[Q] Unable to Install ViperX JB ROM - HTC One X

Hi All,
Right now I am with the below ROM.
http://forum.xda-developers.com/htc...nofficial-htc-one-x-cyanogenmod-12-0-t2976389
I want to go back to ViperX where when I gave a try, this ROM is not getting installed.
Please help me out.
Regards,
Vineel.

popcee.p said:
Hi All,
Right now I am with the below ROM.
http://forum.xda-developers.com/htc...nofficial-htc-one-x-cyanogenmod-12-0-t2976389
I want to go back to ViperX where when I gave a try, this ROM is not getting installed.
Please help me out.
Regards,
Vineel.
Click to expand...
Click to collapse
new layout or old lyout. If you are on the NL just flash Viper for the NL if you are on the OL flash the old one

Thant said:
new layout or old lyout. If you are on the NL just flash Viper for the NL if you are on the OL flash the old one
Click to expand...
Click to collapse
I did this earlier. This time what I did is -
1. Installed Recovery tool.
2. Flashed ViperX but this is not getting flashed.
Dont know the problem.
How to achieve this.
Right now I am on New Layout. Shall I use this new Layout to flash ViperX?

popcee.p said:
I did this earlier. This time what I did is -
1. Installed Recovery tool.
2. Flashed ViperX but this is not getting flashed.
Dont know the problem.
How to achieve this.
Right now I am on New Layout. Shall I use this new Layout to flash ViperX?
Click to expand...
Click to collapse
yes use New Layout viperx rom and follow these steps
1. wipe cache , dalvik cache and clear data
2.flash the viperxNL.zip using twrp
3.and then go to fastboot mode and flash the boot.img using fastboot flash boot boot.img
4.and then restart the phone

onex master said:
yes use New Layout viperx rom and follow these steps
1. wipe cache , dalvik cache and clear data
2.flash the viperxNL.zip using twrp
3.and then go to fastboot mode and flash the boot.img using fastboot flash boot boot.img
4.and then restart the phone
Click to expand...
Click to collapse
Thanks for the message mate.
Would you please help me out with the Links to download ViperXNL.zip and twrp for this....
Regards,
Vineel.

popcee.p said:
Thanks for the message mate.
Would you please help me out with the Links to download ViperXNL.zip and twrp for this....
Regards,
Vineel.
Click to expand...
Click to collapse
I got this Link.
http://forum.xda-developers.com/showpost.php?p=59994171&postcount=306
Do you want me to follow the above mentioned steps to do this after downloading all necessary files?
Regards,
Vineel.

popcee.p said:
I got this Link.
http://forum.xda-developers.com/showpost.php?p=59994171&postcount=306
Do you want me to follow the above mentioned steps to do this after downloading all necessary files?
Regards,
Vineel.
Click to expand...
Click to collapse
Yep
And hit the thanks button if help

onex master said:
Yep
And hit the thanks button if help
Click to expand...
Click to collapse
I downloaded Viperx-NL and twrp v2.8.5.3. Big.
Flashed TWRP.
Found 2 drivers of HOX and filled it with zip files of ROM and Gapps.
Then I tried flashing ROM. It asked me some steps to followed and I did and suddenly phone got Switched Off and got ON and Hanged on HTC logo.
Again I performed this and ROM installation was successful and it asked me to reboot. I said yes. Mobile again hanged on HTC Logo. So I tried to flash Boot image file given by you separately. It didnt worked out.
Again I tried flashing ROM. It asked me some steps to followed and I did and suddenly phone got Switched Off and got ON and Hanged on HTC logo.
The Zip files got disappeared totally and my system is not able to detect the mobile 2 drivers.
Please help me.

popcee.p said:
I downloaded Viperx-NL and twrp v2.8.5.3. Big.
Flashed TWRP.
Found 2 drivers of HOX and filled it with zip files of ROM and Gapps.
Then I tried flashing ROM. It asked me some steps to followed and I did and suddenly phone got Switched Off and got ON and Hanged on HTC logo.
Again I performed this and ROM installation was successful and it asked me to reboot. I said yes. Mobile again hanged on HTC Logo. So I tried to flash Boot image file given by you separately. It didnt worked out.
Again I tried flashing ROM. It asked me some steps to followed and I did and suddenly phone got Switched Off and got ON and Hanged on HTC logo.
The Zip files got disappeared totally and my system is not able to detect the mobile 2 drivers.
Please help me.
Click to expand...
Click to collapse
follow the steps you followed to change to new layout i.e flashing twrp again and a factory reset..blah..blah
then download ARHD NL .zip and flash it or skydragon.zip .. and dont forget to flash the boot.img in fastboot
Maybe there is some problem in the viperNL.zip ...

onex master said:
follow the steps you followed to change to new layout i.e flashing twrp again and a factory reset..blah..blah
then download ARHD NL .zip and flash it or skydragon.zip .. and dont forget to flash the boot.img in fastboot
Maybe there is some problem in the viperNL.zip ...
Click to expand...
Click to collapse
I love ViperX.
I want to use Old layout. I have TWRP 2.4.4.0 recovery. I flashed this but this is not functioning properly.
So I could not flash ViperX.
Suggest me the best way mate.

popcee.p said:
I love ViperX.
I want to use Old layout. I have TWRP 2.4.4.0 recovery. I flashed this but this is not functioning properly.
So I could not flash ViperX.
Suggest me the best way mate.
Click to expand...
Click to collapse
i would suggest you to stay on the new layout and flash arhd or other sense rom .
coz there are many benefits of new layout
as for viper rom the problem may be because of the aroma installer
could you tell me what all options you selected in aroma installer??

onex master said:
i would suggest you to stay on the new layout and flash arhd or other sense rom .
coz there are many benefits of new layout
as for viper rom the problem may be because of the aroma installer
could you tell me what all options you selected in aroma installer??
Click to expand...
Click to collapse
Aroma Installer???
I am not that techie mate. I don't even understood this question.

popcee.p said:
Aroma Installer???
I am not that techie mate. I don't even understood this question.
Click to expand...
Click to collapse
i am too not a techine i am just 17
when you flash viperNL.zip there will be a popup of aroma installer where it will ask you do a full wipe or continue without wiping
then it will ask you to de-sense the rom or not then which mods you want to install beats ..etc...the in the next screen it will ask if you want to remove any apk ...then at last it will flash the rom with the % increase in flashing the rom and after that do you want the logcat ..then the phone comes out of aroma installer back in the twrp menu ...
and for the viperNL i just found the trick ..here is the link to how to flash without any error
http://forum.xda-developers.com/htc.../storage-layout-hox-endeavoru-t3022358/page38 (post no 374)

onex master said:
i am too not a techine i am just 17
when you flash viperNL.zip there will be a popup of aroma installer where it will ask you do a full wipe or continue without wiping
then it will ask you to de-sense the rom or not then which mods you want to install beats ..etc...the in the next screen it will ask if you want to remove any apk ...then at last it will flash the rom with the % increase in flashing the rom and after that do you want the logcat ..then the phone comes out of aroma installer back in the twrp menu ...
and for the viperNL i just found the trick ..here is the link to how to flash without any error
http://forum.xda-developers.com/htc.../storage-layout-hox-endeavoru-t3022358/page38 (post no 374)
Click to expand...
Click to collapse
Yes. This I have seen. I did not selected anything. I just moved forward clicking Next. Suddenly phone got switched Off.
What do u suggest mate??
Thanks for the Info. Now I understood what Aroma Installer is.

popcee.p said:
Yes. This I have seen. I did not selected anything. I just moved forward clicking Next. Suddenly phone got switched Off.
What do u suggest mate??
Thanks for the Info. Now I understood what Aroma Installer is.
Click to expand...
Click to collapse
carefully read the link i have posted ..i know you will succeed flashing VIPERNL.ZIP
Happy flashing
Hit the thanks button if helped

onex master said:
carefully read the link i have posted ..i know you will succeed flashing VIPERNL.ZIP
Happy flashing
Hit the thanks button if helped
Click to expand...
Click to collapse
I am still trying but my system is not opening the two drives of HOX.

popcee.p said:
I am still trying but my system is not opening the two drives of HOX.
Click to expand...
Click to collapse
then you will have to go back to old layout and then again flash the new layout twrp
just follow the guide given by teemo to go back to old layout and then follow the new layout guide

onex master said:
then you will have to go back to old layout and then again flash the new layout twrp
just follow the guide given by teemo to go back to old layout and then follow the new layout guide
Click to expand...
Click to collapse
Will give a try right away...

popcee.p said:
Will give a try right away...
Click to expand...
Click to collapse
Trying to Install TWRP 2.8.1.0
Failed

The Problem is with ViperX- NL Zip file.
Does anyone help me with perfect ViperX-NL ROM file please...

Related

TWRP screen not working

Hello,
So i was rooting my HTC ONE X, following the steps by guide in general thread. And when i flashed TWRP and booted into it, screen is not responding and i can not navigate through it. What i did wrong?
Nothing probably. The newer official bases have updated touchdrivers .....
Flash this one and try again
http://db.tt/H7m4ffIP
there are problems with the 3.20 fw...I am using cwm now, until fixed version will come out
Mr Hofs said:
Nothing probably. The newer official bases have updated touchdrivers .....
Flash this one and try again
http://db.tt/H7m4ffIP
Click to expand...
Click to collapse
How should i do that? I was following this http://forum.xda-developers.com/showthread.php?t=2069904 thread so really no idea how to flash things without CWMP or TWRP.
throcker said:
there are problems with the 3.20 fw...I am using cwm now, until fixed version will come out
Click to expand...
Click to collapse
Nah no problem with the 3.20 firmware.....it already exist from the first 3.16 update
So should i flash CWM on top?
Yeah just flash it. It will override the old one
Mr Hofs said:
Yeah just flash it. It will override the old one
Click to expand...
Click to collapse
Thank you, it worked just fine.
I know
CASE CLOSED !
Mr Hofs said:
I know
CASE CLOSED !
Click to expand...
Click to collapse
So another problem i have. After i wiped cache dalvik and other, Flashed a ROM and flashed a kernel from boot.img, rom boots up. Everything seems ok except touchscreen not working. Can not insert pin code. Any ideas?
redh4t said:
So another problem i have. After i wiped cache dalvik and other, Flashed a ROM and flashed a kernel from boot.img, rom boots up. Everything seems ok except touchscreen not working. Can not insert pin code. Any ideas?
Click to expand...
Click to collapse
Which ROM are you using?
Did you fully wipe everything in recovery?
1. Flash boot.img from the rom.zip after that...
2. fastboot erase cache
3. Flash this script via recovery(Install from sd>choose the zip) : http://d-h.st/kG0 (it wipes /data/cache/dalvic/system
4. Flash the rom
5. Reboot!
vin4yak said:
Which ROM are you using?
Did you fully wipe everything in recovery?
1. Flash boot.img from the rom.zip after that...
2. fastboot erase cache
3. Flash this script via recovery(Install from sd>choose the zip) : http://d-h.st/kG0 (it wipes /data/cache/dalvic/system
4. Flash the rom
5. Reboot!
Click to expand...
Click to collapse
How to do that second step? fastboot erase cache?
This is what i did:
1. Rooted my phone.
2. Made a backup
3. Wipe Cache, Dalvik, Factory Reset and System with CWMR
4. Installed ROM MIUI Official
5. Rebooted into bootloader
6. Opened toolkit by Hasoon2000 (allinone) and flashed kernel (boot.img) from ROM.zip
7. Rebooted - touchscreen bug.
redh4t said:
How to do that second step? fastboot erase cache?
This is what i did:
1. Rooted my phone.
2. Made a backup
3. Wipe Cache, Dalvik, Factory Reset and System with CWMR
4. Installed ROM MIUI Official
5. Rebooted into bootloader
6. Opened toolkit by Hasoon2000 (allinone) and flashed kernel (boot.img) from ROM.zip
7. Rebooted - touchscreen bug.
Click to expand...
Click to collapse
Use RD-MIUI from xda! Don't use the one from the other site... many people have found this touch screen bug! It's because of the different bases I presume...
I don't use toolkits to flash boot.img or anything... I do it manually via fastboot.. The toolkit also does the same thing but it just doesn't show you (does it in background)...
vin4yak said:
Use RD-MIUI from xda! Don't use the one from the other site... many people have found this touch screen bug! It's because of the different bases I presume...
I don't use toolkits to flash boot.img or anything... I do it manually via fastboot.. The toolkit also does the same thing but it just doesn't show you (does it in background)...
Click to expand...
Click to collapse
So i flashed XM kernel and modules in it. Screen seems to be working.
redh4t said:
So i flashed XM kernel and modules in it. Screen seems to be working.
Click to expand...
Click to collapse
Great! Enjou MIUI! :good:
vin4yak said:
Great! Enjou MIUI! :good:
Click to expand...
Click to collapse
Thank you. +1 for you guys.
Mr Hofs said:
Nothing probably. The newer official bases have updated touchdrivers .....
Flash this one and try again
http://db.tt/H7m4ffIP
Click to expand...
Click to collapse
Hello I have the same issue but there no file anymore when I click on link above.
Could you tell me what the file you gave to help that person was ?
layoup said:
Hello I have the same issue but there no file anymore when I click on link above.
Could you tell me what the file you gave to help that person was ?
Click to expand...
Click to collapse
http://db.tt/SPXdFfPw
This one.....
Mr Hofs said:
http://db.tt/SPXdFfPw
This one.....
Click to expand...
Click to collapse
Thanks a lot
It works
Mr Hofs said:
http://db.tt/SPXdFfPw
This one.....
Click to expand...
Click to collapse
EDITED: I found my nand in CWM backup.

[Q] Installing Infamous Tab3 1.1 Error (Sig Verification Failed)

I downloaded Infamous Tab3 for my tablet, I put the rom package on my SD card, and tried to install it from recovery mode, and it said that the Signature Verification Failed.
I've also tried unzipping the archive contents onto my SD card, but there's nothing in there that the recovery mode can use.
Am I missing something here?
aceman67 said:
I downloaded Infamous Tab3 for my tablet, I put the rom package on my SD card, and tried to install it from recovery mode, and it said that the Signature Verification Failed.
I've also tried unzipping the archive contents onto my SD card, but there's nothing in there that the recovery mode can use.
Am I missing something here?
Click to expand...
Click to collapse
You have the cwm or twrp on the tab? You need to install it from that. Not stock recovery.
mirrin said:
You have the cwm or twrp on the tab? You need to install it from that. Not stock recovery.
Click to expand...
Click to collapse
Hello,
How to do that on non rooted devices?
Thank you.
adriansimo said:
Hello,
How to do that on non rooted devices?
Thank you.
Click to expand...
Click to collapse
Download and install the custom recovery that you wish to use (from the CWM or TWRP thread in the the development section).
Follow the instructions posted in the recovery threads.
There is a root.zip posted there as well to give you root (but the custom rom probably is rooted already).
gr8nole said:
Download and install the custom recovery that you wish to use (from the CWM or TWRP thread in the the development section).
Follow the instructions posted in the recovery threads.
There is a root.zip posted there as well to give you root (but the custom rom probably is rooted already).
Click to expand...
Click to collapse
"HOW TO INSTALL:
•Download ROM and place on SD
•Reboot into recovery
•Wipe unless change log say otherwise *
•Install the ROM
•Reboot out of recovery
•Skip setup wizard (you can put your name in)
•wait five minutes for all to settle as this is a highly tweaked ROM and Kernel (soon)
•Reboot"
These are the instructions. I don't know how to reboot in recovery a non-rooted device.
Thank you for your help.
adriansimo said:
"HOW TO INSTALL:
•Download ROM and place on SD
•Reboot into recovery
•Wipe unless change log say otherwise *
•Install the ROM
•Reboot out of recovery
•Skip setup wizard (you can put your name in)
•wait five minutes for all to settle as this is a highly tweaked ROM and Kernel (soon)
•Reboot"
These are the instructions. I don't know how to reboot in recovery a non-rooted device.
Thank you for your help.
Click to expand...
Click to collapse
Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen.
mirrin said:
*snip*
Click to expand...
Click to collapse
gr8nole said:
*snip*
Click to expand...
Click to collapse
Thank you so much for your help
ROM installed and running
aceman67 said:
Thank you so much for your help
ROM installed and running
Click to expand...
Click to collapse
Hello,
I have a SM-211 model and I have the same problem. From stock recovery I am not able to flash 1.1 because "Signe Verification Error". How did you managed to install this ROM?
Thank you.
308 ainssv
adriansimo said:
Hello,
I have a SM-211 model and I have the same problem. From stock recovery I am not able to flash 1.1 because "Signe Verification Error". How did you managed to install this ROM?
Thank you.
Click to expand...
Click to collapse
Read the entire thread, and search what the two people who I quoted said
aceman67 said:
Thank you so much for your help
ROM installed and running
Click to expand...
Click to collapse
aceman67 said:
Read the entire thread, and search what the two people who I quoted said
Click to expand...
Click to collapse
Sorry, but I don't know how to install CWM or TW recovery on non-rooted devices Tab 3 7.0 SM-211.
And I read all the posts a few times. Probably I am missing something.
Please help me.
Thank you.
adriansimo said:
Sorry, but I don't know how to install CWM or TW recovery on non-rooted devices Tab 3 7.0 SM-211.
And I read all the posts a few times. Probably I am missing something.
Please help me.
Thank you.
Click to expand...
Click to collapse
You're lucky my Girlfriend told me to be nice.
http://forum.xda-developers.com/showthread.php?t=2433853
This took me all of 2 min to find once someone pointed me in the right direction (the two people I quoted)
methinks you didn't watch the noob video.
aceman67 said:
You're lucky my Girlfriend told me to be nice.
http://forum.xda-developers.com/showthread.php?t=2433853
This took me all of 2 min to find once someone pointed me in the right direction (the two people I quoted)
methinks you didn't watch the noob video.
Click to expand...
Click to collapse
Thank you very much, but is still unclear for me if these will work for SM-211.
adriansimo said:
Thank you very much, but is still unclear for me if these will work for SM-211.
Click to expand...
Click to collapse
Hey guys, did it occur to you that the instructions you quoted are all for T210 ? It might not work on T211 and might even brick it. The OP and the me too would like an assurance that it will work on the t211. Also for the Infamous Tab3 the dev clearly said that I might lose the 3G if I flash it on my tab 3 T211.

[Q] struck at logo screen while installing rom HELP PLEASE

I HAD A HTC ONE V. ROOTED IT SUCCESSFULLY AND THE TRIED TO INSTALL CUSTOM ROM WITH Primou Omega 2.4.0 - Stable Release 1
BUT STRUCK AT LOGO SCREEN, PLEASE HELP ME. M USING TWRP RECOVERY
jim370 said:
I HAD A HTC ONE V. ROOTED IT SUCCESSFULLY AND THE TRIED TO INSTALL CUSTOM ROM WITH Primou Omega 2.4.0 - Stable Release 1
BUT STRUCK AT LOGO SCREEN, PLEASE HELP ME. M USING TWRP RECOVERY
Click to expand...
Click to collapse
1) Flash proper kernel (Hellboy is for Ptimou Omega as I remember), you have to find it on this forum by yourself
2) Go to recovery, make a full wipe and flash ROM again
jim370 said:
I HAD A HTC ONE V. ROOTED IT SUCCESSFULLY AND THE TRIED TO INSTALL CUSTOM ROM WITH Primou Omega 2.4.0 - Stable Release 1
BUT STRUCK AT LOGO SCREEN, PLEASE HELP ME. M USING TWRP RECOVERY
Click to expand...
Click to collapse
It's so easy, you just have to read a bit...
Like: http://forum.xda-developers.com/showthread.php?t=1996665
or all other tutorials available, if you read threads... :fingers-crossed:
Just don't give-up! Hov is still alive!!! :victory:
bratusm said:
It's so easy, you just have to read a bit...
Like: http://forum.xda-developers.com/showthread.php?t=1996665
or all other tutorials available, if you read threads... :fingers-crossed:
Just don't give-up! Hov is still alive!!! :victory:
Click to expand...
Click to collapse
Yeah, for sure...
parkourz said:
Yeah, for sure...
Click to expand...
Click to collapse
Wonderfull...
parkourz said:
1) Flash proper kernel (Hellboy is for Ptimou Omega as I remember), you have to find it on this forum by yourself
2) Go to recovery, make a full wipe and flash ROM again
Click to expand...
Click to collapse
thanks it worked
now im trying to restore to my original rom using twrp recovery can u please tell me which kernel to use
jim370 said:
now im trying to restore to my original rom using twrp recovery can u please tell me which kernel to use
Click to expand...
Click to collapse
Stock (original). If you had backed up your original ROM selecting backuping boot partition, system partition, data partition and cache partition, you don't have to flash stock kernel. While flashing kernel, it's "installing" on boot partition... I hope you can understand me
parkourz said:
Stock (original). If you had backed up your original ROM selecting backuping boot partition, system partition, data partition and cache partition, you don't have to flash stock kernel. While flashing kernel, it's "installing" on boot partition... I hope you can understand me
Click to expand...
Click to collapse
In English- If you did a normal full backup no need for new kernel it will get reflashed by TWP recovery.
mcgi5sr2 said:
In English- If you did a normal full backup no need for new kernel it will get reflashed by TWP recovery.
Click to expand...
Click to collapse
Exactly
ok, so I have the same problem. I downloaded this rom twice, flash it and my HOV stay on lock screen. I used Kernel from "Features" at Primou Omega 2.4.0 post. Is it correct ? Or maybe I must use another kernel ?
parkourz said:
Stock (original). If you had backed up your original ROM selecting backuping boot partition, system partition, data partition and cache partition, you don't have to flash stock kernel. While flashing kernel, it's "installing" on boot partition... I hope you can understand me
Click to expand...
Click to collapse
i did the recovery and the phone recovered but when i tried to restart the phone it struck at htc logo screen again any idea what happened
jim370 said:
i did the recovery and the phone recovered but when i tried to restart the phone it struck at htc logo screen again any idea what happened
Click to expand...
Click to collapse
In post #3 I wrote that you have to read a bit and I gave you link. You didn't even read read OP there, otherwise you should find something interesting after those words: Stuck in Bootloops, Cant Pass the HTC welcome Screen (in light blue bold font...)
Or, if you'd follow my idea to read other tutorials, you could find that one: http://forum.xda-developers.com/showthread.php?t=1706070 and that one will definitely help. :fingers-crossed:
BOOT LOOP
parkourz said:
1) Flash proper kernel (Hellboy is for Ptimou Omega as I remember), you have to find it on this forum by yourself
2) Go to recovery, make a full wipe and flash ROM again
Click to expand...
Click to collapse
phone doesnot go to recovery mode or fastboot mode. please help
thanks everyone
now my phone is working perfectly

Storage Layout and wifi problem

Hi,
So first I tried to install a new ROM over my Android Revolution ROM, flashing boot.img via Flashify.
Now the wifi, service and bluetooth dont work anymore.
So I tried to install the new layout many times via TWRP install through Flashify but every time I try a NL ROM (like FlexOs or any NL Rom) via recovery, i get : "your recovery is using the new storage layout but the rom you're trying to install is not" even after wiping /data and /sdcard0
I dont have any computer so I have to flash boot.img via Flashify.
Thanks in advance for helping me.
kinder771 said:
Hi,
So first I tried to install a new ROM over my Android Revolution ROM, flashing boot.img via Flashify.
Now the wifi, service and bluetooth dont work anymore.
So I tried to install the new layout many times via TWRP install through Flashify but every time I try a NL ROM (like FlexOs or any NL Rom) via recovery, i get : "your recovery is using the new storage layout but the rom you're trying to install is not" even after wiping /data and /sdcard0
I dont have any computer so I have to flash boot.img via Flashify.
Thanks in advance for helping me.
Click to expand...
Click to collapse
U dont have to flash the boot.img with flashify ...i had tried before to flash a recovery via flashify but it was not successful ...so you will have to try aroma kernel flasher to flash kernel/boot.img without the pc ...hers the link to it
http://forum.xda-developers.com/showthread.php?t=2413561
Great im gonna try this and ill telly ou
Thanks for your answer
Ok so I tried the kernel app and Aroma but I got stuck on a bootloop and ended reinstalling the old ROM using OTG.
So tell me everything i have to do, i have the ROM and the boot.img, what do install/do and how ?
Thanks a lot.
kinder771 said:
Ok so I tried the kernel app and Aroma but I got stuck on a bootloop and ended reinstalling the old ROM using OTG.
So tell me everything i have to do, i have the ROM and the boot.img, what do install/do and how ?
Thanks a lot.
Click to expand...
Click to collapse
1. go ahead and download the kexec kernel v10(old layout) if you are on old layout or the new layout one if you are on new layout
2. Download this Recovery App: AromaFM-KL Flasher(4.6)(ZeusKL v10+ only)
3.download arhd rom
4. go into fastboot anf flash the kexec kernel you download in step 1 via Fastboot flash boot Zeus.img(or the name of the kernel.img )
5.Boot into recovery (TWRP).
6. Now you install Aroma-KL.zip. When you do this aroma file manager opens in recovery.
7. In aroma file manager select the zip of your rom i.e arhd
8. Now after you select your zip in the previous step, aroma gives you a list of options. In this select install the zip.(let all the option which are selected as it is ...dont deselect any option)
9.exit aroma
10.reboot
Sorry but i'm stuck at step 4 asking to flash zeus.img via fastboot because i have no computer.
Is there a way to flash it through recovery or through the app ?
Thx
kinder771 said:
Sorry but i'm stuck at step 4 asking to flash zeus.img via fastboot because i have no computer.
Is there a way to flash it through recovery or through the app ?
Thx
Click to expand...
Click to collapse
No . I dont think so..(dont even try ...as ur hox may get hard bricked)
arrange for a computer for only this time ..and once you have flashed that kernel...you wont need a computer henceforth both for flashing a rom or a kernel you can do it via the aromma kernel
Ok then Ill try to get one.
Still thanks for all your help.
kinder771 said:
Ok then Ill try to get one.
Still thanks for all your help.
Click to expand...
Click to collapse
Dont say "thanks" hit the thanks button
You didn't tell me that : forum.xda-developers.com/showthread.php?t=2586472
I used my android tablet and it worked great !!
Thanks though for your help
kinder771 said:
You didn't tell me that : forum.xda-developers.com/showthread.php?t=2586472
I used my android tablet and it worked great !!
Thanks though for your help
Click to expand...
Click to collapse
Even i didnt knew that...thnx for your help
Did u succeed in flashing the aroma kernel flasher??
Yeah the boot gets flashed but for the rom i get : archive does not contain android-info/product.txt
Any idea on that?
Is it possible to flash Aroma zip via fastboot ? Whats the command to use ?
Thanks
Done I finally succeeded in transferring files to the HOX.
I am using twrp new layout (twrp big) so I booted in recovery, went to Mount and selected only Data then I transferred files from my tablet using "adb push (local) (remote)" !

Stuck after Install Rom

Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?
alexis333 said:
Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?
Click to expand...
Click to collapse
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)
Simple answer.
No.
Now what ?
Husky34 said:
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)
Click to expand...
Click to collapse
This isn't normally required on the M8, unless its some quirk specific to MIUI (which is a ROM I don't a have much knowledge of).
Make sure your TWRP version is up to date.
Make sure your hboot is up to date.
Wipe user data and cache (default wipe in TWRP) before flashing the ROM.
Those are the most common reasons for no boot after flashing multiple ROMs.
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
That may be the issue right there. I know some folks are still using it, but Philz hasn't been updated in a long time. And since some newer ROMs have issues with older TWRP builds, I would assume the same would be true with Philz.
You can get TWRP here: https://dl.twrp.me/m8/
alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
https://twrp.me/devices/htconem8gsm.html
I flashed TPWR and then flashed the new ROM and everything ok.
Thanx for your help men ..
alexis333 said:
Thanx for your help men ..
Click to expand...
Click to collapse
There's a button for that.
Happy it worked for you.

Categories

Resources