Develop Bugs

[Q]( Problem is solved)my phone model number turned from sgh-i747 into sph-i710

hey guys! Ive flashed synergy rom into my sgh-i747 and ive got bunch of problems... one of them is that my phone model number turned from sgh-i747 into sph-i710 . I have no clue why that happened .please help !!((

oziverson said:
hey guys! Ive flashed synergy rom into my sgh-i747 and ive got bunch of problems... one of them is that my phone model number turned from sgh-i747 into sph-i710 . I have no clue why that happened .please help !!((
Click to expand...
Click to collapse
thats because you flashed the sprint version of the ROM onto your S3. download the AT&T version, full wipe and flash.

but if its possible, i could intall the version of i9300 and it will turn into international version wont it?

oziverson said:
but if its possible, i could intall the version of i9300 and it will turn into international version wont it?
Click to expand...
Click to collapse
NO! it will turn into a brick!!
only flash ROMs that are specifically for your device!
dude, you need to read up on all of this. check out the general forum. if your phone is an i747, then ONLY flash i747 ROMs.

dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .

http://forum.xda-developers.com/showthread.php?t=2179330
Step 5 in this thread has to do with flashing a ROM. download the CORRECT ROM and Gapps and follow those steps.
After you have completed that and have booted into the device fine (everything's correct and working), follow Step 4 on that thread to create a backup.
---------- Post added at 02:39 PM ---------- Previous post was at 02:38 PM ----------
oziverson said:
dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .
Click to expand...
Click to collapse
you asked about installing an international ROM. that's what i was replying to. what synergy release did you download?

okay it may seem i go stupid but İ had to flash sprint becuz it wasnt accepting att version. so i did install it and it seems to be workin okay. But i concern about i might be a problem after a while. And I still could not figure out how to make it back. i mean make it back to att version ? can anyone explain that ?

oziverson said:
okay it may seem i go stupid but İ had to flash sprint becuz it wasnt accepting att version. so i did install it and it seems to be workin okay. But i concern about i might be a problem after a while. And I still could not figure out how to make it back. i mean make it back to att version ? can anyone explain that ?
Click to expand...
Click to collapse
the reason i asked what release you were using was because certain versions of synergy dont work well with AT&T. the r290 and higher releases are supposedly working well.
if you used a release listed as r290 or higher then you might want to try a different ROM

http://forum.xda-developers.com/showthread.php?t=1792499 i have flashed the latest version that is r373 . it turned my phone into what it is not but suprisingly it works like a horse

oziverson said:
dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .
Click to expand...
Click to collapse
Don't mistake me as being "hard/rude"... but "know all about it" means you would've been careful in the first place, along with ways to come back in case of issue.
Like the previous poster said, you should flash only the ROM that's intended for the phone.
Also, a dev might release a ROM for all three carriers, but if you actually look into the OP of that ROM you'll realize that there is a version for each device.

Oh.i took it as my mistake.i shouldnt have said that. But i meant that i knew what he says but yeah ur right.i have no explanation for that. But i still cant see att version separetly ? Could you please link me

oziverson said:
Oh.i took it as my mistake.i shouldnt have said that. But i meant that i knew what he says but yeah ur right.i have no explanation for that. But i still cant see att version separetly ? Could you please link me
Click to expand...
Click to collapse
That's fine. Not an issue esp cos people here only try to help than finger point
Anyways, back to topic. If you do not see an AT&T version, I would suggest checking in the ROM thread itself. And if you still can't find it, it would mean there is no AT&T version. So you might be better off with one of the many AT&T specific ROMs here.

Okay thanks a lot for ur interest.im gonna give a few try more. And id like to say that even if my model nber is changed into sprint, my baseband number still shows that it is at&t . yeah its a bit confusing for me.anyways i will try to make it back and lets see if i can make it.

Problem is solved !!
I solved the problem through changing some parameters in built.prop like ''from d2spr to d2att and I used prop editor app ". http://forum.xda-developers.com/showthread.php?t=1828152 ....this link has the sample for att mobile phones. By this way, i succesfully changed the model number so that I could use att version stock rom to take everything back. I flashed att stock rom through Odin and its done !
Thanks for everbody's help !! sorry for english ,cuz im not native. If anyone has the problem and cant make it through, please let me know and im gonna try to make it clear.

oziverson said:
I solved the problem through changing some parameters in built.prop like ''from d2spr to d2att and I used prop editor app ". http://forum.xda-developers.com/showthread.php?t=1828152 ....this link has the sample for att mobile phones. By this way, i succesfully changed the model number so that I could use att version stock rom to take everything back. I flashed att stock rom through Odin and its done !
Thanks for everbody's help !! sorry for english ,cuz im not native. If anyone has the problem and cant make it through, please let me know and im gonna try to make it clear.
Click to expand...
Click to collapse
You may have the wrong recovery installed on your phone. The synergy thread has specific instructions concerning which version will be installed and it being dependant on your specific recovery. It clearly says that if you get to the installer in the aroma...and your phones model is shown and is wrong...that you should install the phones proper recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

4.4.2 KitKat-OmniROM - Mobile Network/ Baseband/IMEI/ Sim Card Problems

Hello all,
Recently flashed the latest OmniROM 4.4.2 KitKat on a Rogers i747 from a 4.3 CarbonROM, but as a result, I no longer have any mobile network connection whatsoever. Can't even make an emergency call. Wifi does work though.
I'm running:
omni-4.4.2-20140205-d2att-HOMEMADE
CWM 6.0.4.7
SuperSU 1.91
and flashed the latest bootloader boot_CWM_I747MVLUEMK5 as I was getting a status 7 error before I did this when flashing the ROM zip.
When I go into Mobile Network settings, it says insert SIM and restart if I try to access Mobile Plan (already tried)`, IMEI and basband is unknown. Basically everything in the phone status menu is unknown or disconnected. I am unable to add APN settings for some reason as I can enter it all but it will not save.
I haven't tried flashing a different radio yet and I cannot seem to find much through searches.
If more info is required for a diagnosis I'll try my best to provide it.
Any and all help is greatly appreciated
Cheers!

Problem solved. Didn't realize no modem was installed.
Mod: Please delete thread unless you find it useful for others.

HardGrit said:
Mod: Please delete thread unless you find it useful for others.
Click to expand...
Click to collapse
PLEASE KEEP FOR VISIBILITY
your post saved my phone. I recently flashed a CM11 nightly (cm-11-20140211-NIGHTLY-d2att.zip), was forced to update my bootloader using "boot_CWM_I747MVLUEMK5" in order to do so (would get failed prop bootloader error), and when i booted the phone i lost all signal as well.
Lost IMEI, unknown baseband. Tried to inject IMEI to no avail all day, until i saw this post, with such a simple fix.
THANK YOU

Network is disabled!
HardGrit said:
Problem solved. Didn't realize no modem was installed.
Mod: Please delete thread unless you find it useful for others.
Click to expand...
Click to collapse
How did you managed to make it work bec i'm having same problem can you please tell me solution ?

fysaldar said:
How did you managed to make it work bec i'm having same problem can you please tell me solution ?
Click to expand...
Click to collapse
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Question it still there how do u do that ?
---------- Post added at 11:44 AM ---------- Previous post was at 11:27 AM ----------
theramsey3 said:
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I need file for baseband update for GTN-7000 has some one got it ?

fysaldar said:
Question it still there how do u do that ?
---------- Post added at 11:44 AM ---------- Previous post was at 11:27 AM ----------
I need file for baseband update for GTN-7000 has some one got it ?
Click to expand...
Click to collapse
You need to find a flashable modem for your phone. Then flash it with twrp cwm or what ever the custom recovery for your phone is.
This forum is for the Samsung galaxy S3 SGH-I747 and SGH-I747M. You should go to the galaxy note forum. I am sure there is some stuff in the development section or read some stickies and the search function is your friend.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

HELP
HardGrit said:
Problem solved. Didn't realize no modem was installed.
Mod: Please delete thread unless you find it useful for others.
Click to expand...
Click to collapse
Sorry to be a pain.
How do i do this on a s3 i9305 running kitkat?
Thanks
---------- Post added at 12:46 PM ---------- Previous post was at 12:21 PM ----------
theramsey3 said:
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Hi could you tell me which modem i need to flash for a s3 i9305 in australia on telstra.
I have the same issues on kitkat with no reception, no imei number etc...
Thanks

thommo1977 said:
Sorry to be a pain.
How do i do this on a s3 i9305 running kitkat?
Thanks
---------- Post added at 12:46 PM ---------- Previous post was at 12:21 PM ----------
Hi could you tell me which modem i need to flash for a s3 i9305 in australia on telstra.
I have the same issues on kitkat with no reception, no imei number etc...
Thanks
Click to expand...
Click to collapse
I don't know anything about the i9305. I'm sure if you go to the right forum and ask there someone would be more than willing to guide you in the right direction. I recommend you read the stickies in the proper forum the information you seek may be there.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth

I dont have any problems yet but i had OTA 4.3 update and was able to root and use the knox remover successfully and any time i try to flash something im getting status 7 error, and after deleting getprop lines in the rom files i get status 4 error so i was wondering if i need to flash a new modem as well to be able to flash different roms? I have the sgh-i747 at&t obviously and i live in massachusetts (not sure if that matters lol in which modem you flash) but i thought i seen someone mention it, so just in case i am lol......any help is greatly appreciated guys, THANK YOU

I'm getting the same problem, flashing a modem didn't work. Does anyone know the number i have to dial to get into qualcomm usb settings? i can't get past that step to try injecting my imei again

briant1234 said:
I'm getting the same problem, flashing a modem didn't work. Does anyone know the number i have to dial to get into qualcomm usb settings? i can't get past that step to try injecting my imei again
Click to expand...
Click to collapse
I dont believe this rom will have a qualcomm usb settings menu.

Hi!
I've a similar problem, my i747m is unlocked with "123Unlock.nl" and i recently update my OS to 4.3 but i can't connect to the 3G/LTE network, i've already tried with TELCEL and IUSACELL chip and 3 differents ROMS but i can only use the 2G network, before i unlocked my phone i used the phone with TELCEL (LTE).
Anybody has any idea what could it be?
Thanks for your help.

Please help! No data, need kitkat modem.

Just updated to Kitkat on carbonrom. My phone doesn't connect to any networks so I need a modem, but the links in the stock images/kernels/ROM/modem thread over in development has broken links for me.
I would post over there asking for help but don't have enough posts and lost my old account.
Some one please re host a modem that will work for me.
Thank you so much.

Note327 said:
Just updated to Kitkat on carbonrom. My phone doesn't connect to any networks so I need a modem, but the links in the stock images/kernels/ROM/modem thread over in development has broken links for me.
I would post over there asking for help but don't have enough posts and lost my old account.
Some one please re host a modem that will work for me.
Thank you so much.
Click to expand...
Click to collapse
Actually, I was wondering if there is a newer modem than MK7 for 4.4+ KK Roms... running CyanogenMod 11 and LOOOOOOOVE IT!

Note327 said:
Just updated to Kitkat on carbonrom. My phone doesn't connect to any networks so I need a modem, but the links in the stock images/kernels/ROM/modem thread over in development has broken links for me.
I would post over there asking for help but don't have enough posts and lost my old account.
Some one please re host a modem that will work for me.
Thank you so much.
Click to expand...
Click to collapse
All you had to do was look at the last page of images/modem thread. I even put the link in my signature so more people would see it.
svavrek said:
Actually, I was wondering if there is a newer modem than MK7 for 4.4+ KK Roms... running CyanogenMod 11 and LOOOOOOOVE IT!
Click to expand...
Click to collapse
MK7 is the latest modem... until T-Mobile releases KK hopefully in the next few weeks.

lllll
kozmo21 said:
All you had to do was look at the last page of images/modem thread. I even put the link in my signature so more people would see it.
MK7 is the latest modem... until T-Mobile releases KK hopefully in the next few weeks.
Click to expand...
Click to collapse
Sorry about that. I checked the first page then went straight to Google.
I flashed the modem but no APNs or networks are showing up. My baseband also says unknown.
I believe I have to flash this /firmwares/3/?download=22863 (domain is sammobile)
Do I need to use Odin or can I just flash it in TWRP? Will I need to reinstall my ROM after that?
Sorry for my ignorance. Thanks.

Note327 said:
Sorry about that. I checked the first page then went straight to Google.
I flashed the modem but no APNs or networks are showing up. My baseband also says unknown.
I believe I have to flash this /firmwares/3/?download=22863 (domain is sammobile)
Do I need to use Odin or can I just flash it in TWRP? Will I need to reinstall my ROM after that?
Sorry for my ignorance. Thanks.
Click to expand...
Click to collapse
Did you download the correct version of carbon?
I'm using DN3 from AT&T forum and working fine and still on 4.1.2 bootloader (with agni kernel).
If you download that from sammobile, you will be on 4.3 bootloader... and there is no going back to 4.1.2. The only reason for 4.3 is wifi working without using wifi fix or different kernel. I'll be on 4.1.2 until I have to change.

This is OP. Got my account back.
I flashed the modem (is that all you're supposed to do? No wiping any thing) and had the same issues. My IMEI is also gone.
Restored back to a previous backup and now have my IMEI, baseband, and everything working.
I re downloaded the 7/04 carbon nightly with the most recent KK gapps and I'm having the same issues.
For now I'm on my old ROM unless some one can help.
Sent from my SGH-T889 using XDA Free mobile app

Modems are specific to device and you should never flash a modem meant for any other devices. MK7 is the most up to date modem for SGH-T889.
For now flashing MK7 modem should bring back your IMEI.

Note_2 said:
This is OP. Got my account back.
I flashed the modem (is that all you're supposed to do? No wiping any thing) and had the same issues. My IMEI is also gone.
Restored back to a previous backup and now have my IMEI, baseband, and everything working.
I re downloaded the 7/04 carbon nightly with the most recent KK gapps and I'm having the same issues.
For now I'm on my old ROM unless some one can help.
Sent from my SGH-T889 using XDA Free mobile app
Click to expand...
Click to collapse
Make certain you are on the most current recovery be it CWM or TWRP or variants thereof. Also make certain you are flashing the version appropriate for your model. N7105 (Note 2 Int'l) or I317 (AT&T) would be OK for a T889 if a T889 version is not available.

Updating TWRP fixed it. Thanks, I had no idea that could cause problems.
Sent from my SGH-T889 using XDA Free mobile app

You're welcome. It stinks being stuck with something like that.

This is a Tmo modem http://www.mediafire.com/?5hrw5zr7hh4mnmt
That I am using on a t889 running 4.4.2 touch whiz rom based on the international version
I have service as well as data.
Again this is running on a touch whiz rom use at your own risk .
---------- Post added at 07:11 PM ---------- Previous post was at 07:05 PM ----------
kozmo21 said:
Did you download the correct version of carbon?
I'm using DN3 from AT&T forum and working fine and still on 4.1.2 bootloader (with agni kernel).
If you download that from sammobile, you will be on 4.3 bootloader... and there is no going back to 4.1.2. The only reason for 4.3 is wifi working without using wifi fix or different kernel. I'll be on 4.1.2 until I have to change.
Click to expand...
Click to collapse
how do you check bootloader version ?? I flashed the 4.3 from sammobile did that upgrade the bootloader too ?

Some_dude36 said:
This is a Tmo modem http://www.mediafire.com/?5hrw5zr7hh4mnmt
That I am using on a t889 running 4.4.2 touch whiz rom based on the international version
I have service as well as data.
Again this is running on a touch whiz rom use at your own risk .
---------- Post added at 07:11 PM ---------- Previous post was at 07:05 PM ----------
how do you check bootloader version ?? I flashed the 4.3 from sammobile did that upgrade the bootloader too ?
Click to expand...
Click to collapse
Download phone info from playstore... https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
If you flashed the stock 4.3 from sammobile in Odin, then you will be on 4.3 bootloader.

kozmo21 said:
Download phone info from playstore... https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
If you flashed the stock 4.3 from sammobile in Odin, then you will be on 4.3 bootloader.
Click to expand...
Click to collapse
Ok so how do you ungrey apn protocols

Some_dude36 said:
Ok so how do you ungrey apn protocols
Click to expand...
Click to collapse
Sorry, don't have an answer to that?
edit: did read that it works on slimkat 4.4 ROM... so there is a possible fix.

CM12 for T0LTE

Has anyone tried this ?
https://www.tinhte.vn/threads/02-12..._e250l-k-s-n7105lte-i317-t889.2367038/page-40
I translated the section below
I did install it on My SGH-I317M, and it installed fine, except no BASEBAND / NETWORK
**************************************************************************************************************************************************************
Unofficial CM12 Test Build1 12/01/2014 For t0lte:
complete with older drivers drivers mali r3p2 (default rom cm) and kernel cm.
Rom:
https://mega.co.nz/#!8BV10bxK! 0AXYejubXP-TK9_bCG8z9nmyapF__iAznu2R7btefUg
Gapps 5.0:
https://s.basketbuild.com/gapps
Recovery: Philz_Touch_CMW 6.48.4
or TWRP 2.8.1.0 (recommended because it SELinux support + mount / unmount full and stable memory storages ...)
http://www.mediafire.com/download/mnccg7bcb22u8a7/openrecovery-twrp-2.8.1.0-t0ltetwrp.zip
2:37 SU (used to update as needed).
http://roms.abun880007.co.uk/supersu/
Instructions:
Clean 1.lam to install new rom:
factory reset wipe / clean data
format system
cache format davilk
2.flash rom + gapps then reboot.
Note before flash rom:
-There is to lock the screen in the form of code Pin
-Sim are used as universal sim, do not use sim or sim lock coupling => sim will be blocked permanently.
-Ril no baseband unknow because SELinux was disabled earlier => no wave wireless service and 4G / LTE. waiting for the next fix
-GPS can work or not depending on equipment =>'ll Fix in the next.
-Wifi normal operation (though not RIL), want to show keyboard operation, please go to settings Back in the language and keyboard flashed.
-see film not only known photo => wait for a fix in the next version.
machine image does not work so you download on google CHplay on the camera is ok => wait the following fix.
-This is only the alpha test, you should not expect anything more questions if it does not work as expected.

cant
Flash it , ill wait till baseband is fixed

This is exciting, anyone try it?

one80oneday said:
This is exciting, anyone try it?
Click to expand...
Click to collapse
I did try it on My SGH-I317M, and it installed fine, except there no BASEBAND and therefore NETWORK
wifi WORKED for me AND i TRIED OTHER APPS. i tried installing the modem and it made no difference.
These are where I found them :
http://www.openeducationusa.com/?p=31753
https://www.tinhte.vn/threads/02-12..._e250l-k-s-n7105lte-i317-t889.2367038/page-40 needs translated

Voyebanm said:
I did try it on My SGH-I317M, and it installed fine, except there no BASEBAND and therefore NETWORK
wifi WORKED for me AND i TRIED OTHER APPS. i tried installing the modem and it made no difference.
These are where I found them :
http://www.openeducationusa.com/?p=31753
https://www.tinhte.vn/threads/02-12..._e250l-k-s-n7105lte-i317-t889.2367038/page-40 needs translated
Click to expand...
Click to collapse
hey, @Voyebanm. that thread it mine on tinhte.vn (biorod_nguyen)
you can try this build here : http://forum.xda-developers.com/note-2-verizon/orig-development/rom-cyanogenmod-12-0-t2967940
baseband and service data network too work fine ( if you using other variant, then you need edit file updater-script)

mr.nth.na.vn said:
hey, @Voyebanm. that thread it mine on tinhte.vn (biorod_nguyen)
you can try this build here : http://forum.xda-developers.com/note-2-verizon/orig-development/rom-cyanogenmod-12-0-t2967940
baseband and service data network too work fine ( if you using other variant, then you need edit file updater-script)
Click to expand...
Click to collapse
Thank you.
Which part should I modify to make it recognize my Carrier baseband ? I installed it after I modified the first line in the updater-script to change the name and model. It installd fine and can search fo rthe networks but will not connect. I have the I317M model.

Voyebanm said:
Thank you.
Which part should I modify to make it recognize my Carrier baseband ? I installed it after I modified the first line in the updater-script to change the name and model. It installd fine and can search fo rthe networks but will not connect. I have the I317M model.
Click to expand...
Click to collapse
yep, all work fine. if you using i317 please visit thread make by me and try flash it :
http://forum.xda-developers.com/gal...05/rom-10-12-14-cm12-unofficial-data-t2969067

mr.nth.na.vn said:
yep, all work fine. if you using i317 please visit thread make by me and try flash it :
http://forum.xda-developers.com/gal...05/rom-10-12-14-cm12-unofficial-data-t2969067
Click to expand...
Click to collapse
Thank you.
I get Network now, I can send and receive text but no calls ( in or out ). I re-scan the Network multiple times and added the APN as well.
I am going to try re-flashing again when I get home. Not sure what is causing that. Any ideas, beside that, all is ok so far.
Update: Now I can call but I cannot receive any calls. the caller can hear the rings till my voice mail but i dont get the call.

Voyebanm said:
Thank you.
I get Network now, I can send and receive text but no calls ( in or out ). I re-scan the Network multiple times and added the APN as well.
I am going to try re-flashing again when I get home. Not sure what is causing that. Any ideas, beside that, all is ok so far.
Click to expand...
Click to collapse
For confirmation:
If you are on the international i705 (whatever) model, flash the ROM as is
If you are on the att (t0lte / i317) model, modify the ROM in 7zip with the attached files (exactly as (no changing file name)
Please confirm or correct any errors in the above logic
Sent from my SGH-I317 using Tapatalk

SwimDrewid said:
For confirmation:
If you are on the international i705 (whatever) model, flash the ROM as is
If you are on the att (t0lte / i317) model, modify the ROM in 7zip with the attached files (exactly as (no changing file name)
Please confirm or correct any errors in the above logic
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
i just replaced the updater script and followed the instructions. I have the sgh-i317m.

Check the n7105 area on xda. Its there

mr.nth.na.vn said:
yep, all work fine. if you using i317 please visit thread make by me and try flash it :
http://forum.xda-developers.com/gal...05/rom-10-12-14-cm12-unofficial-data-t2969067
Click to expand...
Click to collapse
hi
i follow your thread and still having the same issue. i can send an receive text messages. i can call out but i cannot receive call. the person calling me gets the ring and then to my voicemail which i receive. i replaced the script as indicated. i check the status of the cellular network state and it says Disconnected.. The model still shows as i605.

I grabbed this from the vzw thread earlier ...excellent work everyone....no issues ...new daily

On i317m, got it working...calls won't hang up though :-/
Other than that, very smooth and nice to use
Thanks!

what one did you install
trickyhurl said:
On i317m, got it working...calls won't hang up though :-/
Other than that, very smooth and nice to use
Thanks!
Click to expand...
Click to collapse
Im coming from SlimKat and i have 317m and i cant get it to install at all , iv tryed 15 times still fail. Please help

trickyhurl said:
On i317m, got it working...calls won't hang up though :-/
Other than that, very smooth and nice to use
Thanks!
Click to expand...
Click to collapse
Can you receive calls ? what baseband are you on ? I am on the I317MVLUDNF3
what have you done differently ?

Joshua Mr PC Repair said:
Im coming from SlimKat and i have 317m and i cant get it to install at all , iv tryed 15 times still fail. Please help
Click to expand...
Click to collapse
I am coming from Slimkat as well. Which recovery are you using ? I am using the Philz Touch 6.48.4 found here : https://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt/

Voyebanm said:
I am coming from Slimkat as well. Which recovery are you using ? I am using the Philz Touch 6.48.4 found here : https://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt/
Click to expand...
Click to collapse
Iv tryed that still gettin the error Cant update binary

I installed 7zipper, opened the zip, replaced the files as mentioned in op. Easy peasy
---------- Post added at 07:54 PM ---------- Previous post was at 07:53 PM ----------
Installed 7zipper from play store, opened zip and replaced files mentioned in op.
---------- Post added at 08:05 PM ---------- Previous post was at 07:54 PM ----------
I had to install cm in twrp and gapps in philz

trickyhurl said:
I installed 7zipper, opened the zip, replaced the files as mentioned in op. Easy peasy
---------- Post added at 07:54 PM ---------- Previous post was at 07:53 PM ----------
Installed 7zipper from play store, opened zip and replaced files mentioned in op.
---------- Post added at 08:05 PM ---------- Previous post was at 07:54 PM ----------
I had to install cm in twrp and gapps in philz
Click to expand...
Click to collapse
My Question was, Can you receive Calls? I can call , text (send and receive ), But not receiving any calls.

[Stock/Base] 4.4.4 NK2 Rooted-Deodexed-Knoxless-CIQless

Stock 4.4.4 NK2 Galaxy S4 M919/Jfltetmo
Yes this is T-mobile firmware and yes it has wifi calling.
Stock
Rooted
BusyBox
Knoxless
CIQless
Deodexed
Zip Aligned
ArchiInit'd support
ro.securestorage.support=false
commented out security.mdpp=None
Everything else completely untouched.
DOWNLOAD HERE
Stock NK2 kernel set to permissive
DOWNLOAD HERE
Modem file
DOWNLOAD HERE
Issues
Shouldn't be any.
​

You dirty little girl. Ha.. Happy new year bud and thanks!
Sent from my SGH-M919 using Tapatalk

Whoa, is this a new official release from Samsung/T-Mobile?

hella356 said:
Whoa, is this a new official release from Samsung/T-Mobile?
Click to expand...
Click to collapse
It's been out a few weeks. Like 2 or 3 but yeah

ShinySide said:
It's been out a few weeks. Like 2 or 3 but yeah
Click to expand...
Click to collapse
Guess I've been out of the loop. I'm running the previous 4.4.4; can this just be installed in recovery or does this bring in a new bootloader? Have you seen any differences with the new modem?
Thanks for helping keep the development rolling with the S4!

hella356 said:
Guess I've been out of the loop. I'm running the previous 4.4.4; can this just be installed in recovery or does this bring in a new bootloader? Have you seen any differences with the new modem?
Thanks for helping keep the development rolling with the S4!
Click to expand...
Click to collapse
If you want the new bootloader and all that flash the full firmware, I have it posted in my firmware thread in general.
Just flash via twrp/cwr/Philz
Dunno. I no longer have the device. Upgraded to the s5 and gave my 4 to my mom

I have a sprint s4. I unlocked it domestically using tutorials available in XDA and I'm using my phone on Tmobile now. Is it possible to flash this ROM to get WiFi calling?

avruma said:
I have a sprint s4. I unlocked it domestically using tutorials available in XDA and I'm using my phone on Tmobile now. Is it possible to flash this ROM to get WiFi calling?
Click to expand...
Click to collapse
Has wifi calling. Will it work for you not being a m919? Dunno 50/50 chance.

Been waiting for deodexed version. Thanks OP
---------- Post added at 09:35 PM ---------- Previous post was at 09:31 PM ----------
ShinySide said:
Has wifi calling. Will it work for you not being a m919? Dunno 50/50 chance.
Click to expand...
Click to collapse
Sir
may ask if you have S4 tw 4.4.4 stock systemui with flashlight?
Love you ROM but my eyes failed me. And I can't use SICKs because I detest 3minit framework.
Thanks in advance

Do we flash the modem file in Odin?
How about the kernel? in TWRP?
So what should be the order.
Flash modem in odin,
then full rom in TWRP then lastly the kernel?
thanks in advance.

tyrone1 said:
Do we flash the modem file in Odin?
How about the kernel? in TWRP?
So what should be the order.
Flash modem in odin,
then full rom in TWRP then lastly the kernel?
thanks in advance.
Click to expand...
Click to collapse
Modems always with odin.
Kernel, twrp
Modem, rom, kernel
Rom kernel modem
Rom modem kernel.
Doesn't really matter. Except rom before kernel.

ShinySide said:
Modems always with odin.
Kernel, twrp
Modem, rom, kernel
Rom kernel modem
Rom modem kernel.
Doesn't really matter. Except rom before kernel.
Click to expand...
Click to collapse
Thanks for your fast reply. I'm having a difficult time getting this to work.
I did the modem, before i even did anything else and verified that the baseband said nk2.
Then i tried installing the rom, and then immediately installing the kernal, then booting into system.
It all seems to work but i can't seem to get wifi to turn on. So i tried wiping all again, and booting into system and same thing.
Any suggestions? I'm trying to flash the system again without the kernel and will see if it works. Can you help explain what the kernel does?
thanks shinyside

tyrone1 said:
Thanks for your fast reply. I'm having a difficult time getting this to work.
I did the modem, before i even did anything else and verified that the baseband said nk2.
Then i tried installing the rom, and then immediately installing the kernal, then booting into system.
It all seems to work but i can't seem to get wifi to turn on. So i tried wiping all again, and booting into system and same thing.
Any suggestions? I'm trying to flash the system again without the kernel and will see if it works. Can you help explain what the kernel does?
thanks shinyside
Click to expand...
Click to collapse
Shouldn't have an issue, least none of the 60 download and runners, have said anything or reported any issues.
What bootloader and such are you on?
Just set to permissive, or should be haha, I don't have my s4 anymore to check. Should say permissive in Settings. Stock kernel is set to enforcing which is a "security" thing that blocks stuff like a lot of root apps or xposed/xposed modules from working properly. It's the stock kernel, just the ramdisk is edited to be permissive.

ShinySide said:
Shouldn't have an issue, least none of the 60 download and runners, have said anything or reported any issues.
What bootloader and such are you on?
Just set to permissive, or should be haha, I don't have my s4 anymore to check. Should say permissive in Settings. Stock kernel is set to enforcing which is a "security" thing that blocks stuff like a lot of root apps or xposed/xposed modules from working properly. It's the stock kernel, just the ramdisk is edited to be permissive.
Click to expand...
Click to collapse
Can't seem to get it to work. So i just restored a old backup i had of your stock NH7 rom and wifi works in there.... so i then proceded to try to flash the new rom over the NH7 version but after it all booted up, wifi not working again
For me at least seems that wifi not working in Nk2

Modem using Odin. There is instruction written for nh7. Exact procedure should be used. Reboot to make sure you have the new modem. Then flash rom immediately flash the permissive kennel. If you want you can also flash supersu 2.40 then reboot
---------- Post added at 07:38 PM ---------- Previous post was at 07:34 PM ----------
Flash a different kernel. WiFi will work. Check sickness mod v5. It has few kernels you can use

mrbackdoor said:
Modem using Odin. There is instruction written for nh7. Exact procedure should be used. Reboot to make sure you have the new modem. Then flash rom immediately flash the permissive kennel. If you want you can also flash supersu 2.40 then reboot
---------- Post added at 07:38 PM ---------- Previous post was at 07:34 PM ----------
Flash a different kernel. WiFi will work. Check sickness mod v5. It has few kernels you can use
Click to expand...
Click to collapse
Hey if you still want the flashlight send me the secsettings and systemui apks. I already deleted the zip off my pc

What are the major differences between NH7 / NK2?
Thanks for your continued support and efforts with the Galaxy S4 development.
My question is this, if I may . . .
What are the major differences between NH7 / NK2?
Was there some new service that Samsung rolled out?
In what way is NK2 better than NH7 ?
Thanks in advance for your reply . . . :good:

ShinySide said:
Hey if you still want the flashlight send me the secsettings and systemui apks. I already deleted the zip off my pc
Click to expand...
Click to collapse
Yes I do still want it very much. Can you use the apks from your HispAsian latest release? Love that rom.
Thanks
---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------
serendipityguy said:
Thanks for your continued support and efforts with the Galaxy S4 development.
My question is this, if I may . . .
What are the major differences between NH7 / NK2?
Was there some new service that Samsung rolled out?
In what way is NK2 better than NH7 ?
Thanks in advance for your reply . . . :good:
Click to expand...
Click to collapse
From what I know using both: modem (baseband) and additional support languages.
From what I have experienced, lte reception is a tat better.
I would just flash the modem unless you like stock.

mrbackdoor said:
Yes I do still want it very much. Can you use the apks from your HispAsian latest release? Love that rom.
Thanks
---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------
From what I know using both: modem (baseband) and additional support languages.
From what I have experienced, lte reception is a tat better.
I would just flash the modem unless you like stock.
Click to expand...
Click to collapse
Stock is always nice, but I was thinking that there was a new service that was an addition to what was previously released.
Thinking that there was a cross over to Lollipop with a touch-wiz enhancement.
Some new security level or even a Samsung service with data like you mentioned enhancement with LTE. . .
Even though it is Stock, I sure would like to know what was different about this release and why is Samsung pushing this release out.
Hopefully it wont be long before other developers pick this puppy up and tweak the heck of the property build and include the 4 way reboot and such . ...
Stock is always sweet :good:

mrbackdoor said:
Yes I do still want it very much. Can you use the apks from your HispAsian latest release? Love that rom.
Thanks
---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------
From what I know using both: modem (baseband) and additional support languages.
From what I have experienced, lte reception is a tat better.
I would just flash the modem unless you like stock.
Click to expand...
Click to collapse
You'd have use the settings, framework, system ui, mms, contacts, phone, and all to use the systemui and settings from HispAsian. I modded and themed the living hell out of that rom, and you'd have some major text issues and other ui issues, using its systemui and settings in this base among other issues probably. Have to use the ones from the base and just mod it in
serendipityguy said:
Thanks for your continued support and efforts with the Galaxy S4 development.
My question is this, if I may . . .
What are the major differences between NH7 / NK2?
Was there some new service that Samsung rolled out?
In what way is NK2 better than NH7 ?
Thanks in advance for your reply . . . :good:
Click to expand...
Click to collapse
Cant answer any of them. I can't run it as I don't own my s4 anymore. Some one asked if I'd do a nk2 so waalaa haha