Related
Hy guys i have a G E-975 with korean kit kat from leaked F180K unlocked with freegee and framaroot my phone works perfect boots to recovery normal open and close the same normal my problem is that it doesn't boot to download mode for no reason i installed all the drivers i read all the articles of xda tried many times unistall and reinstall try different computer exactly the same normal boot normal recovery no download mode......please help i want to downgrade to the official but if i can't i will stay to custom for ever.....
soniccm said:
Hy guys i have a G E-975 with korean kit kat from leaked F180K unlocked with freegee and framaroot my phone works perfect boots to recovery normal open and close the same normal my problem is that it doesn't boot to download mode for no reason i installed all the drivers i read all the articles of xda tried many times unistall and reinstall try different computer exactly the same normal boot normal recovery no download mode......please help i want to downgrade to the official but if i can't i will stay to custom for ever.....
Click to expand...
Click to collapse
Stupid question, but are you sure you are doing it right? To enter download mode, first turn the phone off. Then hold both volume buttons, and plug in the USB cable to your computer. Do NOT press the power button. Is this what you are doing?
Also, are you saying you rooted an F180 KitKat with Framaroot?!?! I find that very hard to believe, as it failed for me, and other people also confirmed that it didn't work...
kt-Froggy said:
Stupid question, but are you sure you are doing it right? To enter download mode, first turn the phone off. Then hold both volume buttons, and plug in the USB cable to your computer. Do NOT press the power button. Is this what you are doing?
Also, are you saying you rooted an F180 KitKat with Framaroot?!?! I find that very hard to believe, as it failed for me, and other people also confirmed that it didn't work...
Click to expand...
Click to collapse
sorry dude if i was sure that i made ir right that would be a problem... I have try both with power and volumes +,- and without power deeply black screen nothing more less. My lg is not an F180 is an E975 rooted and cwm recovery with leaked kit kat from the korean F180 i wrote it in first post
Anybody knows how to boot my E 975 into download mode????
any solution i tried from internet didn't work...please help
today tried and hard reset it nothing happens only 2 sort vibrates and nothing more is a protection of the phone or i bricked it any help???
anybody????
The same thing happened to me .. The phone didn't show DOWNLOAD MODE. ... i still flashed the stock kdz by these steps
1.. switch off ur phone
2.. keep the up and down volume buttons pressed and insert the usb cable
3.. open Kdz updater ..
4 .. click read phone information. .and wait for a minute
5.. if it even shows a slight progress seen in the green bar , then you have a go..
Notes
:1.. if the kdz updater even hangs and stops responding while reading ur phone info.. and takes some time.. ur phone is connected in download mode even it shows the slightest progress in the progress bar ( green coloured)
2... if u cant switch off ur phone due to frequent restarts. . just keep the cable connected and the volume buttons pressed while it is restarting
[you can also see ur computer's device mgr for ur phone connection ]
then just flash the Kdz as you do..
I HAVE DONE IT MYSELF several times when my phone didn't show Download mode on the screen.. but cannot guarantee it'll work for you too.. I I'd recommend you to give it a try as it always worked fir me..
BEST IF LUCK
MasterFURQAN said:
The same thing happened to me .. The phone didn't show DOWNLOAD MODE. ... i still flashed the stock kdz by these steps
1.. switch off ur phone
2.. keep the up and down volume buttons pressed and insert the usb cable
3.. open Kdz updater ..
4 .. click read phone information. .and wait for a minute
5.. if it even shows a slight progress seen in the green bar , then you have a go..
Notes
:1.. if the kdz updater even hangs and stops responding while reading ur phone info.. and takes some time.. ur phone is connected in download mode even it shows the slightest progress in the progress bar ( green coloured)
2... if u cant switch off ur phone due to frequent restarts. . just keep the cable connected and the volume buttons pressed while it is restarting
[you can also see ur computer's device mgr for ur phone connection ]
then just flash the Kdz as you do..
I HAVE DONE IT MYSELF several times when my phone didn't show Download mode on the screen.. but cannot guarantee it'll work for you too.. I I'd recommend you to give it a try as it always worked fir me..
BEST IF LUCK
Click to expand...
Click to collapse
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
I already elaborated. . jjust. follow the steps.. i also have the e975 indian..
just reply if you have problems with any steps
---------- Post added at 08:14 AM ---------- Previous post was at 08:10 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
i have flashed it on Win 7 x86 and win 8.1 pro x64
---------- Post added at 08:19 AM ---------- Previous post was at 08:14 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
follow these steps.. :if you have less than 1 gb kdz file
1) Download the latest KDZ from LG's server for your phone via
the app below (kudos to the creator)
http://www.mediafire.com/?cgeb6o5osy2yl9c
2) Make sure you have LG United Drivers already installed,
otherwise download from below
http://www.mediafire.com/?82nt1aeh04aqa3m
3) Download LG KDZ Updater
http://www.mediafire.com/?sj5y073xal03ntw
4) Download the manual adb wipe batch file
http://www.mediafire.com/?ru7erfxsz7p7s3p
5) Put your Optimus G into Download Mode by switching it off,
attaching the usb cable to the phone, holding both the up and
down volume buttons at the same time and lastly inserting the
usb cable into the computer; wait for the drivers to finish
loading if doing it for the first time.
6) Unzip the downloaded updater zip file and run KDZ_FW_
UPD.exe. Use the settings below
Type: 3GQCT
Phone Mode: CS_Emergency
KDZ file: navigate to the folder which you have saved the
downloaded KDZ from the step (1)
Click Launch Software Update and wait for the flash process to
finish
7) Your phone will restart itself when IParam = 90 is displayed
and proceed slower until you see IParam=1 again (which
signals the end of flash, you can safely exit the program then
and remove the cable from the phone). If phone boots up
normally, congrats, skip the steps below and proceed to use the
phone as per normal.
However, this most probably will not be the case for newer
Optimus-es, as the data partition somehow wasn't wiped even
when KDZ-ed, remaining 'dirty', thus causing bootloop or
security infringement.
8) If the phone is stuck at the booting up LG/Telco logo, you
will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx
15secs.
10) Put the phone into recovery mode by holding the volume up
and home button concurrently, then press the power button. Let
go of all the buttons after you see the LG logo on screen for the
2nd time and the screen goes blank thereafter (backlight may
still be on). The phone will kind of reboot and then enters
recovery mode. Repeat the process if you did not get it the first
time.
11) With the phone in Recovery Mode, connect it to the
computer, wait for the drivers to load (if doing it for the first
time), unzip the wipe batch file downloaded earlier from step (4)
, double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully)
boot as per normal.
Hope with this simple guide fellow members will feel safer when
rooting or removing non essential LG wares from their Optimus
---------- Post added at 08:24 AM ---------- Previous post was at 08:19 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
if you have greater thsn 1 gb kdz file
REQUIREMENTS:
MUST HAVE LG DRIVERS
MSXML
.NET FRAMEWORK INSTALLED
1.DOWNLOAD THE ROM/KDZ
2.DOWNLOAD LATEST LG MOBILE SUPPORT TOOL
http://csmg.lgmobile.com:9002/client...2CAppSetup.exe
INSTALL IT WHEN DONE. CLOSE AND END PROCESS ON
TASKMANGER.
3.DOWNLOAD LG R&D TOOL
http://storagecow.eu/index.php?dir=X.../Programs/
4.GO TO DOWNLOAD MODE POW+BOTH VOL BUTTON
PRESSED+CONNECT USB
6) Extract FlashTool and run UpTestEX.exe
7) In R&D Test Tool window,
Select Type = 3GQCT (top left hand side)
PhoneMode = DIAG (top right hand side)
Select kdz file = click to select your LG stock rom *.kdz
Click "Normal web upgrade test" (bottom right hand side)
Then another window will pop up, click "Upgrade Start" button
wait a few seconds, another window "Select Country &
Language" pop up,
=> Country=Republic of Korea
=> Language=English
you can click ok to proceed
8) All Done and wait for finish!
---------- Post added at 08:34 AM ---------- Previous post was at 08:24 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
IMPIRTANT NOTE: DO NOT USE USB 3.0 PORT FOR THIS.. use only usb 2.0 port with a good usb cable as provided with the phone
when i hit update button the app crash for both solutions....
I don't understand my phone works fine but i can't boot to download mode or recovery from the start (with button press) i can boot recovery only with rom manager please somebody which is the combinations for LG E975 for download mode and for recovery because i mess my mind with all this models?????
flash other bootloader in recovery! (z30d mako bootloader but look at updater script and when needed, delete first lines with device info ****...)
2nd Sky said:
flash other bootloader in recovery! (z30d mako bootloader but look at updater script and when needed, delete first lines with device info ****...)
Click to expand...
Click to collapse
hey budy i'm a noob i don't understand what should be needed to delete and replace with what and where is this script make it clearer if that is possible (i don't want to brick my G just want to go back to stock)
ps. so easy to go to custom so hard to go back to stock
hey guys
i bought this lg g3 second hand few days back, it was already rooted running marshmallow with twrp recovery, it was having some lag, so i installed cloudy g3 & took backup of previous rom.
one day decided to restore marshmallow backup, but it was not happing, could just run upto 350mbs after that restart and stuck to lg logo, thats it.
then i thought i should go back to cloudy rom, that also didnt happened,
then i accidentally wiped out everything {system/ internal storage, i was frustrated} now i dont have download mode, adb is not detecting my device.
i can boot in twrp, please tell me what to do, i have downloaded pc suit, sdk platform tools, flashable zip of kdz, dont have otg at moment, so couldnt try it, please help, already lost my htc one to water god.
How are you trying to enter download mode, and you *can* or *can't* enter TWRP?
Did you install the LG phone drivers on your computer?
gnashville said:
How are you trying to enter download mode, and you *can* or *can't* enter TWRP?
Did you install the LG phone drivers on your computer?
Click to expand...
Click to collapse
i can absolutely enter twrp, installed lg drivers, lg pc suit.
i am hitting the up button first then inserting the usb cable,what happens then is i get to see lg logo.
dinu5885 said:
i can absolutely enter twrp, installed lg drivers, lg pc suit.
i am hitting the up button first then inserting the usb cable,what happens then is i get to see lg logo.
Click to expand...
Click to collapse
can u just post me link of lg driver, i tried my best to install driver.
dinu5885 said:
can u just post me link of lg driver, i tried my best to install driver.
Click to expand...
Click to collapse
one more thing, in device manager i get to see, unknown device, windows try to download the driver, but just couldnt accomplished the task.
please someone reply me, i am just newbee.
assuming it to be hard brick, i have tried to do shorting of pins, once only my pc showed that usb device is connected, but nothing happening now, please help.
dinu5885 said:
assuming it to be hard brick, i have tried to do shorting of pins, once only my pc showed that usb device is connected, but nothing happening now, please help.
Click to expand...
Click to collapse
Okay, let's see what we can do. First of all, use this program http://www.revouninstaller.com/revo_uninstaller_free_download.html to uninstall all LG related things and start fresh. Use advanced scan after the uninstall runs and delete all the leftover files, then restart your computer.
Then download the LG United drivers http://oceanhost.eu/x1b0tjlhzw1z and install them, and restart again.
Then, make sure your G3 is completely OFF by pulling out the battery and putting it back in. While it's off, hold down the Volume UP button on your phone and plug the USB cord in from the computer. If your phone doesn't enter download mode, try pulling and inserting the battery again and repeat.
---------- Post added at 04:22 PM ---------- Previous post was at 03:59 PM ----------
If entering download mode works, then download your corresponding kdz from here: http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/D855/
I suggest downloading a KitKat kdz, which will have D85510(x) in the file name, eg. D85510a or D85510f.
Then download LG Flashtool 2014 here: http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
Unpack and run the Flashtool, with settings as
Select Type: CDMA
PhoneMode: DIAG
Select KDZ File: the KDZ you downloaded
Then choose CSE Flash. This will wipe everything and give you a completely fresh flash.
In the next window, only click START. Then choose your country and language and click OK.
Wait until it's 100% complete.
If it bootloops after all this, follow LG's instructions for master reset with hardware buttons here: support.t-mobile.com/docs/DOC-7590#master_reset
---------- Post added at 04:28 PM ---------- Previous post was at 04:22 PM ----------
dinu5885 said:
i can absolutely enter twrp, installed lg drivers, lg pc suit.
i am hitting the up button first then inserting the usb cable,what happens then is i get to see lg logo.
Click to expand...
Click to collapse
Also, make sure you hold UP the whole time it's booting
gnashville said:
Okay, let's see what we can do. First of all, use this program http://www.revouninstaller.com/revo_uninstaller_free_download.html to uninstall all LG related things and start fresh. Use advanced scan after the uninstall runs and delete all the leftover files, then restart your computer.
Then download the LG United drivers http://oceanhost.eu/x1b0tjlhzw1z and install them, and restart again.
Then, make sure your G3 is completely OFF by pulling out the battery and putting it back in. While it's off, hold down the Volume UP button on your phone and plug the USB cord in from the computer. If your phone doesn't enter download mode, try pulling and inserting the battery again and repeat.
---------- Post added at 04:22 PM ---------- Previous post was at 03:59 PM ----------
If entering download mode works, then download your corresponding kdz from here: http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/D855/
I suggest downloading a KitKat kdz, which will have D85510(x) in the file name, eg. D85510a or D85510f.
Then download LG Flashtool 2014 here: http://oceanhost.eu/mipqojfvv9ti/LG_Flash_Tool_2014.zip.html
Unpack and run the Flashtool, with settings as
Select Type: CDMA
PhoneMode: DIAG
Select KDZ File: the KDZ you downloaded
Then choose CSE Flash. This will wipe everything and give you a completely fresh flash.
In the next window, only click START. Then choose your country and language and click OK.
Wait until it's 100% complete.
If it bootloops after all this, follow LG's instructions for master reset with hardware buttons here: support.t-mobile.com/docs/DOC-7590#master_reset
---------- Post added at 04:28 PM ---------- Previous post was at 04:22 PM ----------
Also, make sure you hold UP the whole time it's booting
Click to expand...
Click to collapse
what if there is no download mode, i guess there r more chances of having no download mode, will try your advice for sure.
dinu5885 said:
what if there is no download mode, i guess there r more chances of having no download mode, will try your advice for sure.
Click to expand...
Click to collapse
If none of that works, let me know and we can try using TWRP since you have access. If we can get your phone working again, I'll do my best to help
Hello and sorry for my bad English.
Congratulations for the good forum, it very much helped me with the info ... thanks
Brought me Phone with broken glass Lenovo p1, p1a42, Euro version think. I do not know what they doing with the phone, think it was OTA update issue....
I found many problems in this phone, when it is ON the display works, touch too, but I got Message:Encryption Unsuccessful ... reset does not work, I try in stock recovery remove the wipe,data, there is no success. After that another mode (vol-, power) there again did wipe, nothing again. Phone power on and again got Message: Encryption Unsuccessful ... I know with an Closed-eyes what to do with p780, but P1 is new to me.
Trying to install the new firmware from sdcard as changing his name as Update.zip firmware, but no success ... got error message, I think he did not see the sd card, only internal, But I do not see it too ...cannot put on it update.zip
Another problem is that the PC does not see the phone ... I have 3 pc, 2 win7x64, and 1 xp on it, no one saw the phone, and there is no sound for the new device. I have all the drivers for Qualcom, but the device does not respond. Device manager don't show me phone or new port. So i got power up from Pc or charger, but nothing else. Got logo from Lenovo at start, then almost start to android and again got this Encryption Unsuccessful...bla-bla.
My question: if I have problems with recovery ... can i put on the SD card, like update.zip file and install? Like the old p780? It is possible to get problem from broken main board or chip? Or just i don't get proper drivers? Thanks for help
Have you read through this thread http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
Also try a different Usb cable ,the driver I used is the second one mentioned.
sesos said:
Hello and sorry for my bad English.
Congratulations for the good forum, it very much helped me with the info ... thanks
Brought me Phone with broken glass Lenovo p1, p1a42, Euro version think. I do not know what they doing with the phone, think it was OTA update issue....
I found many problems in this phone, when it is ON the display works, touch too, but I got Message:Encryption Unsuccessful ... reset does not work, I try in stock recovery remove the wipe,data, there is no success. After that another mode (vol-, power) there again did wipe, nothing again. Phone power on and again got Message: Encryption Unsuccessful ... I know with an Closed-eyes what to do with p780, but P1 is new to me.
Trying to install the new firmware from sdcard as changing his name as Update.zip firmware, but no success ... got error message, I think he did not see the sd card, only internal, But I do not see it too ...cannot put on it update.zip
Another problem is that the PC does not see the phone ... I have 3 pc, 2 win7x64, and 1 xp on it, no one saw the phone, and there is no sound for the new device. I have all the drivers for Qualcom, but the device does not respond. Device manager don't show me phone or new port. So i got power up from Pc or charger, but nothing else. Got logo from Lenovo at start, then almost start to android and again got this Encryption Unsuccessful...bla-bla.
My question: if I have problems with recovery ... can i put on the SD card, like update.zip file and install? Like the old p780? It is possible to get problem from broken main board or chip? Or just i don't get proper drivers? Thanks for help
Click to expand...
Click to collapse
Shut down the phone and press volume up and until it connect to the pc
Hi, merry Christmas jAww, just 2 answers... I know how to update drivers and reinstall android roms... For now, nothing helped. No luck with many cable, pc, drivers. No luck with 15 sec vol + , Nothing with Test mode in Windows 7 , phone is not recognize, just when i plug in, got vibration and battery stats % charges.
Trying some update.zip from stock recovery , nothing... fail at 24% or best was 49% and loop at this percents. Why i cant go further? Some is blocked or ... ?
When i go to recovery VOL - there is SD UPDATE, but when i try from there to update, got this message "dev: external sdcard data encypted" If im not wrong , this is internal sd storage, not external , right? This message is show some problem in phone or is normal alert? Maybe soon i will send it to some shop service... Thanks.
sesos said:
Hi, merry Christmas jAww, just 2 answers... I know how to update drivers and reinstall android roms... For now, nothing helped. No luck with many cable, pc, drivers. No luck with 15 sec vol + , Nothing with Test mode in Windows 7 , phone is not recognize, just when i plug in, got vibration and battery stats % charges.
Trying some update.zip from stock recovery , nothing... fail at 24% or best was 49% and loop at this percents. Why i cant go further? Some is blocked or ... ?
When i go to recovery VOL - there is SD UPDATE, but when i try from there to update, got this message "dev: external sdcard data encypted" If im not wrong , this is internal sd storage, not external , right? This message is show some problem in phone or is normal alert? Maybe soon i will send it to some shop service... Thanks.
Click to expand...
Click to collapse
if u connect to the pc do u see something in device manager?
No, already writing issue. Not recognizing, no com port, nothing beep for new device in device.
Starchm said:
if u connect to the pc do u see something in device manager?
Click to expand...
Click to collapse
I have almost same problem
Difference is I can connect to Pc but device manager says Qualcomm HS-USB Diagnostics 9006
when I try to run QFIL
QFIL says "Failed to Switch to Emergency Download mode"
Any suggestions?
erdemdengel said:
I have almost same problem
Difference is I can connect to Pc but device manager says Qualcomm HS-USB Diagnostics 9006
when I try to run QFIL
QFIL says "Failed to Switch to Emergency Download mode"
Any suggestions?
Click to expand...
Click to collapse
Get mini partition wizard and connect to the pc then delete all partition from device
Starchm said:
Get mini partition wizard and connect to the pc then delete all partition from device
Click to expand...
Click to collapse
Yes I did
I still get Qualcomm HS-USB Diagnostics 9006
Should I create a new partition?
---------- Post added at 08:18 PM ---------- Previous post was at 08:10 PM ----------
Upsss now phone is completely gone
No response
erdemdengel said:
Yes I did
I still get Qualcomm HS-USB Diagnostics 9006
Should I create a new partition?
---------- Post added at 08:18 PM ---------- Previous post was at 08:10 PM ----------
Upsss now phone is completely gone
No response
Click to expand...
Click to collapse
Yes u need
---------- Post added at 09:26 PM ---------- Previous post was at 09:18 PM ----------
erdemdengel said:
Yes I did
I still get Qualcomm HS-USB Diagnostics 9006
Should I create a new partition?
---------- Post added at 08:18 PM ---------- Previous post was at 08:10 PM ----------
Upsss now phone is completely gone
No response
Click to expand...
Click to collapse
Yes u need as primary , ext4 and dont give NAME
Starchm said:
Yes u need
---------- Post added at 09:26 PM ---------- Previous post was at 09:18 PM ----------
Yes u need as primary , ext4 and dont give NAME
Click to expand...
Click to collapse
After deletion I lost my phone
device manager says unknown device
erdemdengel said:
After deletion I lost my phone
device manager says unknown device
Click to expand...
Click to collapse
Anything? blue light or smt?
Starchm said:
Yes u need
---------- Post added at 09:26 PM ---------- Previous post was at 09:18 PM ----------
Yes u need as primary , ext4 and dont give NAME
Click to expand...
Click to collapse
MiniTool Partition Wizard cant see my phone anymore
---------- Post added at 08:42 PM ---------- Previous post was at 08:41 PM ----------
Starchm said:
Anything? blue light or smt?
Click to expand...
Click to collapse
Nothing, I pressed power button ~30 sec then device manager says Care Suite Emergency Connectivity
erdemdengel said:
MiniTool Partition Wizard cant see my phone anymore
---------- Post added at 08:42 PM ---------- Previous post was at 08:41 PM ----------
Nothing, I pressed power button ~30 sec then device manager says Care Suite Emergency Connectivity
Click to expand...
Click to collapse
U can try to reinstall your qualcomm drivers.
Starchm said:
U can try to reinstall your qualcomm drivers.
Click to expand...
Click to collapse
Installed but no blue light
no vibrate
how can I connect to pc?
erdemdengel said:
Installed but no blue light
no vibrate
how can I connect to pc?
Click to expand...
Click to collapse
try to press 3 button for 20 sec and after that, then press again for 20 sec and then volume up and then connect, i dont remember it good sorry
Got some update for my problem...still not solved. After new clean wind0ws installation , already my phone is recognize from pc. qualcomm 9008 .
Got some problem for MTP USB recognizing, but sometime is correct. So here is what i got like problems:
When power on, still got "encryption unsuccessful" reset not working, Wipe data , cashe, system, not working, no results after delete all of them. After restart still "encryption unsuccessful"
Got power when charging battery from adapter, and from PC... its ok . Already when im plug in cable to PC in phone got choices to prefer from 3 options: charging only, media devices MTP or Camera. Got choise to USB debugging. Several times try to install many roms, without success, In S152_160126_ROW with QFIL, always got error at 85% with this error : Download Fail:FireHose Fail FireHose Fail . Blue bar not showing, dont know if this is issue...Think my boot-loader is not open. I try to open it, but got error from cmd command. Have Question: If my emmc storage is fried, how to test it? With Lenovo assistant show only 250mb or something like that. Dont see 32gb. Trying to flash "Advanced flash unlocked bootloader & recovery" from M0b theme, but still got error Download Fail:FireHose Fail FireHose Fail. Tonight again will read and testing...
sesos said:
Got some update for my problem...still not solved. After new clean wind0ws installation , already my phone is recognize from pc. qualcomm 9008 .
Got some problem for MTP USB recognizing, but sometime is correct. So here is what i got like problems:
When power on, still got "encryption unsuccessful" reset not working, Wipe data , cashe, system, not working, no results after delete all of them. After restart still "encryption unsuccessful"
Got power when charging battery from adapter, and from PC... its ok . Already when im plug in cable to PC in phone got choices to prefer from 3 options: charging only, media devices MTP or Camera. Got choise to USB debugging. Several times try to install many roms, without success, In S152_160126_ROW with QFIL, always got error at 85% with this error : Download Fail:FireHose Fail FireHose Fail . Blue bar not showing, dont know if this is issue...Think my boot-loader is not open. I try to open it, but got error from cmd command. Have Question: If my emmc storage is fried, how to test it? With Lenovo assistant show only 250mb or something like that. Dont see 32gb. Trying to flash "Advanced flash unlocked bootloader & recovery" from M0b theme, but still got error Download Fail:FireHose Fail FireHose Fail. Tonight again will read and testing...
Click to expand...
Click to collapse
Let me ask, 1. you dont enable oem unlock in dev options ?
2. make a photo from device manager if your phone is connected, is it 9008 or 9006?
Hi, 1. I'm cannot go further when i'm in encryption unsuccessful" Just stuck there. cannot log in to normal android screen and settings.
2. phone is recognized like 9008. tonight i will put some pics.
This is sshots from my p1. Already think my internal storage is damaged...hope I'm wrong. Will try with another flash utility, but don't know for results. Why I got this msg from Qfil program. Download fail,HOSEfail,fail...Anyone know why?
Hi Guys, my device was running very well on Resurrection Remix since a month.
Today I was trying to WIPE and Reinstall the ZIP files. But in TWRP mode, after WIPE I have accidently clicked on POWER OFF option without installing ZIP file.
Since then whenever I press the POWER Button the mobile gets stuck at LENOVO LOGO for few secs and gets turned off and then immediately BLUE LED gets ON ( forever).
Tried with few key combinations but nothing worked. ( Unfortunately Volume Up key is not working)
Can't get into RECOVERY and FASTBOOT MODES since ADB commands r not working.
When I connected to PC, device gets detected as QHSUSB_BULK.
Qualcomm HS-USB Diagnostics 9006(COM4)
SP Flash Tool also didn't work
( YouTube video)
The Device is Bricked, I believe
Plz help me guyzzz
1. get mini partition tool, install it
2. connect your device to pc
3. DELETE ALL PARTITION on your phone
4. format the FULL phone to ext4 format
5. reconnect to the pc
6. u have diag 9008
Starchm said:
1. get mini partition tool, install it
2. connect your device to pc
3. DELETE ALL PARTITION on your phone
4. format the FULL phone to ext4 format
5. reconnect to the pc
6. u have diag 9008
Click to expand...
Click to collapse
Thank u bro
will try and get back :fingers-crossed:
hihaisrik said:
Thank u bro
will try and get back :fingers-crossed:
Click to expand...
Click to collapse
That's only half part of recovery.
Firstly you don't need sp flash tool. You need qpst. Let us know when you reach daig 9008 at com port. Then we will continue next part of recovery stage.
Smarty_009 said:
That's only half part of recovery.
Firstly you don't need sp flash tool. You need qpst. Let us know when you reach daig 9008 at com port. Then we will continue next part of recovery stage.
Click to expand...
Click to collapse
Wt to do if it does not detected as 9008 even after deleting all partitions and format as u said.
Does this Process really helpful ?
hihaisrik said:
Wt to do if it does not detected as 9008 even after deleting all partitions and format as u said.
Does this Process really helpful ?
Click to expand...
Click to collapse
It will.... This is correct step
Smarty_009 said:
It will.... This is correct step
Click to expand...
Click to collapse
Deleted All Partitions and Created a Primary Partition with EXT4. But the process not yet started.. showing Apply Pending Operations.
Plz find the Attached Screenshot.
Starchm said:
1. get mini partition tool, install it
2. connect your device to pc
3. DELETE ALL PARTITION on your phone
4. format the FULL phone to ext4 format
5. reconnect to the pc
6. u have diag 9008
Click to expand...
Click to collapse
Successfully Detected as
HS-USB QDLoader 9008 (COM3)
thanks a lot bro
Now will flash using QFIL..
Bro QFIL is Stuck while Flashing
SCREENSHOT
Smarty_009 said:
It will.... This is correct step
Click to expand...
Click to collapse
Thank u so much bro :good:
My Vibe is Back
Here is how to turn off the phone without waiting for complete discharge...
Hold power for 10 sec and keep holding
The phone will restart showing a black screen for a moment before getting to the lenovo logo.. immediately hold vol down with power
Don't remove your fingers from both buttons
The phone will restart again.. don't remove your fingers..
Now it will turn off
If it restarts again just keep pressing both buttons until it turns off
Now that the phone is off.. connect the phone to pc while holding down vol up..
Now you're in qfil download mode
Use qfil to flash stock rom
Try rooting and installing recovery again
Device isnt available in Minitool
My device isnt shown in minitool. P1c58
hafizq2 said:
My device isnt shown in minitool. P1c58
Click to expand...
Click to collapse
U have hs 9006 or 9008?
Starchm said:
U have hs 9006 or 9008?
Click to expand...
Click to collapse
Actually when I go to device manager it says unknown device while I have installed Qualcomm drivers.
hafizq2 said:
Actually when I go to device manager it says unknown device while I have installed Qualcomm drivers.
Click to expand...
Click to collapse
Try other pc or other drivers. Or poweroff phone and press volume + and until it connect
Starchm said:
Try other pc or other drivers. Or poweroff phone and press volume + and until it connect
Click to expand...
Click to collapse
TRIED OTHER PC IT IS SHOWING IT AS TP LINK ANDROID PHONE
---------- Post added at 07:58 PM ---------- Previous post was at 07:56 PM ----------
hafizq2 said:
TRIED OTHER PC IT IS SHOWING IT AS TP LINK ANDROID PHONE
Click to expand...
Click to collapse
STILL NOT DISCOVERABLE BY MINITOOL.
https://ibb.co/eYYmQ5
hafizq2 said:
TRIED OTHER PC IT IS SHOWING IT AS TP LINK ANDROID PHONE
---------- Post added at 07:58 PM ---------- Previous post was at 07:56 PM ----------
STILL NOT DISCOVERABLE BY MINITOOL.
https://ibb.co/eYYmQ5
Click to expand...
Click to collapse
It is in volume + and then connected ?
starchm said:
it is in volume + and then connected ?
Click to expand...
Click to collapse
no change if i trun it on with volume + button.
---------- Post added at 08:25 PM ---------- Previous post was at 08:07 PM ----------
hafizq2 said:
no change if i trun it on with volume + button.
Click to expand...
Click to collapse
now i have installed another driver which says lenovo adb device
The format is with GPT or MBR?
Thanks for your help, this is what I tried:
I flashed TWRP 3.1.0.0
Flashed AospExtended (No sim or baseband detected)
Rooted
Downloaded the qcn file lenovoP1c58.qcn
Tried with the qcn restore option in QFIL but now it seems there is an issue with the connection. I followed the steps:
adb shell
su
setprop sys.usb.config diag
Click to expand...
Click to collapse
I think I'm almost there but don't know what I'm missing, please help.
Very good,I wanted to do a downgroade of marshmallow to lollipop in A G4 H815 of a friend to root it, since Usus in linux salt told me that it could not flash, I had to flash a SALT-compatible-LAF_flash-in-twrp.zip for recovery since this model is Turkish and the official method did not work either ... well to do the downgroade in LGUP while flasehaba LAF partition (which chance ..) Windows failed and restarted alone. (Windows 7 because the 10 did not recognize the usb in any way ..) Now the mvl is stuck in the logo of the Lg with this error .. when trying in download mode the error also appears .. And it restarts again to the logo so on with this error .. I have been searching online and nothing specific for this error only if you enter download mode, but it does not enter and the pc does not recognize it when I connect it ... we have screwed but well (this happens to me for wanting to do favors ...) if you have any advice u help I would really appreciate it .. I slept 3 hours and something and I look like a zombi at work and this afternoon should return your "wonderful" phone. A greeting
metadeivid said:
Very good,I wanted to do a downgroade of marshmallow to lollipop in A G4 H815 of a friend to root it, since Usus in linux salt told me that it could not flash, I had to flash a SALT-compatible-LAF_flash-in-twrp.zip for recovery since this model is Turkish and the official method did not work either ... well to do the downgroade in LGUP while flasehaba LAF partition (which chance ..) Windows failed and restarted alone. (Windows 7 because the 10 did not recognize the usb in any way ..) Now the mvl is stuck in the logo of the Lg with this error .. when trying in download mode the error also appears .. And it restarts again to the logo so on with this error .. I have been searching online and nothing specific for this error only if you enter download mode, but it does not enter and the pc does not recognize it when I connect it ... we have screwed but well (this happens to me for wanting to do favors ...) if you have any advice u help I would really appreciate it .. I slept 3 hours and something and I look like a zombi at work and this afternoon should return your "wonderful" phone. A greeting
Click to expand...
Click to collapse
Has anyone solution for this? I have same issue.
Hello,
You need to put your phone into Qualcomm Dloader mode again.
On the main board of your phone, there is a way to short-connect some two pins to enable the Qualcomm Dloader
and then you need QFIL to load the recovery files onto the phone to enable the normal android download mode.
---------- Post added at 01:50 AM ---------- Previous post was at 01:48 AM ----------
Ask someone who has a octopus box to fix your phone - They can DO it with USB-OVER-NETWORK