Related
hi,
Odin gives me this error if i try to flash any rom:
cannot open the usb serial port. code: 32
samusng usb drivers are installed
same errors with other com ports
can somebody please help me?
firmware : XXKC1 , Android 2.2.1
maybe first install phiexz's cyanogenmod (trough recovery)
then try again maybe its doesnt support android 2.2.1 if then not works try on different computer
P.S are all drivers on your PCU up to date?
if i helped u plz press thanks
lorddemon66 said:
hi,
Odin gives me this error if i try to flash any rom:
cannot open the usb serial port. code: 32
samusng usb drivers are installed
same errors with other com ports
can somebody please help me?
firmware : XXKC1 , Android 2.2.1
Click to expand...
Click to collapse
If you start Kies,it sees phone or no?? have you tried??
Kies could be interfering with Odin. Either way this is probably some driver-related issue.
Darkshado said:
Kies could be interfering with Odin. Either way this is probably some driver-related issue.
Click to expand...
Click to collapse
I too was having "Can't open the Serial COM". Darkshado was right -- Kies was interfering.
Go into Kies, Tools -> Preferences, unselect "Run Samsung Kies automatically when a device is connected", save the change, close out of Kies, and then restart ODIN 3. Try flashing now.
phi11yphan said:
I too was having "Can't open the Serial COM". Darkshado was right -- Kies was interfering.
Go into Kies, Tools -> Preferences, unselect "Run Samsung Kies automatically when a device is connected", save the change, close out of Kies, and then restart ODIN 3. Try flashing now.
Click to expand...
Click to collapse
sorry bro BUT this doesn't work for me......fyi
Go into task manager (CTRL+SHIFT+ESC) and forceclose all kies processes.
Make sure you're administrator on your pc.
I googled it abit and most of the time its kies causing this problem.
i figured out the cause
I changed to another computer and have successfully
[Q] odin says" Can't open the serial(COM) port." and fails to flash recovery.tar
hey,...
i am trying to root my tmobile galaxy S2 and i am in downloading mode...put recovery.tar file in PDA section and when i hit start...nothing happens and after a while i get failed notice and says " Can't open the serial(COM) port." what am i doing wrong.
Did you install the usb drivers first? If not here:
http://www.mediafire.com/?6onrjbyd46j4lhj
that could be the only reason i can think of that odin isn't detecting phone. Also try a different usb port on the computer, and if that doesn't work try a different cable.
uninstall Kies if u have ut because the drivers stick i did and now it works lol
hlimbu00 said:
hey,...
i am trying to root my tmobile galaxy S2 and i am in downloading mode...put recovery.tar file in PDA section and when i hit start...nothing happens and after a while i get failed notice and says " Can't open the serial(COM) port." what am i doing wrong.
Click to expand...
Click to collapse
Darkshado said:
Kies could be interfering with Odin ...
Click to expand...
Click to collapse
I too was having "Can't open the Serial COM". Kies was interfering.
Go into Kies, Tools -> Preferences, unselect "Run Samsung Kies automatically when a device is connected", save the change, close out of Kies, and then restart ODIN 3. Try flashing now.
reinstall drivers with KIES. go to troubleshoot and then you should be good to go after. also check the cable too..
hlimbu00 said:
hey,...
i am trying to root my tmobile galaxy S2 and i am in downloading mode...put recovery.tar file in PDA section and when i hit start...nothing happens and after a while i get failed notice and says " Can't open the serial(COM) port." what am i doing wrong.
Click to expand...
Click to collapse
also sometimes you have to try a different version of odin before it works it happens to me alot. one odin wont work but another does. it's crazy.
Can't open the serial(COM) port Error
hlimbu00 said:
hey,...
i am trying to root my tmobile galaxy S2 and i am in downloading mode...put recovery.tar file in PDA section and when i hit start...nothing happens and after a while i get failed notice and says " Can't open the serial(COM) port." what am i doing wrong.
Click to expand...
Click to collapse
I had the same problem and I fixed it by exiting from Kies software. You might get this new error "Complete(Write) operation failed". Then all you should do is just pulling your battery out and restarting odin and phone. I disables the firewall too, but I don't think the problem was firewall. Anyway mine is working well and I did it.
Hi, I'm also having the same problem. The 'Charging paused...' message kept popping up so I tried to flash a different official rom via odin (I was on official ICS). Unfortunately the flash failed and now when I try to turn on the phone the 'Firmware upgrade encountered an isuue......' message comes up. I tried connenting to kies also but can not to do so. I have hope as i can get into download mode but can't flash a rom. I got halfway once then suddenly it failed again. Your help is much appreciated. Thanks in advance.
Thank You.
phi11yphan said:
I too was having "Can't open the Serial COM". Kies was interfering.
Go into Kies, Tools -> Preferences, unselect "Run Samsung Kies automatically when a device is connected", save the change, close out of Kies, and then restart ODIN 3. Try flashing now.
Click to expand...
Click to collapse
Thank You.
disabled Kies and problem solved
iNeedICS said:
uninstall Kies if u have ut because the drivers stick i did and now it works lol
Click to expand...
Click to collapse
Thanks, this is what was causing me this error. I was close to Hulk-smashing expensive things :laugh:
Re: [Q] odin says" Can't open the serial(COM) port." and fails to flash recovery.tar
NomadRip said:
Thanks, this is what was causing me this error. I was close to Hulk-smashing expensive things :laugh:
Click to expand...
Click to collapse
Haha yea don't resort to hulk smashing things lol just send them to me instead of breaking them I'll delightfully take them off your hands! I'll pm you my address so you can ship xD jkjklolol
Sent from Squishy's N⁴!
This worked for me
I had the same exact problem (but this was on my Galaxy Y )
What I had was an old version of KIES (~ 2011 ).
Steps :
1) Uninstall the old Kies
2) Download the latest Kies (2013)
I have installed drivers but i cant connect my phone to pc when odin mode is on in phone but i can connect phone to pc when bootloader is on or recovery mode is on . However, when i boot into recovery mode and connect phone to pc and open odin and start it ,it shoes cant open the serial (com) port.
what to do
I'm flashing stock software to phone as my phone got bricked, hurry please help me to unbrick
ttffjioo said:
I have installed drivers but i cant connect my phone to pc when odin mode is on in phone but i can connect phone to pc when bootloader is on or recovery mode is on . However, when i boot into recovery mode and connect phone to pc and open odin and start it ,it shoes cant open the serial (com) port.
what to do
I'm flashing stock software to phone as my phone got bricked, hurry please help me to unbrick
Click to expand...
Click to collapse
The phone needs to be in download mode for Odin. And kies shouldn't be running on your PC. Go to task manager and kill any kies processes.
Download mode on the phone as I remember is power button and volume down.
?
If anyone is using Odin to flash 4.1.2, I found either Odin 3.04 or to be the only ones that worked for me.
Darth said:
The phone needs to be in download mode for Odin. And kies shouldn't be running on your PC. Go to task manager and kill any kies processes.
Download mode on the phone as I remember is power button and volume down.
Click to expand...
Click to collapse
when my phone is on download mode for odin, it cant connect to pc as yellow border line is not showing on odin . I have uninstalled my kies.
tell me what to do
ttffjioo said:
when my phone is on download mode for odin, it cant connect to pc as yellow border line is not showing on odin . I have uninstalled my kies.
tell me what to do
Click to expand...
Click to collapse
Try different Odin versions perhaps. Uninstall Samsung drivers and install the newest kies again to reinstall them. Don't need to uninstall kies , just be sure all its processes are killed in your PC task manager.
There's nothing you can do until your phone and Odin are communicating. Try another cable, try another USB port on your computer. Last, try another computer.
Darth said:
Try different Odin versions perhaps. Uninstall Samsung drivers and install the newest kies again to reinstall them. Don't need to uninstall kies , just be sure all its processes are killed in your PC task manager.
There's nothing you can do until your phone and Odin are communicating. Try another cable, try another USB port on your computer. Last, try another computer.
Click to expand...
Click to collapse
I have downloaded latest kies 3 from official website with latest drivers
I uses cable of my tab 4 (which easily get connects with pc with its cable) to connect my y duos to pc.
Am i doing any thing wrong?
ttffjioo said:
I have downloaded latest kies 3 from official website with latest drivers
I uses cable of my tab 4 (which easily get connects with pc with its cable) to connect my y duos to pc.
Am i doing any thing wrong?
Click to expand...
Click to collapse
Try everything I suggested. Otherwise, I'm out of ideas unfortunately.
I'm curious, what does your phone show as in device manager in pc when connected? Or is it not being seen at all?
And Y Duos? You know this is the Tmobile S2 section, right? ?
Lots of Y Duos bricked talk here as well as other links in this thread to review.
http://forum.xda-developers.com/showthread.php?t=2275057
my galaxy y is brick.
only downloding mode is open.
i think if i flash my phone,it is again good.
but when i connect my phone in pc ,pc say usb driver not recognized.
but i install samsung usb driver.
i change my usb cable,also try in frnds pc,
but i cant connect my phone.
for these reason i cant flash my phone!
if anyone help me!
Imtiaz369 said:
my galaxy y is brick.
only downloding mode is open.
i think if i flash my phone,it is again good.
but when i connect my phone in pc ,pc say usb driver not recognized.
but i install samsung usb driver.
i change my usb cable,also try in frnds pc,
but i cant connect my phone.
for these reason i cant flash my phone!
if anyone help me!
Click to expand...
Click to collapse
Try to first open the phone in download mode and then connect the usb driver. Try downloading odin from another site. And pls post in FAQ.
Sent from heaven!
start kies,and then use odin,when both not worx reinstall and try again,it must work
Its real easy just try to connect the phone to ur pc without download mode the phn starts to the charging mode and u will observe tht ur drivers get installed after they r installed use odin normally happy flashing:thumbup:
Sent from my GT-S5360 using xda premium
Remove kies/sam driver and reinstall then try sure its working ..... Always close kies ..fflash mode.....
Sent from my GT-S6102 using xda premium
1. Fully Uninstall all Kies and reinstall it.
2. If your battry is low, switch off your mobile and charger your mobile
3. After complted charging, go to download mode (Powr + home + down arrow)
4. Open KIES then connect your mobile in download mode, now it will detected automatically.
5. Open ODIN check COM port is in yellow color, if it is in yellow color, close your KIES.
6. After completely closing of KIES, select your firmware version in ODIEN then flash it.
All the Best .........
try Odin from other site
change your USB cable
Imtiaz369 said:
my galaxy y is brick.
only downloding mode is open.
i think if i flash my phone,it is again good.
but when i connect my phone in pc ,pc say usb driver not recognized.
but i install samsung usb driver.
i change my usb cable,also try in frnds pc,
but i cant connect my phone.
for these reason i cant flash my phone!
if anyone help me!
Click to expand...
Click to collapse
dont panic,first of all remove sim card and sd card
after that start with Odin
if you still can use download mod then its ok
inform me
everything you need is here thanx to Ronnieryan
http://forum.xda-developers.com/showthread.php?t=1675474&page=2
Troubleshooting Instructions
Imtiaz369 said:
my galaxy y is brick.
only downloding mode is open.
i think if i flash my phone,it is again good.
but when i connect my phone in pc ,pc say usb driver not recognized.
but i install samsung usb driver.
i change my usb cable,also try in frnds pc,
but i cant connect my phone.
for these reason i cant flash my phone!
if anyone help me!
Click to expand...
Click to collapse
1.Try to redownload the firmware that you've flashes and flash it again if it will help.
Troubleshooting Instructions:
"USB Driver Not Recognized" Problem ?
Well here's my list of troubleshooting instructions:
1.If your USB Driver is not recognized , Open Kies on your PC/Laptop then click "Troublelshoot connection problem" button , It will reinstall the USB Driver named "SAMSUNG USB Driver for Mobile Phones" . Wait until it finish .
2.Uninstall Kies and the USB Driver named "SAMSUNG USB Driver for Mobile Phones" on Add and remove programs on Control panel , Then after you install Kies again then do the directions on Step 1 installing your USB Driver.
3.Try Redownloading Odin v 1.85 , Click on my attachment to download.
4.Make sure your Kies is up to date.
5.Make sure that your battery is 100 % fully charged
6.Remove your SIM Card before flashing , That could interrupt the flashing process.
7.Press Ctrl+Alt+Delete and go to Processes and terminate the process named "KiesHelper.exe" and "KiesTrayAgent.exe" and if you're using ADB then terminate the process named "adb.exe" ( Im not sure if adb.exe is the correct name of ADB process,Correct me if im wrong)
8.Make sure before you press the "Start" button on Odin you should Notice these two thing before pressing the Start button : ID:COM and make sure you have got the "Added!!!" word on the box (Where you can see if flashing has successful ex. Success 1/0 Failed
i have strange problem with my Samsung galaxy grand i9082 is not detecting in odwin.
phone is detected by pc, its connected as MTP or PTP mode i can transfer file from pc and mobile. but phone is not detected in odin
also when phone in download mode its not detected in odin (pc can detect it)
i have tried all odin version 3.04, 3.07. 3.09 but same problem.
phone was getting detected in odin with stock 4.2, after i flashed to custom ROM probam-20140312-UNOFFICIAL-i9082-k2wl-build9 , its not getting detected in odin.
please help me..
ROM :- probam-20140312-UNOFFICIAL-i9082-k2wl-build9
recovery :- philz_touch_6.19.3-i9082
i have tried with different USB cabled, but same problem phone is deteced by pc but not by odin, same problem on wint7, win xp, i tried it on different pc also...
please let me know what can be done, i want to re-flash to stock 4.1
Install driver software of Samsung and install the kies in pc but dont open tge kies with odin coz it will fail ur flashing process..See whether drivers r installed or else odin will not detect...
Sent from my GT-I9082 using XDA Premium 4 mobile app
U can simply find the sammy drivers (~30mbs) on a thread i made [must read thread]... Install drivers from that... Restart pc/laptop... Open odin and it will br detected, if still not; try inserting usb port about 80% or 90%(sometimes its cable problem, have faced many times ).. Do that nd u will be good to go... Hope i helped
Sent from my GT-I9082 using Tapatalk
---------- Post added at 02:12 PM ---------- Previous post was at 02:10 PM ----------
What i mean is, insert usb anf take it a bit back outside (like 10% of it, )..hope u et what i am saying !..all i mean is try adjusting it fr angles and throughs ....
Sent from my GT-I9082 using Tapatalk
raghavsharmaxda said:
U can simply find the sammy drivers (~30mbs) on a thread i made [must read thread]... Install drivers from that... Restart pc/laptop... Open odin and it will br detected, if still not; try inserting usb port about 80% or 90%(sometimes its cable problem, have faced many times ).. Do that nd u will be good to go... Hope i helped
Sent from my GT-I9082 using Tapatalk
---------- Post added at 02:12 PM ---------- Previous post was at 02:10 PM ----------
What i mean is, insert usb anf take it a bit back outside (like 10% of it, )..hope u et what i am saying !..all i mean is try adjusting it fr angles and throughs ....
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
thanks for help,
issue with my phone is, it's detected by PC but not by odin, so it seems drives are present, also i have installed kies but still same issue....
Will try installing drivers and method you said to insert USB about 80 to 90%.
can i have link for sammy drivers
anup13 said:
thanks for help,
issue with my phone is, it's detected by PC but not by odin, so it seems drives are present, also i have installed kies but still same issue....
Will try installing drivers and method you said to insert USB about 80 to 90%.
can i have link for sammy drivers
Click to expand...
Click to collapse
Yeah.. Then its usb connection problem ...
Wait..lemme give u link for it(but i dont think u need link as u have already installed drivers mahn).....
Sent from my GT-I9082 using Tapatalk
raghavsharmaxda said:
Yeah.. Then its usb connection problem ...
Wait..lemme give u link for it(but i dont think u need link as u have already installed drivers mahn).....
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
is there any other way to flash to custom rom other than odin..
anup13 said:
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
Click to expand...
Click to collapse
Don't use Samsung cables use different one in my case i used old Nokia usb cable and it worked...
anup13 said:
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
is there any other way to flash to custom rom other than odin..
Click to expand...
Click to collapse
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6
Uninstall all drivers n kies as well....restart ur pc n install again from scratch....n try...it happened with me many times...just suggestion...
DMJoh said:
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6
Click to expand...
Click to collapse
Thanks for you help. it worked.. now odin is able to detect my phone.. :good:
anup13 said:
Thanks for you help. it worked.. now odin is able to detect my phone.. :good:
Click to expand...
Click to collapse
Thats Great!! HAppy to hear that :laugh: :good:
DMJoh said:
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6
Click to expand...
Click to collapse
Thanks alot man, it worked great! i had the same problem as above!
Odin is not detecting my phone
I have tried almost all methods, but still my samsung i9082 is not detected by odin. And when ever i connect my samsung with laptop during download mode.. One driver is shown as not installed name "CDC serial".
Please help
Not Detecting Odin + Dnt have CWM , and need custom rom
i have same problem , it says Base Station Not Installed ,
1. I am unable to enter to recovery mode it goes on both volume up+ home + power & volume down+ home + power , into download mode .
2. I need to flash custom rom and want any CWM so i can go to recovery mode whenever i want
3. When i factory reset from setting , it only runss on android cartoon , and after that it goes straight to screen , no language selection as we do in all androids after reset by clicking next next , but it goes directly to screen.
Install every driver , and also changed phone , buy another one but same problem
Please sir help me regarding above issues i will be greatful to you .
Thanks & Regards,
Inayat
inayat1988 said:
Install every driver , and also changed phone , buy another one but same problem
Please sir help me regarding above issues i will be greatful to you .
Thanks & Regards,
Inayat
Click to expand...
Click to collapse
What do you mean exactly by changed phone and buy another one?
INVALID IMEIs / SIMS not working
Dear Sir,
I got that i need IMEI fixing as it is showing invalid both imeis. (board is MT6572)
1. Set is LG L Bello , info is given in pix attched please.
2. For rooting Tried almost all methods GUI but all failed rooting.
3. Tried To fix IMEI from MTK-DROID-TOOLS , showing errors, pix are attached.
Please help me to flash CWM , Root my device and fix Invalid IMEIs issue.
Note : all info i considered needed for you to help me, is attached in shape of pix
Best Regards,
Inayat
please help me and save me
please help me my grand 2 is made by Vietnam, and its not detectable in any of the trick mentioned above , please help me , one thing when i plug my mobile with pc , and check the my pc properties , it shows yun os interface .. please help me how i can able to detect this interface with odinn please help ...
hey guys
i know it's late for this question but please help me
i have samsung wave and installed badadroid years ago and reset to factory settings so zimage deleted now my phone doesn't boot and can't reach recovery and when i connect it to pc can't recognize it so multiloader does not find it
is there a way to recover my phone?
can i somehow put zimage back?
You turn on the download mode, before connecting multiloader ?
Union_Jack said:
You turn on the download mode, before connecting multiloader ?
Click to expand...
Click to collapse
yes i do that but nothing happens i installed Kies and drivers but my pc does not recognize it
escexception said:
yes i do that but nothing happens i installed Kies and drivers but my pc does not recognize it
Click to expand...
Click to collapse
Try to complete the KIES processes in the task manager.
Use another cable, other USB ports, or another computer.