Hi I just got my 360 and like it so far but am using it walking and running so wouldn't mind replacing the leather band with a rubber/silicone that is better when you are sweating. Anyone have any suggestions?
TYLT silicone? Good review from what I seen
Id really like to not spend $30 on a non leather metal band
nmeurett said:
Id really like to not spend $30 on a non leather metal band
Click to expand...
Click to collapse
Any 22mm silicone band should work. I'm using the band that came with my LG G Watch.
Related
Deciding to go for leather strap or steel band on Moto 360 is difficult.
Leather Strap : i know it will fit well but does not look good.
Steel Band : Looks better but not sure if it will fit when I get it. ( the only reason stopping me from buying it )
I would like to buy the Steel Band Moto 360 only if i know it will fit perfectly on my wrist. I do not want to buy it then have to find a jeweler.
Anyone got any info on how the Steel Band works? it only sells in one size.
You can take any metal band to a watch store or jeweler and have them remove links to make it fit
dynamic entry said:
Deciding to go for leather strap or steel band on Moto 360 is difficult.
Leather Strap : i know it will fit well but does not look good.
Steel Band : Looks better but not sure if it will fit when I get it. ( the only reason stopping me from buying it )
I would like to buy the Steel Band Moto 360 only if i know it will fit perfectly on my wrist. I do not want to buy it then have to find a jeweler.
Anyone got any info on how the Steel Band works? it only sells in one size.
Click to expand...
Click to collapse
i have the official stainless steel band. For me (with a big wrist) it only needs one link to be a little freer. The perimeter of the band is approximately 14.6 cm
It comes with 4 extra links so you have some room for bigger or smaller wrist.
dynamic entry said:
Deciding to go for leather strap or steel band on Moto 360 is difficult.
Leather Strap : i know it will fit well but does not look good.
Steel Band : Looks better but not sure if it will fit when I get it. ( the only reason stopping me from buying it )
I would like to buy the Steel Band Moto 360 only if i know it will fit perfectly on my wrist. I do not want to buy it then have to find a jeweler.
Anyone got any info on how the Steel Band works? it only sells in one size.
Click to expand...
Click to collapse
If you have the light steel watch and not using the extra links I can really use them... I'll buy them off you.
Hi!
I am wondering if the plastic "protector" comes with the official separate metal bands for $80?
The plastic "protector" is included with the new metal moto 360 models, but I'm not sure if it's only them or if they are being sold with the separate metal bands $80 at att.com aswell..
Why do I want to know? Well... I visited the watchmaker, he doesn't want to put on a custom metal band because "it will crack without some kind of protection". I believe him because thats probably why motorola added the plastic protector on their official 22" metal moto 360 editions. Also I wanted a more narrow band since I am thin - can only do that if I get a hold of the plastic protector for the 18 inch thinner metal bands that are not released yet
?
anyone who bought it and can answer?
We will once we receive them... Dec 5 was the availability date at the time of ordering, and that was the first hour they were posted on Moto's site.
Sent from Note 3
edit
Wait can the protector be brought separate or its only for the newer models?
Yes the plastic protectors are included with the official metal bands. I just picked up the band replacement kit during lunch today at my local best buy.
Cool... Not sold separately?
Not from what I have seen.. They do make the fit of the new metal band to be very snug against the watch itself.
I bought one of the Kriesler bands. They do NOT come with the plastic piece. Shame. They do look great however. If you have very large hands like mine, I only had to take out one link to let it get over my hand.
I can confirm that the OEM metal bands come with the plastic spacers, same as the metal band Moto 360's
Just had an online chat with Motorola support. I'll give an update about buying the spacer separately, when they get back to me.
apallohadas said:
Just had an online chat with Motorola support. I'll give an update about buying the spacer separately, when they get back to me.
Click to expand...
Click to collapse
Just a heads up - if you're looking to use them with non-Moto bands, I'm not sure it's going to work.
The Moto bands slide into two slots on the plastic connectors for a snug fit. Other bands are solid all the way across - if you were to take off their connector, the links would have to be the same size as the Moto bands.
vansmack said:
Just a heads up - if you're looking to use them with non-Moto bands, I'm not sure it's going to work.
The Moto bands slide into two slots on the plastic connectors for a snug fit. Other bands are solid all the way across - if you were to take off their connector, the links would have to be the same size as the Moto bands.
Click to expand...
Click to collapse
I know the Pebble Steel metal band fits on the moto 360( it has the right fitting, its not full), but can someone tell me the spacer for the original metal band fits the pebble steel one? Or has someone found a way to get an other spacer?
Dkouyou said:
I know the Pebble Steel metal band fits on the moto 360( it has the right fitting, its not full), but can someone tell me the spacer for the original metal band fits the pebble steel one? Or has someone found a way to get an other spacer?
Click to expand...
Click to collapse
The Pebble Steel Band does not fit in the plastic spacer provided with the Official Motorola Metal band.
I have a replacement watch arriving today, which will require me to move the official metal band from one watch to the other and I will take a photo to show you all what I am talking about.
Just ordered the official metal band from Motorola site today. Does anyone know if the included plastic spacers will prevent the back of the watch from cracking? I have read of so many people who have cracked the back of there 360 even with the stock leather bands. Can someone who has already gotten the metal bands from Motorola confirm that the spacers relieve the pressure against the back of the watch.
AndroiderM said:
Just ordered the official metal band from Motorola site today. Does anyone know if the included plastic spacers will prevent the back of the watch from cracking? I have read of so many people who have cracked the back of there 360 even with the stock leather bands. Can someone who has already gotten the metal bands from Motorola confirm that the spacers relieve the pressure against the back of the watch.
Click to expand...
Click to collapse
They do.
There has been one photo showing the plastic spacer breaking from the stress, but I've had mine for a week and the spacer is fine. It's been too small a sample size to say the back won't crack but just a few days in I'm feeling much better about it.
The watch is much heavier now, though.
vansmack said:
They do.
There has been one photo showing the plastic spacer breaking from the stress, but I've had mine for a week and the spacer is fine. It's been too small a sample size to say the back won't crack but just a few days in I'm feeling much better about it.
The watch is much heavier now, though.
Click to expand...
Click to collapse
Thanks for the info, so the band is definitely a higher quality then say the pebble steel bands?
AndroiderM said:
Thanks for the info, so the band is definitely a higher quality then say the pebble steel bands?
Click to expand...
Click to collapse
Definitely. Both in looks (it's thicker and shinier with a color that is the same as the 360) and material weight. It's heavier than the Pebble Band.
I know a number of people will say that they can get the same thing for less, but if you've purchased watch bands before, you'll find this one to be of a solid quality.
Whether or not it's worth $80 will be up to each individual, but for me it's worth it if it stops the back from cracking because of the spacer..
Dkouyou said:
I know the Pebble Steel metal band fits on the moto 360( it has the right fitting, its not full), but can someone tell me the spacer for the original metal band fits the pebble steel one? Or has someone found a way to get an other spacer?
Click to expand...
Click to collapse
Here are some photos to show you what I'm talking about. That spacer seems to be tailor made for the Moto band in how it slots in:
Had the leather band, and there were no cracks when i swapped to the Motorola metal band. 1 week later and there's a tiny crack starting in the corner. I'm going to just live with it and see how much it grows.
Hi guys,
Im fairly happy with my moto 360, I have the silver one with a leather stock band.
Altough I like the metal band more..
So, I have a simple question.
Can i put a metal band on, without cracking the back of the moto 360?
If so, wich one?
Thanks
ALSO : Is the stock leather band water proof? So for example, I take a shower or bath, it wont screw up the band?
Try the official steel band that Motorola has released for our watch. The official metal band has plastic sleeves that insert into the holes that prevent the cracking of the back.. You can also try the pebble steel band. I used the pebble steel band before I got the official metal band and I have no cracking on the back, but ur luck might vary.
Yeah, I did try the pebble steel band. It cracked the whole back.. Luckily for me I got a replacement !
Also, is the stock leather band water proof? So I can take a shower or bath with it?
Thanks
Deltastylez said:
Yeah, I did try the pebble steel band. It cracked the whole back.. Luckily for me I got a replacement !
Also, is the stock leather band water proof? So I can take a shower or bath with it?
Thanks
Click to expand...
Click to collapse
No, the leather is not waterproof. It stains and absorbs moisture. I had to dye my band a dark color to remove the staining from water and sweat.
Alright thanks
I think i have to replace it later this year. My band is already begon to recolor.. *sad face*
And you can sea the sweat on the inside of the band ..
Deltastylez said:
Alright thanks
I think i have to replace it later this year. My band is already begon to recolor.. *sad face*
And you can sea the sweat on the inside of the band ..
Click to expand...
Click to collapse
I personally have fitted a Pebble Steel band to my watch, there are other bands available on amazon with various styles.
I would like to get the official band but its not for sale in my country.
You may need to buy a tool to help you take off the leather band as I found this a bit fiddly.
When you look to buy a new watch band, make sure that there is a notch cut out at the top of the strap. There are other threads that mention this.
theickleone said:
I personally have fitted a Pebble Steel band to my watch, there are other bands available on amazon with various styles.
I would like to get the official band but its not for sale in my country.
You may need to buy a tool to help you take off the leather band as I found this a bit fiddly.
When you look to buy a new watch band, make sure that there is a notch cut out at the top of the strap. There are other threads that mention this.
Click to expand...
Click to collapse
Yeah, I had the pepple steel band to. But after that, my back got cracked.
Not sure if its due the pepple band, or due something else?
Deltastylez said:
Yeah, I had the pepple steel band to. But after that, my back got cracked.
Not sure if its due the pepple band, or due something else?
Click to expand...
Click to collapse
From what I have seen, the design of the Pebble Steel band puts pressure on the back of the watch - Which causes it to crack.
The official Moto 360 band has a special link design and spacer to negate this, I'm worried that this will happen to my watch and I am tempted to put the leather strap back on .
Although I've ordered a cheap strap from eBay that mimics the official design.
Ive had pebble band on my 360 since decembre ....no crack here ....
Sent from my HTC One_M8 using XDA Free mobile app
Is there any one that can tell me, if I can take a shower with de stone leather band?
Or is that really bad for the leather band?
I hope someone can help
Deltastylez said:
Is there any one that can tell me, if I can take a shower with de stone leather band?
Or is that really bad for the leather band?
I hope someone can help
Click to expand...
Click to collapse
The band will stain. Also it absorbs water so ends up getting smelly.
Hi,
My zenwatch is finally on it's way, and i'm thinking of getting another strap.
Do you think the following watchband will fit the zenwatch?
http://www.ebay.com/itm/19139693033...rkparms=gh1g=I191396930334.N8.S1.M1459.R1.TR2
Thanks!
Pretty much any 22mm band will work. I have couple of bands, and usually alternate between a metal mesh and a leather nato strap. The only problem with the Nato is that I have to take the strap out every night to charge.
Do you have links for where to buy the straps you got? I want to take a look.
And why you have to take the strap off? On what it's depand?
Thank you
I bought them off of Ebay. This is real similar to the Nato strap I bought: http://www.ebay.com/itm/Honey-Brown...t=LH_DefaultDomain_3&var=&hash=item4ae9dd2397 And this looks just like the metal mesh band: http://www.ebay.com/itm/22MM-SILVER...980?pt=LH_DefaultDomain_0&hash=item4196989fa4
Nato style straps cover the back of the watch so on the Zenwatch, the charging pins are covered. If you go with a nato strap, get a pair of watch pins. I recommend quick release like http://www.fandebnb.com/quick-release-spring-bars-pair/
so that they are easy to remove, just like the original band the Zenwatch comes with.
Will these band watch fit a zenwatch 1?
http://www.ebay.com/itm/Milanese-St...hash=item2ef048e207:m:mUgVaVeRHFQYegDDnuKwQ5A
AlexsamaM said:
Will these band watch fit a zenwatch 1?
http://www.ebay.com/itm/Milanese-St...hash=item2ef048e207:m:mUgVaVeRHFQYegDDnuKwQ5A
Click to expand...
Click to collapse
I would think so. We need a 22 mm band as well.
Sent from my SM-G930V using XDA-Developers mobile app
So I got this recently looking for Apple Watch like silicone bands for the HW. It's pretty much the leather loop band that was first advertised for the Apple Watch. It's probably more pleather than leather but it holds securely magnetically and fits pretty well once you break it in a couple of days. I got it for ~$12 (includes shipping) off of AliExpress and there are 4 colors.
http://www.aliexpress.com/item/link-bracelet-Loop-For-huawei-watch-band-Genuine-Leather-strap-Adjustable-Magnetic/32636980542.html
There also seems to be an Amazon source now but for ~$27.
https://www.amazon.com/Replacement-Released-Bracelet-Smartwatch-Adjustable/dp/B01FFNJZ20/ref=sr_1_3?ie=UTF8&qid=1471335890&sr=8-3&keywords=huawei+watch+leather+loop+band
Panzer500 said:
So I got this recently looking for Apple Watch like silicone bands for the HW. It's pretty much the leather loop band that was first advertised for the Apple Watch. It's probably more pleather than leather but it holds securely magnetically and fits pretty well once you break it in a couple of days. I got it for ~$12 (includes shipping) off of AliExpress and there are 4 colors.
http://www.aliexpress.com/item/link-bracelet-Loop-For-huawei-watch-band-Genuine-Leather-strap-Adjustable-Magnetic/32636980542.html
There also seems to be an Amazon source now but for ~$27.
https://www.amazon.com/Replacement-Released-Bracelet-Smartwatch-Adjustable/dp/B01FFNJZ20/ref=sr_1_3?ie=UTF8&qid=1471335890&sr=8-3&keywords=huawei+watch+leather+loop+band
Click to expand...
Click to collapse
Definitely pleather but nice looking and a new option for bands for us, Thanks.
Milimbar said:
Definitely pleather but nice looking and a new option for bands for us, Thanks.
Click to expand...
Click to collapse
You're welcome though I'm still hoping to find those Apple Watch style silicone bands. I'm not a fan of the current ones on the market simply due to the metal clasps looking uncomfortable if I was to use them as gym wear.