I have Kindle Fire 2
i am triyng connect it to several PC, notebooks, used several cables...
on device manager i see Unknown device with ID "USB\Unknown"
Any drivers not worked... What is it?
Device can recharge with it microusb port... Does it work correctly? What can i do?
erve78 said:
I have Kindle Fire 2
i am triyng connect it to several PC, notebooks, used several cables...
on device manager i see Unknown device with ID "USB\Unknown"
Any drivers not worked... What is it?
Device can recharge with it microusb port... Does it work correctly? What can i do?
Click to expand...
Click to collapse
Have you installed every driver you need?
Try USB 2.0 AND 3.0 Ports.
Is the Kindle Fire in a good condition? (No accidental damage, good envoirment conditions, etc.)
Hannah Stern said:
Have you installed every driver you need?
Try USB 2.0 AND 3.0 Ports.
Is the Kindle Fire in a good condition? (No accidental damage, good envoirment conditions, etc.)
Click to expand...
Click to collapse
usb 2.0/usb 3.0 any drivers. pc and notebooks...
cosmetically condition is good.
my be brocken port?..
Can you boot to your OS? If you can, then does your computer detect it then (if that's not where you were trying to get it detected in the first place)? What OS are you using (both on your device and PC)?
Sent from my iPhone 4 using Tapatalk
phiftyopz said:
Can you boot to your OS? If you can, then does your computer detect it then (if that's not where you were trying to get it detected in the first place)? What OS are you using (both on your device and PC)?
Sent from my iPhone 4 using Tapatalk
Click to expand...
Click to collapse
I can boot and use kindle fire2. Internet,apps, other
But when i connect it to PC i see only "Unknown device". Whithout any ID in properties.
On device is orgonial firmware 10.x.x.x
PC was Mac, Linux, Win 7/8/XP
Problem is not in drivers... Somiething with hardware
Related
I have a kindle fire which wasn't doesn't connect to the computer. I get an error message such as "USB device not recognized". I had rooted the kindle fire and I thought that this problem could have been because of the rom or some kind of kernal error so I installed the stock rom thinking that I will just re-root if however the connection problem still was still there. So now I have kindle fire which is not rooted so doesn't have google market and I want to root it however cannot find a way to get it connected. I have tried 3 different computers and many different cables however still no success. I have also tried reinstalling the drivers, turning off and on the kindle fire with the cable plugged in. Could the port on the kindle fire be broken even though it charges fine. Also, would a factory cable help because I don't want to order it if it doesn't work. What other options do I have? I live in UK and this kindle fire is the 1st gen which was only available in US so cannot send it to amazon for checking.
Your help will be appreciated :good:
Do you have TWRP installed? If so, try connecting it to the computer using the USB mount via TWRP...
I have 3 Kindle Fire tablets that I installed a JB ROM on for some friends, and one will not connect to the computer (except via TWRP). I never did figure out why, but I could copy a ROM and Gapps to it while in TWRP. I set them all up the same, and that one still doesn't connect.
Larry
Sent from my Kindle Fire that thinks it's a Nexus 7
http://forum.xda-developers.com/showthread.php?t=2179748
No root therefore no twrp
larryf said:
Do you have TWRP installed? If so, try connecting it to the computer using the USB mount via TWRP...
I have 3 Kindle Fire tablets that I installed a JB ROM on for some friends, and one will not connect to the computer (except via TWRP). I never did figure out why, but I could copy a ROM and Gapps to it while in TWRP. I set them all up the same, and that one still doesn't connect.
Larry
Sent from my Kindle Fire that thinks it's a Nexus 7
Click to expand...
Click to collapse
Sorry for the late reply but no i do not have twrp as went back to stock as I thought that root cause some problem. So now I'm stuck without root and therefore without play store and I cannot root
soupmagnet said:
http://forum.xda-developers.com/showthread.php?t=2179748
Click to expand...
Click to collapse
Thanks I will try this and get back to you
soupmagnet said:
http://forum.xda-developers.com/showthread.php?t=2179748
Click to expand...
Click to collapse
I tried following the guide however I cannot do the hardware ID bit because in device manager it doesn't show the hardware id. It just shows unknown device
shlokpatel said:
I tried following the guide however I cannot do the hardware ID bit because in device manager it doesn't show the hardware id. It just shows unknown device
Click to expand...
Click to collapse
Plug the device in and manually uninstall the unknown device that shows up in Device Manager. Then Find the directory where the 'android_winusb.inf' is stored (somewhere in your WINDOWS directory), delete it, and start over.
soupmagnet said:
Plug the device in and manually uninstall the unknown device that shows up in Device Manager. Then Find the directory where the 'android_winusb.inf' is stored (somewhere in your WINDOWS directory), delete it, and start over.
Click to expand...
Click to collapse
Tried but still not working
Could it be possible that the port on the kindle fire is broken as I have tried connecting in on many computers and in none it has worked. Also I dont know if this is relevant but when I connect the kindle fire to the computer, the device is connected screen doesn't come up, it just charges and thats it no other change
shlokpatel said:
Tried but still not working
Could it be possible that the port on the kindle fire is broken as I have tried connecting in on many computers and in none it has worked. Also I dont know if this is relevant but when I connect the kindle fire to the computer, the device is connected screen doesn't come up, it just charges and thats it no other change
Click to expand...
Click to collapse
If this is the stock OS, then I would say that is definitely a problem. You may have some system files missing for detecting USB devices plugged in as UMS. Are you able to access any flash drives?
soupmagnet said:
If this is the stock OS, then I would say that is definitely a problem. You may have some system files missing for detecting USB devices plugged in as UMS. Are you able to access any flash drives?
Click to expand...
Click to collapse
Yes, my computer detects my galaxy s2 and other flash drives perfectly. Is there any way of rooting the kindle fire without connecting it to the computer? Because all i want is to have the play store on my device
The new version of KFU seems to have a much more effective driver install. You should try looking into that.
soupmagnet said:
The new version of KFU seems to have a much more effective driver install. You should try looking into that.
Click to expand...
Click to collapse
Still doesn't work Any method of rooting without computer connection ?
EDIT:
Also tried the soupkit on Linuxmint and still no luck
Hi there,
I'm having the same problem with a kindle fire.
- Stuck at logo
- Driver is installed but device is not recognized, so does hardware id.
Hope some one have a solution
bangsnntk said:
Hi there,
I'm having the same problem with a kindle fire.
- Stuck at logo
- Driver is installed but device is not recognized, so does hardware id.
Hope some one have a solution
Click to expand...
Click to collapse
Windows version?
Listed as what in Device manager?
Sent from my XT894 using Tapatalk
I am having the same issue with my KF2. USB Comms disappeared in terms of the device being recognised by XP but strangely fastboot worked and I was able to load CM11 on the device after downloading it via wifi and installing TWRP via fastboot. Still no USB on CM11 but its briefly recognised for a split second when it first boots. Monting the volume via TWRP has not effect either.
Have tried a variety of cables and have tried connecting the Kindle to an XP netbook, downloading fresh drivers etc etc etc.
Any ideas out there?
Shotaway said:
I am having the same issue with my KF2. USB Comms disappeared in terms of the device being recognised by XP but strangely fastboot worked and I was able to load CM11 on the device after downloading it via wifi and installing TWRP via fastboot. Still no USB on CM11 but its briefly recognised for a split second when it first boots. Monting the volume via TWRP has not effect either.
Have tried a variety of cables and have tried connecting the Kindle to an XP netbook, downloading fresh drivers etc etc etc.
Any ideas out there?
Click to expand...
Click to collapse
I Think you would get better help in one of the Kindle Fire 2 / KF HD Q&A forums
Sent from my XT912 using Tapatalk
sd_shadow said:
Windows version?
Listed as what in Device manager?
Sent from my XT894 using Tapatalk
Click to expand...
Click to collapse
Same problem.
Problem:
-stuck @ logo screen
-usb not recognize by computer (windows 7 OS)
I already tried using different sets of cable, reboot both kindle and pc, tried to insert on different usb ports, tried to install adb and adb drivers. still not recognize.
Please help, any suggestion is very much appreciated.
hi guys
how are you ?
hope you fine .
......................................................
i have problems with kfu i cant connect kindle fire to my computer i suppose i have a wrong cable cause i am have Nokia cable and using it to connect it,
i want to install android on it,so i have a wrong cable and i don't know where i can buy from my country .
i am asking if i can root it and install android with wifi file transfer i mean i can transfer files from my computer to kindle with wifi
i need your help
thanks in advance .
Wifi transfer will only work until kfu wants to shut it off to install the bootloader and recovery.
You may want to try to reinstall the drivers and if that doesn't work, try deleting your .android folder
Sent from my YP-G1 using Tapatalk 4 Beta
About the cable!
goldflame09 said:
Wifi transfer will only work until kfu wants to shut it off to install the bootloader and recovery.
You may want to try to reinstall the drivers and if that doesn't work, try deleting your .android folder
Sent from my YP-G1 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks for replying but I don't have the factory cable (I mean the one who comes from amazon) I have a cable from Nokia will it work or it is a problem .
By the way once I connect it to USB I have windows not recognize USB device .
TinyWd said:
Thanks for replying but I don't have the factory cable (I mean the one who comes from amazon) I have a cable from Nokia will it work or it is a problem .
By the way once I connect it to USB I have windows not recognize USB device .
Click to expand...
Click to collapse
Any micro usb should be fine
What does windows say it is?
Might have to look in device manager
Sent from my YP-G1 using Tapatalk 4 Beta
what about smirkit
goldflame09 said:
Any micro usb should be fine
What does windows say it is?
Might have to look in device manager
Sent from my YP-G1 using Tapatalk 4 Beta
Click to expand...
Click to collapse
thanks for replying .
the message shown is common "windows not recognize usb ...." and nothing of the ways worked with me .
so i will ask what about smirkit i heard that i have to root it just to use it so anything can help
TinyWd said:
thanks for replying .
the message shown is common "windows not recognize usb ...." and nothing of the ways worked with me .
so i will ask what about smirkit i heard that i have to root it just to use it so anything can help
Click to expand...
Click to collapse
Look in device manager and see what it shows up as. It will still show up even if windows doesn't recognize it
Sent from my YP-G1 using Tapatalk 4 Beta
device manager
goldflame09 said:
Look in device manager and see what it shows up as. It will still show up even if windows doesn't recognize it
Sent from my YP-G1 using Tapatalk 4 Beta
Click to expand...
Click to collapse
it shows as unknown device not kindle or amazon like i saw in the tutorials to fix it
TinyWd said:
it shows as unknown device not kindle or amazon like i saw in the tutorials to fix it
Click to expand...
Click to collapse
Ok delete your .android folder and see what happens in device manager
Sent from my Amazon Kindle Fire using Tapatalk 4 Beta
!
goldflame09 said:
Ok delete your .android folder and see what happens in device manager
Sent from my Amazon Kindle Fire using Tapatalk 4 Beta
Click to expand...
Click to collapse
same error after deleting it
question:is it true to think the cable is good by that
ps:this is the driver statues from device manager .
"Windows has stopped this device because it has reported problems. (Code 43)'
TinyWd said:
same error after deleting it
question:is it true to think the cable is good by that
ps:this is the driver statues from device manager .
"Windows has stopped this device because it has reported problems. (Code 43)'
Click to expand...
Click to collapse
i managed to delete it and rerun kfu and it worked.
if you can charge via cable, you are set.
reboot, reinstall drivers and then delete your .android folder while kindle plugged in
!!
goldflame09 said:
i managed to delete it and rerun kfu and it worked.
if you can charge via cable, you are set.
reboot, reinstall drivers and then delete your .android folder while kindle plugged in
Click to expand...
Click to collapse
i managed to install drivers but the utility didnt work and the windows showed up that message
btw i have troubles from the usb port in the device (kindle) but i can charge it so the port is working but i have to move the cable when i want to charge even connect to computer so would it be the problem
TinyWd said:
i managed to install drivers but the utility didnt work and the windows showed up that message
btw i have troubles from the usb port in the device (kindle) but i can charge it so the port is working but i have to move the cable when i want to charge even connect to computer so would it be the problem
Click to expand...
Click to collapse
i doubt it due to the fact that windows still recognizes that it is plugged in. have you tried the unbrick utility yet? or booting linux and using soupkit?
How
goldflame09 said:
i doubt it due to the fact that windows still recognizes that it is plugged in. have you tried the unbrick utility yet? or booting linux and using soupkit?
Click to expand...
Click to collapse
Can that work on a Linux on virtual box or VMware because I don't have Ubuntu installed
Run linux on a live usb. Use linux mint mate 13 or ubuntu 12.04 32 bit. It has to have persistent to save data between reboots. Once booted run Soupkit on the live system http://forum.xda-developers.com/showthread.php?t=1850038 . Truth not all usb cables are the same I have two that will not detect fastboot at all.
My rooted KFHD 8.9 is not recognized as a USB device on my computer. I have rebooted both the computer and Kindle several times. I even factory reset the Kindle twice. I have tried to uninstall the drivers, but they still stay on the computer. I don't know what else to do. I am having so many problems with this darn thing.
ironbesterer said:
My rooted KFHD 8.9 is not recognized as a USB device on my computer. I have rebooted both the computer and Kindle several times. I even factory reset the Kindle twice. I have tried to uninstall the drivers, but they still stay on the computer. I don't know what else to do. I am having so many problems with this darn thing.
Click to expand...
Click to collapse
What's your system environment? Have you tried to use another computer?
All of my stuff is on my computer. That wouldn't be practical
Sent from my Galaxy S 4
I added a path to sys32. No luck on that either.
Sent from my Galaxy S 4
ironbesterer said:
I added a path to sys32. No luck on that either.
Sent from my Galaxy S 4
Click to expand...
Click to collapse
Same here. I am on windows 7.
The strange thing is that I can see device via adb interface commands but can't open it as a usb device.
As well I am having some issues with usb port on the device itself. It not always charging from the first time it is connected and I need to find a proper position of the usb cable in the device socket.
Someone with more knowledge please help me.
I can not, for the life of me, get my computer to recognize my watch.
I've tried everything, I've tried installing the driver package another user posted.
I've enable usb debugging in dev settings.
I have adb working correctly but when I type adb devices it's blank.
The only glimmer of hope is I successfully connected my watch via bluetooth debugging and got a debugging dialog on my watch.
I've tried on two computers as well
I really need a detailed guide on how to get my computer to recognize this damn thing
Thanks - A very frustrated novice
Me too. Exact same situation. It was like i read my problem. Also i manage to unlock the device in fastboot mode. Adb in that mode is comunicating with the watch. Please help us. I dont know what to do anymore.
Sent from my SM-N910F using Tapatalk
The watch has no driver compatible with w8. I try pdanet and nO result. Please advice?
Sent from my SM-N910F using Tapatalk
Just managed to get my watch into fastboot mode but I still can't connect or recognize device in adb
Are you trying to connect while the watch is unlocked (screen on, not in ambient mode or off)?
brizey said:
Are you trying to connect while the watch is unlocked (screen on, not in ambient mode or off)?
Click to expand...
Click to collapse
No. The watch is awake
NxWorries said:
No. The watch is awake
Click to expand...
Click to collapse
Does your PC react at all when you plug in the USB cable? (Sorry if this is too basic.) Just wondering if its a bad charging cable.
brizey said:
Does your PC react at all when you plug in the USB cable? (Sorry if this is too basic.) Just wondering if its a bad charging cable.
Click to expand...
Click to collapse
Yes, my pc makes a noise and in my device manager the watch is identified as a Marshall London device. I think that's due to one of the many drivers I attempted to install. Thanks for your help by the way
NxWorries said:
Yes, my pc makes a noise and in my device manager the watch is identified as a Marshall London device. I think that's due to one of the many drivers I attempted to install. Thanks for your help by the way
Click to expand...
Click to collapse
Nevermind. It's identified as HUAWEI watch under the other devices section. I can't find a compatible driver
https://drive.google.com/open?id=0B6OEA3csBCnQU2dZSXVMTm9STDA
NxWorries said:
Nevermind. It's identified as HUAWEI watch under the other devices section. I can't find a compatible driver
https://drive.google.com/open?id=0B6OEA3csBCnQU2dZSXVMTm9STDA
Click to expand...
Click to collapse
Download PDANet ADB Drivers: http://www.topnotchtablets.com/installADBdriver
connect to computer. (Using the magnetic USB charging cable)
I manage to install manualy usb driver from sdk directory. You have to update driver with those drivers.
https://youtu.be/RDA8PpPSFuk
https://youtu.be/FZu4GDf963M
Sent from my SM-N910F using Tapatalk
The watch was only recognize the first time.
On my case the phone are not recognized and the error message indicate:
Windows has stopped this device because it has reported problems. (Code 43)
A request for the USB device descriptor failed.
I must say that i´ve also that problem on pc and notebook running windows 10. usb port plugged in an nothing happen, no device recognition or something else. tried different usb ports, different machines, nothing...
Any ideas?
I have some problem how to solve??Any one have solve?
Thx
I've posted this many times in the various Huawei forums and it has worked for everyone so far.
First, remove all other drivers using USBDeview.
http://www.nirsoft.net/utils/usb_devices_view.html
Then use this tutorial to manually install the Google USB driver.
http://visualgdb.com/KB/usbdebug-manual/
Good luck!
edit - here is a fool proof method.
https://forum.xda-developers.com/an.../live-iso-adb-fastboot-driver-issues-t3526755
SirRobin78 said:
I must say that i´ve also that problem on pc and notebook running windows 10. usb port plugged in an nothing happen, no device recognition or something else. tried different usb ports, different machines, nothing...
Any ideas?
Click to expand...
Click to collapse
I know it's been a long time but were you able to find a solution ? I'm having the exact same problem.
Hello, whenever I plug in my Nexus 5X to my computer, it says that the USB device is not working properly. When I check my installed USB drivers it shows:
USB Device Not Recognized (Device Descriptor Request Failed)
Can someone help me? I would like to do USB Debugging
rpalmon said:
Hello, whenever I plug in my Nexus 5X to my computer, it says that the USB device is not working properly. When I check my installed USB drivers it shows:
USB Device Not Recognized (Device Descriptor Request Failed)
Can someone help me? I would like to do USB Debugging
Click to expand...
Click to collapse
If you are on win10 the builtin drivers and drivers you ask win10 to download are all you need. If you are on older platform like winxp or vista, try these:
http://forum.xda-developers.com/nexus-5x/general/psa-fix-adb-doesnt-winxp-t3403955
sfhub said:
If you are on win10 the builtin drivers and drivers you ask win10 to download are all you need. If you are on older platform like winxp or vista, try these:
http://forum.xda-developers.com/nexus-5x/general/psa-fix-adb-doesnt-winxp-t3403955
Click to expand...
Click to collapse
It was working before but now it says USB Device Not Recognized (Device Descriptor Request Failed) when I check the installed USB Drivers.
rpalmon said:
It was working before but now it says USB Device Not Recognized (Device Descriptor Request Failed) when I check the installed USB Drivers.
Click to expand...
Click to collapse
Try different cable and/or different port.
rpalmon said:
It was working before but now it says USB Device Not Recognized (Device Descriptor Request Failed) when I check the installed USB Drivers.
Click to expand...
Click to collapse
Is there a driver that I could install to fix it?
rpalmon said:
Is there a driver that I could install to fix it?
Click to expand...
Click to collapse
The error you listed doesn't sound like a software problem. It sounds like there is a USB communication issue.
Even with no drivers installed, your PC should be able to get the USB device descriptor, otherwise it couldn't figure out which driver to use.
sfhub said:
The error you listed doesn't sound like a software problem. It sounds like there is a USB communication issue.
Even with no drivers installed, your PC should be able to get the USB device descriptor, otherwise it couldn't figure out which driver to use.
Click to expand...
Click to collapse
The thing is that I have other Android devices and when I plug them in USB debugging works fine. I think that it has to do with the Android N update because ever since I updated it never worked.
rpalmon said:
The thing is that I have other Android devices and when I plug them in USB debugging works fine. I think that it has to do with the Android N update because ever since I updated it never worked.
Click to expand...
Click to collapse
It's possible or it could be coincidental. My Android N update didn't affect my USB operations or USB ID at all though.
It could also be something went bad with your USB port on the phone.
See if there is any lint inside the port using bright pencil flashlight.
Also try different USB A to C cable if that is what you are using, sometimes cables go bad.
sfhub said:
It's possible or it could be coincidental. My Android N update didn't affect my USB operations or USB ID at all though.
It could also be something went bad with your USB port on the phone.
See if there is any lint inside the port using bright pencil flashlight.
Also try different USB A to C cable if that is what you are using, sometimes cables go bad.
Click to expand...
Click to collapse
what do you mean by lint?
sfhub said:
It's possible or it could be coincidental. My Android N update didn't affect my USB operations or USB ID at all though.
It could also be something went bad with your USB port on the phone.
See if there is any lint inside the port using bright pencil flashlight.
Also try different USB A to C cable if that is what you are using, sometimes cables go bad.
Click to expand...
Click to collapse
I also tried factory resetting the phone and that didn't work.
rpalmon said:
what do you mean by lint?
Click to expand...
Click to collapse
Lint/dust. Sometimes it gets into the port and interferes with the connections.
Airblow sometimes helps.
Just a shot in the dark.