Develop Bugs

Please Help after hard reset with v1640 (vodafone uk)

Hi,
I have received now my v1640. The first that i do was a hard reset, and now the v1640 ask for a password with 4 numbers and i dont know which is . Can somebody help me? If i put several times an incorrect password, can i lock the device?
I bought the v1640 by internet and its locked for vodafone uk. My provider is vodafone spain, and i know that the device is provider locked. My problem now is that before of doing the hard reset, i can use the v1640 like a PDA without SIM, but now its impossible to get into the SO because the Phone ask me for a password.
Thanks.

I'd suggest, if you cannot pass the security code, to upgrade for the latest imate rom. You'll end up doing this anyway...
I guess by pressing LIGHT + ON/OFF + RESET your device goes to SERIAL 1.0. Then you can install latest image ROM.
But anyway do a search before doing something..

The only sotware lock on a v1640 without the new rom is the sim lock on the phone.
The fact you can only use it as a pda confirms this.
It must be a password you put on your own sim.
The settings are on the bottom of the phone screen under options.
You have 3 attemps or it will lock.
If you call vodafone they will give you a number to unlock it.
Set a new password and WRITE IT DOWN.
Then set the option to either on or off, as everytime you turn on the phone (change battery etc or flight mode) it will either ask for this number or not.
steve

The only sotware lock on a v1640 without the new rom is the sim lock on the phone.
The fact you can only use it as a pda confirms this.
It must be a password you put on your own sim.
The settings are on the bottom of the phone screen under options.
You have 3 attemps or it will lock.
If you call vodafone they will give you a number to unlock it.
Set a new password and WRITE IT DOWN.
Then set the option to either on or off, as everytime you turn on the phone (change battery etc or flight mode) it will either ask for this number or not.
steve

My SIM card does not start :(

Hello,
I have problem - When I turn on my BA and field for PIN entering appears I enter my PIN code and click OK and then it does not go further it just still stuck on PIN entering screen. When I put another Sim Card on my phone wich dont have PIN protection its just No Service I have no idea what is going on, please help me.
Edit: some info: I didint checked it on WM2003 because when I bought phone I instantly installed WM6 because I'm buying and resseling phones and this never happened before. I also upgraded radio to 1.15 but still no changes.

The same occurred to me today, my phone freezed while I was typing an e-mail, so I pushed the reset button. After booting (TNT wm6) and pressing the unlock code, my phone freezed.
Sometimes it allows me to enter my pin (4 digits), sometimes I can only enter one or just nothing.
When I tried with another SIM it worked.. I'm at home now and I tried to boot without a SIM, but it still freezes after the unlock code.
I'm thinking of flashing my phone back to the original firmware to check if that solves the problem. The only problem is that I’ll lose all my messages. I don't care much about the Calendar and contacts, since I sync with exchange..
Anyone has a solution other than flashing a new OS?
Phone model: i-mate K-Jam

jupieee i fixed it i just had to downgrade to wm2003 and then enter unlock code. dont know why it didint worked on wm6 and wm5

probably a flash gone bad. or another GSM/3G Band conflict...
Read my thread about no phone/ no service here... some pointers may help

I know how to do
Just use the stick press the reset hole when the screen is made of four color after you have changed the battery.

Stuck With Okta Touch

I am stuck with this phone which i bought from NZ. Okta touch Configured for TNZ i want it to work with indian network i.e. TATA Indicom. I was in the phone thru qpst but when it was asking for SPC i entered the generated code from GETSPC, But then qpst responded with an error saying incorrect Service programming code, phone will not respond for upto 10 seconds.
i entered all the alphabets in capital as shown at the back of phone.
I even did a hard reset but all went in vain. I am worring that finally am i stuck with a brick.
Please Guys help me to configure this phone for TATA

Got the problem sovled by using pocket putty.. GETSPC was not giving the right SPC code.

[Q] Garmin Asus a10 network locked

Hello,
I have got a big problem with my Asus a10. Somehow, yesterday, when i took it out of my pocket the screen said enter code. I tried entering my pin code and my puk code, both didnt work, the only thing that happened was that it locked my phone. Now everytime i boot up the phone it starts with the enter code screen and it says 1 attempt left. Everytime i try to enter a code it just blockes, takes me to the homescreen and says network locked. The only thing i can do from there is turn off the phone or make emergency calls.
When i reboot, it still says 1 attempt left.
I tried hard resetting the phone by holding both volume keys and the power key, didnt work either.
The strange thing is, it happens also when the sim card is out.
I also tried to update the firmware but you have to enable the usb file transfer mode and i cant enable that because its locked!
Does anyone have any idea or do i have to send the phone to garmin?? The problem with that is that i rooted it and that voids the warranty, and i cant unroot it because i need to enable usb file transfer!
thanks in advance..
Peter

So no one has had this problem before?
Sorry for the shameless bump hehe
Sent from my HTC HD2 using XDA App

touch pro 2 wont accept unlock

Hi .
read a few threads about this problem, but they seem old - is there any way to unlock the tp2 ?
i have used the same pin for over a year and suddenly it said "incorrect password" when trying to unlock.
now it doesnt even give a "response" when tapping the unlock button.
i can tap in an emergency number and call that but nothing more.
when i try to connect to pc i get error that device is unlocked and pls unlock to sync.
any tips ?

Assuming that you are referring to the WM OS pin code, no. There is no way short of a hard reset to clear that out.
Sorry. Hope you have a somewhat recent backup. Otherwise you are SOL.