Develop Bugs

[Q] Select good RUU for CID VODAP203 french HOX

Hello,
I have a HOX from SFR and I want to return to stock ROM (for remove SFR applications).
I ran RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed but I had Error [131] Customer ID Error
Then I try RUU_ENDEAVOR_U_ICS_40_Vodafone_FR_1.26.163.2_Radio_1.1204.90.13_release_251225_signed but I had Error [140]: Bootloader version error
My bootloader is still locked. Is it possible to do something without unlock boot loader ?
Thanks beforehand for your help.
D:\Android>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.36.0000
(bootloader) version-baseband: 5.1204.164D.30
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.163.27
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: VODAP203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3667mV
(bootloader) devpower: 44
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.829s
Jahwol

Yes you can run a RUU with an locked bootloader, but is must match your main version !
Your RUU HAS not been released yet, so or you are stuck on what you have or unlock it and go to a custom rom
And you say you want to return to stock but the bootloader is still locked, then you must be on stock because you can't change the rom without an unlocked bootloader .... or did you relock it ?

No, really locked, not relocked.
I want to get rid of the layer SFR (phone provider)
Jahwol

If the phone never was unlocked its 100% stock now, so I guess you mean that you want to go on a custom rom, and not go back to stock !
Please get the facts right first and be clear in what you want before we continue

No WiFi after firmware update

Hi all, I seem to be going around in circles on this.
Basically I returned my M8 to stock and it was all working fine however was on an old version of android.
The phone said there was an update which I installed. Ever since the wireless will not turn on.
I have read some posts on here that if I could upgrade it to the next firmware level (2.26.61.1) the wireless would start working.
However you can only update over wifi or the pc link. I have tried to get the pc link to work. The best I got was the connection working and the download started but stayed at 0% so it clearly wasn't working.
I tried to browse the web also but that didn't work either.
I have done three factory reboots not and it will not enable.
Is there another way of tackling this?

Post your fastboot getvar all result without serial & imei no.
We'll see what actually that you need.

ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
We'll see what actually that you need.
Click to expand...
Click to collapse
Thanks
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.21331147A1.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.007s

Your problem is wrong software version that you restored that's why no wifi.
What you need is 4.19.61.2
Install TWRP 2.8.7.0
Restore 4.19.61.2 backup
Install 4.19.61.2 stock recovery
Check OTA
How-to and needed files you can get them here :
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860

ckpv5 said:
Your problem is wrong software version that you restored that's why no wifi.
What you need is 4.19.61.2
Install TWRP 2.8.7.0
Restore 4.19.61.2 backup
Install 4.19.61.2 stock recovery
Check OTA
How-to and needed files you can get them here :
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Click to expand...
Click to collapse
Perfect! Thank you very much

Which RUU file I need to install

I changed the screen on my HTC One M8 and now the phone gets stuck on the HTC One splash screen. Ive treble checked all connections and for damage and cant see anything. I tried Factory reset, but its just gets stuck at Andriod is starting after updating all the apps. My only option seems to be install ruu? Could someone tell me which ruu I should use please?
C:\adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.161.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.163s
C:\adb>

I need the same RUU for different reason.

would this work?
http://forum.xda-developers.com/showpost.php?p=64894064&postcount=849

We need exactly 6.12.161.4, 161 is the most important part

here is a link to 6.12.161.4 but its a file for twrp? can that be used no?
http://forum.xda-developers.com/showpost.php?p=64893769&postcount=842

if u have custom recovery, then yes, that is a nandroid backup which u could restore, since my phone is 100% stock, i cant

jgarkalns said:
if u have custom recovery, then yes, that is a nandroid backup which u could restore, since my phone is 100% stock, i cant
Click to expand...
Click to collapse
mine is 100% stock too

this link is 6.12.161.4 firmware, is this what we need?
https://mega.nz/#!7Z0XBBKa!Yd93Su0asqJcaETQmNspkyX4KhWuPKHkmvJgcAQrnwI

We need RUU, which i couldnt find, you dont need to worry about Firmware, we just have to find RUU for Vodafone UK, even if it's 5.0.2, or 4.4.4, don't care, cause we can use OTA to update if the phone is 100% stock.

this one any good no?
https://www.androidfilehost.com/?fid=95916177934518148

It's 401 for European unlocked, we need vodafone uk161

if I unlock the bootloader, do I still need to have usb debugging enabled in the settings before I can install twrp and an nandriod backup?

i dont think so, u can check forums noob friendly guides

M8 stuck whilst loading recovery mode..

So i accidentally wiped the phone including the internal storage and the OS instead of factory resetting (wasn't paying attention) and tried to re install the android marshmallow OS onto the phone which didn't work..
i managed to flash the twrp by following another forum where someone had the same problem, using the adb process to flash the bootloader etc but now i can't access the recovery at all, it just says entering recovery and remains idle until i get bored of waiting and power off.
Can anyone help me?
i can provide whatever information is necessary for you to help, just need my phone revitalised as i desperately need it for my new job that i should hopefully be starting at the end of the week.
thanks in advance!

@mcg0v
post getvar all after removing serialno and imei
this info will help to know which RUU you need to flash and return your device to stock
any info you can provide is helpful

C:\Users\mcg0v\Desktop\Android\sdk-tools\sdk-tools>getvar all
'getvar' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\mcg0v\Desktop\Android\sdk-tools\sdk-tools>fastboot getvar all
< waiting for any device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4266mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.318s
Hope this helps, I'm really not that good with anything Android related as of yet, but i really need this phone fixed asap.

@mcg0v
you post your issue in the wrong forum
your device is HTC One m7
this forum is for HTC One m8
go to this thread http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
this is for your device ask there some one will guide you

I have quite the same problem (and i have One M8). Can't enter TWRP recovery, bootloop - just shows an endless loading, i can start the phone without that by pushing pwr button/VOL+/VOL- at the same time (fastboot mode - ok). I want to get the stock back, but it's impossible without entering TWRP. Can someone help me please? It seems that i do not understand this thing anymore.
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: removed
(bootloader) imei: removed
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s

andreech95 said:
I have quite the same problem (and i have One M8). Can't enter TWRP recovery, bootloop - just shows an endless loading, i can start the phone without that by pushing pwr button/VOL+/VOL- at the same time (fastboot mode - ok). I want to get the stock back, but it's impossible without entering TWRP. Can someone help me please? It seems that i do not understand this thing anymore.
Click to expand...
Click to collapse
Fastboot erase cache, then flash TWRP again in fastboot. Try TWRP 2.8.1.0, which is an older version (more compatible with your old firmware). Then see if you can boot into recovery.
Or flash signed firmware, to update firmware (yours is ancient) then flash TWRP 2.8.7 and restore a newer stock backup (corresponding to the firmware flashed).

redpoint73 said:
Fastboot erase cache, then flash TWRP again in fastboot. Try TWRP 2.8.1.0, which is an older version (more compatible with your old firmware). Then see if you can boot into recovery.
Or flash signed firmware, to update firmware (yours is ancient) then flash TWRP 2.8.7 and restore a newer stock backup (corresponding to the firmware flashed).
Click to expand...
Click to collapse
Thanks a lot. I've tried the first solution and at least TWRP is now working. I've tried the same thing, but it seems, that it was a wrong version of TWRP

Many apologies, turns out i misread the model and its actually the M7 i have. But im glad that this post is helping others with my original problem and thanks to other members who contributed to helping!
-mcg0v

How to find right RUU

Hi,
In my M8 (Purchased a used device )there is no option to check software update in the About section. When i googled the issue i found that RUU is the best way to fix this issue. The result after run fastboot getvar all is shown below.
C:\HTC\AruwizardMM>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0119
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.30.651.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ******
(bootloader) imei: *****
(bootloader) imei2: Not Support
(bootloader) meid: 99000499043853
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8a0f02ff
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.024s
htc_fastboot finished. total time: 1.045s
Please help me with correct RUU. If i flash it the updation error will be fixed. ?

GOPESHGOPI said:
In my M8 (Purchased a used device )there is no option to check software update in the About section. When i googled the issue i found that RUU is the best way to fix this issue.
Click to expand...
Click to collapse
You have the US Sprint version. US versions can't update OTA unless you are actually connected to that US carrier (in your case Sprint).
So therefore, yes RUU is the best way to install an "official" update.
You can find the Sprint RUUs here: https://forum.xda-developers.com/showthread.php?t=2729173
You can update right to the last version (Marshmallow) 6.20.651.3 without flashing any intermediate versions. You will however need to flash the 6.20.651.3 firmware before 6.20.651.3 RUU (requirement peculiar to US Marshmallow RUUs).
Instruction on how to flash 6.20.651.3 firmware are on the same thread as the RUUs.
Keep in mind that flashing RUU will wipe the phone. So backup any data you want to keep to SD or off the phone (cloud, computer) before doing any of the steps.
GOPESHGOPI said:
Please help me with correct RUU. If i flash it the updation error will be fixed. ?
Click to expand...
Click to collapse
It won't "fix" the issue of not getting software updates OTA. It's not so much an "issue" as it is just a fact of the US versions of the M8.
But it also doesn't matter. The RUU I suggested will put you on the last version released by HTC (Marshmallow). There have been no updates since, and there will be no more updates.

Please help - Not able to do hard reset on HTC one M8 and looking the Correct RRU
redpoint73 said:
You have the US Sprint version. US versions can't update OTA unless you are actually connected to that US carrier (in your case Sprint).
So therefore, yes RUU is the best way to install an "official" update.
You can find the Sprint RUUs here: https://forum.xda-developers.com/showthread.php?t=2729173
You can update right to the last version (Marshmallow) 6.20.651.3 without flashing any intermediate versions. You will however need to flash the 6.20.651.3 firmware before 6.20.651.3 RUU (requirement peculiar to US Marshmallow RUUs).
Instruction on how to flash 6.20.651.3 firmware are on the same thread as the RUUs.
Keep in mind that flashing RUU will wipe the phone. So backup any data you want to keep to SD or off the phone (cloud, computer) before doing any of the steps.
It won't "fix" the issue of not getting software updates OTA. It's not so much an "issue" as it is just a fact of the US versions of the M8.
But it also doesn't matter. The RUU I suggested will put you on the last version released by HTC (Marshmallow). There have been no updates since, and there will be no more updates.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have a HTC one M8 and it is in vicious Boot loop, sometime it go beyond the lock screen foo few minutes but reboot again. I tried to to hard reset, recovery options etc. but it did not delete any data. All the data stays same though i tired multiple times. I installed the adb utility but it does not work when I select the FASTBOOT USB mode. It only works when phone goes beyond the unlock screen for a few minutes but phone boot loop starts.
FAST boot utility works with FASTBOOT USB mode and list the device when use "fastboot devices" command.
Request you to please help to resolve this issue.
ADB - Details
PS C:\adb\platform-tools> adb devices
List of devices attached
PS C:\adb\platform-tools> fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.58.502.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ***************
(bootloader) imei: *******************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Finished. Total time: 0.036s

[email protected] said:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have a HTC one M8 and it is in vicious Boot loop, sometime it go beyond the lock screen foo few minutes but reboot again. I tried to to hard reset, recovery options etc. but it did not delete any data. All the data stays same though i tired multiple times. I installed the adb utility but it does not work when I select the FASTBOOT USB mode. It only works when phone goes beyond the unlock screen for a few minutes but phone boot loop starts.
FAST boot utility works with FASTBOOT USB mode and list the device when use "fastboot devices" command.
Request you to please help to resolve this issue.
ADB - Details
PS C:\adb\platform-tools> adb devices
List of devices attached
PS C:\adb\platform-tools> fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.58.502.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ***************
(bootloader) imei: *******************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Finished. Total time: 0.036s
Click to expand...
Click to collapse
I extracted the correct RRU for this phone from this "RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502.5_combined.exe" but RRU update is not working and getting below message
PS C:\adb\platform-tools> htc_fastboot flash zip RUU.zip
sending 'zip'... (57338 KB) OKAY
sending time = 2.773 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 17(s)