Develop Bugs

Hardware ID Missing after rooting......

Hello.
I used the Toolkit to root my Note 2, and I had to use option 4 on the rooting menu, Install Custom Recovery, Install via Recovery to get it to work. I tried several times via the Odin tool and Twrp recovery, and the phone kept booting into Android Recovery instead of Twrp recovery.
I finally used Odin to flash back to stock ROM that I got here, but, along the way, even though the Toolkit was able to connect to my Note 2, I get the Hardware ID missing, and I cannot connect to it any longer like I could after I installed the initial drivers.
Anything I can do and stay rooted?

Change usb ports or restart your device. Mine did it last night and I fixed it by doing both..

I have the same problem.
Changing ports and restarting in most cases didn't help and only in few cases I managed to access files on the phone via USB.
Any other suggestion how to solve this?

don't use windows..

Ditto
dstenc said:
I have the same problem.
Changing ports and restarting in most cases didn't help and only in few cases I managed to access files on the phone via USB.
Any other suggestion how to solve this?
Click to expand...
Click to collapse
glen4cindy said:
Hello.
I used the Toolkit to root my Note 2, and I had to use option 4 on the rooting menu, Install Custom Recovery, Install via Recovery to get it to work. I tried several times via the Odin tool and Twrp recovery, and the phone kept booting into Android Recovery instead of Twrp recovery.
I finally used Odin to flash back to stock ROM that I got here, but, along the way, even though the Toolkit was able to connect to my Note 2, I get the Hardware ID missing, and I cannot connect to it any longer like I could after I installed the initial drivers.
Anything I can do and stay rooted?
Click to expand...
Click to collapse
I was able to gain root back using the toolkit. I flashed stock rom image I believe the ROM from the factory then flashed back stock recovery. Went back in after I updated and re-rooted to flash the triangle away. Now I need to unroot and after speaking with Sprint Rep on phone and trying a few things they advised me to take it to store to let them try it. I believe ALL of my problems started when I tried to use Mobile Odin Pro to flash the latest update to LJC (should I have been on stock recovery?). It started to flash then stopped and went into CWM recovery which is the recovery that the toolkit flashed. I for some strange reason was going to flash the update from there except I didn't have it in the right place on my sd card (couldn't access it GOD I'm a Dumbass!). God help me cause I'm too stupid to even understand what side loading is let alone how to do it. If some kind soul would take pity on me and pm me I could get a handle on the differences between HTC and Samsung. Anyway need to unroot now. Oh I keep seeing in the flash counter saying 1 but I'm on stock rom with stock kernel and stock recovery how do I get it to zero. Using triangle away. Anyway to check counter with stock recovery?
OH yeah does anyone keep getting "Internal Error Code 1500" in addition to the hardware id is missing?
Thanks to everyone that takes time to help idiots like me. I promise I CAN learn.
Charles

chrisc627 said:
Change usb ports or restart your device. Mine did it last night and I fixed it by doing both..
Click to expand...
Click to collapse
Thank you...Unlike user: dstenc, the above procedure fixed my issue. As has been the case many times, XDA helpful users to the rescue!
:laugh: :good:

Just to report that for now I've found woraround. I've installed old drivers 1.4.103.0 and now both Kies and file access works.
Still looking for final solution with latest drivers.

Could you walk me through your fix?
dstenc said:
Just to report that for now I've found woraround. I've installed old drivers 1.4.103.0 and now both Kies and file access works.
Still looking for final solution with latest drivers.
Click to expand...
Click to collapse
Hi dstenc,
Would you be so kind as too help me do what you did? I don't have kies on my pc, did you get the old drivers from the s3 forum? I would love to give it a shot.
Thanks for any help
Charles

Could you walk me through your fix?
Mods please delete double post sorry

ceabbott2 said:
Hi dstenc,
Would you be so kind as too help me do what you did? I don't have kies on my pc, did you get the old drivers from the s3 forum? I would love to give it a shot.
Thanks for any help
Charles
Click to expand...
Click to collapse
I don't remember link. I googled so you might try that way.
Just FYI, even with older drivers I have sporadic Hardware ID Missing error, but far too less than with the latest version.

I'm posting this to keep it to the top of this board.
This is my second Note 2 in 2 weeks. I returned the first one because it stated Hardware ID missing, so within my first 2 weeks Sprint gave me a new one thinking that it was my phone. While at the Sprint store, and not yet rooted, we installed the unit and removed the unit 15 times to see if we could get it to have the Missing Hardware ID to pop up, it DIDN'T pop up once, so I thought I was good to go.
I came home and did the common root method that uses Galaxy Note 2 Toolbox. I IMMEDIATELY started getting the Missing Hardware ID again.
So now that we have it localized, what could be missing or creating a problem from the root procedure from the Galaxy Note Toolbox 2???
What I find really strange is that many are not experiencing this problem or they are just living with it.
I even tried the USB Switcher that appeared to install and does switch between Mass Storage and MTP, but although my PC makes the upward noise that sounds like it is installing and recognizing the USB Mass Storage, it doesn't end up recognizing it. It was ZATTA's build but he said it didn't work for his Galaxy 3 or Note 2 either.
Will anyone find a cure????
This will be no fun to have to deal with for the next 2 years.
Chime in PLEASE!!!!!! Even if it's only to insult me, I don't care if you have a cure.
Regards
Dave

if you do Google search, it's a known issue. From what I read, it's a driver issue. Some have had luck using the older Samsung USB drivers. You have downloand them, and install, and have your PC completely disconnected from the internet before plugging in your GN2 after the install. Appaarently the drivers on Microsoft's servers are bad; may be the wrong device.
I've done this, and still have the issue. I just find I don't have plug and unplug the USB cable as much.
What I have seen, the PC does connect to the GN2. It just doesn't recognize it as a storage device. It wants to use it as a modem, probably from the tethering capabilities with a USB OTG cable.
It may not be so much that it's not wide spread, but more that not everyone uses the GN2 as storage device or connects it their PC.

I dont think this is all due to Windows issue. This is what i notice before and after root.
If you have restore to Original Stock ROM, you will notice that your device doesnt encounter this issue.
If you have rooted your device Custom ROM or Flash CMW (this resulted as Binary Counter increased), you would have Hardware Missing Id issue. Somehow the MTP is not working.
If you have Flash your device with a pre rooted stock rom, there is no issue at all until you flash CMW where flashing increase counter.
How i notice this, i have root/unroot my device like 20 times since i got my device.
The issue is here is more of where Binary Counter Increase, in Windows 7 you would face Hardware ID Missing issue. Restart and connect to other USB port will not work.
Some how we need to no let the Binary Counter changed and Triangle Away is only useful if you want to return you device to original state.

knightfox said:
I dont think this is all due to Windows issue. This is what i notice before and after root.
If you have restore to Original Stock ROM, you will notice that your device doesnt encounter this issue.
If you have rooted your device Custom ROM or Flash CMW (this resulted as Binary Counter increased), you would have Hardware Missing Id issue. Somehow the MTP is not working.
If you have Flash your device with a pre rooted stock rom, there is no issue at all until you flash CMW where flashing increase counter.
How i notice this, i have root/unroot my device like 20 times since i got my device.
The issue is here is more of where Binary Counter Increase, in Windows 7 you would face Hardware ID Missing issue. Restart and connect to other USB port will not work.
Some how we need to no let the Binary Counter changed and Triangle Away is only useful if you want to return you device to original state.
Click to expand...
Click to collapse
Yep I think you may be on to something. Because when I rooted I tried both TWRP and CWM and then I had to go back to stock to get to apply the LJC update. Ever since I have had the chameleon error and Handsfree activation issues. Oh my counter always says 1 and I can't remove it with triangle away. I think it says custom binary yes and the counter says 1. I am using a laptop with Windows 7 and it now recognizes the device just can't stop the errors on start up.
Charles
Sent from my SPH-L900 using xda premium

Samsungs older drivers: uploaded.net/file/hdh0f1xd

Insert Sim card for network access

I tried to Root my Rogers Galaxy Note II using
howtoteachers.wordpress.com/2013/02/09/root-sgn2 (the first Option) new user I couldnt put the HTTP at the start.
And after completing all the steps My phone does not connect to my Mobile network anymore.
gives message to insert sim card for mobile services, obviously my sim card is in the device.
Help Please I need my phone Back!
Thanks
B-Kaspr

I have heard of people that when flashing their sim card's get fried. Try putting in another sim or go to the rogers store and just tell them your sim doesn't work in the phone. Don't tell them why just say it stopped working. Obviously don't show them your phone or let them touch it cause they will realize it has custom recovery and will void the warranty.
This is assuming that your sim card is in the phone and it isn't being shown. If the sim is being recognized and it isn't letting you make voice or data calls then I wouldn't know what the problem is.
Goodluck!

Yeah I heard that too
Yeah I heard that the sim can get fried but mine works fine in another phone just not my Note II.
I am going to try and reset it to stock and hopefully that will work.
I am new to this stuff. Is it possible to completely reset and wipe the root from the phone so they will not know that it was rooted?
Cheers
Bob

Hsve you tried a factory reset from recovery or from OS yet?
Also being new you should read up on rooting etc begore doing so.
I made a tutorial how to get back to stock via samsungs recovery tool.
Sincevyour phone is not borked, just try to do upgrade first, you prob dont need to do the EFR.
Scroll through and click the link to thegalaxy note 2 toolbox.
Nothings easier to root or unroot.
If it makes you unsurevusevthe Samung method via kies.
Note: it is recomended not to have kies installed when using GN2 tool box.
Make sure you READ, and follow eveything thoroughly.
The guy I tried helping out kept going back to odin, after I told him not to
Dontvuse odin until you are secure with what you are doing.
Odin can fail lots of chance for user error.
EFR when done right is always your best bet, and works 100% if your able to get to dl mode:
Hope this helps. Galaxynote2 toolbox link is in this thread:
http://forum.xda-developers.com/showthread.php?t=2229965
Gl and post back!

[Q] Need help going back to stock, there's some complications with my phone now.

I've spent all day yesterday trying to fix this problem. I've downloaded gigs upon gigs of stock rom files, saw a ton of youtube videos etc. Still nothing.
So here's the deal. I had Cyanogenmod 10.2 on my phone for a while now and I've always had problems, although a nice rom but too many crashes, battery drainage etc. So I wanted to go to stock but before doing so I thought I'd give Cyanogenmod 11 a try and see how that works, which turns out to be worse and I lost all phone signal and data, pretty much no service. So now I tried to go back to stock for good. I downloaded the stock 4.1 something rom file, odin and tried going back which didn't work cause I would keep getting a fail sign on odin. By the way I tried different versions of Odin since that was suggested to me by my friend and that didn't do anything either. Then I read a blog about using Samsung Kies on my PC, now after I did that I got a message on kies that my phone encountered an error. Now when I turn my phone on I get a message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Is my phone bricked for good? Can I go back to stock? I'm not sure what else to do here now. Why is it hard finding a stock unrooted 4.3 rom for my phone on the internet? I also can't use that clockwork recovery mode either, it just gives me the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" when I try going into that to even try and install Cyanogenmod again so I can use my phone until I find a solution to going back to stock.
Help ploxkthxbai.
Edit: Ok so I just installed clockworkmod recovery through odin and I was able to install a rooted stock rom through the recovery, but now the problem I'm encountering is that it gets stuck on the AT&T logo when booting up the phone. Installing stock rom through odin still gives me the fail message.
Edit 2: I tried installing a stock unrooted rom through recovery and it gave me some error but now the phone goes passed the AT&T logo after that however I have no service now. How do I fix that and how should I go about installing stock unrooted rom since Odin gives me the fail message?

Dagobert_ said:
I've spent all day yesterday trying to fix this problem. I've downloaded gigs upon gigs of stock rom files, saw a ton of youtube videos etc. Still nothing.
So here's the deal. I had Cyanogenmod 10.2 on my phone for a while now and I've always had problems, although a nice rom but too many crashes, battery drainage etc. So I wanted to go to stock but before doing so I thought I'd give Cyanogenmod 11 a try and see how that works, which turns out to be worse and I lost all phone signal and data, pretty much no service. So now I tried to go back to stock for good. I downloaded the stock 4.1 something rom file, odin and tried going back which didn't work cause I would keep getting a fail sign on odin. By the way I tried different versions of Odin since that was suggested to me by my friend and that didn't do anything either. Then I read a blog about using Samsung Kies on my PC, now after I did that I got a message on kies that my phone encountered an error. Now when I turn my phone on I get a message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Is my phone bricked for good? Can I go back to stock? I'm not sure what else to do here now. Why is it hard finding a stock unrooted 4.3 rom for my phone on the internet? I also can't use that clockwork recovery mode either, it just gives me the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" when I try going into that to even try and install Cyanogenmod again so I can use my phone until I find a solution to going back to stock.
Help ploxkthxbai.
Click to expand...
Click to collapse
The easiest way to fix it is to take it to a best buy store they will flash stock 4.3 on it free of charge, this is the advice that is now given by Samsung. Alternatively you could get the phone jtag'ed or while it says firmware upgrade encountered an issue it is in download mode and you can flash things with Odin. You can attempt to flash a recovery image to see if you can access recovery and flash enewman17's stock restore from the development section. You can also attempt to hard brick it with Odin by flashing stuff that has pre 4.3 bootloaders then use the debrick method here http://forum.xda-developers.com/showthread.php?t=2549068.
I recommend you try the best buy method first, then try to flash a recovery, then try to hard brick it and recover it and lastly to get it jtag'ed.
If you can't get it recovered after intentionally hard bricking it you haven't lost anything you were still going to need a jtag service but it might work.
Under the advice of Samsung I tried the same thing you did and they told me to take it to best buy to get it fixed, instead I hard bricked it then used the sd card method to debrick it. Which I had already done twice. But that method doesn't work for everyone I was lucky 3 times and had to jtag once(flashed the i747m bootloader bad idea had to jtag) since then I have quit pushing my luck and only flash things I know are safe for the phone.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Dagobert_ said:
I've spent all day yesterday trying to fix this problem. I've downloaded gigs upon gigs of stock rom files, saw a ton of youtube videos etc. Still nothing.
So here's the deal. I had Cyanogenmod 10.2 on my phone for a while now and I've always had problems, although a nice rom but too many crashes, battery drainage etc. So I wanted to go to stock but before doing so I thought I'd give Cyanogenmod 11 a try and see how that works, which turns out to be worse and I lost all phone signal and data, pretty much no service. So now I tried to go back to stock for good. I downloaded the stock 4.1 something rom file, odin and tried going back which didn't work cause I would keep getting a fail sign on odin. By the way I tried different versions of Odin since that was suggested to me by my friend and that didn't do anything either. Then I read a blog about using Samsung Kies on my PC, now after I did that I got a message on kies that my phone encountered an error. Now when I turn my phone on I get a message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Is my phone bricked for good? Can I go back to stock? I'm not sure what else to do here now. Why is it hard finding a stock unrooted 4.3 rom for my phone on the internet? I also can't use that clockwork recovery mode either, it just gives me the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" when I try going into that to even try and install Cyanogenmod again so I can use my phone until I find a solution to going back to stock.
Help ploxkthxbai.
Edit: Ok so I just installed clockworkmod recovery through odin and I was able to install a rooted stock rom through the recovery, but now the problem I'm encountering is that it gets stuck on the AT&T logo when booting up the phone. Installing stock rom through odin still gives me the fail message.
Edit 2: I tried installing a stock unrooted rom through recovery and it gave me some error but now the phone goes passed the AT&T logo after that however I have no service now. How do I fix that and how should I go about installing stock unrooted rom since Odin gives me the fail message?
Click to expand...
Click to collapse
Do you still have your IMEI on your phone or is it showing 0?

Dagobert_ said:
Edit 2: I tried installing a stock unrooted rom through recovery and it gave me some error but now the phone goes passed the AT&T logo after that however I have no service now. How do I fix that and how should I go about installing stock unrooted rom since Odin gives me the fail message?
Click to expand...
Click to collapse
Go to settings, about device, what does it show for baseband? Then go to settings, status does the imei number for the phone show up, say unknown or 0? If it shows unknown for the baseband and imei you simply need to flash a modem. If it shows the correct baseband but your imei shows as 0 your imei has become corrupt search for imei restore the fresh a ton of threads about it most people loose lte after an imei restore but there is a fix for that too. If you are having problems with wifi try flashing a kernel.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Go to settings, about device, what does it show for baseband? Then go to settings, status does the imei number for the phone show up, say unknown or 0? If it shows unknown for the baseband and imei you simply need to flash a modem. If it shows the correct baseband but your imei shows as 0 your imei has become corrupt search for imei restore the fresh a ton of threads about it most people loose lte after an imei restore but there is a fix for that too. If you are having problems with wifi try flashing a kernel.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I just did that and my phone is now hard bricked. Won't turn on at all, won't vibrate or anything. It's completely dead. Tried the sd card method and that's not working so far. So I need a jtag service for this. Not even sure what that is right now until I look that up after this reply. I did look into those usb jigs but it seems that's only if it's soft bricked.
Edit: Trying the sd card method on the 4th try worked. Now back to fixing this.

Dagobert_ said:
I just did that and my phone is now hard bricked. Won't turn on at all, won't vibrate or anything. It's completely dead. Tried the sd card method and that's not working so far. So I need a jtag service for this. Not even sure what that is right now until I look that up after this reply. I did look into those usb jigs but it seems that's only if it's soft bricked.
Edit: Trying the sd card method on the 4th try worked. Now back to fixing this.
Click to expand...
Click to collapse
What did you flash that hard bricked your phone? A modem should have been pretty safe to flash. I have flashed a bunch of different ones the worst that ever happened to mine was no service or poor service.
What exactly still needs fixing? No service still? Did you check imei and baseband? Intact, unknown or 0? Will be available till about 7am off and on.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
What did you flash that hard bricked your phone? A modem should have been pretty safe to flash. I have flashed a bunch of different ones the worst that ever happened to mine was no service or poor service.
What exactly still needs fixing? No service still? Did you check imei and baseband? Intact, unknown or 0? Will be available till about 7am off and on.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Oh man, I might be sounding like a total noob by now but damn I've never had problems installing custom roms and going back to stock before.
So I flashed a modem that was for my phone and carrier in some thread here and that hard bricked my phone when I rebooted my phone. I tried the sd card method and in the end that worked and I could start my phone but no service or anything which at this point is the least important thing. In that thread of the sd card method it mentions how to flash a bootloader to make the phone not require the sd card (which was requiring it on my phone to start up the phone) and now it's hard bricked by trying that, and the sd card is not making it boot into download or recovery mode at all now.
If only I had enough to buy another phone I would seriously punch this phone repeatedly until nothing was left. I've spent like 2 days on this phone now with about 5 hours not counting sleep of time away from fixing this phone.

Dagobert_ said:
Oh man, I might be sounding like a total noob by now but damn I've never had problems installing custom roms and going back to stock before.
So I flashed a modem that was for my phone and carrier in some thread here and that hard bricked my phone when I rebooted my phone. I tried the sd card method and in the end that worked and I could start my phone but no service or anything which at this point is the least important thing. In that thread of the sd card method it mentions how to flash a bootloader to make the phone not require the sd card (which was requiring it on my phone to start up the phone) and now it's hard bricked by trying that, and the sd card is not making it boot into download or recovery mode at all now.
If only I had enough to buy another phone I would seriously punch this phone repeatedly until nothing was left. I've spent like 2 days on this phone now with about 5 hours not counting sleep of time away from fixing this phone.
Click to expand...
Click to collapse
Are you certain the battery is charged? Should be a question that should be un asked but it does happen. The bootloader you flashed you're sure was for your model and carrier(AT&T vs canadian)? If you flashed the wrong model bootloader then you will need to jtag, If not when I was debricking my phone I had to do a battery pull after each time I wanted the phone to boot with the debrick SD. Are you doing that I don't want you to feel stupid but if you have a lack of sleep and are frustrated simple things can be overlooked. My thought is that If the sd method worked before it should work now especially if you are using the same debrick image. Out of curiosity what model is your phone and carrier?
I wish you the best of luck and hope all works out.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Are you certain the battery is charged? Should be a question that should be un asked but it does happen. The bootloader you flashed you're sure was for your model and carrier(AT&T vs canadian)? If you flashed the wrong model bootloader then you will need to jtag, If not when I was debricking my phone I had to do a battery pull after each time I wanted the phone to boot with the debrick SD. Are you doing that I don't want you to feel stupid but if you have a lack of sleep and are frustrated simple things can be overlooked. My thought is that If the sd method worked before it should work now especially if you are using the same debrick image. Out of curiosity what model is your phone and carrier?
I wish you the best of luck and hope all works out.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah the battery is charged, I've tried the battery on another phone as well. I do pull out the battery and all that, and yeah I know simple things can be overlooked. Which is why I tried again today. Oh well I guess it's just one of those things that just won't work for whatever reason. Anyways, my model is SGH-I747 for AT&T. I even made sure that none of it was the SGH-I747M. Oh well jtag is what it is, I guess I rather pay than have to deal with this problem. Only thing is that I've never done that before and so many people are offering it on ebay and I don't know who to go with, I mean I'm sending my phone to someone with no real guarantee or anything that I will get my phone back. And yeah there's user feedback but that could also mean a thousand fake accounts giving good reviews or friends and family giving good reviews for 1 penny sales. Anyone you suggest I go with? Either on ebay or out of ebay? Thanks for all the help btw.

Everything seems to be going downhill for me right now. My computer will not recognize any Micro SD or SD cards. It will recognize pro duo cards but not any SD or Micro SD card. I tried all my Micro SD cards and SD cards today and none of them are being detected although they do show up in MiniTool Partition Wizard. I even bought another card reader and it's the same thing. So now my computer is being a twat about this. I think I might as well just listen to some Linkin Park and slit my wrists to end it all. But before I do that, anyone know why my PC won't recognize SD and Micro SD all of a sudden?

[Help] s4 mini stuck on samsung logo

Sorry if this post doesn't belong here but I'm really desperate!!.
I had a custom software (all worked perfect) but the phone was missing memory so I factory reset it, following that I noticed that the "various files" size was still 2Gb (as before), so I tried to delete all of it.
I think this is where I screw it up... went to recovery mode again, then formatted all.... system, cache, data, boot aaand (yes, I'm an idiot) data, data/media.
Tried everything, format factory again, install CWM with odin again, CAN'T ENTER SAFE MODE
PLEASE HELP ME, I don't know what else to do!
I really can't allow to buy another phone and I really like this one.

akima624 said:
Sorry if this post doesn't belong here but I'm really desperate!!.
I had a custom software (all worked perfect) but the phone was missing memory so I factory reset it, following that I noticed that the "various files" size was still 2Gb (as before), so I tried to delete all of it.
I think this is where I screw it up... went to recovery mode again, then formatted all.... system, cache, data, boot aaand (yes, I'm an idiot) data, data/media.
Tried everything, format factory again, install CWM with odin again, CAN'T ENTER SAFE MODE
PLEASE HELP ME, I don't know what else to do!
I really can't allow to buy another phone and I really like this one.
Click to expand...
Click to collapse
Hello,
I have reported this thread to be moved to right Q&A section in order to get expertise help.
-Vatsal

Vatsal said:
Hello,
I have reported this thread to be moved to right Q&A section in order to get expertise help.
-Vatsal
Click to expand...
Click to collapse
Thanks but I already solved the problem. Using the restore from Kies.
Method 3: Fixing Galaxy S4 stuck at Samsung Logo Using Kies 3 Firmware Initialization method
This has been a proven a working solution as Samsung also recommended it if your phone suffers software update failure and you ended up from booting problem. The full detailed guide can be found here. This has fixed several issues such as bootloop once after initiating software updates and gets into an Emergency Recovery Failed but can also resolve on frozen Samsung logo problem.
To be able to use this method you will importantly need to download and install Kies 3 in your computer and your phone’s model number and the S/N number which can be found on the label underneath your phone’s battery. This process also wipes out all your stored data and will not be recoverable once you take this method.
Grab Kies 3 from Samsung. Once installed, run it.
Click Tools > Firmware Upgrade and Initialization.
Enter your device Model name and click OK.
Enter the device S / N number and click OK.
Then follow each of the given instruction on Kies 3.
If Kies couldn’t recognized you phone for some reasons that you might have a modified firmware running then your best shot is to forcefully install back the official firmware version on your Galaxy S4. Just continue reading and or use Method 4 instead.
Click to expand...
Click to collapse
Thank you, really. Your response was incredible fast

[Help] Another Note 4 Soft Bricked

Hello,
I know you're probably thinking, "omg another note bricked thread". Yes, but I spent many hours of research and couldn't find a thread with my exact problem.
A little background:
I rooted my phone and everything was fine and dandy. I let a friend borrow my phone for a minute and they decided that it would be funny to uninstall google play. I installed the apk from online and had nothing but problems. The app would crash as soon as i started downloading anything. I looked into solutions and did everything from editing the host file to wiping the caches. Nada. The "solutions" just caused other errors. I decided to wipe and reinstall from my backup.
I realized after that because Google Play is a system file, my restore was useless. I decided to wipe everything and reflash the stock firmware with Odin. I downloaded the right one for the verizon model on 5.1.1. Odin sent the file to the device. Just before finishing there was an error and the phone rebooted anyway.
Upon booting the phone now lacked an OS and gave the "use the verizon repair assistant to reinstall the operating system" message. I tried the software (from a friends s5) on 3 different computers and it wouldn't work on any.
I figured, no problem, I will just reflash to stock with Odin again. Only this time my computer no longer recognizes the phone when I put it into download mode. Ive installed and reinstalled the drivers, changed the order of connecting the cables, and when the phone is booted. Nothing works.
The phone can only boot regularly (but lacks an OS) or go to download mode. Recovery doesn't work. Any ideas? Help would greatly be appreciated as the nearest phone repair center is close to 40 miles away
Tl;dr
Phone doesnt have an OS, can boot to download mode, but isn't recognized by computer. The basic troubleshooting steps haven't worked.

Hi urban.. I'm not to technical, but was reading your post. I hit a little confused... Your using the s5 Verizon recovery, not Odin image right
Also try uninstalling the Windows drivers and reinstall after you connect to computer
Sent from my SM-N920V using Tapatalk

Bern612 said:
Hi urban.. I'm not to technical, but was reading your post. I hit a little confused... Your using the s5 Verizon recovery, not Odin image right
Also try uninstalling the Windows drivers and reinstall after you connect to computer
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
I tried the verizon recovery for the S5 (I don't have it for the note) and the software wouldn't load. Originally I reflashed the phone with an Odin image but now Odin doesn't recognize the phone.
Yup, I've tried that many times on different computers. Thanks though.

Urban415 said:
Hello,
I know you're probably thinking, "omg another note bricked thread". Yes, but I spent many hours of research and couldn't find a thread with my exact problem.
A little background:
I rooted my phone and everything was fine and dandy. I let a friend borrow my phone for a minute and they decided that it would be funny to uninstall google play. I installed the apk from online and had nothing but problems. The app would crash as soon as i started downloading anything. I looked into solutions and did everything from editing the host file to wiping the caches. Nada. The "solutions" just caused other errors. I decided to wipe and reinstall from my backup.
I realized after that because Google Play is a system file, my restore was useless. I decided to wipe everything and reflash the stock firmware with Odin. I downloaded the right one for the verizon model on 5.1.1. Odin sent the file to the device. Just before finishing there was an error and the phone rebooted anyway.
Upon booting the phone now lacked an OS and gave the "use the verizon repair assistant to reinstall the operating system" message. I tried the software (from a friends s5) on 3 different computers and it wouldn't work on any.
I figured, no problem, I will just reflash to stock with Odin again. Only this time my computer no longer recognizes the phone when I put it into download mode. Ive installed and reinstalled the drivers, changed the order of connecting the cables, and when the phone is booted. Nothing works.
The phone can only boot regularly (but lacks an OS) or go to download mode. Recovery doesn't work. Any ideas? Help would greatly be appreciated as the nearest phone repair center is close to 40 miles away
Tl;dr
Phone doesnt have an OS, can boot to download mode, but isn't recognized by computer. The basic troubleshooting steps haven't worked.
Click to expand...
Click to collapse
Had a similar experience myself. I also tried using the Verizon update/repair assistant for another device and it did not work. I ultimately ended up borrowing a Note 4, installing the upgrade/repair assitant from that phone onto my pc (enable USB autoplay, then choose to install the software that runs when you connect the phone). The software installed from another Note4 was able to repair my phone without issue.

Tepidlake said:
Had a similar experience myself. I also tried using the Verizon update/repair assistant for another device and it did not work. I ultimately ended up borrowing a Note 4, installing the upgrade/repair assitant from that phone onto my pc (enable USB autoplay, then choose to install the software that runs when you connect the phone). The software installed from another Note4 was able to repair my phone without issue.
Click to expand...
Click to collapse
Interesting. Was your computer unable to recognize the phone as well? How did you borrow another Note 4? I have scoured the internet and haven't been able to find the software online. Would you be able to PM it to me? I would greatly appreciate it as I do not have immediate access to another Note.

ODIN can be finicky with USB cables and ports. Try switching cables and make sure that you're on a USB port that comes straight from the PC and not a hub.
Try uninstalling the Samsung USB driver, reboot the computer then reinstall.
I'm not sure why you were using S5 software when Note 4 is so readily available. I'm not sure that I can recommend using the Marshmallow firmware yet in ODIN. I would use the 5.1.1 version and do the full firmware flash.

what i've done.
Hello Urban415, earlier today my phone decided to take a dump as well gave me that same message with the yellow triangle, i had flashed a bad image (file name : N910VVRU2BPA1_StockRestore.tar.md5) which then gave me that problem.
//-=-=
I went onto Sam Mobile's site, created an account(its free! to download the firmware, it's needed.)
I had to download N910VVRU2BOG5 - 5.0.1 (it took me 2 hours to DL off their site :\ due to free account... but whatevs)
In order to bring my phone back to life also the version of Odin i used was 3.10.6..
My phone was rooted as well and was using N910VVRU2BPA1 - 5.1.1
//-=-=
Hope this helps ! My note 4 Model # : Sm-n910v, bought refurb off ebay.
P.S. Excuse my grammar, punctuation, etc, etc. Also! running Windows 7 x64 and Verizon's assistant didn't work for me either. not even on my windows 8.1 laptop =x!

douger1957 said:
ODIN can be finicky with USB cables and ports. Try switching cables and make sure that you're on a USB port that comes straight from the PC and not a hub.
Try uninstalling the Samsung USB driver, reboot the computer then reinstall.
I'm not sure why you were using S5 software when Note 4 is so readily available. I'm not sure that I can recommend using the Marshmallow firmware yet in ODIN. I would use the 5.1.1 version and do the full firmware flash.
Click to expand...
Click to collapse
I have tried with 2 cords, and am not using a hub. I also already uninstalled, rebooted and installed. Anything else?
The S5 software is only the verizon restore assistant because that is the only samsung software I had available to me. I am not using the firmware for that phone on my note. I tried to do the full 5.1.1 firmware flash, but can only do that when my computer recognizes the device.
SolFox84 said:
Hello Urban415, earlier today my phone decided to take a dump as well gave me that same message with the yellow triangle, i had flashed a bad image (file name : N910VVRU2BPA1_StockRestore.tar.md5) which then gave me that problem.
//-=-=
I went onto Sam Mobile's site, created an account(its free! to download the firmware, it's needed.)
I had to download N910VVRU2BOG5 - 5.0.1 (it took me 2 hours to DL off their site :\ due to free account... but whatevs)
In order to bring my phone back to life also the version of Odin i used was 3.10.6..
My phone was rooted as well and was using N910VVRU2BPA1 - 5.1.1
//-=-=
Hope this helps ! My note 4 Model # : Sm-n910v, bought refurb off ebay.
P.S. Excuse my grammar, punctuation, etc, etc. Also! running Windows 7 x64 and Verizon's assistant didn't work for me either. not even on my windows 8.1 laptop =x!
Click to expand...
Click to collapse
Glad that you got your device to work. Thanks for the information about the Verizon assistant software. Guess it's not just me.
My problem isn't the firmware and finding it online. My problem is that my computer now refuses to recognize the phone as a usb device. I have tried the usual recommended troubleshooting steps to no avail. Did you have this problem?

I'm reaching about as far as I can go, but: did you try to do a factory reset in recovery? I had that work in freeing up a connection issue in ADB once.

@Urban415 I was googling and found one guy who had a similar issue as you... It was for an older device. But what he did was uninstalled the assistant. Then plugged in his phone and reinstalled the software and it installed the correct drivers... Also I'm not to android savvy, but just a thought. If your using the s5 assistant wouldn't it have to download a note 4 image for it to recognize it. Maybe that's why it's not working. Because it doesn't have the note 4 drivers and image??? Just a thought
Sent from my SM-N920V using Tapatalk

Just saying this on top of my head but I have seen system images for the system itself and another with the firmware included. Maybe try the one with the firmware included?
Sent from my SM-N910V using Tapatalk

Urban415 said:
Interesting. Was your computer unable to recognize the phone as well? How did you borrow another Note 4? I have scoured the internet and haven't been able to find the software online. Would you be able to PM it to me? I would greatly appreciate it as I do not have immediate access to another Note.
Click to expand...
Click to collapse
Hey, sorry it took so long to get back.
As I recall my phone was not visible to ADB or Kies while it was displaying the Verizon Repair Assistant screen erreor screen. I suspect that in that state, only the Repair Assistant is able to talk to the phone.
I ended up waiting for my wife to get home (she has the same phone as me) and borrowing her phone to install the assistant software. The software recognized my phone, though it took a minute or two, even though Kies couldn't see it. The assistant downloaded the firmware and flashed it. Phone good as new.

Urban415 said:
I have tried with 2 cords, and am not using a hub. I also already uninstalled, rebooted and installed. Anything else?
The S5 software is only the verizon restore assistant because that is the only samsung software I had available to me. I am not using the firmware for that phone on my note. I tried to do the full 5.1.1 firmware flash, but can only do that when my computer recognizes the device.
Glad that you got your device to work. Thanks for the information about the Verizon assistant software. Guess it's not just me.
My problem isn't the firmware and finding it online. My problem is that my computer now refuses to recognize the phone as a usb device. I have tried the usual recommended troubleshooting steps to no avail. Did you have this problem?
Click to expand...
Click to collapse
similar thing happened to me but on my 2013 nexus 7. I had to download and use "Minimal ADB and Fastboot" and manually (using Commands within windows command-line-interface) restore my device while it was in "fastboot mode". prior to that tried using "WUGsNexus Root ToolKit " which help instruct the user; with screenshots on how to uninstall drivers that might conflict with one another with the use of another program named "USBDeview". that didn't work for me unfortunately . but for i cannot for sure say if its a "Maybe my windows need a refresh/clean slate" or I missed a step.

Thank you to everyone that helped me in this thread. After trying several new cables, uninstalling and re-installing drivers, rebooting, and playing around with software compatibility software, my problem has been solved.
I have now reflashing stock firmware, rooted, and backed up the phone. Cheers!