[Q] Reset/Clear Carrier Info? - Samsung Epic 4G Touch

Hello!
I currently own a virgin mobile Samsung Galaxy s2 E4GT (sph-d710) and I'm having trouble finding any help on this subject. This phone has had a good life and I've since moved my number/service over to sprint, however my number is still shown in my phone's carrier information on the About Device page even after factory resetting it. My username is also shown and contains my last name in it. I wish to sell this phone on eBay, but I don't want my personal info to be revealed on that page to whomever purchases the device from me.
Is there anyway to clear my carrier info off the phone directly? Since my number is now on Sprint, my virgin mobile service has ceased and no longer exists making me unable to update the phone's profile or anything like that. I've searched for an answer and found nothing remotely related to this, but I do apologize if I missed something. Any help would be greatly appreciated!
And some basic facts about the device. It is currently running a rooted 4.1.2 stock rom on GB28. I was previously running CM11 nightly builds on it prior to bringing the phone back to stock. If you need any more info, just holler.

No comments? I would think this would be a relatively simple thing to do.

Related

[Q] T-989 - No data network. Mobile Network State: Disconnected

Hi there. I own an unlocked, rooted t 989 Samsung Galaxy SII which I bought in the US. I recently moved to the Netherlands, and got a new simcard with Vodafone. The problem: I can't get my data to work.
I have tried (almost) everything, so prepare for a read. Here's the list:
- Sim card is fine, I tried it in a old phone and 3G pops up instantly
- Rebooted, pulled battery, turned mobile connections on/off, handpicked network, etc, etc, all the basics.
- Got the APN settings from Vodafone. Tried them manually, resetted them, automatically, turned it on, turned it off.
- Going online through Wifi works.
- Under settings-Status it reads under Mobile Network State: Disconnected. But I know that the phone detects the network correctly. It can distinguish between UMTS and GPRS here.
- So there seems to be no trouble with the phone being incompatible with the network. I read online that other people had NO trouble using their T989 in Europe.
- I tried inserting my old American pre paid T mobile sim card and turn roaming on. No luck.
- A lot of other people with the same problem tried to link it to Easy Battery Saver. I tried updating, uninstalling and going into its settings to find out what it could be, but nothing.
The last thing I can still try is to factory reset, unroot and try to get the phone to its most original state and see what it does. But before I triple wipe all my contacts, pictures, apps, etc, I want to make sure I did absolutely everything to try and fix this beforehand. Being a noob here, I can't post any links but I trust you I tried.
The people at Vodafone are of no help whatsoever. I hope you geniuses could help me any further.
[Edit] And sorry for posting this in General Chat. If a mod could move my question to Q&A I'd be most thankful..!
I am having the exact same damn problem! it started with being unable to send a simple text message yet having data. now it says it is searching forever
thijsr said:
Hi there. I own an unlocked, rooted t 989 Samsung Galaxy SII which I bought in the US. I recently moved to the Netherlands, and got a new simcard with Vodafone. The problem: I can't get my data to work.
I have tried (almost) everything, so prepare for a read. Here's the list:
- Sim card is fine, I tried it in a old phone and 3G pops up instantly
- Rebooted, pulled battery, turned mobile connections on/off, handpicked network, etc, etc, all the basics.
- Got the APN settings from Vodafone. Tried them manually, resetted them, automatically, turned it on, turned it off.
- Going online through Wifi works.
- Under settings-Status it reads under Mobile Network State: Disconnected. But I know that the phone detects the network correctly. It can distinguish between UMTS and GPRS here.
- So there seems to be no trouble with the phone being incompatible with the network. I read online that other people had NO trouble using their T989 in Europe.
- I tried inserting my old American pre paid T mobile sim card and turn roaming on. No luck.
- A lot of other people with the same problem tried to link it to Easy Battery Saver. I tried updating, uninstalling and going into its settings to find out what it could be, but nothing.
The last thing I can still try is to factory reset, unroot and try to get the phone to its most original state and see what it does. But before I triple wipe all my contacts, pictures, apps, etc, I want to make sure I did absolutely everything to try and fix this beforehand. Being a noob here, I can't post any links but I trust you I tried.
The people at Vodafone are of no help whatsoever. I hope you geniuses could help me any further.
[Edit] And sorry for posting this in General Chat. If a mod could move my question to Q&A I'd be most thankful..!
Click to expand...
Click to collapse
Try flashing a different radio/modem then an american one?
@decko5 Nice to see I'm not the only one, but that doesn't help us yet .
@doug36 Besides the fact that I'm running a stock ROM that should be compatible with no issues, I'm not sure how I'd do that. I can flash a separate part of the kernel? That sounds like a very tricky thing to do.
thijsr said:
@decko5 Nice to see I'm not the only one, but that doesn't help us yet .
@doug36 Besides the fact that I'm running a stock ROM that should be compatible with no issues, I'm not sure how I'd do that. I can flash a separate part of the kernel? That sounds like a very tricky thing to do.
Click to expand...
Click to collapse
It's actually pretty easy. You can flash most radios via ClockworkMod Recovery. I couldn't find any threads with a list of Galaxy S-II radios here on XDA, but I found one over at RootzWiki for you. http://rootzwiki.com/topic/2725-radio-samsung-galaxy-s-ii-radios-updatezip-updated-20-aug-2011/
Just find the corresponding one to your geographical location and carrier (Google is your friend) and follow the steps.
Good luck and hope it helps!
(p.s. you should definitely look to see which radio you currently have so that you can download a backup of it before you go flashing radios.)
Thanks for that very helpful post! I've raped and butchered Google, but I'm still having trouble finding out which modem I should download. There seem to be so many and the post on RootzWiki gives no guidance to which is which. Any wisdom on this? I'm in the Netherlands, so Western Europe, on a Vodafone network.
By the way. I fully wiped my phone and installed Team Kang's Juggernaut 5.. No luck, same problem. What I found really, really weird is that it was instantly in Dutch. (Which is ok, I speak Dutch) But I don't remember ever selecting a language. How does it know? Besides, I'd rather have it in English .
What I did find out is that I'm still using a old firmware, UVKID, instead of UVKL1. So I'm restoring back to my previous ROM and trying to update. I'll see what happens. If that doesn't work, I'm going to restore my phone to stockest of the unrooted stocks and try and update.
If that doesn't work, I'll have no option but to send the phone to T-mobile.
I'll try the modem update as soon as I understand what I'm doing . But it does sound promising. Thank you so much for your help, it's greatly appreciated!
Hi guys,
I've updated my firmware to UVKL1, still no luck. Anybody who can tell me which radio I should try on this Vodafone network in the Netherlands?
I am from India and had faced this similer issue with many of my android phones specially with captivate and infuse.......Here what i always did to connect data network.
Just uncheck the use packet data network box in mobile network settings and try to move out from that area (say u are in ur office and going back home) and check the data in settings.
This thing has worked for me always, I don't knw if its related to the OS or to the network provider but this has helped.
Have u tried any other network sim card on ur phone ?
An update for other people that might be looking for a solution in the future. It turns out to be a clear Vodafone problem. I tried a different simcard from a different network (both T-mobile Netherlands and KPN), and they instantly worked without any trouble.
I went back to a different Vodafone store in Amsterdam, and they were much more helpful than the first one. The sales guy told me he had seen the same problem with AT&T iPhones on the Vodafone network.
I called Vodafone, and they have been very nice to me. But they haven't found a solution yet and are looking into it. They see me registering to the network, granting me access, but still my data doesn't work. They've also told me that they will let me cancel my contract for no cost if they don't find a solution.
So problem remains unsolved, but at least there's some light at the end of the tunnel. I was close to buying a new 500 dollar phone... Americans going to Europe: Beware with getting a Vodafone simcard. Sorry to the Vodafone guys, but as for now, that's the status.
So to give closure to this issue (I always hate it when people fix their problem without telling the interwebs..)
IT WORKS!
After an initial terrible experience at the Vodafone counter, the headquarter tech guys have really been great to me. So it is indeed a Vodafone problem. American phones always give them a headache. They don't know what causes the problem exactly, but they do have a fix. It turns out that when logging on to the data network, American phones (AT&T iPhones, my T989 SGsII, and some other Android devices) sent some gibberish along that make the Vodafone server go cuckoo.
The solution was, miraculously, to sign me up (for free!) to the WiFi hotspot service that Vodafone provides, and then logging on to a different APN, being: office.vodafone.nl in my case.
Hope this helps anyone who's having similar issues.
T-989 network solution SOLVED ?
thijsr said:
So to give closure to this issue (I always hate it when people fix their problem without telling the interwebs..)
IT WORKS!
After an initial terrible experience at the Vodafone counter, the headquarter tech guys have really been great to me. So it is indeed a Vodafone problem. American phones always give them a headache. They don't know what causes the problem exactly, but they do have a fix. It turns out that when logging on to the data network, American phones (AT&T iPhones, my T989 SGsII, and some other Android devices) sent some gibberish along that make the Vodafone server go cuckoo.
The solution was, miraculously, to sign me up (for free!) to the WiFi hotspot service that Vodafone provides, and then logging on to a different APN, being: office.vodafone.nl in my case.
Hope this helps anyone who's having similar issues.
Click to expand...
Click to collapse
ok the issue here is that some of the t989 are vodafone and some are USA network , now the other solution is that you flash with command prompt which there is a link to that tool im going to upload from the link i got it from . its also a clockrecoverymod , but this 1 asks you for deleting data user on the device and also resets the network includes USA/overseas though if your not customed roms
or any hacked roms , after flashing this device your basically removing any unwanted apps and cache that are hidden during network searching will be fixed bugs , put the simcard in slot but make sure that is a 3G/4G accounts, than its going to reboot the device automatically , it should be searching for service and also will be a circle with a slash on it where the service bar usually is , just wait about 1/2 hour to an hour maximum time let it do its thing , ok whats happening now to the phone is that is thinking with android network with usa and overseas market apps comparing both carriers network also gets the proper address for the custom rom or original kernel, froyo either 1 will get the correct network address and / VPN / and also will be adding both T-mobile/AT&T choose T-mobile dont go for AT&T cause it will research network configuration plus the phone its not unlocked for both its just a network passby to get correct WPN/VPN/clockworkrecoverymod .
Where is an fix?
Sent from my SGH-T989 using xda premium
@#11 That reads like gibberish to me
@#12 I think I posted a fairly extensive report on how I fixed this...?

[Q] Need help getting an EVO on MetroPCS...

Hi all,
Thanks for a least looking at this thread and providing feedback. So here is my situation.
1. Bought EVO 4g from a friend who bought new phone and transferred his phone number from Sprint to Verizon so the phone does not have access to Sprint's network.
2. My wife has a crappy MetroPCS phone I would like to replace with the EVO 4g.
3. I have all the software that has been talked about in many threads here: diagnosis drivers, cdma workshop, prl, and a few other things which I can't remember.
4. I have rooted the phone with S-OFF and currently running MetrogenMod 4.5
Q1: Does the phone need to be on the Sprint network in order for me to get the phone working on MetroPCS?
Q2: After reading all of the forums it sounds like the phone will magically work on MetroPCS' network, but something tells me I'm missing something?
Q3: How do I get my wife's phone number transferred over to this phone? It seems I can only transfer the current phone number that the phone has even though it is not mine.
Thanks again in advance and I apologize if these questions have been asked before, but I did not see any.
Jamdev12
PS: Ok after reading and getting familiar with this stuff it seems there are two ways of doing this, but I rather get some expertise from someone first :
1. Easiest method. Call MetroPCS and request an ESN swap. Since I own both phones I don't foresee this as illegal and I've heard of people successfully getting this done.
2. Hardest method and possibly bricking the phone. Call Sprint and request MLS number. Then use the software that is available to get ESN from old phone and write it to the new phone. If done right, the new phone will act and connect as if it were the old phone.
To all, am I correct in the above assumptions?
You shouldn't need to call sprint for your msl..search the play store for "msl reader". It'll save you that hassle anyways. ....Did a quick search and found this guide over on af.. http://androidforums.com/evo-4g-all-things-root/538899-guide-metro-pcs-donor-flash.html .. I flashed to boost so thats the extent of my experience. Hope it helps.
Hi nrvlljr,
Thanks for this link. I will be trying this tonight and if I get it working, I'll post my findings. Wish me luck. :good:
jamdev12
jamdev12 said:
Hi nrvlljr,
Thanks for this link. I will be trying this tonight and if I get it working, I'll post my findings. Wish me luck. :good:
jamdev12
Click to expand...
Click to collapse
Break a leg buddy..Just make sure to follow the instructions to a tee and you'll be fine.
nrvlljr said:
Break a leg buddy..Just make sure to follow the instructions to a tee and you'll be fine.
Click to expand...
Click to collapse
Hi nrvlljr,
Thanks for the encouragement. Unfortunately it did not work for me. For some reason the phone is unable to log into the MetroPCS network as my old phone. One thing that confused me about the instructions was to save the nam1 and Nam2 data for my old phone because not once after that did I use this data to reprogram the new phone. All it says is to replace the ESN and meid numbers in the nvm folder and reboot.
Next I tried the MetroPCS tutorial in the developer forum to get MetroPCS working, ROM and everything without success. I'm able to connect via roaming, but not on my current phone number.
Anyways, if you or anyone here has any ideas, I would gladly appreciate it. At least the phone is not bricked, yet.
Thanks in advance.
jamdev12 said:
Hi nrvlljr,
Thanks for the encouragement. Unfortunately it did not work for me. For some reason the phone is unable to log into the MetroPCS network as my old phone. One thing that confused me about the instructions was to save the nam1 and Nam2 data for my old phone because not once after that did I use this data to reprogram the new phone. All it says is to replace the ESN and meid numbers in the nvm folder and reboot.
Next I tried the MetroPCS tutorial in the developer forum to get MetroPCS working, ROM and everything without success. I'm able to connect via roaming, but not on my current phone number.
Anyways, if you or anyone here has any ideas, I would gladly appreciate it. At least the phone is not bricked, yet.
Thanks in advance.
Click to expand...
Click to collapse
Ok, so after more fiddling, I was able to get Data working, but no talk and text. To get data working, I had to run DFS to import the latest PRL from MetroPCS into the phone. Once I did that and rebooted the phone, 3G started to work, but still could not get Talk and Text to work.
Then I did the worst thing that I could have done, I think. I order for me to get Talk and Text working, I took the phone to a MetroPCS. Well, I let them run the phone through Houdini and now Talk and Text work, but I can't get 3G to work even though I have a plan that has Talk, Text and Data and I have reloaded the MetroPCS PRL in the phone.
Has anyone ran into this problem? Would I have to get my phone off the MetroPCS database in order for me to get 3G running again? Any help would be gladly appreciated.
Hello, I, new here..
I have literally tried everything i have read from forum to forum, post to post, from installing DIAG drivers to QPST, apn, anycut, everything i have found and cannot make my EVO to connect to the web. My sister had this phone fully working (except 4G) and now that i transferred it to my account i make calls and text but not MMS or WEB. less 3G. I am very frustrated but willing to keep on reading instructions if anyone would be able to help!!. Thank you very much and you guys are doing a very great job. miraculously i am obtaining knowledge i never even though it existed! unfortunately havent being able to solve my problem.
jamdev12 said:
Ok, so after more fiddling, I was able to get Data working, but no talk and text. To get data working, I had to run DFS to import the latest PRL from MetroPCS into the phone. Once I did that and rebooted the phone, 3G started to work, but still could not get Talk and Text to work.
Then I did the worst thing that I could have done, I think. I order for me to get Talk and Text working, I took the phone to a MetroPCS. Well, I let them run the phone through Houdini and now Talk and Text work, but I can't get 3G to work even though I have a plan that has Talk, Text and Data and I have reloaded the MetroPCS PRL in the phone.
Has anyone ran into this problem? Would I have to get my phone off the MetroPCS database in order for me to get 3G running again? Any help would be gladly appreciated.
Click to expand...
Click to collapse
What kind of phone did you use for the donor flash? I had this problem with my old evo 4g. I had it donor flashed from a freeform 1. Even though I was paying for 3g the evo didnt get it. I assumed it was because my freeform didnt have 3g so the ESN being read by the network on my evo didnt require it to send 3g data. Just a guess

Someone else sent my text to my friend

Wondering if my phone got hacked. I am running infamous rom on tmobile. Tonight my friend received my text messages from another number, and when my friend questioned who he was, he either didnt seem surprised or he was just playing along. If my phone did get hacked, do you guys have any advice like a system format, a setting I can change, or should I call tmobile directly?
Thank in advance
mikatachan said:
Wondering if my phone got hacked. I am running infamous rom on tmobile. Tonight my friend received my text messages from another number, and when my friend questioned who he was, he either didnt seem surprised or he was just playing along. If my phone did get hacked, do you guys have any advice like a system format, a setting I can change, or should I call tmobile directly?
Thank in advance
Click to expand...
Click to collapse
I'd call T-Mo directly and advise them of the situation. You might ask your buddy if he would participate and allow his carrier to use information to find what phone did the spoofing, and they can track the user via the IMEI number that is recorded when transmission is initiated. You MIGHT be required to have a police report to get the tracking done, so you ought to consider making the report to your local PD.
Be SURE your buddy isn't jerking your chain before you do anything, and I'd probably want to SEE the TM before any action on your part.
Aloha and Good Luck!
Bobolinko's advice is correct and the best course of action.
But to answer your specific question about the phoen being hacked...No, wiping it won't help. Neither will installing a different ROM or anything else.
If what your buddy is saying is actually happening, it's most likely not that someone have hacked into your phone and is remotely sending messages from your phone. It's far more likely that someone intercepted your cell signal, hacked the IMEI number (as stated above) and applied your IMEI number to another device, thus cloning your phone.
That message to your buddy came from another device entirely and never went through your phone at all. The problem is that this is very hard to fix. You can't have T Mobile jus tblock your IMEI number because then your phone won't work either. T Mobile can't distinguish between your phone and the cloned fake phone because both are broadcasting the same IMEI number, which is the identifier T Mobile uses to use your phone.
Have you left the United States recently and used your phone in another county? This whole scenario is vey common in Russia and other Eastern European countries. People got there on a vaction, use their phone, and immediately the phone's IMEI is captured and stolen. If you had mobile data turned on or used wifi, the user data on the phone is also likely compromised. Meaning all passwords, etc.
If you haven't left the US, it's much less likely, but still possible this is what happened.
Someone could have also physically looked at your phone, wrote down the IMEI number under the battery, and cloned it that way just to screw with you. No intercepted radio signals or anything. Just good old fashioned "copying the key". In that scenario it's almost certainly someone you know (unless you are in the habit of leaving your phone completely unattended around strangers).

LG LS-980 Sprint to NET10 driving me crazy!!!!!

Hello,
First, let me express my deepest thanks in advance for those of you who may be of assistance. I have visited this site many times over the years when I needed to find the answers to smartphone related issues (mostly rooting..etc). I have usually found the information that I needed via reading posts and trial and error; however, I am having a problem that I cannot find the answer to and it is frustrating the crap out of me.
So, here goes:
I bought a LG LS980 off of Ebay. It was locked to Sprint and I had a friend of mine root it (since I couldn't figure it out and it ended up being that the firmware had to be downgraded since a patch was bumped to it) and unlocked (or so i was told, but I do not know how to find out). It is currently running Cyanogenmod 12.1. I wanted to use my old phone's SIM and pop it into my new phone so that I could enjoy it (the old phone was a Nexus and ran hella slow). So, anyway.... I contacted NET10 customer support since that is my carrier and explained what I wanted to do. They let me know that as long as it is unlocked that I would be able to just swap the SIM into the new phone and should be good to go. They checked my IMEI and said that the phone was, indeed, compatible and as long as it is unlocked it should just be a matter of a simple ROM swap. Not the case. I put the SIM in and booted it up. It went from No Service to saying "Sprint" on the upper left hand corner. I try to make a call and it states that, "The code or number that I am dialing is incorrect, please try the code or number again". I looked this up on the internet and didn't find a focused answer. I talked to my friend and he stated that I may have to set up a new APN profile.
I have checked the APN settings on it and all of the APN profiles have the prefix "Verizon". I used this mini tutorial at http://forums.androidcentral.com/goo...-settings.html along with the NET10 settings to try and make a profile. Both of their workarounds don't seem to work. I can enter about half of the information and then either click BACK or SAVE and then the profile is gone. I am not sure this is the reason that my phone is not working, but I thought I would give it a try. I have also tried to use this tutorial: http://forum.xda-developers.com/showthread.php?t=2798566 as a loose guide, TWRP installed. Keep in mind that I believe that my firmware was rolled back to ZVE. and not ZVD. When I have tried to edit the build.prop values at the tutorial states it does not save. Also, there are two lines that are not even in my build.prop (ro.build.target_operator and persist.service.crash.enable). When I have tried to edit or add it adds them but does not save and definitely does not persist through reboot. I feel as if I am close to getting the phone to work, but I am unsure where to go from here. I really do NOT want to have to go back to a stock ROM and all of that because....well.... my friend did the rooting and installing of cyanogenmod and I don't want to risk undoing all of his work and having to pay $ to have it done all over again (I have rooted phones..etc, but this G2 was a MOFO because of the firmware patch for me). NET10 CS and TS was of no help and they gave me a ticket number (and to tell you the truth the are outsourced and I can't understand what their reps are saying). So, does anyone have any advice or threads that I can look at? Like I said, I feel as if it is close, but no matter what number I call it says that recording. I get no incoming calls (although it rings when listening to the incoming calling phone's speaker). I am also unable to send or receive SMS or MMS messages. Any help would be greatly appreciated. I am not the most technically savvy person, but I can answer your questions to the best of my ability and I am good at following directions. (I have about 5-6 phone root/ROMS under my belt and even 2-3 SPRINT to NET10 activations, but this one is just perplexing the crap out of me) . Could it be that the phone is not unlocked???? How do I check this??? Is there a way??? When I put in the NET10 SIM it never asked me for an unlock code so I am assuming that my friend unlocked it? I have also tried "Turn the phone ON and type 2945#801# If nothing happens, type 2945#802# or 2945#*803#" and no hidden menu appears asking for an unlock code.

LG G2 Sprint to Net 10 not working.... almost there...what am I missing????

Hello,
First, let me express my deepest thanks in advance for those of you who may be of assistance. I have visited this site many times over the years when I needed to find the answers to smartphone related issues (mostly rooting..etc). I have usually found the information that I needed via reading posts and trial and error; however, I am having a problem that I cannot find the answer to and it is frustrating the crap out of me.
So, here goes:
I bought a LG LS980 off of Ebay. It was locked to Sprint and I had a friend of mine root it (since I couldn't figure it out and it ended up being that the firmware had to be downgraded since a patch was bumped to it) and unlocked (or so i was told, but I do not know how to find out). It is currently running Cyanogenmod 12.1. I wanted to use my old phone's SIM and pop it into my new phone so that I could enjoy it (the old phone was a Nexus and ran hella slow). So, anyway.... I contacted NET10 customer support since that is my carrier and explained what I wanted to do. They let me know that as long as it is unlocked that I would be able to just swap the SIM into the new phone and should be good to go. They checked my IMEI and said that the phone was, indeed, compatible and as long as it is unlocked it should just be a matter of a simple ROM swap. Not the case. I put the SIM in and booted it up. It went from No Service to saying "Sprint" on the upper left hand corner. I try to make a call and it states that, "The code or number that I am dialing is incorrect, please try the code or number again". I looked this up on the internet and didn't find a focused answer. I talked to my friend and he stated that I may have to set up a new APN profile.
I have checked the APN settings on it and all of the APN profiles have the prefix "Verizon". I used this mini tutorial at http://forums.androidcentral.com/goo...-settings.html along with the NET10 settings to try and make a profile. Both of their workarounds don't seem to work. I can enter about half of the information and then either click BACK or SAVE and then the profile is gone. I am not sure this is the reason that my phone is not working, but I thought I would give it a try. I have also tried to use this tutorial: http://forum.xda-developers.com/show....php?t=2798566 as a loose guide, TWRP installed. Keep in mind that I believe that my firmware was rolled back to ZVE. and not ZVD. When I have tried to edit the build.prop values at the tutorial states it does not save. Also, there are two lines that are not even in my build.prop (ro.build.target_operator and persist.service.crash.enable). When I have tried to edit or add it adds them but does not save and definitely does not persist through reboot. I feel as if I am close to getting the phone to work, but I am unsure where to go from here. I really do NOT want to have to go back to a stock ROM and all of that because....well.... my friend did the rooting and installing of cyanogenmod and I don't want to risk undoing all of his work and having to pay $ to have it done all over again (I have rooted phones..etc, but this G2 was a MOFO because of the firmware patch for me). NET10 CS and TS was of no help and they gave me a ticket number (and to tell you the truth the are outsourced and I can't understand what their reps are saying). So, does anyone have any advice or threads that I can look at? Like I said, I feel as if it is close, but no matter what number I call it says that recording. I get no incoming calls (although it rings when listening to the incoming calling phone's speaker). I am also unable to send or receive SMS or MMS messages. Any help would be greatly appreciated. I am not the most technically savvy person, but I can answer your questions to the best of my ability and I am good at following directions. (I have about 5-6 phone root/ROMS under my belt and even 2-3 SPRINT to NET10 activations, but this one is just perplexing the crap out of me) . Could it be that the phone is not unlocked???? How do I check this??? Is there a way??? When I put in the NET10 SIM it never asked me for an unlock code so I am assuming that my friend unlocked it? I have also tried "Turn the phone ON and type 2945#801# If nothing happens, type 2945#802# or 2945#*803#" and no hidden menu appears asking for an unlock code.
You can unlock your Sprint phone for GSM but you can't activate it to Verizon or its MVNOs.

Categories

Resources