I have a S4 M919N on CM12 Nightly and my Bluetooth is acting up. It will connect to my car and disconnect by itself and when I try to go into the settings of the phone it doesn't let my turn the Bluetooth on anymore. I restart the phone and it connects again but when I make a call or play music, my phone says Bluetooth has stopped working. It used to work fine on Stock. All i've done so far is just root and flash CM12. I'm really inexperienced with this stuff so any help will greatly appreciated. Thank you in advance.
Don't know for sure, but could be a cm issue at the moment. Try reflashing fresh cm12 or latest nightly
serio22 said:
Don't know for sure, but could be a cm issue at the moment. Try reflashing fresh cm12 or latest nightly
Click to expand...
Click to collapse
I ended up flashing to stock and re flashing CM12 and it was working, but didn't get to really test it because I ended up selling it. Thanks for the help.
Related
I have CM7.1 RC. I am getting a weird issue.
When I start Wifi, it is not connecting , but if I disable cell data then wireless starts working.
Again If I turn on my data, it shuts off my wireless.
Let me know how to resolve this issues
I will really appreciate it.
Thanks.
svdabc said:
I have CM7.1 RC. I am getting a weird issue.
When I start Wifi, it is not connecting , but if I disable cell data then wireless starts working.
Again If I turn on my data, it shuts off my wireless.
Let me know how to resolve this issues
I will really appreciate it.
Thanks.
Click to expand...
Click to collapse
Interesting, have you tried reflashing CM7?
I would recommend using the newer nightlies as they are very stable.
Maybe try a non stock kernel too.
mattykinsx said:
Interesting, have you tried reflashing CM7?
I would recommend using the newer nightlies as they are very stable.
Maybe try a non stock kernel too.
Click to expand...
Click to collapse
Thanks for quick response.
I am using this rom for last two months, there was no issue till today.
Is there any other solution than reflashing, because then I need to reinstall all apps and everything.
svdabc said:
Thanks for quick response.
I am using this rom for last two months, there was no issue till today.
Is there any other solution than reflashing, because then I need to reinstall all apps and everything.
Click to expand...
Click to collapse
You would not lose your /data if you flashed an update.
You could try flashing a different kernel if you wanted though.
Tiamat, Savaged-Zen, or Godmode.
Thanks, I will try that.
svdabc said:
Thanks, I will try that.
Click to expand...
Click to collapse
Welcome, post again if you need more help.
So I just rooted my Samsung sgh t-989 the tmobile one. I put TWRP 2.5 and have Cygenmod 10.1 running. I was all excited because I have notdone this kind of stuff since middle school.
But The problem is my Bluetooth is "disabled" When i try to turn it on it just goes right off, I have no idea where to start to fix this problem. I already tried google and searching the forums but no solutions.
Which date of cm10.1 did you flash? You need to give more details. Flash a custom kernel? What's your radio you're using?
Denta87 said:
So I just rooted my Samsung sgh t-989 the tmobile one. I put TWRP 2.5 and have Cygenmod 10.1 running. I was all excited because I have notdone this kind of stuff since middle school.
But The problem is my Bluetooth is "disabled" When i try to turn it on it just goes right off, I have no idea where to start to fix this problem. I already tried google and searching the forums but no solutions.
Click to expand...
Click to collapse
I've had exactly the same problem, using the CM 10.1 RC5a.
Bluetooth will do as you described - be disabled, when clicked on, will jump to off again.
Restarting always fixes it momentarily.
If BT is on, and successfully connects to my car, and I'm able to place a call, first no one can hear me, the call is dropped, and BT shuts off to remain permanently disabled til I reboot the system.
After a reboot, its usually ok for a couple hours.
Lots of other users are having the same problem....
Denta87 said:
So I just rooted my Samsung sgh t-989 the tmobile one. I put TWRP 2.5 and have Cygenmod 10.1 running. I was all excited because I have notdone this kind of stuff since middle school.
But The problem is my Bluetooth is "disabled" When i try to turn it on it just goes right off, I have no idea where to start to fix this problem. I already tried google and searching the forums but no solutions.
Click to expand...
Click to collapse
Also, flashing this fix now, will report back:
http://forum.xda-developers.com/showthread.php?t=2174100
I wiped dalvik/cache, flashed the BT fix, fix permissions, then rebooted.
Just CM 10.1 RC5a, UVMC6 radio, I upgraded firmware using the UVMC6.aio.tar.md5 file made by Mikeyman
Hope it works - really tired of having to reboot every time i want to make a call over BT car audio...
HISTORY oforoub
aaronchili said:
Also, flashing this fix now, will report back:
http://forum.xda-developers.com/showthread.php?t=2174100
I wiped dalvik/cache, flashed the BT fix, fix permissions, then rebooted.
Just CM 10.1 RC5a, UVMC6 radio, I upgraded firmware using the UVMC6.aio.tar.md5 file made by Mikeyman
Hope it works - really tired of having to reboot every time i want to make a call over BT car audio...
Click to expand...
Click to collapse
36 hours on this and no BT crashes!
Faster connection to car audio, and call stability is much better.
Also remember after reboot to delete all devices, and re-add them.
Hi,
I've flashed PA many times before on my Nexus 4, and I was using PA 3.99 before I decided to try using CM11 (cause kitkat). Well, CM11 worked fine, but I wanted to go back to PA, however, when I tried flashing the rom, it took much longer than usual, and then when my phone finally booted up, neither the sound nor the wifi would work. I first noticed this when the phone was setting up, as the second thing a new android phone asks you to do is to turn on your wifi. My phone just said "turing on wifi" for a good five minutes until I skipped it. Once I finally finished setting the phone up, I tried turing up the sound but it wouldn't work. Of course, I can't really use my phone if the sound won't work at all, so I decided to flash CM11 again, and then everything was working properly. Since then I've tried PA and CM again, AOKP, and PAC rom, but CM is the only one that worked for my phone. The sound and wifi didn't work on any of the other three roms. If anybody could help, that'd be great!! Otherwise I'll have to stick to CM11 even though I'd like to go back to PA.
SOLUTION FOUND
For anyone with a similar issue: My problem was that I was running CM11, which uses android 4.4, so it seemed that the issue was caused by flashing to a rom that used an earlier version of android. I solved the problem by unrooting my phone and reverting back to 4.2. Then I rooted the device again and flashed PA 3.99, then everything was fine.
noahajohnson said:
Hi,
I've flashed PA many times before on my Nexus 4, and I was using PA 3.99 before I decided to try using CM11 (cause kitkat). Well, CM11 worked fine, but I wanted to go back to PA, however, when I tried flashing the rom, it took much longer than usual, and then when my phone finally booted up, neither the sound nor the wifi would work. I first noticed this when the phone was setting up, as the second thing a new android phone asks you to do is to turn on your wifi. My phone just said "turing on wifi" for a good five minutes until I skipped it. Once I finally finished setting the phone up, I tried turing up the sound but it wouldn't work. Of course, I can't really use my phone if the sound won't work at all, so I decided to flash CM11 again, and then everything was working properly. Since then I've tried PA and CM again, AOKP, and PAC rom, but CM is the only one that worked for my phone. The sound and wifi didn't work on any of the other three roms. If anybody could help, that'd be great!! Otherwise I'll have to stick to CM11 even though I'd like to go back to PA.
SOLUTION FOUND
For anyone with a similar issue: My problem was that I was running CM11, which uses android 4.4, so it seemed that the issue was caused by flashing to a rom that used an earlier version of android. I solved the problem by unrooting my phone and reverting back to 4.2. Then I rooted the device again and flashed PA 3.99, then everything was fine.
Click to expand...
Click to collapse
Thank you !!!
it's Work !
I have Arc S and CM11 on it. I don't have latest update since on latest messaging app is buggy. When i connect to open network everything works fine, but if i try to connect to protected network, it doesn't connect properly. I did not reflash CM11 to check if it fixes problem, nor factory reset. My friend told me it is wifi modules problem but i can't find any for this phone/ROM. Any help appreciated!
EDIT: I will reflash only if i need to (if it solved problem to anyone), cause i have many apps, accounts, etc...
DarkAnzy Kernel + AORP 4.4.2 RC1.2 - wifi not working
DjDexter5GHz said:
I have Arc S and CM11 on it. I don't have latest update since on latest messaging app is buggy. When i connect to open network everything works fine, but if i try to connect to protected network, it doesn't connect properly. I did not reflash CM11 to check if it fixes problem, nor factory reset. My friend told me it is wifi modules problem but i can't find any for this phone/ROM. Any help appreciated!
EDIT: I will reflash only if i need to (if it solved problem to anyone), cause i have many apps, accounts, etc...
Click to expand...
Click to collapse
I've installed DarkAnzul kernel 3.4 with custom ROM AORP 4.4.2 RC1.2 .
Everything is fine, except for wifi. I can't switch in ON.
I read in some thread that maybe installing wifi modules from DarkAnzu would arrange it. But just flashed it and it's not working either.
Any help would be appreciated.
Thanks.
Alex.
DjDexter5GHz said:
I have Arc S and CM11 on it. I don't have latest update since on latest messaging app is buggy. When i connect to open network everything works fine, but if i try to connect to protected network, it doesn't connect properly. I did not reflash CM11 to check if it fixes problem, nor factory reset. My friend told me it is wifi modules problem but i can't find any for this phone/ROM. Any help appreciated!
EDIT: I will reflash only if i need to (if it solved problem to anyone), cause i have many apps, accounts, etc...
Click to expand...
Click to collapse
If you get the problem connecting with protected network since the day you flashed your rom, reason may come from your rom or kernel. Try to reflash another kernel, if it does not help then you should try another rom. In case your wifi problem has just happened recently, factory reset or reflash, it's up to you.
Hope it help, you can wait for other suggestions!
tekieboy said:
I've installed DarkAnzul kernel 3.4 with custom ROM AORP 4.4.2 RC1.2 .
Everything is fine, except for wifi. I can't switch in ON.
I read in some thread that maybe installing wifi modules from DarkAnzu would arrange it. But just flashed it and it's not working either.
Any help would be appreciated.
Thanks.
Alex.
Click to expand...
Click to collapse
Have you tried to flash the kernel inside the AORP 4.4.2 RC 1.2 zip?
motlanvamaimai said:
If you get the problem connecting with protected network since the day you flashed your rom, reason may come from your rom or kernel. Try to reflash another kernel, if it does not help then you should try another rom. In case your wifi problem has just happened recently, factory reset or reflash, it's up to you.
Hope it help, you can wait for other suggestions!
Have you tried to flash the kernel inside the AORP 4.4.2 RC 1.2 zip?
Click to expand...
Click to collapse
I downgraded to CM 10.2 release version, it seems that its ok on it, so it is definitely problem with new cm 11.
DjDexter5GHz said:
I downgraded to CM 10.2 release version, it seems that its ok on it, so it is definitely problem with new cm 11.
Click to expand...
Click to collapse
Until now, CM11 is not really stable enough yet, however, our developers still keep working hard to make it better, just waiting.
motlanvamaimai said:
Until now, CM11 is not really stable enough yet, however, our developers still keep working hard to make it better, just waiting.
Click to expand...
Click to collapse
Older versions were much more stable than last few. I (almost) thought they would soon release it finally, until now...
It worked!
motlanvamaimai said:
If you get the problem connecting with protected network since the day you flashed your rom, reason may come from your rom or kernel. Try to reflash another kernel, if it does not help then you should try another rom. In case your wifi problem has just happened recently, factory reset or reflash, it's up to you.
Hope it help, you can wait for other suggestions!
Have you tried to flash the kernel inside the AORP 4.4.2 RC 1.2 zip?
Click to expand...
Click to collapse
I've just flashed the boot.img inside the .zip . Rebooted.
Wifi is working perfect!
AORP rom is the best 4.4.2 rom I've tried on my Arc S. It's fast, stable and now everything works.
Thanks motlanvamaimai for the help.
Wifi module
My wifi is not working. After flash Wifi module from Dark Kernel CM11.0 http://forum.xda-developers.com/showthread.php?t=2549742
It is working fine now. You may try it
Device: Xperia Arc S (LT18i)
Kernel: [Kernel][CM11]Vatsal's Kernel v3
ROM: [ROM][4.4.2][24/02/02/14] Unofficial [Arc/Arc S/PRO][1.3] AOSB Project - The End of The Line !
Please help noob here and I'm having problems with the latest ROM from pacman 4.4 build. Every time I install I do not get any data or signal. Also when I try to sign into Google even with WiFi on I get message saying unreliable connection or I'm not signed up for data if issue persist to contact customer service any help will b appreciated.
What build are you trying to install, have you tried re-downloading the ROM also if you're trying to flash a different kernel with the ROM you have to let it boot once before doing so.
xBkKx said:
What build are you trying to install, have you tried re-downloading the ROM also if you're trying to flash a different kernel with the ROM you have to let it boot once before doing so.
Click to expand...
Click to collapse
I have tried downloading all the updates that pacman released in august. I also downloaded the 20140825 and 20140819 twice and still not working. everything works fine with the 4.3 pacrom. Thanks for reply.
Found solution to no data or signal on 4.4 here is a link if anyone else runs into this problem http://forum.xda-developers.com/showthread.php?p=52754863. Big thanks to ducter
Interesting, never had that issue myself but glad you found a solution!
xBkKx said:
Interesting, never had that issue myself but glad you found a solution!
Click to expand...
Click to collapse
Yea its weird reading the thread it only happens to some phones. I guess I just had one of those phones.