[Q] Help with rooting - G3 Q&A, Help & Troubleshooting

I tried to root my LG G3 5.0.1 using this method lg-phones.org/guide-to-root-lg-g3-with-android-5-0-1-lollipop.htm
Root checker is telling me that root is not properly installed.
Before I try anything else, I wanted to check with you guys to make sure I do not screw anything up.

ikarihiokami said:
I tried to root my LG G3 5.0.1 using this method lg-phones.org/guide-to-root-lg-g3-with-android-5-0-1-lollipop.htm
Root checker is telling me that root is not properly installed.
Before I try anything else, I wanted to check with you guys to make sure I do not screw anything up.
Click to expand...
Click to collapse
*update*
On a side note, I ran an app called "root check" and it is stating I am rooted.
Anything I should do?

ikarihiokami said:
*update*
On a side note, I ran an app called "root check" and it is stating I am rooted.
Anything I should do?
Click to expand...
Click to collapse
Well what do you wanna do ?
If the root is done, this thread is done ?
But if you ask what next, it's installing a recovery so you can change ROM ..., I can let you search in the general topic there are a few methods to install recovery, I did it last week, only one worked for me, the app Autorec on GooglePlayStore.
Good luck

Liell said:
Well what do you wanna do ?
If the root is done, this thread is done ?
But if you ask what next, it's installing a recovery so you can change ROM ..., I can let you search in the general topic there are a few methods to install recovery, I did it last week, only one worked for me, the app Autorec on GooglePlayStore.
Good luck
Click to expand...
Click to collapse
I'm a computer savvy person, but this was my first experience with rooting. I just wanted to be sure I did it right. Turning my LG G3 from T-mobile and debranding it. I did get a belly up icon of the little green android, with the word error under him when I tried to remove some bloatware, but a battery pull seems to have fixed that.

Related

How to put cyanogen with visionary?

Hi, I'm sorta a noob with rooting so bare with me. First, what version of visionary should I use to root my device? Will it work after the ota update? What are the chances of visionary bricking my phone or doing anything that would make my phone unusable? Will it put SU on my phone? And now for the main question, how will I get cyanogen on my g2? Thanks for any help!
Sent from my T-Mobile G2 using XDA App
As far as i know visionary is not gonna brick your phone ,in regard to changing your rom you also need to s/off your phone, and to do that you need to setup ADB on your computer i suggest you read this posts first ,you will find all the answers you are after
http://forum.xda-developers.com/showthread.php?t=857390
http://forum.xda-developers.com/showthread.php?t=855764
http://forum.xda-developers.com/showthread.php?t=835777
http://forum.xda-developers.com/showthread.php?t=532719
After you root and s-off your phone you need to setup rom manager so you will get clockworkmod recovery and you can boot in to that and flash a new rom or kernel through there.
and i am not sure about the question you had about the update.
yes you will get su after rooting.
Hwoarang747 said:
Hi, I'm sorta a noob with rooting so bare with me. First, what version of visionary should I use to root my device? Will it work after the ota update? What are the chances of visionary bricking my phone or doing anything that would make my phone unusable? Will it put SU on my phone? And now for the main question, how will I get cyanogen on my g2? Thanks for any help!
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Ok, first there are already many threads on this subject, so next time you should try a search first,
for example: http://forum.xda-developers.com/showthread.php?t=850141
http://forum.xda-developers.com/showthread.php?t=882546
Next the following links will help walk you thru rooting your phone using visionary r14. I have not had any problems with it, many people have rooted this way. If something goes wrong it is usually operator error. This method is for after the OTA. All needed files and links are in the video instructions.
Visionary has bricked phones before when not properly used, the videos show how to use it properly, use all the same settings in the videos.
This is the visionary method, but works perfectly when done correctly..
No adb needed.
Follow the videos to a "T", remove visionary and superusers from you phone if you already have them installed from a previous temp root before following the videos, start fresh, follow the videos starting with temp root then onto perm root then onto flashing a rom. Do everything just like the videos start to finish and you should have no problems.
Temp root first:
http://theunlockr.com/2010/10/20/how-to-root-the-t-mobile-g2-htc-vision-visionary-method/
Then perm root
http://theunlockr.com/2010/11/30/how-to-gain-permanent-root-and-s-off-on-the-t-mobile-g2-htc-vision/
Then flash a rom
http://theunlockr.com/2010/11/30/how-to-load-a-custom-rom-on-the-t-mobile-g2-htc-vision/
Remember don't assume you know how to temp root properly, follow all three videos start to finish and you should have no problems
Also the video "Load a custom rom" will give you a link to flash your first rom. There are a couple of choices to choose from.
Good Luck.
Editlease see post #32 in this thread for a testimony from someone who just followed the videos and rooted his phone.
Thanks soooo much!!! I have another question, how will I be able to get gingerbread after rooting? Or should I wait? Do I need to wipe my phhone? And what if I just want vanilla android with su and cyanogen?
Sent from my T-Mobile G2 using XDA App
Hwoarang747 said:
Thanks soooo much!!! I have another question, how will I be able to get gingerbread after rooting? Or should I wait? Do I need to wipe my phhone? And what if I just want vanilla android with su and cyanogen?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Everyones still waiting on gingerbread, but it looks like Cyanogen is in the lead for releasing it.
Any time you flash a new rom you need to wipe data/cache in recovery. Updates to the same rom a wipe is not needed.
As far as what you want in a rom, my suggestion is to start flashing diffrent roms and give them a try. I thought I didnt like sense but I am currently running a sense rom (Virtuous). So you dont know till you try.
1) Don't use Visionary. People have had brick after brick when using it. Use the rage method.
2) There's a beta version of CM7.0.0 out. The devs are still working out the bugs in it.
Sent from a Western Union telegram.
blackknightavalon said:
1) Don't use Visionary. People have had brick after brick when using it. Use the rage method.
2) There's a beta version of CM7.0.0 out. The devs are still working out the bugs in it.
Sent from a Western Union telegram.
Click to expand...
Click to collapse
1)Show me one brick from someone following the videos I posted and Ill take the links down. Yes a lot of people have bricked using visionary, but thats because they assumed they knew what they were doing when in fact they did not. Visionary causes bricks when not properly used, the videos shows how to use it properly. You must follow all the steps from start to finish including the temp root settings they use in the videos.
2)and yes there is a beta version of gingerbread out CM7 but Cyanogen did not officially release this version, and there are so many bugs in it I hardly think a noob needs to flash CM 7.0.0.
What exactly its the range method?
Sent from my T-Mobile G2 using XDA App
Hwoarang747 said:
What exactly its the range method?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Its Rage method and heres a link to the thread:
http://forum.xda-developers.com/showthread.php?t=834228&highlight=rage
I recommend you read this thread and make informed desicions, if you know how to use ADB, then this is another method. But if you dont the method I posted above is your other option, it doesn't require the use of ADB.
As far as ADB goes this is something I highly recommend learning, but we all know some people just dont get it. It took me a lot of reading and watching videos to understand ADB. Now that I know how to use ADB its pretty simple, but I remember when I first started with rooting ADB was like reading greek. But I really cant stress enough the importance of learning ADB.
Hahah sorry, i was using swype. And yeah, so what do you recomend, cause i really dont wanna brick my phone for its fairly new.
Oh, and another thing, if i root with visionary or rage, that only gives me root access. But if i flash a rom then i will also have cyanogen? And i was reading, since i wanna oc, whats this kernel stuff? Please forgive my noobish ways
Hwoarang747 said:
Hahah sorry, i was using swype. And yeah, so what do you recomend, cause i really dont wanna brick my phone for its fairly new.
Click to expand...
Click to collapse
I used the videos to root my G2, there have been a lot of bricks using Visionary but I have yet to see anyone say they followed the videos to the "T" and it bricked there phone. As for the Rage method, there have been almost no reports of bricks from this method, but I have seen a few bootloops (stuck on the HTC screen). It requires using ADB, so if your ok with ADB use the Rage method, if not, you'll have to weigh the risks based on your own ability. My suggestion, watch the videos, all of them and if its something within your skill range go for it.
Hwoarang747 said:
Oh, and another thing, if i root with visionary or rage, that only gives me root access. But if i flash a rom then i will also have cyanogen? And i was reading, since i wanna oc, whats this kernel stuff? Please forgive my noobish ways
Click to expand...
Click to collapse
Ok, get rooted first then you can worry about kernels, I believe Cyanogen 6.1.1 already comes with an overclocked kernel up to 1.42GHz. So all you have to do is flash CM 6.1.1 his latest release, then down load a cpu controlling app from the market like setcpu(which I use) or cputuner(free) and set the parameters you want your cpu to run at.
Thanks, but a boot loop is fixable right?
Sent from my T-Mobile G2 using XDA App
It usualy is you can boot in to recovery and wipe and flash another kernal or rom. Just have a look at the links that I posted ,you will get all the answers.
Sent from my HTC Vision using XDA App
Hwoarang747 said:
Thanks, but a boot loop is fixable right?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Not always hopefully if this happens you have gotten far enough along to put a recovery on your phone, or sometime you can stock recovery factory reset but if those options arn't there guess what you would have to have AndriodSDk installed on your computer with ADB, but you would have to do everything in fastboot mode which is giving commands from your computer to you phone. So it wouldn't be adb because you have to be booted into Andriod to use it, it would be fastboot and run commands similar to ADB, so for this purpose you would have to know how to use ADB. And even then no guarantees. So if you are looking for a guarantee you wont brick your phone there are none, and I wont give you one, these methods have been proven to work if you follow them exactly, mess up and you have a brick.
I know most people dont have $500+ laying around and I know I dont but for me the rewards far outweighed the risk. I just got a pm from another member that followed the videos and guess what he is rooted, he did it today. I asked him to post in this thread with his success story, so hopefully he will.
Here is a quote from him from my PM "it worked! i got so frustrated with adb, i gave it a shot and success!"
Edit: He just posted success his user name is robot_agenda and his post is #32 in this thread.
wait so what did he give a shot? the gfree method?
Hwoarang747 said:
wait so what did he give a shot? the gfree method?
Click to expand...
Click to collapse
He rooted his phone with visionary following the videos I posted.
and also, have you heard of the issue with visionary where the phone boots into recovery when being charged?
Hwoarang747 said:
and also, have you heard of the issue with visionary where the phone boots into recovery when being charged?
Click to expand...
Click to collapse
That has nothing to do with visionary, thats has to do with ClockworkMod recovery, if your phone is powered off and you plug it in to charge it boots into recovery, if you want root you have to deal with this issue untill they fix the bug in clockworkmod recovery. Also the phone shuts off fine unless its pluged in. Everyone with a htc vision phone who is rooted has this issue. as for me I charge my phone while it on so it doesn't bother me.
heres a link to the problem:
http://forum.xda-developers.com/showthread.php?t=884516

Issues Rooting with Superoneclick

Hi, I have tried rooting about 20 times (not even kidding), and almost every time it gets stuck on step #7. I have installed drivers from LG and have phone in debugging mode. (I tried doomlord, but it won't recognize my Nitro) Does anyone have any advice to help me root my Nitro?
*Mods, feel free to move this to the rooting section, it just wouldn't let me post in there*
Try rooting it the way they root the optimus. That's what I did and it worked fine.
Sent from my LG-P930 using XDA
Did you use the latest SuperOneClick 2.3.3 for rooting your device? I can confirm it works with LG LU6200...
http://www.box.com/s/245a1043a874497c26e7
If this isn't working for you, this should:
http://www.box.com/s/9b369b91e370b60a1544
(its working in ADB mode, make sure your device is in USB debugging mode and connected to your PC)
Good luck!
Use doomlords root
Sent from my LG-P930 using xda premium
Use SuperOneClick v.2.3.2 and not 2.3.3. The latest version don't want to root our Nitro. I can't understand why, but 2.3.2 version root very well.
Sent from my LG-P930 using xda premium
mgoblueno1 said:
Hi, I have tried rooting about 20 times (not even kidding), and almost every time it gets stuck on step #7. I have installed drivers from LG and have phone in debugging mode. (I tried doomlord, but it won't recognize my Nitro) Does anyone have any advice to help me root my Nitro?
*Mods, feel free to move this to the rooting section, it just wouldn't let me post in there*
Click to expand...
Click to collapse
Remove the SD card( or unmount it), i got the same problem here and it thats what worked
What worked for me was installing the Android SDK package.
I was hanging at step #7 as well and after installing the package it went through.
Machzelet said:
Use SuperOneClick v.2.3.2 and not 2.3.3. The latest version don't want to root our Nitro. I can't understand why, but 2.3.2 version root very well.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Im having trouble finding 2.3.2, is there a thread with download links?
Machzelet said:
Use SuperOneClick v.2.3.2 and not 2.3.3. The latest version don't want to root our Nitro. I can't understand why, but 2.3.2 version root very well.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Found one on a random website, and it worked on the 3rd try...thanks!!!
mgoblueno1 said:
Im having trouble finding 2.3.2, is there a thread with download links?
Click to expand...
Click to collapse
Click on a link in my signature and download from my guide. I have an issue to upload the file right here.
problems rooting too!
So this being my first post and all please dont freak. I searched as best I could to find the proper thread to ask this and this seemed like the best option. So here it goes.
I myself tried rooting my phone with Superoneclick and after numerous attempts I failed miserably. So I tried Doomlord's rooting method. I thought I had figured it out because at the end it said "OK!" and it even rebooted my phone but when I tried to DL Titanium backup and busybox it said it could not gain root access. My question is, first would it be safe to attempt the root process again, or if not any ideas on what I might have done wrong and maybe a solution to fix it?
Thanks again
P.S dear Mod if this was the inappropriate place to post this I apologize in advance.
i would download the superuser app and see if tibu finds root
also, there should be no prob running the rooting app again if you choose to, if you are rooted already it should return a *already rooted* message.
So I tried dl superuser and that did nothing. I even did a master reset maybe thinking that I might of changed a setting I want suppose to, and even that didn't work. Like I said I can't get SOC past step 7 and I've tried all the tips I read on here to get past that problem but nothing. Doomlords looks like it worked and it reboots my phone but still nothing. I would really truly appreciate any help!
thanks again
Sent from my LG-P930 using XDA
I tried super one click and dark warlords roto rooter and nothing. I can't root and I want to. Like Herman Munster said...darn darn darn .
I took a photo of my errors so maybe some one could help?
Gino
Sent from my LG-P930 using XDA
I can't get my photo to upload
I cant get my screen shot to upload. I've tried everything. Anyhow, I still can't get my phone rooted. When I rooted my Aria, I used a program on my MAC that rooted it in about 20 seconds. Whatever happened to that?
Gino
thedicarlos said:
I cant get my screen shot to upload. I've tried everything. Anyhow, I still can't get my phone rooted. When I rooted my Aria, I used a program on my MAC that rooted it in about 20 seconds. Whatever happened to that?
Gino
Click to expand...
Click to collapse
Apples and oranges. The two programs used to install custom recovery on the Aria utilize exploits in the HBOOT, which is something only HTC devices have.
What software version do you have on your device? (Look in Settings > About Phone > Software version)
I'm having the same situation. Everything I've read says that if you did the security update without root already then you can't root now. I would love for some one to prove me wrong and show me a way. IM running 2.3.5 v10j with kernel 2.6.35.11.
Thanks
Sent from my LG-P930 using XDA
What I'm running
Hi Drumist! I'm running 2.3.5 v10j with kernel 2.6.35.11.
Gino
thedicarlos said:
Hi Drumist! I'm running 2.3.5 v10j with kernel 2.6.35.11.
Gino
Click to expand...
Click to collapse
You have the recent update installed which makes it impossible to root the device. There are still methods to get the device rooted but it is not simple and basically involves this process: http://forum.xda-developers.com/showthread.php?t=1597488
I would urge you to make sure you know what you're doing before attempting this though.
I had the above problem with not being able to root my phone due to the software version i had. I had to use the "unbricking guide" and after some challenges i was able to restore the phone to stock with root. It is risky, but at this moment im not sure theres any other way to do it, unless someone with programming skills can find an alternate method to go back to a previous version of the software without resetting or unbricking the entire phone.

[Q] [ROOT] Newest/Best way to root my LG Nitro HD (P930)

Hi,
I am new to this site and I came here after reading several (complicated) posts/topics on how to root my LG Nitro HD (P930).
However, I saw there are many methods so I want to know which is the best and the newest method to root my device that I updated to the latest version ICS 4.0.4 (since there is no official Jellybean update on it :crying: ).
Please, if you will give me some links or instructions, please consider I am a newbie in rooting or in the special language you use for doing it.
Thanks for help.
Truepeace said:
Hi,
I am new to this site and I came here after reading several (complicated) posts/topics on how to root my LG Nitro HD (P930).
However, I saw there are many methods so I want to know which is the best and the newest method to root my device that I updated to the latest version ICS 4.0.4 (since there is no official Jellybean update on it :crying: ).
Please, if you will give me some links or instructions, please consider I am a newbie in rooting or in the special language you use for doing it.
Thanks for help.
Click to expand...
Click to collapse
You can root your phone with the update you have right now, but if you uninstall certain apps you will brick your phone.
To root it use TPSparkyRoot - http://forum.xda-developers.com/showthread.php?t=1439429
This will not help you to install custom ROM's.
If you want Jellybean, you'll have to follow the guide in my signature.
Once you've done that you can install any of the many roms posted here in the Android Development section, anything CM10 based is Jellybean.
hereric said:
You can root your phone with the update you have right now, but if you uninstall certain apps you will brick your phone.
To root it use TPSparkyRoot - http://forum.xda-developers.com/showthread.php?t=1439429
This will not help you to install custom ROM's.
If you want Jellybean, you'll have to follow the guide in my signature.
Once you've done that you can install any of the many roms posted here in the Android Development section, anything CM10 based is Jellybean.
Click to expand...
Click to collapse
First, I don't want to upgrade to jellybean using roms or what you call CM10.
For root, this seems complicated, I'll give it a try later on but are you sure it will work because I saw many warnings and remarks (I'll read them carefully later on, now I'm a little bit busy).
And what about this site I saw before for rooting my LG P930 http://www.androidegis.com/how-to/how-to-root-lg-nitro-hd-with-superoneclick-tool/
They seem 2 different methods for rooting.
Thanks for clarification.
Superoneclick would have worked if you hadn't upgraded to ICS. It doesn't work on v20c.
Sent from my LG-P930 using XDA Premium HD app
hereric said:
Superoneclick would have worked if you hadn't upgraded to ICS. It doesn't work on v20c.
Sent from my LG-P930 using XDA Premium HD app
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showthread.php?t=2052321
I can't confirm that it works, but there are success stories there.
This is what I meant: you gave me now two different links, so which one to choose?? I want the most convenient rooting method for my case.
For TPSparkyRoot, I couldn't understand anything in these lines:
"**UPDATE** As jchase stated "If your device "bootloops" don't stress, just follow through with the commands as it "loops" ro.kernel.qemu can do funky stuff." I did notice this in my rooting but just assumed it was normal as this is my first use of adb.
**UPDATE2**
If you get a permissions error on the call
adb shell "echo \"ro.kernel.qemu=1\" > /data/local.prop"
then you may try
adb shell rm /data/local.prop
And then try the echo command again. This may be due to having rooted prior without cleaning up properly. Thanks to Franky_402 for this piece of info.
I have updated the batch file to include this step, it should still be fine for those who are not having the issue as well."
+ they said "does not currently work for the latest ICS update released (v9.4.2.11 on 1/18/2012)" but it should with my 4.0.4 right?
hereric said:
Superoneclick would have worked if you hadn't upgraded to ICS. It doesn't work on v20c.
Sent from my LG-P930 using XDA Premium HD app
Click to expand...
Click to collapse
I asked someone who told me to follow like you the TPSparkyRoot method on this thread http://forum.xda-developers.com/showthread.php?t=2044645 However, I would have tried to do it even if it is a little bit complicated but the problem is that I don't want to reset everything in it and I don't want to lose any data or thing.
I can only wait and see if there will ever be a root that doesn't require to Factory reset the phone.
Thanks anyway.
Try bin4ry on v20c. TPSparkyRoot is based on an old exploit and works on v18f(4.0.3) only.
Thats just for rooting if you want to install CWM, you mush "unbrick" your phone.
http://forum.xda-developers.com/showthread.php?t=2052321&highlight=bin4ry
arda99 said:
Try bin4ry on v20c. TPSparkyRoot is based on an old exploit and works on v18f(4.0.3) only.
Thats just for rooting if you want to install CWM, you mush "unbrick" your phone.
http://forum.xda-developers.com/showthread.php?t=2052321&highlight=bin4ry
Click to expand...
Click to collapse
As I've written before, I just don't want to lose everything I have on the phone since we need to factory reset it.
Truepeace said:
As I've written before, I just don't want to lose everything I have on the phone since we need to factory reset it.
Click to expand...
Click to collapse
Just rooting, you shouldn't lose your data.... following an unbrick guide on the other hand, you will.
You can backup your text messages and your contacts (even though I believe you can sync them with your google account on ICS and you won't lose them), your pictures/videos/voice recordings are saved on your SD card and can be backed up to a computer before doing anything potentially involving data loss. If you root before attempting the custom recovery install you could use Titanium Backup to backup all your apps and their respective data..
lordcheeto03 said:
Just rooting, you shouldn't lose your data.... following an unbrick guide on the other hand, you will.
You can backup your text messages and your contacts (even though I believe you can sync them with your google account on ICS and you won't lose them), your pictures/videos/voice recordings are saved on your SD card and can be backed up to a computer before doing anything potentially involving data loss. If you root before attempting the custom recovery install you could use Titanium Backup to backup all your apps and their respective data..
Click to expand...
Click to collapse
My biggest question is: Will i lose saves like saved games ? Contacts(you told me I could sync them)? My whatsapp conversations???
[EDIT] Yes I can backup for contacts with google account. I can also backup whatsapp conversations. I can also backup the gallery. However I don't know for games' progress.
Sorry for late reply
Ok, thanks for telling me I can backup some things.
So is the bin4ry method better than sparkyroot one?
I created a new thread here http://forum.xda-developers.com/showthread.php?p=41639628
Thanks for help.
Truepeace said:
Ok, thanks for telling me I can backup some things.
So is the bin4ry method better than sparkyroot one?
I created a new thread here http://forum.xda-developers.com/showthread.php?p=41639628
Thanks for help.
Click to expand...
Click to collapse
Without doing some reading on the two, I honestly couldn't tell you which one is best for ics. I haven't used the official ics at all so I've had no need to root it. All the cwm flashable ics roms are already rooted, so I haven't had to root since I performed the unbrick process from gb.
Sent from my LG-P930 using xda premium
Root for LG P930 ON PREPAID 'CONSUMER CELLULAR' network
My friend just bought a prepaid lg p930 phone from consumer cellular, which uses the att network. I was wondering if you can root this phone and install a more efficient rom on the phone. It just came out for this network and so I'm hesitant to try this root method that appears to be for the same model phone but for att and not a prepaid version. Any info on this? Thanks.
LG Nitro HD (P930) 4.0.4 ICS v20c
Hey guys... if you have my device that i listed and you are having problems rooting the phone, it was as simple as turning off my stupid Windows Firewall.
The problem I used to have with Bin4ry (selecting option #1) was it would create a backup, but when it came to restore it would never show up.
If you are receiving an error with a path ending in ric that it cant be located, your device will still root.
Mad love to you developers staying up all night to make stuff like this happen .
StellarRobby said:
Hey guys... if you have my device that i listed and you are having problems rooting the phone, it was as simple as turning off my stupid Windows Firewall.
The problem I used to have with Bin4ry (selecting option #1) was it would create a backup, but when it came to restore it would never show up.
If you are receiving an error with a path ending in ric that it cant be located, your device will still root.
Mad love to you developers staying up all night to make stuff like this happen .
Click to expand...
Click to collapse
Hmmmm.....
Never removed firewall to get it working but installed to root directory ie… c:\
And did not run as administrator ran fine for me until then I got the same error as you did.
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Hmmmm.....
Never removed firewall to get it working but installed to root directory ie… c:\
And did not run as administrator ran fine for me until then I got the same error as you did.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I did root directory, I changed the cable, changed which USB ports I used, took out the SD card.
I also ran cmd as administrator for it to work as well. I don't know if that is what made the difference, because I did everthing the same except my firewall was on and didnt work, the only thing i changed was the firewall.... coincidence, perhaps.. pure noob luck? of course

t0ltespr..? WHAT?

Hello everybody. So, let me tell you my story.
Back a few months ago, I rooted my phone. At start I liked it a lot, then I decided there might be a lot of problems with it, so decided to unroot it. Searched all over XDA, found a way to unroot, unrooted. Now more details. I rooted it with cfm-autoroot-whatever, then in SuperSU checked that I don't want root, and was naive I got rid of root. I was wrong, so searched XDA, found that the only way out was to flash the original OS(/recovery?) of the phone. So, thanks to guys here on XDA, they provided me with a link to the original recovery. I tried updating a rooted phone OTA, first time it failed, same story was with the 2nd try. 3rd try, however, was successful. Well, almost. It started, as I thought, to update, but then the phone wouldn't turn on - all it could do is to go into Download mode. Thankfully enough, I had Odin (thanks to XDA guys for whicever time). I launched Odin and flashed the phone with stock recovery.
Now I have SPH-L900, L900VPUCNE2, Device status is Official, but...
That's why I'm here, finally.
Recently I downloaded CPU-Z for my phone, and when I opened "System" tab, the first thing I see is this:
Model SPH-L900 (t0ltespr)
What? Really? I thought it's for rooted phones, or at least for some not stock recovery. So, does that mean I don't have a stock recovery? Does that mean my phone is rooted even though I didn't root it after flashing with "stock" recovery?
I can find the threads, I think I bookmarked them if you need.
I'll try to explain
Look in cpu-z under system if at the bottom "Root Access: No" then your phone is not rooted.
now if your wondering about "t0ltespr" it is the code name for the SPH-L900 but every dev uses "l900" from what i can see.
NeoGman said:
Look in cpu-z under system if at the bottom "Root Access: No" then your phone is not rooted.
now if your wondering about "t0ltespr" it is the code name for the SPH-L900 but every dev uses "l900" from what i can see.
Click to expand...
Click to collapse
CPU-Z says the phone is not rooted. Really, my question has been answered: why the app says my phone is t0ltespr. Thanks.

Tried something and got an ?interesting? Result

So I was looking at root methods for my Kindle hd and came across " key root master" app. On a whim,and because I can always flash back down to 4.4.4 if it messed up my phone I tried it on the ol'note 4 running 5.0.1
While I knew it wouldn't root I just wanted to see. And after running it and not getting root I decided to look in the system/app folder. Somehow,somewhere it managed to install rootpa.apk into my write protected folder. Maybe this could help find a method,maybe I'm retarded and it has nothing to do with root. Either way, wanted to share.
Jspex said:
So I was looking at root methods for my Kindle hd and came across " key root master" app. On a whim,and because I can always flash back down to 4.4.4 if it messed up my phone I tried it on the ol'note 4 running 5.0.1
While I knew it wouldn't root I just wanted to see. And after running it and not getting root I decided to look in the system/app folder. Somehow,somewhere it managed to install rootpa.apk into my write protected folder. Maybe this could help find a method,maybe I'm retarded and it has nothing to do with root. Either way, wanted to share.
Click to expand...
Click to collapse
Any chance you could post a link to it so everyone who is working on this has the exact version you used if this is anything in the right direction?
http://download.apks.org/?server=14&apkid=com.zhiqupk.root&ver=1.3.6
Not going to lie on this though. It a shady as hell of an app.
This is the xda thread that lead me to look into the app.
http://forum.xda-developers.com/kindle-fire-hd/8-9-inch-help/help-how-root-update-8-5-1-t2936985
Jspex said:
Not going to lie on this though. It a shady as hell of an app.
Click to expand...
Click to collapse
Haha, that's what a quick search brought me. I'll show this to the folks over on the rooting thread if i get the same result :good:
Yeah, I've even looked for a site for the app but have yet come up with one. Like I said, if it screwed up my phone I'd just flash 4.4.4 then go through the 5.0.1 update process again if I had to.
Really was just interested in seeing exactly what the app did, be it root or malware.
Jspex said:
Yeah, I've even looked for a site for the app but have yet come up with one. Like I said, if it screwed up my phone I'd just flash 4.4.4 then go through the 5.0.1 update process again if I had to.
Really was just interested in seeing exactly what the app did, be it root or malware.
Click to expand...
Click to collapse
I might have misread the OP and RootPa.apk has nothing to do with getting root access. This was there from the time you bought the phone, unfortunately.
Oh :/ hadn't seen it before so I associated it with the root app.
Mod lock/deletion requested
Sorry, mate. Good observation, though. :good:

Categories

Resources