[q] need modem file -->nb1 for Grand-i9082 - Galaxy Grand Duos i9082 Q&A, Help & Troubleshootin

I want modem file for Grand-i9082 (Indian variant)
i.e I want files for::
PDA : I9082XXUBNG3
CSC : I9082ODDBNG1

chaituxda said:
I want modem file for Grand-i9082 (Indian variant)
i.e I want files for::
PDA : I9082XXUBNG3
CSC : I9082ODDBNG1
Click to expand...
Click to collapse
http://ul.to/d0cm8ikc
Or
http://rapidgator.net/file/8378ada88bfb9652975ecb2f75ff23c9

Thanku !!!
Can I flash this modem file via recovery /odin?

chaituxda said:
Thanku !!!
Can I flash this modem file via recovery /odin?
Click to expand...
Click to collapse
You can flash it via Mobile Odin or flash fire
Or Odin ( PC version ) I recommend the last/first one because flash fire isn't stable yet .. And PC Odin is the Most used way so its recommended
---------- Post added at 07:03 AM ---------- Previous post was at 07:02 AM ----------
You can't flash it via recovery

Sir i have asked modem file !!!!
i.e u can check this thread ::http://forum.xda-developers.com/showthread.php?t=2496989 once(but theres no modem file for nb1 :crying: but i want it)
The file u suggested is 970 mb,but usually modem file size will be around 17-18 mb.
I think u have suggested the ROM!!
**PS:First link doesnt work(links which u posted)**

chaituxda said:
Sir i have asked modem file !!!!
i.e u can check this thread ::http://forum.xda-developers.com/showthread.php?t=2496989 once(but theres no modem file for nb1 :crying: but i want it)
The file u suggested is 970 mb,but usually modem file size will be around 17-18 mb.
I think u have suggested the ROM!!
**PS:First link doesnt work(links which u posted)**
Click to expand...
Click to collapse
My Bad , That was the whole Stock NB1 ROM i'll look and try to get it
---------- Post added at 10:52 AM ---------- Previous post was at 10:47 AM ----------
Do you have Indian stock ROM ? If you do you can Untar it and get the Modem from it

Thank you!!
Yes Sir i have the indian NB1 rom .
Can u tell me the procedure "HOW TO UNTAR modem file from it" !!!

chaituxda said:
Thank you!!
Yes Sir i have the indian NB1 rom .
Can u tell me the procedure "HOW TO UNTAR modem file from it" !!!
Click to expand...
Click to collapse
you will need Winrar or 7Zip to complete this
firstly make a copy from the stock ROM
rename the copy and remove the .md5 from it
then opne it with winrar/7zip
Extract BcmCP.img
---------- You extracted the Modem successfully ------------
now its time to make it odin flashable tar
you will need a tool that convert files to tar i use tar-Tool_Odin3-v3.07 ( download it from attachments )
Extract the tar tool
then put the BcmCP.img in the Converter folder
and run ImgToTar.MD5.bat
after 5/3 Minutes you will find a .tar/.tar.md5 in the folder
--------- You converted it successfully ------------
to flash it download odin from attactments
put the Modem .tar in PDA/ AP
power off your phone and press ( volume down - home button - power button )
after the mobile opens in screen like recovery press volume up and connect the mobile to PC and hit start in Odin
when it finishes you'll get Reset/Pass and the mobile will restart
---------- You flashed it successfully --------

Related

[need help] unable to flash *.tar.md5 file by odin

sir i have download update for my sgy. after download complete i have open it with winRAR in pc i got only 2 file in it, one is in *.tar.md5 formate and another one is in *.dll .now i have selected *.tar.md5 as pda in odin and click on start and its fail to install... then again i have done but it alaways show fail...for more information i google it for solution but i didnt get usefull info. someone said to rename it to .tar i have done that too...but unsuccessful...so i thought that this file may be currupted so again i have download another ddlc3 update for sgy. but unfortuntly this also contain same extension *.md5 i try this too but it is also showing fail... please help me... for kind information i alaways untick re-partation...before updating
post here http://forum.xda-developers.com/showthread.php?t=1600373
http://galaxyydroid.wordpress.com/2012/06/16/stock-rom-cwm-flashable-with-14-toggles-status-bar/ flaah stock rom via cwm recovery
Hope this help you, if u found this helpful den press Thanks
shailu1990 said:
sir i have download update for my sgy. after download complete i have open it with winRAR in pc i got only 2 file in it, one is in *.tar.md5 formate and another one is in *.dll .now i have selected *.tar.md5 as pda in odin and click on start and its fail to install... then again i have done but it alaways show fail...for more information i google it for solution but i didnt get usefull info. someone said to rename it to .tar i have done that too...but unsuccessful...so i thought that this file may be currupted so again i have download another ddlc3 update for sgy. but unfortuntly this also contain same extension *.md5 i try this too but it is also showing fail... please help me... for kind information i alaways untick re-partation...before updating
Click to expand...
Click to collapse
u downloaded the wrong zip.. try other ones
its single file not support flash using odin(galaxy y odin 1.84/1.85) .....................
convert it odin package(3 file) using doky73 great tool
[TOOL] SplitFUS -create your own Odin ready pack
or
find ur odin package hare
[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages

Micromax A45 ROOTED!! (MTK 6573)

So, this is it! MICROMAX A45 has been rooted!! :laugh:
Things you would be needing:
1. SP flash tool -> ver 2.1 preffered (google it)
2. Download and extract my attatched .rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (download the attatchment from this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A45 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A45 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A45 is successfully rooted!!!...:highfive:
Credits:
Me!
Sahil Deep, gave me a link to an original boot.img of A45
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
EDIT: I HAVE ALSO ATTATCHED THE ORIGINAL BOOT.IMG OF THE A45 FOR PEOPLE WHO WANT TO USE THE STOCK BOOT.IMG!
vshlkmr said:
So, this is it! MICROMAX A45 has been rooted!! :laugh:
Things you would be needing:
1. SP flash tool -> ver 2.1 preffered (google it)
2. Download and extract my attatched .rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (download the attatchment from this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A45 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A45 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A45 is successfully rooted!!!...:highfive:
Credits:
Me!
Sahil Deep, Indiedevers member, gave me a link to an original boot.img of A45
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
Click to expand...
Click to collapse
New around here (xda-dev and Android hacking), so please be gentle if I ask a stupid question. Have read may recommendations that before flashing a new ROM, one should backup their current ROM and user-data, so that one can recover one's phone if it were to be bricked for some reason. However, looks like to be able to do that, you need to Root the device first. And this seems to be a vicious circle.
Wondering if some way of backing up original ROM exists, without needing to Root, and how did Sahil Deep / Indidevers manage to get the original boot.img !!
BTW, I am probably too sleep-deprived, because I cannot seem to find the "Thank" button !! Will definitely click it once I've had a chance to try out your method and succeeded. Until then (and until I find the darn button), please accept my gratitude.
problem
i am having problems in using sp flash;
could you please detail that whole topic plz plz...
i too own micromaxx a45.
Worked!!!
It worked n rooted.. can you plz upload the original boot.img file of a45? and i also need a cwm custom recovery for a45....
plz make a rom
anyone make a rom for Micromax a45
---------- Post added at 12:16 PM ---------- Previous post was at 11:59 AM ----------
any tweak for a45..?
---------- Post added at 12:21 PM ---------- Previous post was at 12:16 PM ----------
how to add thanks button
---------- Post added at 12:44 PM ---------- Previous post was at 12:21 PM ----------
fast
Thanks for original boot.img..... and clicked thanks button too
Recovery console doesn't load
I followed the instructions you've given and have successfully rooted my Micromax A45! now the problem is, i manually flashed the clockworkmod recovery image onto RECOVERY using the SP Flash Tool v2.1 and when i try to boot into recovery mode, it gets stuck at the logo(Superfone PUNK logo) and doesnt go further. Pls suggest a solution. Many thanks!:cyclops:
i have
I have boot.img
---------- Post added at 11:15 AM ---------- Previous post was at 11:11 AM ----------
vshlkmr said:
So, this is it! MICROMAX A45 has been rooted!! :laugh:
Things you would be needing:
1. SP flash tool -> ver 2.1 preffered (google it)
2. Download and extract my attatched .rar file.
3. Unlockroot (get it from www.unlockroot.com).
4. MTK drivers (download the attatchment from this xda post)
5. ADB drivers (No need to worry about, unlockroot will automatically setup the adb driver while rooting)
Ok so let's move on to the steps:
1. This rar file contains my modified boot.img & the A45 scatter file (needed by SP Tools, tells the SP tools which rom addresses to flash).
2. Install the MTK drivers, just run the InstallDriver.exe program inside the MTK folder).
3. Most of you might be experienced with flashing through SP Tools, for those who are using it for the first time read this excellent guide on how to use it -> MTK Flashing Using SP Tools
4. After flashing, reboot your handset by taking out and reinserting the battery.
5. When the phone boots up go to Settings->Applications->Development and tick mark "Enable Debugging".
6. Now attach your phone using the data cable.
7. Open Unlockroot program through windows start menu.
8. Click the big green root button.
9. It will ask for installing drivers, click "yes"...it's now installing the ADB drivers.
10. Finally it will root your phone and will ask you for rebooting the phone, click yes.
11. Let your A45 reboot.
Finally after booting, check the app drawer for an application "Superuser"...Congratulations!! your A45 is successfully rooted!!!...:highfive:
Credits:
Me!
Sahil Deep, Indiedevers member, gave me a link to an original boot.img of A45
Caution: You can softbrick your device if you play around much on "GOD MODE" (Superuser mode), know what you are doing and accept the consequences if you make your device unusable (although highly rare)..
ANY QUESTIONS?? DONT HESITATE TO ASK ME!! POST IT TO THE FORUM, NO PM!
&..hey press the 'thanks' button if u think i deserve it..:angel:
EDIT: I HAVE ALSO ATTATCHED THE ORIGINAL BOOT.IMG OF THE A45 FOR PEOPLE WHO WANT TO USE THE STOCK BOOT.IMG!
Click to expand...
Click to collapse
vishal this my profile sahil deep
CWM recovery for Micromax a45
Hi,
I had earlier posted about a problem i had with clockworkmod on Micromax a45, and i'm really happy to say I have solved it! i edited the recovery.img file and replaced the cwm-kernel with the a45 stock recovery kernel and voila! it works perfectly! I have attached the custom recovery img which can be flashed using the SPF Tool. BTW, can anyone suggest any good custom ROMs for micromax a45? Thank you.:laugh:
How to add a kernal to recovery.img
prashanthca said:
Hi,
I had earlier posted about a problem i had with clockworkmod on Micromax a45, and i'm really happy to say I have solved it! i edited the recovery.img file and replaced the cwm-kernel with the a45 stock recovery kernel and voila! it works perfectly! I have attached the custom recovery img which can be flashed using the SPF Tool. BTW, can anyone suggest any good custom ROMs for micromax a45? Thank you.:laugh:
Click to expand...
Click to collapse
I am new to this thread but I just wanted to know how to edit recovery.img files I could not repack them using perl scripts please help.I have the whole romdump of A45
Repack img file
ayush.gaud said:
I am new to this thread but I just wanted to know how to edit recovery.img files I could not repack them using perl scripts please help.I have the whole romdump of A45
Click to expand...
Click to collapse
[THIS ONLY WORKS IN LINUX]
extract the zip file to the folder where you've unpacked the img file and modified it. open terminal, change the directory to that folder and type in
./mkbootimg --cmdline 'no_console_suspend=1 console=null' --kernel name-of-the-kernel --ramdisk name-of-the-ramdisk.gz -o recovery-new.img
how to install clockworkmod on micromax a45
Hi... Iam new to this forum and please tell me how to install clockworlmod recovery on my micromax a45 (rooted). Please Help me.
And thanx for the rooting information.
Custom Rom
prashanthca said:
[THIS ONLY WORKS IN LINUX]
extract the zip file to the folder where you've unpacked the img file and modified it. open terminal, change the directory to that folder and type in
./mkbootimg --cmdline 'no_console_suspend=1 console=null' --kernel name-of-the-kernel --ramdisk name-of-the-ramdisk.gz -o recovery-new.img
Click to expand...
Click to collapse
thanks for your reply. I would also like to know how we can port any other rom to our device or create update.zip I have tried on many roms but unsuccessful.
Porting
ayush.gaud said:
thanks for your reply. I would also like to know how we can port any other rom to our device or create update.zip I have tried on many roms but unsuccessful.
Click to expand...
Click to collapse
CHeck this out: [GUIDE] How to port Stock/GB/CM7/CM9/ICS/CM10/JB Based ROMs [Update: Sept.25.2012] - xda-developers
Also, can you upload the romdump and post the link?
unpack repack boot.img
prashanthca said:
[THIS ONLY WORKS IN LINUX]
extract the zip file to the folder where you've unpacked the img file and modified it. open terminal, change the directory to that folder and type in
./mkbootimg --cmdline 'no_console_suspend=1 console=null' --kernel name-of-the-kernel --ramdisk name-of-the-ramdisk.gz -o recovery-new.img
Click to expand...
Click to collapse
I have tried this command it says could not load boot.img-kernal I think I need another tool(or script) for unpacking and repacking can you please upload the tool you have used.
I will soon upload romdump link.
---------- Post added at 06:33 PM ---------- Previous post was at 06:27 PM ----------
I am new to this thread so can you please help me how to unpack repack boot.img I am getting error could not load kernel 'boot.img-kernal' I am trying to port custom roms so please help
---------- Post added at 06:41 PM ---------- Previous post was at 06:33 PM ----------
jayachar88 said:
New around here (xda-dev and Android hacking), so please be gentle if I ask a stupid question. Have read may recommendations that before flashing a new ROM, one should backup their current ROM and user-data, so that one can recover one's phone if it were to be bricked for some reason. However, looks like to be able to do that, you need to Root the device first. And this seems to be a vicious circle.
Wondering if some way of backing up original ROM exists, without needing to Root, and how did Sahil Deep / Indidevers manage to get the original boot.img !!
BTW, I am probably too sleep-deprived, because I cannot seem to find the "Thank" button !! Will definitely click it once I've had a chance to try out your method and succeeded. Until then (and until I find the darn button), please accept my gratitude.
Click to expand...
Click to collapse
I have romdump of A45 we can use psneuter and romdump to backup roms without root and same way we can root phone without any unsecure boot.img I did it the same way and succeeded.
prashanthca said:
Hi,
I had earlier posted about a problem i had with clockworkmod on Micromax a45, and i'm really happy to say I have solved it! i edited the recovery.img file and replaced the cwm-kernel with the a45 stock recovery kernel and voila! it works perfectly! I have attached the custom recovery img which can be flashed using the SPF Tool. BTW, can anyone suggest any good custom ROMs for micromax a45? Thank you.:laugh:
Click to expand...
Click to collapse
can u make a cwm recovery for a52 too???
hi i am using micromax a52 can u tell me...how to get clockwork recovery ...i tried to do it with builder colckworkmod.com...i got 4 file and.one named...recovery.img...what can i do now...i try to flash it with...uncle tool but...when i flash it it stuck on superfone aisha logo....plz help thnks in advance
Sent from my A52 using xda app-developers app
port cwm
psychopac said:
can u make a cwm recovery for a52 too???
Click to expand...
Click to collapse
Yes, if you can provide me the stock recovery.img of a52. But i'm not certain it'll work 100%, because a friend of mine tried the same method for micromax a56 and could not get it to work.
ttp://db.tt/s3a5l4dX. here is the drop box link of stock recovery.img
Sent from my A52 using xda app-developers app
prashanthca said:
Yes, if you can provide me the stock recovery.img of a52. But i'm not certain it'll work 100%, because a friend of mine tried the same method for micromax a56 and could not get it to work.
Click to expand...
Click to collapse
plz check thos..i upload it on dropbox...
send from mah rooted a52

[Q] Help with flashing recovery via ODIN

Im in download mode/ODIN in my phone but when i start start Odin and select PDA i select recovery.clockwork5.0.27 hercules it says no file found. any help?
Also when i install superuser from zip file what do i install (META-INF /) or (system/)
skinfingers001 said:
Also when i install superuser from zip file what do i install (META-INF /) or (system/)
Click to expand...
Click to collapse
do not unzip the file... just flash the zip!!!
---------- Post added at 01:59 PM ---------- Previous post was at 01:56 PM ----------
skinfingers001 said:
Im in download mode/ODIN in my phone but when i start start Odin and select PDA i select recovery.clockwork5.0.27 hercules it says no file found. any help?
Click to expand...
Click to collapse
Maybe you should take your time and read everything in here...
http://forum.xda-developers.com/showthread.php?t=1311194
Just to make sure you're not going the wrong way and brick the phone...

How do I update my basebandversion?

Hi,
I have downloaded the latest Basebandversion from this page: https://www.samdownloads.de/download/t805xxu1bpc4-dbt-5-0-2-germany/
But I cant install it over TWRP because it's a rar archive.
Included files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img (can I left this? wanna install PAC-MAN Rom after this update over TWRP)
sboot.bin
system.img
I can extract them and install them step by step over TWRP but then I cant install the .bin-files I think. So how should I install this for my SM-T805?
Hope that anybody can help me with that so that I can use PAC-Man Rom with the lates included security patch lvl.
My actually system is the following:
OS-Version: 5.0.2
Baseband: T805XXU1BOD3
Kernel-Version: 3.4.110-IronKernel_V2.5.5_TW_T805 - some [email protected] notation
Build: IronRom V2.5 T805
Pls dont ask why I want to change my current rom. My prefered one is CM but therefor is only an unofficial 13.0 version with a few bugs and the 12.x won't work. So I decided to switch to
PAC-MAN ROM.
Sincerly
Chaos234
Odin.
ashyx said:
Odin.
Click to expand...
Click to collapse
Ok, and can u tell me which file goes in which line? It's not decsribed and can I input all files at the same time so that it can run as one process?
Chaos234 said:
Ok, and can u tell me which file goes in which line? It's not decsribed and can I input all files at the same time so that it can run as one process?
Click to expand...
Click to collapse
It's not a rar archive, it's a tar archive with an .md5 extension.
Put in AP slot and flash.
ashyx said:
It's not a rar archive, it's a tar archive with an .md5 extension.
Put in AP slot and flash.
Click to expand...
Click to collapse
Ok, then I must unzip it because my one is a rar archiv and in it there is a folder and in this folder there is the .tar.md5 with a password protection.
If this works (I know the password) can odin flush it?
Chaos234 said:
Ok, then I must unzip it because my one is a rar archiv and in it there is a folder and in this folder there is the .tar.md5 with a password protection.
If this works (I know the password) can odin flush it?
Click to expand...
Click to collapse
Yes like I said previously you need to flash the tar.md5 in the AP slot.

Flash_all bat script urgent

i just need the flash all bat script , i need it to flash stock rom , the one i downloaded didnt come with anything or please share a link where i can download proper stock rom with all needed files to flash it
Please use this thread to download the ROM/Firmware you need: https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871
C302 said:
Please use this thread to download the ROM/Firmware you need: https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871
Click to expand...
Click to collapse
i downloaded similaire one but it has nothing with it , the file is tgz form when i open it there is a tar file inside and that's all
.tar is an archive file. You have to extract it also

Categories

Resources