So my wife and I got some T-Mobile lg g4s on Monday. My phone doesn't seem to be having the issue, however my wife phone will not time the screen out when plugged in. I have turned the daydream feature off, adjusted the screen timeout to 15 seconds but it still stays on.
Any ideas?
Are developer settings enabled by any chance..?
Yea, try enabling Developer options and see if the box is ticked. There's an option for this exact behaviour.
the_scotsman said:
Yea, try enabling Developer options and see if the box is ticked. There's an option for this exact behaviour.
Click to expand...
Click to collapse
dude, your Post, and your Thanks Meter 0:
you are my idol :highfive::highfive::fingers-crossed:
Phurkus said:
dude, your Post, and your Thanks Meter 0:
you are my idol :highfive::highfive::fingers-crossed:
Click to expand...
Click to collapse
lol...there are some with more than me believe it or not! :laugh:
mine doesnt time out either
My screen does not time out either when plugged in but my developer options do not have the "stay awake" option checked. I am also having a problem with my screen turning off during phone calls and my hand isn't over the proximity sensor.
Related
I have a routine to plug in the phone when it's off into the chrager to speed up the chrage time and take a nap :silly:
Now, since the official jelly bean update that I jut recieved, I noticed that the phone stays on after I turn it off and plug it into AC.
It stays on all the charge time until I wake up to see that the phone wasn't turned off. It stays at the same state I 'turned if off' before the chraging.
That's weired because on ICS it didn't happend.
Seems that when you plug the chrager in after the screen turned black (after the shutdown routine of course) it stops shutting down and stay awake like nothing happend.
This thing doesn't happen if I plug the charger in after the phone is "off" for at least 1 minute. But if I plug it in earlier it stays on without a notice.
Anyone noticed this issue? It's annoying. I can't trust my phone to be powered off anymore
P.S: I don't use "Fast boot" option in battery settings menu.
Really? I'm the only one that have this issue? Cause I already unlocked my bootloader, installed custom rom after a full wipe and the issue still present. Please, can someone check if he has the same issue as mine?
tal_sarid said:
Really? I'm the only one that have this issue? Cause I already unlocked my bootloader, installed custom rom after a full wipe and the issue still present. Please, can someone check if he has the same issue as mine?
Click to expand...
Click to collapse
Nah dude, not the only one. By "turn off", I assume you mean the screen not shutting down the whole phone.
Easy solution: go to Settings > Power and there should be an option that says something along the lines of "never dim screen when charging." You can de-select this. There is also an option that says dim screen after x mins - you might like to put this on 1 or 2 mins if it isn't already.
VerRer1 said:
Nah dude, not the only one. By "turn off", I assume you mean the screen not shutting down the whole phone.
Easy solution: go to Settings > Power and there should be an option that says something along the lines of "never dim screen when charging." You can de-select this. There is also an option that says dim screen after x mins - you might like to put this on 1 or 2 mins if it isn't already.
Click to expand...
Click to collapse
Silly me. Didn't notice that option got ticked. Thanks! :good:
May be a dumb question, but any concerned with screen burn-in from charging? Under normal use the screen isn't lit up long enough, but while charging the screen stays lit (dimmed, yes but still lit) and with a static blue ring around the edge. Just seems odd that some kind of daydream mode isn't employed.
bob_loblaw_ said:
May be a dumb question, but any concerned with screen burn-in from charging? Under normal use the screen isn't lit up long enough, but while charging the screen stays lit (dimmed, yes but still lit) and with a static blue ring around the edge. Just seems odd that some kind of daydream mode isn't employed.
Click to expand...
Click to collapse
The screen is LCD not OLED so burn in isn't an issue.
I had it on the charger for about 2 hours last night and can clearly see the ring and the "moto" and "100%" text, especially on the gray background of the settings menu.
filefly said:
I had it on the charger for about 2 hours last night and can clearly see the ring and the "moto" and "100%" text, especially on the gray background of the settings menu.
Click to expand...
Click to collapse
That's my concern. I thought that LCD wasn't impervious just because it wasn't OLED and it is still susceptible to damage.
You can turn the screen off while charging if you just press the button (which is on top while charging).
slaydog said:
You can turn the screen off while charging if you just press the button (which is on top while charging).
Click to expand...
Click to collapse
Strange when I charged yesterday the screen did turn off. It is charging now and the button on top just dims.
Character Zero said:
Strange when I charged yesterday the screen did turn off. It is charging now and the button on top just dims.
Click to expand...
Click to collapse
I honestly can't figure this thing out, lol
It would appear that the last update keeps the screen on (although dim) while charging. Another change is that putting a turned off watch in the charger turns it on.
Well that solves my question. First charge was off, 2nd and current 3rd charge is staying dim. Thanks!
If you want it off when you charge, go into "Settings-->About" and tap on build number, repeatedly until it displays "You are now a developer". Then go back to "Settings-->Developer Options" and the first option is "Stay awake when charging". You can touch it to toggle between enabled and disabled.
jermaine151 said:
If you want it off when you charge, go into "Settings-->About" and tap on build number, repeatedly until it displays "You are now a developer". Then go back to "Settings-->Developer Options" and the first option is "Stay awake when charging". You can touch it to toggle between enabled and disabled.
Click to expand...
Click to collapse
just a heads up (for me anyway) - I wanted to have it ON when charging, so i did the dev mode option. Then i wanted to turn it off, and it seems disabling the option in dev options wont turn it off lol
early release wonkiness i assume
ameilius said:
just a heads up (for me anyway) - I wanted to have it ON when charging, so i did the dev mode option. Then i wanted to turn it off, and it seems disabling the option in dev options wont turn it off lol
early release wonkiness i assume
Click to expand...
Click to collapse
Thanks! Weird. I wonder if it needs a reboot to take affect?
jermaine151 said:
Thanks! Weird. I wonder if it needs a reboot to take affect?
Click to expand...
Click to collapse
tried everything - just gonna wait for an update and see from there
ameilius said:
tried everything - just gonna wait for an update and see from there
Click to expand...
Click to collapse
Once we get root we'll be able to change this option in the build.prop file:
Code:
ro.ambient.force_when_docked=true
To turn off the screen while charging:
1. Open the Android Wear app
2. Turn on "Always On" (if it's not already)
3. Wait for the screen on the watch to dim
4. Uncheck "Always On" in the Android App
The screen will turn off until it's taken off the charger, screen is tapped, or button is pushed.
dark79 said:
To turn off the screen while charging:
1. Open the Android Wear app
2. Turn on "Always On" (if it's not already)
3. Wait for the screen on the watch to dim
4. Uncheck "Always On" in the Android App
The screen will turn off until it's taken off the charger, screen is tapped, or button is pushed.
Click to expand...
Click to collapse
This worked for the LG G Watch as well. But you have to substitute "always on" with "ambient screen" with the update to 4.4w1.
kpjimmy said:
This worked for the LG G Watch as well. But you have to substitute "always on" with "ambient screen" with the update to 4.4w1.
Click to expand...
Click to collapse
Whoops. Forgot about the verbage difference in the Moto360.
Found this on reddit, looks like it answers my question. Curious to see if they had the screen left fully lit while charging.
http://www.reddit.com/r/moto360/comments/2gir11/charging_screen_image_burnin/
Tasker task I create to toggle the screen off automatically.
I've had it since Monday. Charging every night (~8 hours). Developer mode on, but no settings changed. No burn in. I think it's a defect.
So i don't know if this is because I just got a replacement device, but I put it on the charger and it's turning the screen off itself without going into the settings. I don't know if this is because it's saying "charge your battery" to update, but I'm not doing anything with ambient settings
Chickenboom said:
So i don't know if this is because I just got a replacement device, but I put it on the charger and it's turning the screen off itself without going into the settings. I don't know if this is because it's saying "charge your battery" to update, but I'm not doing anything with ambient settings
Click to expand...
Click to collapse
Mine came with the new update already on it and did the same thing. Search for how to enable developer mode and there is a toggle there to turn it on or off.
I'm all updated, but the option in developer mode doesn't work for me. I have to manually turn it off in Wear App every night.
Sent from my XT1080 using Tapatalk
osucowboy96 said:
I'm all updated, but the option in developer mode doesn't work for me. I have to manually turn it off in Wear App every night.
Click to expand...
Click to collapse
Same here.
I would reset your watch and resync it with your phone again. Give that a try.
Yeah, it's gone now have to do the settings again. Fyi, I was happy about this not mad. It must have been asking for the update that made it do this
It appears that enabling developer options somehow disables the screen off while charging option. The strange thing is that although the developer option menu has a toggle for this, it actually does not work.
With the latest S/W rev (4.4W.1) I can turn the screen off in the charger the same way I turn it off on my wrist - placing my palm on the screen momentarily turns it off. (This is with developer options enabled but no changes to the settings.)
Easy Peasy!
Edit: And apparently the result of S/W not operating as designed. My 360 dropped the connection to my phone recently so I restarted it. Since then the screen remains on during charging regardless of what I do.
Can't find another question like this one... so here goes:
Just got a Moto 360 for 149.99 USD and its great so far.
Did that force update to 5.1.1, this one worked for me: https://www.reddit.com/r/moto360/comments/3ahj1l/a_surefire_way_to_force_the_511_update/
Now I look into turning off the screen when its charging, only to run into a very strange issue...
In the developer options, which you can enable using 10 taps on the build number in about, there are two options:
1) stay awake while charging
2) burn-in protection
Burn-in protection will NOT save the check when your restart, so in essence, is useless.
However I found that using stay awake while charging DOES indeed turn off the screen, but here's the catch: you have to set it to ENABLED.
Don't believe I have ever seen a setting on android that required it to be on, to be off...
But hey, it does work, on mine at least.
Also the whole "just hit the button to make the screen go off" ONLY works in Theater Mode! And I personally dont like pushing a button to check the time.
If Theater Mode is off, it will just brighten the screen for around 2 seconds, then dim again.
Here's my question, what does that burn-in protection do anyways? Just pixel shift over time? Why can't it be enabled?
Hope this helps some people!
that setting does nothing for me
the screen stays awake regardless of ENABLED or DISABLED
funny how motorola hasn't fixed this yet
just put watch in "Theater mode" before charging
and it would switch the screen off on charger too
da_coder said:
Can't find another question like this one... so here goes:
Just got a Moto 360 for 149.99 USD and its great so far.
Did that force update to 5.1.1, this one worked for me: https://www.reddit.com/r/moto360/comments/3ahj1l/a_surefire_way_to_force_the_511_update/
Now I look into turning off the screen when its charging, only to run into a very strange issue...
In the developer options, which you can enable using 10 taps on the build number in about, there are two options:
1) stay awake while charging
2) burn-in protection
Burn-in protection will NOT save the check when your restart, so in essence, is useless.
However I found that using stay awake while charging DOES indeed turn off the screen, but here's the catch: you have to set it to ENABLED.
Don't believe I have ever seen a setting on android that required it to be on, to be off...
But hey, it does work, on mine at least.
Also the whole "just hit the button to make the screen go off" ONLY works in Theater Mode! And I personally dont like pushing a button to check the time.
If Theater Mode is off, it will just brighten the screen for around 2 seconds, then dim again.
Here's my question, what does that burn-in protection do anyways? Just pixel shift over time? Why can't it be enabled?
Hope this helps some people!
Click to expand...
Click to collapse
It started on mine, in the dock. Every few minutes everything on the display jumps in size from small to large and vice visa
The staying awake feature is backwards. Crazy
Sent by entanglement.
I restarted mine after setting to enabled, also ambient / theater mode are both off.
Hi,
as ShadowVlican wrote: just enable the theater mode to switch the screen off during charging. It is also important, the you undo any changes you did in the developer menu ("stay awake while charging" and the "burn in protection" as well).
Stephan
cyvr1 said:
Hi,
as ShadowVlican wrote: just enable the theater mode to switch the screen off during charging. It is also important, the you undo any changes you did in the developer menu ("stay awake while charging" and the "burn in protection" as well).
Stephan
Click to expand...
Click to collapse
Yeah, no. My screen turns off for 10 seconds then just becomes dim black with backlight again.
Is there no damn working solution?!
Hey Guys,
So something very annoying I've noticed so far since owning this phone. I could have it laying on the table/counter, whatever. I have lift to wake and any other motion related setting to turn the screen on disabled, however, if I so much as nudge my phone while it's sitting the screen will always wake. Does this happen to anyone else? Is there some other hidden setting I've yet to disable and need to? Is it a glitch or something? Appreciate any ideas or suggestions.
Thanks!
You are not the only one observing this behavior. I believe it's a software glitch. It's has been mentioned on other forums as well.
I don't think it's a glitch. People have said the "fix" is to turn off fingerprint option. So I'm thinking it's actually a feature to turn on the screen so it's ready for your finger print. It's different than lift to wake because it only shows the Always On Display. Lift to wake, goes past the Always On Display and to the lock screen. I've tested it in my pocket and it's stays fully off.
EeZeEpEe said:
I don't think it's a glitch. People have said the "fix" is to turn off fingerprint option. So I'm thinking it's actually a feature to turn on the screen so it's ready for your finger print. It's different than lift to wake because it only shows the Always On Display. Lift to wake, goes past the Always On Display and to the lock screen. I've tested it in my pocket and it's stays fully off.
Click to expand...
Click to collapse
It's a feature not a bug
There is doze_quick_pickup_gesture option that you can set via adb. Just setup adb shell (google how to do it if you don't have it), then enable developer options on your phone (google it too), then connect your phone to your PC and execute this command in the shell:
shell settings put secure doze_quick_pickup_gesture 0
It worked for me! Borrowed from here:
Google Pixel 6/6 pro screen wakes up automatically? - Google Pixel Community
sb283 said:
shell settings put secure doze_quick_pickup_gesture 0
Click to expand...
Click to collapse
You absolute beast, thanks!
The easiest fix is to turn off adaptive sound
manueltimz said:
The easiest fix is to turn off adaptive sound
Click to expand...
Click to collapse
Interesting. I noticed that my AOD is always on, even though I have set it to be disabled when charging.
Maybe Adaptive Sound has something to do with that? 'Cuz I enabled that.
Morgrain said:
Interesting. I noticed that my AOD is always on, even though I have set it to be disabled when charging.
Maybe Adaptive Sound has something to do with that? 'Cuz I enabled that.
Click to expand...
Click to collapse
Yes i think its a bug when adaptive sound is on and it hears loud sounds, ot turns the screen on. Just try banging the desk or hitting two spoons when near your phone with adaptive sound on and off... The screen lights up when its ON bit doesn't when its off
I am having just the opposite effect. I lift my phone and nothing happens. I have to click my power button for it to go on sometimes.
If you refer to Lift to check BLACK SCREEN It is a feature for easy to use fingerprint so that very helpful for me
pettigrew95 said:
Hey Guys,
So something very annoying I've noticed so far since owning this phone. I could have it laying on the table/counter, whatever. I have lift to wake and any other motion related setting to turn the screen on disabled, however, if I so much as nudge my phone while it's sitting the screen will always wake. Does this happen to anyone else? Is there some other hidden setting I've yet to disable and need to? Is it a glitch or something? Appreciate any ideas or suggestions.
Thanks!
Click to expand...
Click to collapse
Check out #9
Can't disable Lift To Wake
The screen turns on when I lift the phone. (Black and white lock screen.) "Lift to wake" and "Tap to Check" are both off.
forum.xda-developers.com
sb283 said:
There is doze_quick_pickup_gesture option that you can set via adb. Just setup adb shell (google how to do it if you don't have it), then enable developer options on your phone (google it too), then connect your phone to your PC and execute this command in the shell:
shell settings put secure doze_quick_pickup_gesture 0
It worked for me! Borrowed from here:
Google Pixel 6/6 pro screen wakes up automatically? - Google Pixel Community
Click to expand...
Click to collapse
This worked perfectly, thanks so much! Quick question, is there any negative or other effects this has? Thanks again.
pettigrew95 said:
This worked perfectly, thanks so much! Quick question, is there any negative or other effects this has? Thanks again.
Click to expand...
Click to collapse
I haven't noticed any, around 24 hrs later.
manueltimz said:
The easiest fix is to turn off adaptive sound
Click to expand...
Click to collapse
If a moth farts 2 miles away causing the slightest vibration my screen comes on and i have adaptive sound, lift to wake and AOD disabled.