Develop Bugs

Sprint L710 --> Verizon prepaid

So finally got it worked on Verizon prepaid. Can say it works perfect, perhaps first day, 3G works well.
In that case I have a few questons.
If I flash new Kernel, will it affect on my Verizon service at sprint's L710?
In total what I MUST NOT flash to keep Verizon working on my phone?

How dis you flash it to verizon prepaid?

Same way like to Boost or others with donored Verizon ESN it works well.
As for Tutorial, I'm not a specialist in that question but can help to write it if there are few sources.

Assuming it's like every other flashed service providers, flashing roms and kernels will not affect anything except maybe your ability to send mms. Just don't do a ##786# factory reset using a touchwiz rom because that will clear out your MDN/MSID and AAA Hex keys.

There's no way I'd be on Verizon for their 3g.

beserker15 said:
Assuming it's like every other flashed service providers, flashing roms and kernels will not affect anything except maybe your ability to send mms. Just don't do a ##786# factory reset using a touchwiz rom because that will clear out your MDN/MSID and AAA Hex keys.
Click to expand...
Click to collapse
Thanks a lot, MMS is the least of what I'm worried.

Ascertion said:
There's no way I'd be on Verizon for their 3g.
Click to expand...
Click to collapse
bon courage !
-------------------
Voyage en Vietnam-Voyage au Vietnam-Jonque Classic sails Halong

can you point me in the right direction to get verizon settings? i have the software just need the correct settings for data and prl. thanks

blackhand901 said:
can you point me in the right direction to get verizon settings? i have the software just need the correct settings for data and prl. thanks
Click to expand...
Click to collapse
no problem
just tell me how can i get it? what software I need?
i have qpst 2.7 b 378;
qxdm 03.12.714
dfs 4.0.0.4
can't figure out how to connect phone to it.. put phone to debugging, and soft doesn't recognize it

You should try dfs. It connects to the gs3. I'm) poking for the settings to change. Sort of a step by step. There are plenty for cricket and boost. Just in can't find any for Verizon. I'm sure the steps are similar in just need the specific strings to put in.
Sent from my galaxy s3

Yes it connects.
Well, if you tell me where to look into DFS i'll provide you settings that you need.

In dfs look in Ports->diagnostic
I'm not sure we can post this stuff on xda. I know the guides have been deleted before.
Sent from my galaxy s3
---------- Post added at 04:26 PM ---------- Previous post was at 04:23 PM ----------
I need the info from the data tab
Sent from my galaxy s3

Thanks got it.
PAP
UID
[email protected]
PPP
SIP NAI
[email protected]
UID
[email protected]
PWD
??5(?|:3??
?z?
HDR AN
UID
[email protected]
HDR AN LONG
UID
[email protected]
But in ##data#
Primary HA IP
255.255.255.255
Secondary
68.28.113.76
EVDO
DDTM OFF (should it put it on?)
at others
MMSC
mms.sprintpcs.com (do not know what to put for verizon)
DSS
sprint server
seems like that guy made just half of his job

Can you check your pm?
Sent from my galaxy s3

Sorry, didn't see.
Well yesterday everything was good on 3g, but when I flashed CM10 I lost data connection, now I come back to stock but there is still some issues with data and Sprint icon appearing, sometimes I get 67 Error Registration to sprint failure.
I checked ##data, there is a lot of settings belong to Sprint. Also now i noticed that 3g speed too slow, i tried speedtest and got 120 down/150 up via speedtest, its not what I got yesterday before CM10. Also phone sometimes looses connection. Think something went wrong while I flashed CM10 or that guy didnt set all proper settings.
Averything txt/call/data work, but some issues I still have to solve...
Does somebody have some info what alse to change in settings?

Ill just stick to Speint instead of going thru all of that trouble to get prepaid.

Headed to get a gusto donor phone. Did you get the 3g worked out?
Sent from my galaxy s3
---------- Post added at 04:05 PM ---------- Previous post was at 04:00 PM ----------
Silly question...do I activate the donor phone prior to starting?
Sent from my galaxy s3

DroidBabe said:
Ill just stick to Speint instead of going thru all of that trouble to get prepaid.
Click to expand...
Click to collapse
I flashed my Epic Touch to Virgin and now I pay $55 instead of $110 and get same service because Virgin is owned by Sprint and uses same towers

blackhand901 said:
Headed to get a gusto donor phone. Did you get the 3g worked out?
Sent from my galaxy s3
---------- Post added at 04:05 PM ---------- Previous post was at 04:00 PM ----------
Silly question...do I activate the donor phone prior to starting?
Sent from my galaxy s3
Click to expand...
Click to collapse
No I did not. Cause I have no AAA/HA codes.
Also I can't flash zeros to SPC that's why I have no possibility to flash it over the air to Verizon.

No luck so far. I have done everything but i have the roaming sign. I cant make a call or text. Can you maybe post a screenshot of your tabs in dfs? I figure that would be easier than typing your values. When i try to make a call i get the verizon operator only. Im did not flash a verizon radio or anything. Not sure if thay matters.

[MOD](WIP) Add 3g/ipv4 support + more (update.zip)

I don't have much time so Ill revisit this later and give it more details
What this update zip does
add apns
allow edit of default apn
allow edit of tether apn
add 3G
add ipv4 option (and actually work)
proper icons (E, 3G, H and 4G)
all network modes visible (probably not needed but added anyway)
TETHER BROKE FOR NOW
MAKE SURE YOU HAVE A NANDROID BEFORE YOU FLASH (works for me might not for you)
THIS REPLACES THE BUILD.PROP SO ANY PREVIOUS BUILD PROP MODIFICATIONS WILL BE LOST USE WITH CAUTION
If you want to use this with your modified build prop check back in a few days or take a look at the build prop inside the zip.
Reboot into twrp
Install apn_mod.zip
Wipe cache/dalvik (do not skip this)
Reboot system
Tell me if you get stuck in 3g I think I fixed that bug but not 100% sure (temp fix: open network mode and select GSM/WCDMA/LTE)
DOWNLOAD HERE

ThePagel said:
I don't have much time so Ill revisit this later and give it more details
What this update zip does
add apns
allow edit of default apn
allow edit of tether apn
add 3G
add ipv4
proper icons (E, 3G, H and 4G)
all network modes visible (probably not needed but added anyway)
MAKE SURE YOU HAVE A NANDROID BEFORE YOU FLASH (works for me might not for you)
THIS REPLACES THE BUILD.PROP SO ANY PREVIOUS BUILD PROP MODIFICATIONS WILL BE LOST USE WITH CAUTION
If you want to use this with your modified build prop check back in a few days or take a look at the build prop inside the zip.
Reboot into twrp
Install apn_mod.zip
Wipe cache/dalvik (do not skip this)
Reboot system
Tell me if you get stuck in 3g I think I fixed that bug but not 100% sure (temp fix: open network mode and select GSM/WCDMA/LTE)
DOWNLOAD HERE
Click to expand...
Click to collapse
What is the benefit of this mod?

jimmydigital00 said:
What is the benefit of this mod?
Click to expand...
Click to collapse
Honestly if you need to ask you probably wont benefit from it. But you can change the default tether apn to fast instead of pcweb + 3g + mega apn pack. I need ipv4 for my vpn to work properly and not leak my ip but there are lots of reasons to use ipv4 instead of ipv6.

This is awesome. could you possibly add lte/wcdma to the network modes? I can get the option in the hidden menu through the dialer, would love an option for it in the network mode menu.
Sent from my LG-D851 using XDA Free mobile app

Harmtan2 said:
This is awesome. could you possibly add lte/wcdma to the network modes? I can get the option in the hidden menu through the dialer, would love an option for it in the network mode menu.
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
Ill look into it

jimmydigital00 said:
What is the benefit of this mod?
Click to expand...
Click to collapse
When Roaming IPV6 doesn't work that well. I had to create another APN so I could connect to the roaming network. Even that was a little finicky. This will come in handy when going to Wyoming to visit the Family.
ThePagel said:
Ill look into it
Click to expand...
Click to collapse
Thanks! definitely buy you a beer for it.

Does this have any effect if we're using att?
Sent from my LG-D851 using Tapatalk

Skizzy034 said:
Does this have any effect if we're using att?
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Probably not unless you are only seeing 2g and 4g lte if that is so you will see e/3g/lte after flashing this. but you can just go in the build prop and edit that in. I will try to update the op tonight with details but probably wont get to it until tomorrow. I guess if you already see e/3g/4g you will get a lot of apns from around the world with this package.
*Edit*
can you get ipv4 apn to work properly with this phone on att? I dont mean ipv4/ipv6 but the real ipv4? if not that would be another benefit for you if you care for ipv4.

It shows ipv4 in the APN, but I never see 3g, just LTE, 4g, and a couple times 2g.
Sent from my LG-D851 using Tapatalk

Skizzy034 said:
It shows ipv4 in the APN, but I never see 3g, just LTE, 4g, and a couple times 2g.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
yeah then you would only be getting apns from this. If you are interested in that I'm going to make a apn only package tomorrow for the zone people.
*Edit*
sorry didn't see you don't get 3G if this phone supports that band (I think it does) you should get 3g from this.
*edit
but that's just a simple build prob edit Ill have that in the op tomorrow

So this actually changes the tethering APN for the stock tethering app?
Does it also replace framework-res then?
Sent from my Nexus 7 using XDA Premium HD app

sdjkfjjlljk

This should help out with VPN and torrents. Checking it out now!

Does this removes the 5GB cap of tether use on T-Mobile ?
Thanks

VPN works now, that's awesome. Still not able to download torrents though, oh well. Nice work!

Hay boss do you have to make the changes to the build.prop for this to work? Reason is it cause poor signal and 4G to drop in and out. At least it does on my device. Had the same problem with those edits on the G2.

UltimateEnd said:
Does this removes the 5GB cap of tether use on T-Mobile ?
Thanks
Click to expand...
Click to collapse
If you can get your tethering to work with the fast.t-mobile.com APN, data will not be counted as tethered data.
behappy said:
VPN works now, that's awesome. Still not able to download torrents though, oh well. Nice work!
Click to expand...
Click to collapse
I never tried VPN before, what was broken about it?

havanahjoe said:
If you can get your tethering to work with the fast.t-mobile.com APN, data will not be counted as tethered data.
Click to expand...
Click to collapse
I'm not sure that works. That's the default setting.

havanahjoe said:
I never tried VPN before, what was broken about it?
Click to expand...
Click to collapse
I use PIA and it isn't compatible with ipv6, only ipv4.

ThePagel;54618716
Tell me if you get stuck in 3g I think I fixed that bug but not 100% sure (temp fix: open network mode and select GSM/WCDMA/LTE)
[/QUOTE said:
No 3G bug since I flashed this last night.
Last night I noticed my tether is broken, but I didn't know why. My computer will not connect to the hotspot and will complain that the signal is low.
I did some debugging and found this:
I/hostapd ( 3179): wlan0: AP-STA-MAX-REACHED
The phone is not allowing the client to connect because it thinks the max has been reached. It's not a build.prop thing, I couldn't find it there.
Doing some more digging, I found that the hostapd.conf file that is generated when the hotspot is on (/data/misc/wifi/hostapd.conf) has max_num_sta=0 even though I have set it to 8 on the Settings Menu. I have changed the settings to something else and this always comes up as 0.
I also see some errors about some config files not being setup properly:
Code:
E/hostapd (31402): Configuration file: /data/misc/wifi/hostapd.conf
E/hostapd (31402): Invalid MAC address '/data/misc/wifi/hostapd.accept' at line 1 in '/data/misc/wifi/hostapd.accept'
E/hostapd (31402): Line 15: Failed to hostapd_config_read_maclist '/data/misc/wifi/hostapd.accept' at config_file.c
Not sure where this config_file.c is, probably in the code of the hostapd binary.
I don't think I had seen hostapd being used in the stock tethering, but I wasn't really looking for it when debugging previously.
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
UltimateEnd said:
I'm not sure that works. That's the default setting.
Click to expand...
Click to collapse
The stock firmware has a hidden tethering APN, which is pcweb.tmobile.com. Using this zip allows you to change the tethering APN. If that one is configured as fast, then you should be good to go. Is your tethering working with this patch? Mine isn't
---------- Post added at 05:59 PM ---------- Previous post was at 05:58 PM ----------
behappy said:
I use PIA and it isn't compatible with ipv6, only ipv4.
Click to expand...
Click to collapse
Oh that's right. I forgot you had that issue. So did you set your phone's APN to IPV4 only to make it work?
Click to expand...
Click to collapse

Hotspot performance

Hi, I live in a metropolitan area with generally good LTE signal (t-mobile/usa), and before the OPO3 I had HTCs, nexuses and a Z3. And I use the WiFi hotspot a lot. All the handsets in the past few years had performed surprisingly really well - same service, same place - i could stream HD youtube since 2010.
This one though is barely loading pages. Everything else works great. Is this normal?

when u r connected via ur mobile hotspot have u done the speed test through the device u r connected to and see what speeds u r getting
---------- Post added at 05:11 AM ---------- Previous post was at 04:58 AM ----------
not as good as urs

it's like riding a comet..
oh and that verizon IP is there because i couldn't even load the test page, so i had to load it on my wifi, but i tested it connected through the phone

Do you have "binge on" enabled on your T-Mobile account?
Sent from my SM-T320 using Tapatalk

DualSportDad said:
Do you have "binge on" enabled on your T-Mobile account?
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
Not that I know of - i never enabled it, and didn't know it's something that can be enabled/disabled. But if I stick my simcard into my old Z3 it works exponentially better..

What apn are you using?

Thx

why is it on cdma, I am on tmobile and its gsm definitely should not say cdma and I am also on IPV6 with no tethering issues that I am aware of

playya said:
why is it on cdma, I am on tmobile and its gsm definitely should not say cdma and I am also on IPV6 with no tethering issues that I am aware of
Click to expand...
Click to collapse
I'm not on CDMA.. See screenshot - I'm on CDMA/GSM/LTE..etc - so all technologies, and the protocol is ipv4/ipv6 so also both. Or which settings are you talking about?
Can you look at yours?

ctakah27 said:
I'm not on CDMA.. See screenshot - I'm on CDMA/GSM/LTE..etc - so all technologies, and the protocol is ipv4/ipv6 so also both. Or which settings are you talking about?
Can you look at yours?
Click to expand...
Click to collapse
I did look at mine nowhere does it say CDMA on my network type that's what I am telling you

playya said:
I did look at mine nowhere does it say CDMA on my network type that's what I am telling you
Click to expand...
Click to collapse
So what do you have for network type - just GSM? No LTE?

ctakah27 said:
So what do you have for network type - just GSM? No LTE?
Click to expand...
Click to collapse
LTE (recommend)

Ok thanks I'll try it!

playya said:
LTE (recommend)
Click to expand...
Click to collapse
Ha so LTE gives me really slow data.. without even getting to the hotspot, I just switched it and it's like being on dialup.. Also why did you decide to set it to LTE?
Is it possible that we have different radios? This is what my network selections look like..

ctakah27 said:
Ha so LTE gives me really slow data.. without even getting to the hotspot, I just switched it and it's like being on dialup.. Also why did you decide to set it to LTE?
Is it possible that we have different radios? This is what my network selections look like..
Click to expand...
Click to collapse
That's what comes up always had it there and I get like 50+ at times. I never set it to the CDMA setting since I am on T-Mobile. I am also running stock no root
---------- Post added at 06:44 PM ---------- Previous post was at 06:40 PM ----------
ctakah27 said:
Ha so LTE gives me really slow data.. without even getting to the hotspot, I just switched it and it's like being on dialup.. Also why did you decide to set it to LTE?
Is it possible that we have different radios? This is what my network selections look like..
Click to expand...
Click to collapse
in the middle screen shot your choice should be the last one gsm/wcdma/lte

Do you have two sim card loaded? I have T-Mobile and I only have 2G, 3G and LTE option.
Edit: I was on epic.tmobile. changed to fast.tmobile and LTE ipv6. Maybe I'll get better data now. If I do, I have to retract my statement about slow data.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

playya said:
That's what comes up always had it there and I get like 50+ at times. I never set it to the CDMA setting since I am on T-Mobile. I am also running stock no root
---------- Post added at 06:44 PM ---------- Previous post was at 06:40 PM ----------
in the middle screen shot your choice should be the last one gsm/wcdma/lte
Click to expand...
Click to collapse
Yep - that did it, thank you!

Mine is super slow also. Speed test on my phone give me 40MB/s while on hotspot I get less then 1...

vwgti18 said:
Mine is super slow also. Speed test on my phone give me 40MB/s while on hotspot I get less then 1...
Click to expand...
Click to collapse
We've resolved it look at the post above yours

ctakah27 said:
Ha so LTE gives me really slow data.. without even getting to the hotspot, I just switched it and it's like being on dialup.. Also why did you decide to set it to LTE?
Is it possible that we have different radios? This is what my network selections look like..
Click to expand...
Click to collapse
Where do u see this menu? I can't seem to find it.

Data connection switch 2G/3G/4G missing

Hello guys.
I need another tip as I am not running AT&T network in Europe I wanted to ask you if you are able to switch manually between network types 2G/3G/4G. The phone connects me to 4G regardless to how bad the reception is, and in that areas I want to be able to swotch from 4G to 3G.
Does any of you have a solution for this item?
Your responses will be appreciated.

catalindobre said:
Hello guys.
I need another tip as I am not running AT&T network in Europe I wanted to ask you if you are able to switch manually between network types 2G/3G/4G. The phone connects me to 4G regardless to how bad the reception is, and in that areas I want to be able to swotch from 4G to 3G.
Does any of you have a solution for this item?
Your responses will be appreciated.
Click to expand...
Click to collapse
As far as I've ever known, the only way to really impact that without root would be to change APN settings. I can't really provide specifics on this device, but there definitely isn't a quick and easy way to toggle between them.

disturbd1 said:
As far as I've ever known, the only way to really impact that without root would be to change APN settings. I can't really provide specifics on this device, but there definitely isn't a quick and easy way to toggle between them.
Click to expand...
Click to collapse
catalindobre said:
Hello guys.
I need another tip as I am not running AT&T network in Europe I wanted to ask you if you are able to switch manually between network types 2G/3G/4G. The phone connects me to 4G regardless to how bad the reception is, and in that areas I want to be able to swotch from 4G to 3G.
Does any of you have a solution for this item?
Your responses will be appreciated.
Click to expand...
Click to collapse
Actually all you haveto do is go to your dialer pad and punch in the dialer pad this sequence tight here exactly as shown....*#*#4636#*#* and go to phone info and scroll down and you will see the network mode selection...I m going to post a screenshot for you

raver445 said:
Actually all you haveto do is go to your dialer pad and punch in the dialer pad this sequence tight here exactly as shown....*#*#4636#*#* and go to phone info and scroll down and you will see the network mode selection...I m going to post a screenshot for you
Click to expand...
Click to collapse
I 've found myself this solution after google it. Thank you! I wonder if there is a solution for a toggle in the notification bar.

catalindobre said:
I 've found myself this solution after google it. Thank you! I wonder if there is a solution for a toggle in the notification bar.
Click to expand...
Click to collapse
There isn't any other solution and there is no root available for this thing it's very lockdown so unless someone comes up with something you will just have to do the method I showed you
Sent from my SAMSUNG-SM-G891A using Tapatalk

raver445 said:
There isn't any other solution and there is no root available for this thing it's very lockdown so unless someone comes up with something you will just have to do the method I showed you
Sent from my SAMSUNG-SM-G891A using Tapatalk
Click to expand...
Click to collapse
At least we still have this solution.

catalindobre said:
At least we still have this solution.
Click to expand...
Click to collapse
Yes because the att version has to be rooted and the bootloader unlocked for any modifications to take place
Sent from my SAMSUNG-SM-G891A using Tapatalk

Should we dream to that moment?

catalindobre said:
Should we dream to that moment?
Click to expand...
Click to collapse
For right now yes because I've checked every possible venue no root is possible at this time
Sent from my iPhone using Tapatalk

Thanks a lot!!!
raver445 said:
Actually all you haveto do is go to your dialer pad and punch in the dialer pad this sequence tight here exactly as shown....*#*#4636#*#* and go to phone info and scroll down and you will see the network mode selection...I m going to post a screenshot for you
Click to expand...
Click to collapse
You saved me from selling my beloved S7 Active! After searching (camo green, unlocked) from about 2 months, I bought it a week ago. I'm using "MINT SIM". So on default network settings, I'm fine outdoor, but indoor situation is horrible, it keeps me in LTE (barely 1 bar). So calls were getting disconnected. I don't care about data in my house, as I'm on WIFI all the time. Now, from your provided code, I selected 'Global Auto' and I'm getting ALL bars of network! It is connecting me to UMTS automatically! Data speed good enough for me! I don't have to sell it anymore! Thanks a lot!!

catalindobre said:
Hello guys.
I need another tip as I am not running AT&T network in Europe I wanted to ask you if you are able to switch manually between network types 2G/3G/4G. The phone connects me to 4G regardless to how bad the reception is, and in that areas I want to be able to swotch from 4G to 3G.
Does any of you have a solution for this item?
Your responses will be appreciated.
Click to expand...
Click to collapse
QuickShortcutMaker > Hidden Network Setting > All GSM

mddj said:
QuickShortcutMaker > Hidden Network Setting > All GSM
Click to expand...
Click to collapse
A very fast response I've sold the phone only 4 years ago ).

)))
I solved this problem for the customer today. Found this forum. Replied. May be useful for the next generation %)

catalindobre said:
A very fast response I've sold the phone only 4 years ago ).
Click to expand...
Click to collapse
)))

apn settings on sm-976v

I jave a verizon note 10 plus. I want to switch to straight talk. The voice and text works but the mms and data do not. I tried to update the apn but unable to. Any insight to this?

Has Verizon unlocked it?
Sent from my SM-N975U1 using Tapatalk

Verizon unlocks its devices after 60 days.
Sent from my SM-N976V using Tapatalk
---------- Post added at 04:58 PM ---------- Previous post was at 04:54 PM ----------
tgrantjr said:
I jave a verizon note 10 plus. I want to switch to straight talk. The voice and text works but the mms and data do not. I tried to update the apn but unable to. Any insight to this?
Click to expand...
Click to collapse
How long have you had the device? If less than 60 days you're going to have to call Verizon.
If over 60 days.
Which Straight Talk SIM did you use? If I remember correctly, Straight Talk includes different SIMs for each network in its packaging.
You may need to call Straight Talk.
Sent from my SM-N976V using Tapatalk

They did not unlock it and I've had it over a year. They have a verizon sim that can make and receive calls and text. We can't send or receive mms and have no data connection. I try to get the proper apn and it says the user cannot make changes and everything is grayed out.

tgrantjr said:
They did not unlock it and I've had it over a year. They have a verizon sim that can make and receive calls and text. We can't send or receive mms and have no data connection. I try to get the proper apn and it says the user cannot make changes and everything is grayed out.
Click to expand...
Click to collapse
Then call Verizon. Verizon SIM unlocks its devices after 60 days. It's automatic.
Sent from my SM-N976V using Tapatalk

Probably need to flash unlocked firmware so you have full access to all the settings like apn and such
---------- Post added at 08:04 AM ---------- Previous post was at 07:43 AM ----------
From the way you've described. You cannot even put in apn settings?

Called Verizon and they said its unlocked and I cant change those settings even after the phone is unlocked so I'm screwed. There is no way for me to root and put custom firmware on it to edit that. I have a paperweight

tgrantjr said:
Called Verizon and they said its unlocked and I cant change those settings even after the phone is unlocked so I'm screwed. There is no way for me to root and put custom firmware on it to edit that. I have a paperweight
Click to expand...
Click to collapse
Then you need to call Straight Talk. The issue is with them, or you used the wrong SIM. Straight Talk includes multiple SIMs in its packaging because it supports all four (three?) of the US carriers.
You can also check to see if your phone will work:
https://www.straighttalk.com/wps/po...JYrUewB8OA5yPmrdwirLHecGR_lY5Q!!/#KNOWCARRIER
Sent from my SM-T727V using Tapatalk