Related
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
rodrigofd said:
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
Click to expand...
Click to collapse
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
bonkieash said:
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
Click to expand...
Click to collapse
Are G3 phone OEM warrantied for water damage?
Water-damaging the phone is a risky way to go. I was under the impression that water-damage is not covered, especially since most phones even have a moisture-indicator strip on the motherboard for detecting it. Even if it was covered, what if they do reject warranty due to any reason(including software tampering?). You'll actually end up with an expensive brick then. Atleast now you have a working(albeit buggy) phone.
I'll suggest to wait till the devs can find some way to help you. Was going to suggest you try the Qualcomm HS-USB QDLoader 9008 mode method but it looks like you've already tried that.
Hi, I have the exactly same problem. But after some digging i found this thread : http://forum.xda-developers.com/showthread.php?t=2660566 and http://forum.xda-developers.com/showthread.php?t=2345860
I think that is a long shot, but if somebody provide "debrick image" - (following istructions from the top of the thread) from their D855 devices with lollipop firmware (19h or 20A) it can be worth a try.
Sorry for my english.
bonkieash said:
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
Click to expand...
Click to collapse
LG would not warrantied the phone if its waterproof. They specifically asked you if you crack your screen or has been water damaged. If you do, you either pay a hefty price ($150) or they can refuse to fix it.
jayro28 said:
Click to expand...
Click to collapse
OMG. I'm in the same boat. Do you know where I can get this tool? I would really appreciate!
ifscher said:
OMG. I'm in the same boat. Do you know where I can get this tool? I would really appreciate!
Click to expand...
Click to collapse
Link in PM
jayro28 said:
Link in PM
Click to expand...
Click to collapse
Many thanks! I believe my phone passed the test. It still recognizes my phone as QHSUSB and it doesn't power up, enter recovery nor boot anything.
Do you have any tip to what to do?
jayro28 said:
Link in PM
Click to expand...
Click to collapse
jayro, where i can find the lg smart boot app? can you help me, sorry for my bad english, thank you
jayro28 said:
Link in PM
Click to expand...
Click to collapse
i need that program too please can you giveme a link too thanks in advance.
jayro28 said:
Link in PM
Click to expand...
Click to collapse
hi master plase share with me this tool .
i have g3 qualcomm mode now brick
rodrigofd said:
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2582142
It might work for your situation
Hello all. Please help me. I have a v495 with root replaced by su. all was fine till I was getting ready to install the TWRP recovery. I did not even install it but I did install flashify and twrp manager approving root access but never installed/flashed the revovery img. After installing twrp manager it asked for me to select a device but did not see the v495,496 or 498 so I just exited. I restarted the device and it just sat at the at&t boot logo. again I did not install anything other than flashify and twrp manager. Anyway I panicked and searched online to reset the device thinking I could just start over. I found the directions (hold power and vol down. release power hold vol up down and power). I was able to do factory reset but now its still stuck at the a&t logo and it won't shut off.
Is there anything else I can do?
It is against XDA forum rules to post the same question in multiple threads. Please don't do this in the future. I answered you in the other (first) thread you posted about this problem.
Hi, Sorry for the duplicate post I was not aware.. I thought we just couldn't create new threads with same topic.
Anyway thanks but the waiting did not help. I installed LG Bridge and trying to do software update but I keep getting LGE MTP driver failed install errors.. Holding the up and power buttons allowed me to shut the device off and enter charge only state. Wish there was a way to reload the stock rom but I have not found any software or roms as of yet.
SOL
unfortunately for any ATT customer it is the hardest to get any firmware for any of their devices. I dont know why they feel the need to make it proprietary. I had run into the same problem and I am not getting anywhere with it. There is chinese website that says it has the stock kdz file for it but you need 5 coins or some type of BS to even look at it.
Well this socks...
I guess my car tab project will have to wait till we get some dev support. Im surprised there are so few of us seeing how these things were practically being given away at one point.
Bryan858 said:
I guess my car tab project will have to wait till we get some dev support. Im surprised there are so few of us seeing how these things were practically being given away at one point.
Click to expand...
Click to collapse
Sorry I don't have any other ideas. I feel your pain. It's a similar situation with my VK810 but at least there has been some development and TWRP was updated thankfully, plus Verizon releases the firmware.
atxdave said:
unfortunately for any ATT customer it is the hardest to get any firmware for any of their devices. I dont know why they feel the need to make it proprietary. I had run into the same problem and I am not getting anywhere with it. There is chinese website that says it has the stock kdz file for it but you need 5 coins or some type of BS to even look at it.
Click to expand...
Click to collapse
Please could you link to the Chinese site for some of us who have no alternatives? If the site does really have the firmware I don't mind paying to get it, but be certain I will re-upload and link here. Thanks.
ezeuba said:
Please could you link to the Chinese site for some of us who have no alternatives? If the site does really have the firmware I don't mind paying to get it, but be certain I will re-upload and link here. Thanks.
Click to expand...
Click to collapse
Probably the same as for my device. http://www.lgbbs.com:41/thread-838-1-1.html. Not willing to pay for it since I don't need it, but if you need it bad enough I think it equates to 10 U.S. dollars last I checked. Note that the one I linked to is supposed to be the one for my device, the VK810.
roirraW "edor" ehT said:
Probably the same as for my device. http://www.lgbbs.com:41/thread-838-1-1.html. Not willing to pay for it since I don't need it, but if you need it bad enough I think it equates to 10 U.S. dollars last I checked. Note that the one I linked to is supposed to be the one for my device, the VK810.
Click to expand...
Click to collapse
Thanks for the link, but I didn't find my model's firmware there - V495 AT&T... I would willingly pay to download this firmware so I can fix my issue. I rooted mine, didn't like the Kingroot su manager and changed it to SuperSU with Supersume and the tab didn't boot again. It just hangs at the LG logo, or if I leave it for long it will show the AT&T logo and that's all. I wish I never messed with it. Just brand new off ebay.
ezeuba said:
Thanks for the link, but I didn't find my model's firmware there - V495 AT&T... I would willingly pay to download this firmware so I can fix my issue. I rooted mine, didn't like the Kingroot su manager and changed it to SuperSU with Supersume and the tab didn't boot again. It just hangs at the LG logo, or if I leave it for long it will show the AT&T logo and that's all. I wish I never messed with it. Just brand new off ebay.
Click to expand...
Click to collapse
Kick me if this is too obvious, but have you tried Googling:
Code:
V495 TOT
or
Code:
V495 KDZ
?
Although I might be wrong, but I think I heard that Sprint and AT&T don't provide KDZs for LG devices.
Is it still under LG's warranty? Do you have the IMEI/serial number for it that you can try to RMA it through LG? I got excellent warranty service for my model when I needed it. Don't tell them what you tried doing to it, though.
It gets worse... From really bad to terribly worse... I searched and searched and searched for the V495 KDZ to no avail, but I saw for V490 and V496. I downloaded both. I tried with V490 and it flashed and booted but touchscreen was not responsive. I guess due to not being for the exact same version. I tried the V496 which is the same model but the T-Mobile variant. The flashing went well until around 85% when the screen went blank and although the flashing completed, the screen never came up again, yet it makes a sound when connected to the laptop. So I went into Device Manager on my laptop to see how things were, and what it was seeing it as was HSUSB DQLoader 9008 or something like that. A hard brick!!! All because I tried to root this device... Some things are better left without messing around with them... However, if there's any help I would appreciate it very much; this is a new tab, still with the cover screen unremoved...
ezeuba said:
It gets worse... From really bad to terribly worse... I searched and searched and searched for the V495 KDZ to no avail, but I saw for V490 and V496. I downloaded both. I tried with V490 and it flashed and booted but touchscreen was not responsive. I guess due to not being for the exact same version. I tried the V496 which is the same model but the T-Mobile variant. The flashing went well until around 85% when the screen went blank and although the flashing completed, the screen never came up again, yet it makes a sound when connected to the laptop. So I went into Device Manager on my laptop to see how things were, and what it was seeing it as was HSUSB DQLoader 9008 or something like that. A hard brick!!! All because I tried to root this device... Some things are better left without messing around with them... However, if there's any help I would appreciate it very much; this is a new tab, still with the cover screen unremoved...
Click to expand...
Click to collapse
I'm really sorry to hear about that. That sucks. Unfortunately, recovering from QHBUSB BULK 9008 mode requires a TOT file, although I've wondered if it might also work with a KDZ, but in your case you can't find either so there's really no hope.
Are you going to see if it's under warranty with LG and try to RMA it?
I guess you know this now, but never, ever flash something that's made for a different model/variant, although in your case it didn't really hurt to try since either way you were bricked.
---------- Post added at 08:01 AM ---------- Previous post was at 07:54 AM ----------
@ezeuba, I did a variation of one of the previous searches I suggested. I Googled for:
Code:
at&t v495 tot
The second and third links look promising.
roirraW "edor" ehT said:
I'm really sorry to hear about that. That sucks. Unfortunately, recovering from QHBUSB BULK 9008 mode requires a TOT file, although I've wondered if it might also work with a KDZ, but in your case you can't find either so there's really no hope.
Are you going to see if it's under warranty with LG and try to RMA it?
I guess you know this now, but never, ever flash something that's made for a different model/variant, although in your case it didn't really hurt to try since either way you were bricked.
---------- Post added at 08:01 AM ---------- Previous post was at 07:54 AM ----------
@ezeuba, I did a variation of one of the previous searches I suggested. I Googled for:
Code:
at&t v495 tot
The second and third links look promising.
Click to expand...
Click to collapse
If only I could read Chinese... Google Translate doesn't work for that site... I wouldn't mind paying to download the file, if I could see how...
ezeuba said:
If only I could read Chinese... Google Translate doesn't work for that site... I wouldn't mind paying to download the file, if I could see how...
Click to expand...
Click to collapse
Although the "Translate this page" link next to each search result didn't work, it still translated fine for me after loading both pages the normal way.
If only there was a way to 'make' a tot file from another V495 tab's files... I got the second one now and have no intention of messing with it again. I only wonder if it were possible to 'create' a tot file one can use in unbricking the bricked one... Just a thought...
ezeuba said:
If only there was a way to 'make' a tot file from another V495 tab's files... I got the second one now and have no intention of messing with it again. I only wonder if it were possible to 'create' a tot file one can use in unbricking the bricked one... Just a thought...
Click to expand...
Click to collapse
I've wondered about the same - possibility to create KDZs and TOTs out of partition image files. After all, there are tools to extract both, so although possibly more difficult, theoretically it should be possible to create both. I have no knowledge that would help look into the possibility, however.
Did you pursue any further getting to that page? I can still get to it fine.
roirraW "edor" ehT said:
I've wondered about the same - possibility to create KDZs and TOTs out of partition image files. After all, there are tools to extract both, so although possibly more difficult, theoretically it should be possible to create both. I have no knowledge that would help look into the possibility, however.
Did you pursue any further getting to that page? I can still get to it fine.
Click to expand...
Click to collapse
Yea, I could get to that page but still cannot make out how to pay to download the KDZ. It would be great if any mandarin speakers could help us out...
ezeuba said:
Yea, I could get to that page but still cannot make out how to pay to download the KDZ. It would be great if any mandarin speakers could help us out...
Click to expand...
Click to collapse
Did you get it to translate by choosing to translate *after* loading the webpage? You should first register on the site in the upper right corner.
You probably have to buy credits using PayPal, then use those credits to buy the link to the TOT, lower on the page.
Hello Xda
I tried to update my phone using LG Tool , But while the update process my PC shut down randomly . and my LG won't work anymore at all
but when i connect it to my PC , it recognize the mobile as qhsusb_bulk .
Please Advice ....
Thank you all
Sorry to be the bearer of bad news, as you've guessed it though. Looks like you got a brick in the oven and can't feed your droid any new data now. Unfortunately, I don't know of any sure shot methods that will bring it up to par. I suggest either contacting verizon for a new device or the insurance for a new device. Maybe someone who's working on the bootloader, if there are any can help you but by the sound of it, you need a funeral service for your device. Sorry for the fluxed luck. Who knows though, I am not always 100,000% accurate with devices which aren't in front of me to tinker with. Best of Everything lucky to ya though.
justlovejoy said:
Sorry to be the bearer of bad news, as you've guessed it though. Looks like you got a brick in the oven and can't feed your droid any new data now. Unfortunately, I don't know of any sure shot methods that will bring it up to par. I suggest either contacting verizon for a new device or the insurance for a new device. Maybe someone who's working on the bootloader, if there are any can help you but by the sound of it, you need a funeral service for your device. Sorry for the fluxed luck. Who knows though, I am not always 100,000% accurate with devices which aren't in front of me to tinker with. Best of Everything lucky to ya though.
Click to expand...
Click to collapse
Yeah I felt it's so complicated , I have some experience on Rooting and dealing with software issues , but this on is totally new for me.
Thank You Sir
Man that's a huge bummer, sorry to hear. If you have a spare phone and don't mind sitting on that one for a while eventually the files should be available to fix this but no eta is known.
MrSrojy said:
Hello Xda
I tried to update my phone using LG Tool , But while the update process my PC shut down randomly . and my LG won't work anymore at all
but when i connect it to my PC , it recognize the mobile as qhsusb_bulk .
Please Advice ....
Thank you all
Click to expand...
Click to collapse
This happened to me too, but i didnt use the LG Flash Tool cause it wasnt working for me so i used LG UP instead. I flashed the right .kdz file for my model and everything but when it finished flashing it remained in a bootloop and now it wont turn on. whenever try to put it in dl mode it doesnt show up with the screens i just see it connected as qhsusb_bulk in the device manager.
i have the open international version so im guessing bootloader so im gonna wait for fix files :fingers-crossed: although its gonna be a while im pretty sure :crying::crying::crying:
blap017 said:
Man that's a huge bummer, sorry to hear. If you have a spare phone and don't mind sitting on that one for a while eventually the files should be available to fix this but no eta is known.
Click to expand...
Click to collapse
What are the files that one would need to fix this? Have they been released now? I've got a phone being recognized as a QHSUSB_BULK as well, and I'm wondering if these files would revive mine as well.
https://forum.xda-developers.com/tmobile-g4/general/lg-g4-h811-complete-unbrick-guide-100-t3461629 do some google searches for lg g4 unbrick tool then read and read and read.
Hi,
I have a LG prototype model LG 985. Phone had limited functionality so i tried to install GApps and some how it went wrong and Phone lands in Secure Booting Error.
I contacted LG support in India. they were not able to work on this phone because it doesn't have India IMEI and they don't have flash file for E985.
Now i am totally stuck in this. let me know how i can fix it. i am fine with LG flash or cynogen. i just need this phone active.
i went thru many thread but most of thread's link are not working. can someone provide me complete steps and working link ?
Thank you in advance and looking for positive response.
Thanks
mukesh_bhootra said:
Hi,
I have a LG prototype model LG 985. Phone had limited functionality so i tried to install GApps and some how it went wrong and Phone lands in Secure Booting Error.
I contacted LG support in India. they were not able to work on this phone because it doesn't have India IMEI and they don't have flash file for E985.
Now i am totally stuck in this. let me know how i can fix it. i am fine with LG flash or cynogen. i just need this phone active.
i went thru many thread but most of thread's link are not working. can someone provide me complete steps and working link ?
Thank you in advance and looking for positive response.
Thanks
Click to expand...
Click to collapse
Kdz
@mukesh_bhootra check the general session. There's a sticky thread about returning to stock. There you'll find a kdz filed for your e985. This thread is by Hyelton if I'm not wrong.
mukesh_bhootra said:
Hi,
I have a LG prototype model LG 985. Phone had limited functionality so i tried to install GApps and some how it went wrong and Phone lands in Secure Booting Error.
I contacted LG support in India. they were not able to work on this phone because it doesn't have India IMEI and they don't have flash file for E985.
Now i am totally stuck in this. let me know how i can fix it. i am fine with LG flash or cynogen. i just need this phone active.
i went thru many thread but most of thread's link are not working. can someone provide me complete steps and working link ?
Thank you in advance and looking for positive response.
Thanks
Click to expand...
Click to collapse
I fix my phone through flashing cyanogenmod and gapps. I wipe dalvik cache, cache, and system and start to flash it. Hope it help for you and im using lg g2 normally with it
Hi guys;
So i bought a second hand unlocked D851 ( TMOBILE) with kitkat (cloudy rom) wanted to upgrade it to lolipop but i hard bricked it then used board diag program to bring it back to life but i extracted a d850 rom TOT since the d851 didnt work so now my lg g3 is at&t and permenantly locked ,been trying for a week now to unlocked it for nothing then I read somewhere in this forum that its easy to unlock the d851 using the tmobile app. so is there any way to change it back to D851.
Anyone has any idea?!!
how u use the board diag cuz im stock in qualcomm hs-usb qdloader 9008 and the threadt is closed now
ipus89 said:
how u use the board diag cuz im stock in qualcomm hs-usb qdloader 9008 and the threadt is closed now
Click to expand...
Click to collapse
Try this thread... it is still open & active: https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
startswithPendswithOOH said:
Try this thread... it is still open & active: https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Click to expand...
Click to collapse
how about my problem??!!!
nice8man said:
how about my problem??!!!
Click to expand...
Click to collapse
1)What do you mean permanently locked...carrier/sim, mcafee security, something else? If it's carrier you can order a sim unlock code off of ebay for @$4.00 us, or use any other sim unlock services out there.
2)If you changed a d851 to a d850 using board diag and manually loading the partitions - then why not extract a d851 tot and do the same thing?
startswithPendswithOOH said:
1)What do you mean permanently locked...carrier/sim, mcafee security, something else? If it's carrier you can order a sim unlock code off of ebay for @$4.00 us, or use any other sim unlock services out there.
2)If you changed a d851 to a d850 using board diag and manually loading the partitions - then why not extract a d851 tot and do the same thing?
Click to expand...
Click to collapse
thank you for the reply.
1- its carrier unlock + i have no online wallet and i cant get one
2- thats what im looking for is there a way to manually load d851 partitions i mean when i loaded d850 partitions my phone was in dload mode ( hard bricked) do i have to hard unbrick now again?
by the way i can search for other carriers and i find mine under rat:GSM but i m unable to connect to it .
nice8man said:
thank you for the reply.
1- its carrier unlock + i have no online wallet and i cant get one
2- thats what im looking for is there a way to manually load d851 partitions i mean when i loaded d850 partitions my phone was in dload mode ( hard bricked) do i have to hard unbrick now again?
by the way i can search for other carriers and i find mine under rat:GSM but i m unable to connect to it .
Click to expand...
Click to collapse
1) I don't know of a free way to get an unlock code, so if you can't order one you're probably stuck. Pay a friend who can order one for you?
2) If we're on the same page here and you previously used the board diag tool then that should work again. Hard brick usually shows up in your device manager as qualcomm 9008 instead of an lg device, so to get back to that condition you would have to open the phone up and short a pin -
follow the guide in the link I posted before and you should be good to go. I don't have links for any d851 tot files though...sorry, not my variant.
startswithPendswithOOH said:
1) I don't know of a free way to get an unlock code, so if you can't order one you're probably stuck. Pay a friend who can order one for you?
2) If we're on the same page here and you previously used the board diag tool then that should work again. Hard brick usually shows up in your device manager as qualcomm 9008 instead of an lg device, so to get back to that condition you would have to open the phone up and short a pin -
follow the guide in the link I posted before and you should be good to go. I don't have links for any d851 tot files though...sorry, not my variant.
Click to expand...
Click to collapse
so i need to hard brick my phone again?
nice8man said:
so i need to hard brick my phone again?
Click to expand...
Click to collapse
Unfortunately...I think so. If you were to try and use the lg flash tool and try and tot a d851 file into a d850 it'll probably throw some errors - model check, for ex - and won't flash. You can try and see for yourself if you'd like...here's a link for a couple tools; the 1st is kdz method, second is tot: https://forum.xda-developers.com/showthread.php?t=2785089
To brick it again follow guide I linked( https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359), short that 2nd jtag pin in the pic for @5 seconds, plug in the usb, and it should go to qualcomm 9008. You already know how to do the rest as far as loading partitions and such, and if you don't the guide will tell you what to do.
Good luck :good:
startswithPendswithOOH said:
Unfortunately...I think so. If you were to try and use the lg flash tool and try and tot a d851 file into a d850 it'll probably throw some errors - model check, for ex - and won't flash. You can try and see for yourself if you'd like...here's a link for a couple tools; the 1st is kdz method, second is tot: https://forum.xda-developers.com/showthread.php?t=2785089
To brick it again follow guide I linked( https://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359), short that 2nd jtag pin in the pic for @5 seconds, plug in the usb, and it should go to qualcomm 9008. You already know how to do the rest as far as loading partitions and such, and if you don't the guide will tell you what to do.
Good luck :good:
Click to expand...
Click to collapse
the link you attached is for mobiles that are already hard bricked mine is not
nice8man said:
the link you attached is for mobiles that are already hard bricked mine is not
Click to expand...
Click to collapse
Yeah....and?
Re-read your previous post where you asked if you'll have to brick it again.
I said yes, and gave you a link on how to do it. Did you read the link? My guess would be no, since the 1st 4 steps tell you how to brick it and enter qualcomm9008 mode.
You're on your own now. Good luck. And you're welcome for the time I spent trying to help you.
startswithPendswithOOH said:
Yeah....and?
Re-read your previous post where you asked if you'll have to brick it again.
I said yes, and gave you a link on how to do it. Did you read the link? My guess would be no, since the 1st 4 steps tell you how to brick it and enter qualcomm9008 mode.
You're on your own now. Good luck. And you're welcome for the time I spent trying to help you.
Click to expand...
Click to collapse
Thank you for your replies man i really appriciate it...i have read that topic like 5 times; maybe i dont understand english very well but when i read the title LG G3 Hard Brick Recovery+ Required Materials:Bricked LG G3 i thought he meant that this topic is for people that has thier phone bricked and need to recover them.
nice8man said:
Thank you for your replies man i really appriciate it...i have read that topic like 5 times; maybe i dont understand english very well but when i read the title LG G3 Hard Brick Recovery+ Required Materials:Bricked LG G3 i thought he meant that this topic is for people that has thier phone bricked and need to recover them.
Click to expand...
Click to collapse
It's cool. Yes the guide is for already bricked phones, but what I was trying to say is since you have a functional phone rt now you're gonna have to brick it, and by brick it I mean qualcomm9008 mode, and that's what the 1st part of the guide shows you how to do by shorting out the pin. Once you get to Qualcomm mode you can then use the board diag tool and load your partitions that you extracted from the tot and hopefully get back to your original d851 phone and get back up and running. Does that make more sense?
Again...good luck
startswithPendswithOOH said:
It's cool. Yes the guide is for already bricked phones, but what I was trying to say is since you have a functional phone rt now you're gonna have to brick it, and by brick it I mean qualcomm9008 mode, and that's what the 1st part of the guide shows you how to do by shorting out the pin. Once you get to Qualcomm mode you can then use the board diag tool and load your partitions that you extracted from the tot and hopefully get back to your original d851 phone and get back up and running. Does that make more sense?
Again...good luck
Click to expand...
Click to collapse
I did not know that you can hard brick the phone by shorting the pins; thank you.
startswithPendswithOOH said:
It's cool. Yes the guide is for already bricked phones, but what I was trying to say is since you have a functional phone rt now you're gonna have to brick it, and by brick it I mean qualcomm9008 mode, and that's what the 1st part of the guide shows you how to do by shorting out the pin. Once you get to Qualcomm mode you can then use the board diag tool and load your partitions that you extracted from the tot and hopefully get back to your original d851 phone and get back up and running. Does that make more sense?
Again...good luck
Click to expand...
Click to collapse
I hard bricked it again and then extracted another D851 tot and then loaded all the necessary partitions but the phone still on qload mode i copied the sbl1.mbm of the D850 and tried them with D851 partitions the phone revived but not in download mode.
I managed tp recover all partitions and the phone is on dowloading mode but still detected as d850 so i have the dll cross error everytime i try to flash a rom even with using the custon dll file.