CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.1 Marshmallow, which is designed to increase performance and reliability over stock Android for your device.
Read This * Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Important Notice!Root is now disabled by default on CyanogenMod 13. To enable it go to Settings>Developer Options>Root access and set to Apps only or Apps and ADB.
Features
-Gesture wakes up
-Best Screen-On-Time of 4:15 hrs to 4:30 hrs among current roms with fp.
-Bluetooth (send and receive files, Bluetooth headset normal)
-Camera (camera, video, HDR normal)
-Call (then call the normal)
-SMS (send and receive normal)
-Infrared is normal
-Support fast charge
-Integrated flat theme
-No YouTube video freezes
-Smooth and fast.
-Working infrared ( pre installed letv remote app) and fingerprint.
-Decent battery backup.
-All the customisations.
-No 'Idle Phone' battery drain.
-Working Fingerprint sensor.(For now data needs to be restored from stock EUI).
DownloadsROM: https://drive.google.com/file/d/0B02Z9EXjik9aMDlrS21EVU9GalU/view?usp=drivesdk
GApps: http://opengapps.org/
TWRP(3.0.3): https://twrp.me/devices/letvle1s.html
Installation Instructions
1. TWRP 3.0.3 should be installed.
2. Fingerprint data backup form stock rom should be made via TWRP ( refer video tutorial attached in the end of the post.)
3. Reboot to recovery ( TWRP)
4. Wipe>Advanced wipe and select Data, Cache, System and Dalvik Cache and swipe to wipe.
5. Flash cm-13.0-20161203-UNOFFICIAL-X500.zip
6. Flash GApps.( ARM64, android 6, any package)
7. Restore the fingerprint data.
8. Wipe Caches.
9. Reboot.
Tip: Don't forget to calibrate your battery using Battery Calibration ROOT app from play store every time you flash a new ROM.
XDA : DevDB Information
CyanogenMod 13 ROM for Le 1S.
ROM OS Version: 6.0.x Marshmallow
Source: http://bbs.ydss.cn/forum.php?mod=viewthread&tid=719830&extra=page=4&filter=author&orderby=dateline
Contributors:
Bule.
Credits:
Bule(For making ROM), Shavi suri(For installation tutorial).
Is this built from source specifically for the Le 1S or is it just another modified pre-built ROM originally built for another device?
Also, a ROM built on the 3rd of December is pretty old, I'll have to look on some other sites to see if this is something that was announced elsewhere ages ago and not worth getting enthused about.
i request you to provide the sources.
Nameless One said:
Is this built from source specifically for the Le 1S or is it just another modified pre-built ROM originally built for another device?
Also, a ROM built on the 3rd of December is pretty old, I'll have to look on some other sites to see if this is something that was announced elsewhere ages ago and not worth getting enthused about.
Click to expand...
Click to collapse
Cm has already shut shop
Sent from my ONE E1003 using Tapatalk
reversegear said:
i request you to provide the sources.
Click to expand...
Click to collapse
Kernel : https://github.com/lbule/android_kernel_Letv_X500
Device tree : https://github.com/lbule/android_device_Letv_X500
Credit : Bule
---------- Post added at 09:04 AM ---------- Previous post was at 09:02 AM ----------
Nameless One said:
Is this built from source specifically for the Le 1S or is it just another modified pre-built ROM originally built for another device?.
Click to expand...
Click to collapse
Source compiled
Unable to flash this in my le 1s x507 5.8.19s . I tried twrp 2.8.7 and 3.0.3 both everytime show error "system have non-content after ota update".
Plzzz help
bring lineage os
love4chat said:
bring lineage os
Click to expand...
Click to collapse
Here,
https://forum.xda-developers.com/leeco-le-1s/development/rom-lineageos-13-x500-7-9-t3567752
reversegear said:
Here,
https://forum.xda-developers.com/leeco-le-1s/development/rom-lineageos-13-x500-7-9-t3567752
Click to expand...
Click to collapse
i meant the lastest one would be nicer ie 14.1
love4chat said:
i meant the lastest one would be nicer ie 14.1
Click to expand...
Click to collapse
Have patience buddy.. there are only few devs are working on our device..
already 14.1 is under development.
reversegear said:
Have patience buddy.. there are only few devs are working on our device..
already 14.1 is under development.
Click to expand...
Click to collapse
thats great news
reversegear said:
Here,
https://forum.xda-developers.com/leeco-le-1s/development/rom-lineageos-13-x500-7-9-t3567752
Click to expand...
Click to collapse
Hmm, with the ROM in the quoted link, under Bluetooth the default device name showed as "Redmi Note 2" which suggests to me that this isn't built from source for this device but is a modified ROM built for the Redmi Note 2 which is rather disappointing. I would like to think that the LineageOS 14.1 ROM is truly being built from source for the 1S but I don't believe it for a moment.
At least this ROM image isn't full of Chinese garbage.
Nameless One said:
Hmm, with the ROM in the quoted link, under Bluetooth the default device name showed as "Redmi Note 2" which suggests to me that this isn't built from source for this device but is a modified ROM built for the Redmi Note 2 which is rather disappointing. I would like to think that the LineageOS 14.1 ROM is truly being built from source for the 1S but I don't believe it for a moment.
At least this ROM image isn't full of Chinese garbage.
Click to expand...
Click to collapse
Yes. the op in that link has mentioned PORT in the title..
if you are interested testing LOS 14.1(Built from source) let me know via PM.
reversegear said:
Yes. the op in that link has mentioned PORT in the title..
if you are interested testing LOS 14.1(Built from source) let me know via PM.
Click to expand...
Click to collapse
I didn't see the title when following the link but now that you mentioned it the PORT in the title is clear.
If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will break it! :P
* Act accordingly
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Important information:
This thread is for CyanogenMod 11 opensource builds for the OnePlus One. The following will not be supported in this thread:
- Custom Kernels
- Mods
- Modified system files
- Xposed
- CyanogenMod 11S
For CyanogenMod 11S, the customized version specifically for the OnePlus One, please visit this thread: http://forum.xda-developers.com/oneplus-one/general/discussion-cyanogenmod-11s-t2840305
Instructions:
Comprehensive installation instructions for CM on the OnePlus One can be found on the CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/Install_CM_for_bacon
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
CyanogenMod:
Latest Snapshot: CyanogenMod 11 SNAPSHOT-M9 (4.4.4) - Download
Latest Nightly: Download
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
OnePlus One - CyanogenMod 11 OpenSource, ROM for the ONEPLUS ONE
Contributors
neatchee, cyanogenmod, ciwrl
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Snapshot
Created 2014-08-07
Last Updated 2014-08-06
Hmmm...
Nice. Does anyone have a gapps package that gives the "Google" experience and install the CM11S apps (i.e. CameraNext, AudioFX, Screencast)?
sbenson1226 said:
Nice. Does anyone have a gapps package that gives the "Google" experience and install the CM11S apps (i.e. CameraNext, AudioFX, Screencast)?
Click to expand...
Click to collapse
I'm a huge fan of these:
http://forum.xda-developers.com/showthread.php?t=2397942
hedsick said:
I'm a huge fan of these:
http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
I tried those and the camera didn't work. Did you have any issues with "can't connect to camera?"
sbenson1226 said:
I tried those and the camera didn't work. Did you have any issues with "can't connect to camera?"
Click to expand...
Click to collapse
Nope - works great for me.
sbenson1226 said:
I tried those and the camera didn't work. Did you have any issues with "can't connect to camera?"
Click to expand...
Click to collapse
Depending what gapps you use it can give you problems Connecting to the Camera, I've noticed this in various gapps.
There is a thread where you can download the original OPO Camera app. You that one
Which gapps package in particular are you using? When I had my Nexus 5, I always used the Google Stock Package, but that one doesn't work on the One (or at least it didn't when I tried it).
sbenson1226 said:
Which gapps package in particular are you using? When I had my Nexus 5, I always used the Google Stock Package, but that one doesn't work on the One (or at least it didn't when I tried it).
Click to expand...
Click to collapse
I'm using the Full Modular off the above link.
hedsick said:
I'm using the Full Modular off the above link.
Click to expand...
Click to collapse
That seems to be the reason. The stock package probably doesn't have the libs required to make the camera work.
I wish I knew how to modify the gapps packages to include what I want. It looks like Greek to me.
Anyway, I'll just install the Full Modular and go from there. Thanks.
sbenson1226 said:
I tried those and the camera didn't work. Did you have any issues with "can't connect to camera?"
Click to expand...
Click to collapse
You can install stock package, but you have to follow the point 1 on this http://forum.xda-developers.com/showthread.php?p=44417558
nightlies broke it seems
For those of you having camera issues, go to /system/addons.d and remove the Google Camera script. Reflash your ROM. This gets rid of those pesky libraries added from the PA Gapps for the camera.
You're free to install Google Camera now from the Play store. Its those libs that break everything, so you have to remove that script.
---------- Post added at 06:42 PM ---------- Previous post was at 06:41 PM ----------
sbenson1226 said:
That seems to be the reason. The stock package probably doesn't have the libs required to make the camera work.
I wish I knew how to modify the gapps packages to include what I want. It looks like Greek to me.
Anyway, I'll just install the Full Modular and go from there. Thanks.
Click to expand...
Click to collapse
Its more like Stock adds some libs that mess up the camera. The camera works fine if you install from the Play Store, but if you flash it from PA Gapps, those libs break things.
Personally, I use Full Modular + install camera from play store.
Can you dirty flash over CM11S?
y2k1ltd said:
Can you dirty flash over CM11S?
Click to expand...
Click to collapse
I don't think so. Clean wipe would be the best way to to.
Whenever I record with the built in screencast app from CM11S upon switching to landscape mode the video dimensions shrink like crazy. Does anyone else experience this or know of a way to change starting orientation when using screencast? I don't really want to use the paid screen recorder app from the app store that uses root permissions to achieve the same thing screencast does.
Edit: I had to make nova launcher landscape mode before recording.
Latest Nightly 08.08 immediately reboots everytime I start my phone.
I'm using the snapshot m9 I flashed lock screen and screencast from the themes and apps section and just installed the camera next app normally. I'm having the best battery life and the most stable experience I've had on this phone yet.
linzinator said:
Latest Nightly 08.08 immediately reboots everytime I start my phone.
Click to expand...
Click to collapse
try clean flashing. should be able to fix your problem.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Install instructions:
Reboot into recovery (latest TWRP recommended).
Wipe Data, System and Cache if it's a fresh install.
No wipes required if you're updating from a previous version of CM 13.0 (Wipe Cache and Dalvik Cache recommended).
Flash ROM + Gapps.
Reboot.
Read post 2 before reporting bugs.
Changelogs.
BUILD - 20161127
*make incall volume higher
*reduce min cpu
*audio fx still not fix
* asus pixel cam still not fix
*BFQ as default sched
*add core control
BUILD - 20161129
*New Kernel
*Fixed DT2W And OffScreen Gestures
BUILD - 20161201
*Kernel Updates
*Fixed Pixel Master Camera
*Fixed AudioFX
BUILD - 20161201
*Upstream Changes.
BUILD - 20161201
*Upstream Changes.
*Kernel Compiled With UBERTC.
BUILD - 20161201
*Upstream Changes And Device Related Changes.
Download links
Rom - https://www.androidfilehost.com/?fid=673368273298918967
Gapps - opengapps.org
Note - This isn't my work main developer of this project is audahadi so leave a like and support.
DONATION NOT NECESSARY BUT IT'LL HELP TO PAY SERVER BILLS.
Donate via PayPal - [email protected]
Credits
audahadi
luk1337
luca020400
Source
Device Tree - https://github.com/audahadi/android_device_asus_Z010D.git
Common - https://github.com/audahadi/android_device_asus_qcom_common.git
Vendor - https://github.com/audahadi/android_vendor_asus_Z010D.git
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Asus ZenFone 2
Contributors
ShadowReaper1, audahadi, luk1337, luca020400
Source Code: https://github.com/kernel-hut/android_kernel_asus_Z010D.git
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Marshmallow Bootloader/Modem
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-11-24
Last Updated 2016-12-26
Reserved
SOME RULES
PLEASE USE GIVEN SECTIONS ABOVE TO SORT EVERYTHING YOU HAVE IN YOUR MIND FOR EXAMPLE IF YOU WANT TO REPORT A BUG USE BUG REPORT SECTION ANY BUG REPORTS GIVEN IN THE COMMENT SECTIONS WILL BE IGNORED SAME GOES FOR EVERYTHING.
First Read The OP And Use The Search Box To Find Your Issue There's A Chance That Somebody Already Might Have Faced The Same Issue Before And Fixed It.
Bug reports:
Explain how to reproduce the bug and attach logcat and dmesg (if you had a random reboot, also attach last_kmsg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs:
LED Light May Not Work Properly Sometime.
Off charge doesn't work if your battery dies(switch off when goes to 0%) use recovery mode or fastboot mode to charge your phone for 15-20mins then power it on.
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How can I set '3G only' network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) Why there's a small delay when I wake up the phone?
A) Go to Settings > Display & lights and disable prevent accidental wake-up.
Q) Why is wifi always on in battery stats, even when it was disabled?
A) Go to Settings > Location, press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.
Reserved
Marshmallow Bootloader/Modem
If you are using stock lollipop rom then you must flash any stock marshmallow rom before upgrading to CyanogenMod else it won't boot.
it said the some 3rd camera apps may not work but other do right? and is the usb otg is ???? still working ???
How's the vpn on this rom?
phericaaaa said:
it said the some 3rd camera apps may not work but other do right? and is the usb otg is ???? still working ???
Click to expand...
Click to collapse
Yes Usb Otg Is Working.
sLipamin said:
How's the vpn on this rom?
Click to expand...
Click to collapse
We didn't test any vpn but you can try and revert back here.
Is it working at Zenfone Max with Snapdragon 410?
hitman128 said:
Is it working at Zenfone Max with Snapdragon 410?
Click to expand...
Click to collapse
Yes, it is for Zenfone Max SD 410
ShadowReaper1 said:
We didn't test any vpn but you can try and revert back here.
Click to expand...
Click to collapse
password file fix, pls
This is going to be awesome... so much thank you for the developer for this. do you guys have website so we can help you out by clicking ads... donate will do as well for keeping this on going project
ShadowReaper1 said:
We didn't test any vpn but you can try and revert back here.
Click to expand...
Click to collapse
how about app2sd and init.d support?
Nice job. But, This should be in the development forum. Not the general one.
Sent from my Zenfone 2 using Tapatalk
hi I can't seem to update it with my 5.0.2 ... i searched somewhere it needs a prerequisite wihich si a MM build before flashing to CM 13 MM
khiya said:
hi I can't seem to update it with my 5.0.2 ... i searched somewhere it needs a prerequisite wihich si a MM build before flashing to CM 13 MM
Click to expand...
Click to collapse
M bootloader is a mandatory
Sent from my Z010D using Tapatalk
pls help me
link download have been died pls help me
hatdua93 said:
password file fix, pls
Click to expand...
Click to collapse
No need password idk what are you talking about
kenbo111 said:
Nice job. But, This should be in the development forum. Not the general one.
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
Since Zenfone Max Has No Development Forum And It's A Phone From Zenfone 2 Series That's Why We Are Created This Thread In General Forum I Think It Would Be Wrong And Confusing If We Start Posting In Development Forum.
audahadi said:
M bootloader is a mandatory
Sent from my Z010D using Tapatalk
Click to expand...
Click to collapse
thanks... finally working using bootloader from 6.0.1 BETA
khiya said:
This is going to be awesome... so much thank you for the developer for this. do you guys have website so we can help you out by clicking ads... donate will do as well for keeping this on going project
Click to expand...
Click to collapse
Thanks but no thanks if you want you can leave a like
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for v1a3g (SM-P901). The following will not be supported here:
* Custom kernels
* Mods
* Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
* Flashed a custom kernel
* Installed or did mods from untrusted sources
* Modified system files
NOTICE:
This ROM may still have some bugs (although minor). Most things work except:
mic
Ok Google
S-Pen works with S-Pen apps (paint, notes, etc.). No popup will appear on removal.
If you find other issues (CM13 issues) please post them. May take a while to fix but they will be worked on.
ALSO - please DO NOT ask about CM14 - it is being looked into - no other info available.
Installation
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog&hl=en
Downloads
12/11 build
Google Drive: SM-P901-CM13
Mega Drive: SM-P901-CM13
One Drive: SM-P901-CM13
Old Downloads
Changelog:
12/11
Initial Release
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree: https://github.com/exynos5420/android_device_samsung_ha3g
Credits:
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@tincho5588(For testing my builds on device)
Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart)
This rom requires the Marshmallow boot loader.
gcrutchr said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial CyanogenMod 13.0 builds for v1a3g (SM-P901). The following will not be supported here:
* Custom kernels
* Mods
* Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
* Flashed a custom kernel
* Installed or did mods from untrusted sources
* Modified system files
NOTICE:
This ROM may still have some bugs (although minor). Most things work except:
mic
Ok Google
S-Pen works with S-Pen apps (paint, notes, etc.). No popup will appear on removal.
If you find other issues (CM13 issues) please post them. May take a while to fix but they will be worked on.
ALSO - please DO NOT ask about CM14 - it is being looked into - no other info available.
Installation
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog&hl=en
Downloads
12/11 build
Google Drive: SM-P901-CM13
Mega Drive: SM-P901-CM13
One Drive: SM-P901-CM13
Old Downloads
Changelog:
12/11
Initial Release
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree: https://github.com/exynos5420/android_device_samsung_ha3g
Credits:
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@tincho5588(For testing my builds on device)
Exynos5420 Dev Team (@deadman96385 @[email protected]@[email protected]@[email protected]@thermskin, @javelinanddart)
Click to expand...
Click to collapse
After one day , I found some bugs.
This cm ROM doesn't detect current battery status correctly. I plugged my charger to sm-p901 , unfortunately after 12 hours the battery status represents "50 %".
Second bug is WiFi . I have to select a bandwidth from 1 to 13 manually to connecting into my home wireless router.
Hope you fix this. Thank u so much
mohsenfa01 said:
After one day , I found some bugs.
This cm ROM doesn't detect current battery status correctly. I plugged my charger to sm-p901 , unfortunately after 12 hours the battery status represents "50 %".
Second bug is WiFi . I have to select a bandwidth from 1 to 13 manually to connecting into my home wireless router.
Hope you fix this. Thank u so much
Click to expand...
Click to collapse
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
gcrutchr said:
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
Click to expand...
Click to collapse
There is serious problem with battery, therefore there are so many apps which claim to calibrate battery, which one do you suggest to use?
mohsenfa01 said:
There is serious problem with battery, therefore there are so many apps which claim to calibrate battery, which one do you suggest to use?
Click to expand...
Click to collapse
Never used a battery calibration app - usually wait for green light to come on so I know battery full.
I suggest do a google search for cynogenmod and battery charging issue.
gcrutchr said:
Never used a battery calibration app - usually wait for green light to come on so I know battery full.
I suggest do a google search for cynogenmod and battery charging issue.
Click to expand...
Click to collapse
OK , how about s pen smart text selection?
mohsenfa01 said:
OK , how about s pen smart text selection?
Click to expand...
Click to collapse
If you are looking for the s-pen to work for everything like a Samsung rom, it won't.
As I stated in post #1, the s-pen works with apps that support it.
gcrutchr said:
If you are looking for the s-pen to work for everything like a Samsung rom, it won't.
As I stated in post #1, the s-pen works with apps that support it.
Click to expand...
Click to collapse
Ok, this rom have issue to connecting into wireless routsr with auto band
gcrutchr said:
Battery level has always been a issue with cyanogen mod (your battery is charging, though) - at least on all the ones I have tried. Do a google search for battery calibration.
Wifi - did you do a data wipe (try that) - also make sure your router is set to auto for band; and finally, in wifi settings, select forget network and try to reconnect.
Click to expand...
Click to collapse
I found there is serious WiFi channel issue in all marshmallow devices, just google these words:
Marshmallow WiFi channel
It seams this android version has disability to find WiFi units with channel 13 or 1. What's your opinion ?
mohsenfa01 said:
I found there is serious WiFi channel issue in all marshmallow devices, just google these words:
Marshmallow WiFi channel
It seams this android version has disability to find WiFi units with channel 13 or 1. What's your opinion ?
Click to expand...
Click to collapse
My wifi router (Thailand) has channels 1-13. I have no problem connecting with this rom or any other, including my Galaxy S3 which is on CM, my iPad Pro, my Note 5 and my Note Pro 12.2 (3g).
Did you clear the data before installing rom? Did you clear cache and dalvik cache?
Try downloading WIFI Analyzer on Play Store....maybe it will help.
Modem?
The sm-p901 has LTE, is this rom has it???? or I need to install custom
timmyhoa34 said:
The sm-p901 has LTE, is this rom has it???? or I need to install custom
Click to expand...
Click to collapse
This device should only have 3G.
timmyhoa34 said:
The sm-p901 has LTE, is this rom has it???? or I need to install custom
Click to expand...
Click to collapse
The SM-P901 does not have LTE. It is a 3G device.
There is nothing you can install to get LTE. LTE is part of the modem and the only Note Pro 12.2 device that has it is the P905 series.
Excellent
Thanks for this beautiful 6.0.1 ROM....great boost from stock 5.0.2 which was sluggish...very fast and stable...no issues to complain up to now...really appreciate you guys!!!
MyoMinhtoo said:
Thanks for this beautiful 6.0.1 ROM....great boost from stock 5.0.2 which was sluggish...very fast and stable...no issues to complain up to now...really appreciate you guys!!!
Click to expand...
Click to collapse
You're welcome!
Is it possible to switch from android to another one ? Like Ubuntu or windows 10 ?
mohsenfa01 said:
Is it possible to switch from android to another one ? Like Ubuntu or windows 10 ?
Click to expand...
Click to collapse
Windows 10? No
Linux? I have read about people running linux on an android tablet. Search XDA for the thread. It's under Android Software Development or Android Software and Hacking General.
Thank you.
How can i compile from source code?
e-sh said:
Thank you.
How can i compile from source code?
Click to expand...
Click to collapse
In the 1st post there are links to the source code. You need to set up your computer 1st to build android.
Then you can get the base android source from github and the v1a3g source code from the link in post #1.
SUPPORT FOR THIS HAS BEEN DISCONTINUED
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Unlock Bootloader!
Download the zip(s).
Install Appropriate FW base (STOCK MM 4.21.40.xx base is required) simple FW update package is available at my download link
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash LineageOS.
Optional: Install the Google Apps addon package. Open Gapps x86 7.1
Optional: Install the addon SU zip (x86 version)
Broken Features / Known Issues
VIDEO ENCODER/DECODER ISSUES: This results in green lines on videos/pictures taken using the Intel HW encoder/decoder and other playback issues dependent on video formats. See the list below:
[*] Snapchat: thin greeen line tends to appear on recorded videos for snapchat
Asus Pixelmaster Camera App: Super resolution mode does not work. Turning off "Optimizations" from settings clears up any green line issues.
Some video formats do not play as expected
FM Radio is unsupported.
sim 2 cannot be disabled (this is true for all CM builds on non qualcomm hardware)
Other than Fugu (Nexus Player TV box) there are no Vendor released M x86/x86_64 builds in existance. You may experience some issues with GAPPS and some known apps not loading or working correctly. Below is a list of KNOWN apps that do not currently run on CM13 based x86 Zenfone 2 builds :
Polaris Office, Chase Mobile, Showbox...
[*] Screen recording not working Works now.
Chromecast screen mirroring not working, native casting works though.
[*] factory reset from setting menu has been reported to cause recovery boot loops. Works now.
CM14 (not device specific issues)
No CMTE yet
CM file manager has trouble accessing external sdcard
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
As the Zenfone2 has multiple models from multiple countries please include the following information in your report:
model #
CPU Speed / RAM Size
device state when errors occur (BT/wifi/nfc on ? On a call ? sitting idle on shelf ? )
method to reproduce if you've found something consistent
Download Links
DOWNLOADS.LINEAGEOS.ORG
Recovery Links
Z00A
MM BL compatible TWRP: TWRP
Z008
MM BL compatible TWRP: TWRP
Google apps addon:
Recommend GAPPS for now as the updated x86 gapps.
SU addon:
Flashable SU addon/removal
FOR INFO ON MM BOOTLOADER BASED BUILDS SEE THIS POST
XDA:DevDB Information
LineageOS 14.1 Nightly Bulids (Z00A/Z008), ROM for the Asus ZenFone 2
Contributors
jrior001, crpalmer, say99
Source Code: https://github.com/LineageOS/android_kernel_asus_moorefield
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 4.21.40.xxx stock base
Version Information
Status: Nightly
Beta Release Date: 2016-11-09
Created 2017-01-27
Last Updated 2018-01-28
Reserved
DATA MIGRATION BUILDS
"THESE BUILDS WILL TAKE A LONG TIME (~30 mins) TO BOOT"
LineageOS has moved to private key signed builds. This is something that typically requires a full data wipe to transition too. To ease this burden for users who are not accustomed to that , the initial release builds are designed "MIGRATION" to help users who do not want to clean flash from an existing CM/Lineage build. Use the data migration builds as a one time "Flash this first, and then the officials" to migrate to private key signed builds. Follow the below instructions using the admiration builds to preserve app data if so desired, Otherwise feel free to clean flash directly to the weekly release builds
Official CM-13.0 -> CM14.1 Upgrade Guide
As seen with my previous unofficial CM-13.0 builds based on the MM Stock roms, An upgrade to the MM Firmware and bootloader is required going forward.
This guide is here to assist.
1) Download ROM and 7.1 GAPPS
2) Download my Firmware Update package for Z00A or Z008 . FASTBOOT AND ADB ARE REQUIRED!
3) Follow the included instructions to update Firmware and flash the new compatible TWRP. If for some reason the new TWRP is not flashed automatically flash it manually via fastboot. "fastboot flash recovery recoverimagename.img
4) Reboot to recovery and flash CM 14 and Gapps, reboot and enjoy. Data Wipe on upgrade is not required
CM 14.1 from Stock MM
1) Unlock Bootloader
2) Flash compatible TWRP
3) Perform desired backups
4) From recovery, factory reset & install ROM & 7.1 GAPPS
5) Enjoy!
CM 14.1 from CM13 Mm based beta builds
1) Reboot to TWRP( should already have good version)
2) Flash CM14.1 and 7.1 GAPPS
3) Reboot and enjoy!!
Reserve !
---------- Post added at 09:28 AM ---------- Previous post was at 09:14 AM ----------
I've just want to verify
to flash lineageOs
Its required Mm bootloader.
Is it required to flash also the firmware of Mm or just the bootloader and twrp !
Flashed migration build just fine. Didn't take too long. Flashing nightly now!
Thanks for big work. We love this rom, LinOS ???
Finally here!!!! Great job guys I'm glad you didn't give up through everything <3
jrior001 said:
Broken Features / Known Issues
VIDEO ENCODER/DECODER ISSUES: This results in green lines on videos/pictures taken using the Intel HW encoder/decoder and other playback issues dependent on video formats. See the list below:
Snapchat: thin greeen line tends to appear on recorded videos for snapchat
Asus Pixelmaster Camera App: Super resolution mode does not work. Turning off "Optimizations" from settings clears up any green line issues.
Some video formats do not play as expected
FM Radio is unsupported.
audio is a little weird in Real Racing 3.
sim 2 cannot be disabled (this is true for all CM builds on non qualcomm hardware)
Other than Fugu (Nexus Player TV box) there are no Vendor released M x86/x86_64 builds in existance. You may experience some issues with GAPPS and some known apps not loading or working correctly. Below is a list of KNOWN apps that do not currently run on CM13 based x86 Zenfone 2 builds :
Polaris Office, Chase Mobile, Showbox...
DRM content is currently broken
Live Display (color calibration) not working yet
Screen recording not working
Chromecast screen mirroring not working, native casting works though.
factory reset from setting menu has been reported to cause recovery boot loops.
Battery life is horrible, numerous display wakelock issues
CM14 (not device specific issues)
No CMTE yet
Status bar icon changing broken
CM file manager has trouble accessing external sdcard
Battery profile is non functional/string errors
Click to expand...
Click to collapse
Damn that's a lot of issues! Is this from the Lineage OS official build or from the unofficial ? Some of them issues must have had been fixed, right ?
beibyboy06 said:
Reserve !
---------- Post added at 09:28 AM ---------- Previous post was at 09:14 AM ----------
I've just want to verify
to flash lineageOs
Its required Mm bootloader.
Is it required to flash also the firmware of Mm or just the bootloader and twrp !
Click to expand...
Click to collapse
no... just upgrade your bootloader to MM, download and flash
---------- Post added at 03:15 AM ---------- Previous post was at 03:12 AM ----------
PedroCaseiro said:
Damn that's a lot of issues! Is this from the Lineage OS official build or from the unofficial ? Some of them issues must have had been fixed, right ?
Click to expand...
Click to collapse
give them time bro.... First nightly is up just now... chill
Why the zip on the lineageOS download page are not signed ? I need to disable the verification to install it in TWRP...
PedroCaseiro said:
Damn that's a lot of issues! Is this from the Lineage OS official build or from the unofficial ? Some of them issues must have had been fixed, right ?
Click to expand...
Click to collapse
Provably a few of those I can clean up, was just quick copy/pasta from the other thread
Sent from my ASUS_Z008 using Tapatalk
persieghini said:
no... just upgrade your bootloader to MM, download and flash
---------- Post added at 03:15 AM ---------- Previous post was at 03:12 AM ----------
give them time bro.... First nightly is up just now... chill
Click to expand...
Click to collapse
Ok btw can I upgrade my lollipop bootloader to MM via twrp
And also should I unroot and uninstall xposed?
cedric1997 said:
Why the zip on the lineageOS download page are not signed ? I need to disable the verification to install it in TWRP...
Click to expand...
Click to collapse
The builds are signed, its your twrp that's not signed with the same private key(and never will be) that keeps you from using that sig verification.
Sent from my ASUS_Z008 using Tapatalk
jrior001 said:
Provably a few of those I can clean up, was just quick copy/pasta from the other thread
Sent from my ASUS_Z008 using Tapatalk
Click to expand...
Click to collapse
Is the battery life really horrible? Is it worse than the MM blobs CM 13? Anyways, thanks for continuing to develop this great ROM.
How can I enable also G-Assistant and G-Now on LinOS
crisvincent said:
Is the battery life really horrible? Is it worse than the MM blobs CM 13? Anyways, thanks for continuing to develop this great ROM.
Click to expand...
Click to collapse
No, it's actually been much better recently. I cleaned up a couple of the issues that were causing inconsistent wakelock issues a week or so ago.
Sent from my ASUS_Z008 using Tapatalk
jrior001 said:
No, it's actually been much better recently. I cleaned up a couple of the issues that were causing inconsistent wakelock issues a week or so ago.
Sent from my ASUS_Z008 using Tapatalk
Click to expand...
Click to collapse
Can confirm, I noticed my battery get much better recently before realizing you had updated that. I still have an issue with losing fast/quick charge, but I haven't seen others mention this so it's likely an issue on my end.
New nightly rom is amazing.... Thanks a lot guys @jrior001
---------- Post added at 04:11 AM ---------- Previous post was at 04:07 AM ----------
beibyboy06 said:
Ok btw can I upgrade my lollipop bootloader to MM via twrp
And also should I unroot and uninstall xposed?
Click to expand...
Click to collapse
No you can't do it with twrp... You need adb(comp) and unrooting is not necessary... Uninstalling xposed is also not necessary... It won't work in nougat.. It'll just be there
Can i use SuperSU instead of the official root?
Wow , I know I've just done a clean install of the nightly ....but , is it just me or is this a lot faster , more fluent browsing the web pages than anything built in the past ? Or am I slightly delirious thru watching all that blue building up coff ?
Hats off to the new age lineage and the master dev
Just moved to the official branch. Migration tool worked perfectly, and SU optional package did its job as well.
The whole process was absolutely painless, so let's enjoy OTA updates from now on!
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on bacon
Official Download link:
LineageOS Downloads
Recommended Google Apps package:
Open GApps (Nano/pico are the only ones that fits)
Changelog:
Changes for bacon
Bug reports:
How to submit a bug report
LineageOS JIRA
Donate to support development:
Donate via PayPal to jrior001
Donate via PayPal to LineageOS
XDA:DevDB Information
LineageOS, ROM for the OnePlus One
Contributors
jrior001, npjohnson, mikeioannina
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2019-03-01
Last Updated 2019-03-01
Let's try it out....bacon pie...
jrior001 said:
Already on my list to look into. Its been working in bring up testing so should be easy fix.
Click to expand...
Click to collapse
Thanks for the great work you (and others of course) have done for getting bacon to remain a supported device by LineageOS :good:
Regarding LED notificattion issue, it seems that in some unofficial builds have already found the solution thanks to @dar2q
dar2q said:
if you use the commit from hxxps://review.lineageos.org/c/LineageOS/android_device_oppo_msm8939-common/+/234947 even though it is for another model, the LED starts working with SELinux still set to enforcing (sorry but i cant post links yet)
Click to expand...
Click to collapse
dar2q said:
@KiD3991 and @Tomoms for the LEDs to fully work (aka pulsing) you need to allow it in the sepolicy/file_contexts file:
Code:
/sys/devices/[a-z0-9]+\.i2c/i2c-[0-9]/[0-9]-[a-z0-9]+/grpfreq u:1object_r:sysfs_leds:s0
/sys/devices/[a-z0-9]+\.i2c/i2c-[0-9]/[0-9]-[a-z0-9]+/grppwm u:1object_r:sysfs_leds:s0
remove 1 at u:1object
Click to expand...
Click to collapse
I really don't know if it will be related to, but I tell you it just in case it can be useful.
drezz2 said:
What exactly does "Issue with play store and our device fingerprint" consist of what I can or can not do? that is, the store works but it is possible that it will not let me install any app?
Click to expand...
Click to collapse
It means that Play Store provides us with obsolete versions of some applications (such as Instagram or Facebook). The simplest solution is to download them from sites like apkmirror, that's all.
I have a problem with adb sideload. I made Format Data and when I try to flash Pie by adb sideload on TWRP says "you need adb 1.0.34 or newer". How can I proceed?
Enviado desde mi MI 8 mediante Tapatalk
Someone have issue with camera? Freeze...
Because of the new thread devoted to lineageos 16 I will repeat the description of issues with the first LOS16 relase:
- NFC is not working (GPay), phone can receive NFS tags but cannot send it,
- camera app crashes, it has no permission to device camera,
- led notificatiins are not working.
Upgrade according to LOS developers recommendations: from last LOS15.1 flash in trwp, ROM and gapps pico.
Hardware Buttons
Hi, not sure if you're aware of this already but hardware buttons don't seem to turn off after nav bar is toggled. Can anyone else confirm this? I've dirty flashed over 15 so maybe that's why but I'm not sure. By the way, thanks for supporting our device even longer. Props to the lineage team! :good:
Just wanted to ask if SELinux is enforcing or permissive on this build? Thanks once more![/QUOTE]
miaoruicong31431614 said:
Just wanted to ask if SELinux is enforcing or permissive on this build? Thanks once more!
Click to expand...
Click to collapse
Official builds always enforce SELinux.
Taurus_XDA said:
Thanks for the great work you (and others of course) have done for getting bacon to remain a supported device by LineageOS :good:
Regarding LED notificattion issue, it seems that in some unofficial builds have already found the solution thanks to @dar2q
I really don't know if it will be related to, but I tell you it just in case it can be useful.
It means that Play Store provides us with obsolete versions of some applications (such as Instagram or Facebook). The simplest solution is to download them from sites like apkmirror, that's all.
Click to expand...
Click to collapse
thanks
the problem maybe detecting in what applications that happens, maybe you are not aware of it
Is it possible that this is the cause of this too?
https://www.reddit.com/r/Android/comments/a19cl3/google_play_silently_updating_some_apps_even_when/
(Maybe it has nothing to do ... but I've noticed)
maybe I should wait a bit longer to install the rom being the main mobile.
I hope that the first battery data (drainage) .. is provided by the people who have it installed:silly:
Good
drezz2 said:
thanks
the problem maybe detecting in what applications that happens, maybe you are not aware of it
Is it possible that this is the cause of this too?
https://www.reddit.com/r/Android/comments/a19cl3/google_play_silently_updating_some_apps_even_when/
(Maybe it has nothing to do ... but I've noticed)
maybe I should wait a bit longer to install the rom being the main mobile.
I hope that the first battery data (drainage) .. is provided by the people who have it installed:silly:
Click to expand...
Click to collapse
Yes, you have to detect which applications aren't updated and solve it by yourself.
The link you are reffering I don't think is related. The problem here is the device fingerprint (or certification) that is too old (from the last CyanogenOS build from 2016).
vitafer1 said:
I have a problem with adb sideload. I made Format Data and when I try to flash Pie by adb sideload on TWRP says "you need adb 1.0.34 or newer". How can I proceed?
Enviado desde mi MI 8 mediante Tapatalk
Click to expand...
Click to collapse
What about getting a current adb? Mine is 1.0.40 (and i guess not really current, binary is from Mai 2018).
Your device tells you :"use adb 1.0.34 or never" ... what is unclear with this?
Cheers
Kurt
P.S.: ... next to come will be the question : "but where can i get it" ... i did the googling for you : Android Platform-Tools
Taurus_XDA said:
Yes, you have to detect which applications aren't updated and solve it by yourself.
The link you are reffering I don't think is related. The problem here is the device fingerprint (or certification) that is too old (from the last CyanogenOS build from 2016).
Click to expand...
Click to collapse
Thank you again
I imagined that it had no relationship, and this I have begun to notice not long ago .. but I do not know ... it will be a mistake in the store .. I hope it is not something with intention
krzysn said:
Because of the new thread devoted to lineageos 16 I will repeat the description of issues with the first LOS16 relase:
- NFC is not working (GPay), phone can receive NFS tags but cannot send it,
- camera app crashes, it has no permission to device camera,
- led notificatiins are not working.
Upgrade according to LOS developers recommendations: from last LOS15.1 flash in trwp, ROM and gapps pico.
Click to expand...
Click to collapse
Camera is not a issue at all
It does not crash it opens fine and records video and takes pictures with no problem
I am running the latest los nightly you can look at my screenshot
Please recommend best firmware baseband zip for LOS 16 for oneplus one thanks in advance...
I hope this marks the beginning for LOS based roms
saurabh.pin2 said:
Please recommend best firmware baseband zip for LOS 16 for oneplus one thanks in advance...
Click to expand...
Click to collapse
There is no "best" firmware, it all depends on you and where you live. For most of the people best is c6-00241
P.S for me camera works fine and yeah LED doesn't work, but it doesn't bother me
LTMendarynas7 said:
P.S for me camera works fine and yeah LED doesn't work, but it doesn't bother me
Click to expand...
Click to collapse
Are you have wiped any partition before upgrade?
---------- Post added at 08:42 AM ---------- Previous post was at 08:16 AM ----------
A few minutes ago I have flashed my phone again with wiped system partition. Still problems with camera and NFC
krzysn said:
Are you have wiped any partition before upgrade?
---------- Post added at 08:42 AM ---------- Previous post was at 08:16 AM ----------
A few minutes ago I have flashed my phone again with wiped system partition. Still problems with camera and NFC
Click to expand...
Click to collapse
I always go safely when upgrading major android versions. I do clean flash because I don't like doing dirty and it helps avoid me some problems