[Q] Bootloop, no recovery - Galaxy Tab S Q&A, Help & Troubleshooting

Hi,
I tried to install the xposed framework for Android 5 on my Samsung Galaxy Tab S 10.5 with Blisspop, which worked totally fine. After enabling a module and restarting though, I am in a bootloop with the Cyanogenmod screen. I also cant get to the recovery for some reason. But I am able to get to the download mode.
Does anybody have an idea?

Do some googling, find an apk for Flashify and install. Within the menu, find the recovery reboot option and get back to TWRP.
Post edit: I read that too fast.... You're in a bootloop....
Can you 3 button into recovery? Or is that even a option anymore?

It's highly unlikely you have lost recovery, however just reflash recovery. Then hard reset and boot to recovery.
You WILL be able to get into recovery if you do the right combo at the right time.

I've found that when this happened to me on a number of occasions , enter the first download mode screen but instead of going into download mode with the up volume selection use the down selection to reboot then quickly press and hold the up, power and home buttons as normal for recovery it should get you to recovery. Good luck

l4ck4ff3 said:
Hi,
I tried to install the xposed framework for Android 5 on my Samsung Galaxy Tab S 10.5 with Blisspop, which worked totally fine. After enabling a module and restarting though, I am in a bootloop with the Cyanogenmod screen. I also cant get to the recovery for some reason. But I am able to get to the download mode.
Does anybody have an idea?
Click to expand...
Click to collapse
I faced the same situation, flashed stock firmware.. :highfive:
Skip typing - hit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
instead..

Related

MIUI piano lockscreen pattern gone wrong.

Hello,
I was being dumb.
I installed the piano lockscreen v2 on MIUI V3.6.7. I changed my password to 5,5,4. But there should not be any commas so I have to write 554 instead. The numbers represent the keys from left to right, so 554 would mean the notes G,G,F.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyway, now I can't lock my phone. So then I tried to go into recovery and reflash the MIUI rom + gapps, but it didn't work, as the piano lockscreen was still there. Then I tried again to get into recovery and that's when I got the dead android again.
So now I'm in a situation where I can't either unlock my phone, not get into recovery and not being able to use GN toolkit as I can't unlock the darn phone to toggle the USB debug.
Can anybody help me please? What the hell should I do?
Wipe data/factory reset in recovery. Turn off phone, push and hold power and both volume buttons, select recovery. If that's not working, try flashing another recovery using fastboot.
speedyink said:
Wipe data/factory reset in recovery. Turn off phone, push and hold power and both volume buttons, select recovery. If that's not working, try flashing another recovery using fastboot.
Click to expand...
Click to collapse
Yeah the toolkit did the trick for a new recovery. I was thinking about it, but somehow I thought it wouldn't work because I couldn't toggle the USB debug in my phone as I couldn't unlock the lockscreen.
Anyhow, thank you.
Rapydax said:
Yeah the toolkit did the trick for a new recovery. I was thinking about it, but somehow I thought it wouldn't work because I couldn't toggle the USB debug in my phone as I couldn't unlock the lockscreen.
Anyhow, thank you.
Click to expand...
Click to collapse
Fastboot doesn't require the phone to be bootable, which is nice.
No prob.

Big problem! my phone bootloop on the logo "galaxy note 2 N7100"

hello I don't speak English very well , but I 'll make it short ! I made a bad flash of the rom on my phone with command -line ADB , because my "HOME" button is out of order ! my phone start on the logo galaxy note 2 N7100 (see picture) , and don't stop to boottloop over and over again !
How can I fix this and make another correct flash to make my phone work again .?? i will appreciate any help to get me out of it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
turn it off and get your self a USB JIG, try searching on google on how to make one and on how to use it. flash it back to stock rom, once u are done and u want to either flash using CWM, install terminal app and type SU, then reboot recovery if you want to get to bootloader, then type reboot bootloader
[email protected] said:
turn it off and get your self a USB JIG, try searching on google on how to make one and on how to use it. flash it back to stock rom, once u are done and u want to either flash using CWM, install terminal app and type SU, then reboot recovery if you want to get to bootloader, then type reboot bootloader
Click to expand...
Click to collapse
i've already used a jig usb , 5 or 6 years ago
it will solve my problem without my "HOME" button .?

[help] cannot boot into TWRP or ROM after flashing autorec TWRP

I have two G3 D855 phones and what i did was exactly the same as my primary one, and it's not working
For the secondary phone
1) everything was perfect after I changed 32GB chips (ROM, my friend flashed something wrong and hard bricked the device) from repair shop, but I just lost the IMEI, so it's showing 0 currently (i know i can repair but don't bother yet)
2) phone is normal in 6.0MM nor I use LGUP to downgrade to 5.0 LP
3) used "newest root method v03" from there to root the phone
http://forum.xda-developers.com/lg-g3/general/guide-root-method-lg-devices-t3129197
4) go to playstore, download AutoRec D855 to install TWRP
5) problem starts here
once i reboot to TWRP using reboot widget, or adb command, i can go into TWRP, but phone stuck in LG logo after another reboot
To boot up the OS again, I have to take out the battery for 10+ min, then insert it again and it will boot up, and i can also go into TWRP from the OS
or if i turn off device, I cannot boot up, not until i take out the battery for 10+ min
I have flashed the phone using KDZ twice and same problem, after install TWRP from AutoRec, I have this bootup problem.
Any help please?
missing download mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when i try to put it into download mode (holding vol up and plug in USB) or using "ADB reboot download" command
that's what i see, i think i messed up my download mode?
when I follow this guide, it said "failed to erase" in first step
http://mybaseisrace.blogspot.hk/2016/02/how-to-fix-lg-g3-download-mode-not.html

Lenovo Lemon 3 (K32C36) cant boot in recovery mode.

Need help please, before 2 days i try to install this rom PAC-ROM but when i go step by step as the description, now i got a big problem i think... my phone cant boot at recovery mode.
steps i followed:
1 ) i flashed a Rooted ROM based on official ROM from baidu site
2) i installed TWRP as shown there --> http://forum.xda-developers.com/showpost.php?p=67546530&postcount=140
3) i go step by step as shown there ---> http://forum.xda-developers.com/android/development/rom-pac-rom-6-mm-lenovo-vibe-k5-t3408483
4) i did backup only system files
5) i format/wipe everything
then when i try to install the new ROM from SD it says me that fail to mount /data
i try to format again to wipe again and again but the same, cant install and cant mount nothing
so i try to restore the system backup i did before then my phone boot normally in previous rooted ROM but now i cant open recovery mode on my phone and cant flash nothing, because adb cant boot in bootloader mode...
Please and help how to recover my phone, because now is in Chinese ROM and nothing work properly (no google services, no playstore, no keyboards, etc)
Thank You
After this i try to restore the system that i did back up before and my phone boot with the last ROM i got before (K32c36 S034) and rooted but when i try to boot in recovery mode its impossible.....
i have tried everything with hard reset with adb with qpts but nothing...
when i press "recovery" just a black screen appears and i have to long press power button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any help plz??

Galaxy Tab S4 stuck at boot after trying to root

Hello together
I tried to root my Samsung Galaxy Tab S4 according to https://appuals.com/how-to-root-the-samsung-galaxy-tab-s4/
There I came up to step 10 (so I flashed the two files). Now the Tablet is kind of stuck in the boot screen showing this (the same for step 8 and 10 but at step 10 i lost the ability to get to the download mode):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The only thing possible is to gamble a bit with the keys power, volume up and down to get the yellow sign in the top left showing "kernel" instead of "recovery". Otherwise if I press all three buttons together the following screen comes:
I am a complete noob in that kind of things and got no idea what to do now. There is no possibility to open the download mode to revert something, neither TWRP is shown as it should according to the Description in Link above. If possible I dont want to get anything deleted. What can I do?
EDIT: If possible I still want to root the tablet because I only see advantages in it, even I never found a good (explanatory) tutorial on it.
kind regards
alhuwile
Ok as I was very impatient and tried a bit, the blue screen is actually the "ODIN Download Mode". I reinstalled the stock firmware (loosing all data) (and rooted the device with Magisk later on) so the sm-t830 works perfectly again.
alhuwile said:
Ok as I was very impatient and tried a bit, the blue screen is actually the "ODIN Download Mode". I reinstalled the stock firmware (loosing all data) (and rooted the device with Magisk later on) so the sm-t830 works perfectly again.
Click to expand...
Click to collapse
Which guide did you follow and what firmware are you using?

Categories

Resources