Develop Bugs

OTA Update for rooted g pad

Hi!
Has anyone installed the update OTA on a rooted g pad?
Is it safe to do it or it's not possible?
How can I install the update if I am rooted and keep my root?

goldengutz13 said:
Hi!
Has anyone installed the update OTA on a rooted g pad?
Is it safe to do it or it's not possible?
How can I install the update if I am rooted and keep my root?
Click to expand...
Click to collapse
I have seen people reporting problems in other threads here on XDA. Here in the US they haven't yet released the OTA update. If this is anything like my experience with my phone (a GS3). OTA update of a factory rom when rooted often does seem to cause problems. The only device I haven't had problems with taking an OTA when rooted were a Nexus device (Nexus 7) and something running CyanogenMod.

muiriddin said:
I have seen people reporting problems in other threads here on XDA. Here in the US they haven't yet released the OTA update. If this is anything like my experience with my phone (a GS3). OTA update of a factory rom when rooted often does seem to cause problems. The only device I haven't had problems with taking an OTA when rooted were a Nexus device (Nexus 7) and something running CyanogenMod.
Click to expand...
Click to collapse
so I have to unroot it first, install update then root again?

I have a related question - how to unroot and install OTA??
I tried to install, but it didn´t work, tablet said there´s no OTA for rooted devices.
I unrooted using SuperSU, but the situation is still the same.

Dekxster said:
I have a related question - how to unroot and install OTA??
I tried to install, but it didn´t work, tablet said there´s no OTA for rooted devices.
I unrooted using SuperSU, but the situation is still the same.
Click to expand...
Click to collapse
I used the LG Support Tool method which involves putting the tablet into download mode and doing the update recovery procedure in the LG Support Tool. This (after a long download process) should result in a tablet which is identical to what came in the box. (in the US the procedure currently installs 4.2.2). When it finished the download and install, it reboots the tablet, if you then are stuck in a boot loop, simply do the key combination for a factory reset and it then should boot.
The unroot procedure via SuperSU does seem to leave something behind that the OTA still detects...
If you need further details I have another post in one of these threads detailing exactly what I did...
---------- Post added at 01:05 PM ---------- Previous post was at 01:01 PM ----------
goldengutz13 said:
so I have to unroot it first, install update then root again?
Click to expand...
Click to collapse
That is what I plan on doing once the US version is released, however it is potentially a little more complicated since I have heard that LG has patched the LOKI vulnerability which means no custom roms or custom recovery until a new boot loader vulnerability is found, or until you revert to the original boot loader instead of the new one in the 4.4.2 release (if possible)...

muiriddin said:
That is what I plan on doing once the US version is released, however it is potentially a little more complicated since I have heard that LG has patched the LOKI vulnerability which means no custom roms or custom recovery until a new boot loader vulnerability is found, or until you revert to the original boot loader instead of the new one in the 4.4.2 release (if possible)...
Click to expand...
Click to collapse
Nah. You can bet that within 48 hours after the US version is released, there will be a flashable build available with root and recovery.

Subtleone said:
Nah. You can bet that within 48 hours after the US version is released, there will be a flashable build available with root and recovery.
Click to expand...
Click to collapse
True, more than likely a flash-able version will exist once someone makes it.

It already has a work around for loki by reinstalling the old aboot
http://forum.xda-developers.com/showthread.php?t=2698267
Just do steps 2 and 3.
Works fine on mine
Sent from my LG-V500 using xda app-developers app

I upgraded Via OTA my rooted lgpad and when it rebooted... stuck in recovery.
So i had to flash with lg tool.
I did not lose any data but a bit of time.
My suggestion is to flash with lg tool and then root again.
sent from tablet

I think the issue with this procedure is the recovery / bootloader, not the rooting itself. Still, you will most likely end with an unbootable OS. You are better off flashing via recovery a perfectly stock, pre-rooted image, like this http://forum.xda-developers.com/showthread.php?t=2707363

Trunkam said:
I upgraded Via OTA my rooted lgpad and when it rebooted... stuck in recovery.
So i had to flash with lg tool.
I did not lose any data but a bit of time.
My suggestion is to flash with lg tool and then root again.
sent from tablet
Click to expand...
Click to collapse
When you use the lg tool (pc software) did it automatically download the kitkat update?
Did you encounter any issue when you used lg tool?

Trunkam said:
I upgraded Via OTA my rooted lgpad and when it rebooted... stuck in recovery.
So i had to flash with lg tool.
I did not lose any data but a bit of time.
My suggestion is to flash with lg tool and then root again.
sent from tablet
Click to expand...
Click to collapse
So you did NOT unroot first?
Steps you did were: (with rooted only g pad)
Update via pc lg tool
Root using IOROOT25.zip method
This correct?

goldengutz13 said:
When you use the lg tool (pc software) did it automatically download the kitkat update?
Did you encounter any issue when you used lg tool?
Click to expand...
Click to collapse
I had to click on "recover" Something sorry I have no my PC now.. I left it at work. But I think you'll find.
U got some option and considering lgpad did not boot after update.. I had only one.
It's the procedure that you got to follow after you set gpad in download mode.
No issue at all, just one thing: after rooting you will have to flash a custom recovery if you need, because flashing with lg, flash even lg stock recovery.
erwaso said:
So you did NOT unroot first?
Steps you did were: (with rooted only g pad)
Update via pc lg tool
Root using IOROOT25.zip method
This correct?
Click to expand...
Click to collapse
No I did not unroot.. But only because I did not think about it. And that's the reason why gpad was not able to boot to system and I had to flash it via lg software.
I set gpad in download mode,,then flash via lg software, root with ioroot and finally flashed with flashify custom recovery
Hope to have helped guys
Now I'll go to sleep!
tapatalked..

I updated to version 4.4.2 Via OTA my rooted gpad and not had any problems
Steps:
1- factory reset
2- update via OTA
Attention: I think the rom has to be original (no eliminated sys apps with titanium or other) because it goes check the integrity of the rom (4.2.2)
------------------------------------------------------------ Edit --------------------------------------------------------------------------
3- Rooted with IOroot25

I've done an OTA update on my rooted G Pad, no issues either. I didn't do a factory reset, just did the update.

I updated my rooted v500 2 days ago using LGs PC software. The process took around 45 minutes and resulted in a successful KitKat update, however I no longer have root. I have a few strange issues with random unmounting of the SD card, which happened about 4 times while Play Music was copying 2gig of on device songs to it. I also seem to have lost quiet mode - maybe it's been moved out of the sound settings menu - would appreciate a comment if anyone knows where it is.
Sent from my LG-V500 using Tapatalk

Hugo-PT said:
I updated to version 4.4.2 Via OTA my rooted gpad and not had any problems
Steps:
1- factory reset
2- update via OTA
Attention: I think the rom has to be original (no eliminated sys apps with titanium or other) because it goes check the integrity of the rom (4.2.2)
Click to expand...
Click to collapse
I froze a few apps using rom toolbox, think that would matter?
---------- Post added at 07:29 AM ---------- Previous post was at 07:28 AM ----------
GePeKo said:
I updated my rooted v500 2 days ago using LGs PC software. The process took around 45 minutes and resulted in a successful KitKat update, however I no longer have root. I have a few strange issues with random unmounting of the SD card, which happened about 4 times while Play Music was copying 2gig of on device songs to it. I also seem to have lost quiet mode - maybe it's been moved out of the sound settings menu - would appreciate a comment if anyone knows where it is.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
The development section has a thread on IOROOT and it works. Have at it! I'll do this whole thing when the kids nap lol

erwaso said:
I froze a few apps using rom toolbox, think that would matter?
Click to expand...
Click to collapse
with frozen apps you shall have no problems.

installing recovery

Hello everyone I just had a question about recover, a little while back I had cwm on my phone but then I did a full restore and am on stock rooted kit Kat. The first time I installed the cwm recovery I used freegee, but I've seen people say that it doesn't work on the software I am on which is E98020H, can anyone confirm that it doesn't work and is there another way? Thank you.

nsh121193 said:
Hello everyone I just had a question about recover, a little while back I had cwm on my phone but then I did a full restore and am on stock rooted kit Kat. The first time I installed the cwm recovery I used freegee, but I've seen people say that it doesn't work on the software I am on which is E98020H, can anyone confirm that it doesn't work and is there another way? Thank you.
Click to expand...
Click to collapse
have you got anywhere?

nsh121193 said:
Hello everyone I just had a question about recover, a little while back I had cwm on my phone but then I did a full restore and am on stock rooted kit Kat. The first time I installed the cwm recovery I used freegee, but I've seen people say that it doesn't work on the software I am on which is E98020H, can anyone confirm that it doesn't work and is there another way? Thank you.
Click to expand...
Click to collapse
Unless I am doing something completely wrong... it is not working for me either. I'm on E98020h and I was not even able to root with kitkat root tool. I wound up using Root Genius to root, and was able to get root access for apps like FreeGee, titanium backup, etc.. However Freegee is littered with errors. Upon opening I get an error message saying there is an "exception thrown waiting for command to finish" and then the next error window says that "your aboot is not supported by loki on software version: E98020h." After that the app seems fine, everything is there, but when I go to flash CWM-6.0.4.7 I get another error message, this time saying "There was an error running action "loki_recovery."
No clue, might just be me, but I have tried some other methods as well (including rooting, using voodoo root protector, update to e98020h, and then try freegee) but still nothing.

frankp124 said:
Unless I am doing something completely wrong... it is not working for me either. I'm on E98020h and I was not even able to root with kitkat root tool. I wound up using Root Genius to root, and was able to get root access for apps like FreeGee, titanium backup, etc.. However Freegee is littered with errors. Upon opening I get an error message saying there is an "exception thrown waiting for command to finish" and then the next error window says that "your aboot is not supported by loki on software version: E98020h." After that the app seems fine, everything is there, but when I go to flash CWM-6.0.4.7 I get another error message, this time saying "There was an error running action "loki_recovery."
No clue, might just be me, but I have tried some other methods as well (including rooting, using voodoo root protector, update to e98020h, and then try freegee) but still nothing.
Click to expand...
Click to collapse
Loki hasn't been updated in months. I think we just have to hold tight until they update it to include the new aboot that comes with e98020h. I'm stuck at the same place. No big deal since I have root, but would be nice to get into CWM (safely) and back the phone up.
---------- Post added at 04:08 PM ---------- Previous post was at 03:54 PM ----------
frankp124 said:
Unless I am doing something completely wrong... it is not working for me either. I'm on E98020h and I was not even able to root with kitkat root tool. I wound up using Root Genius to root, and was able to get root access for apps like FreeGee, titanium backup, etc.. However Freegee is littered with errors. Upon opening I get an error message saying there is an "exception thrown waiting for command to finish" and then the next error window says that "your aboot is not supported by loki on software version: E98020h." After that the app seems fine, everything is there, but when I go to flash CWM-6.0.4.7 I get another error message, this time saying "There was an error running action "loki_recovery."
No clue, might just be me, but I have tried some other methods as well (including rooting, using voodoo root protector, update to e98020h, and then try freegee) but still nothing.
Click to expand...
Click to collapse
Found a temporary solution.
http://forum.xda-developers.com/showthread.php?t=2371927&page=43
flash the CWM from this thread. At least allows you the ability to get into CWM and do backups, etc...

nsh121193 said:
Hello everyone I just had a question about recover, a little while back I had cwm on my phone but then I did a full restore and am on stock rooted kit Kat. The first time I installed the cwm recovery I used freegee, but I've seen people say that it doesn't work on the software I am on which is E98020H, can anyone confirm that it doesn't work and is there another way? Thank you.
Click to expand...
Click to collapse
Here's what you do to be able to install freegee cwm recovery successfully and also obtain root.
1.) Download towelrrot app from www.towelroot.com (much appreciation to Geohot). One click and you are rooted.
2.) Download busybox from playstore. Install.
3.) Download GPRO cwm 6.0.4.4 recovery apk (look for it on the attached files area of G3 rom v 4.7 on the android section of our phone). Run app and install recovery but don't reboot afterwards.
4.)Run Freegee. It should install freegee cwm or twrp by then.

i tried this sadly freegee still getting hung on a boot error...

Couldn't you just flashtool back to stock jb then root and install recovery........
2SHAYNEZ
---------- Post added at 09:46 PM ---------- Previous post was at 09:45 PM ----------
Then flash easykat and boom you have stock kk and recovery
2SHAYNEZ

shayneflashindaily said:
Couldn't you just flashtool back to stock jb then root and install recovery........
2SHAYNEZ
---------- Post added at 09:46 PM ---------- Previous post was at 09:45 PM ----------
Then flash easykat and boom you have stock kk and recovery
2SHAYNEZ
Click to expand...
Click to collapse
this work for me thanks

rcorvo1 said:
this work for me thanks
Click to expand...
Click to collapse
No problem hit that thanks button for people who help you out and have a great day sir :thumbup:
2SHAYNEZ

im so stuck on this with e98020h.
new to optimus g pro so super lost. Any help would be awesome. Used towelroot. Could not install twrp or else it did install and i cant boot into recovery for some reason. Installed SuperSU with no problems.

briandresstoyota said:
im so stuck on this with e98020h.
new to optimus g pro so super lost. Any help would be awesome. Used towelroot. Could not install twrp or else it did install and i cant boot into recovery for some reason. Installed SuperSU with no problems.
Click to expand...
Click to collapse
You're on stock Kitkat. Use GPRO_recovery.apk, after that update recovery to something newer (TWRP prefered) and voila, you're ready to go.
Or start from stock Jellybean, unlock via Freegee and update recovery. You'll get a better flashing base (smaller chances for hardware wakelocks).

Yeah I finally worked through it last night. Towel root. Gpro recovery. Then installed busy box and flashed latest twrp with flashify and got to flashing my ROMs. Hey BTW which ROM/kernel do you get the best battery life with?
Sent from my LG-E980 using XDA Free mobile app

briandresstoyota said:
Yeah I finally worked through it last night. Towel root. Gpro recovery. Then installed busy box and flashed latest twrp with flashify and got to flashing my ROMs. Hey BTW which ROM/kernel do you get the best battery life with?
Sent from my LG-E980 using XDA Free mobile app
Click to expand...
Click to collapse
I'm still on KitKat (custom build of PAC-ROM 4.4.4, with my own kernel) and I get pretty good SOT (~5h) and maybe a day-day and a half of one charge. Haven't used Lollipop ROMs much, they are too unstable for my needs (mostly problems with overheating and phone not sleeping properly) and I'm too lazy to sync repos and do a custom build, but CM12.1 with Emmanuel's kernel was OK for me for a long time. Please note, I was using older CM build (01.06.2015) because of the SIM bug which is not patched yet.

blitzkriegger said:
Here's what you do to be able to install freegee cwm recovery successfully and also obtain root.
1.) Download towelrrot app from www.towelroot.com (much appreciation to Geohot). One click and you are rooted.
2.) Download busybox from playstore. Install.
3.) Download GPRO cwm 6.0.4.4 recovery apk (look for it on the attached files area of G3 rom v 4.7 on the android section of our phone). Run app and install recovery but don't reboot afterwards.
4.)Run Freegee. It should install freegee cwm or twrp by then.
Click to expand...
Click to collapse
Friend gave me his e980, and was stuck trying to install recovery. This worked (step 2-4). I was rooted but couldnt get recoveries to install. Thanks!!!! :good::good:

ThoR294 said:
Friend gave me his e980, and was stuck trying to install recovery. This worked (step 2-4). I was rooted but couldnt get recoveries to install. Thanks!!!! :good::good:
Click to expand...
Click to collapse
to run freegee you need stuck 4.1.2 android.

[Q] How to get OTA update to take on rooted device

Device was rooted with PurpleDrake, works fine on D85110c, but I'd like the new OTA. I get the OTA notification all the time, but I can't get it to "take". It says installing, reboots and I'm still on the old one. I had Xposed installed with some modules, but uninstalled it all. Any tips on how to make the OTA work, and can I just use PurpleDrake after the OTA to re-root?
Thanks for your patience with the noobtastic post.

I am also freshly rooted with PurpleDrake on 10c with twrp installed. Because of the OTA update, I am not flashing any ROMs until I figure out what to do. I am using a G3 851 on AT&T, so I'm not sure what an update will do. Will it mess with my unlock or APN settings? I'm coming from an HTC M7, so still trying to get myself mentally sound on this device before I just go flash happy all over the place. I'd like to flash a custom rom, but weary if I should update first. I see the zone rom is for the new update, so I guess I'd have to update to run his ROM. Skydragon is still 10c I believe. Any ideas? Sorry to hijack your thread. Lol

Guys, you really should search the forums for an answer. There are numerous threads in regards to the OTA as wll as guides. Your are lucky that the OTA did not apply while rooted. If you happen to also have a custom recovery installed you could have caused yourself a bootloop and would have been stuck. Search option is your friend.
In any case, it is pretty easy to update. Use the link I provided below to install download and install the latest 10m ROM. Just make sure you have everything backed up first, as the preferred method is to wipe everything. I just completed this myself this weekend and all went smooth. Once installed, just root again with PurpleDrake. Installing the permroot appears like it fails and the window closes, but it indeed applies root. You will then just need to download SU and Busybox. Additionally if you want custom recovery, use TWRP manager from play store and install the latest 2.8.01 recovery. Again, all easy if you read the threads. Good luck
http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
---------- Post added at 07:44 AM ---------- Previous post was at 07:43 AM ----------
whodatfan said:
I am also freshly rooted with PurpleDrake on 10c with twrp installed. Because of the OTA update, I am not flashing any ROMs until I figure out what to do. I am using a G3 851 on AT&T, so I'm not sure what an update will do. Will it mess with my unlock or APN settings? I'm coming from an HTC M7, so still trying to get myself mentally sound on this device before I just go flash happy all over the place. I'd like to flash a custom rom, but weary if I should update first. I see the zone rom is for the new update, so I guess I'd have to update to run his ROM. Skydragon is still 10c I believe. Any ideas? Sorry to hijack your thread. Lol
Click to expand...
Click to collapse
I also amd running the Tmobile 851 on AT&T. After update it's no different than what you did the first time, just setup and re-enter the appropriate APN settings. Reboot and your done / back on AT&T network.

OK I think I may be stuck. I gave my phone to wife to check something on the internet and when the notification came up for the update she accepted it. Then handed me my phone back because it got stuck on the TWRP loop. Is there anything to do to get out of this loop? I tried restore from one of my back saves without any luck. Never mind I was able to install the stock ROM in TWRP and got out of the boot loop. Trying to fix and get root and TWRP back now to restore one.

cbb77 said:
Guys, you really should search the forums for an answer. There are numerous threads in regards to the OTA as wll as guides. Your are lucky that the OTA did not apply while rooted. If you happen to also have a custom recovery installed you could have caused yourself a bootloop and would have been stuck. Search option is your friend.
In any case, it is pretty easy to update. Use the link I provided below to install download and install the latest 10m ROM. Just make sure you have everything backed up first, as the preferred method is to wipe everything. I just completed this myself this weekend and all went smooth. Once installed, just root again with PurpleDrake. Installing the permroot appears like it fails and the window closes, but it indeed applies root. You will then just need to download SU and Busybox. Additionally if you want custom recovery, use TWRP manager from play store and install the latest 2.8.01 recovery. Again, all easy if you read the threads. Good luck
http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
---------- Post added at 07:44 AM ---------- Previous post was at 07:43 AM ----------
I also amd running the Tmobile 851 on AT&T. After update it's no different than what you did the first time, just setup and re-enter the appropriate APN settings. Reboot and your done / back on AT&T network.
Click to expand...
Click to collapse
Well. I didn't read this post, before.
I had a G3 D855 V10a rooted with Purpledrake and installed TWRP recovery.
This eveninig I autoupdated my phone to V10g...
After download and reboot, my phone goes into bootloop: it starts only on recovery.
What I have to do, now???
Thanks.

aparty said:
Well. I didn't read this post, before.
I had a G3 D855 V10a rooted with Purpledrake and installed TWRP recovery.
This eveninig I autoupdated my phone to V10g...
After download and reboot, my phone goes into bootloop: it starts only on recovery.
What I have to do, now???
Thanks.
Click to expand...
Click to collapse
Flash back to stock and start over.

Can you explain me what I have to do exactly?
Or can you suggest a guide?
I'm into panic... and I don't found any info, probably due to panic!!!
Help me! Thanks.

aparty said:
Can you explain me what I have to do exactly?
Or can you suggest a guide?
I'm into panic... and I don't found any info, probably due to panic!!!
Help me! Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
Step by Step guide with several options

Toneman07 said:
http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667
Step by Step guide with several options
Click to expand...
Click to collapse
Well, from TWRP recovery I wipe cache, then I use info in this post
http://forum.xda-developers.com/showpost.php?p=55367233&postcount=1
The phone reboot, it seems to apply update, but it restarts with V10a....
I haven't update, but I have my phone!!!
Thank you so much!

[Q&A] [ROM] SPRINT STOCK ZVG [ROOTED] (Full/Light/Ultra)

Q&A for [ROM] SPRINT STOCK ZVG [ROOTED] (Full/Light/Ultra)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] SPRINT STOCK ZVG [ROOTED] (Full/Light/Ultra). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

zvg kernel
is zvg kernel work on other stock lp like simple rom v3?

Simple ROM v3? I'll look to find that ROM and then see if I can id anything.

Lg ls890 zvg
you are saying LOG in and update profile....please expalin how to update profile after reboot...
waiting for reply

Farhan Ashraf said:
you are saying LOG in and update profile....please expalin how to update profile after reboot...
waiting for reply
Click to expand...
Click to collapse
Stock ROM, in settings 3rd from bottom is system updates. Update prl and profile are first two.

Lg ls890 zvg
i have installed full zvg rom u provide...and radio and kernal as well,........but after reboot (LG logo)....screen got black...i waited 20 to 25 mins.....but not booted successfully in to new installed rom....i was using zvc stock rom before this.......please help

Farhan Ashraf said:
i have installed full zvg rom u provide...and radio and kernal as well,........but after reboot (LG logo)....screen got black...i waited 20 to 25 mins.....but not booted successfully in to new installed rom....i was using zvc stock rom before this.......please help
Click to expand...
Click to collapse
Did you use lollipop auto-rec to install TWRP. Which will put the proper boot loader, and download with kernel. Then you go to TWRP and install radio and ROM after a wipe.
I believe someone said it came back with a firmware issue. But I will have to tot, back and verify.

Lg ls890 zvg
i have not installed auto rec bcoz . i hv heared after installing autorec some lines issue on on screen....please suggest if its safe
---------- Post added at 04:39 AM ---------- Previous post was at 04:24 AM ----------
and i have downloaded auto rec from the tht u given....but this apk is not installing on my ls980 ...with this msg "there was a problem with praising this application "
if possible then give me link of autorec from play store

Lg ls890 zvg
also tell me how can i check tht i have kitkat bootloader installed or lollipop bootloader on my ls980.....plz note i have flased cm12 on my ls980 with twrp 2 weeks ago........

Farhan Ashraf said:
also tell me how can i check tht i have kitkat bootloader installed or lollipop bootloader on my ls980.....plz note i have flased cm12 on my ls980 with twrp 2 weeks ago........
Click to expand...
Click to collapse
Cm12 is based on jellybean boot loader.
Lollipop boot loader is on stock.
KitKat is for those on custom stock based pure lollipop code.
I'm hoping I can verify something as to if only lollipop Roms can use the new auto-rec due to something in coding or something else.

Lg ls890 zvg
autore. apk tht u given is not running on my phone...
i jave ls980 with twrp recovery installed....and i m ron rooted stock zvc...
also help in this scnerio can i install zvg through terp recovery

Since I already have to be on ZVG and rooted in order to install this... what is the purpose of installing the Full version of this? wouldn't it just get me what I already have?

Good question, I believe it was in the thought that we could jump from zvc,zvd, or zve into it. But firmware, seems to be an issue. Upgraded firmware breaks coming from a different version.

i can't root my stock zvg
i installed stock zvg with adb sideload. but i can't root it! this root method is stucking at %90. is there any root method except this?

Sirchade` said:
i installed stock zvg with adb sideload. but i can't root it! this root method is stucking at %90. is there any root method except this?
Click to expand...
Click to collapse
Mine would stick at 90%, I waited quite a while and figured it for stuck. So I rebooted and checked, i was rooted.

secret.animal said:
Mine would stick at 90%, I waited quite a while and figured it for stuck. So I rebooted and checked, i was rooted.
Click to expand...
Click to collapse
not same on my device. i wait 10 minutes on %90 and nothing happen. i reboot my ls980 and it's still not rooted.
i tot back to zve, rooted and sideloaded zvg. retried this method but didn't work again.
i want root only for sim unlock.

Sirchade` said:
not same on my device. i wait 10 minutes on %90 and nothing happen. i reboot my ls980 and it's still not rooted.
i tot back to zve, rooted and sideloaded zvg. retried this method but didn't work again.
i want root only for sim unlock.
Click to expand...
Click to collapse
Have you tried the non graphic version 1.2.

Stuck at initial boot
For some reason I can't seem to boot for the first time after flashing. I am stuck on the LG logo waited around half a hour and got nothing.
Tried Re-Flashing it from recovery, doesn't seem to work.
Before flashing this, I TOT'ed back to ZVE, took OTA, Rooted with LG One Click Root, got TWRP installed with AutoRec (the Lollipop one) and sim unlocked with http://forum.xda-developers.com/spr...click-tool-sim-unlock-network-manual-t3114446
Luckily I backed up my stock ZVG ROM. Any clues on what to do?

I have a boost mobile lg g2. Can I root it? I just wanted it rooted but still be able to update via factory
Sent from my LG-LS980 using Tapatalk

custom rom
magicman70 said:
I have a boost mobile lg g2. Can I root it? I just wanted it rooted but still be able to update via factory
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Hi, guys can you tell'me if i can flash this rom over my custom rom lollipop actually a have VK 5.0.2 but i want flash this rom, can do that?

SPH-L710 Custom Roms on L710VPUDOH1 baseband version

I got a Galaxy S3 SPH-L710 and it was all ready updated to the L710VPUDOH1 baseband version. After searching around a little bit I noticed that most of the Roms are for baseband L710VPUDND8 and that some of the ND8 roms would not flash correctly.
I guess maybe i found a workaround for this. When i first tried to flash the CM 12.1 Rom I got error and it did not load. Did not hurt anything either. Was a little tricky getting initial root but got it all working.
Figured id share how i accomplished this in case someone else with the L710VPUDOH1 baseband wants to run the other Roms.
First i tried to root with Odin and the supersu.zip but it didnt take correctly.
Odin showed successful and the supersu flashed to the /system but every time i tried to run supersu I get Unfortunately SuperSU stopped working.
So i ended up using ODIN to get Temp CWM recovery and installed the CF-Autoroot in the CWM recovery. This woorked to get Root.
I downloaded the TWRP manager from playstore andused it to install TWRP 2.8.1.0
The TWRP Manager gave me an error but when i booted into recovery I had TWRP.
After that i tried to flash CM 12.1 in TWRP but got error and it didnt work.
I read that wicked 2.2 would load,
its big all most a gig so i figured it was pretty complete. maybe based off of stock.
I loaded it successfully.
afterwards i booted back into twrp and did an advanced wipe of.
Dalvic Cache
/ system
/data
/internal storage
/cache
Then i loaded Cm 12.1 with no issues.
Tested Pac-Rom No issues.
Im thinking any of the newer roms will flash fine now.

BigCountry907 said:
After that i tried to flash CM 12.1 in TWRP but got error and it didnt work.
Click to expand...
Click to collapse
I'm hoping you left out some steps, because if you tried flashing CM 12.1 without doing a wipe on System/Data/Cache/Dalvik then you will not have a working phone.

BigCountry907 said:
I got a Galaxy S3 SPH-L710 and it was all ready updated to the L710VPUDOH1 baseband version. After searching around a little bit I noticed that most of the Roms are for baseband L710VPUDND8 and that some of the ND8 roms would not flash correctly.
I guess maybe i found a workaround for this. When i first tried to flash the CM 12.1 Rom I got error and it did not load. Did not hurt anything either. Was a little tricky getting initial root but got it all working.
Figured id share how i accomplished this in case someone else with the L710VPUDOH1 baseband wants to run the other Roms.
First i tried to root with Odin and the supersu.zip but it didnt take correctly.
Odin showed successful and the supersu flashed to the /system but every time i tried to run supersu I get Unfortunately SuperSU stopped working.
So i ended up using ODIN to get Temp CWM recovery and installed the CF-Autoroot in the CWM recovery. This woorked to get Root.
I downloaded the TWRP manager from playstore andused it to install TWRP 2.8.1.0
The TWRP Manager gave me an error but when i booted into recovery I had TWRP.
After that i tried to flash CM 12.1 in TWRP but got error and it didnt work.
I read that wicked 2.2 would load,
its big all most a gig so i figured it was pretty complete. maybe based off of stock.
I loaded it successfully.
afterwards i booted back into twrp and did an advanced wipe of.
Dalvic Cache
/ system
/data
/internal storage
/cache
Then i loaded Cm 12.1 with no issues.
Tested Pac-Rom No issues.
Im thinking any of the newer roms will flash fine now.
Click to expand...
Click to collapse
I don't think the roms care if your on ND8 or NJ2 or whatever the latest is . You should also update twrp to 2.8.7.0 . Version 2.8.4.0 and on allow you to flash a new twrp version image right from recovery . 2.8.1.0 is pretty old . Best of luck with your new hobby .

Ya i didnt have any troubles.
Im currently working on 5 devices and writing sort of a kitchen.
But it dose way more than most kitchens. Even creates a CWM style backup over adb like onandroid.
I found a way to patch a factory recovery.img to flash files signed with my own keys and that kinda started it all.
Anyway Merry Christmas

what's the root method for DOH1? ;; I can't seem to find a thread specifically walking through the root method for the latest baseband and i have an old S3 and was thinking of playing around with it for a while for fun turn it into a light weight media player to save battery on my LG G4 since we all know how inconsistent and crap the battery can be with the G4 lol

The root is pretty easy.
I used this.
http://forum.xda-developers.com/showthread.php?t=1963812
Then just get Clockworkmod or TWRP recovery for the d2spr sphl710 and flash it.
After that load any rom you want

silvernirvash said:
what's the root method for DOH1? ;; I can't seem to find a thread specifically walking through the root method for the latest baseband and i have an old S3 and was thinking of playing around with it for a while for fun turn it into a light weight media player to save battery on my LG G4 since we all know how inconsistent and crap the battery can be with the G4 lol
Click to expand...
Click to collapse
Same as always, use odin to flash a .tar of twrp. Then use twrp to flash a .zip of SuperSU. Done

Doh1
Is there any rom working at Doh1 version?

bael616 said:
Is there any rom working at Doh1 version?
Click to expand...
Click to collapse
All of them

madbat99 said:
All of them
Click to expand...
Click to collapse
Really? I have been told there was nothing for the l710vpudoh1 version. Would you mind to help me out with this topic of flashing a rom, please? P.D: Sorry about my english.

bael616 said:
Really? I have been told there was nothing for the l710vpudoh1 version. Would you mind to help me out with this topic of flashing a rom, please? P.D: Sorry about my english.
Click to expand...
Click to collapse
Oh1 is not a version of the phone. It's just a build number.
Do you have the triband model? What carrier?

madbat99 said:
Oh1 is not a version of the phone. It's just a build number.
Do you have the triband model? What carrier?
Click to expand...
Click to collapse
Got no idea. It is the sprint CDMA version.

bael616 said:
Got no idea. It is the sprint CDMA version.
Click to expand...
Click to collapse
Well that's what you need to know. Oh1 doesn't matter. There is oh1 for regular s3 and triband s3. Regular is sph-L710 and triband is sph-L710t. Does it have a t at the end of the model number?

madbat99 said:
Well that's what you need to know. Oh1 doesn't matter. There is oh1 for regular s3 and triband s3. Regular is sph-L710 and triband is sph-L710t. Does it have a t at the end of the model number?
Click to expand...
Click to collapse
It doesn't have any t. So I guess it Ies the regular one. I want to know how to root it and flash a rom.

bael616 said:
It doesn't have any t. So I guess it Ies the regular one. I want to know how to root it and flash a rom.
Click to expand...
Click to collapse
To root, you need odin on your PC. You can get it here.
Use odin to flash twrp recovery. You can get twrp from their site. twrp
Get the .tar of the newest build for d2spr (sprint s3). Put it on you PC somewhere you can find it (download folder is fine)
There are tutorials everywhere for using odin. It's the way to root almost all Samsung phones.
You also need the Samsung drivers on your PC. I don't have a link for that at this moment.
Then launch odin on your PC.
Put phone in download mode (from powered off, hold power+home+volume down)
Plug phone in to PC and odin should say "added"
Click AP button in odin then navigate to where you have the Twrp .tar downloaded and select it
Click start in odin.
When it finishes it should say pass.
Don't let the phone boot to system, unplug it and take out battery
Put batter back in and boot directly to twrp recovery by holding power+home+VOLUME UP
In twrp select reboot, then system. It should say you don't have root and ask if you want root. Swipe the arrow for yes. Once it boots, open SuperSU and update binaries if it asks. Choose normal method.
Done. Rooted.
You should really have looked up how to root before coming to a thread about flashing roms. There are tutorials everywhere for rooting this phone. Google is your friend dude.
Edit: you can get the Samsung USB drivers here
That thread has rooting instructions too. It's for the virgin Mobile s3, but its the same phone. Those instructions work fine. Only difference is I linked you to twrp recovery instead of philztouch (philz development is dead) and I linked you to a newer odin.
If you are that new that you aren't sure about rooting, maybe start over there in Android forums. I'm a guide there.

bael616 said:
Really? I have been told there was nothing for the l710vpudoh1 version. Would you mind to help me out with this topic of flashing a rom, please? P.D: Sorry about my english.
Click to expand...
Click to collapse
I was given a SPH-L710... Originally purchased from sprint.... Currently activated on boost. I got the phone Dec. 24 2015. It had stock unrooted DOH1 with untripped warranty bit. I have successfully booted and ran these roms for a minimum of 24 hrs each. As far as I could tell they were fully functional including: 4G LTE, MMS send and recieve, hotspot, wifi, bluetooth, camera (still and video). All main fuctions worked correctly for the limited time that I used each rom. :
-Wicked-X-Bare-Bones.zip
-Wicked-X-v8.2.zip
-cm-11-20150831_SNAPSHOT-XNG3CAO3FN-d2lte.zip
-cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2spr.zip
-cm-12.1-20160202-NIGHTLY-d2spr.zip
-cm-13.0-20160130-UNOFFICIAL-d2spr.zip
Im currently running CM13 unofficial as a daily driver. Cm12.1 SNAPSHOT was also very responsive and gave me no problems. I flashed them with twrp.2.8.7.2-d2spr.img. i flashed the recovery with odin after i made it into a .tar.md5 using linux mint 17.3 cinnamon. For the lte and mms i used "apn backup and restore" from google play with the root explorer method. Open gapps aroma for each android version i got from cyanogenmod website. i would recommend searching and using the dd command with adb shell in a linux terminal or cygwin to backup every partition on your doh1 first. (You will need root and busybox) There should be 24 partitions in mmcblk0. Make a backup of every one and you can recover one way or another ALMOST regardless of what may or may not go wrong. I used supersu 2.65 zip. Ive had alot of issues due to DOH1 but all the resources are in that easily used omnibox. Hope any of this info helps you.

madbat99 said:
To root, you need odin on your PC. You can get it here.
Use odin to flash twrp recovery. You can get twrp from their site. twrp
Get the .tar of the newest build for d2spr (sprint s3). Put it on you PC somewhere you can find it (download folder is fine)
There are tutorials everywhere for using odin. It's the way to root almost all Samsung phones.
You also need the Samsung drivers on your PC. I don't have a link for that at this moment.
Then launch odin on your PC.
Put phone in download mode (from powered off, hold power+home+volume down)
Plug phone in to PC and odin should say "added"
Click AP button in odin then navigate to where you have the Twrp .tar downloaded and select it
Click start in odin.
When it finishes it should say pass.
Don't let the phone boot to system, unplug it and take out battery
Put batter back in and boot directly to twrp recovery by holding power+home+VOLUME UP
In twrp select reboot, then system. It should say you don't have root and ask if you want root. Swipe the arrow for yes. Once it boots, open SuperSU and update binaries if it asks. Choose normal method.
Done. Rooted.
You should really have looked up how to root before coming to a thread about flashing roms. There are tutorials everywhere for rooting this phone. Google is your friend dude.
Edit: you can get the Samsung USB drivers here
That thread has rooting instructions too. It's for the virgin Mobile s3, but its the same phone. Those instructions work fine. Only difference is I linked you to twrp recovery instead of philztouch (philz development is dead) and I linked you to a newer odin.
If you are that new that you aren't sure about rooting, maybe start over there in Android forums. I'm a guide there.
Click to expand...
Click to collapse
Thanks a lot. I have already rooted the phone but now I want to know what Roms are made to this device.
---------- Post added at 05:28 AM ---------- Previous post was at 05:24 AM ----------
HouseHG said:
I was given a SPH-L710... Originally purchased from sprint.... Currently activated on boost. I got the phone Dec. 24 2015. It had stock unrooted DOH1 with untripped warranty bit. I have successfully booted and ran these roms for a minimum of 24 hrs each. As far as I could tell they were fully functional including: 4G LTE, MMS send and recieve, hotspot, wifi, bluetooth, camera (still and video). All main fuctions worked correctly for the limited time that I used each rom. :
-Wicked-X-Bare-Bones.zip
-Wicked-X-v8.2.zip
-cm-11-20150831_SNAPSHOT-XNG3CAO3FN-d2lte.zip
-cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2spr.zip
-cm-12.1-20160202-NIGHTLY-d2spr.zip
-cm-13.0-20160130-UNOFFICIAL-d2spr.zip
Im currently running CM13 unofficial as a daily driver. Cm12.1 SNAPSHOT was also very responsive and gave me no problems. I flashed them with twrp.2.8.7.2-d2spr.img. i flashed the recovery with odin after i made it into a .tar.md5 using linux mint 17.3 cinnamon. For the lte and mms i used "apn backup and restore" from google play with the root explorer method. Open gapps aroma for each android version i got from cyanogenmod website. i would recommend searching and using the dd command with adb shell in a linux terminal or cygwin to backup every partition on your doh1 first. (You will need root and busybox) There should be 24 partitions in mmcblk0. Make a backup of every one and you can recover one way or another ALMOST regardless of what may or may not go wrong. I used supersu 2.65 zip. Ive had alot of issues due to DOH1 but all the resources are in that easily used omnibox. Hope any of this info helps you.
Click to expand...
Click to collapse
Thanks man is there any link you can share with me? I really want to flash a rom but there is no one with this device in Facebook groups. So if you can share any Rom and the way it should be flashed I will be really thankful.
P. D: as I mentioned before I have no perfect English skills so I hope you understand what I mean.

bael616 said:
Thanks a lot. I have already rooted the phone but now I want to know what Roms are made to this device.
---------- Post added at 05:28 AM ---------- Previous post was at 05:24 AM ----------
Thanks man is there any link you can share with me? I really want to flash a rom but there is no one with this device in Facebook groups. So if you can share any Rom and the way it should be flashed I will be really thankful.
P. D: as I mentioned before I have no perfect English skills so I hope you understand what I mean.
Click to expand...
Click to collapse
I cant post links due to my total number of posts. PM me and I'll send them to you.

bael616 said:
Thanks a lot. I have already rooted the phone but now I want to know what Roms are made to this device.
---------- Post added at 05:28 AM ---------- Previous post was at 05:24 AM ----------
Thanks man is there any link you can share with me? I really want to flash a rom but there is no one with this device in Facebook groups. So if you can share any Rom and the way it should be flashed I will be really thankful.
P. D: as I mentioned before I have no perfect English skills so I hope you understand what I mean.
Click to expand...
Click to collapse
You have the sprint s3, but are you on sprint? If you are not on Sprint there are additional instructions. Any rom that says its for D2spr is fine. That's the sprint s3.
this is the one I'm using.

HouseHG said:
I cant post links due to my total number of posts. PM me and I'll send them to you.
Click to expand...
Click to collapse
Ok man thanks
---------- Post added at 01:39 AM ---------- Previous post was at 01:35 AM ----------
madbat99 said:
You have the sprint s3, but are you on sprint? If you are not on Sprint there are additional instructions. Any rom that says its for D2spr is fine. That's the sprint s3.
this is the one I'm using.
Click to expand...
Click to collapse
Actually, I don't use any company cause I don't live in the US so I use the phone only with WiFi.