Develop Bugs

Rogers Galaxy S3 - No more LTE w/ Stock ROM?

Hi everyone,
So, I've got an interesting issue, and I realize that it is likely my fault. I was flashing various ROM's (CM10, CM9 etc) on the phone, and eventually when I put the stock ROM back on, I was only able to connect on "EDGE". I called Rogers and they said my account checked out. So, I did more ttroubleshooting, and in that I noticed that my IMEI was set to "0". So, I found a guide on here to re-add the IMEI using QPST and I was able to get back on 3G, but no 4G/LTE. After rebooting and some time passed, I am now on 4G, but no LTE and this is my issue. Before you say 4G is LTE, I tend to want to disagree. I used to get LTE, and I did see it pop up once since I fixed the phone, but the phone crashed and i wasn't able to test it with LTE running. Since then, I haven't seen it again. I also ran the "Phone Info" app, and if I set it to LTE only, I never get a data connection, even after rebooting, pulling battery etc.
Why I think 4G is not LTE is because when I ran speedtests before I broke my phone, I was getting 28MB down, and 8-10MB up. now, I'm lucky if I'm getting 1MB down and .2MB up. I have once gotten 4MB down, and .8MB up, but this is WELL below LTE speeds that I've had in the past.
I'm hoping someone might be able to help me get back to a 100% clean, stock ROM, modem, firmware etc. I have installed 2 different stock ROM's that I found for the Rogers i747m; one is ~700MB, the other is 1.2GB. Both have the same issue with 4G only. I've also flashed the stock Rogers modem, and still no luck.
Any help would be appreciated, but here are some specific questions if you can help.
Does anyone have screenshots of their stock "about" page, and the "status" page in the phone menu?
Does anyone have a bone stock "complete" firmware/ROM for the Rogers i747?
Is there anything I can do to fix this on my current ROM (stock)?
Thank you!
Here are the threads I've reviewed and followed to try and resolve the issue.
http://forum.xda-developers.com/showthread.php?t=1747200
http://galaxys3root.com/galaxy-s3-unroot/how-to-unroot-canadian-galaxy-s3-sgh-i747m-stock-roms/ (using the Rogers ROM)
http://forum.xda-developers.com/showthread.php?p=29462530#post29462530 (To restore IMEI)

Well I know you are right about one thing when it says 4g it's not the same as LTE mine says LTE when it's on LTE. I'm on Telus though. I have seen others in Canada with this issue after restoring the IMEI, maybe you should check that thread to see if there are any solutions.

Halmo said:
Well I know you are right about one thing when it says 4g it's not the same as LTE mine says LTE when it's on LTE. I'm on Telus though. I have seen others in Canada with this issue after restoring the IMEI, maybe you should check that thread to see if there are any solutions.
Click to expand...
Click to collapse
I ran through every post in that thread, but still no LTE. Man this is driving me crazy. I'll pay someone if they can help me get LTE back... I've already restored the QCN info using the QCN creator posted in one of the threads.

What do you have for your APN settings?

Motokorth said:
What do you have for your APN settings?
Click to expand...
Click to collapse
Thanks for replying. The apn settings are correct, ltemobile.son and the tethering one. This was one of the first things I checked. I'll add screenshots tomorrow if it's helpful
Thanks!

Interesting...got on LTE randomly...well sort-of
SkydiverChris said:
Thanks for replying. The apn settings are correct, ltemobile.son and the tethering one. This was one of the first things I checked. I'll add screenshots tomorrow if it's helpful
Thanks!
Click to expand...
Click to collapse
So, here's something a bit more interesting. Just before bed last night, I caught my phone on the LTE network. I tried loading a few pages/apps, but nothing was working. AFter about a minute, I lost all data connection and it popped back up about 10 seconds later back on 4G and was working again. Not sure if this helps anything, but I did grab a screenshot when it was on LTE.
Anyone?

http://forum.xda-developers.com/showthread.php?t=1826409

RayoMax said:
http://forum.xda-developers.com/showthread.php?t=1826409
Click to expand...
Click to collapse
Thanks for that thread, but does anyone know why the person is removing the SIM and going through all that trouble when rebooting does the exact same thing?
I have used the #2263 menu to set my phone into LTE only mode, and I get no data connection, nor any cell connection either. Switch it back to Automatic and it jumps right back on 4G.

It is faster to remove the sim and enter *#2263# code lol. Once the sim is removed, a no sim notification should appear. Better than waiting for you phone to reboot.
I will post my lte apn setting for you. Hopefully that will help.
Name
Rogers LTE
APN
ltemobile.apn
Proxy
Not Set
Port
Not Set
Username
Not Set
Password
Not Set
Server
Not Set
MMSC
ttp://mms.gprs.rogers.com
MMS proxy
10.128.1.69
MMS Port
80
MCC
302
MNC
720
Authentication Type
None
APN type
default,mms,supl
APN protocol
IPv4
Enable/disable APN
APN enabled
Bearer
Unspecified
---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------
MMSC
ttp://mms.gprs.rogers.com
There is obviously a h before ttp:// lol. I am still a new member and can't link "websites" yet.
---------- Post added at 08:40 PM ---------- Previous post was at 08:33 PM ----------
It could also be the modem... I have a link to a stock rogers modem. Just flash in recovery and you may have LTE again. http://forum.xda-developers.com/showthread.php?p=29517422&highlight=rogers#post29517422

Just fyi...
I also have a Rogers S3 and noticed that I am not getting the LTE icon on the notification bar after the first week. Now, I only get a 4G icon in GSM, HSDPA, LTE mode, and 3G/H+ in GSM, HSDPA mode.
However, with the 4G icon, I can still get speeds of 30Mbps down, 13 Mbps up, and under System Information, it shows LTE in Network Type.
My conclusion was that dont rely on the icon in the notification bar. Check the system information page to see the actual network type.
The only time I can get the LTE icon to actually show when I am connected to the LTE network instead of the 4G icon is through re-flashing the ROM. I have tried clearing the cache through recovery menu and it still wont work.
I know this doesnt solve your issue, but I hope this will help anyone that stumble across this problem.
Cheers

Thanks for posting all of that. My APN settings are the same, except the APN type. Mine is set to "Internet + MMS". If I change it, I am prompted with a menu to choose from and the settigns on yours are not in the list. Basically it has the folllwing list:
Internet + MMS + DUN
Internet + MMS
Internet + DUN
INternet
MMS
DUN
Also, flashing the Rogers Modem was probably one of the first things I did. I thought that would have been most likely.
My mobile Network type is UMTS:3 and I am definately not getting LTE speeds. I've heard people say that they only see the 4G icon, but get LTE speeds, but I'm only getting about 5down, and less than 1 up. I say that when I was on another ROM, it showed 4G, but seemed much quicker. Now I'm just hosed.
Out of curiosity, under the system settings, what do you have listed for ERI Version and IMEI SV?
Thanks!
Any other ideas?

Mine show ERI Version: Not Available
IMEI SV:01
Hope that help you.
Side note: I also note that for reasons of economy of battery when I switch to GSM network and I want to return to the lte network, it takes a long time to show me the lte icon....it's seem to stuck a few minutes on the edge even if gsm/hspa/lte(auto mode) is selected.

duchkata said:
Mine show ERI Version: Not Available
IMEI SV:01
Hope that help you.
Side note: I also note that for reasons of economy of battery when I switch to GSM network and I want to return to the lte network, it takes a long time to show me the lte icon....it's seem to stuck a few minutes on the edge even if gsm/hspa/lte(auto mode) is selected.
Click to expand...
Click to collapse
Thanks...those settings are the same on mine. Those are the only ones that stand out to me.
Thank you!

SkydiverChris said:
I ran through every post in that thread, but still no LTE. Man this is driving me crazy. I'll pay someone if they can help me get LTE back... I've already restored the QCN info using the QCN creator posted in one of the threads.
Click to expand...
Click to collapse
check peoplearmy's thread - he added info on how to also restore data. if you have having a problem, maybe don't use your own qcn, generate one with his method and restore that. Worked like a charm for me.

Gabik123 said:
check peoplearmy's thread - he added info on how to also restore data. if you have having a problem, maybe don't use your own qcn, generate one with his method and restore that. Worked like a charm for me.
Click to expand...
Click to collapse
I'm pretty sure I did that...but you have to use your own QCN to generate the new "injected" QCN. As far as I know, it doesn't generate one out of nothing. Unfortunately, I didn't have a QCN generated prior to breaking it. Now the "original" QCN I have is "broken" so when I inject it, it's injecting into a broken QCN.
Something I was curious about doing was getting another Rogers S3 QCN (from a willing XDA member), modifying the IMEI and injecting that back into my phone. Not sure if that would break things, but it might be worth a shot. I'm pretty desperate at this point.
Anyone willing to send me their Rogers QCN, so I can replace the IMEI, and inject it into my phone? Worst case the phone blows up, best case I get LTE back, or just restore my current "broken" QCN.
Thanks!

So...I am now fairly convinced that it actually is a hardware issue and not a software issue. I noticed that it was on LTE again (4th time in a week). I was outside walking my dog. I checked tosee if it was working, and out of shock it was! I then downloaded and ran speedtest...got 28down, 9.5 up. BAM!
Now, here's the kicker. I am in a zone where I've always had 4 bars of LTE, except now I can only get it outside. I checked the signal and it was at 62dbm. Walk inside my house, and it jumps to 87+ dbm and drops LTE. I've always had full LTE signal in my house, work, everywhere, now nothing. Based on this, I am certain that the antenna/radio is pooched. Now I have to either get it repaired or get a refurb...ugh. Giving up my month and a half old phone for a refurb really blows...

I am with Telus, and having the exact same problem (minus the IMEI thing).
I flashed to CM10, and my LTE stopped working. Went back to stock, and it's still not working.
Setting phone to LTE only gets me no signal.
I've tested it in Toronto, Mississauga, Barrie (all LTE capable) and nothing is working.

Apparently, it's an issue with the phone. Search Google for Galaxy S3 radio issues (or swap radio for signal) and there is tones of threads. I have a refurb phone coming from Rogers this week, and I'm gonna leave it at stock. Really sucks...but LTE is the bomb.
I read on one thread that Samsung is supposed to push a code fix for the modem, but that's from a bunch of people speculating on the issue. How true it is...time will tell. I'll post back if/when I get LTE back on the new phone.

So, I just got the new phone and LTE is back working everywhere it used to with full signal and full speed.

I hAve this now too...but it's just the icon as I am getting LTE speeds.
Might call Rogers too...

T-mobile to work on ATT

Hi,
I spent last night getting my t-mobile galaxy s4 to work on ATT. I did a lot of research on the subject and it wasn't that difficult at all. I bought the phone off of EBAY.
I was able to accomplish this from all of the tools here and a little research.
http://forum.xda-developers.com/showthread.php?t=2335109 (hopefully fixed link)
The first thing i did was root the phone and install CWM. I then used the sim unlock found in the link above. The next step i took (because i like custom roms on my phone) was to install TASK650's AOKP rom. I flashed the rom and followed his instructions.
After the restart, I went through the welcome screen and shut the phone down. I put my sim in and started the phone. I noticed i was getting the H, but no LTE. This led me to more research. The fix was easy once I found it. The APN needs to be pointed to the ATT phone option. It defaults to wap.cingular. After about 5 minutes and a reboot the LTE appeared and after the speed tests confirmed.
This is not a guide. I am just sharing my experience. If you do this please do your own research as you can do damage to your phone. There are risks involved, flash and modify your phone at your own risk.

Why are you posting the same thing here that you did in the att area?

actually i'm thankful that he posted it. I'm trying to accomplish the same thing and its good to know it works. I tried the unlock sim procedure and it didn't work, although I didn't follow the newer instructions, so I will try again.
also, your link seems to be broke

Guess if you post the same thing everywhere you may get an answer. New concept. I'm gonna remember that.

TheAxman said:
Guess if you post the same thing everywhere you may get an answer. New concept. I'm gonna remember that.
Click to expand...
Click to collapse
Best bet is to ignore the search function and post any and all questions you have, no matter the topic, wherever you please. Makes this forum so easy to navigate and n00b friendly.

Wrong
This is exactly why these forums go to sh$$
Obviously you did not read the rules, peeps like this need a week ban from this site until you understand the rules.
---------- Post added at 01:47 PM ---------- Previous post was at 01:40 PM ----------
lordcheeto03 said:
Best bet is to ignore the search function and post any and all questions you have, no matter the topic, wherever you please. Makes this forum so easy to navigate and n00b friendly.
Click to expand...
Click to collapse
close the thread

TheAxman said:
Wrong
This is exactly why these forums go to sh$$
Obviously you did not read the rules, peeps like this need a week ban from this site until you understand the rules.
---------- Post added at 01:47 PM ---------- Previous post was at 01:40 PM ----------
close the thread
Click to expand...
Click to collapse
Sarcasm doesn't go through text very well.. :\ I wasn't actually being serious. Check my posting history, I've been flamed for telling someone to do their own research... I've caught crap for recommending someone to, at the very least, use an already established thread on the subject to ask their question which has been asked a thousand times... but meh.

sob33316 said:
Hi,
I spent last night getting my t-mobile galaxy s4 to work on ATT. I did a lot of research on the subject and it wasn't that difficult at all. I bought the phone off of EBAY.
I was able to accomplish this from all of the tools here and a little research. http://forum.xda-developers.com/show....php?t=2335109
The first thing i did was root the phone and install CWM. I then used the sim unlock found in the link above. The next step i took (because i like custom roms on my phone) was to install TASK650's AOKP rom. I flashed the rom and followed his instructions.
After the restart, I went through the welcome screen and shut the phone down. I put my sim in and started the phone. I noticed i was getting the H, but no LTE. This led me to more research. The fix was easy once I found it. The APN needs to be pointed to the ATT phone option. It defaults to wap.cingular. After about 5 minutes and a reboot the LTE appeared and after the speed tests confirmed.
This is not a guide. I am just sharing my experience. If you do this please do your own research as you can do damage to your phone. There are risks involved, flash and modify your phone at your own risk.
Click to expand...
Click to collapse
could you post steps on how to point the apn to the att phone option? i just got a t-mobile s4 (m919) i unlocked it using a different method i am on the stock t-mobile rom it says 4G uptop but does that mean im getting the LTE
when i go to about it says
HSPA:11
help please i wanna get the most out of this phone as i paid full retail

TheAxman said:
Guess if you post the same thing everywhere you may get an answer. New concept. I'm gonna remember that.
Click to expand...
Click to collapse
So people who are looking can find out it works. Common sense would say they would look in one of the two forums.:good:

lacussumok said:
could you post steps on how to point the apn to the att phone option? i just got a t-mobile s4 (m919) i unlocked it using a different method i am on the stock t-mobile rom it says 4G uptop but does that mean im getting the LTE
when i go to about it says
HSPA:11
help please i wanna get the most out of this phone as i paid full retail
Click to expand...
Click to collapse
here they are on the custom rom. I am not on a stock rom, but it should be similar.
http://forum.xda-developers.com/showthread.php?t=2335109
system settings
wireless &network>more
mobile networks
access point names (APN)
make sure the ATT phone option it ticked.
you can also do a speed test and check if you are getting LTE speeds.
I hope this helps!

lacussumok said:
could you post steps on how to point the apn to the att phone option? i just got a t-mobile s4 (m919) i unlocked it using a different method i am on the stock t-mobile rom it says 4G uptop but does that mean im getting the LTE
when i go to about it says
HSPA:11
help please i wanna get the most out of this phone as i paid full retail
Click to expand...
Click to collapse
The AT&T APN's I have used in the past with success to get LTE are:
Name: ATT LTE
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MC: 310
MNC: 410
APN type: default,supl,mms
For the "phone" APN, just replace "pta" with "phone". The other values should be the same; although I never got LTE/4G with that APN.
Things not listed are "not set"

lordcheeto03 said:
The AT&T APN's I have used in the past with success to get LTE are:
Name: ATT LTE
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MC: 310
MNC: 410
APN type: default,supl,mms
For the "phone" APN, just replace "pta" with "phone". The other values should be the same; although I never got LTE/4G with that APN.
Things not listed are "not set"
Click to expand...
Click to collapse
hey guys those didnt work i did a google search for att lte apn settings found a couple and those didnt work either
does anybody have the correct apn settings for At&ts lte network i did a speed test and im getting 4000-8000kbps

lacussumok said:
hey guys those didnt work i did a google search for att lte apn settings found a couple and those didnt work either
does anybody have the correct apn settings for At&ts lte network i did a speed test and im getting 4000-8000kbps
Click to expand...
Click to collapse
Are you certain you're in an LTE area? I pulled those straight off the phone I was using prior to getting the S4; and I was getting LTE..
Ohh, one other thing, not sure if it applies, but still... depending on what kind of phone you are coming from, you may have to call AT&T and have them tweak your data plan. I've seen reports that when coming from an iPhone to Android, you will still be on the iPhone data plan and unable to receive 4G/LTE.

Yes I am in a lte area I used to get it with my iphone all the time then I switched to a s3 changed the plan and got it with that now I have an unlocked s4 through tmobile
A buddy of mine works for at&t so tomorrow hes gonna give me the stock apn settings from an s4 so ill try it out
Sent from my SGH-M919 using xda app-developers app

sob33316 said:
So people who are looking can find out it works. Common sense would say they would look in one of the two forums.:good:
Click to expand...
Click to collapse
I really appreciate you creating this thread. It helped me out a lot. just ignore the trolls as they are of no value.
Thanks to your thread and a little searching i too was able to get everything working. I moved to tmobile from att just to find out service in my area was very bad. Switched back to ATT and brought my tmobile galaxy s4 and everything works great. using paranoid android rom from tmobile forums and works perfect on ATT with LTE.

What do I need to do to my old Evo 4G wimax to remove the sprint to go GV?

Hi I have a Evo 4G wimax that I rooted and used on sprint till last week. I ported my # to different phone and like to use this old one as a Google voice phone and remove the sprint # and the info and it looking for sprint signal towers... Anyone do this yet? Hope I don't need to do a restore to lose all I still have on it for things....but if have to I have to

daves12555 said:
Hi I have a Evo 4G wimax that I rooted and used on sprint till last week. I ported my # to different phone and like to use this old one as a Google voice phone and remove the sprint # and the info and it looking for sprint signal towers... Anyone do this yet? Hope I don't need to do a restore to lose all I still have on it for things....but if have to I have to
Click to expand...
Click to collapse
ok first of all you need to tone down the supersize font on your posts. second it's not really clear what you're asking to do. as long as your phone's cellular radio is on its going to continue looking for signals based on your roaming settings and prl. if you're asking about the number that yuor google voice account is setup to use, well then those settings need to be configured in your google account. did you port your phone number over to another carrier or did you just change phones with the same service provider (sprint)? be more specific on what youre trying to do.

haxin said:
ok first of all you need to tone down the supersize font on your posts. second it's not really clear what you're asking to do. as long as your phone's cellular radio is on its going to continue looking for signals based on your roaming settings and prl. if you're asking about the number that yuor google voice account is setup to use, well then those settings need to be configured in your google account. did you port your phone number over to another carrier or did you just change phones with the same service provider (sprint)? be more specific on what youre trying to do.
Click to expand...
Click to collapse
Ok smaller font.... I ported my cell # to a different carrier at&t prepaid. Yes I guess I am looking to turn off my cellular radio. Someone said I can not just use goggle voice with Wi-Fi without any cell account or so with the evo. Is that true? I saw another guy post that was all he was using on an old smart phone. and I would have to use a VOIP sip or so.

daves12555 said:
Ok smaller font.... I ported my cell # to a different carrier at&t prepaid. Yes I guess I am looking to turn off my cellular radio. Someone said I can not just use goggle voice with Wi-Fi without any cell account or so with the evo. Is that true? I saw another guy post that was all he was using on an old smart phone. and I would have to use a VOIP sip or so.
Click to expand...
Click to collapse
I'd use something better than gvoice. Find a good app that can utilize more features of the phone...Skype and fb msgr keep this EVO goin.
Sent from my PC36100 using xda app-developers app

You can pay 20 dollars to move your number to Google voice and it will automatically shut off your account. Will post link in a minute
Sent from my LG-LS970 using Tapatalk 4
---------- Post added at 11:19 AM ---------- Previous post was at 11:16 AM ----------
Sorry didn't read the OP. You can disable the cell radio with juice defender I believe
Sent from my LG-LS970 using Tapatalk 4

Airplane mode then turn on WiFi.
Sent from my Evo 4g LTE using xda app-developers app

T989 out of USA issues: good signal but no network access

I have this T989 unlocked and beeing used with local SIM in Central America, maybe the modem/radio is not full compatible with the local network because in a Building I can get 3 or 4 signal bars but when I send a SMS I get "SMS not send" message, and get "No Network Service" when trying a voice call, why is there 3-4 signal bars without Network Available? Phone come back to normal when I go to an open field. Maybe the T989 Modem/Radio is not as full compatibleas I9100 (international model) modem/Radio? May I flash I9100 Modem/Radio into T989?

First, if you flash that radio you could brick. Do not flash anything not made for your device.
If you're on Jelly Bean, or a higher custom rom version, only the latest T-Mobile or Telus radios will work. Nothing else.
Is likely that your apn settings are wrong or missing. You'll have to Google what your carrier apn settings are and check in mobile network settings.
Also, if your carrier bands aren't supported by the t989, there's nothing you can do... It won't work.
View my profile, I dare you. ?
---------- Post added at 08:54 PM ---------- Previous post was at 08:53 PM ----------
And seeing "bars" is normal.... I have no Sim in mine and get bars.
View my profile, I dare you. ?

KJ said:
First, if you flash that radio you could brick. Do not flash anything not made for your device.
If you're on Jelly Bean, or a higher custom rom version, only the latest T-Mobile or Telus radios will work. Nothing else.
Is likely that your apn settings are wrong or missing. You'll have to Google what your carrier apn settings are and check in mobile network settings.
Also, if your carrier bands aren't supported by the t989, there's nothing you can do... It won't work.
View my profile, I dare you. ?
---------- Post added at 08:54 PM ---------- Previous post was at 08:53 PM ----------
And seeing "bars" is normal.... I have no Sim in mine and get bars.
View my profile, I dare you. ?
Click to expand...
Click to collapse
Yep, I have no sim and see those " signal bars" all the time. I believe T-Mobile told me it was for 911 signal or something.
Sent from my SGH-T989

OK, T989 will only work with modem for T989.
Thank you both!

apn settings on sm-976v

I jave a verizon note 10 plus. I want to switch to straight talk. The voice and text works but the mms and data do not. I tried to update the apn but unable to. Any insight to this?

Has Verizon unlocked it?
Sent from my SM-N975U1 using Tapatalk

Verizon unlocks its devices after 60 days.
Sent from my SM-N976V using Tapatalk
---------- Post added at 04:58 PM ---------- Previous post was at 04:54 PM ----------
tgrantjr said:
I jave a verizon note 10 plus. I want to switch to straight talk. The voice and text works but the mms and data do not. I tried to update the apn but unable to. Any insight to this?
Click to expand...
Click to collapse
How long have you had the device? If less than 60 days you're going to have to call Verizon.
If over 60 days.
Which Straight Talk SIM did you use? If I remember correctly, Straight Talk includes different SIMs for each network in its packaging.
You may need to call Straight Talk.
Sent from my SM-N976V using Tapatalk

They did not unlock it and I've had it over a year. They have a verizon sim that can make and receive calls and text. We can't send or receive mms and have no data connection. I try to get the proper apn and it says the user cannot make changes and everything is grayed out.

tgrantjr said:
They did not unlock it and I've had it over a year. They have a verizon sim that can make and receive calls and text. We can't send or receive mms and have no data connection. I try to get the proper apn and it says the user cannot make changes and everything is grayed out.
Click to expand...
Click to collapse
Then call Verizon. Verizon SIM unlocks its devices after 60 days. It's automatic.
Sent from my SM-N976V using Tapatalk

Probably need to flash unlocked firmware so you have full access to all the settings like apn and such
---------- Post added at 08:04 AM ---------- Previous post was at 07:43 AM ----------
From the way you've described. You cannot even put in apn settings?

Called Verizon and they said its unlocked and I cant change those settings even after the phone is unlocked so I'm screwed. There is no way for me to root and put custom firmware on it to edit that. I have a paperweight

tgrantjr said:
Called Verizon and they said its unlocked and I cant change those settings even after the phone is unlocked so I'm screwed. There is no way for me to root and put custom firmware on it to edit that. I have a paperweight
Click to expand...
Click to collapse
Then you need to call Straight Talk. The issue is with them, or you used the wrong SIM. Straight Talk includes multiple SIMs in its packaging because it supports all four (three?) of the US carriers.
You can also check to see if your phone will work:
https://www.straighttalk.com/wps/po...JYrUewB8OA5yPmrdwirLHecGR_lY5Q!!/#KNOWCARRIER
Sent from my SM-T727V using Tapatalk