Related
Well, my Desire is on it's last legs.
The home button needs to be hit a few times to work, can't connect to PC, camera works, but when you exit it won't work till the phone has been rebooted and the charging point on the bottom is pretty much destroyed. Can only charge the phone by bending the actual metal part on the charger and wrapping the charger wire around the phone!
Just wandering what it the best thing to do? I don't have money for a new phone, so that's out, and 3UK won't fix/replace my phone as they say it has been "water damaged".
Anyone got any advice?
If you'd of insured it you could of gotten a new phone. Not much you can do since it's hardware related. Ask HTC directly and see what they can do to it.
well, i' have installed roms for a while and everything is ok, but in last days my phone sometimes stop responding, the screen doesn't turn on pushing the power button, but the funny is that apparently the phone still working, how do I know? if i have patience after a moment maybe 10 mins or in other cases is delayed 1 day the screen shows up in the last part where it was.
Now when I don't have patience and i pull off the battery and try to turn on the phone, the phone apparently turn on, vibrate, and then show the blue light and thats all , the phone still has keep in the black screen and I have to pull off the battery and repeat the process until the phone wants turn on
please help me this problem is really stressful
and a extra information..
2 or 3 months ago my phone fell down in a pool
maybe the problem is the battery? any help is valuable for me
So I can tell you 90% your Xperia Play suffers from a disease called "the flex cable damaged" disease. Your phone will have to undergo a surgery which will replace the damaged flex cable with a new one. Flex cable is the cable which connects the motherboard to the screen. Common issue for Xperia Play. Revert to stock, and I mean completely stock, then send to Sony Centre and replace for free if you still have warranty.
woww that was fast, unfortunately I have no warranty, my cousin throw me at the pool so i think he can pay me the flex cable... do you know how much is it?
by the way........rhank you sooooooo much
Er I am not sure about the price cause I got mine fixed under warranty. But I think it's not really expensive
So a tip for us is that open the slider slowly to avoid damage to the flex cable right?
Sent from my R800i using xda app-developers app
sufy1000 said:
So a tip for us is that open the slider slowly to avoid damage to the flex cable right?
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Yep. Some people always push up hard (I am one of them ) then my flex cable is damaged.
I don't think it has anything to do with how hard you're using the device.
It has to do with how it was installed from the factory.
sometimes the cable can get bunched up underneath the screen and get a crimp in it.
My other spare screen slider cord has been crimped and i don't know how much longer it will last
but my other one is totally fine.
Guys I had problems too with my XP. One day the screen became all glitchy than i changed my flex cable and now the Device goes on when I push the on/off button the device thrills but no screen.
Any solution for this all ready flashed stock .TFT file.
Hi guys,
i have some issues with charging my inc2.
it is not accepting any charge anymore, tried diffrent chargers, cables, even on my pc but nothing. The orange charging LED just flashes slowly on and off...
Any ideas?
Need to replace phone or replace charging port.
Sent from my Galaxy Nexus using xda app-developers app
Snake-Plissken said:
Hi guys,
i have some issues with charging my inc2.
it is not accepting any charge anymore, tried diffrent chargers, cables, even on my pc but nothing. The orange charging LED just flashes slowly on and off...
Any ideas?
Click to expand...
Click to collapse
Yes, unfortunately it is a known hardware issue. Over time, the charging port starts coming loose. Like mentioned above, you CAN fix it yourself. There are video tutorials on YouTube and the replacement part can be had for under $10. If your device is still under warranty, Verizon will replace the phone. If it's not under warranty (or if you just want to give it a go), the port replacement process is pretty straightforward.
I might give it a try. Does anybody have a video or a link?
The weird thing is, that the battery is discharging very fast, could it be just a bad battery?
Sent from my GT-N7100 using Tapatalk 2
Could b the back door on your inc 2. I believe you need the back door on to charge cuz it goes thru contacts on the back. I dropped mine one day and charging and getting signal was almost impossible till I figured that out and bought a new one
Ok.
Seems to charge now. Won't touch it until it is full. After that I will check what is going on.
I don't know where this issue came from.never dropped it nothing. It was even in a Otterbox
Sent from my GT-N7100 using Tapatalk 2
The issue stems from regular use. The charging port is essentially held in place only by the connections to the board. Repeatedly plugging and unplugging the power cable causes it to break over time.
actually just replaced the charger port on my incredible 2 today. It really wasn't that difficult at all. If you have any questions feel free to PM me
yeah it has to be replaced. happened to me last month. It's honestly like the worst flaw with this phone
Snake-Plissken said:
Ok.
Seems to charge now. Won't touch it until it is full. After that I will check what is going on.
I don't know where this issue came from.never dropped it nothing. It was even in a Otterbox
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Def need to replace it. Same issues I was having at one point with it randomly taking charge. I found that if the charger is plugged in a held a certain level ( i placed the phone on a flat surface with a book under the cord for leverage) it would charge just fine.
If you are rooted and sending back, make sure you revert to stock to avoid any annoyances.
I've managed to solve this issue without messing around with the phone's innards (the last time I did it was a disaster and I was forced to buy an entirely new phone). It's not pretty, but if you twist a rubber band around the micro usb end of your charger, plug your phone in, twist that same rubber band around the phone itself, and make sure the connection very tight, you might get some more life out of your charger port.
Ugh. I can't wait for my upgrade.
Nice name there Dave.
sent from my paranoid android
gdwy89 said:
I've managed to solve this issue without messing around with the phone's innards (the last time I did it was a disaster and I was forced to buy an entirely new phone). It's not pretty, but if you twist a rubber band around the micro usb end of your charger, plug your phone in, twist that same rubber band around the phone itself, and make sure the connection very tight, you might get some more life out of your charger port.
Ugh. I can't wait for my upgrade.
Click to expand...
Click to collapse
While, I give you major kudos points for MacGuyver-ing a solution, that's more of a quick band-aid than a real fix. I could imagine having a rubber band around the phone could potentially hinder usage.
But hey, way to think outside the box! :good:
Card83 said:
While, I give you major kudos points for MacGuyver-ing a solution, that's more of a quick band-aid than a real fix. I could imagine having a rubber band around the phone could potentially hinder usage.
But hey, way to think outside the box! :good:
Click to expand...
Click to collapse
Thank you. You're telling me. Do you know how hard it is to use a touch screen with a rubber band across it? Oy.
Right. The caveat here, of course, is that this technique will only help charge your phone until the charging port becomes so disconnected from the board that no amount of force will reestablish this contact. And this will inevitably happen because you're going to keep plugging and unplugging your phone from the charger which is what created the issue in the first place.
If you know you have big, sweaty, idiot hands (like me) that are going to destroy your phone if you take it apart (like me) and you can tough it out: more power to you. The other alternative is to buy an external battery charger and a second battery. The disadvantages here are pretty obvious (e.g. you have to carry a second battery around; if you forget a second battery, you can't ask another Android user to borrow their phone charger, etc.).
So sad story
Long story short,i broke my nexus's screen.Walking on the street,and bumped into a metal cone. it broke,but my phone is completely dead,but the battery was empty.the problem is,when i got home,i plugged it in,left it about half an hour,and when i tried to turn it on it didn't show any signs of life (vibration,etc..). i i dissasembled it and looked at the motherboard,and everything was ok,and no pins were unplugged.Assembled it again,and still nothing. so i dont know what could be the problem. and if anyone had similar problems and can tell me anything,i would appreciate it,cuz now i have to live with a sh*tty xperia x8. thanks in advance.
The impact seems to have damaged more than just the screen. Since there is absolutely no sign of life in the phone your choices fall down to repairing (probably not cost effective) or scrapping the phone.
I think the problem is somewhere else,in the battery connectors. I left the phone charging all day,and the battery was cool,but the rest of the phone was hot. I dont know...also,i think my power button dislocated.
Maybie i get it working,but nevermind,im already collecting money for a friend's nexus.
Sent from my E15i using Tapatalk 2
I thought I'd share my experience with this, as I've seen posts in the past relating to a water damaged phone boot looping and I don't think I've seen a proper solution given.
First thing's first, this advice is in relation to a very specific type of boot looping. Nothing to do with rooting, or software bugs. This is boot looping that has come about as a result of water damage. It may not have been long, maybe a couple of seconds in the toilet or some brief rain exposure. Whatever it is, you know your phone has been exposed to some water and it has begun boot looping. There will be no way to get out of it, as the phone boots for 2/3 seconds max before looping all over again. Even when you go into recovery, same thing, automatically boot loops.
Most people, including the official HTC Service Centre, will tell you the motherboard is fried and needs replacement. Whilst it is possible that may be true, it isn't guaranteed. It's an easy way out for HTC, as they can charge you an extortionate price for a new motherboard and not have to bother going through the work of taking the phone apart to find out what is wrong.
The solution may be much simpler - the Power Flex Cable. This is a very small cable that goes along the top of your phone. WHen water damaged, this cable can become damaged, causing a constant boot loop. The reason being it constantly tells the phone the power button is on, causing a constant on/off cycle. In this instance the motherboard is fine and you can get a replacement Flex Cable for less than £5!
There is an easy way to tell whether the Flex Cable is the likely cause of your looping. When the phone is looping, hold down the down volume button only. Don't touch the power button. If your phone still goes into recovery (then loops again) then it is entirely possible your Flex Cable is damaged, not your motherboard.
Next step, order a Flex Cable (they are easy to find). When it arrives, you will need to open your phone (there are guides on YouTube for this), detach the motherboard and replace the Flex Cable. An advance warning, this isn't easy and you have to be extremely careful. One bad move and your phone is history. The motherboard is delicate. If you look around the internet you will find guides which show how the HTC One X is configured. Note that the Flex Cable is behind the motherboard and quite awkward to get off. I would post a couple of links but as a new member I'm not allowed! PM me and I'm happy to share some helpful links though.
You'll know quickly if this has worked. When connecting your phone it will no longer loop. Let it charge for a little while, then power on and hope for the best. If the Flex Cable was the problem your phone will reboot, and you will be able to use it and get your data off.
Note that water damage can have long lasting effects on a mobile phone. Whilst this may solve the problem for a while, it's entirely possible your phone will fail at some point down the line. Prepare for that and make sure you back up accordingly. The above advice may give you a lifeline in getting data off your phone, though, and being able to use it for a little longer. I know that when I was looking around the net I only found this advice by chance, and I think it was on a non-phone related forum. This advice may exist on the forum somewhere but if so it isn't so easy to find. I hope somebody may come across this topic when trying to fix their water damaged phone and find it is the solution.
Good luck!
Same symptoms, but no water damage
Hey man,
Thanks a ton for your post. I have the same issue, as in it won't stop booting at all. However, mine didn't happen because of water damage, but when I tried to do a factory reset (the phone was only on 5% charge so I'm not sure if that screwed it up). Do you think it could still be solved with a flex cable? I tried holding just the volume button down, and it does go into the bootloader so it seems pretty much exactly like what you have described!
Cheers
My only experience with replacing the flex cable comes from water damage, I'm not sure whether a software fault (as this appears to be) could have any effect on the cable itself!
When you get into the bootloader screen, does it just cycle all the way through to fastboot without allowing you to select any other options before rebooting? If so it would suggest your phone thinks the power button is constantly pushed down, which is suggestive of a power flex cable fault.
These cables are very cheap to buy, so if you aren't able to do anything else with the phone it's definitely worth a shot, even if it doesn't work. Just remember that opening the phone voids your warranty, and be careful if you do attempt it, as the insides of the One X are quite delicate. It would be very easy to break something!
de4life said:
My only experience with replacing the flex cable comes from water damage, I'm not sure whether a software fault (as this appears to be) could have any effect on the cable itself!
When you get into the bootloader screen, does it just cycle all the way through to fastboot without allowing you to select any other options before rebooting? If so it would suggest your phone thinks the power button is constantly pushed down, which is suggestive of a power flex cable fault.
These cables are very cheap to buy, so if you aren't able to do anything else with the phone it's definitely worth a shot, even if it doesn't work. Just remember that opening the phone voids your warranty, and be careful if you do attempt it, as the insides of the One X are quite delicate. It would be very easy to break something!
Click to expand...
Click to collapse
I had to replace my power flex cable when I was changing my battery as I accidentally snapped it.
Kahun said:
I had to replace my power flex cable when I was changing my battery as I accidentally snapped it.
Click to expand...
Click to collapse
It's very easy to do, the flex cable is a fragile piece. There are quite a few parts inside the HOX which could easily snap, which is why I always urge a lot of caution when opening the phone up!
de4life said:
I thought I'd share my experience with this, as I've seen posts in the past relating to a water damaged phone boot looping and I don't think I've seen a proper solution given.
First thing's first, this advice is in relation to a very specific type of boot looping. Nothing to do with rooting, or software bugs. This is boot looping that has come about as a result of water damage. It may not have been long, maybe a couple of seconds in the toilet or some brief rain exposure. Whatever it is, you know your phone has been exposed to some water and it has begun boot looping. There will be no way to get out of it, as the phone boots for 2/3 seconds max before looping all over again. Even when you go into recovery, same thing, automatically boot loops.
Most people, including the official HTC Service Centre, will tell you the motherboard is fried and needs replacement. Whilst it is possible that may be true, it isn't guaranteed. It's an easy way out for HTC, as they can charge you an extortionate price for a new motherboard and not have to bother going through the work of taking the phone apart to find out what is wrong.
The solution may be much simpler - the Power Flex Cable. This is a very small cable that goes along the top of your phone. WHen water damaged, this cable can become damaged, causing a constant boot loop. The reason being it constantly tells the phone the power button is on, causing a constant on/off cycle. In this instance the motherboard is fine and you can get a replacement Flex Cable for less than £5!
There is an easy way to tell whether the Flex Cable is the likely cause of your looping. When the phone is looping, hold down the down volume button only. Don't touch the power button. If your phone still goes into recovery (then loops again) then it is entirely possible your Flex Cable is damaged, not your motherboard.
Next step, order a Flex Cable (they are easy to find). When it arrives, you will need to open your phone (there are guides on YouTube for this), detach the motherboard and replace the Flex Cable. An advance warning, this isn't easy and you have to be extremely careful. One bad move and your phone is history. The motherboard is delicate. If you look around the internet you will find guides which show how the HTC One X is configured. Note that the Flex Cable is behind the motherboard and quite awkward to get off. I would post a couple of links but as a new member I'm not allowed! PM me and I'm happy to share some helpful links though.
You'll know quickly if this has worked. When connecting your phone it will no longer loop. Let it charge for a little while, then power on and hope for the best. If the Flex Cable was the problem your phone will reboot, and you will be able to use it and get your data off.
Note that water damage can have long lasting effects on a mobile phone. Whilst this may solve the problem for a while, it's entirely possible your phone will fail at some point down the line. Prepare for that and make sure you back up accordingly. The above advice may give you a lifeline in getting data off your phone, though, and being able to use it for a little longer. I know that when I was looking around the net I only found this advice by chance, and I think it was on a non-phone related forum. This advice may exist on the forum somewhere but if so it isn't so easy to find. I hope somebody may come across this topic when trying to fix their water damaged phone and find it is the solution.
Good luck!
Click to expand...
Click to collapse
Thanks. I've already taken the back off and noticed some broken bits of plastic...from the back....but I did notice a bit of ribbon that looked a bit screwed up....I'm gonna take it to the gizmo wizard to fix once I buy a new power flex cable.
Good luck!
Another thing to try
de4life said:
Good luck!
Click to expand...
Click to collapse
Old thread I know but thought it was worth adding that with a water damaged phone the issues can result from the fact that tap water contains minerals which can leave a conductive residue when it dries - can change resistances, cause shorts etc. What I've done previously is used isopropyl alcohol (tape head cleaning fluid) with a toothbrush on the motherboard. Brought a phone back to life. This removes the mineral deposits and cleans everything. Had to remove the metal covers from the mobo first though. If a phone is basically dead or not working right after water damage then it's worth a go. As de4life says, just need to be super careful on the HOX with all the delicate ribbon cables.
Indeed, the phone should be thoroughly clensed if possible to wipe out any corrosive liquids left behind from the water (especially if it's dropped in an ocean). The effects of corrosion can be very slow and potentially last for months.
M8 please reply to this all the flex cables that I found are 40$+ can you give me a link for one as you stated that would cost 5 pounds
It worked
It worked! I replaced the power flex cable with a spare one on my HTC One X, previously damaged by being sucked by my one year old son - water damage.! It worked!
Many thanks to you man!
IamNewBee said:
Many thanks to you man!
Click to expand...
Click to collapse
Wondering if this is the right cable?
http://www.ebay.com/itm/New-Power-O...972183?hash=item27d4be6597:g:n6AAAOSw9GhYbb-y
Thanks!
Thank you!
de4life said:
I thought I'd share my experience with this, as I've seen posts in the past relating to a water damaged phone boot looping and I don't think I've seen a proper solution given.
First thing's first, this advice is in relation to a very specific type of boot looping. Nothing to do with rooting, or software bugs. This is boot looping that has come about as a result of water damage. It may not have been long, maybe a couple of seconds in the toilet or some brief rain exposure. Whatever it is, you know your phone has been exposed to some water and it has begun boot looping. There will be no way to get out of it, as the phone boots for 2/3 seconds max before looping all over again. Even when you go into recovery, same thing, automatically boot loops.
Most people, including the official HTC Service Centre, will tell you the motherboard is fried and needs replacement. Whilst it is possible that may be true, it isn't guaranteed. It's an easy way out for HTC, as they can charge you an extortionate price for a new motherboard and not have to bother going through the work of taking the phone apart to find out what is wrong.
The solution may be much simpler - the Power Flex Cable. This is a very small cable that goes along the top of your phone. WHen water damaged, this cable can become damaged, causing a constant boot loop. The reason being it constantly tells the phone the power button is on, causing a constant on/off cycle. In this instance the motherboard is fine and you can get a replacement Flex Cable for less than £5!
There is an easy way to tell whether the Flex Cable is the likely cause of your looping. When the phone is looping, hold down the down volume button only. Don't touch the power button. If your phone still goes into recovery (then loops again) then it is entirely possible your Flex Cable is damaged, not your motherboard.
Next step, order a Flex Cable (they are easy to find). When it arrives, you will need to open your phone (there are guides on YouTube for this), detach the motherboard and replace the Flex Cable. An advance warning, this isn't easy and you have to be extremely careful. One bad move and your phone is history. The motherboard is delicate. If you look around the internet you will find guides which show how the HTC One X is configured. Note that the Flex Cable is behind the motherboard and quite awkward to get off. I would post a couple of links but as a new member I'm not allowed! PM me and I'm happy to share some helpful links though.
You'll know quickly if this has worked. When connecting your phone it will no longer loop. Let it charge for a little while, then power on and hope for the best. If the Flex Cable was the problem your phone will reboot, and you will be able to use it and get your data off.
Note that water damage can have long lasting effects on a mobile phone. Whilst this may solve the problem for a while, it's entirely possible your phone will fail at some point down the line. Prepare for that and make sure you back up accordingly. The above advice may give you a lifeline in getting data off your phone, though, and being able to use it for a little longer. I know that when I was looking around the net I only found this advice by chance, and I think it was on a non-phone related forum. This advice may exist on the forum somewhere but if so it isn't so easy to find. I hope somebody may come across this topic when trying to fix their water damaged phone and find it is the solution.
Good luck!
Click to expand...
Click to collapse
Thank you very much for typing this out! My Google Pixel OG (2016), which was made by HTC, experienced the exact same problem. I have just fixed it by replacing the power flex cable like you suggested.
lazinase said:
Thank you very much for typing this out! My Google Pixel OG (2016), which was made by HTC, experienced the exact same problem. I have just fixed it by replacing the power flex cable like you suggested.
Click to expand...
Click to collapse
I was surprised to get a notification for this old thread! I'm glad this worked for you. I had no idea HTC used the same design for the original Pixel.