Related
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
your screen doesn't even turn on ?
can you post sompe picture of that?
if you can go to the download mode (VOL DOWN + HOME + POWER) flash the stock rom through odin
bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app
MayB4ck said:
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app
Click to expand...
Click to collapse
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.
mohamed_fattoh said:
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.
Click to expand...
Click to collapse
Hey, it's seem your setting wrong, uncheck reset time.
hinfamous said:
Hey, it's seem your setting wrong, uncheck reset time.
Click to expand...
Click to collapse
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.
mohamed_fattoh said:
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.
Click to expand...
Click to collapse
Hey,
First put your phone into download mode and plug it in to your PC and make sure Odin recognizes it, then add Ancora.ops in the OPS window and the recovery.tar.md5 in the One package window. Also make sure that One package , Auto reboot and Protect OPS are checked, you should uncheck reset time because i've hear that it is causing some problems. Then just click the " Start " button and sit back, you phone will be back on in few minutes.
Just a question : Did you have any android installed when you corrupted the recovery? If yes, after you flashed the recovery the phone will reboot and will boot into android, if not then just flash the rom file if you already have one in your sdcard/internal storage.
Your phone is soft-bricked, don't worry, it will be back and running again :laugh:
I just corrupted my recovery on my phone on purpose to try if the cwm recovery works. And yes, it worked, so it should work on your phone too.
Good luck flashing your recovery, Please answer back because I want to know if this method worked.
Here are the files, just extract the rar file
Finally i have KitKat!!
Finally Solved!!!!!!!!!!!!!!!!!!!!!!!
After long days and hundred tries, it works finally. The story is as below:
1- I failed to download the CWM 6.0.4.5 directly in this state using ODIN,
2- I downloaded the stock (Yes old 2.3.6 ginger bread ROM) using ODIN. However this version keep rebooting and never completed the start up.
3- With ROM installed now (even it's not booting), i tried to download older version of CWM using ODIN (CWM 5.0.4). It was successful!!
4- I tried to do the restore for my old system, but it failed as i did backup with newer version.
5- I flashed Monster ROM (4.2.2), it works wonderful.
6- I downloaded the CWM 6.0.4.5 finally using ODIN.
7- Now i'm using 4.4.2 on my mobile finally.
Advice: Never do a flashing to your mobile when you are not fully concentrating what you are doing. Also, make sure to download the right tool and ROM for your device.
Thank you for everyone who tried to help me.
Muhammad
Hello. I'm not a developer or anything, but I do think that I know some things about technology. I have been trying to fix my GN2, AT&T. I have rooted it, and I did something bad, and now I don't even have access to recovery. Sorry if this question was posted some where else, but trust me. I've searched everywhere to find a way to fix my phone. Oh, and I do have access to download mode. Well, I did saw on a other post that you have to flash a ROM, via Odin to fix this. It did not work. It's my first time using Odin, but I put the .tar file in to the PDA section, and clicked start. (Of course with my phone plugged in to my laptop on download mode). After like 30 minutes, it failed. I tried some other USB ports, but it did not help. Please help me. I don't know what to do.
dorupero said:
Hello. I'm not a developer or anything, but I do think that I know some things about technology. I have been trying to fix my GN2, AT&T. I have rooted it, and I did something bad, and now I don't even have access to recovery. Sorry if this question was posted some where else, but trust me. I've searched everywhere to find a way to fix my phone. Oh, and I do have access to download mode. Well, I did saw on a other post that you have to flash a ROM, via Odin to fix this. It did not work. It's my first time using Odin, but I put the .tar file in to the PDA section, and clicked start. (Of course with my phone plugged in to my laptop on download mode). After like 30 minutes, it failed. I tried some other USB ports, but it did not help. Please help me. I don't know what to do.
Click to expand...
Click to collapse
Have you tried flashing a recovery through Odin?
Sent from my GT-N7105 using XDA Premium 4 mobile app
cnote74 said:
Have you tried flashing a recovery through Odin?
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No. Do I flash it in PDA section, and where should I get it? Thank you so much for responding.
dorupero said:
No. Do I flash it in PDA section, and where should I get it? Thank you so much for responding.
Click to expand...
Click to collapse
Yes flash in pda section if your either i317 or i317m goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt/philz_touch_6.41.6-t0lteatt.tar.md5
Sent from my GT-N7105 using XDA Premium HD app
Thank you so much. I'm going to try it in an hour or so. Probably come back here in about 1 hour and 30 minutes. I'm going to post back if it worked!
dorupero said:
Thank you so much. I'm going to try it in an hour or so. Probably come back here in about 1 hour and 30 minutes. I'm going to post back if it worked!
Click to expand...
Click to collapse
Ok, so I tried it. It successfully flashed the recovery. But when I went into the recovery, (Or tried to) it only showed some home, back, etc. buttons at the bottom of the screen. After that, it went back to the boot loop. Now I'm trying to flash a rom, see what happens. Please tell me if I did something wrong, or any tips would be appreciated.
dorupero said:
Ok, so I tried it. It successfully flashed the recovery. But when I went into the recovery, (Or tried to) it only showed some home, back, etc. buttons at the bottom of the screen. After that, it went back to the boot loop. Now I'm trying to flash a rom, see what happens. Please tell me if I did something wrong, or any tips would be appreciated.
Click to expand...
Click to collapse
Ok. It failed. Is there a way to fix my phone, or it just doesn't work?
So what version of firmware was your phone on before you whorked it up?
Need more if to figure out how to fix it.
If you were on 4.3 you should be able to do this
http://forum.xda-developers.com/showthread.php?t=2618447\
Do post #1 and #2.
You can do Option 2 on Post #3.
dicksteele said:
So what version of firmware was your phone on before you whorked it up?
Need more if to figure out how to fix it.
If you were on 4.3 you should be able to do this
http://forum.xda-developers.com/showthread.php?t=2618447\
Do post #1 and #2.
You can do Option 2 on Post #3.
Click to expand...
Click to collapse
I think it was on 4.4.2. But I'll try the link anyways. Thanks for helping!
dorupero said:
I think it was on 4.4.2. But I'll try the link anyways. Thanks for helping!
Click to expand...
Click to collapse
No worries. Did you take a 4.3 backup before flashing 4.4.2 ?
If not, just ODIN back to 4.1.1 LJ2 like in Post #1. Then flash a custom recovery and you can then flash one of the 4.3 ROMS.
Oh look here's one ...:laugh:
http://forum.xda-developers.com/showthread.php?t=2704375
Flash the 1.75 version then scroll down and do the 2.0 Update.
You can do that after completing Post #2 and following these steps under Option #2 in Post #3
OPTION 2:
You will need to flash a custom recovery. I'm detailing a TeamWin Recovery Project (TWRP) install
Here is an explanation of TWRP and how to use it to flash the [ROM][4.3][Dec-2013] AT&T I317-UCUBMK6/MJ4 *Stock* Rooted
http://www.addictivetips.com/android...devices-guide/
by Haroon Q Raja
Here are other ways to install a custom recovery on your Android phone
http://www.addictivetips.com/mobile/...-phone-device/
Also by Haroon Q Raja
INSTALLING TWRP 2.6.3.1
- Run Odin3 v3.07.exe
Download Link http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip
- Put your Note 2 in Download Mode
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Plug into a RELIABLE usb port and a RELIABLE usb cable (preferably the white Samsung cable) and wait for it to show up in Odin (COM5 or something like that)
- Click the PDA slot in Odin and locate the openrecovery-twrp-2.6.3.1-t0lteatt.img.tar that you downloaded.
The filename that goes into the PDA Slot is openrecovery-twrp-2.6.3.1-t0lteatt.img.tar
MAKE SURE IN THE OPTION AREA ONLY AUTO REBOOT AND F.RESET TIME ARE CHECKED!!!
- Click START and wait. It will complete and reboot.
dicksteele said:
No worries. Did you take a 4.3 backup before flashing 4.4.2 ?
If not, just ODIN back to 4.1.1 LJ2 like in Post #1. Then flash a custom recovery and you can then flash one of the 4.3 ROMS.
Oh look here's one ...:laugh:
http://forum.xda-developers.com/showthread.php?t=2704375
Flash the 1.75 version then scroll down and do the 2.0 Update.
You can do that after completing Post #2 and following these steps under Option #2 in Post #3
OPTION 2:
You will need to flash a custom recovery. I'm detailing a TeamWin Recovery Project (TWRP) install
Here is an explanation of TWRP and how to use it to flash the [ROM][4.3][Dec-2013] AT&T I317-UCUBMK6/MJ4 *Stock* Rooted
http://www.addictivetips.com/android...devices-guide/
by Haroon Q Raja
Here are other ways to install a custom recovery on your Android phone
http://www.addictivetips.com/mobile/...-phone-device/
Also by Haroon Q Raja
INSTALLING TWRP 2.6.3.1
- Run Odin3 v3.07.exe
Download Link http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip
- Put your Note 2 in Download Mode
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Plug into a RELIABLE usb port and a RELIABLE usb cable (preferably the white Samsung cable) and wait for it to show up in Odin (COM5 or something like that)
- Click the PDA slot in Odin and locate the openrecovery-twrp-2.6.3.1-t0lteatt.img.tar that you downloaded.
The filename that goes into the PDA Slot is openrecovery-twrp-2.6.3.1-t0lteatt.img.tar
MAKE SURE IN THE OPTION AREA ONLY AUTO REBOOT AND F.RESET TIME ARE CHECKED!!!
- Click START and wait. It will complete and reboot.
Click to expand...
Click to collapse
Sorry. I was really sick. I'll try it today.
dicksteele said:
No worries. Did you take a 4.3 backup before flashing 4.4.2 ?
If not, just ODIN back to 4.1.1 LJ2 like in Post #1. Then flash a custom recovery and you can then flash one of the 4.3 ROMS.
Oh look here's one ...:laugh:
http://forum.xda-developers.com/showthread.php?t=2704375
Flash the 1.75 version then scroll down and do the 2.0 Update.
You can do that after completing Post #2 and following these steps under Option #2 in Post #3
OPTION 2:
You will need to flash a custom recovery. I'm detailing a TeamWin Recovery Project (TWRP) install
Here is an explanation of TWRP and how to use it to flash the [ROM][4.3][Dec-2013] AT&T I317-UCUBMK6/MJ4 *Stock* Rooted
http://www.addictivetips.com/android...devices-guide/
by Haroon Q Raja
Here are other ways to install a custom recovery on your Android phone
http://www.addictivetips.com/mobile/...-phone-device/
Also by Haroon Q Raja
INSTALLING TWRP 2.6.3.1
- Run Odin3 v3.07.exe
Download Link http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip
- Put your Note 2 in Download Mode
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Plug into a RELIABLE usb port and a RELIABLE usb cable (preferably the white Samsung cable) and wait for it to show up in Odin (COM5 or something like that)
- Click the PDA slot in Odin and locate the openrecovery-twrp-2.6.3.1-t0lteatt.img.tar that you downloaded.
The filename that goes into the PDA Slot is openrecovery-twrp-2.6.3.1-t0lteatt.img.tar
MAKE SURE IN THE OPTION AREA ONLY AUTO REBOOT AND F.RESET TIME ARE CHECKED!!!
- Click START and wait. It will complete and reboot.
Click to expand...
Click to collapse
Thank you very much! I fixed it!
Glad you were able to get it fixed. I had the same issue a few weeks ago. I'll compare your thread to mine to see the differences that got us the same problem...assuming they are the same. My thread about it is here
http://forum.xda-developers.com/showthread.php?t=2753253
Sent from my SGH-I317 using XDA Premium 4 mobile app
dorupero said:
Thank you very much! I fixed it!
Click to expand...
Click to collapse
Most excellent. :good:
I've been having some issues keeping my Tab Pro 8.4 rooted. It doesn't seem to want to stay rooted after rooting.
I installed CM13 on the device about a week ago and its been buggy as hell. I went to install CM13 updates and for that root had been lost again. When I try to reroot (using the guides provided) Odin3 works fine until the tablet tries to re-boot. At that point it gets stuck on the reboot screen and goes no further. I can't flash anything or get the device to get past that re-boot screen.
Any advice?
AustinTech said:
I've been having some issues keeping my Tab Pro 8.4 rooted. It doesn't seem to want to stay rooted after rooting.
I installed CM13 on the device about a week ago and its been buggy as hell. I went to install CM13 updates and for that root had been lost again. When I try to reroot (using the guides provided) Odin3 works fine until the tablet tries to re-boot. At that point it gets stuck on the reboot screen and goes no further. I can't flash anything or get the device to get past that re-boot screen.
Any advice?
Click to expand...
Click to collapse
if you are losing root by upgrading your rom, all you should have to do is flash supersu zip via custom recovery after your rom upgrade
try holding vol - and power till you see a glip in the screen at samsung splash and let go this should take you to your custom recovery.
if that doesn't work you will need
to fix your current issue, you will want to download your stock firmware, push via odin3 (let tab fully boot) then push your custom recovery via odin3.
if your custom recovery worked with vol - and power just start here
then flash your cm13 rom, gapps, then the supersu zip
@AustinTech
get it fixed?
also holding vol+ and power takes you to download mode for odin
toolhas4degrees said:
if you are losing root by upgrading your rom, all you should have to do is flash supersu zip via custom recovery after your rom upgrade
try holding vol - and power till you see a glip in the screen at samsung splash and let go this should take you to your custom recovery.
if that doesn't work you will need
to fix your current issue, you will want to download your stock firmware, push via odin3 (let tab fully boot) then push your custom recovery via odin3.
if your custom recovery worked with vol - and power just start here
then flash your cm13 rom, gapps, then the supersu zip
Click to expand...
Click to collapse
How do I push the stock firmware via odin3? I can get into download mode and then run odin3 but I'm not sure how to push firmware through the program. I'd also need to find the stock firmware.
Sorry if these are basic questions, but I'm not all that familiar with rooting. This is only my second device. And thanks for your help!
AustinTech said:
How do I push the stock firmware via odin3? I can get into download mode and then run odin3 but I'm not sure how to push firmware through the program. I'd also need to find the stock firmware.
Sorry if these are basic questions, but I'm not all that familiar with rooting. This is only my second device. And thanks for your help!
Click to expand...
Click to collapse
go to www.sammobile.com and go to firmware. then type in sm-T*** in the search bar(I believe your device is sm-t320). search then download your firmware based on your country. cellular south is US
open the zip with 7zip or winrar and extract the .tar.md5 file
after you download this go to download mode on your tab
then plug in via usb to pc make sure the com light turns green in odin
then run odin 3
click AP button
select the .tar.md5 file
wait for it to load
then press start and wait for about 20 min until your tablet reboots to the origonal setup
everything will be stock like when you bought it @ this point you will have to redo everything you did when you bought it to regain root and custom recovery
same issue
toolhas4degrees said:
after you download this go to download mode on your tab
then plug in via usb to pc make sure the com light turns green in odin
then run odin 3
click AP button
select the .tar.md5 file
wait for it to load
then press start and wait for about 20 min until your tablet reboots to the origonal setup
everything will be stock like when you bought it @ this point you will have to redo everything you did when you bought it to regain root and custom recovery
Click to expand...
Click to collapse
I'm having the same issue. I'm trying to return to stock, so I use odin, it says PASS but the tablet wont boot past the samsung logo.
protectnor said:
I'm having the same issue. I'm trying to return to stock, so I use odin, it says PASS but the tablet wont boot past the samsung logo.
Click to expand...
Click to collapse
do you have the right firmware for your region?ex the stock region your tab is from and last firmware ver your tab was on. and is auto reboot selected?
toolhas4degrees said:
do you have the right firmware for your region?ex the stock region your tab is from and last firmware ver your tab was on. and is auto reboot selected?
Click to expand...
Click to collapse
Wow I feel like an idiot. It didn't give me an option at first, it sent me to the Trinidad and Tobago link.
toolhas4degrees said:
do you have the right firmware for your region?ex the stock region your tab is from and last firmware ver your tab was on. and is auto reboot selected?
Click to expand...
Click to collapse
I downloaded and flashed the correct firmware, but it still is stuck at the boot screen.
protectnor said:
I downloaded and flashed the correct firmware, but it still is stuck at the boot screen.
Click to expand...
Click to collapse
try going to stock recovery by vol- or + and power and try wiping data and cache
toolhas4degrees said:
try going to stock recovery by vol- or + and power and try wiping data and cache
Click to expand...
Click to collapse
Yes that helped. Thanks!
toolhas4degrees said:
go to www.sammobile.com and go to firmware. then type in sm-T*** in the search bar(I believe your device is sm-t320). search then download your firmware based on your country. cellular south is US
open the zip with 7zip or winrar and extract the .tar.md5 file
after you download this go to download mode on your tab
then plug in via usb to pc make sure the com light turns green in odin
then run odin 3
click AP button
select the .tar.md5 file
wait for it to load
then press start and wait for about 20 min until your tablet reboots to the origonal setup
everything will be stock like when you bought it @ this point you will have to redo everything you did when you bought it to regain root and custom recovery
Click to expand...
Click to collapse
I've downloaded the firmware but what the hell is a .tar.md5 file? I don't see anything like that in my extracted files.
I also don't have a PA button on my odin3
protectnor said:
Wow I feel like an idiot. It didn't give me an option at first, it sent me to the Trinidad and Tobago link.
Click to expand...
Click to collapse
Where did you get you firmware? I tried sammobile.com but the download was took 12 hours and both times gave me corrupt files.
I went to a different site and downloaded what I thought was the correct firmware but since there is no .tar.md5 file in the extracted files I'm thinking no...
Alright, sammobile is downloading a bit faster now so maybe in 2 hours I'll have the correct firmware. I think the site I used earlier was crap.
I educated myself on what a .tar.md5 file is as well and I think I'll be set once I have the firmware.
AustinTech said:
Alright, sammobile is downloading a bit faster now so maybe in 2 hours I'll have the correct firmware. I think the site I used earlier was crap.
I educated myself on what a .tar.md5 file is as well and I think I'll be set once I have the firmware.
Click to expand...
Click to collapse
Yeah sammobile was pretty slow for me too. Just make sure you have your tab!et in download mode before you connect it to the computer.
if you still have problems with sammobile you can download the firmware from the samsung servers with the tool SamFirm
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
also in regards to your first post, CM13 has built in root, you don't need to manually root it, if you are then that's why it's breaking to enable root in cm13 go to settings -> developer options - > root access (then select apps, adb) this setting will persist over all future flashes, to enable developer options go to Settings -> about tablet and tap the build number 5 or 6 times to enable the option.
toolhas4degrees said:
@AustinTech
get it fixed?
also holding vol+ and power takes you to download mode for odin
Click to expand...
Click to collapse
I got it fixed.
Thanks for your help. PM me your PPal address - I want to buy you a beer. Or a pizza. You might be 13 yrs old for all I know.
AustinTech said:
I got it fixed.
Thanks for your help. PM me your PPal address - I want to buy you a beer. Or a pizza. You might be 13 yrs old for all I know.
Click to expand...
Click to collapse
I'm 32 lol, no money needed, just hit the thanks button. glad all is well.
how to fix it. now i can't boot to recovery mode and boot to download mode only. Please hele me step by step, Thanks
Same problem with my AT&T SM-T707. Help!
When you're booting into download mode, just press volume down to restart the tablet. Then you need to be quick: before the boot screen appears you need to press Power + Volume up + Home to boot into recovery. If it does not work the first time, just try again.
Best, maris
First, superbrick was only a term used during an EMMC bug for the S2 and Note.
second, you can use Odin to reflash the stock firmware. As long as you can access Download mode, it's an easy fix.
Nandr0idC0nsumer said:
First, superbrick was only a term used during an EMMC bug for the S2 and Note.
second, you can use Odin to reflash the stock firmware. As long as you can access Download mode, it's an easy fix.
Click to expand...
Click to collapse
I boot to download mode then flash stock rom with odin , but not flash it fail, When my Tab s restart i wait 15-30 min for boot to play. and i can't install other app in my tab, i open playstore for install any app it Hang and reboot
jomogame said:
I boot to download mode then flash stock rom with odin , but not flash it fail, When my Tab s restart i wait 15-30 min for boot to play. and i can't install other app in my tab, i open playstore for install any app it Hang and reboot
Click to expand...
Click to collapse
Wrong firmware for your device.
Now, i can't flash stock firmware, show pit mapping fail , i download pit file for tab s T705 ,and i flash with odin it can't flash, tomorrow i come home and show pic in odin when i use it, show error flash stock rom , and can' flash for root
jomogame said:
Now, i can't flash stock firmware, show pit mapping fail , i download pit file for tab s T705 ,and i flash with odin it can't flash, tomorrow i come home and show pic in odin when i use it, show error flash stock rom , and can' flash for root
Click to expand...
Click to collapse
This may seem too simple, but have you tried using a different USB cable/USB port? NO USB HUBS.
Odin is VERY sensitive to ports/cables.
jomogame said:
Now, i can't flash stock firmware, show pit mapping fail , i download pit file for tab s T705 ,and i flash with odin it can't flash, tomorrow i come home and show pic in odin when i use it, show error flash stock rom , and can' flash for root
Click to expand...
Click to collapse
Flash it with TWRP
Tab S 8.4 demo
ashyx said:
Flash it with TWRP
Click to expand...
Click to collapse
Hi all
Similar problem however mine was a demo device I flashed it with Odin- (pass) and now it wont come out of bootloop.
Is there any way to completely wipe and start again- or have I bricked it completely.
Any help greatly appreciated.
mbsaves said:
Hi all
Similar problem however mine was a demo device I flashed it with Odin- (pass) and now it wont come out of bootloop.
Is there any way to completely wipe and start again- or have I bricked it completely.
Any help greatly appreciated.
Click to expand...
Click to collapse
Factory reset in twrp.
help
ashyx said:
Factory reset in twrp.
Click to expand...
Click to collapse
Hi Ashyx thanks for the reply.
I've managed to twrp and add gapps. Has anyone got a Root programme I could use for the 8.4
. I wanted to use the freedom app.
When i root
http://www.mx7.com/view2/z7yu6imVc2Pyl9e8
when flash stockrom
http://www.mx7.com/view2/z7yuvsRlkjdW5Vnh
download pit file
http://www.mx7.com/view2/z7yuNTKO4vaa4szy
http://www.mx7.com/view2/z7yuZB3jqw46uSWH
how to fix it now iemi don't have , no root , no flash stockrom
anybody hele me, please
I've been scrolling through to find a way to root my tab s couldn't find a post for it. Is it possible to do it or not yet??
eddyo1993 said:
I've been scrolling through to find a way to root my tab s couldn't find a post for it. Is it possible to do it or not yet??
Click to expand...
Click to collapse
flash twrp using odin for t700
https://www.androidfilehost.com/?fid=24499762636001145
then flash this supersu beta using twrp
https://download.chainfire.eu/1017/SuperSU/SR1-SuperSU-v2.79-SR1-20161221223537.zip
edan1979 said:
flash twrp using odin for t700
https://www.androidfilehost.com/?fid=24499762636001145
then flash this supersu beta using twrp
https://download.chainfire.eu/1017/SuperSU/SR1-SuperSU-v2.79-SR1-20161221223537.zip
Click to expand...
Click to collapse
I really appreciate your reply. To flash in odin what option do I choose AP or something else
eddyo1993 said:
I really appreciate your reply. To flash in odin what option do I choose AP or something else
Click to expand...
Click to collapse
Tried it but doesn't seem that TWRP works
eddyo1993 said:
I really appreciate your reply. To flash in odin what option do I choose AP or something else
Click to expand...
Click to collapse
your device need to be in download mode. power off your device. then press home button+volume down+power button simultaneously to enter the download mode. connect your device to your pc and open odin. put twrp in ap section and flash away...
edan1979 said:
flash twrp using odin for t700
https://www.androidfilehost.com/?fid=24499762636001145
then flash this supersu beta using twrp
https://download.chainfire.eu/1017/SuperSU/SR1-SuperSU-v2.79-SR1-20161221223537.zip
Click to expand...
Click to collapse
Please don't direct link, link to the thread, this avoids unecessary questions and allows users to see the instructions and updates.
http://forum.xda-developers.com/showthread.php?t=3074633
edan1979 said:
your device need to be in download mode. power off your device. then press home button+volume down+power button simultaneously to enter the download mode. connect your device to your pc and open odin. put twrp in ap section and flash away...
Click to expand...
Click to collapse
That's what I tried and the weird part is that I go to recovery and it's the original one
eddyo1993 said:
That's what I tried and the weird part is that I go to recovery and it's the original one
Click to expand...
Click to collapse
If you're going to recovery then you're using the wrong button combo.
ashyx said:
If you're going to recovery then you're using the wrong button combo.
Click to expand...
Click to collapse
Sorry I didn't explain good enough. I flash TWRP in Odin choosing the AP button of course after going to download mode. Everything goes good tablet restarts. Try to go to recovery to root it but instead of TWRP it's stock recovery. I Hope that makes sense. Sorry again for not explaining well
eddyo1993 said:
Sorry I didn't explain good enough. I flash TWRP in Odin choosing the AP button of course after going to download mode. Everything goes good tablet restarts. Try to go to recovery to root it but instead of TWRP it's stock recovery. I Hope that makes sense. Sorry again for not explaining well
Click to expand...
Click to collapse
Please refer to the link in post 6. This is precisely why I ask people not to direct link.
You will find your answer in the instructions there.
rooted with these expalnations but I have troubles
Hi, I rooted my Samsung sm-t700 s 8.4 wifi with the XDA CF one, but I have few problems:
1) tablet won't download and install PPP Widget
2) when in Es file manager (Pro) it doesn't recognize root (it happens only to this app, all the other ones get well)
3) tablet doesn't recognize internet key
I have SuperSu (Pro) and BusyBox (Pro) installed...
Perhaps in XDA CF, kernel value to use usb/otg as ethernet is locked? do I can work on build.prop to solve?
Many thanks