[ROOT][TWRP] Micromax A91 Ninja/ Cherry mobile thunder (Root only) - Upgrading, Modifying and Unlocking

How to root Micromax A91 Ninja/ Cherry mobile thunder :
The phone (Micromax A91 Ninja/ Cherry mobile thunder) can be rooted with the bin4ry tool.
1.Enable USB Debugging. This is critically important.(go to Settings and then to Developer options.)
2.Install drivers for your phone using pdanet
3.Download Bin4ry's rooting tool from here
4.Extract the file you downloaded in the previous step. Right click on the RunMe.bat batch file and select Run as Administrator.
5.Connect your phone to the PC using USB cable.
6.In the RunMe.bat command window, follow the simple instructions that are given to you. First off you are supposed to enter a "1".
7.Later during the process, you will be asked to tap a restore button. You have to do that on your device, a popup for that will appear at the right time. Your phone will reboot a few times during the process.
8.When the process completes, a congratulatory message will appear on the command prompt screen.:victory:
Rooting voids your warranty do these steps after getting a clear information about Rooting!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to install TWRP(Team Win Recovery Project) - Micromax A91 Ninja only :
1. Download TWRP Recovery v2.4.2.0 extract it and copy recovery.img only to root of your SD Cards.
2. Download MobileUncleTools for MTK and install it.
3. Now open MobileUncleTools.
4. Give Superuser permissions.
5. Click on recovery update menu.
6. Then click on the recovery image name of ‘recovery.img’.
7. Dialog box opens (Are sure flash recovery) and tap OK.
8. Reboot into recovery mode using volume up + power key after power off.
9. Hurray! you have installed TWRP recovery on your Micromax A91 Ninja.
Credits:
Varun Chitre
yuweng
Cygwin

SPFlashtool is the BEST
SPFlashtool is much nicer than the Mobile Uncle Tools......:good:
Must use that...

droid man said:
SPFlashtool is much nicer than the Mobile Uncle Tools......:good:
Must use that...
Click to expand...
Click to collapse
this method can be done also using sp flash tools my friend. but the main problem of sp flash tools is if noobs flash wrong preloader or mess up with tool it may result in a brick...

droid man said:
SPFlashtool is much nicer than the Mobile Uncle Tools......:good:
Must use that...
Click to expand...
Click to collapse
give ur custom rom of ninja a91.

Related

[Q] ERROR 155: UNKNOWN ERROR - I want to Stock my HTC One V (GSM) Please help fast!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here i am,,, Please help me, i want to reset my HTC one V.
I followed the following steps:
Installed boot_signed, recovery_signed and also relocked.
No luck,,,i am stuck with error 155... Any help pleaseeee :crying:
bhanguaman said:
View attachment 2418750
Here i am,,, Please help me, i want to reset my HTC one V.
I followed the following steps:
Installed boot_signed, recovery_signed and also relocked.
No luck,,,i am stuck with error 155... Any help pleaseeee :crying:
Click to expand...
Click to collapse
You might try with that program: http://forum.xda-developers.com/showthread.php?t=1886562
Successfully Stock ROM
:good:
I was researched all night and finially got the right thing needed. I am happy to share with my Driod Friends who are facing this issue. :fingers-crossed:
Steps:
1. Google:
PrimoU_Asia_HK_2.24.708.1_Stock_Rooted_ODEX_FULL.zip
Click to expand...
Click to collapse
and download the file.
2. Unzip it and extract boot.img to Fastboot folder and also copy the zip to SD Card.
3. Run CMD in Fastboot Folder by using Shift+Right Mouse click.
4. Connect the phone in Fastboot Unlocked.
5. Enter this command in CMD:
fastboot flash boot boot.img
Click to expand...
Click to collapse
then use any Custom Recovery like CWM (Clockwork Mod Recovery) or TWRP
and place recovery.img to fastboot folder
then run:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
6. Back to bootloader and click Factory Restore.
7. Now you entered in Recovery, just wipe factory and wipe disk partition.
8. Click Install from SD Card, then select the zip file you copied to SD Card.
Confirm by clicking yes. Then wait for a while it may take upto couple of minutes.
9. You will see, Successful notification. Now reboot the phone normally.
10. Horrayy...!! We are back to original rom. Just select English at startup wizard. :laugh:
Tips:
Settings: Power - and unselect Fastboot.
:highfive: Happy Drioding :highfive:

[recovery][lewa v2.2][working]

hello everyone today im going to share lewa recovery which in reality is TWRP recovery you can install custom roms and backup your phone finally
Instruction
1-download archive
1.1 Double-click on the drive in Nokia NOKIA 3806 USB DRIVER Ver1.5.exe, follow the prompts to install the driver
1.2 Double-click on the drive in Nokia Nokia_Mobile_Phone_Driver_V2.00.10.msi, follow the prompts to install the driver
1.3 Double-click on the drive in Nokia NOKIA_USB_Driver_v4.8.6.msi, follow the prompts to install the driver
-2 Copy adb_usb.ini files to C:. \ Users \ username \ android directory
-3 make sure usb debuggin is turned on and battery is 50% atleast
-4 connect nokia x to pc and open recovery folder and run recovery.bat wait for completetion it will automatically boot into lewa recovery
now that we have custom recovery we can now wait for cyanogenmod:good::good:
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's really too bad that these chinese smali hacked roms do not ever share any information with the community, like recovery sources for graphics.c.
dhacker29 said:
It's really too bad that these chinese smali hacked roms do not ever share any information with the community, like recovery sources for graphics.c.
Click to expand...
Click to collapse
well we got ourselfs an working recovery lets start the rom building then
Another Way...!
unable to install Nokia NOKIA_USB_Driver_v4.8.6.msi.
and waited long after clicking on recovery.bat but after deamon nothing.
But was able to flash that using FLASHIFY app.
great working recovery.
What i did:-
1. copied recovery.img from recovery folder in the package to sd card.
2. and just flashed the image using flashify app (get it from playstore.)
3. now enjoying this functional recovery.
Cheers to all nokia x users...
TY..
didn't work..
mack2087 said:
unable to install Nokia NOKIA_USB_Driver_v4.8.6.msi.
and waited long after clicking on recovery.bat but after deamon nothing.
But was able to flash that using FLASHIFY app.
great working recovery.
What i did:-
1. copied recovery.img from recovery folder in the package to sd card.
2. and just flashed the image using flashify app (get it from playstore.)
3. now enjoying this functional recovery.
Cheers to all nokia x users...
TY..
Click to expand...
Click to collapse
Kuanzai92 said:
Click to expand...
Click to collapse
no dude its 100% tested.
ok read my post for whole procedure and if have any problem after that then just ask me there will be happy to help you.
go to this link :- http://forum.xda-developers.com/showthread.php?t=2700266
lewa recovery v2.2
need help...
my lewa recovery v2.2 is in Chinese language mode
how to change it in English language interface mode?
thank you
raamadhan said:
need help...
my lewa recovery v2.2 is in Chinese language mode
how to change it in English language interface mode?
thank you
Click to expand...
Click to collapse
Try to flash the one provided in the link above. It's in Eng language

[ROOT] [GUIDE] [CWM] For Evercoss A7A MTK 6572 100% Working Root Guide

Hey yo..!
This is 100% Working Method
This CTR recovery is for Evercoss a7a With 4.4.2 KitKat.
vio_tatsuya requested recovery for this phone and root procedures so i posted one.
Here are the procedures
1. Download Files Given Below.
2. Install Drivers From " Tools And Drivers.rar "
3.Open Sp flash tool and load Scatter "MT6572_Android_scatter.txt"
4.Chose recovery.img and make tick only on recovery.
5. Click on download
6. Connect phone with "USB Debugging on"
7.Double click on "RUN.bat" from " Tools And Drivers/adb/" (press yes if phone asks for permission)
Flashing will start
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now For Rooting
1.Put "UPDATE-SuperSU-v1.94.zip" in your sdcard
2.Connect phone with debugging ON
3.Double click on "RUN2.bat" from " Tools And Drivers/adb/"
4.You'll be in recovery mode now "install zip" and choose "UPDATE-SuperSU-v1.94.zip"
5.Your Phone is now rooted reboot enjoy.
6.Hit Thanks.:highfive:
Download Spfalsh tools
SP_Flash_Tool_5.1343.01.zip
Thanks
Thanks so much friend :good:
edited
I could not get into CWM
vi0_tatsuya said:
Thanks so much friend :good:
edited
I could not get into CWM
Click to expand...
Click to collapse
recovery.img updated please try again!
Stiil Failed
i'm edit my post
SUCCESS FINALLY
Thanks
vi0_tatsuya said:
i'm edit my post
SUCCESS FINALLY
Click to expand...
Click to collapse
hmm so finally it worked ..!
all credit goes to you
Screenshot ROOT
Thank so much fren
can't go to recovery :crying:
:crying: I can't go to recovery.. it's only white screen :crying:
please make way evecroos root a74d 4.4.2 kitkat
please make way evecroos root a74d 4.4.2 kitkat:crying:
abhimortal6 said:
Hey yo..!
This is 100% Working Method
This CTR recovery is for Evercoss a7a With 4.4.2 KitKat.
vio_tatsuya requested recovery for this phone and root procedures so i posted one.
Here are the procedures
1. Download Files Given Below.
2. Install Drivers From " Tools And Drivers.rar "
3.Open Sp flash tool and load Scatter "MT6572_Android_scatter.txt"
4.Chose recovery.img and make tick only on recovery.
5. Click on download
6. Connect phone with "USB Debugging on"
7.Double click on "RUN.bat" from " Tools And Drivers/adb/" (press yes if phone asks for permission)
Flashing will start
Now For Rooting
1.Put "UPDATE-SuperSU-v1.94.zip" in your sdcard
2.Connect phone with debugging ON
3.Double click on "RUN2.bat" from " Tools And Drivers/adb/"
4.You'll be in recovery mode now "install zip" and choose "UPDATE-SuperSU-v1.94.zip"
5.Your Phone is now rooted reboot enjoy.
6.Hit Thanks.:highfive:
Download Spfalsh tools
SP_Flash_Tool_5.1343.01.zip
Click to expand...
Click to collapse
I can't go to recovery. it white screen
thanks for this guide
Does it work on Win7 & above?
hi...
any suggestion for PC with win7 & above?
how to root swipe marathon 1gb...this method is not working on that handset

Yureka downgrade lollipop 5.0 to kitkat 4.4.4

Hello Members, I am about to share the final method for downgrading Yureka Lollipop to Kitkat Stock Rom.
You need to download these files
1. CM11 FASTBOOT SIGNED.ZIP DOWNLOAD LINK: http://builds.cyngn.com/factory/tomato/cm-11.0-XNPH05Q-tomato-signed-fastboot.zip
2. FASTBOOT DRIVERS DOWNLOAD LINK: https://drive.google.com/file/d/0B0_IwOvcRE4gWkpiRTBlenJoR1k/view?usp=sharing
3.LIST OF COMMANDS AND BAT FILE INCLUDED DOWNLOAD LINK: https://drive.google.com/file/d/0B0_IwOvcRE4gODk4R09GTDVVWW8/view?usp=sharing
You can enter each commands step by step or click on the bat file. But don't prefer the bat file procedure, you may get errors. I'm not responsible for any hard brick. try with on own risk.
Procedure:
1. Download these above files
2. Create a Folder name it as "Flash".
3. Extract CM11 Fastboot Signed and Fastboot Zips in that "Flash" Folder which you have just created.
4. Open the Folder and CLICK on the SHIFT button and right clicked on the mouse. You can see the "Open Command Window Here".
5. Clicking on " Open Command Window from here" will open a command window.
6. Switch off your yureka and press volume plus button and connect to the computer.
7. You will see the phone has been started in Fastboot Mode.
8. Now, You need to enter the given commands one bye one or just click on FLASH_ALL.bat file, which will flash everything easily.
9. Final step is to Reboot in Normal Mode.
10. You will be in KITKAT.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For more detail, I have uploaded a video in youtube. Please watch it. If I Helped you then please HIT THANKS.
fastboot
I am unable to set in fastboot device...
I tried a lot..can you please tell me the process of fastbooting the device
after done that procedure am i able to flash any custom rom based on cm 11 ?
after done that procedure am i able to flash any custom rom based on cm 11 ? or i have to rerooted my phone again ? plz send me rply bcoz i m going to downgrade to kitkat from buggy lollypop .

[Recovery][E9/E9+] TWRP Recovery 3.0.0-1 (UNOFFICIAL)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
E9 A53ML
https://www.androidfilehost.com/?fid=24421527759886207
E9+ A55ML
https://www.androidfilehost.com/?fid=24421527759886208
Install
View attachment ADB-Windows.rar
Code:
adb reboot download
fastboot flash recovery <filename>
For e9s nothing? A50aml.
Venozer said:
For e9s nothing? A50aml.
Click to expand...
Click to collapse
Try this, but I'm not sure it works fine or not, so test it by yourself.
https://www.androidfilehost.com/?fid=24421527759886645
cannot flash tecovery for me please help E9+ A55ML
nua69 said:
cannot flash tecovery for me please help E9+ A55ML
Click to expand...
Click to collapse
please show me the flash log.
Installation of this version was as usual, smooth as silk.
Love the newly added features.
E9+ A55ML
sabpprook said:
please show me the flash log.
Click to expand...
Click to collapse
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
nua69 said:
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
Click to expand...
Click to collapse
drag the file into terminal window instead of typing filename.
nua69 said:
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
Click to expand...
Click to collapse
1. Download the file twrp-3.0.0-1-a55ml_dtul.img from the link on Post 1.
2. Copy this file to the ADB/Fastboot folder.
3. Power Off your phone.
4. Press Power + Volume Down for 7-10 Seconds.
5. You may reach Download Mode directly , or if you reach Bootloader, use volume button to highlight Download Mode and push Power button.
6. Check at the top to make sure that bootloader is unlocked. (You cannot flash if the status says Locked or Relocked)
7. Connect your phone to computer using USB-MicroUSB cable
8. Run Command Line Window from ADB/Fastboot folder.
9. Type : fastboot flash recovery twrp-3.0.0-1-a55ml_dtul.img
That's all.
hi
when i try to backup my ROM, it brings System and System Image in the menu options.
Is it necessary to select System Image in the menu options or only System is enough ?
thx
Sent from my HTC One E9PLUS dual sim using Tapatalk
Works well on E9
Thanks again for the upload. Flashing went well, without any problems, on E9 (not plus) TW version 1.50.709.3.
:good:
What features does this have over 2.8?
Thanks
The links are not working
The link for HTC one e9s is not working.

Categories

Resources