Q&A for [ROM] SlickRom G3 [V20P][No Sprint/Verizon]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] SlickRom G3 [V20P][No Sprint/Verizon]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Will it work with the d852
Cheers mate !! I just wanna know if slickrom work with the d852 thx
d852
any inputs on the d852? Is it fully functionnal?
thanks
LG Security Error
Tried to flash both D855 versions, and both refused to boot. After Aroma finished, the LG went directly to a "LG Security Error" screen and wouldn't proceed any further. Just powering off so I could boot into recovery and restore my TWRP backup was a fraught experience. Any suggestions for getting further into the installation would be gratefully appreciated. (Installation instructions were scrupulously followed both times.)
LG G3 D855
3GB/32GB
security error
I get security error d852
Will 2.0 allow us to use custom kernels?
Sharpening gone?
xxsashixx said:
Will 2.0 allow us to use custom kernels?
Sharpening gone?
Click to expand...
Click to collapse
It should (I've always used the correct files, idk what happened with 1.1), and yes.
cant find NT CODE MCC
CURRENT VERSION IS NOT AVAILABLE FOR USER CANT FIND MATCHED CUST FOR NT CODE
after booting in get this error message:
current version is not available for user.
Cant find matched cust for NT-code Mcc/mnc subset
The first time I installed this rom (1.1v) I've got an security error
To fix it I flashed Navel_Kernel and everything work !
The rom is pretty smooth and fast , battery is better then cloudyg3 and stock 5.0
Now I want to update to 2.0, I need to do wipe or dirty flash it ?
Sorry for bad English :s
AzzakJaocd said:
The first time I installed this rom (1.1v) I've got an security error
To fix it I flashed Navel_Kernel and everything work !
The rom is pretty smooth and fast , battery is better then cloudyg3 and stock 5.0
Now I want to update to 2.0, I need to do wipe or dirty flash it ?
Sorry for bad English :s
Click to expand...
Click to collapse
I tried dirty flash of 2.0 last night. Gave lots of ui and phone fc's. Restored back. Will clean flash later today.
javedah said:
CURRENT VERSION IS NOT AVAILABLE FOR USER CANT FIND MATCHED CUST FOR NT CODE
after booting in get this error message:
current version is not available for user.
Cant find matched cust for NT-code Mcc/mnc subset
Click to expand...
Click to collapse
It means nothing, most ROMs have this issue (aside for Cloudy). Just ignore it. Also listed in the OP's bug list, and I'm trying to fix it.
AzzakJaocd said:
The first time I installed this rom (1.1v) I've got an security error
To fix it I flashed Navel_Kernel and everything work !
The rom is pretty smooth and fast , battery is better then cloudyg3 and stock 5.0
Now I want to update to 2.0, I need to do wipe or dirty flash it ?
Sorry for bad English :s
Click to expand...
Click to collapse
Do not dirty flash, backup and flash.
Subsonic44 said:
I tried dirty flash of 2.0 last night. Gave lots of ui and phone fc's. Restored back. Will clean flash later today.
Click to expand...
Click to collapse
Too many changes to dirty flash.
nygfan760 said:
Too many changes to dirty flash.
Click to expand...
Click to collapse
That was my thought. This is the best rom I've had on my G3 since I got it! Certainly worth a clean flash for the update. What version of Navel does 2.0 include?
Subsonic44 said:
That was my thought. This is the best rom I've had on my G3 since I got it! Certainly worth a clean flash for the update. What version of Navel does 2.0 include?
Click to expand...
Click to collapse
The newest as of yesterday.
nygfan760 said:
The newest as of yesterday.
Click to expand...
Click to collapse
Thanks #nygfan760! Version 2 installed and better than ever. Have one on me!
Confirmation number: 73P191972J375801X
Subsonic44 said:
Thanks #nygfan760! Version 2 installed and better than ever. Have one on me!
Confirmation number: 73P191972J375801X
Click to expand...
Click to collapse
Holy crap man, thank you so much. Just happy people are loving the rom.
How can I get the korean fonts to show up?
Edit: nvm font issue
Hi guys does anyone have any problem with titanium backup for this rom? I clicked on batch actions but it says that my backup location (which is the ext sd card) cannot be accessed although I could open my files from my ext sd card using es file explorer. Any help would be much appreciated!
Hey I can't see any other fonts except English too. Mind helping me?
Sent from my LG-D855 using XDA Free mobile app
I can't get this ROM to boot past the boot splash screen. This happens every time I clean flash.
HEllo, thank you for this fast rom.
I just want to know how to install quick circle.
I've tried to put the apk in /system/app or /system/priv-app, change folder and file permission but after reboot for both I had system UI and LGCover crash .
I've tried to wipe cache and dalvik cache, fix permission but no change
Related
For Starters....
I'd just like to stay that this is none of my own work, I've just piggy backed off everyone else's work because I wanted the latest stock rooted with recovery. And i am by no means a developer. But I've seen this been requested a few places so I thought I would share.
This installed perfectly on my sim free 16gb D802 here in the UK, so I cannot see any reason why it wont install on any 16gb D802.
First off, Recovery.
I used Philz touch(6.19.7), I haven't had a single problem with the latest version of this recovery for either stock or aosp roms. And if you wish to use this rom please use his latest recovery for a smooth install as i can not help you otherwise. This rom has NOT been tested on twrp so please do not use it for this rom.
Installation
There has been one report of someone loosing their recovery, if you test this zip, use an app from the play store to boot into recovery to avoid doing a full wipe if recovery isn't their.
If you haven't installed a stock kk rom before with custom recovery, you'll need to download the kitkat baseband from Cloudyfa, if your not sure do it anyway, it wont hurt - http://forum.xda-developers.com/showthread.php?t=2680948
If you wish to be rooted the easiest way is to make root when prompted as you exit recovery and then install SuperSu from the play store. Alternatively you can download the latest SuperSu and flash it in recovery.
Second download THE ROM - https://mega.co.nz/#!lt9AhYzD!kOjq9_C8Ag-vP1D8UKnbAl3dwx8zmK__BETgGuQdSnE
Mirror - Thanks Wimmme - https://docs.google.com/file/d/0B_CmKeXB6dmrU0ZUbXBKY2Vmanc/edit
Back up personal data
Nandroid Backup
Do A Full Wipe!!
Flash KitKat Baseband if needed.
Flash Rom
Flash SuperSu *Optional, can be flashed or installed after.
Reboot!
If you feel it is a bit sluggish comparing with the custom stock roms, you can always reduce the animation speed in developer settings.
Problems with 4G/LTE?
Get a file explorer with root. Go to root of phone -> system -> build.prop and change ro.telephony.default_network from 9 to 11 and save. Annoyingly will be lost after reboot. If it still doesn't work after this change, try also along with this edit:
jsen said:
Try this, find and edit in build.prop
ro.build.target_country=SG (obviously mine is SG, so pls change to YOUR country)
:good::good:
Click to expand...
Click to collapse
Big Thanks and credits to:
LenAsh - For his Flashable zip of 80220C of with this is based on.
Cloudyfa - For his work with the boot mod and KK Baseband. And the clear about his custom boot.
Savoca - For work with boot mod.
Chainfire - For SuperSu
If there is any problems with me doing this please notify me and ill remove it immediately, Thanks.
hiii
v20c when relesed ???i not found link
jojobans said:
hiii
v20c when relesed ???i not found link
Click to expand...
Click to collapse
I believe LenAsh said the build date was the 25th of march.
Merfy said:
I believe LenAsh said the build date was the 25th of march.
Click to expand...
Click to collapse
but i not found link 20c ..Where is link download
jojobans said:
but i not found link 20c ..Where is link download
Click to expand...
Click to collapse
Sorry, are you talking about my OP? or to the official Kdz. If your talking about my Op . it's the second of the two links.
Will this work on 32gb version ?
albsat said:
Will this work on 32gb version ?
Click to expand...
Click to collapse
I can't say for sure as i can not test but, i can tell you that people with 32gb phones have had success with the same flashable zip without the mods for custom recovery if you check their threads. So my guess is yes, it would work, but there is no guarantee, if you try just make sure you have a 32gb rom you've used before and know if working on the phone to flash back to or of course do a nandroid backup.
If anyone has tried this, please post and let me know its running. So I can leave the thread up with confidence. Thanks.
jojobans said:
but i not found link 20c ..Where is link download
Click to expand...
Click to collapse
Why not at least look? Or search? My thread is here:
http://forum.xda-developers.com/showthread.php?t=2707170
And - why are you asking for a kdz in this thread? Off topic, largely
---------- Post added at 12:12 PM ---------- Previous post was at 12:11 PM ----------
albsat said:
Will this work on 32gb version ?
Click to expand...
Click to collapse
Yes
Keep custom recovery after flash?
After flashing the baseband + rom do I keep my custom recovery??
WNTR said:
After flashing the baseband + rom do I keep my custom recovery??
Click to expand...
Click to collapse
Yes
It is working on my Singaporean 32GB D802. I didn't have to do a full wipe and it's ok.
Just flashed it all and it works great.
Verstuurd vanaf mijn LG-D802 met Tapatalk
WNTR said:
Just flashed it all and it works great.
Verstuurd vanaf mijn LG-D802 met Tapatalk
Click to expand...
Click to collapse
Do you still have custom recovery? I flashed this wanted to reboot into recovery and the phone performed a hard reset....
:crying:
Stil got philz recovery.
Verstuurd vanaf mijn LG-D802 met Tapatalk
Kickoff said:
Do you still have custom recovery? I flashed this wanted to reboot into recovery and the phone performed a hard reset....
:crying:
Click to expand...
Click to collapse
I'm really sorry about that! But to my understanding it shouldn't even be possible since only the system, modem and cust partitions are in the zip so your recovery shouldn't be touched.
Are you sure you didn't flash anything else before hand? what's steps did you take? followed my instructions?
To anyone who wants to test if they have recovery, then I recommend using an app from the play store in order to reach your recovery, that way i think you'll avoid wiping your phone if you truly have no recovery anymore after flashing the zip.
Update
So your post has really made me panic as obviously I only have good intentions and feel terrible about your loss of personal data. But I've double even triple checked everything, not much can go wrong, I just tested the zip with TWRP. And I'm still getting a good install with recovery. You do have the D802 yes? as clearly the zip only contains the patched D802 boot only.
I've literally only just started developing for a few months now after a recent uni project inspired me. Building myself a custom rom adding the features I miss but such problems like this scare me of ever sharing them. Too much responsibility.
Again really sorry, would love to know what has gone wrong. I'll leave the link up for now unless a similar problem occurs in which it will be removed.
Maybe he accidentaly flashed lenash's zipfile instead of yours. Then he would lose custom recovery.
Verstuurd vanaf mijn LG-D802 met Tapatalk
if nobody else has had that problem and they followed your instructions unless there are loads with the same problem then its got to be user error,please dont be put off as im sure your confidence will grow with time thanks for bringing this to release and please carry on doing what you do as we need good people like yourselves to keep on doing this stuff, cheers and thanks for sharing
martindar said:
if nobody else has had that problem and they followed your instructions unless there are loads with the same problem then its got to be user error,please dont be put off as im sure your confidence will grow with time thanks for bringing this to release and please carry on doing what you do as we need good people like yourselves to keep on doing this stuff, cheers and thanks for sharing
Click to expand...
Click to collapse
Yeah, I guess your right, I thought I was pretty safe sharing this as like I said it isn't my own work just patched together what the experienced developers have released. But I have work in progress I think people will enjoy. Just didn't realise how responsible i would feel untill i read that message and had a full blown panic haha.
has someone seen any change/improvement vs 20b?
Since kitkat my g2 stutter when playing youtube HD video over wifi when bluetooth is enabled. as soon as I turn it off, it plays smoothly.
I would really like to know if this release fix it before upgrading.
Q&A for [Kernel][23/10/14][D855/P/K|F400/K/S/L]Rin Kernel 1.6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Kernel][23/10/14][D855/P/K|F400/K/S/L]Rin Kernel 1.6. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hey guys, i need your help. i try to install the kernel but to back off i can´t do the install to mode download, because is has broken my laf.img
i has d855 latin american version 10L. and to try unzip kdz. with LG Firmware extract,
i can obtain the file laf_393216.bin, but i don´t know convert to .img
I hope any help your.
sorry my english is bad, but i try to improve.
regards and thank you all
mlopezh said:
hey guys, i need your help. i try to install the kernel but to back off i can´t do the install to mode download, because is has broken my laf.img
i has d855 latin american version 10L. and to try unzip kdz. with LG Firmware extract,
i can obtain the file laf_393216.bin, but i don´t know convert to .img
I hope any help your.
sorry my english is bad, but i try to improve.
regards and thank you all
Click to expand...
Click to collapse
That's why you should always follow the instructions which include backing up your laf.img
Just treat the bin as it was an img
Sent from my LG-D855
---------- Post added at 08:13 AM ---------- Previous post was at 08:07 AM ----------
If done also some investigation, the "crash handler" is never called within the kernel, so it obviously has to happen somewhere outside, which makes it even more likely that LG patched something new in, I'll try to "disable" the handler and send you an image, would be great if you could check, if it's working out as I think @suljo94
Sent from my LG-D855
so if I understand well your kernel should work on every rom (including CloudyG3 1.1 wich is based on M firmware) ? The watchdog error comes from somewhere else right ?
A Nandroid backup made with TWRP can fully restore the phone to a good state if we have this watchdog error ?
atxbang56 said:
so if I understand well your kernel should work on every rom (including CloudyG3 1.1 wich is based on M firmware) ? The watchdog error comes from somewhere else right ?
A Nandroid backup made with TWRP can fully restore the phone to a good state if we have this watchdog error ?
Click to expand...
Click to collapse
Yes and no, the kernel is compatible with any rom and is confirmed working on Cloudy, but some face problems on 10L based roms, which is not directly rom related though.
Yes, a nandroid can restore it completely, currently this isn't even needed, but just a reboot fixes it.
Tectas said:
That's why you should always follow the instructions which include backing up your laf.img
Just treat the bin as it was an img
Sent from my LG-D855
---------- Post added at 08:13 AM ---------- Previous post was at 08:07 AM ----------
If done also some investigation, the "crash handler" is never called within the kernel, so it obviously has to happen somewhere outside, which makes it even more likely that LG patched something new in, I'll try to "disable" the handler and send you an image, would be great if you could check, if it's working out as I think @suljo94
Sent from my LG-D855
Click to expand...
Click to collapse
Okii Im ready to flash on you command. Do you want the boot. Img of L or are you ok
suljo94 said:
Okii Im ready to flash on you command. Do you want the boot. Img of L or are you ok
Click to expand...
Click to collapse
I've send you PM.
Tectas said:
I've send you PM.
Click to expand...
Click to collapse
quick update version 1.0 boots fine 1.6-1.7 are crashing
suljo94 said:
quick update version 1.0 boots fine 1.6-1.7 are crashing
Click to expand...
Click to collapse
Thanks, will check further
Sent from my LG-D855
Tectas said:
Thanks, will check further
Sent from my LG-D855
Click to expand...
Click to collapse
I think Neon might be the culprite but not sure
atxbang56 said:
so if I understand well your kernel should work on every rom (including CloudyG3 1.1 wich is based on M firmware) ? The watchdog error comes from somewhere else right ?
A Nandroid backup made with TWRP can fully restore the phone to a good state if we have this watchdog error ?
Click to expand...
Click to collapse
Tectas said:
That's why you should always follow the instructions which include backing up your laf.img
Just treat the bin as it was an img
Sent from my LG-D855
---------- Post added at 08:13 AM ---------- Previous post was at 08:07 AM ----------
If done also some investigation, the "crash handler" is never called within the kernel, so it obviously has to happen somewhere outside, which makes it even more likely that LG patched something new in, I'll try to "disable" the handler and send you an image, would be great if you could check, if it's working out as I think @suljo94
Sent from my LG-D855
Click to expand...
Click to collapse
mlopezh said:
hey guys, i need your help. i try to install the kernel but to back off i can´t do the install to mode download, because is has broken my laf.img
i has d855 latin american version 10L. and to try unzip kdz. with LG Firmware extract,
i can obtain the file laf_393216.bin, but i don´t know convert to .img
I hope any help your.
sorry my english is bad, but i try to improve.
regards and thank you all
Click to expand...
Click to collapse
Dears,
A million thanks for the help. Now the issue is that when trying to load the kernel. I wanted to try to turn back. and begin to call the kernel from a stock rom using kdz. the problem was that was saying to peruse the download mode was lost. and load the lif.img again. I could not get back the download mode. :crying:
is why we try to rescue it by LGFirmwareExtract. but this threw me a .bin file and it was then that complicates me.
I have now installed the TWRP on my d855. and CloudyG3 1.0 rom. I do not know if there is some method of recovery that way.
again I want to thank you for your help. :highfive:
Hello, is this kernel stable on every ROM, including the last updates 10M and 10N?
What do you suggest to be the best settings for governors and schedulers to get the best performance and which ones to have the best ratio performance/battery drain?
Thank you!
5k0tt said:
Hello, is this kernel stable on every ROM, including the last updates 10M and 10N?
What do you suggest to be the best settings for governors and schedulers to get the best performance and which ones to have the best ratio performance/battery drain?
Thank you!
Click to expand...
Click to collapse
1) yes, try it out!
2) Smartmax and row
5k0tt said:
Hello, is this kernel stable on every ROM, including the last updates 10M and 10N?
What do you suggest to be the best settings for governors and schedulers to get the best performance and which ones to have the best ratio performance/battery drain?
Thank you!
Click to expand...
Click to collapse
For life bether battery conservative and noope
jojobans said:
For life bether battery conservative and noope
Click to expand...
Click to collapse
But he wanted best performance/battery ratio
And which one for the best performance?
Hii
I can install kernel by app flashify??
mlopezh said:
Dears,
A million thanks for the help. Now the issue is that when trying to load the kernel. I wanted to try to turn back. and begin to call the kernel from a stock rom using kdz. the problem was that was saying to peruse the download mode was lost. and load the lif.img again. I could not get back the download mode. :crying:
is why we try to rescue it by LGFirmwareExtract. but this threw me a .bin file and it was then that complicates me.
I have now installed the TWRP on my d855. and CloudyG3 1.0 rom. I do not know if there is some method of recovery that way.
again I want to thank you for your help. :highfive:
Click to expand...
Click to collapse
I missed your post do you still need the laf.img
nice meet you
jojobans said:
Hii
I can install kernel by app flashify??
Click to expand...
Click to collapse
No, you have to boot the kernel through fastboot for now. Bump website will be released later and once the dev had bumped his kernel it will be a flashable zip. Until then, read the op of the dev thread.
Q&A for [OTA] romBUZZ v1.4 -October 17
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [OTA] romBUZZ v1.4 -October 17. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
how to install new OTA updates?
i am actually new to all this stuff n i loved your rom! i wanna know how to install the OTA updates that you've given..please give step wise instructions.....and it it enough to download the lastest version only or all the versions should be downloaded?
please reply asap. thnx agn!
adi8837 said:
i am actually new to all this stuff n i loved your rom! i wanna know how to install the OTA updates that you've given..please give step wise instructions.....and it it enough to download the lastest version only or all the versions should be downloaded?
please reply asap. thnx agn!
Click to expand...
Click to collapse
hey! just install v1.1 and then using the ota service from the device, update it.
or else, download all the updates from the thread and install them
Please help
Do i need to download version 1.3 directly or first il have to download v1.0..?
apuhira93 said:
Do i need to download version 1.3 directly or first il have to download v1.0..?
Click to expand...
Click to collapse
1.1 > 1.3 > 1.4
only 1.1 is big in size
EDIT I meant 1.0 > 1.1 > 1.3 > 1.4 > 1.5
Only 1.0 is big.
query
bro i have stock 4.4 rom of gionee elife e3 i extracted system and boot image also .As canvas 4 has same chip,ram,storage,resolution can you tell me how to port rom
Simply awesome
I never wrote a review on xda but this build just made me do so.Its the best stable rom out there right now.I love this rom.Looking forward for stable kitkat rom from pranjal
bhargav.k said:
bro i have stock 4.4 rom of gionee elife e3 i extracted system and boot image also .As canvas 4 has same chip,ram,storage,resolution can you tell me how to port rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2701283
Basically google "rom port mtk guide"
naruto1997 said:
I never wrote a review on xda but this build just made me do so.Its the best stable rom out there right now.I love this rom.Looking forward for stable kitkat rom from pranjal
Click to expand...
Click to collapse
Thank you
Kitkat is a bit out of the reach as of now because of lack of the kernel source.
downloading error
Guys! I am trying to download pranjals rom namely rom buzz but i am unable to download it... Can any one send me a link to download plz...
I want to download v1.0
pranjal18 said:
http://forum.xda-developers.com/showthread.php?t=2701283
Basically google "rom port mtk guide"
Thank you
Kitkat is a bit out of the reach as of now because of lack of the kernel source.
Click to expand...
Click to collapse
No problem.Do you make note 3 roms?
bro i have the system and boot image of gionee but meta-inf not having how to get it from stock rom as updater-script is needed
aishwar98 said:
Guys! I am trying to download pranjals rom namely rom buzz but i am unable to download it... Can any one send me a link to download plz...
I want to download v1.0
Click to expand...
Click to collapse
link is working. I checked. You check again.
naruto1997 said:
No problem.Do you make note 3 roms?
Click to expand...
Click to collapse
not at the moment. But I think Note 3 rom has already been ported to this device.
bhargav.k said:
bro i have the system and boot image of gionee but meta-inf not having how to get it from stock rom as updater-script is needed
Click to expand...
Click to collapse
You do not have meta-inf and updater script right?
You will have to make your own updater script...depending upon in which partition your system, boot, etc are. Google these two and you will find proper guide threads.
Also, you can use (after editing) another rom's updater script. That rom should belong to your device.
pranjal18 said:
link is working. I checked. You check again.
not at the moment. But I think Note 3 rom has already been ported to this device.
Click to expand...
Click to collapse
No i mean roms that i can flash on note 3.
naruto1997 said:
No i mean roms that i can flash on note 3.
Click to expand...
Click to collapse
No. Not working on those
unable to install rombuzz on canvas 4
I have checked your post regarding RomBUZZ rom and download all version.But at the time of installing by CWM method,but it was showing "INSTALLATION ABORTED".
kindly guide me.
AS per your query version is 1.0 and "installation aborted " after the selection of "apply update from sdcard" and then the selection of the ROM zip file.Is there are any process for ROM flash directly from PC.
regards,
S.Mahapatra
smahapatra said:
I have checked your post regarding RomBUZZ rom and download all version.But at the time of installing by CWM method,but it was showing "INSTALLATION ABORTED".
kindly guide me.
AS per your query version is 1.0 and "installation aborted " after the selection of "apply update from sdcard" and then the selection of the ROM zip file.Is there are any process for ROM flash directly from PC.
regards,
S.Mahapatra
Click to expand...
Click to collapse
Are you using Master Awesome's CWM recovery? The background colour of recovery should be Grey. The link is present in post 1.
guys i flashed a self created rom got boot loop so tried to backup rombuzz rom but started imei issue so flashed stock imei issue still there so followed karthiks method and solved issue but whenever i flash new rom i get imei issue how to solve permanently
karthik's method is?
Notification and music/radio
Hello,
I found a bug: when i listen music or fm radio and a notification arrive : the music stops playing, the screen is black and the power button is disabled.
LED notification flashes but nothing more.
The only solution is to remove the battery and cut the next time connexion data
Otherwise it is one of the most successful ROM I've tested, thank you !
pranjal18 said:
karthik's method is?
Click to expand...
Click to collapse
i used sn write tools and got my imei number back bro but again i flashed a rom same issue
bro i made a rom elie e3 kitkat system and boot.img in kitchen it created updater script itself the rom shows installation complete but stuck at boot loop how to make a kitkat rom using system and boot.img of other stock rom
Q&A for [ROM][UB][5.0.2][ZL]GZR Validus 7 ROM official builds {Linaro+Sabermod}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UB][5.0.2][ZL]GZR Validus 7 ROM official builds {Linaro+Sabermod}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
MHL
Support mhl for tgis rom..? If not, please,.,. Give me solution,. Im realy want this rom
Iebnoe.adja said:
Support mhl for tgis rom..? If not, please,.,. Give me solution,. Im realy want this rom
Click to expand...
Click to collapse
i didn't tried it i have no mhl cable.
if its not working there's no solution for now.
@alex when i try to apply white theme in the rom it doesnt chng to white but in candyrom the theme changes its color !!!!
Thats the price to use validus for now...not themable yet.
I mean yeah, u can theme, but frameworks been changed to black, so themers and validus head dev working on this kind of issue...
Not sure if its something I did wrong but I lost root after update. Supersu tried to update binary then said no root. Will try to install again.
Maybe is was something I did. Wiped caches and flashed ROM plus PA gapps and root is back. Awesome ROM thanks!
Optilicious said:
Not sure if its something I did wrong but I lost root after update. Supersu tried to update binary then said no root. Will try to install again.
Maybe is was something I did. Wiped caches and flashed ROM plus PA gapps and root is back. Awesome ROM thanks!
Click to expand...
Click to collapse
flash this in recovery next time it happens
Query on Recovery
Hello, Good Day!!!
I am currently using this ROM and I want to back up the this to try other ROMs. How can I back up this ROM since there are no back up feature in the CM Recovery?
Do I need to flash other kernel (example advance kernel) that has recovery to back up the ROM then reflash the CM kernel again?
Thank you,
PS: This is my first post.
Love the ROM.
MarkRamirez said:
Hello, Good Day!!!
I am currently using this ROM and I want to back up the this to try other ROMs. How can I back up this ROM since there are no back up feature in the CM Recovery?
Do I need to flash other kernel (example advance kernel) that has recovery to back up the ROM then reflash the CM kernel again?
Thank you,
PS: This is my first post.
Love the ROM.
Click to expand...
Click to collapse
flash twrp onto fota partition and make a nandbackup from it, or else use titanium backup pro app....or superbackup there's plenty
Thank for the quick reply.
Can you me a link for the procedures on flashing twrp onto fota? I'm afraid that i might use an incompatible procedures that may break my phone?
I cannot use titanium back up in case of bootloop right? I should use nandroid back up.
Sorry for being demanding.
Thanks in advance. :victory:
Alx31TLse said:
flash twrp onto fota partition and make a nandbackup from it, or else use titanium backup pro app....or superbackup there's plenty
Click to expand...
Click to collapse
MarkRamirez said:
Thank for the quick reply.
Can you me a link for the procedures on flashing twrp onto fota? I'm afraid that i might use an incompatible procedures that may break my phone?
I cannot use titanium back up in case of bootloop right? I should use nandroid back up.
Sorry for being demanding.
Thanks in advance. :victory:
Click to expand...
Click to collapse
i used xperia recovery manager .. there is a thread in the cross dev section ..
Hi,
Am I the only that cannot connect to Mobile Network using this rom? Wifi is working fine, however, when connecting thru mobile it cannot establish any connection. I've also encountered this in the new version of Candy5.
Thanks
MarkRamirez said:
Hi,
Am I the only that cannot connect to Mobile Network using this rom? Wifi is working fine, however, when connecting thru mobile it cannot establish any connection. I've also encountered this in the new version of Candy5.
Thanks
Click to expand...
Click to collapse
revert back to previous build as there are issues on calling from cm .
not had this issue in previous build or latest except calling
demonicangell™ said:
revert back to previous build as there are issues on calling from cm .
not had this issue in previous build or latest except calling
Click to expand...
Click to collapse
So the issue on calling affects the mobile network?
Thanks
MarkRamirez said:
So the issue on calling affects the mobile network?
Thanks
Click to expand...
Click to collapse
no, actually now i am facing this issue on ressurrection remix .. as many others are ..but on latest candyrom 1.0.0 i had 3g working just fine with clean wipe
demonicangell™ said:
no, actually now i am facing this issue on ressurrection remix .. as many others are ..but on latest candyrom 1.0.0 i had 3g working just fine with clean wipe
Click to expand...
Click to collapse
We had different experience since i do not have issue on calling on Candyrom. Just the mobile network.
Edit:
Have anyone here tried to install the Xposed for Lollipop?
Hi. How is battery life compared to Resurrection Remix mod ?
And what is not working/ buggy at the moment with this rom ?
in settings when you click on Privacy, it says backup & reset at the top...
also in 'the void/statusbar' 'clock style hidden' does not stay after a reboot or even after unlock screen the clock reapears but the setting says hidden... these things are bugs right?
what did cm12 have to change to fix the wakelocks on google services? something about mixmatched versions?
ham5 said:
in settings when you click on Privacy, it says backup & reset at the top...
also in 'the void/statusbar' 'clock style hidden' does not stay after a reboot or even after unlock screen the clock reapears but the setting says hidden... these things are bugs right?
what did cm12 have to change to fix the wakelocks on google services? something about mixmatched versions?
Click to expand...
Click to collapse
yes these are bugs
i didn't get you on mixmatched thing what u mean?
I suffer from the wakelock and was able to temporaly solve it by using privacy guard on the service... this is one link I found - http://www.reddit.com/r/Android/comments/2zrxwi/320_cm12_nightly_google_play_services_7x_wakelock/
Thanks to STEVE_MARS the roms cooker.
Google Translate from Spanish
Very good to everyone, compis.
I present my first Custom Rom for the new LeEco Le Pro2 X720, a piece of terminal that arrived yesterday.
It is based on the 20s version of EUI 5.9, with the following changelog:
- Clean of Chinese applications.
- Play Store installed.
- Synchronization of contacts and calendar with the Google account.
- Rooted.
- Busybox installed.
- Bloated.
- Changed the splash so that the boot is not in Chinese.
- Changed the animation boot by Google.
- Included Root Explorer.
- Including Google Pixel Launcher, for those who do not like the Launcher EUI.
- Including animated wallpapers of Google Pixel, very cool.
- Small and very light tweaks of performance improvements.
In my blog you have several catches, one of them with the punctuation of Antutu:
http://tars-lepro3.blogspot.com.es/
Download Link: https://mega.nz/#!n1UHEbaA!y1Z0Lkz7I...VbFqNaGcNlwutM
Click to expand...
Click to collapse
Original Thread
02/12/2016 Download T.A.R.S. 5.9.20s Final Version : Main Mirror
28/11/2016 Download T.A.R.S. 5.9.20s : Main Mirror
thanks....i am dl it....will try it to flash later...[emoji122]
so far so good..!!
i flashed it over the 20s with dalvik and cache clean only....no problem......and nice bootanimation..!!
one problem i have found out on 20s is...when i turn off the animations in developer options they do not stay off after i reboot the phone.... they`re on again...
Sent from my LEX720 using XDA-Developers mobile app
Peter-C said:
Thanks to STEVE_MARS the roms cooker.
Google Translate from Spanish
Original Thread
Download Link : Main Mirror
Click to expand...
Click to collapse
Many, many thanks my friend
I didn´t want to share my ROM yet, because I can´t test it. My phone will arrive this weekend (I hope so), but if you install it and all work fine, it´s great ¡¡¡¡ Well done ¡¡¡
I want do it better when I have my phone, I´ll check this rom and make best perfomance.
A big hug for you.
P.D. Sorry for my english... it´s a pity that I didn´t study more when I was young
STEVE_MARS said:
Many, many thanks my friend
I didn´t want to share my ROM yet, because I can´t test it. My phone will arrive this weekend (I hope so), but if you install it and all work fine, it´s great ¡¡¡¡ Well done ¡¡¡
I want do it better when I have my phone, I´ll check this rom and make best perfomance.
A big hug for you.
P.D. Sorry for my english... it´s a pity that I didn´t study more when I was young
Click to expand...
Click to collapse
Hi, so sorry that I didn't ask for the permission to share the Rom, your rom very fast and smooth. Thanks for your work hope you will get your device soon.
Peter-C said:
Hi, so sorry that I didn't ask for the permission to share the Rom, your rom very fast and smooth. Thanks for your work hope you will get your device soon.
Click to expand...
Click to collapse
Dont worry !!! Its ok!!!
I had read about problem of 2nd SIM if you install on x720 a developed rom of x727, because x727 hace only one SIM. I check it this when my phone arrive.
STEVE_MARS said:
Dont worry !!! Its ok!!!
I had read about problem of 2nd SIM if you install on x720 a developed rom of x727, because x727 hace only one SIM. I check it this when my phone arrive.
Click to expand...
Click to collapse
Does your ROM contain bootloader and baseband?
Thanks for your work.
Sent from my LEX727 using Tapatalk
phidung3721 said:
Does your ROM contain bootloader and baseband?
Thanks for your work.
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
No, my ROMs never contain bootloader and baseband. I think that this are a LeEco responsability, a wrong flash or this files may cause damage on our phones.
Youre welcome ¡
This rom Turkish Language?
Very good ROM so far
I'm still using your ROM since yesterday night and so far its solid and I removed even more leeco bloat with root uninstaller. So far your ROM has the lowest RAM usage by far.
When I do clear all recent apps still have a 2.6GB RAM free!
If there is anything you like to ask or know just reply and I will do my best to answer. I'm using the Chinese Leeco Le Pro 3 from Honorbuy (X720). Been flawless after rooting and flashing TWRP with the Grossoshop ROM and now yours.
klapcos said:
I'm still using your ROM since yesterday night and so far its solid and I removed even more leeco bloat with root uninstaller. So far your ROM has the lowest RAM usage by far.
When I do clear all recent apps still have a 2.6GB RAM free!
If there is anything you like to ask or know just reply and I will do my best to answer. I'm using the Chinese Leeco Le Pro 3 from Honorbuy (X720). Been flawless after rooting and flashing TWRP with the Grossoshop ROM and now yours.
Click to expand...
Click to collapse
I´m glad to hear this ¡¡¡
Two sims work fine, data and 4G, camera with all features?.
Many thanks.
STEVE_MARS said:
I´m glad to hear this ¡¡¡
Two sims work fine, data and 4G, camera with all features?.
Many thanks.
Click to expand...
Click to collapse
I only have 1 SIM and yes 4G works and tested the camera, all works fine. No issues yet....
I will off course report back during the week on how I get on with it.
I'm on three.ie network in Ireland FYI
On my device (X720) the Rom doesnt boot.
I wiped dalvik/Cache and data and installed the Rom.
Check if your file are wrong, download again please.
I dont test yet, but other users had installed it without problems.
STEVE_MARS said:
Check if your file are wrong, download again please.
I dont test yet, but other users had installed it without problems.
Click to expand...
Click to collapse
Hi,
i tryed out another time with a new twrp version.
But same problem.
It stucks on splash screen
i wiped dalvilk, cache, data and system before install rom.
I'm using with x720 Chinese model, all working perfectl can't find any issue yet. Thanks @STEVE_MARS
Sent from my LEX720 using Tapatalk
T.A.R.S 20s
Hi all,
I'd like to flash on Grossshop 18s.
just clean cache / dalwik cache and flash is OK?
enrealman said:
Hi all,
I'd like to flash on Grossshop 18s.
just clean cache / dalwik cache and flash is OK?
Click to expand...
Click to collapse
Yes, it worked for me. Made a backup in case.
meuhmeuh51 said:
Yes, it worked for me. Made a backup in case.
Click to expand...
Click to collapse
thanks for reply. one more question, turkish language available in this rom?
enrealman said:
thanks for reply. one more question, turkish language available in this rom?
Click to expand...
Click to collapse
sorry I do not know. I'm on cm13 right now.
I tryed another time.
i flashed over my 17s the GrossoShop 18s Rom. That worked and the rom boots.
After that i flashed the T.A.R.S. Rom over my GrossoShop 18s Rom and wiped cache and dalvik.
But it still stucks in splash screen
I tried also another 20s Rom. "V2_LE_ZL1_LEX720-CN-FN-WAXCNFN5902011181S-5.9.020S". This Rom stucks in TWRP when installing on "patching system image unconditionally"