Hello all,
Recently flashed the latest OmniROM 4.4.2 KitKat on a Rogers i747 from a 4.3 CarbonROM, but as a result, I no longer have any mobile network connection whatsoever. Can't even make an emergency call. Wifi does work though.
I'm running:
omni-4.4.2-20140205-d2att-HOMEMADE
CWM 6.0.4.7
SuperSU 1.91
and flashed the latest bootloader boot_CWM_I747MVLUEMK5 as I was getting a status 7 error before I did this when flashing the ROM zip.
When I go into Mobile Network settings, it says insert SIM and restart if I try to access Mobile Plan (already tried)`, IMEI and basband is unknown. Basically everything in the phone status menu is unknown or disconnected. I am unable to add APN settings for some reason as I can enter it all but it will not save.
I haven't tried flashing a different radio yet and I cannot seem to find much through searches.
If more info is required for a diagnosis I'll try my best to provide it.
Any and all help is greatly appreciated
Cheers!
Problem solved. Didn't realize no modem was installed.
Mod: Please delete thread unless you find it useful for others.
HardGrit said:
Mod: Please delete thread unless you find it useful for others.
Click to expand...
Click to collapse
PLEASE KEEP FOR VISIBILITY
your post saved my phone. I recently flashed a CM11 nightly (cm-11-20140211-NIGHTLY-d2att.zip), was forced to update my bootloader using "boot_CWM_I747MVLUEMK5" in order to do so (would get failed prop bootloader error), and when i booted the phone i lost all signal as well.
Lost IMEI, unknown baseband. Tried to inject IMEI to no avail all day, until i saw this post, with such a simple fix.
THANK YOU
Network is disabled!
HardGrit said:
Problem solved. Didn't realize no modem was installed.
Mod: Please delete thread unless you find it useful for others.
Click to expand...
Click to collapse
How did you managed to make it work bec i'm having same problem can you please tell me solution ?
fysaldar said:
How did you managed to make it work bec i'm having same problem can you please tell me solution ?
Click to expand...
Click to collapse
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Question it still there how do u do that ?
---------- Post added at 11:44 AM ---------- Previous post was at 11:27 AM ----------
theramsey3 said:
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I need file for baseband update for GTN-7000 has some one got it ?
fysaldar said:
Question it still there how do u do that ?
---------- Post added at 11:44 AM ---------- Previous post was at 11:27 AM ----------
I need file for baseband update for GTN-7000 has some one got it ?
Click to expand...
Click to collapse
You need to find a flashable modem for your phone. Then flash it with twrp cwm or what ever the custom recovery for your phone is.
This forum is for the Samsung galaxy S3 SGH-I747 and SGH-I747M. You should go to the galaxy note forum. I am sure there is some stuff in the development section or read some stickies and the search function is your friend.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
HELP
HardGrit said:
Problem solved. Didn't realize no modem was installed.
Mod: Please delete thread unless you find it useful for others.
Click to expand...
Click to collapse
Sorry to be a pain.
How do i do this on a s3 i9305 running kitkat?
Thanks
---------- Post added at 12:46 PM ---------- Previous post was at 12:21 PM ----------
theramsey3 said:
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Hi could you tell me which modem i need to flash for a s3 i9305 in australia on telstra.
I have the same issues on kitkat with no reception, no imei number etc...
Thanks
thommo1977 said:
Sorry to be a pain.
How do i do this on a s3 i9305 running kitkat?
Thanks
---------- Post added at 12:46 PM ---------- Previous post was at 12:21 PM ----------
Hi could you tell me which modem i need to flash for a s3 i9305 in australia on telstra.
I have the same issues on kitkat with no reception, no imei number etc...
Thanks
Click to expand...
Click to collapse
I don't know anything about the i9305. I'm sure if you go to the right forum and ask there someone would be more than willing to guide you in the right direction. I recommend you read the stickies in the proper forum the information you seek may be there.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth
I dont have any problems yet but i had OTA 4.3 update and was able to root and use the knox remover successfully and any time i try to flash something im getting status 7 error, and after deleting getprop lines in the rom files i get status 4 error so i was wondering if i need to flash a new modem as well to be able to flash different roms? I have the sgh-i747 at&t obviously and i live in massachusetts (not sure if that matters lol in which modem you flash) but i thought i seen someone mention it, so just in case i am lol......any help is greatly appreciated guys, THANK YOU
I'm getting the same problem, flashing a modem didn't work. Does anyone know the number i have to dial to get into qualcomm usb settings? i can't get past that step to try injecting my imei again
briant1234 said:
I'm getting the same problem, flashing a modem didn't work. Does anyone know the number i have to dial to get into qualcomm usb settings? i can't get past that step to try injecting my imei again
Click to expand...
Click to collapse
I dont believe this rom will have a qualcomm usb settings menu.
Hi!
I've a similar problem, my i747m is unlocked with "123Unlock.nl" and i recently update my OS to 4.3 but i can't connect to the 3G/LTE network, i've already tried with TELCEL and IUSACELL chip and 3 differents ROMS but i can only use the 2G network, before i unlocked my phone i used the phone with TELCEL (LTE).
Anybody has any idea what could it be?
Thanks for your help.
Related
can some one port a international rom pleses
or make muilt view work on the us version pleses
I have seen some international rom that adds the support for the T-mobile Note 2. But I have not tried it myself.
As to make the multiview screen work, I think we need a firmware update, just flash a rom on it will not work. So we are still waiting T-Mobile to make some action.
Correct me if I am wrong.
multiwindow
we just need one with full firmware update and all working for multiwindow
i hop some one can fix it
stanlywang said:
I have seen some international rom that adds the support for the T-mobile Note 2. But I have not tried it myself.
As to make the multiview screen work, I think we need a firmware update, just flash a rom on it will not work. So we are still waiting T-Mobile to make some action.
Correct me if I am wrong.
Click to expand...
Click to collapse
I used an international ROM but it didn't have signal.
Sent from my JellyBean Galaxys3
Dose it need the radio for the data ?
Sent from my SGH-T889 using xda premium
radio and RIL files
Well we have the radio from the development thread, we just need the RIL files next.
What is ril? Were they located?
Sent from my SGH-T889 using xda premium
I have the Tmobile T-889 and I flashed a chinese N705 rom and it works great. I haven't used the multiview feature. As crazy as it sounds I'm not sure how to select it but other people on this rom have used it.
:good:
http://forum.xda-developers.com/showthread.php?t=1958999&page=16
---------- Post added at 06:49 AM ---------- Previous post was at 06:40 AM ----------
cashyftw said:
Well we have the radio from the development thread, we just need the RIL files next.
Click to expand...
Click to collapse
I saw that you were in the same thread that I got the rom and modem from, how did you open multiple wondows?
pewterwest said:
I have the Tmobile T-889 and I flashed a chinese N705 rom and it works great. I haven't used the multiview feature. As crazy as it sounds I'm not sure how to select it but other people on this rom have used it.
:good:
http://forum.xda-developers.com/showthread.php?t=1958999&page=16
---------- Post added at 06:49 AM ---------- Previous post was at 06:40 AM ----------
I saw that you were in the same thread that I got the rom and modem from, how did you open multiple wondows?
Click to expand...
Click to collapse
This is a old thread (nov5) you should ask in the thread you download the rom from.. any way enough being a forum "daddy".. long press back button----> multi view/ window (same thing)
Sent from my SGH-T889 using xda app-developers app
This is on my list of to dos. I also wanna start a community rom where I teach all the users here to build and edit roms that way everyone can can add what they want into the community rom and pass the file on. I just need you guys to support the cause and we can make so much happen for this device.
http://forum.xda-developers.com/showthread.php?t=1988831
Sent from my SGH-T889 using xda premium
I recently purchased the boost mobile variant of the galaxy S3, i have got it rooted and custom recovery but none of the ROMS for sprint are working correctly, is there a development started yet? Ive tried several roms and things not working range from camera to 4G, to just overall sluggishness. If anybody knows a good rom thats working for the boost model, or knows how to get working 4G, i have tried flashing a backup of my stock modem.bin file over odin, but it fails at the end. any help is appreciated!
Derfus said:
I recently purchased the boost mobile variant of the galaxy S3, i have got it rooted and custom recovery but none of the ROMS for sprint are working correctly, is there a development started yet? Ive tried several roms and things not working range from camera to 4G, to just overall sluggishness. If anybody knows a good rom thats working for the boost model, or knows how to get working 4G, i have tried flashing a backup of my stock modem.bin file over odin, but it fails at the end. any help is appreciated!
Click to expand...
Click to collapse
I got the boost mobile GS3 and the best way to flash a sprint room is to first to odin flash the spritn stock md4 rom and then go from there...just like i did on my phone and everything work fine!!!!!
Jairsantana said:
I got the boost mobile GS3 and the best way to flash a sprint room is to first to odin flash the spritn stock md4 rom and then go from there...just like i did on my phone and everything work fine!!!!!
Click to expand...
Click to collapse
Ive tried this also, with the rooted 4.1.1 Odin OC file. Still no 4G. It connects to the LTE network, but the 4G data isnt working.
Derfus said:
Ive tried this also, with the rooted 4.1.1 Odin OC file. Still no 4G. It connects to the LTE network, but the 4G data isnt working.
Click to expand...
Click to collapse
yes I have the same problem but when I asked boost mobile about it they told me that they haven't upgrade the signal towers to get 4G LTE on all areas and this will be done by the end of the year so the only thing i don't know exacly the date they are planing on doing this(because I used to have the GS2 and that one does conect to 4G but it's not an 4G LTE like the GS3).
Jairsantana said:
yes I have the same problem but when I asked boost mobile about it they told me that they haven't upgrade the signal towers to get 4G LTE on all areas and this will be done by the end of the year so the only thing i don't know exacly the date they are planing on doing this(because I used to have the GS2 and that one does conect to 4G but it's not an 4G LTE like the GS3).
Click to expand...
Click to collapse
moar rom, dandroid 3.9.5 are working on boost variant with working 4g lte. i am in an lte coverage area thats why i bought the s3
Derfus said:
Ive tried this also, with the rooted 4.1.1 Odin OC file. Still no 4G. It connects to the LTE network, but the 4G data isnt working.
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=1639&nocache=1&z=206412875559180
Hey so I've tryed every rom from this post and 4G LTE works perfect but like I said before you have to be around a 4g LTE area for this to hapen!!!!personally i like jelly bomb rom.
Jairsantana said:
http://forum.xda-developers.com/forumdisplay.php?f=1639&nocache=1&z=206412875559180
Hey so I've tryed every rom from this post and 4G LTE works perfect but like I said before you have to be around a 4g LTE area for this to hapen!!!!personally i like jelly bomb rom.
Click to expand...
Click to collapse
Yea, i am using Dandroid rom now, it works well, i am in a good 4g coverage area. i only had a few roms that it didnt work on. i am happy with the rom i have now, i am looking for something better though
Ok folks, here's my request. I'm so close to getting a zip ROM for the Boost variant, but I need a few things. Could someone contact me either on here or in PM and provide a copy of the Boost boot animation files and the build prop from a Boost S3, not one from another carrier that's been flashed to Boost. I got a zip to boot today, but it bootlooped. Not because of these files, but if I'm going to do this, I'm going to do it right, and the backup I'm using to make the zip is Boost, but the build.prop says d2vmu, and I want to make sure I'm using the right one. Thanks in advance everyone. Let me know!
jdsingle76 said:
Ok folks, here's my request. I'm so close to getting a zip ROM for the Boost variant, but I need a few things. Could someone contact me either on here or in PM and provide a copy of the Boost boot animation files and the build prop from a Boost S3, not one from another carrier that's been flashed to Boost. I got a zip to boot today, but it bootlooped. Not because of these files, but if I'm going to do this, I'm going to do it right, and the backup I'm using to make the zip is Boost, but the build.prop says d2vmu, and I want to make sure I'm using the right one. Thanks in advance everyone. Let me know!
Click to expand...
Click to collapse
I will send mine later. I have a backup. I will also send APN file
Derfus said:
I will send mine later. I have a backup. I will also send APN file
Click to expand...
Click to collapse
That's perfect. Send the backup if you want. I will not load it, just gut what I need from it to put in mine
Sent from my SPH-L710 using xda premium
jdsingle76 said:
That's perfect. Send the backup if you want. I will not load it, just gut what I need from it to put in mine
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Whats a good site to upload to? the file is rar and about 1 gig. has apn and stock rooted twrp backup
Derfus said:
Whats a good site to upload to? the file is rar and about 1 gig. has apn and stock rooted twrp backup
Click to expand...
Click to collapse
Dev host is a good one, free and you don't have to be approved by anyone
Sent from my SPH-L710 using xda premium
Got the backup. Thanks! I'll keep everyone posted on the progress!
Sent from my SPH-L710 using XDA Premium 4 mobile app
jdsingle76 said:
Got the backup. Thanks! I'll keep everyone posted on the progress!
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
idk if that backup was a wiped backup or not, does it matter?
Derfus said:
idk if that backup was a wiped backup or not, does it matter?
Click to expand...
Click to collapse
No, I have a backup from a non activated Boost s3, but it's missing a few things for some reason. I'm just going to pull yours apart and use what I need, or night build the zip using your system.ext4 and boot.img if I find its all intact .
Sent from my SPH-L710 using XDA Premium 4 mobile app
jdsingle76 said:
Ok folks, here's my request. I'm so close to getting a zip ROM for the Boost variant, but I need a few things. Could someone contact me either on here or in PM and provide a copy of the Boost boot animation files and the build prop from a Boost S3, not one from another carrier that's been flashed to Boost. I got a zip to boot today, but it bootlooped. Not because of these files, but if I'm going to do this, I'm going to do it right, and the backup I'm using to make the zip is Boost, but the build.prop says d2vmu, and I want to make sure I'm using the right one. Thanks in advance everyone. Let me know!
Click to expand...
Click to collapse
Here's is my build.prop. Tried posting this yesterday but seems it got deleted somehow...
beneliezer said:
Here's is my build.prop. Tried posting this yesterday but seems it got deleted somehow...
Click to expand...
Click to collapse
Thanks beneliezer, but I got the official MD7 and have flashable zips ready to flash . Check Android Development for the latest boost builds. Thanks for the help though. :thumbup:
Sent from my SPH-L710 using xda premium
jdsingle76 said:
Thanks beneliezer, but I got the official MD7 and have flashable zips ready to flash . Check Android Development for the latest boost builds. Thanks for the help though. :thumbup:
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
you mind linking me? just checked and couldn't find it...
---------- Post added at 11:21 AM ---------- Previous post was at 11:10 AM ----------
beneliezer said:
you mind linking me? just checked and couldn't find it...
Click to expand...
Click to collapse
nevermind found it, thanks
beneliezer said:
you mind linking me? just checked and couldn't find it...
---------- Post added at 11:21 AM ---------- Previous post was at 11:10 AM ----------
nevermind found it, thanks
Click to expand...
Click to collapse
I think anyone that stumbles upon this thread may find some use out of these links
http://forum.xda-developers.com/showthread.php?t=2478909
http://forum.xda-developers.com/showthread.php?t=2478888
http://forum.xda-developers.com/showthread.php?t=2478867
Sent from my SPH-L710 using xda premium
beneliezer said:
you mind linking me? just checked and couldn't find it...
---------- Post added at 11:21 AM ---------- Previous post was at 11:10 AM ----------
nevermind found it, thanks
Click to expand...
Click to collapse
man, this new user crap is quite terrible... trying to hit 10 posts lol
---------- Post added at 12:22 PM ---------- Previous post was at 11:57 AM ----------
just flashed it to my phone, works well.
OK guys, There is no way I am the only one with a 900T itching to get my hands on KK and X-Note 9.0. I am very new to the whole rooting android devices but I am quickly learning the ropes. I have been reading many posts were where this is available to the 9005 versions. I also know that the 900T and 9005 are almost the same phone with 900T being locked (temporarily) to TMobile. I have been searching the threads for the past week looking for the answer if anyone with a 900T has been able to install the Official Poland Version 4.4.2 on their 900T. As some help I have been emailing someone else with a T-Mobile phone that helps to specialize in hard bricked devices. I am including the emails and I hope to get this thread moving forward. If it is not possible I would like to see if there is a way to work the system to get us the X-note 9.0 upgrade.
Originally Posted by FFTony
I am getting ready to add a room to my phone, I am a little worried about causing a hard brick. If I do are you able to fix the phone and at what cost? Also, what is your turn around time? Thanks.
Tomy1986.nt
It is still turn on what is phone model number ?
Originally Posted by FFTony
It is still running quite nicely, but I am concerned that the upgrade that I am going to attempt to perform will Brock my phone. I have read some threads on using the same card, but I don't know if it will work. I am just trying to cover my bases in a worst case scenario. My phone is sm-n900t. (T-mobile variant)
Side note: What I am going to attempt is to install the Poland version of kk to my phone. It is for the 9005 model (which the tmobile device is). Tmobile phones can run 9005 roms with a few updates, but I am not sure about the kk upgrade.
Tomy1986.nt
Have you already flashed stock 9005 Rom ? included bootloader of 9005 model ?
Originally Posted by FFTony
Not yet. I plan to tonight. So I should know tonight on how my phone on going to take the Poland upgrade.
Tomy1986.nt
Please do not flash another bootloader phone's model. it will hardbrick or IMEI number will be gone.
Until we get an official Kernel for 4.4.2 for Tmobile we wont be able to install it. I even tried it last night since I've used previous X-note editions in the past. Hopefully in a couple more weeks we'll have a kernel.
Darksynz said:
Until we get an official Kernel for 4.4.2 for Tmobile we wont be able to install it. I even tried it last night since I've used previous X-note editions in the past. Hopefully in a couple more weeks we'll have a kernel.
Click to expand...
Click to collapse
A few questions since I have spent a lot of time digging here in the threads.
1. Did you install the Official Poland 4.4.2 KK update?
2. Did you install the latest compulsion Kernel?
http://forum.xda-developers.com/showthread.php?t=2480353
I didn't. If I remember correctly Odin wouldn't let me install the bootloader
Sent from my SM-N9005 using Tapatalk
---------- Post added at 11:36 PM ---------- Previous post was at 11:30 PM ----------
Compulsion kernel doesn't yet support 4.4
Sent from my SM-N9005 using Tapatalk
Not to question your methods as I have not attempted yet. Did you have the correct boxes checked including the install bootloader? Also did you have your device is usb debug mode? Or is it impossible to flash another regions bootloader?
Sent from my SM-N900T using xda app-developers app
None of the 9005 roms will run on the N900T without a official KK kernel made for our device, I have done all the research, and it has the same issues that I went thru with Vision.
TheAxman said:
None of the 9005 roms will run on the N900T without a official KK kernel made for our device, I have done all the research, and it has the same issues that I went thru with Vision.
Axeman, Thank you very much for commenting on this post. I have seen your information alot dieingmy research. I have been attempting to gain traction on this topic. I do have a few questions.
1: is it possible to flash the official Poland KitKat version?
2: if it is possible, what are the risks that we are looking at?
I can see the problem with not having a custom kernel. Here is a link to one that I found earlier today.
http://forum.xda-developers.com/showthread.php?p=5027195
I also saw a thread today where the Canadian version is now able to upgrade to Kit Kat and flash x-note 9.0
Thank you again for your input.
Click to expand...
Click to collapse
You cant ODIN flash any official rom thats not intended for Tmobile. period.
Please someone correct me if Im wrong.
Can we flash xnote then flash the civ1.2 kernel would it work?
Sent from my SM-N9005 using xda app-developers app
Yes.. I'm running v 11 now
Sent from my SM-N9005 using Tapatalk
---------- Post added at 08:33 PM ---------- Previous post was at 08:32 PM ----------
You must flash the original 4.4.2 first though
Sent from my SM-N9005 using Tapatalk
Darksynz said:
Yes.. I'm running v 11 now
Sent from my SM-N9005 using Tapatalk
---------- Post added at 08:33 PM ---------- Previous post was at 08:32 PM ----------
You must flash the original 4.4.2 first though
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
There is a link in the q&a forum for xnote. This gives specific instructions for getting it to work on tmobile versions of the note 3. I tried on 4.3 and was successful and also on 4.4.2 successful as well. im aroma I just selected the uk version to flash. you probably already know this but I thought id post this for future reference for other members. this rom is real stable and has not gave me any issues whatsoever from version 11 to 13
I'm on V12 and I LOVE THIS ROM
mastermindx85 said:
Can we flash xnote then flash the civ1.2 kernel would it work?
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
The only thing I flashed through odin was the 4.4.2 bootloader for tmobile
Everything else was done through recovery
Tmobile version xnote 13
Civ version 2.1 kernel for tmobile note 3
And nfc wifi fix
I do recall reding along the threads somewhere that if you flash a non tmobile bootloader through odin you will end up with a fancy paper weight.
http://forum.xda-developers.com/showthread.php?p=50728165
This is where the info is in op in quoted box specific for t mobile
Sent from my SM-N9005 using xda app-developers app
kitkat
chuko303 said:
I'm on V12 and I LOVE THIS ROM
Click to expand...
Click to collapse
so its just like on the 4.3 bootloader. all we have to do is flash a tmobile kernel and the nfc wifi bluetoothfix?
thewierdone said:
so its just like on the 4.3 bootloader. all we have to do is flash a tmobile kernel and the nfc wifi bluetoothfix?
Click to expand...
Click to collapse
Yes. But I was successful flashing it on 4.3 without updating bootloader for version 12. Just flashed in the following order
Rom
Kernel
Fix
Sent from my SM-N9005 using xda app-developers app
Just updated to Kitkat on carbonrom. My phone doesn't connect to any networks so I need a modem, but the links in the stock images/kernels/ROM/modem thread over in development has broken links for me.
I would post over there asking for help but don't have enough posts and lost my old account.
Some one please re host a modem that will work for me.
Thank you so much.
Note327 said:
Just updated to Kitkat on carbonrom. My phone doesn't connect to any networks so I need a modem, but the links in the stock images/kernels/ROM/modem thread over in development has broken links for me.
I would post over there asking for help but don't have enough posts and lost my old account.
Some one please re host a modem that will work for me.
Thank you so much.
Click to expand...
Click to collapse
Actually, I was wondering if there is a newer modem than MK7 for 4.4+ KK Roms... running CyanogenMod 11 and LOOOOOOOVE IT!
Note327 said:
Just updated to Kitkat on carbonrom. My phone doesn't connect to any networks so I need a modem, but the links in the stock images/kernels/ROM/modem thread over in development has broken links for me.
I would post over there asking for help but don't have enough posts and lost my old account.
Some one please re host a modem that will work for me.
Thank you so much.
Click to expand...
Click to collapse
All you had to do was look at the last page of images/modem thread. I even put the link in my signature so more people would see it.
svavrek said:
Actually, I was wondering if there is a newer modem than MK7 for 4.4+ KK Roms... running CyanogenMod 11 and LOOOOOOOVE IT!
Click to expand...
Click to collapse
MK7 is the latest modem... until T-Mobile releases KK hopefully in the next few weeks.
lllll
kozmo21 said:
All you had to do was look at the last page of images/modem thread. I even put the link in my signature so more people would see it.
MK7 is the latest modem... until T-Mobile releases KK hopefully in the next few weeks.
Click to expand...
Click to collapse
Sorry about that. I checked the first page then went straight to Google.
I flashed the modem but no APNs or networks are showing up. My baseband also says unknown.
I believe I have to flash this /firmwares/3/?download=22863 (domain is sammobile)
Do I need to use Odin or can I just flash it in TWRP? Will I need to reinstall my ROM after that?
Sorry for my ignorance. Thanks.
Note327 said:
Sorry about that. I checked the first page then went straight to Google.
I flashed the modem but no APNs or networks are showing up. My baseband also says unknown.
I believe I have to flash this /firmwares/3/?download=22863 (domain is sammobile)
Do I need to use Odin or can I just flash it in TWRP? Will I need to reinstall my ROM after that?
Sorry for my ignorance. Thanks.
Click to expand...
Click to collapse
Did you download the correct version of carbon?
I'm using DN3 from AT&T forum and working fine and still on 4.1.2 bootloader (with agni kernel).
If you download that from sammobile, you will be on 4.3 bootloader... and there is no going back to 4.1.2. The only reason for 4.3 is wifi working without using wifi fix or different kernel. I'll be on 4.1.2 until I have to change.
This is OP. Got my account back.
I flashed the modem (is that all you're supposed to do? No wiping any thing) and had the same issues. My IMEI is also gone.
Restored back to a previous backup and now have my IMEI, baseband, and everything working.
I re downloaded the 7/04 carbon nightly with the most recent KK gapps and I'm having the same issues.
For now I'm on my old ROM unless some one can help.
Sent from my SGH-T889 using XDA Free mobile app
Modems are specific to device and you should never flash a modem meant for any other devices. MK7 is the most up to date modem for SGH-T889.
For now flashing MK7 modem should bring back your IMEI.
Note_2 said:
This is OP. Got my account back.
I flashed the modem (is that all you're supposed to do? No wiping any thing) and had the same issues. My IMEI is also gone.
Restored back to a previous backup and now have my IMEI, baseband, and everything working.
I re downloaded the 7/04 carbon nightly with the most recent KK gapps and I'm having the same issues.
For now I'm on my old ROM unless some one can help.
Sent from my SGH-T889 using XDA Free mobile app
Click to expand...
Click to collapse
Make certain you are on the most current recovery be it CWM or TWRP or variants thereof. Also make certain you are flashing the version appropriate for your model. N7105 (Note 2 Int'l) or I317 (AT&T) would be OK for a T889 if a T889 version is not available.
Updating TWRP fixed it. Thanks, I had no idea that could cause problems.
Sent from my SGH-T889 using XDA Free mobile app
You're welcome. It stinks being stuck with something like that.
This is a Tmo modem http://www.mediafire.com/?5hrw5zr7hh4mnmt
That I am using on a t889 running 4.4.2 touch whiz rom based on the international version
I have service as well as data.
Again this is running on a touch whiz rom use at your own risk .
---------- Post added at 07:11 PM ---------- Previous post was at 07:05 PM ----------
kozmo21 said:
Did you download the correct version of carbon?
I'm using DN3 from AT&T forum and working fine and still on 4.1.2 bootloader (with agni kernel).
If you download that from sammobile, you will be on 4.3 bootloader... and there is no going back to 4.1.2. The only reason for 4.3 is wifi working without using wifi fix or different kernel. I'll be on 4.1.2 until I have to change.
Click to expand...
Click to collapse
how do you check bootloader version ?? I flashed the 4.3 from sammobile did that upgrade the bootloader too ?
Some_dude36 said:
This is a Tmo modem http://www.mediafire.com/?5hrw5zr7hh4mnmt
That I am using on a t889 running 4.4.2 touch whiz rom based on the international version
I have service as well as data.
Again this is running on a touch whiz rom use at your own risk .
---------- Post added at 07:11 PM ---------- Previous post was at 07:05 PM ----------
how do you check bootloader version ?? I flashed the 4.3 from sammobile did that upgrade the bootloader too ?
Click to expand...
Click to collapse
Download phone info from playstore... https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
If you flashed the stock 4.3 from sammobile in Odin, then you will be on 4.3 bootloader.
kozmo21 said:
Download phone info from playstore... https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
If you flashed the stock 4.3 from sammobile in Odin, then you will be on 4.3 bootloader.
Click to expand...
Click to collapse
Ok so how do you ungrey apn protocols
Some_dude36 said:
Ok so how do you ungrey apn protocols
Click to expand...
Click to collapse
Sorry, don't have an answer to that?
edit: did read that it works on slimkat 4.4 ROM... so there is a possible fix.
I recently found out that I have the tri-band version of the Galaxy S3, and will need a .tar/.md5 file that's flashable through Odin to reset it to factory because I really messed it up when trying to install ROMS/Modems for the Non-triband version of the phone . The sound doesn't work, the cellular service does not work, and it will not update to 4.4.2. I do know that I recieved it with 4.4.2, so I'm guessing it still has the 4.4.2 bootloader (which I have not changed). I know it's a rare model, but if there's anyone with the right file, please post a working link to it. I have been unable to find any working links for it online by myself. Also, make sure it is for the SPH-L710T model.
Keylord0 said:
I recently found out that I have the tri-band version of the Galaxy S3, and will need a .tar/.md5 file that's flashable through Odin to reset it to factory because I really messed it up when trying to install ROMS/Modems for the Non-triband version of the phone . The sound doesn't work, the cellular service does not work, and it will not update to 4.4.2. I do know that I recieved it with 4.4.2, so I'm guessing it still has the 4.4.2 bootloader (which I have not changed). I know it's a rare model, but if there's anyone with the right file, please post a working link to it. I have been unable to find any working links for it online by myself. Also, make sure it is for the SPH-L710T model.
Click to expand...
Click to collapse
You may have found it already, but here.
http://forum.xda-developers.com/gal...nt-sphl710t-stock-flashable-tar-odin-t2967981
kdude63 said:
You may have found it already, but here.
http://forum.xda-developers.com/gal...nt-sphl710t-stock-flashable-tar-odin-t2967981
Click to expand...
Click to collapse
Hello, I messed the phone similar way, the link posted you is not working.
Please share it if you still have it.
Thanks!
---------- Post added at 02:37 PM ---------- Previous post was at 02:31 PM ----------
AndroidFan186 said:
Hello, I messed the phone similar way, the link posted you is not working.
Please share it if you still have it.
Thanks!
Click to expand...
Click to collapse
Any chance, if you have downloaded it and still on your PC
Can you please check and share it?