Develop Bugs

[Q]( Problem is solved)my phone model number turned from sgh-i747 into sph-i710

hey guys! Ive flashed synergy rom into my sgh-i747 and ive got bunch of problems... one of them is that my phone model number turned from sgh-i747 into sph-i710 . I have no clue why that happened .please help !!((

oziverson said:
hey guys! Ive flashed synergy rom into my sgh-i747 and ive got bunch of problems... one of them is that my phone model number turned from sgh-i747 into sph-i710 . I have no clue why that happened .please help !!((
Click to expand...
Click to collapse
thats because you flashed the sprint version of the ROM onto your S3. download the AT&T version, full wipe and flash.

but if its possible, i could intall the version of i9300 and it will turn into international version wont it?

oziverson said:
but if its possible, i could intall the version of i9300 and it will turn into international version wont it?
Click to expand...
Click to collapse
NO! it will turn into a brick!!
only flash ROMs that are specifically for your device!
dude, you need to read up on all of this. check out the general forum. if your phone is an i747, then ONLY flash i747 ROMs.

dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .

http://forum.xda-developers.com/showthread.php?t=2179330
Step 5 in this thread has to do with flashing a ROM. download the CORRECT ROM and Gapps and follow those steps.
After you have completed that and have booted into the device fine (everything's correct and working), follow Step 4 on that thread to create a backup.
---------- Post added at 02:39 PM ---------- Previous post was at 02:38 PM ----------
oziverson said:
dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .
Click to expand...
Click to collapse
you asked about installing an international ROM. that's what i was replying to. what synergy release did you download?

okay it may seem i go stupid but İ had to flash sprint becuz it wasnt accepting att version. so i did install it and it seems to be workin okay. But i concern about i might be a problem after a while. And I still could not figure out how to make it back. i mean make it back to att version ? can anyone explain that ?

oziverson said:
okay it may seem i go stupid but İ had to flash sprint becuz it wasnt accepting att version. so i did install it and it seems to be workin okay. But i concern about i might be a problem after a while. And I still could not figure out how to make it back. i mean make it back to att version ? can anyone explain that ?
Click to expand...
Click to collapse
the reason i asked what release you were using was because certain versions of synergy dont work well with AT&T. the r290 and higher releases are supposedly working well.
if you used a release listed as r290 or higher then you might want to try a different ROM

http://forum.xda-developers.com/showthread.php?t=1792499 i have flashed the latest version that is r373 . it turned my phone into what it is not but suprisingly it works like a horse

oziverson said:
dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .
Click to expand...
Click to collapse
Don't mistake me as being "hard/rude"... but "know all about it" means you would've been careful in the first place, along with ways to come back in case of issue.
Like the previous poster said, you should flash only the ROM that's intended for the phone.
Also, a dev might release a ROM for all three carriers, but if you actually look into the OP of that ROM you'll realize that there is a version for each device.

Oh.i took it as my mistake.i shouldnt have said that. But i meant that i knew what he says but yeah ur right.i have no explanation for that. But i still cant see att version separetly ? Could you please link me

oziverson said:
Oh.i took it as my mistake.i shouldnt have said that. But i meant that i knew what he says but yeah ur right.i have no explanation for that. But i still cant see att version separetly ? Could you please link me
Click to expand...
Click to collapse
That's fine. Not an issue esp cos people here only try to help than finger point
Anyways, back to topic. If you do not see an AT&T version, I would suggest checking in the ROM thread itself. And if you still can't find it, it would mean there is no AT&T version. So you might be better off with one of the many AT&T specific ROMs here.

Okay thanks a lot for ur interest.im gonna give a few try more. And id like to say that even if my model nber is changed into sprint, my baseband number still shows that it is at&t . yeah its a bit confusing for me.anyways i will try to make it back and lets see if i can make it.

Problem is solved !!
I solved the problem through changing some parameters in built.prop like ''from d2spr to d2att and I used prop editor app ". http://forum.xda-developers.com/showthread.php?t=1828152 ....this link has the sample for att mobile phones. By this way, i succesfully changed the model number so that I could use att version stock rom to take everything back. I flashed att stock rom through Odin and its done !
Thanks for everbody's help !! sorry for english ,cuz im not native. If anyone has the problem and cant make it through, please let me know and im gonna try to make it clear.

oziverson said:
I solved the problem through changing some parameters in built.prop like ''from d2spr to d2att and I used prop editor app ". http://forum.xda-developers.com/showthread.php?t=1828152 ....this link has the sample for att mobile phones. By this way, i succesfully changed the model number so that I could use att version stock rom to take everything back. I flashed att stock rom through Odin and its done !
Thanks for everbody's help !! sorry for english ,cuz im not native. If anyone has the problem and cant make it through, please let me know and im gonna try to make it clear.
Click to expand...
Click to collapse
You may have the wrong recovery installed on your phone. The synergy thread has specific instructions concerning which version will be installed and it being dependant on your specific recovery. It clearly says that if you get to the installer in the aroma...and your phones model is shown and is wrong...that you should install the phones proper recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

[Q] Stock firmware for US version of gt-p5210 (galaxy Tab 3 10.1)

Did anybody have a idea where can I find USA version stock firmware for galaxy tab 3 10.1. I odin german version firmware and now I want a return the tab3 to store. I need the return back to US version firmware.
Thanx

bespecter said:
Did anybody have a idea where can I find USA version stock firmware for galaxy tab 3 10.1. I odin german version firmware and now I want a return the tab3 to store. I need the return back to US version firmware.
Thanx
Click to expand...
Click to collapse
Here ya go - http://www.androidfilehost.com/?fid=23060877490002437

Zidkijah said:
Here ya go - http://www.androidfilehost.com/?fid=23060877490002437
Click to expand...
Click to collapse
Thank you

OMG thank you,
I have been searching for days. everything takes me to hotfile which the US has banned...
Thank you again! I was giving up hope

Thank you as well!
I pretty much screwed up my tab, lol. Formatted the wrong thing and pretty much just have CWM in a boot loop, haha.
---------- Post added at 05:50 PM ---------- Previous post was at 05:08 PM ----------
Worked like a champ.! Booted to a different language, just set it to english and so far so good!

wonder why sammobile doesn't have this up yet? (the us firmware I mean

gjimene2 said:
thank you as well!
I pretty much screwed up my tab, lol. Formatted the wrong thing and pretty much just have cwm in a boot loop, haha.
---------- post added at 05:50 pm ---------- previous post was at 05:08 pm ----------
worked like a champ.! Booted to a different language, just set it to english and so far so good!
Click to expand...
Click to collapse
wow i have the same problem a boot loop hope it works for meeeeee!

Zidkijah said:
Here ya go - http://www.androidfilehost.com/?fid=23060877490002437
Click to expand...
Click to collapse
That's for Galaxy Tab 3 7. That's not for the 10.1.
???

How to use this firmware with Odin?
I'm far from being well-versed in Android development, etc., but I have successfully flashed a couple of Samsung Galaxy devices using Odin and a firmware file. However, I can't seem to figure out a way to use the files I downloaded via this thread. I got both the "STOCK" and the "STOCK-deodexed-rooted" .ZIP files. When I extract the contents of the ZIP, I don't find any files of the kind that Odin is looking for (*.tar, *.md5, *.smd, etc.)
What am I missing? Can someone help me understand how to use these files I've downloaded with Odin to flash the firmware of this tablet? I recently flashed a Note 3 using Odin, but the firmware I found for it came in a file with a .tar.md5 extension, and Odin let me select it and knew just what to do with it.
Thanks!

4.4.2 KitKat-OmniROM - Mobile Network/ Baseband/IMEI/ Sim Card Problems

Hello all,
Recently flashed the latest OmniROM 4.4.2 KitKat on a Rogers i747 from a 4.3 CarbonROM, but as a result, I no longer have any mobile network connection whatsoever. Can't even make an emergency call. Wifi does work though.
I'm running:
omni-4.4.2-20140205-d2att-HOMEMADE
CWM 6.0.4.7
SuperSU 1.91
and flashed the latest bootloader boot_CWM_I747MVLUEMK5 as I was getting a status 7 error before I did this when flashing the ROM zip.
When I go into Mobile Network settings, it says insert SIM and restart if I try to access Mobile Plan (already tried)`, IMEI and basband is unknown. Basically everything in the phone status menu is unknown or disconnected. I am unable to add APN settings for some reason as I can enter it all but it will not save.
I haven't tried flashing a different radio yet and I cannot seem to find much through searches.
If more info is required for a diagnosis I'll try my best to provide it.
Any and all help is greatly appreciated
Cheers!

Problem solved. Didn't realize no modem was installed.
Mod: Please delete thread unless you find it useful for others.

HardGrit said:
Mod: Please delete thread unless you find it useful for others.
Click to expand...
Click to collapse
PLEASE KEEP FOR VISIBILITY
your post saved my phone. I recently flashed a CM11 nightly (cm-11-20140211-NIGHTLY-d2att.zip), was forced to update my bootloader using "boot_CWM_I747MVLUEMK5" in order to do so (would get failed prop bootloader error), and when i booted the phone i lost all signal as well.
Lost IMEI, unknown baseband. Tried to inject IMEI to no avail all day, until i saw this post, with such a simple fix.
THANK YOU

Network is disabled!
HardGrit said:
Problem solved. Didn't realize no modem was installed.
Mod: Please delete thread unless you find it useful for others.
Click to expand...
Click to collapse
How did you managed to make it work bec i'm having same problem can you please tell me solution ?

fysaldar said:
How did you managed to make it work bec i'm having same problem can you please tell me solution ?
Click to expand...
Click to collapse
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Question it still there how do u do that ?
---------- Post added at 11:44 AM ---------- Previous post was at 11:27 AM ----------
theramsey3 said:
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I need file for baseband update for GTN-7000 has some one got it ?

fysaldar said:
Question it still there how do u do that ?
---------- Post added at 11:44 AM ---------- Previous post was at 11:27 AM ----------
I need file for baseband update for GTN-7000 has some one got it ?
Click to expand...
Click to collapse
You need to find a flashable modem for your phone. Then flash it with twrp cwm or what ever the custom recovery for your phone is.
This forum is for the Samsung galaxy S3 SGH-I747 and SGH-I747M. You should go to the galaxy note forum. I am sure there is some stuff in the development section or read some stickies and the search function is your friend.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

HELP
HardGrit said:
Problem solved. Didn't realize no modem was installed.
Mod: Please delete thread unless you find it useful for others.
Click to expand...
Click to collapse
Sorry to be a pain.
How do i do this on a s3 i9305 running kitkat?
Thanks
---------- Post added at 12:46 PM ---------- Previous post was at 12:21 PM ----------
theramsey3 said:
They fixed their phones by flashing a modem(Sometimes referred to as a radio)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Hi could you tell me which modem i need to flash for a s3 i9305 in australia on telstra.
I have the same issues on kitkat with no reception, no imei number etc...
Thanks

thommo1977 said:
Sorry to be a pain.
How do i do this on a s3 i9305 running kitkat?
Thanks
---------- Post added at 12:46 PM ---------- Previous post was at 12:21 PM ----------
Hi could you tell me which modem i need to flash for a s3 i9305 in australia on telstra.
I have the same issues on kitkat with no reception, no imei number etc...
Thanks
Click to expand...
Click to collapse
I don't know anything about the i9305. I'm sure if you go to the right forum and ask there someone would be more than willing to guide you in the right direction. I recommend you read the stickies in the proper forum the information you seek may be there.
Sent from my SAMSUNG-SGH-I747 running S3Rx MJ2 bootloader MJB modem and it is smooth

I dont have any problems yet but i had OTA 4.3 update and was able to root and use the knox remover successfully and any time i try to flash something im getting status 7 error, and after deleting getprop lines in the rom files i get status 4 error so i was wondering if i need to flash a new modem as well to be able to flash different roms? I have the sgh-i747 at&t obviously and i live in massachusetts (not sure if that matters lol in which modem you flash) but i thought i seen someone mention it, so just in case i am lol......any help is greatly appreciated guys, THANK YOU

I'm getting the same problem, flashing a modem didn't work. Does anyone know the number i have to dial to get into qualcomm usb settings? i can't get past that step to try injecting my imei again

briant1234 said:
I'm getting the same problem, flashing a modem didn't work. Does anyone know the number i have to dial to get into qualcomm usb settings? i can't get past that step to try injecting my imei again
Click to expand...
Click to collapse
I dont believe this rom will have a qualcomm usb settings menu.

Hi!
I've a similar problem, my i747m is unlocked with "123Unlock.nl" and i recently update my OS to 4.3 but i can't connect to the 3G/LTE network, i've already tried with TELCEL and IUSACELL chip and 3 differents ROMS but i can only use the 2G network, before i unlocked my phone i used the phone with TELCEL (LTE).
Anybody has any idea what could it be?
Thanks for your help.

[Q] Unlocking Galaxy note 10 2104 edition USA T-mobile with stock rom

Unlocking Galaxy note 10 2104 edition USA T-mobile with stock rom
How do I Unlock Galaxy note 10 2104 edition USA T-mobile with stock rom 4.4.4

I had oneclickroot.com do mine. I installed a message program on my computer and plugged my Note into the USB. They did the rest. I had a few clicks on the Note from my end. Quick and painless. I think it was 30 bucks. They knew exactly what to do and it was in like 15 minutes they had it. Worth it to me! And, not the slightest problem. I the looked up what I needed to do to stop upgrades and renamed the necessary programs in the root to keep the stock rom as it is.

jonling said:
I had oneclickroot.com do mine. I installed a message program on my computer and plugged my Note into the USB. They did the rest. I had a few clicks on the Note from my end. Quick and painless. I think it was 30 bucks. They knew exactly what to do and it was in like 15 minutes they had it. Worth it to me! And, not the slightest problem. I the looked up what I needed to do to stop upgrades and renamed the necessary programs in the root to keep the stock rom as it is.
Click to expand...
Click to collapse
Thanks. Will try them

Did a little research on the forum, there is a rooting method for 4.4.4 p607, check the firm were and build number, I successfully rooted mine with the p607 I recently purchased
androidxda.com/root-samsung-galaxy-note-10-1-sm-p607t
---------- Post added at 04:30 PM ---------- Previous post was at 04:20 PM ----------
wuvio said:
Did a little research on the forum, there is a rooting method for 4.4.4 p607, check the firm were and build number, I successfully rooted mine with the p607 I recently purchased
androidxda.com/root-samsung-galaxy-note-10-1-sm-p607t
Click to expand...
Click to collapse
However , I am bother by which version of twrp is safe to install as recover right now, have found nothing anywhere!
Help!

wuvio said:
Did a little research on the forum, there is a rooting method for 4.4.4 p607, check the firm were and build number, I successfully rooted mine with the p607 I recently purchased
androidxda.com/root-samsung-galaxy-note-10-1-sm-p607t
---------- Post added at 04:30 PM ---------- Previous post was at 04:20 PM ----------
However , I am bother by which version of twrp is safe to install as recover right now, have found nothing anywhere!
Help!
Click to expand...
Click to collapse
Are you saying that the Note is unlocked after the rooting process?

Cyanogenmod installer
Sent from my SM-N910V using XDA Free mobile app

Pretty sure you're not unlocking anything, just rooting...and you paid $30 for it, what a waste.

I don't know anything about unlock neither, I use that mostly on WiFi , not with LTE

dimex said:
Pretty sure you're not unlocking anything, just rooting...and you paid $30 for it, what a waste.
Click to expand...
Click to collapse
I have not paid any money, just clarifying

OrimsXDA said:
I have not paid any money, just clarifying
Click to expand...
Click to collapse
I found an ulocker on ebay.com. They did it for $13.90 here http://www.ebay.co.uk/itm/191617827609 .
I thought I will post this to help anyone looking to unlock their tablet.

wanting to port autodroid to the t310...possible?

Hi guys, I'm looking to port autodroid to the t310 wifi model, anyone have any idea where i'd even start with this?.....am I even allowed to port it or do I need permission from the maker of autodroid? any help would be appreciated. Thanks
Dan

dantheman1977 said:
Hi guys, I'm looking to port autodroid to the t310 wifi model, anyone have any idea where i'd even start with this?.....am I even allowed to port it or do I need permission from the maker of autodroid? any help would be appreciated. Thanks
Dan
Click to expand...
Click to collapse
You will need 3 things. It's a bit late and I'm sorry but I'm too tired to actually link them. They should be easy to find Google you can also find links on this forum. You can also watch a video on how to administer them on YouTube.
You will need to download one application and 2 files.
First you'll need an application called Odin 3.8. I believe that's the latest one.
You will need two files: 1. Philztouch recovery in an md5 file. It is no longer being updated finding it may require a little work. I personally I like it but others prefer the alternative called TWRP, also in md5 file. You will use Odin to flash one of these two files. You only need one.
Next you will need an md5 file from Chainfire. This file will unlock the device. Once it is completely rooted you will be free to load on Android 5.1. 1 and a copy of gapps.
Here is the link to Android 5.1.1
http://forum.xda-developers.com/gal.../sm-t31x-cyanogenmod-12-1-unofficial-t3094681
Good luck. - PC
PS I'm assuming this is your first modding a Samsung device. far as I know Odin is only used for Samsung devices. YouTube has plenty of videos on how to use it. Once you get the hang of it you can mod multiple Samsung devices with it.
---------- Post added at 05:55 AM ---------- Previous post was at 05:51 AM ----------
Gah!! I just wrote all that out for no reason. Lol I just realized you were asking for a totally different ROM. What I link is actually cm. It is late and I need to go to bed.
Disregard the last post. I am tired.