Found a working root for 4.6.1 - Amazon Fire Phone

Greetings!
I was successfully able to root my US unlocked Fire Phone (on 4.6.1) by installing and running KingRoot 4.0!
KingRoot appears to work on other 4th gen Amazon devices as well!
http://forum.xda-developers.com/kindle-fire-hdx/general/to-root-4th-gen-amazon-device-t3104853
One caveat:
KingRoot installs KingUser as its superuser app, and KingUser appears to prevent the su binary from being overwritten.
Because of this, I have not yet been able to replace KingUser with SuperSU or similar.
Hopefully someone more knowledgeable can resolve this, but until then
I've opted to install the Xposed Framework and LightningWall module in order to block KingUser's network activity.
najoor has found a way to replace KingUser via adb:
najoor said:
Instructions for replacing Kinguser with SuperSU are posted in the general forum:
http://forum.xda-developers.com/fire-phone/general/root-fire-phone-supersu-t3105546
Click to expand...
Click to collapse
Also, hydromän pointed out that HDXPosed is working to enable widgets and block potential updates. Awesome!
hydromän said:
How to Block now Amazon Updates?
Fixed. Using xposed with hdxmodules. Now working all Launchers with Widgets and Updates Are disabled
http://forum.xda-developers.com/showthread.php?t=2618158
Click to expand...
Click to collapse

Granted! Root working!

z64 said:
Greetings!
I was successfully able to root my US unlocked Fire Phone (on 4.6.1) by installing and running KingRoot 4.0!
Everything seems to be working, however, I am not sure how safe KingRoot is actually.
KingRoot installs KingUser as its superuser app, and KingUser appears to prevent the su binary from being overwritten.
Because of this, I have not yet been able to replace KingUser with SuperSU or similar.
Maybe someone more experienced than myself could take a look at it.
Other than that, seems great.
Hope this bit of news helps!
Click to expand...
Click to collapse
Thanks z64 for the information about a working root for 4.6.1 (US Unlocked GSM) Fire Phone.
I would like to know if KingRoot 4.0 is really safe to use, and if will make a FULL or a PARTIAL root to the Amazon Fire Phone?
I also would like to know if after rooting, you will be able to go backward and UnRoot later the Fire Phone, to the default and normal original state?

z64 said:
Greetings!
I was successfully able to root my US unlocked Fire Phone (on 4.6.1) by installing and running KingRoot 4.0!
Everything seems to be working, however, I am not sure how safe KingRoot is actually.
KingRoot installs KingUser as its superuser app, and KingUser appears to prevent the su binary from being overwritten.
Because of this, I have not yet been able to replace KingUser with SuperSU or similar.
Maybe someone more experienced than myself could take a look at it.
Other than that, seems great.
Hope this bit of news helps!
Click to expand...
Click to collapse
Is KingRoot a PC based program or a APK file? I'm Google searching now, just wondering which you used.

http://androidxda.com/download-kingroot-application
Choose 4.0

does this survive a reboot? that would be great news =)

After rebooting root checker report" ROOT" but you are right superSU is not working actualy it got installed but the SU binary upgrade failed

Can I go backward and UnRoot later the FirePhone to Default/Normal Original State??
Please, can someone that has already Rooted their Fire-Phone, if after rooting would be able to go backward and UnRoot later the Fire Phone, to the default and normal original state?

ulises.rodriguez said:
Thanks z64 for the information about a working root for 4.6.1 (US Unlocked GSM) Fire Phone.
I would like to know if KingRoot 4.0 is really safe to use, and if will make a FULL or a PARTIAL root to the Amazon Fire Phone?
I also would like to know if after rooting, you will be able to go backward and UnRoot later the Fire Phone, to the default and normal original state?
Click to expand...
Click to collapse
I'm not sure what qualifies as a full or partial root; the bootloader is still locked, so no custom recovery or custom roms.
It is possible to unroot using the included KingUser app.
You have to uncheck "Backup Root permission" first to completely unroot it.
(Still haven't figured out how to replace KingUser with SuperSU while it's rooted.)
Viperise152 said:
Is KingRoot a PC based program or a APK file? I'm Google searching now, just wondering which you used.
Click to expand...
Click to collapse
I used the latest KingRoot 4 apk from kingroot.net/down
"KingRoot-4.0.0.233-release-201505071219_105001.apk"
drdoomgod said:
does this survive a reboot? that would be great news =)
Click to expand...
Click to collapse
It does survive reboot!
I just installed the Xposed Framework with LightningWall to control net access.

How to Block now Amazon Updates?
Fixed. Using xposed with hdxmodules. Now working all Launchers with Widgets and Updates Are disabled
http://forum.xda-developers.com/showthread.php?t=2618158

works !

Failed for me. Wouldn't install.
EDIT: Got it working!!
Sent from my SD4930UR using XDA Free mobile app

The question is what can we do with it now? Can we get rid of the lock screen and install a new settings apk??

TheDynamo said:
The question is what can we do with it now? Can we get rid of the lock screen and install a new settings apk??
Click to expand...
Click to collapse
Xposed framework is the first thing I did

Hi, i have the xposed framwork installed but not sure what to do with it lol

Instructions for replacing Kinguser with SuperSU are posted in the general forum:
http://forum.xda-developers.com/fire-phone/general/root-fire-phone-supersu-t3105546

Not sure why - but after following instruction (after rooting etc) tried to follow the guide for making phone look like normal android and thats when all hell broke loose on my phone. Unresponsive bottom button, wiget's not loading, super su showing nothing then refreshing a while later showing apps in there etc.
Kinda killed my phone so going to factory reset and start again.

This is great! I got the now launcher to work, although I'm not exactly sure how. I tried the supersu replacement and only made it to steps 6 and 7 mostly because I couldn't understand what exactly I was supposed to do, so step 8 didn't work and I'm still using the kingsu. I then d/l the now launcher and the google (search) apps, tried to run it a couple of times with no luck. Then force stopped the home app, restarted, and I was given the choice to use the now launcher.

Its easy. If u have root, convert Google Now Launcher and Google Search with Titanium Backup to a System App... And you can Choose Google Now Launcher.

This is great. I was able to fix my play store/services issues by changing my build.prop to nexus 5 after rooting. Awesome!

Related

[Q] Kindle Fire 6.3 - Is it possible to sideload google market?

I have rooted my fire before using the method from this thread here. So I realized the main reason I wanted to root it was to get the marketplace. Now I know with 6.2.2 you could use "Superoneclick" then after installing the marketplace and changing permissions you could then use SOC(superoneclick) to "Unroot" the device and yet still keep the google market.
My question is, using the KF Utility for 6.3 by Teamwin, can you succesfully unroot the device and still keep the market like you could with 6.2 or has this ability been broken. As you can tell I have done some research and to no avail have found anyone saying how to unroot a 6.3 KF and yet still keep google market. Also, if this is possible is Google Play also possible and perhaps Google Books
Thanks (sorry if this is answered somewhere I did a search on the forum and didn't find anything to these specific items)
NOTE: I do know you can sideload apps but I heard sideloading the market is next to impossible without first rooting the device.
Scizzer85 said:
I have rooted my fire before using the method from this thread here. So I realized the main reason I wanted to root it was to get the marketplace. Now I know with 6.2.2 you could use "Superoneclick" then after installing the marketplace and changing permissions you could then use SOC(superoneclick) to "Unroot" the device and yet still keep the google market.
My question is, using the KF Utility for 6.3 by Teamwin, can you succesfully unroot the device and still keep the market like you could with 6.2 or has this ability been broken. As you can tell I have done some research and to no avail have found anyone saying how to unroot a 6.3 KF and yet still keep google market. Also, if this is possible is Google Play also possible and perhaps Google Books
Thanks (sorry if this is answered somewhere I did a search on the forum and didn't find anything to these specific items)
NOTE: I do know you can sideload apps but I heard sideloading the market is next to impossible without first rooting the device.
Click to expand...
Click to collapse
just use the utility you used to root KFU and you can load the google apps with it
DJLamontagneIII said:
just use the utility you used to root KFU and you can load the google apps with it
Click to expand...
Click to collapse
I understand that. I am trying to have the Google/Android Market be on the unrooted KF 6.3 OS. I would post the article but I don't have enough posts yet lol. The article is on Lilputing though. The article title is "How to sideload apps (even the Android Market) on the Amazon Kindle Fire". They are using SuperOneClick (which apparently doesn't work with 6.3) and in using SOC they quickly root the device, install the things they want, then unroot using SOC and keep everything.
My question is, is this possible on 6.3 using KFU or is SuperOneClick now supported for 6.3...
Yes you can. Root with KFU. Side load the market (google play) as a system app along with the Google framework and once every thing works download OTARootkeeper and install.
You can then unroot an re-root at will.
Sent from my Kindle Fire using Tapatalk 2
bfayer said:
Yes you can. Root with KFU. Side load the market (google play) as a system app along with the Google framework and once every thing works download OTARootkeeper and install.
You can then unroot an re-root at will.
Sent from my Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
Ok. Thanks. I have heard of OTARootkeeper but thought it just mimicked a Root/Unroot device. I didn't know if that would work with 6.3. I am surprised there isn't an article out there discussing my specific question. I thought it would be a common thing to ask. Thank you though I will give that a try.
Edit: I haven't done this just yet to test but my end goal was to have the KF unrooted and still have access to the android market. Using OTARk makes it seem like if I want the android market I just "quick root" it back to get it. I may be misunderstood what "root" really means when it comes to the KF.
Here is a better way of explaining.
1. Download Google play store and Googleservicesframework. Apk
2. Move the Google play store to system/apps
3. Install Googleservicesframework apk like a normal application.
4. Reboot your device
5. The play store should work. Now you may unroot your device.
Kindle Fire running CM9 Reloaded
New developer, working on my own custom rom
Daevionne said:
Here is a better way of explaining.
1. Download Google play store and Googleservicesframework. Apk
2. Move the Google play store to system/apps
3. Install Googleservicesframework apk like a normal application.
4. Reboot your device
5. The play store should work. Now you may unroot your device.
Kindle Fire running CM9 Reloaded
New developer, working on my own custom rom
Click to expand...
Click to collapse
Thanks for all the help and clarifying. One last question. To unroot do you suggest using OTAKroot or is there a way to make a more "solid" unroot and yet still keep the play store? Again thanks for quick helpful responses everyone.
I suggest OTA root keeper. Its the only way I know to unroot your device. If you like the answer I gave you hit the "thanks" button
Kindle Fire running KANG CM9
New developer, working on my own custom rom
Daevionne said:
I suggest OTA root keeper. Its the only way I know to unroot your device. If you like the answer I gave you hit the "thanks" button
Kindle Fire running KANG CM9
New developer, working on my own custom rom
Click to expand...
Click to collapse
Ok so I have everything done however it's not the exact result I was hoping/expecting. I was wanting the main stock look of the KF but with the market installed and working. Right now I have unrooted but am having trouble figuring out how to get back to my Amazon KF stock launcher and my Amazon Prime videos.
Edit: I can't figure out how to get to my Amazon bookshelf anymore. I have the Amazon App store and Kindle App from the market but how do I get back to the amazon bookshelf?
Scizzer85 said:
Ok so I have everything done however it's not the exact result I was hoping/expecting. I was wanting the main stock look of the KF but with the market installed and working. Right now I have unrooted but am having trouble figuring out how to get back to my Amazon KF stock launcher and my Amazon Prime videos.
Edit: I can't figure out how to get to my Amazon bookshelf anymore. I have the Amazon App store and Kindle App from the market but how do I get back to the amazon bookshelf?
Click to expand...
Click to collapse
You have to clarify a bit more for me...
1. Is the play store up and working?
2. Did you download any custom launchers?
3. Did you download any custom lockscreens?
4. The steps you took were root, installed market, unroot, correct ?
Kindle Fire running KANG CM9
New developer, working on my own custom rom
Daevionne said:
You have to clarify a bit more for me...
1. Is the play store up and working?
2. Did you download any custom launchers?
3. Did you download any custom lockscreens?
4. The steps you took were root, installed market, unroot, correct ?
Kindle Fire running KANG CM9
New developer, working on my own custom rom
Click to expand...
Click to collapse
Play store is working. I tried Go Launcher to see if I could get the Default Launcher through there. No lockscreens. It is currently with CM7 unrooted via OTA Rootkeeper. But when I rebooted after unrooting it I had the CM7 android interface still. Not KF default interface.
This video is what I essentially was trying to accomplish. He has the Launcher.apk but it seems to not work on CM7 or at least not 6.3. Right now, I can't get to the instant video screen or bookshelf at all...
http://www.youtube.com/watch?v=8Q655g1RHgU
This video was from November, that was before 6.2 :/ I think this method is outdated... sorry
Kindle Fire running KANG CM9
New developer, working on my own custom rom
Scizzer85 said:
Play store is working. I tried Go Launcher to see if I could get the Default Launcher through there. No lockscreens. It is currently with CM7 unrooted via OTA Rootkeeper. But when I rebooted after unrooting it I had the CM7 android interface still. Not KF default interface.
Click to expand...
Click to collapse
So you not only rooted but you installed a custom ROM.
That's a whole other story.
To get what you want you need to restore your original ROM from backup. Reroot with KFU. Side load the framework and market and unroot with OTA rootkeeper. You should have made a backup from restore before you installed CM7.
Do not repeat do not upgrade the kindle reader from the market if you wish to keep using the original launcher.
It would help if we knew why you wanted to be un rooted.
Rooting only gives you access to your file system. The only custom softwear you need is superuser. Unrooting with OTA rootkeeper just makes a backup of SU and then removes it. You can then watch movies etc. But when you need root back you just restore your SU backup in OTA rootkeeper.
Why do you need to permanantly unroot ?
Sent from my Kindle Fire using Tapatalk 2
Since you are loading ROMs, I'd recommend MoDaCo rom. It's the closest to stock with the play store already added.
http://forum.xda-developers.com/showthread.php?t=1439916
Another option
Keep stock, root, add SU, (and add go launcher if you want) Just add a shortcut to the kindle launcher. Unroot. Then you can switch back and forth. Simplest way.
I sideloaded the market app with file expert when I was happy with stock.
Though I don't know why you insist on unrooting.
Cheshire.Love said:
Since you are loading ROMs, I'd recommend MoDaCo rom. It's the closest to stock with the play store already added.
http://forum.xda-developers.com/showthread.php?t=1439916
Another option
Keep stock, root, add SU, (and add go launcher if you want) Just add a shortcut to the kindle launcher. Unroot. Then you can switch back and forth. Simplest way.
I sideloaded the market app with file expert when I was happy with stock.
Though I don't know why you insist on unrooting.
Click to expand...
Click to collapse
I guess I misunderstood what rooting really meant. So I can use KFU to root the device but after doing so DO NOT install CM7 and instead just sideload google market and once installed just use it to install any apps but at the same time since CM7 wouldn't be installed I would be seeing the basic interface from KF as it is stock?
Scizzer85 said:
I guess I misunderstood what rooting really meant. So I can use KFU to root the device but after doing so DO NOT install CM7 and instead just sideload google market and once installed just use it to install any apps but at the same time since CM7 wouldn't be installed I would be seeing the basic interface from KF as it is stock?
Click to expand...
Click to collapse
Correct. You do not need to do anything after you root unless you want to. Everything on your KF will stay stock. I would recommend you flash a recovery (I prefer CWM) that way you can reload your backup if you need to. Whst I would do is root install firefirefire and CWM. Reboot to CWM and backup everything. Then load the framework and market. When you root make sure SU is properly installed before you move ahead. You will need a copy of root explorer or another file manager to make this all happen with the least pain.
Remember if you keep the stock launcher DO NOT update the kindle reader from the market. The stock KF reader is not the same as the market version but the market will see it as an old version and try to get you to update it.
I run both the stock launcher and go launcher. I keep a shortcut to the stock launcher on my go launcher dock and a shortcut to go launcher on my stock dock. I toggle between them as needed.
Sent from my Kindle Fire using Tapatalk 2
bfayer said:
Correct. You do not need to do anything after you root unless you want to. Everything on your KF will stay stock. I would recommend you flash a recovery (I prefer CWM) that way you can reload your backup if you need to. Whst I would do is root install firefirefire and CWM. Reboot to CWM and backup everything. Then load the framework and market. When you root make sure SU is properly installed before you move ahead. You will need a copy of root explorer or another file manager to make this all happen with the least pain.
Remember if you keep the stock launcher DO NOT update the kindle reader from the market. The stock KF reader is not the same as the market version but the market will see it as an old version and try to get you to update it.
I run both the stock launcher and go launcher. I keep a shortcut to the stock launcher on my go launcher dock and a shortcut to go launcher on my stock dock. I toggle between them as needed.
Sent from my Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
I followed everything except CWM. Is that something similar to KFU as far as how to root it or is that like the TWRP that I had before for recovery? And thanks for explaining all this.
It is like TWRP. A recovery program. I like it much better. But it does the same thing.
Sent from my Galaxy Nexus using Tapatalk 2
Ok. After some tweaking I now have reset the device back to factory settings. Re-rooted, used CWM for backup/recovery. I used the MoDaCo and successfully installed the Google Play store. Installed OTA rootkeeper and used it to "temp unroot" my device. I was hoping this would give me access to the "Watch Now" on the Amazon Video but it still is greyed out. Truth be told, I got the month free of Prime for getting the KF but I probably won't continue to pay. Regardless, is that the only feature that I can't get with the rooted device? If so, then I am to say, happy for sure.

Kingroot Firestick question OS 5.0.5 (Purify?)

I see different post regarding success rooting with Kingroot but are you clicking Purify 'Try it' button when you slide the screen up? I don't see a way around it and I assume you may be able to uninstall it afterward but it seems even more sketchy forcing you to install as part of the root process. It also seems to require a bluetooth mouse on the fire stick as I couldn't get the screen to slide up using a gamepad, keyboard, or the default remote. I am wondering if I downloaded a version that isn't legit?
looks like the legit version
I used the version you're describing.
I didn't know any way around 'purify' and clicked the 'Try it'-Button with a mouse.
For me it's no big deal, because you can use the in kingroot integrated bloatware-uninstall-tool (irony? :laugh: ) to remove purify after a successful root.
The lack of an option to control the app with the remote and the missing landscape mode (especially of the root-granting-prompts) are more annoying. Maybe i'm trying any of the guides out there to replace it with SuperSu.
The thread on XDA has a version of 4.1 attached, I haven't been able to test it as I don't have 5.0.5 yet on the firetv stick, but it looks like that one doesn't need a mouse from other posts:
http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
it does connect to the internet to download the root for your device on the fly, that is a large thread on XDA though if you want to learn more about kingroot itself
Is it safe to uninstall? The purify app?
I think so. I didn't run into problems so far.
But the next time you start Kingroot manually (NOT the superuser prompts!), it checks for purify and you have to 'try it' / install it again.
Sent from my Nexus 5 using Tapatalk
Hold on so fire stick can be rooted now?
Sent from my iPhone using Tapatalk
SilentBot said:
I think so. I didn't run into problems so far.
But the next time you start Kingroot manually (NOT the superuser prompts!), it checks for purify and you have to 'try it' / install it again.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Could you not install Super Su for the prompt?
I know there is an app called Super Sume Pro which claims to uninstall the king root & purify & leave Super Su in its place but some have been left with problems booting afterwards & some have had success with it
No I'm not!
I'm a bit careful at the moment... Afraid to brick it w/o recovery.
patt2k said:
Hold on so fire stick can be rooted now?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes once on software 5.0.5 or OS5, with Kingroot (I believe version 4.1)
Sent from my SM-G900F using Tapatalk
deanr1977 said:
Yes once on software 5.0.5 or OS5, with Kingroot (I believe version 4.1)
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
I have 3 fire sticks on beta firmware how do I put them on 5.0.5?
Sent from my iPhone using Tapatalk
I rooted using the latest king root from their site. I had a bluetooth mouse and keyboard to swipe but it was invisible in some parts of the app. I also noticed it was having trouble with landscape mode but I had that problem solved because I already had this app installed which does forced landscape mode ( http://forum.xda-developers.com/showthread.php?t=2331514 )
I was tempted to use the supersu-me app from the playstore but I also read in the app descriptions how some people had issues and were bricked. I did install the supsu.apk file and it was granted root. I installed flashfire but it would not run because it requires supersu. (probably because the supersu binaries were not installed) I'm gonna sit and wait a little bit cause I figure it's just a matter of time till we get a full process. I did disable ota updates. and the amazon keyboard which was nice. along with adaway. Next will probably be samba and ssh. I wish we could get connectbot(closes immediately on connection attempt) working with proxy droid (from here http://forum.xda-developers.com/showthread.php?t=2505762 ) or something similar so we could use ssh tunneling as a vpn client. I definitely prefer that over ssh tunneling app cause it proxy's all your traffic. the latest orbot.apk (tor for android) has some nice new features were you can pick you country exit node easily. A comment off topic, I will not be updating my already rooted firetvgen1. I prefer the stablity and the compatability of what is already there and defintely dont want fireos5. I am not so happy with my rooted/twrp firetvgen2 not for what the devs have done of course. it's just newer isn't always better. again dev's please don't take this the wrong way. I just found my ftv1 more compatible with more apps.
patt2k said:
I have 3 fire sticks on beta firmware how do I put them on 5.0.5?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
You just need to leave them plugged in & wait mate, there running the new update now so we will all have to just wait till it's here
Sent from my SM-G900F using Tapatalk
What I'd suggest to everyone is achieve root asap and resist the temptation to fiddle too much!
Remember its harder to 'restore/unbrick' without recovery (if rbox does achieve it) so don't do anything risky until we have a way of restoring. Especially if its your 'main' Kodi source.
Once we have recovery and a pre-rooted ROM then the goodness will come without the risk of a brick.
I nearly bricked mine this weekend by freezing FTVLauncher and setting Kodi as permanent Home, Kodi didn't take to it and I had no way revert teh default launcher change as its not available in Settings.
What we need is some cleaver chap to compile the ASOP Settings.apk for the stick with all the links to the right places.
Dude360 said:
What I'd suggest to everyone is achieve root asap and resist the temptation to fiddle too much!
Remember its harder to 'restore/unbrick' without recovery (if rbox does achieve it) so don't do anything risky until we have a way of restoring. Especially if its your 'main' Kodi source.
Once we have recovery and a pre-rooted ROM then the goodness will come without the risk of a brick.
I nearly bricked mine this weekend by freezing FTVLauncher and setting Kodi as permanent Home, Kodi didn't take to it and I had no way revert teh default launcher change as its not available in Settings.
What we need is some cleaver chap to compile the ASOP Settings.apk for the stick with all the links to the right places.
Click to expand...
Click to collapse
Good advice mate, that's what I plan on doing.... Root/block updates then wait
Sent from my SM-G900F using Tapatalk
rp201 said:
I rooted using the latest king root from their site. I had a bluetooth mouse and keyboard to swipe but it was invisible in some parts of the app. I also noticed it was having trouble with landscape mode but I had that problem solved because I already had this app installed which does forced landscape mode ( http://forum.xda-developers.com/showthread.php?t=2331514 )
I was tempted to use the supersu-me app from the playstore but I also read in the app descriptions how some people had issues and were bricked. I did install the supsu.apk file and it was granted root. I installed flashfire but it would not run because it requires supersu. (probably because the supersu binaries were not installed) I'm gonna sit and wait a little bit cause I figure it's just a matter of time till we get a full process. I did disable ota updates. and the amazon keyboard which was nice. along with adaway. Next will probably be samba and ssh. I wish we could get connectbot(closes immediately on connection attempt) working with proxy droid (from here http://forum.xda-developers.com/showthread.php?t=2505762 ) or something similar so we could use ssh tunneling as a vpn client. I definitely prefer that over ssh tunneling app cause it proxy's all your traffic. the latest orbot.apk (tor for android) has some nice new features were you can pick you country exit node easily. A comment off topic, I will not be updating my already rooted firetvgen1. I prefer the stablity and the compatability of what is already there and defintely dont want fireos5. I am not so happy with my rooted/twrp firetvgen2 not for what the devs have done of course. it's just newer isn't always better. again dev's please don't take this the wrong way. I just found my ftv1 more compatible with more apps.
Click to expand...
Click to collapse
be careful with samba, the system tools of "adbFire" and autostart modifications in general!
I almost bricked mine and ended temporarily in a bootloop... Luckily there was still a 10-30 sec window in each loop to connect with ADB and undo the changes before fire os crashed and the FTV restarted.
deanr1977 said:
You just need to leave them plugged in & wait mate, there running the new update now so we will all have to just wait till it's here
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Yes sir that's what's happening it's on 24/7 and I try to check for update from time to time.
Sent from my iPhone using Tapatalk
Just posting that I successfully rooted my FireTV version 1 with KingRoot 4.1. At first it wouldn't connect to my network, so I removed the hard wire and connected my FireTV via WiFi, and KingRoot worked. I disabled future updates and it worked.
I successfully rooted my FireTv stick v1 with KingRoot 4.8. I just blocked updates for now.
bula1ca said:
I successfully rooted my FireTv stick v1 with KingRoot 4.8. I just blocked updates for now.
Click to expand...
Click to collapse
How are you guys blocking updates once rooted?
Sent from my LGLS991 using Tapatalk
I used:
adb shell pm hide com.amazon.device.software.ota
It should work even without root.
Sent from my Nexus 5 using Tapatalk

Can't launch SuperSU on Amazon Fire Tv

Hey, just wondering if anyone can help, for the past week I've been trying to fix a problem with my Fire tv and have tried various methods to fix this issue. Basically I use Sloane 5.0.5 r4 ROM on my aftv 2, it comes with super su and the root does work as superuser requests pop up to allow or deny. However super su doesn't appear in apps (the GUI management tool) when installed (tried various versions of supersu from 2.4 to 2.7) and I try to launch it, it just takes me back to the home screen. From googling I can see a few others have a similar problem, some people suggesting kingroot(not keen to use that as it doesn't give me the same options as super su) some suggesting rbox will make an update to sort the problem. Although not something I know is definite. The super su works and it's binaries as suggested earlier but the gui tool is nowhere to be seen. Even tried changing sloanes rom and replacing it with another supersu version but this hasn't worked. Just to add more details im running TWRP recovery also!
Thanks.
Aaron-Marcus said:
Hey, just wondering if anyone can help, for the past week I've been trying to fix a problem with my Fire tv and have tried various methods to fix this issue. Basically I use Sloane 5.0.5 r4 ROM on my aftv 2, it comes with super su and the root does work as superuser requests pop up to allow or deny. However super su doesn't appear in apps (the GUI management tool) when installed (tried various versions of supersu from 2.4 to 2.7) and I try to launch it, it just takes me back to the home screen. From googling I can see a few others have a similar problem, some people suggesting kingroot(not keen to use that as it doesn't give me the same options as super su) some suggesting rbox will make an update to sort the problem. Although not something I know is definite. The super su works and it's binaries as suggested earlier but the gui tool is nowhere to be seen. Even tried changing sloanes rom and replacing it with another supersu version but this hasn't worked. Just to add more details im running TWRP recovery also!
Thanks.
Click to expand...
Click to collapse
It's something Amazon does to Android and SuperSU being a system app. I noticed the same problem with the Play Store. You might be able to launch it while in an alternative launcher and/or using adb shell.
Run a adb shell and fire up this one
pm path eu.chainfire.supersu
Just to check the installation path
Hey rbox! Many thanks for your reply, and well done on your effort with this rom, can't fault it except for this minor issue. Been tearing my hair out trying to figure out exactly why it all looks fine and well but won't launch. I was thinking of trying to install play store using xposed, was looking at a guide online and wondered if it would open through play store. Didn't realise I could use another launcher with your rom though. Do you know if there's others you know that understands amazon devices to come up with a fix, update etc? seems like you're the only one to make a rom so far for the aftv so I'm guessing it'll take time until everyone fully understands amazon devices and apply similar Android based roms. Thanks for your advice.
Here's what the path came back as, I did notice there's two different locations for supersu though.
correct me if i'm wrong but as far as i know the supersu (the one that you just found) is the su binary but the GUI (which is responsible for the grant notification) is here: /system/app/Superuser.apk
I'm not 100% sure about it, so maybe someone could light up the dark
once sloane-5.0.5-rooted_r4 is flasheed can we update SU from play store?
Sure but you don't have to. Just take that one http://apps.evozi.com/apk-downloader/?id=eu.chainfire.supersu
Sent from my Nexus 6 using XDA-Developers mobile app
Cool thks but i purchased the pro and thought i could update without breaking anything on the fire
ok i updateed to pro since it was allready purchased, all went well but dont know what it does more since i cant open the app loll, but it works, thats what counts
Habs69M said:
ok i updateed to pro since it was allready purchased, all went well but dont know what it does more since i cant open the app loll, but it works, thats what counts
Click to expand...
Click to collapse
My experience is with Firestick.
1) On main Amazon screen, go to the App line and look accros there.
2) Connect Wukong Remote https://play.google.com/store/apps/details?id=com.wukongtv.wkremote.client.en and you'll see the Apps selection at bottom.
I like to go into Supersu settings and the default to "Grant" and I like to turn off notifications.
king200 said:
My experience is with Firestick.
1) On main Amazon screen, go to the App line and look accros there.
2) Connect Wukong Remote https://play.google.com/store/apps/details?id=com.wukongtv.wkremote.client.en and you'll see the Apps selection at bottom.
I like to go into Supersu settings and the default to "Grant" and I like to turn off notifications.
Click to expand...
Click to collapse
thks cool app but i still cant open super su , dont know after reading some that you even can
Arghhhh. Think I've soft bricked my fire tv or worse! I was re flashing the rom and was cleaning the data before hand, I must of wiped the system and now I'm only seeing the amazon white logo when i turn it on... Tried to install recovery again since I can't even get into recovery but when going through preloader it eventually says error can't find target file. Tried to use fast boot but fire tv isn't connecting to try and install recovery etc that way! You guys got any ideas or have I totally broken the device? ???
Keep calm buddy, als long as the preloader is still working everything is possible. Did you try to Flash TWRP again?
http://forum.xda-developers.com/fire-tv/development/firetv-2-unbrick-image-t3313349
Thank you so much! It saved the day! never will i ever be such a n00b and delete the entire system again. Also big thankyou RBOX for your guide and files to unbrick, they worked a dream. Everything is installed now, hopefully in near future someone manages to get SuperSu opening in the GUI lol im just happy I can actually use my fire tv again though!

[Q] Fire Phone: SuperSU-me, Xposed Framework and other Issues

Hi,
I just got a fire phone and I'm facing multiple issues. It updated to 4.6.6.1 once i started it. Now I want it to act like a normal android phone so I installed google now launcher.
Next thing i wanted to do is to customize the laucher. So I did research how to root it. Did it with kingroot and afterwards followed various instructions to change to superSu. Non of them worked. Neither via adb nor SuperSU me nor the terminal version. only rooted when on kingsroot. SuperSU binaries also would never succesfuly update. Anyways.
So after I got the root, I wanted to install Xposed Framework to finally customize the launcher. Now xposed is saying, that it is not (yet) compatible wit the ANdorid SDK Version 19 or my Prozessor architecture. (armeabi-v7a)
I'm running the phone on german language. Don't know what to do anymore with both. SUpersu and Xposed. Appreciate any help.
So you already bought Super-Sume-Pro? Good, because removing / replacing Kingroot was possible even with the (early) free version of Super-Sume (9.1.6).
Download this old version* of Kinguser.
Yes, like always, it's classified as a virus / exploit / PUP, because it uses very aggressive methods of achieving root.
"But Bingo, this is only Kinguser, I need Kingroot."
No you don't. I used this combo many times, it always worked, from the latest version down to Fire OS 4.6.1 when I first tried it.
Uninstall your current version of Kingroot / Kinguser and remove the leftover folders from the internal storage.
Install the old version (disable auto update within in the app, it can be quite annoying), let it "achieve" root, disable WiFi if you want.
Run Super-Sume. It will have no problem replacing Kinguser with 2 steps.
Download this compatible version of the Xposed Installer.
Install framework, etc. You know the drill.
For BusyBox, I'd recommend either Stericson's version or Meefik's.
I tested one of my devices with 4.6.6.1 and the above mentioned customizations (mainly to enjoy microG on Fire OS ^^), so I can say it definitely works.
* Had to use OCH, because the "good guys" like Dropbox and Google Drive won't allow hosting / linking this file, since it's a bad azz virüs.
I always found W0lfdroid's script to be quite effective and efficient in removing Kingroot:
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html
Plonko said:
I always found W0lfdroid's script to be quite effective and efficient in removing Kingroot.
Click to expand...
Click to collapse
Ugh, so many letters, I'm so confused, please... no more, let's stay with "dumb it down". This saves time so I can roll around in my own feces. :victory:
Plonko said:
I always found W0lfdroid's script to be quite effective and efficient in removing Kingroot:
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html
Click to expand...
Click to collapse
W0lfdorid was one of the versions i tried. no success. I can start the script but then it says failure and every single steps fails. I finally made it to the supersu installed, but it wont update the binaries. installation always failed
coolni said:
W0lfdorid was one of the versions i tried. no success. I can start the script but then it says failure and every single steps fails. I finally made it to the supersu installed, but it wont update the binaries. installation always failed
Click to expand...
Click to collapse
Hmmmm...I don't know what to say. I just used it today after returning a phone to stock Fire OS for my niece. The only thing I can think of is I'm using an earlier version of Kingroot? I'm using KingRoot-4.1.0.524.apk if that matters. I can try to PM it to you, but I'm not sure it will work because, as Bingo mentioned, it is seen as a virus by most servers.
Yup, I also used the oldest version I had on my PC, this way I can avoid the cat and mouse game between Kingroot and Super-Sume ^^ ... well, for the Fire Phone and some "older" KitKat devices that is.
But since 'coolni' popped his Fire Phone cherry just recently, he naturally went for a current version of Kingroot and he's also on the latest Fire OS release; thought process = better bring the big guns so that root is guaranteed.
Bingo Bronson said:
Yup, I also used the oldest version I had on my PC, this way I can avoid the cat and mouse game between Kingroot and Super-Sume ^^ ... well, for the Fire Phone and some "older" KitKat devices that is.
But since 'coolni' popped his Fire Phone cherry just recently, he naturally went for a current version of Kingroot and he's also on the latest Fire OS release; thought process = better bring the big guns so that root is guaranteed.
Click to expand...
Click to collapse
can anybody help to root 4.6.6.1 ?
Kingroot 4.0.0.233 from zip file did not work on my phone with 4.6.6.1.
Having problems on custom recovery
Hello sir I am using amazon 4.6.6.1 almost 1 year ago I have backed up my custom recovery from flashify and deleted accidentally now I need that but can't do anything I have tried most things to get back but can't and also can't root my phone with king root I am installing it but it's saying that app not installed any solution please my email is [email protected]

Warning sign in notification telling me KingRoot is bad?

Suddenly I get a warning telling me to uninstall king root 4.9.6. I've been running same fulmics 6 for months and I just discovered the warning sign today.
What is this? Is there any potential danger to keeping king root? If I uninstall king root I will loose root privileges, yes?
joppy said:
Suddenly I get a warning telling me to uninstall king root 4.9.6. I've been running same fulmics 6 for months and I just discovered the warning sign today.
What is this? Is there any potential danger to keeping king root? If I uninstall king root I will loose root privileges, yes?
Click to expand...
Click to collapse
Fulmics has SuperSu installed as System application,there was no need to install KingRoot..
Also if you have two Root apps (same like SuperSu),then your phone isn't going to have a good time..
So delete KingRoot and stay with SuperSu.
Greetings.
Thx. I used king root to first get root access so I could install fulmics. Iirc I found the king root from a post here on the forum, so I assumed it was safe.
I disabled king root.btw it is fulmics 6.1 I got. It seems all things good now. I feel a little paranoid, as I discovered king root is from China ?
I wonder if I should do complete install from scratch or am I safe as long as king root is not longer active?
joppy said:
Thx. I used king root to first get root access so I could install fulmics. Iirc I found the king root from a post here on the forum, so I assumed it was safe.
I disabled king root.btw it is fulmics 6.1 I got. It seems all things good now. I feel a little paranoid, as I discovered king root is from China ?
I wonder if I should do complete install from scratch or am I safe as long as king root is not longer active?
Click to expand...
Click to collapse
The best choice is to uninstall it.Because it has setted it's self as a system application.
But also i think it has an option (in-app) "Uninstall".
In addition if Kingroot is unable to uninstall by using the inapp option then try installing an app from Play store called " System app remover" and delete it from there.
If nothing works then doing a clean re-installation of the ROM would be a great option.
A Tip:Never install an other Root application while you have SuperSU.
Let's take Kingroot for an example, when you have SuperSU and install Kingroot then automatically Kingroot detects that you have an other root application and it set's it's self as system app.
System app remover did the trick. Removed the King Root app. Result is o/c that adaway is no longer working. So I get to play around with SuperSU now. As I am new to SuperSU I am not sure how to get the correct settings. Should I make SuperSU a system app? Or set permanent full root?
Btw, I never had any problems running King Root. It was even a very nice way to charge the phone because King Root made charging go faster.
I've been thinking about the warning sign I got, and could it possible be a generic warning because King Root had root access? Meaning I would get the same warning with other apps with root access?
It seems strange that King Root that is mentioned som many times here on XDA should be crapware. Surely some smart people would have noticed and made posts about it? I am thinking maybe I panic'd and removed King Root prematurely?
Darn it. SuperSU won't run or allow me to set root access to apps. So no TWRP does not work, adaway does not work, root checker confirms I don't have root anymore and to make things worse, SuperSU says I need to upgrade, so I downloaded the latest version as a zip file to install from TWRP but guess what, no more root access. I will try to boot manually into TWRP and install SuperSU. Hopefully that will work.
And reading SuperSU thread it clearly says I must have ROOT prioer to install SuperSU.
Is there are fulmics setting somewhere I have overlooked? Can I set root from within fulmics tweaks?
Well I didn't get the SuperSU working, then I discovered that there was a newer version of KingRoot, v5.0. So for the ease of it I just installed KingRoot v5.0. As of right now, I don't have any warning signs saying Kingroot is bad news.
So unless it is a known fact that kingroot is infected by crap/malware/spyware/whatever I think I just stick to that one for now. I am used to it, I know how to work it and google didn't find any indications kingroot has been compromised . I saw a few posts about earlier version sending IMEI to china, but it seems that was v3xx. v4x and5x seems to be ok.
If this is stupid behavior and I should remove king root let me know and pls add some links or something to back it. I would hate to give a compromised app gateway into my phone but at the same time I think I was in panic mode earlier today and that my reaction was uncalled for.
joppy said:
Well I didn't get the SuperSU working, then I discovered that there was a newer version of KingRoot, v5.0. So for the ease of it I just installed KingRoot v5.0. As of right now, I don't have any warning signs saying Kingroot is bad news.
So unless it is a known fact that kingroot is infected by crap/malware/spyware/whatever I think I just stick to that one for now. I am used to it, I know how to work it and google didn't find any indications kingroot has been compromised . I saw a few posts about earlier version sending IMEI to china, but it seems that was v3xx. v4x and5x seems to be ok.
If this is stupid behavior and I should remove king root let me know and pls add some links or something to back it. I would hate to give a compromised app gateway into my phone but at the same time I think I was in panic mode earlier today and that my reaction was uncalled for.
Click to expand...
Click to collapse
Then if you are used to Kingroot just uninstall SuperSu(Install the system app remover from Play store ((the first app that appears)).
Because as i mentioned before if you have two Root applications your phone isn't going to have a good time.
(That may be the problem your phone went to Panic Mode)
If you have Kernel Panic mode problems (after unstalling SuperSU) a clean reinstall of the latest version of Fulmics ROM would be great..
PS:I don't know if Kingroot has any type of virus but I'll check if it has anything malicious.
As i checked you said that you lost root access and you took it back with Kingroot right?
Sotiris02 said:
Then if you are used to Kingroot just uninstall SuperSu(Install the system app remover from Play store ((the first app that appears)).
Because as i mentioned before if you have two Root applications your phone isn't going to have a good time.
(That may be the problem your phone went to Panic Mode)
If you have Kernel Panic mode problems (after unstalling SuperSU) a clean reinstall of the latest version of Fulmics ROM would be great..
PS:I don't know if Kingroot has any type of virus but I'll check if it has anything malicious.
As i checked you said that you lost root access and you took it back with Kingroot right?
Click to expand...
Click to collapse
Seems I am good after all. Turned out I messed up the fulmics 6.1 badly when trying to get adaway for youtube to work. So now I got fulmics 6.5. Yeah I know it is not the latest but I had slow internet connection and 6.5 was already downloaded but not yet installed so I just picked that and did a swipe, and twrp install of fulmics 6.5.
I did however install king root 5.01 again to get an easy way of getting everything else important installed that requires root.
If I don't see more warnings I think I will be fine. If I do I will take the plunge for superSU and read up on that before making the switch.
If I see those warning signs again I will try not to panic and try to keep calm

Categories

Resources