No settings button at quick circle overview! - G3 Q&A, Help & Troubleshooting

Hey guys i just got my quick circle case for my cloudy 2.3 G3.
I dont want to install xposed because quickcircle wont work then.
so i found a thread with some facewatches so i can flash.
but when i flashed one the settings button that existed before flash is now gone and i cant choose any facewatch
pic attached below.
Thanks!
PS. I tried to dirty flash the rom again but no luck the problem still exists.

i have this problem as well with cloudyg3 2.4
where is my settings
i wanna change some watch face

Yes i am having the same issue with cloudyg3 rom. Any solution is highly appriciated

Related

[Q] Hide black bar

Hello,i am sorry if i made this thread for nothig,but i've searched the forum for a way to hide the black bar that is down on the screen (the black bar with three dots on it).This is my first Android phone i've had and honestly i'm kinda noob in this Android "world".It's not verry bothering except in games (in every game it shows and i can't do anything to hide it) and i have downloaded an app called MiLocker,but every lockscreen that i setup the black bar keeps showing down on my screen.I've seen on the forum that many people recomend other lauchers (GoEx,etc),i want to know if there is a way to disable this without changing my laucher because i realy like it.
PS:My phone is rooted if anyone has a solution to hide the bar but i have to do some changes that require root acces.
PS:Also,why are the lockscreens so laggy on HTC One X?
Thank you verry much and sorry if the questions above were asked before.
EDIT:Sorry guys,found the answer after all,you can delete the post.
Could you give us your solution?
Sent from my HTC One X using xda premium
You will need an deoxed ROM in order to use this.I think i will put the Android Revolution HD (ARHD) on my One X.The only problem i have is that my firmware is 1.26 and as far as i understood for the new ARHD 3.1 i need to put the 1.28.The problem is that i've unlocked with htcdev my bootloader and now the cin is none so i don't have any idea how to update that.I've seen a guy who tryed to put the new ARHD on his 1.26 but claims that he had problems with it and after that he camed back to the stock ROM.Also i have S-ON so i will have to flash my boot.img manualy...i will probably wait for an S-OFF and then update everything.
http://forum.xda-developers.com/showpost.php?p=24723389&postcount=142
EDIT: For stock ROM
http://forum.xda-developers.com/showpost.php?p=25063642&postcount=279

[Q] need help with ROM Toolbox pro and changing battery icons

Hey guys,
I really need help on changing the battery icon on my galaxy s3. I jusr hate how it looks. so I downloaded a program called ROM Toolbox Pro (im sure you've heard of it), installed it and downloaded the icon pack (Circular Colourful). I installed it and none of my battery icons changed. I restarted SystemUI.apk and nothing happened. I did a reboot and nothing happened. keep in mind that iam rooted and have custom recovery. i asked a question/ made a post on the bootloop that I encountered when changing SystemUI.apk, but I fixed it. so could someone help me solve this problem?
Thanks
Nevermind, fixed: just installed previous version.
Sent from my SGH-I747M
Same Problem
Hi I was just curious what you meant by previous version. I am having the same problem. I'm rooted, running a custom ROM and I was able to change my boot animation fine with Rom Toolbox Pro, but it's not changing the Battery Icons I chose.
theadamt said:
Hi I was just curious what you meant by previous version. I am having the same problem. I'm rooted, running a custom ROM and I was able to change my boot animation fine with Rom Toolbox Pro, but it's not changing the Battery Icons I chose.
Click to expand...
Click to collapse
As an option, this a very cool statusbar icon creator you use from a PC to make a flashable zip. Some of the settings need to be tweaked to assign the proper names to the pngs. for example. the signal output has to be renamed tw_stat_sys_6_level_signal_ so it replaces the proper files on our phone. I also found success using a working, flashable zip that replaces the battery icons and just replacing the images in that file with the ones i made and rezipping. Its very easy, but seems more geared toward international S3's, so thats why it needs a couple tweaks. The options for colors and styles is pretty impressive!
http://forum.xda-developers.com/showthread.php?t=1918500

[Q] INFAMOUS S4 v2.5 Transparent Statusbar and Notifications IU ERROR

Hi yes i enjoy INFAMOUS S4 but i came a cross a problem. v2.4 i was able to install 100%Transparent Statusbar and Notifications but on v2.5 theres a IU error now im not stupid i know because of the new added ROM CONTROL its giving me an error is there a solution or update to that problem
Hmm i believe those options are already in the rom control....why aren't you using those?
i did no luck see the mods make any wallpaper with the status bar transparent and the ROMmod only with the stock wallpaper, that's why i flash it and well the v.2.4 i didn't had any issues but if just a request or a question if is possible to make it work..
nemesisgx said:
Hi yes i enjoy INFAMOUS S4 but i came a cross a problem. v2.4 i was able to install 100%Transparent Statusbar and Notifications but on v2.5 theres a IU error now im not stupid i know because of the new added ROM CONTROL its giving me an error is there a solution or update to that problem
Click to expand...
Click to collapse
Try setting your status bar color to black.
Set the status color black as mention above, and set the transparency...will get transparency on any wall paper that way
i will thanks for the support ill let you know if that works if not ill roll back to V2.4 until i figure some thing out tanks
SO i try and no luck i flash and wipe 3 times now i come to the conclusion because of the mod in the rom you cant flash others mods it work before but ROMs have to grow no shame on that still move it .. thanks
perhaps you are getting a bad download, i have experienced bad md5 checksums on previous downloads.
Get an md5 checker program. the md5 is given on the download site.
well yes you were right sir i re-downloaded it and now it works fine actually i dirty flash it over the old one working fine now no problems so far i hope
actually can you ask Mr infamous if he going to release a App2SD on the rom or is he going to update the ROM to 4.3 i could ask but the dam website wont let me. IT WOULD HELP THANKS

[MOD][23 OCT]Pulldown Notification Torch With Simplistic Battery % Mod [3.57.401.500]

EDIT: I've re-written this entire post because it got a bit messy and I don't think I explained things very well! Plus I messed up and uploaded the file as an APK and not a ZIP!
I've re-wiped my phone completely because I managed to get it into a muddle! I fully flashed ARHD30.0 & InsertCoin 3.0.5 and I was still getting gapps FC messages and apparently it's a known / common thing so I wiped the SD and everything, allowed Sense to have G+ access and now it's playing nice again! This was without even flashing my MOD! So something went squiffy!
Anyway:
This MOD has been tested on InsertCoin 3.0.5 which is based on the 3.57.401.500 ROM so it may work on other ROMs as well but I can't be certain. I did try this on ARHD30.0 and for some reason when I pressed the torch option it didn't work. Nothing seemed to happen. It could be because /system isn't mounted as RW or the flashlight APK is different or there's a file deny permission to the location where it writes the LED brightness to, I'm not sure yet but will see what it is if I get chance. It works fine on InsertCoin 3.0.5.
All you need to do is download the zip, flash it in recovery and then reboot your phone back into Sense 5.5 for the torch icon to appear and work.
When you pull down the notification tab there's a torch icon next to the quick settings button. You can tap this up to 3 times to increase the flash brightness levels. Pressing a 4th time will turn the torch off again.
I preferred this method because it doesn't just call the HTC Torch application, it actually does control the torch on and off.
I usually run ViperOne but I'm waiting for their sense 5.5 update so decided to throw this together as I like a lockscreen torch type thing!
Usual disclaimer applies, I'm not responsible for boot-looping your phone so please flash at your own risk and make a nandroid before you do!
Please remember to thank me if you think this is any good / you use it! I may change the icon / spacing as I'm not 100% sure I like it at the moment.
Cheers,
Nick
EDIT: MD5 Should be 05CB646CB469DCB0141E416B63340F30
I can confirm that the MD5 for SystemUI.apk on InsertCoin 3.0.5 is a match to 3.0.4 so this MOD should work fine on the newest version also. Feedback is appreciated to let me know if it worked alright for you or not!?
Any suggestions or different torch icons / logos are appreciated too if anyone has a better icon to use!
nickabbott said:
I can confirm that the MD5 for SystemUI.apk on InsertCoin 3.0.5 is a match to 3.0.4 so this MOD should work fine on the newest version also. Feedback is appreciated to let me know if it worked alright for you or not!?
Any suggestions or different torch icons / logos are appreciated too if anyone has a better icon to use!
Click to expand...
Click to collapse
tried to flash this with the latest version of ARHD GE edition and got system ui FC over and over..
agalvin13 said:
tried to flash this with the latest version of ARHD GE edition and got system ui FC over and over..
Click to expand...
Click to collapse
Sorry to hear it didn't work. It must only work on pure Sense 5.5 based ROMs and not AOSP / Hybrid type ones. Thanks for trying and hopefully you have a backup to go back to?
If not you can copy out the SystemUI.apk from your ARHD GE ROM and put it in the zip file from this thread (overwrite mine that's in there) and re-flash and you will have your old one back.
works great, thanks a lot!
Gesendet von meinem HTC One mit Tapatalk
I flashed this in stock deodex sense 5.5 Rom .install but not working
Sent from my HTC One using XDA Premium 4 mobile app
Not sure if anyone is bothered for this but I've updated the style shown in the screenshots in this post. I can provide APK's for ROMs with this mod included and I know why it didn't work on ARHD and possibly stock ROMs etc. You need the following to be run in an init.d script:
chmod 666 /sys/class/leds/flashlight/brightness
I knew it was a permission issue somewhere but didn't look into it till it didn't work on Viper so I wanted to fix it!
Anyway, if anyone is interested post here, and I'll see what I can do. If you want it with the ROMs battery percentage or mine then let me know!

I need a power menu mod

I'm currently using mehdi 2.9 rom also cover lock screen my prob is i have a couple of users n theres noway to switch users without having to go bk to stock lock screen is there a xposed module or anything else tht could put users on my power menu like other roms such as pacman rom thanks in advance

Categories

Resources