Hi.I'm going to buy an italian xperia play branded TIM.
My question is:Can I flash a general firmware to debrand the phone and than unlock the bootloader with fastboot?
Can someone explain me how to do these things?
Thanks very much
Think the 1st sticky thread at the top of this forum should answer all your questions!
well.
my last question.
If i buy a branded xperia,can I flash a general stock firmware non branded after i installerd Clockworkmod for locked bootloader?and next,unlock bootloader and flash doomkernel?
A better way to do that is just to not flash the CWM for locked bootloaders. The reason being that doomlords kernel includes CWM in it already, I'm not sure how the locked version is stored or whatever but you might run into problems if you have both "installed".
So there is a Doomlords kernel for locked bootloaders? mmm..this is a good news.In fact i wanted to flash CWM first because i thought that i have to unbrand my xperia and than flash another kernel.So i can buy xperia branded and install doomkernel? or i have to:
by xperia-install CWM-unbrand Tim-Unlock bootloader-remove CWM-install doomkernel? excuse me for noob
easiest way to debrand your phone: search Wotanserver on google and use their software to debrand (really esay, there's a step by step guide), then do whatever you want...
No, how it works is you have to unlock your bootloader in order to flash a kernel. As for unbranding you can either use the Wotan server or a .ftf file, neither of these require an unlocked bootloader. You can also flash CWM with a locked bootloader, however this is not the one included in doomkernel, and it will not grant you the ability to flash ROMs as you need an unlocked bootloader to flash the kernel. You want to touch the kernel? You need to unlock your bootloader. Unbranding? You can simply use the two methods listed above. All I was saying earlier is that if you plan on getting your bootloader unlocked (which in most cases is going to run you $24) theres no need to install the locked bootloader CWM first as once youre unlocked you can just flash doomkernel and already have CWM installed.
BuckM said:
No, how it works is you have to unlock your bootloader in order to flash a kernel. As for unbranding you can either use the Wotan server or a .ftf file, neither of these require an unlocked bootloader. You can also flash CWM with a locked bootloader, however this is not the one included in doomkernel, and it will not grant you the ability to flash ROMs as you need an unlocked bootloader to flash the kernel. You want to touch the kernel? You need to unlock your bootloader. Unbranding? You can simply use the two methods listed above. All I was saying earlier is that if you plan on getting your bootloader unlocked (which in most cases is going to run you $24) theres no need to install the locked bootloader CWM first as once youre unlocked you can just flash doomkernel and already have CWM installed.
Click to expand...
Click to collapse
ok thanks.i heard that the italian xperia and not the verizon ones can be unlocked with an official method released by sony
Yep thats true, it's the case with a lot of r800i's, if you can put your phone into fastboot mode (turn off, hold search button, plug into usb, blue light comes on) you can unlock it for free through sonys online tool. While the light will go on for the CDMA version you don't have an IMEI to enter on the site so it wont work. All other plays CAN be unlocked, but its not free, you need to go through a pay service to enable fastboot.
Very thanks!however one of my friends bought an xperia and it was GSM R800i TIM and he was able to debrand and unlock so i think that also i can unlock my future xperia,or almost i hope it
Ya it all depends on where you get it from, but keep in mind it only costs $24 to unlock, so even if you find one say on eBay thats cheap but locked to a carrier, you could still just pay $24. That being said they're going pretty cheap now so I don't think you'll have a problem finding one, unlocked or otherwise. As a side not though, you don't need to be unlocked to debrand the phone, you just flash a different firmware file .
and so i can flash a generic firmware with flashtool or similiar?without installing CWM for loocked bootloaders?that's simply excellent!It's can't be better Ok,i will buy an xperia play and not lg optimus dual,that i simply hate xD i don't want a super-power phone,with a bad designe and without the pad.i loved,i love and i will love pad in gaming
Yep you can flash firmware, install CWM, and root, all without unlocking the bootloader (not that you need one to do the others). Unfortunatly the more fun stuff does require an unlocked bootloader, ie overclocking, undervolting, custom ROMs, etc. Anyway you always have the option, so read up on it and decide if you need it or not, regardless, enjoy your new toy
Not sure exactly where to post this as your forums are very American Carrier focused so I just went with model number.
I am just entering the world of rooting Android phones etc. so forgive my noob-osity but am eager to learn after realising this carrier phone really isn't MY phone.
I am wanting to use Chainfire's CF-AutoRoot to get root access on my Australian Vodafone GT-N7105T device however his instructions make very clear that the device will be bricked if I do not unlock the bootloader. I cannot seem to find a method of unlocking the bootloader for this specific device. Can anyone help with this?
Also just in general, some Rooting methods I have read about don't seem to "require" unlocking the bootloader or maybe haven't mentioned that it is part of the process.
Is unlocking the bootloader something that needs to be done ALWAYS when you root? I thought that unlocking the bootloader was only required if you wanted to flash custom ROMs and that having a locked bootloader did not prevent some rooting methods? If that is the case then I'm confused as to why Chainfire's CF-AutoRoot needs an unlocked bootloader as it's purpose is to leave everything stock?
Thanks for your assistance.
Okay, so i had finally got around to getting CWM on my phone so i was going to flash a rom tonight so i put cm 11 and gapps on my sd card and went to rom manager to install them but the folder i had put them in would not shown on them so i copied and pasted them around and still couldnt find them so i turned pushed reboot into recovery to just do it the manual way and my phone just doesn't turn on at all.
P.s i had unlocked the bootloader earlier someone said its already unlocked so that might be the reason my phone will not turn on
yup , unlocking an unlocked bootloader will cause a brick. i know because i did the same thing. i dont know if is a way to recover or not . (i got a new phone). so wait for someone else to chime in , maybe there is a fix.
err on the side of kindness
the thing is nobody unlocked it when i went to unlock by EZ unlock it just unknown so then i unlocked it then i read somewhere online that the s3 t mobile already is unlocked .
Yes it is already unlocked, so any unlock method you used would've been intended for a different device. My best guess is it replaced your bootloader with a hacked one from a different device. (I could be wrong on that though)
Your only options are a JTAG service, or the debrick method stickied in the development section. It may or nay not work, depending on what was flashed, but it's worth trying before paying for a JTAG repair.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
*apologies for any obvious information I may have missed*
I have a Moto Z Play that has a locked bootloader. I've searched through a lot of these forums, went to other sites, and I've still not found the information I probably should have by now. I want to put the Resurrection Remix Rom on my phone, but I'm confused on a few different points. The phone was given to me and it looks like it was Verizon before I got it, and I use Straight talk as a carrier. I've seen the unlock process on Motorola's page, and it says my bootloader is not eligible for unlock. With the capabilities of a lot of these developers, I find it hard to believe this means the end of the road. My question is whether I can wipe the phone and somehow unlock the bootloader? Is there anyway I can speak to verizon to give me something to get an unlock code from Motorola? Can I put Resurrection on my phone without the bootloader being unlocked? Again, i've been reading and trying to figure this out on my own without having to make a thread, so sorry if this wastes anybody's time, but I could really use some help.
Thank you very much in advance.
If your phone is contracted with Verizon .... They they will not allow you to unlock the bootloader
To install custom ROM , you must have custom recovery ( may be twrp)
To be able to install custom recovery, you must unlock your boot loader
So both is not possible right now if your phone is from Verizon
So you can not install custom ROMs
Keep eyes on the MZP thread for solutions
Hope this helps
Hi, my carrier purchased 'Lisa' came with its ROM showing as version RKOEUBY.
My carrier isn't keeping up with updates so was wondering if I can just flash the ROM RKOEUXM without unlocking the bootloader?
I have my banking apps etc on this phone so am reluctant to unlock the bootloader unless absolutely necessary.
If anyone else has found an easy way to solve this would be grateful for your feedback.
Many thanks
rockyrobin said:
Hi, my carrier purchased 'Lisa' came with its ROM showing as version RKOEUBY.
My carrier isn't keeping up with updates so was wondering if I can just flash the ROM RKOEUXM without unlocking the bootloader?
I have my banking apps etc on this phone so am reluctant to unlock the bootloader unless absolutely necessary.
If anyone else has found an easy way to solve this would be grateful for your feedback.
Many thanks
Click to expand...
Click to collapse
Hi !
The best way is to download the zip of your European ROM from the Xiaomi site and try to install it from the update utility in your phone's settings. If that doesn't work, you'll have to unlock your bootloader, install the ROM you want with the flash utility, and choose the relock option before the install starts. Then you will be on an official Xiaomi ROM, with your bootloader locked and you will have updates from Xiaomi and no longer from your operator.
Bill
Hi,
I confirm that manually flashing the European ROM does not work (in my case at least), so I am stuck on MIUI 12.5.6 with RKOEUSF ROM.
If anyone finds a way to upgrade to the official version without unlocking the bootloader, and therefore not breaking the warranty, I would be grateful if you could share it.
Thanks
Hi !
From the moment you want to install a new ROM, you have no choice but to unlock your bootloader. You can then reblock it. Afterwards, I don't know if the warranty is impacted because you go through the official unlocking from Xiaomi.
Bill
Thanks Bill,
I've just tried flashing the zip of my ROM and the phone just quits the update after a long pause, saying that it cannot verify update.
Guess I'll have to unlock the bootloader. There's plenty of info about how to do this, but I've noticed a number of people complaining about the flash process.
When they apply the update, at the end they get an error message. The only way they get round this is with an edit of the settings of miflash.
Is this something I need to worry about?
Just been reading about these errors and it appears that they are caused by the path to the ROM file having too many characters.
Placing the ROM file in your C: folder solves this.