: 2014-09-18
Created 2014-09-18
Last Updated 2015-09-22
Reserved
Credits.
1. @chrmhoffmann For ROM
2. @NeroD
3. @HACKLEAKS (Rahil Jain)
4. @007jigar
Reserved
Bugs Known.
2nd sim card 3G switch
- Dual SIM is a WIP, not has some bugs (data connection instability, etc.)
- camera for "movies" does not work
- (hw) video en/decoding not enabled
-
- FM radio not available
- A-GPS does not work, GPS works though but slowish
Changelog CM11 0.19:
- sync with CM
- enable CWM to install from cmupdater
Changelog CM11 0.18
- sync with CM
- remove MTK audio policy and use default
- increase BT a2dp MTU (does it help?)
Changelog CM11 0.17
- sync with CM
- first attempt to make BT work: a2dp, car and file transfer seem to work
FAQ
This ROM is Still in Beta Stage so Install it at on your OWN RISK. If you find any Bugs other than above, Dont cry instead Report them so the dev can look at them.
1. To Enable MultiSim
Code:
su
setprop persist.radio.multisim.config dsds
2. To Disable MultiSim
Code:
su
setprop persist.radio.multisim.config none
RESERVED
Here I will Share Some awesome MODS or APPS or THEMES for this ROM in the Feature.
Hit Thanks if I helped.
[MOD][CM11]Real Xperia Z2 Lockscreen for Cyanogenmod 11 by NERO D
http://forum.xda-developers.com/can...-xperia-z2-lockscreen-cyanogenmod-11-t2884690
a lot of thanks to nero d
CM 4 ????
is this 4.4.2 or 4,4,4
and CM4 ........... ????????? really
satsmagic said:
is this 4.4.2 or 4,4,4
and CM4 ........... ????????? really
Click to expand...
Click to collapse
don't you see on top it's highlighted on the top ! 4.4.2
Thank You
Thank You, Yogesh...
I was trying to locate the recovery.img for the previous versions.
Regards and Wishes
Kannan
yogesh.kalyana said:
don't you see on top it's highlighted on the top ! 4.4.2
Click to expand...
Click to collapse
the post title says 4.4.4
also post title says CM11 and OP says CM4
yup sorry !
satsmagic said:
the post title says 4.4.4
also post title says CM11 and OP says CM4
Click to expand...
Click to collapse
my bad mistake , edited now!
thanks mate
yogesh.kalyana said:
my bad mistake , edited now!
thanks mate
Click to expand...
Click to collapse
you are welcome buddy, thanks for all the testing you do for the gr88 developers here
Good this was needed as people didnt know to use stairway build on A210.
Corrections needed 1.Bro its 4.4.4 not 4.4.2.
2.Rename thread to same thread as wiko stairway just change wiko stairway to Micromax A210. And highlight the Instructions.
3.Latest ROM is 0.16. Link- https://goo.im/devs/chrmhoffmann/wiko/cm-11_stairway-ota-UNOFFICIAL-FULLOFBUGS-0.16.zip/
4.Latest Recovery is 0.15 link http://goo.im/devs/chrmhoffmann/wiko//cwm-recovery-wiko-stairway-kk-0.5.img
5.Specify the bugs and make a proper Bug List.
6.Add the Multisim enable/disable commands from original thread.
7. Add Credits Section. Add Mentions of chrmhoffmann and other 3 guys u written.
Status 7
Yogesh,
I get error Status-7
Regards
kannan
satsmagic said:
you are welcome buddy, thanks for all the testing you do for the gr88 developers here
Click to expand...
Click to collapse
Thank you, the goo site does not always work, you can not download the recovery, can someone please put it somewhere else?
thank you
Use firfox!
chuppito said:
Thank you, the goo site does not always work, you can not download the recovery, can someone please put it somewhere else?
thank you
Click to expand...
Click to collapse
it is working for me on all time
just use firefox on PC!
OK!
NeroD said:
Good this was needed as people didnt know to use stairway build on A210.
Corrections needed 1.Bro its 4.4.4 not 4.4.2.
2.Rename thread to same thread as wiko stairway just change wiko stairway to Micromax A210. And highlight the Instructions.
3.Latest ROM is 0.16. Link- https://goo.im/devs/chrmhoffmann/wiko/cm-11_stairway-ota-UNOFFICIAL-FULLOFBUGS-0.16.zip/
4.Latest Recovery is 0.15 link http://goo.im/devs/chrmhoffmann/wiko//cwm-recovery-wiko-stairway-kk-0.5.img
5.Specify the bugs and make a proper Bug List.
6.Add the Multisim enable/disable commands from original thread.
7. Add Credits Section. Add Mentions of chrmhoffmann and other 3 guys u written.
Click to expand...
Click to collapse
1.4.4.4 edited
2.thread name : the original devis okay with that
3. and 4 th links updated
5.bugs : need your help for that to specify all the bugs
6.multisim posted
7.CREDITS GIVEN
yogesh.kalyana said:
it is working for me on all time
just use firefox on PC!
Click to expand...
Click to collapse
I have finally come to the download ... Thanks I test
Can you give screenshots..
Prometheus1408 said:
Can you give screenshots..
Click to expand...
Click to collapse
Screenshots Pls!!
Sent from my D6503
Ashok sha said:
Screenshots Pls!!
Sent from my D6503
Click to expand...
Click to collapse
Why dont you need screenshots for Cyanogenmod 11 they are same as any other cm11 rom. Google for it.
Finally the first kitkat 4.4.4 rom that instal without problems. For now, the only two bug I mentioned are those ...
thank you
Quote:
What is NamelessROM ?
Simple - NamelessROM is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessROM is to provide quality development for android devices, phones and tablets alike.
NamelessROM developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessROM maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
Visit our website for more detailed information.
NamelessROM = endless possibilities. Unless you have an iPhone, then you're out of luck.
Click to expand...
Click to collapse
This is Nameless Lollipop rom for A210. This is in testing stage. Please do try it out. I am not responsible for any damage caused by this rom. Please don't complain about any bootloops or bricked devices and blame me. Those curious enough can try and please feel free to comment. cheers
P.S. The rom is probabaly not rooted. I don't want to include root package until this is atleast in beta stage. Those who want root can try flashing SuperSU at your own risk.
DISCLAIMER
Quote:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Download Links
Rom: 23/07/2015
Gapps: PA Gapps
Installation Instructions
Download zip to your sdcard
Make sure you're using a Kitkat Compatible Recovery
Boot into Recovery
Take a backup if required
Wipe all your data
Flash zip from sdcard
(Optional)Flash Google Apps.zip from sdcard
Reboot
PREVIOUS DOWNLOADS
19/07/2015 (Not Booting)
XDA:DevDB Information
Nameless Rom for Canvas 4 A210, ROM for the Micromax Canvas 4 A210
CREDITS
chrmhoffmann for RIL
fire855 for his work.
Contributors
sai24
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Kitkat compatible recovery
Based On: CM
Version Information
Status: Testing
Created 2015-07-19
Last Updated 2015-07-23
Question [?]
Hi !
I'm an MT6589 user with a phone with the exact specs than yours .
I've got 4.4.2 OFFICIAL ( Released by my brand, 0 Bugs ) and Jelly Bean ( Also official ) .
Also, i've got KK & JB Kernel sources .
¿ How Can I Port This ROM ?
Thanks !
Salutations from Spain !
Wowwwwwww!!! A Complete Lollipop Rom for our Canvas4. Never ever imagined of this. Thanks a lot Bro. Could you please mention the bugs in the rom, and if possible some screenshots. That would be awesome. We will definitely try and help this rom out. :good::good::good::good::good:
First thank you for you hard work. I want to test your rom but i can't because i am on wiko stairway (A210 clone's) and so the installation aborte. :crying:
Installation was successful in recovery, But its not rebooting. Got stuck at boot image, waited for 15 min but no result.
Anyone please upload kitkat recovery
ats0709 said:
Anyone please upload kitkat recovery
Click to expand...
Click to collapse
Head over to this link bro,
http://forum.xda-developers.com/canvas-4/development/recovery-clockworkmod-6-0-4-8-t2739053
Flash the rom and please report if its rebooting and working.
Hi Guys,
we have been checking the stairway roms mostly, for kitkat...
how to get the updater script working again for a210...
can u change the updater-script accordingly so that it works with the stairway roms.
baffled!!!!
Regards
Porting THis ROM
Hi another time !
I'm an MT6589 user with a phone with the exact specs than yours .
I've got 4.4.2 OFFICIAL ( Released by my brand, 0 Bugs ) and Jelly Bean ( Also official ) .
Also, i've got KK & JB Kernel sources .
¿ How Can I Port This ROM ?
In this GitHub ( Brand GitHub's ) is located the Kit Kat and the Jelly Bean kernel source :
https://github.com/bq/aquaris-5HD
And there are the complete phone specifications :
http://www.devicespecifications.com/en/model/445730ea
Do i need to mod anything on the kernel ?
If it helps, I have knowledge of C ++ and a little bit of MakeFile structure.
Also, I'm on a Linux OS ( Ubuntu 14.04.2 ) and i know a lot of terminal usages to build kernels & roms .
Thanks !
Salutations from Spain !
Well, did anyone tried the rom on canvas4, is it working.
Can the updater script changed in a way that it works with canvas4 with stairway roms installed before??
Can u post an updater script with the assertion removed...
i couldnt read with line breaks in the notepad
Please help
Holy cow, great work! I can't wait to test this one. I'll report back.
flashed this rom but not rebooting
flashed this rom but not rebooting
maazkazi91 said:
flashed this rom but not rebooting
Click to expand...
Click to collapse
Does it go to the boot animation screen or does a bootloop occur? Please try wiping data and factory reset after you flash the rom and try rebooting. Thanks for all those who tried the rom. Cheers!!
it reboots continiously
it boots continuously after flashing... but i haven't wiped cache after flashing the rom... will try that method and let u know
It does not go to the Boot Animation. Just keeps on rebooting to the boot logo. Did what you asked, no avail.
---------- Post added at 10:37 AM ---------- Previous post was at 10:29 AM ----------
@sai24 can you list the features that work and those that doesn't work? Thanks bro.
@sai24, did what you said bro. Did the data/factory reset and cleared cache, but still no good. Its continuously going back to the boot image. Please help us. Very excited to try this one. Thanks a lot bro.
kannanrs said:
Can the updater script changed in a way that it works with canvas4 with stairway roms installed before??
Can u post an updater script with the assertion removed...
i couldnt read with line breaks in the notepad
Please help
Click to expand...
Click to collapse
Download and use Notepad++
I've tried a kk rom but it failed with firmware and cost my touchscreen... so be careful guizz with this new rom...
amarnath_jamale said:
I've tried a kk rom but it failed with firmware and cost my touchscreen... so be careful guizz with this new rom...
Click to expand...
Click to collapse
I think there is no such kk rom in this entire thread. Anywaz, lets hope this rom works perfect as soon as possible with all the efforts of developers and members.
Hello XDA, I will present my work: Port of applications and mod that were tested and worked my current phone J5. This is not a compilation of apps it's my job for months so slowly I'll upload more files here.
PORT APPS / MOD for J5xxx (5.1.1 / 6.0.1) CM12.1
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
IMPORTANT
Or backup to backup both your applications or general system before proceeding.
All these files are in the post, were tested by me and work perfectly.
PORT APPS (5.1.1/6.0.1/CM12.1)
Keyboard Sony Z5 Premium Port(Updated)
Install apk and enjoy
Link: https://mega.nz/#!EIYRHBJA!9nGmsz-RuDf4DANwrs3A9_yPp0g4vHFOymJZQPwUqYs
Wallman Xperia Z5 Port(Updated)
Flash for recovery and enjoy
Link: https://mega.nz/#!AUZHGBxD!KoEzud0i3M0awbQbU8ejEYl-iT-2uNGcBKRybAYMCRQ
Sony Xperia video player Port(Updated)
Flash for recovery and enjoy
Link: https://mega.nz/#!AUZHGBxD!KoEzud0i3M0awbQbU8ejEYl-iT-2uNGcBKRybAYMCRQ
Facebook with integrated messenger V81
Delete data and uninstall (Facebook and messenger if used)
Install and enjoy this facebook
Link: https://https://mega.nz/#F!AJpWlYbI!9JLCrmTxR8GoMiBG6sZI1Q
Camera HTC M9 Port(Updated)
Flash for recovery and enjoy
Link: https://mega.nz/#!VdoVwIgS!MTNZHii-Tp2lbhGlU6SFm5Lx0RdzDa15qXI3BDeM7bo
ONLY CM12.1
Volume Up (Volume 88)
Flash for recovery and enjoy
Link: https://mega.nz/#!0VJ3HSDZ!ysK3dJ_eimruDNuteNoRm5URW8KpDUk1pHK5nxRvJGs
Optimize Wifi / Data 4G / 3G to the maximum
Flash for recovery and enjoy
Link: https://mega.nz/#!VMBwXAAR!NVibqyFL4BCKFvleLHppU5-NV0PXWQi3ejP3pP0IA5w
Android M 6.0.1 Bootanimation
Flash for recovery and enjoy
Link: https://mega.nz/#!cEYkWYLI!7F5BwsVTanq6nSHM_J8aTLLJq8mzk5yAJIR5odsY57A
Camera Motorola Port
Flash for recovery and enjoy
Link: https://mega.nz/#!tF5HFBRb!cLHhuQowMLfGepkAAWOfjNmfSkyJ2b4nOrdmFAnwwFc
Facebook with integrated messenger V92
Delete data and uninstall (Facebook and messenger if used)
Install and enjoy this facebook
Link: https://mega.nz/#!kEhlxB5I!N2LHAWS3KEZdPIiTuWiZ7aCLeAJHNqqiRN8H4SO1NFs
ONLY 6.0.1
GALERY GRACE UX
Flash for recovery and enjoy
Link: https://mega.nz/#!QI4xlDKb!rjfFSyIMj3WPGGKSUooPmZYwef2L5Y5uGxE9uSqDDII
CONTACTOS/INCALL UI GRACE UX
Flash for recovery and enjoy
Link: https://mega.nz/#!RZ5WkZyB!HeWsT0KaZbnRwggWXmRS4cYjHQvFQjawafQVxhAJEA8
MMS GRACE UX
Flash for recovery and enjoy
Link: https://mega.nz/#!4NRlkSpT!IWkNBrB0UulCNNMZzxp94MRM4faSzq7aBWtgUFg59Ts
ZVideo SAMSUNG
Flash for recovery and enjoy
Link: https://mega.nz/#!AIgAVKjZ!p-o-nx-hE5II-ryu_MnzpyJBzg3JoDP-9G723nPffJA
Volume Up (Volume 88)
Flash for recovery and enjoy
Link: https://mega.nz/#!1Zw0XSRT!t-hUm1kjWjSlBDp_FmJP5b12I6wYQs7-jWbM3lNQjrc
Pressing the THANKS button does give me some satisfaction/motivation :fingers-crossed:
CREDITS:
@samsung for Firmware
@Albe95 for apps ports Grace UX (6.0.1)
@sony for plataform
@lorantm for FBPatcher
It will go up and updating this post with more applications and Mod.
So be aware of what is coming soon
XDA:DevDB Information
PORT APPS / MOD for J5xxx , App for all devices (see above for details)
Contributors
By Zonik
Version Information
Status: Stable
Created 2016-08-21
Last Updated 2016-08-21
Reserved.
Hi @By Zonik i see that you patch fb v92 with @lorantm patch, is that fb can patch again ?
tavatien86 said:
Hi @By Zonik i see that you patch fb v92 with @lorantm patch, is that fb can patch again ?
Click to expand...
Click to collapse
Brings errors,I had to compile the app separate patch since it was not good. V85 if it works well the patch there is no need to do any modification
By Zonik said:
Brings errors,I had to compile the app separate patch since it was not good. V85 if it works well the patch there is no need to do any modification
Click to expand...
Click to collapse
Oh really nice, if you can work with him to keep "FB Patcher" that woulb be awesome
Can u plz make samsung contacts, samsung my files, samsung contacts apk for cm 12.1
I want to use them 4 samsung core prime with cm12.1
can u plz provide it as soon as possible
ashish1989 said:
Can u plz make samsung contacts, samsung my files, samsung contacts apk for cm 12.1
I want to use them 4 samsung core prime with cm12.1
can u plz provide it as soon as possible
Click to expand...
Click to collapse
Stock CM12.1 are different platforms and different developments.
You can not work TouchWiz application in a rom CyanogenMod.
You have to compile create zero for a different system
This HTC M9 Camera Port is an update of the new camera that came in rom perfomance boost speed 4.1?
I can install without problems?
Clebson Ferreira said:
This HTC M9 Camera Port is an update of the new camera that came in rom perfomance boost speed 4.1?
I can install without problems?
Click to expand...
Click to collapse
Port Camera htc 10 is only for 6.0.1 you must delete raiz camera and to test newly-port htc 9. Htc 10 is the update
Update Sony Xperia video player Port link please ^^
what this volume up ?
By Zonik said:
Port Camera htc 10 is only for 6.0.1 you must delete raiz camera and to test newly-port htc 9. Htc 10 is the update
Click to expand...
Click to collapse
camera htc10 doesnt work on 6.0.1 j500h ..
using your performance build
Cat167 said:
what this volume up ?
Click to expand...
Click to collapse
Speaker and handset volume.
Ace MoGor said:
camera htc10 doesnt work on 6.0.1 j500h ..
using your performance build
Click to expand...
Click to collapse
Although no link chamber 10 Port Htc must be 9.
Thank you for your report as may be uploading the port of Htc 10 Camera
By Zonik said:
Although no link chamber 10 Port Htc must be 9.
Thank you for your report as may be uploading the port of Htc 10 Camera
Click to expand...
Click to collapse
Oh yeah..my bad .. htc9 camera doesnt work on 6.0.1
Waiting for 10
hey.
sorry i'm asking something here, but there's a way to port the original samsung camera to cm 12/13? i miss the frontal flashlight when taking a selfie.
thanks!
CAn I FLASH THIS ROM IN MY SAMSUNG j500H?
CAn I FLASH THIS ROM IN MY SAMSUNG j500H?
RyamBudha said:
CAn I FLASH THIS ROM IN MY SAMSUNG j500H?
Click to expand...
Click to collapse
No rom in this thread. They are port of apps and mod. If you want to install any, just do it in the rom and corresponding version of android.
What is "volume up, volume 88"?
paulo boë said:
What is "volume up, volume 88"?
Click to expand...
Click to collapse
Volume up modifying the mixerpaths. (4Db + in headset and speaker)
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.1 Marshmallow, which is designed to increase performance and reliability over stock Android for your device.
Read This * Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Important Notice!Root is now disabled by default on CyanogenMod 13. To enable it go to Settings>Developer Options>Root access and set to Apps only or Apps and ADB.
Features
-Gesture wakes up
-Best Screen-On-Time of 4:15 hrs to 4:30 hrs among current roms with fp.
-Bluetooth (send and receive files, Bluetooth headset normal)
-Camera (camera, video, HDR normal)
-Call (then call the normal)
-SMS (send and receive normal)
-Infrared is normal
-Support fast charge
-Integrated flat theme
-No YouTube video freezes
-Smooth and fast.
-Working infrared ( pre installed letv remote app) and fingerprint.
-Decent battery backup.
-All the customisations.
-No 'Idle Phone' battery drain.
-Working Fingerprint sensor.(For now data needs to be restored from stock EUI).
DownloadsROM: https://drive.google.com/file/d/0B02Z9EXjik9aMDlrS21EVU9GalU/view?usp=drivesdk
GApps: http://opengapps.org/
TWRP(3.0.3): https://twrp.me/devices/letvle1s.html
Installation Instructions
1. TWRP 3.0.3 should be installed.
2. Fingerprint data backup form stock rom should be made via TWRP ( refer video tutorial attached in the end of the post.)
3. Reboot to recovery ( TWRP)
4. Wipe>Advanced wipe and select Data, Cache, System and Dalvik Cache and swipe to wipe.
5. Flash cm-13.0-20161203-UNOFFICIAL-X500.zip
6. Flash GApps.( ARM64, android 6, any package)
7. Restore the fingerprint data.
8. Wipe Caches.
9. Reboot.
Tip: Don't forget to calibrate your battery using Battery Calibration ROOT app from play store every time you flash a new ROM.
XDA : DevDB Information
CyanogenMod 13 ROM for Le 1S.
ROM OS Version: 6.0.x Marshmallow
Source: http://bbs.ydss.cn/forum.php?mod=viewthread&tid=719830&extra=page=4&filter=author&orderby=dateline
Contributors:
Bule.
Credits:
Bule(For making ROM), Shavi suri(For installation tutorial).
Is this built from source specifically for the Le 1S or is it just another modified pre-built ROM originally built for another device?
Also, a ROM built on the 3rd of December is pretty old, I'll have to look on some other sites to see if this is something that was announced elsewhere ages ago and not worth getting enthused about.
i request you to provide the sources.
Nameless One said:
Is this built from source specifically for the Le 1S or is it just another modified pre-built ROM originally built for another device?
Also, a ROM built on the 3rd of December is pretty old, I'll have to look on some other sites to see if this is something that was announced elsewhere ages ago and not worth getting enthused about.
Click to expand...
Click to collapse
Cm has already shut shop
Sent from my ONE E1003 using Tapatalk
reversegear said:
i request you to provide the sources.
Click to expand...
Click to collapse
Kernel : https://github.com/lbule/android_kernel_Letv_X500
Device tree : https://github.com/lbule/android_device_Letv_X500
Credit : Bule
---------- Post added at 09:04 AM ---------- Previous post was at 09:02 AM ----------
Nameless One said:
Is this built from source specifically for the Le 1S or is it just another modified pre-built ROM originally built for another device?.
Click to expand...
Click to collapse
Source compiled
Unable to flash this in my le 1s x507 5.8.19s . I tried twrp 2.8.7 and 3.0.3 both everytime show error "system have non-content after ota update".
Plzzz help
bring lineage os
love4chat said:
bring lineage os
Click to expand...
Click to collapse
Here,
https://forum.xda-developers.com/leeco-le-1s/development/rom-lineageos-13-x500-7-9-t3567752
reversegear said:
Here,
https://forum.xda-developers.com/leeco-le-1s/development/rom-lineageos-13-x500-7-9-t3567752
Click to expand...
Click to collapse
i meant the lastest one would be nicer ie 14.1
love4chat said:
i meant the lastest one would be nicer ie 14.1
Click to expand...
Click to collapse
Have patience buddy.. there are only few devs are working on our device..
already 14.1 is under development.
reversegear said:
Have patience buddy.. there are only few devs are working on our device..
already 14.1 is under development.
Click to expand...
Click to collapse
thats great news
reversegear said:
Here,
https://forum.xda-developers.com/leeco-le-1s/development/rom-lineageos-13-x500-7-9-t3567752
Click to expand...
Click to collapse
Hmm, with the ROM in the quoted link, under Bluetooth the default device name showed as "Redmi Note 2" which suggests to me that this isn't built from source for this device but is a modified ROM built for the Redmi Note 2 which is rather disappointing. I would like to think that the LineageOS 14.1 ROM is truly being built from source for the 1S but I don't believe it for a moment.
At least this ROM image isn't full of Chinese garbage.
Nameless One said:
Hmm, with the ROM in the quoted link, under Bluetooth the default device name showed as "Redmi Note 2" which suggests to me that this isn't built from source for this device but is a modified ROM built for the Redmi Note 2 which is rather disappointing. I would like to think that the LineageOS 14.1 ROM is truly being built from source for the 1S but I don't believe it for a moment.
At least this ROM image isn't full of Chinese garbage.
Click to expand...
Click to collapse
Yes. the op in that link has mentioned PORT in the title..
if you are interested testing LOS 14.1(Built from source) let me know via PM.
reversegear said:
Yes. the op in that link has mentioned PORT in the title..
if you are interested testing LOS 14.1(Built from source) let me know via PM.
Click to expand...
Click to collapse
I didn't see the title when following the link but now that you mentioned it the PORT in the title is clear.
If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Project OneOS based on CAF, to provide stability, smoothness and minimal features.
What's Working
Boots
RIL
NFC
Fingerprint
Camera
WIFI
Bluetooth, needs to be tested
Click to expand...
Click to collapse
Flash Instruction's
Have latest OOS 10.x flashed to both slots!!
Make sure to use PBRP
https://sourceforge.net/projects/project-oneos/files/hotdog/hotdog_1.img/download
Boot to recovery(PBRP)
Flash ROM.zip
Wipe Cache
Format Data
Reboot and Enjoy
Click to expand...
Click to collapse
Changelog
Code:
Initial Build
Downloads
https://sourceforge.net/projects/project-oneos/files/hotdog/
Support Group
https://t.me/ProjectOneOP7Series
Version Information
* Status : BETA-I
* ROM Version: 3.0
* For device: hotdog
* Android Version : 11
* Security patch level : November 2020
* Kernel Version : 4.14.117
* Kernel Source : https://github.com/Project-OneOS/android_kernel_oneplus_sm8150
* Contributors : Mohd Faraz, Ashley David, Govind1233
Welcome to OP7T Pro!!
Gapps included? If not, can they be flashed through PBRP?
Thanks in advance
FSadino said:
Welcome to OP7T Pro!!
Gapps included? If not, can they be flashed through PBRP?
Thanks in advance
Click to expand...
Click to collapse
Gapps are already included, also i would recommend to use gapps that comes with rom
Does OnePlus 7T Pro (hotdog) support PBRP?
I can only find links for OnePlus 7 Pro.
Thanks
chiiiiiiippppppp said:
Does OnePlus 7T Pro (hotdog) support PBRP?
I can only find links for OnePlus 7 Pro.
Thanks
Click to expand...
Click to collapse
Sir, check under Flashing Instructions there is an link to pbrp
Does android auto work with this rom?
cybrid3 said:
Does android auto work with this rom?
Click to expand...
Click to collapse
Not yet tested, i don't have car
Inderpreets said:
Not yet tested, i don't have car
Click to expand...
Click to collapse
Any screenshoots my Master?
EugenStanis said:
Any screenshoots my Master?
Click to expand...
Click to collapse
Yeah, we have it our telegram support group.
cybrid3 said:
Does android auto work with this rom?
Click to expand...
Click to collapse
Hey buddy, i get Android Auto tested with my tester. And its working fine
Inderpreets said:
Hey buddy, i get Android Auto tested with my tester. And its working fine
Click to expand...
Click to collapse
Ah superb. Thanks for the report
I am searching the net but can't find it. Is this Oneos based on miui?
Hi I followed instructions and installed. I'm experiencing random reboots and magisk not passing safetynet. I'm on OOS 10.0.13 had to revert back to my previous ROM. Will there be more customization features in future builds? Thanks
darkoj2007 said:
I am searching the net but can't find it. Is this Oneos based on miui?
Click to expand...
Click to collapse
Its my own rom, and check title its based on caf not MIUI
slapman said:
Hi I followed instructions and installed. I'm experiencing random reboots and magisk not passing safetynet. Reverted back to my previous ROM. Will there be more customization features in future builds? Thanks
Click to expand...
Click to collapse
Sir, thanks for making interest in the rom. And don't use magisk manager as i didn't tested rom with it, even after magisk uninstall rom reboots. Then join our support group we will definitely help you out
Inderpreets said:
Yeah, we have it our telegram support group.
Click to expand...
Click to collapse
Inderpreets said:
Sir, thanks for making interest in the rom. And don't use magisk manager as i didn't tested rom with it, even after magisk uninstall rom reboots. Then join our support group we will definitely help you out
Click to expand...
Click to collapse
I'd appreciate if support is provided in this thread and not only via Telegram. Please review the conditions, under which we grant developers the privilege to provide links to their social media.
Device Forum Rules (Please Read before Posting)
In this thread, we will provide a short Q&A for your stay on this forum. Please read thoroughly and act accordingly. While most that is needed to know is pointed out in the Forum Rules, history shows that some points of these rules are not...
forum.xda-developers.com
Thanks for your cooperation!
Stay safe and stay healthy!
Regards
Oswald Boelcke
Forum Moderator
where can I find PBRP for the 7T Pro?
Abaddon said:
where can I find PBRP for the 7T Pro?
Click to expand...
Click to collapse
Its mentioned in the flash instructions.
For those who want to flash OneOS:
flash OOS11 to both slots
download it https://download.project-oneos.org/hotdog/recovery.img
and then
fastboot flash recovery recovery.img
fastboot flash recovery_a recovery.img
fastboot flash recovery_b recovery.img
then reboot your phone(note: From my experience, this recovery can only support sideload, you cannot enter the recovery and get a graphical interface to wipe/install/others...)
adb reboot sideload
adb sideload <rom package zip>(note: must be the newest build (https://download.project-oneos.org/hotdog/OneOS-3.1-STABLE-GApps-20210410-0722-hotdog.zip) you can get the newest download link from the telegram group)
If the status is 0, you flash it successfully.
Finally, you click reboot system, it will ask you to format the data. Click yes to format, then reboot your phone.
Enjoy.