Develop Bugs

[ROOT][TWRP] Micromax A91 Ninja/ Cherry mobile thunder (Root only)

How to root Micromax A91 Ninja/ Cherry mobile thunder :
The phone (Micromax A91 Ninja/ Cherry mobile thunder) can be rooted with the bin4ry tool.
1.Enable USB Debugging. This is critically important.(go to Settings and then to Developer options.)
2.Install drivers for your phone using pdanet
3.Download Bin4ry's rooting tool from here
4.Extract the file you downloaded in the previous step. Right click on the RunMe.bat batch file and select Run as Administrator.
5.Connect your phone to the PC using USB cable.
6.In the RunMe.bat command window, follow the simple instructions that are given to you. First off you are supposed to enter a "1".
7.Later during the process, you will be asked to tap a restore button. You have to do that on your device, a popup for that will appear at the right time. Your phone will reboot a few times during the process.
8.When the process completes, a congratulatory message will appear on the command prompt screen.:victory:
Rooting voids your warranty do these steps after getting a clear information about Rooting!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to install TWRP(Team Win Recovery Project) - Micromax A91 Ninja only :
1. Download TWRP Recovery v2.4.2.0 extract it and copy recovery.img only to root of your SD Cards.
2. Download MobileUncleTools for MTK and install it.
3. Now open MobileUncleTools.
4. Give Superuser permissions.
5. Click on recovery update menu.
6. Then click on the recovery image name of ‘recovery.img’.
7. Dialog box opens (Are sure flash recovery) and tap OK.
8. Reboot into recovery mode using volume up + power key after power off.
9. Hurray! you have installed TWRP recovery on your Micromax A91 Ninja.
Credits:
Varun Chitre
yuweng
Cygwin

SPFlashtool is the BEST
SPFlashtool is much nicer than the Mobile Uncle Tools......:good:
Must use that...

droid man said:
SPFlashtool is much nicer than the Mobile Uncle Tools......:good:
Must use that...
Click to expand...
Click to collapse
this method can be done also using sp flash tools my friend. but the main problem of sp flash tools is if noobs flash wrong preloader or mess up with tool it may result in a brick...

droid man said:
SPFlashtool is much nicer than the Mobile Uncle Tools......:good:
Must use that...
Click to expand...
Click to collapse
give ur custom rom of ninja a91.

Yureka downgrade lollipop 5.0 to kitkat 4.4.4

Hello Members, I am about to share the final method for downgrading Yureka Lollipop to Kitkat Stock Rom.
You need to download these files
1. CM11 FASTBOOT SIGNED.ZIP DOWNLOAD LINK: http://builds.cyngn.com/factory/tomato/cm-11.0-XNPH05Q-tomato-signed-fastboot.zip
2. FASTBOOT DRIVERS DOWNLOAD LINK: https://drive.google.com/file/d/0B0_IwOvcRE4gWkpiRTBlenJoR1k/view?usp=sharing
3.LIST OF COMMANDS AND BAT FILE INCLUDED DOWNLOAD LINK: https://drive.google.com/file/d/0B0_IwOvcRE4gODk4R09GTDVVWW8/view?usp=sharing
You can enter each commands step by step or click on the bat file. But don't prefer the bat file procedure, you may get errors. I'm not responsible for any hard brick. try with on own risk.
Procedure:
1. Download these above files
2. Create a Folder name it as "Flash".
3. Extract CM11 Fastboot Signed and Fastboot Zips in that "Flash" Folder which you have just created.
4. Open the Folder and CLICK on the SHIFT button and right clicked on the mouse. You can see the "Open Command Window Here".
5. Clicking on " Open Command Window from here" will open a command window.
6. Switch off your yureka and press volume plus button and connect to the computer.
7. You will see the phone has been started in Fastboot Mode.
8. Now, You need to enter the given commands one bye one or just click on FLASH_ALL.bat file, which will flash everything easily.
9. Final step is to Reboot in Normal Mode.
10. You will be in KITKAT.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For more detail, I have uploaded a video in youtube. Please watch it. If I Helped you then please HIT THANKS.

fastboot
I am unable to set in fastboot device...
I tried a lot..can you please tell me the process of fastbooting the device

after done that procedure am i able to flash any custom rom based on cm 11 ?
after done that procedure am i able to flash any custom rom based on cm 11 ? or i have to rerooted my phone again ? plz send me rply bcoz i m going to downgrade to kitkat from buggy lollypop .

[Recovery][E9/E9+] TWRP Recovery 3.0.0-1 (UNOFFICIAL)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
E9 A53ML
https://www.androidfilehost.com/?fid=24421527759886207
E9+ A55ML
https://www.androidfilehost.com/?fid=24421527759886208
Install
View attachment ADB-Windows.rar
Code:
adb reboot download
fastboot flash recovery <filename>

For e9s nothing? A50aml.

Venozer said:
For e9s nothing? A50aml.
Click to expand...
Click to collapse
Try this, but I'm not sure it works fine or not, so test it by yourself.
https://www.androidfilehost.com/?fid=24421527759886645

cannot flash tecovery for me please help E9+ A55ML

nua69 said:
cannot flash tecovery for me please help E9+ A55ML
Click to expand...
Click to collapse
please show me the flash log.

Installation of this version was as usual, smooth as silk.
Love the newly added features.
E9+ A55ML

sabpprook said:
please show me the flash log.
Click to expand...
Click to collapse
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul

nua69 said:
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
Click to expand...
Click to collapse
drag the file into terminal window instead of typing filename.

nua69 said:
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
Click to expand...
Click to collapse
1. Download the file twrp-3.0.0-1-a55ml_dtul.img from the link on Post 1.
2. Copy this file to the ADB/Fastboot folder.
3. Power Off your phone.
4. Press Power + Volume Down for 7-10 Seconds.
5. You may reach Download Mode directly , or if you reach Bootloader, use volume button to highlight Download Mode and push Power button.
6. Check at the top to make sure that bootloader is unlocked. (You cannot flash if the status says Locked or Relocked)
7. Connect your phone to computer using USB-MicroUSB cable
8. Run Command Line Window from ADB/Fastboot folder.
9. Type : fastboot flash recovery twrp-3.0.0-1-a55ml_dtul.img
That's all.

hi
when i try to backup my ROM, it brings System and System Image in the menu options.
Is it necessary to select System Image in the menu options or only System is enough ?
thx
Sent from my HTC One E9PLUS dual sim using Tapatalk

Works well on E9
Thanks again for the upload. Flashing went well, without any problems, on E9 (not plus) TW version 1.50.709.3.
:good:

What features does this have over 2.8?
Thanks

The links are not working
The link for HTC one e9s is not working.

[RECOVERY + ROOT] 2016 P8000 6.0 (Also known as European B-version) PhilZ v2 and root

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Be careful: this is for the new 2016 of the P8000, which I believe is only available in Europe. That version is known as "P8000 6.0"
I have been trying to port PhilZ v2 to the new version and although it still has a few bugs/problems, at this point it at least allows you to root your device.
Download (recovery + root):
https://mega.nz/#!kUFBmSDb!RW3sTDPA-imxcNQihCiTfnsXAw_e0Fy-9djliPbxavo
(If you need scatter file, it's attached to this post)
To root:
1. Put Beta-SuperSU.zip on your internal memory
2. Download SuperSU from the Play Store
3. Turn off phone and flash recovery
4. Immediately boot into recovery (don't go into Android first or the recovery will be gone)
5. Choose flash zip from sd card
6. Select the Beta-SuperSU.zip
7. Reboot phone to Android from the menu (if the recovery asks to install root, choose no!)
8. Rooted
The recovery is now probably gone from you phone, because it resets to stock every time you boot into Android. If you like to keep it, rename /system/recovery-from-boot.p to recovery-from-boot.p.bak using ES File Explorer in root mode or something. Then flash the recovery again in SP Flash Tools.
Known bugs for recovery:
- ADB (plugging in cable) crashes recovery
- No access to external SD card, that's why you have to flash root from internal memory
- Touch not working
--
Use at own risk, I'm not responsible for anything.

Fix IMEI on P8000
Thanks to users @FrauHofrat and @ardrift
FrauHofrat said:
With a lot of thanks to user ardrift:
with *#*#6813#*#* entered on the stock dialer you can acess the "IMEI-Tool" which allows you to enter a new IMEI for both SIM cards. The new IMEI stay permanent even after reboot and this also works on 'old' P8000.
first I thought this is a joke but actually it worked - sometimes life can be so easy
Click to expand...
Click to collapse

Emileh said:
Thanks to users @FrauHofrat and @ardrift
Click to expand...
Click to collapse
Dont think it works on blueflame's CM. beliewe he tossed all the MTK stof :crying:

Ported TWRP 3.0.2 from several sources., but touch screen don't work. I've ported for other devices (MT6753,MT6580,MT6582) and never faced this issue. Need help (P8000 6.0)

100% Works,, Fastboot Mode Only,,no Boot,or bricked

here I will provide info about reflashing asus ze620kl, here I give everything that I have tried and succeeded
if you phone Stuck on Fastboot Mode or dead after flashing try this guide :
QFILL : https://bit.ly/3dqcZee
TWRP : https://bit.ly/3BQaNpy
RAW Frimware : https://bit.ly/3Ulf3EJ
OFFICIAL FRIMWARE FROM ASUS ZE620KL ( ANDROID 10 ) : https://bit.ly/3BpuvXS
Follow This Guide,
Open the Back Cover of you phone,,and look and test point below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
open QFILL Program, Select Flat Build, Chose Select Programer and browse located on RAW Frimware u are downloaded ( prog_emmc_ufs_firehose_Sdm636_ddr.elf )
and chose Load XML, select rawprogram_unsparse.xml and pacth0.xml
and you phone is opened, disconnect the battery connector then connect the two test points and plug in the data cable quickly,driver instled required,and select download button on QFIL
After succeed finish download,
turn on you phone into fastboot mode ( Vol + and Power Button ) and select fastboot flash recovery twrp-3.2.1-0-X00Q-20180508 .img,if succeed,reboot into bootloader
by command Fastboot oem reboot recovery
in TWRP mode,,you phone Sould 0mb internal Storage,, go Wipe,and erase internal storage and chose reboot option in twrp to reboot again in recovery mode,wipe again in this only wipe format data, and chace,,and instal the Frimware rom,,
viola,,you Zenfone 5 a life again

Hello QFILL link broken plz fix

zerolass said:
Hello QFILL link broken plz fix
Click to expand...
Click to collapse
QPST_2.7.480-20220823T041057Z-001
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com