Develop Bugs

[Q] Can't touch

Hello everybody,
I've got serious problems... my Kindle fire is rooted and installed CM7. But it can't touch anything some days ago.
Even I change to recovery mode to use TWRP, but I can't touch on Install, Backup, Restore... button anymore.
Is there any problem with the hardware? Or firm-ware problem? How can I solve it?
Please help me repair.
Thank you.
Duc

If you installed a twrp theme lately, delete the theme.
[Edit:] Or are you saying the touch controls won't work at all, even while booted normally?

Duplicate post. Delete

soupmagnet said:
If you installed a twrp theme lately, delete the theme.
Click to expand...
Click to collapse
Even when I use KFU 0.9.3 with TWRP 2.0.0, it still doesn't work

soupmagnet said:
[Edit:] Or are you saying the touch controls won't work at all, even while booted normally?
Click to expand...
Click to collapse
Correct. They won't work at all in normal mode and recovery mode.
In normal mode, I saw informations on widgets still worked such as weather, clock, battery percent... But the screen won't work when I touch.

Did you install any third party kernel outside of the rom you used?
When did the touch stop working? As soon as you installed the rom or sometime after? (Or, was your kindle ever working correctly?)
It's odd that the touch would stop working outright. I'm assuming you tried lock/unlocking the screen, it may bug out.
Try hard restarting the kindle by holding down the power button for >10 seconds.

go to sdcard/twrp/ delete the folder called theme then reboot

superxpro12 said:
Did you install any third party kernel outside of the rom you used?
When did the touch stop working? As soon as you installed the rom or sometime after? (Or, was your kindle ever working correctly?)
It's odd that the touch would stop working outright. I'm assuming you tried lock/unlocking the screen, it may bug out.
Try hard restarting the kindle by holding down the power button for >10 seconds.
Click to expand...
Click to collapse
Thanks for your suggestion, superxpro.
I've tried restart by holding the power button many many times but it won't work.
I didn't install any third party kernel, just CM7.
I has stop working some days ago. I don't use any app to lock/unlock screen.
I'm assuming that there was some apps automatic updated, it has bugs which conflicted with Kindle fire and make the it gone crazy.

Thepooch said:
go to sdcard/twrp/ delete the folder called theme then reboot
Click to expand...
Click to collapse
Hi Thepooch.
How can I delete that folder while I can't touch in normal and recovery mode both?
Is there any adb command which help me do this?

ducdale said:
Hi Thepooch.
How can I delete that folder while I can't touch in normal and recovery mode both?
Is there any adb command which help me do this?
Click to expand...
Click to collapse
Thepooch thinks you have a problem with TWRP themes that's preventing you from using TWRP. You're problem is more widespread.
Because your touchscreen doesn't work in any setting, normal or recovery, I'm fairly certain it's going to be a hardware issue. I'm almost positive you will not be able to fix this with software.
I had the same problem and had to send my unit back to Amazon for replacement.

kinfauns said:
Thepooch thinks you have a problem with TWRP themes that's preventing you from using TWRP. You're problem is more widespread.
Because your touchscreen doesn't work in any setting, normal or recovery, I'm fairly certain it's going to be a hardware issue. I'm almost positive you will not be able to fix this with software.
I had the same problem and had to send my unit back to Amazon for replacement.
Click to expand...
Click to collapse
Hi kinfauns.
Is Amazon still replace other one even when my kindle rooted and up rom?

ducdale said:
Hi kinfauns.
Is Amazon still replace other one even when my kindle rooted and up rom?
Click to expand...
Click to collapse
They send you a replacement first and you have to send yours back. If you're asking if they would charge you for the replacement because you sent back a modified Kindle Fire, I don't have any idea. You'd have to ask someone who's sent a non-stock unit back to Amazon.

kinfauns said:
They send you a replacement first and you have to send yours back. If you're asking if they would charge you for the replacement because you sent back a modified Kindle Fire, I don't have any idea. You'd have to ask someone who's sent a non-stock unit back to Amazon.
Click to expand...
Click to collapse
Thanks kinfauns.
But I still hope there is some ways to fix it by software. Because I'm in Vietnam and I bought from a man who bring this kindle from US, it's really complicated if I need to send back to Amazon.

ducdale said:
Hi Thepooch.
How can I delete that folder while I can't touch in normal and recovery mode both?
Is there any adb command which help me do this?
Click to expand...
Click to collapse
Hi,
adb command
adb shell
#cd twrp
#rm theme
Click to expand...
Click to collapse

repaired!!!!!
Hello everybody,
I'm very excited now my Kindle has been repaired!!!!!
I was download Kindle Unbrick UtilityV1.1 and play with it a little bit, clear user data, clear cache... then return to KFU and install TWRP again, suddenly it worked when I touch to Reboot button
Then, I reboot in recovery mode again and all TWRP button worked. (dance)
I was reinstall CM7, it running very smoothly now.
Thanks for all your supporting!!!!
Duc

ducdale said:
Hello everybody,
I'm very excited now my Kindle has been repaired!!!!!
I was download Kindle Unbrick UtilityV1.1 and play with it a little bit, clear user data, clear cache... then return to KFU and install TWRP again, suddenly it worked when I touch to Reboot button
Then, I reboot in recovery mode again and all TWRP button worked. (dance)
I was reinstall CM7, it running very smoothly now.
Thanks for all your supporting!!!!
Duc
Click to expand...
Click to collapse
I don't want to knock you down from your high when your device is working again, but the same thing happened to my device as well. The touch interface suddenly started working again, but after a few days it died once more and never came back.
I can assure you that there's nothing magical in the unbrick utility that would fix your malfunctioning touch screen. It's just coincidence that it happened that way. I'm glad the device is working again, but you should be prepared for another fight with the touchscreen. It may be coming soon.

Nasty Bootloop after Flash on Sprint G2

Last night I installed geefree on my phone from the app store and used it to install TWRP. I downloaded a nightly CM11 and an appropriate gapps. Using geefree I rebooted to recovery (never figured out the button combination to boot to recovery "naturally") and installed both of the zips. This could be where I made my mistake, I installed both at the same time.
Now my phone loops, displaying the LG logo for a few seconds, then shutting off and rebooting before repeating the process. I can't seem to get it to go into download mode or the recovery menu. I've tried power+up, power+down, down+up and each of those while plugging the device in, etc. I can get the device to a hardware key control mode, though it doesn't seem too useful.
How can I save my phone? This forum has been a great resource in the past and I'm very grateful for the many tutorials I've followed rooting other devices. Hopefully you guys can save the day once again!

Volume up plus power is how to access recovery on sprint.
What stock sw version were you on before you flashed cm?
Did you wipe data before flashing?
Sent from my LG-LS970 using xda app-developers app

I was using stock 4.2.2, I believe. I didn't wipe the data (shame on me), a bad habit that I picked up from my first rooted device, the Samsung Moment. It didn't ever matter on that one, afaik. Thanks for the reply!
Edit: Volume up and power whether plugged in or not takes me to the hardware key control mode screen.
Second Edit: http://forum.xda-developers.com/showthread.php?t=2432476&page=35 I also found this thread where someone seems to be experiencing similar issues and they fix it with "LG Utility." Is that a PC application? It's a little vague to google, but I've been trying!

I have a bootloop issue every time i flash a rom i have to wipe all but sd flash roms and gapps the i do a restore from twrp and oly restore my boot image only and they boot no prob

I'm kind of starting to suspect my power button doesn't work at all for whatever reason. I have a lot of difficulty getting the phone to shut down, then it doesn't seem to easily power up. It's a strange collection of problems. Would a Sprint repair place be able to fix this?

If they have parts on hand if not either a swap out or a sendoff

Same problem here - bootloop and no download mode - CWM works! - urgently need help
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?

Device is recognized but can´t be mounted - bricked forever?
Parinibbana said:
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Click to expand...
Click to collapse
I tried a few things on Linux.
After terminal-command "ls /dev/sd*" when the device is unplugged from the computer I get "/dev/sda".
When the device is connected via USB, I get: "/dev/sda /dev/sdb"
So sdb is my LG G2.
So I went on to the next command: "gdisk -l /dev/sdb"
As a result I get: "Problem opening /dev/sdb for reading! Error is 123."
Does it mean that the phone isn´t mounted or what? Now I´ve connected my phone to another Linux machine with the same result. It is recognised (p.e. as sdd), but there is no sdd1. Seems as if it is recognized, but can´t be mounted. Does that mean my device is bricked for good? That´s it?

to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb into the phone first then hold VOL+ and plug into usb port on the computer.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, it will shut off eventually!!
plug the phone in while in download mode to install drivers and set com ports, then unplug before you begin your flash with LGFlashTool, hope this helps you out.

Cronic2009 said:
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb in first then hold VOL+ and plug into usb port.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, hope this helps
Click to expand...
Click to collapse
Thanks Cronic2009 for your advice.
There are, however, szenarios where download-mode is not accessible any more. Neither by using the hardware-keys, nor by using the adb-command.
After four days of resarch and a lot of trial and error, I finally unbricked my F320L using the two adb-commands outlined at the beginning of that thread: http://forum.xda-developers.com/showthread.php?t=2451696
Worked like a charm.
Thanks everyone for your advice.

no problem buddy, glad you got it figured out, good luck to you from here on out!
FYI, that link doesn't work
I just wanted to ask anyone who might know, since the bootloader of the LS980 is locked, we cannot "break" this correct, so no matter what commands we decide to run through root, we cant touch the true bootloader there for LS980 fail safe? (Besides Acts of God, EMP, ect)

Cronic2009 said:
no problem buddy, glad you got it figured out, good luck to you from here on out!
Click to expand...
Click to collapse
Thanks for letting me know. I corrected the link in my previous post.

Be sure if you use a aosp based rom to flash the ZV8 modem. Your can use dr87 or furnance kernals after you flash the zva modem althought i have encountered soft brick due to this.

so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410

pitbullmommy45245 said:
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
Click to expand...
Click to collapse
Thank You for sharing you fixed your issue pittbullmommy but the link you posted points back to a post about a failed run on LGFlashTool, will you please fix the link and point it to the post/guide you used to fix your phone, it may help others stuck in a similar situation, glad to hear you got it fixed and working, best of luck with it from here on out!

Hi all
was just about to start a new thread but didn't want to get into trouble..anyway I am in need of some assistance please.my ls980 has been bricked for some time now been searching all over the internet for a solution to be stuck back at square one.found this video on youtube which is pretty much exactly what my phone is doing.I have used lg flash tool to revert to stock and still nothing I lost root doing that but last night,I managed to regain root access I have no idea how but it happened when i clicked ioroot batch file i went into download mode and it stated bottom left ROOTED in red so i managed that but that is it still doing what is being shown in the video its on youtube
watch?v=PjLF-pBhZSY
please if anyone has the know how I would like to fix this phone rather then bin it thank you all happy 4th everyone

After using tot and flash tool to get back to stock, did you try going into stock recovery and do a factory data reset? I know it sounds stupid especially after a tot but try it. Couldn't hurt
Sent from my LG-LS980 using Tapatalk

Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!

Yes sir I've tried that and more to no avail is there anything I can do through adb I'm on stock recovery phone doesn't stay on long enough to install anything

sarfdawg said:
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Click to expand...
Click to collapse
You ever get her fixed?

Have I bricked my fire tv?

Hi there. My fire TV is rooted and has the following installed:
clockwork mod custom recovery
51.1.4.0_514006420 updated 10/30/2014 Custom rom
I was initially experiencing strange behaviour with my external hard drive converting to a read only drive after a while for no apparent reason so decided to do a factory restore
I tried to factory restore the device but for some reason after the factory restore and watching the funny cartoon on set up the device said I only had 2.5gb of hard drive space left of the 5.5 gb available so I decided to try formatting the data on the clockwork mod restore but it still didn't work so I then formatted the sd but as soon as I did this I thought that can't be right as surely the recovery image is on that but it was too late. After it rebooted the fire TV no longer works. It just hangs on the White amazon logo. I've tried the "ALT-PRNT SCREEN-I" option to try get it to restore but with no luck, it just constantly stays on the White amazon logo so I'm kinda thinking I've totally wiped the fire TV and have therefore bricked it. It does respond to "control-alt-delete" but that just reboots the device.
Can anyone advise if this is indeed the case so I don't waste any of my time trying to fix this. I can't return the product as I purchased it on a recent holiday to usa and I'm from uk so a bit gutted.
Many thanks in advance
Paul1672

Sounds like you wiped your /system. If so, then yes you are soft bricked.

I have soft bricked this unit before and managed to restore it but that was before I installed the clockwork mod and custom rom.
If it is soft bricked surely I would be able to restore it still? I have tried several times to get it to return to the clockwork mod restore using the "ALT-PRINTSCREEN-i" method but all I get is the constant white Amazon logo. It feels like I've totally wiped the entire system including all sign of clockwork mod
Can anyone advise if I have indeed totally messed it up or is there any hope for me?
Paul

Anybody got any advice or opinion be it good or bad?
Before I bin the unit
Paul

Paul1672 said:
Anybody got any advice or opinion be it good or bad?
Before I bin the unit
Paul
Click to expand...
Click to collapse
Yes, I have some advice. Don't do that crap again. Be smart. And I'm a bit curious, you talk about an external harddrive and you then talk about wiping the SD card. You mean the /sdcard directory in the AFTV? Seriously? If that is the case, I have some better advice for you. Don't tinker with stuff you don't understand.

So I can assume from your reply I have indeed wiped the entire system and there is in fact no way to repair/restore the device? Totally agree with all you said and I did realise my error literally as soon as I did it a harsh lesson learnt I think and believe me it's not one I will be repeating.
Was just hoping I may be lucky and find someone who has a way of solving my issue but it appears not
Paul

Hi
What's your suggestion or advice be to resolve the problem that was presented.
Cheers
nyder said:
Yes, I have some advice. Don't do that crap again. Be smart. And I'm a bit curious, you talk about an external harddrive and you then talk about wiping the SD card. You mean the /sdcard directory in the AFTV? Seriously? If that is the case, I have some better advice for you. Don't tinker with stuff you don't understand.
Click to expand...
Click to collapse

Paul1672 said:
So I can assume from your reply I have indeed wiped the entire system and there is in fact no way to repair/restore the device? Totally agree with all you said and I did realise my error literally as soon as I did it a harsh lesson learnt I think and believe me it's not one I will be repeating.
Was just hoping I may be lucky and find someone who has a way of solving my issue but it appears not
Paul
Click to expand...
Click to collapse
Naw, you didn't brick you device. Sorry, was in some sort of mood when posted.
http://www.aftvnews.com/how-to-unbr...ry-mode-and-factory-reset-the-amazon-fire-tv/
That link gives information. You need to get into recovery mode and a factory restore. If the factory restore doesn't work, then just use the same firmware you had before you deleted the stuff. You can put any firmware on a usb stick and read it from that.
Most of this has been covered in the various threads, I suggest you browse thru them, lots of good stuff.
good luck, and sorry I didn't include this in my last post, i should of.

Are u sure mate? I've tried the Alt-prntscreen-I method without any success. The fire tv won't boot into the clockwork mod recovery at all and I'm wondering if I've formatted it somehow. I guess until I get into the restore screen I can't do a thing I did have clockwork mod installed and a custom rom, wud that make a difference as I did indeed format the fire tv sd partition.
Appreciate your help
Paul

Paul1672 said:
Are u sure mate? I've tried the Alt-prntscreen-I method without any success. The fire tv won't boot into the clockwork mod recovery at all and I'm wondering if I've formatted it somehow. I guess until I get into the restore screen I can't do a thing I did have clockwork mod installed and a custom rom, wud that make a difference as I did indeed format the fire tv sd partition.
Appreciate your help
Paul
Click to expand...
Click to collapse
You should be able to get to a recovery screen from what you did, I would think, unless maybe if you deleted everything from the root directory, not the sdcard directory. I am not an expert on that though. It's our thanksgiving holiday here in the states, so the peeps that know might not be around.
Sorry I can't be more helpful then that.

You copy your recovery.img to the sdcard only as an interim step for flashing. It then gets stored in a separate partition that CWM won't wipe. If you have done the changes you mention from CWM, then CWM is still present on the device. I had to get in to my system with the alt-prtscreen-I method as well, and it took a few tries, spamming the keeps after unplugging and replugging the device. Also if you are using a k400 or some other keyboard with a FN key you may have to push that as well to make sure it gets the proper key sequence. I'm fairly confident your device is only softbricked and can be recovered. you may need to adb sideload or copy a zip to usb to load the firmware, but it should be doable.

well, I've tried constantly rebooting and pressing alt-printscreen-I simultaneously for the last half hour with no luck wotsoever all I get is the constant white amazon logo. in fact, the logo appears as soon as I connect the power lead and just hangs there until I either remove the lead or press control-alt-delete at which point the device reboots.
something tells me I've done something a lot more serious than just wipe the sd partition but I'm a little surprised if clockwork mod would allow it.
kinda giving up now as I have soft bricked the device before but that was before I installed clockwork mod and it went to factory restore just fine doing the alt-printscreen-i method that time.
thanks for all the advice guys. I really do appreciate any help I have had. I'm willing to try anything to try get this unit to work. the way I see it, I have nothing to lose right now. just seems strange the unit no longer shows any sign of changing from the constant white amazon logo. there's definitely no sign of the colourful amazon logo that usually appears at some point during the boot process which kinda gives me the impression I've somehow completely wiped the whole system.
is that even possible guys?

If you are saying that ctrl-alt-del reboots your box then the alt -sysrq-i should get you to recovery. Try using a wired keyboard and maybe a different keyboard than you have been using.

Ive tried a wired keyboard and now when I press ALT-PRNTSCREEN-i the fire tv just reboots. I've followed the guide that is in a previous reply which I have been able to do on a previous unrelated soft brick I managed but this time each time I do the ALT-PRINTSCREEN-i combo it just reboots and nothing else. Just a white AMAZON logo. I have done the method like 5 times and still no joy

Paul1672 said:
Ive tried a wired keyboard and now when I press ALT-PRNTSCREEN-i the fire tv just reboots. I've followed the guide that is in a previous reply which I have been able to do on a previous unrelated soft brick I managed but this time each time I do the ALT-PRINTSCREEN-i combo it just reboots and nothing else. Just a white AMAZON logo. I have done the method like 5 times and still no joy
Click to expand...
Click to collapse
Call Amazon and play stupid saying it just hangs at the logo, I did that once and they send me a replacement free of charge.

Wish I could but i purchased it whilst on holiday in Florida and I'm from the uk

Anybody got any more advice? It seems really strange that I can't get the factory reset to work. Still stuck on the White Amazon logo which boots instantly as soon s I power the device. I've managed to get the device to power cycle using ALT-PRNTSCREEN-i method bit it's does it going on 20 times with absolutely no sign of the failed update screen so it looks like the device just doesn't have anything on it. Is it possible I've somehow completely wiped the clockwork mod recovery? And if I have shud the device revert back to factory restore or may I of wiped that too?

Paul1672 said:
Anybody got any more advice? It seems really strange that I can't get the factory reset to work. Still stuck on the White Amazon logo which boots instantly as soon s I power the device. I've managed to get the device to power cycle using ALT-PRNTSCREEN-i method bit it's does it going on 20 times with absolutely no sign of the failed update screen so it looks like the device just doesn't have anything on it. Is it possible I've somehow completely wiped the clockwork mod recovery? And if I have shud the device revert back to factory restore or may I of wiped that too?
Click to expand...
Click to collapse
no its not possible that you wiped recovery from what you did in cwm.. its located on a different partition, if you cant connect via ADB or cant get recovery to load your out of luck.. so did you install the newest prerooted rom? what about the boot menu?

I had the following pre-rooted rom installed:
51.1.4.0_514006420 updated
Sounds like I've messed it up then

Paul1672 said:
I had the following pre-rooted rom installed:
51.1.4.0_514006420 updated
Sounds like I've messed it up then
Click to expand...
Click to collapse
no need for the boot menu on that update iirc. i think you need to just keep trying to get to recovery, i think its still there.. the key command is just not registering.. keep trying i guess.

Anyone know how to fix a bricked FTV

Hi guys,
I have a problem with my firetv where it won't boot past the Amazon logo. This happened after restarting the system when I installed firetv Boot Menu.
Any help would be welcomed

Sorry I'm not likely to have a fix, but are you sure you unlocked boot loader before attempting to install the boot menu? This could be the cause for the brick.
Are you able to boot to recovery? If so you might be ok. I VERY TENTATIVELY say that if you can get into recovery from there either a factory reset or reflashing a prerooted fw might help BUT if you're able to get there PLEASE don't proceed till someone with more experience chimes in!
I will say that there's hope if you can get to recovery... probably? But this never happened to me.
Have you tried restarting with usb keyboard attached and pressing the print alt screen? Good luck.

Phill360 said:
Hi guys,
I have a problem with my firetv where it won't boot past the Amazon logo. This happened after restarting the system when I installed firetv Boot Menu.
Any help would be welcomed
Click to expand...
Click to collapse
hi,
I am not an expert on this matter but you should provide detail info exactly what you did to your Fire TV, the exact steps and sequence so folks can help you better.
In the meantime, check these all link out before you do anything. It seems few folks has some success see link 2 and 3 as always try it on your risk. I hope someone else can provide a better solution.
http://www.aftvnews.com/top-ways-to-brick-your-fire-tv/
http://www.aftvnews.com/how-to-unbr...ry-mode-and-factory-reset-the-amazon-fire-tv/
http://forum.xda-developers.com/showthread.php?t=2799779
http://www.aftvnews.com/factory-reset-on-amazon-fire-tv-and-fire-tv-stick-explained/
btw, if you are using amazon fire tv for xbmc as it seems most folks are using it for, i would just get Raspberry PI, it is awesome never had to worry about bricking the damn thing, sure it slower than fire tv but i have use it and i love it, it plays 1080 and 3d movies and no buffering either.
I also fire tv but i am always scared this thing will brick as it seems many folks have this problem.
Thank you

KLit75 said:
Sorry I'm not likely to have a fix, but are you sure you unlocked boot loader before attempting to install the boot menu? This could be the cause for the brick.
Are you able to boot to recovery? If so you might be ok. I VERY TENTATIVELY say that if you can get into recovery from there either a factory reset or reflashing a prerooted fw might help BUT if you're able to get there PLEASE don't proceed till someone with more experience chimes in!
I will say that there's hope if you can get to recovery... probably? But this never happened to me.
Have you tried restarting with usb keyboard attached and pressing the print alt screen? Good luck.
Click to expand...
Click to collapse
Thanks for the reply Klite, I didn't unlock the bootloader before installing the menu so that must have caused the brick.
I'm only able to see the Amazon logo, it does not reach the Fire TV Logo. I have plugged in a USB keyboard but i can't seem to get to recovery.

ashsha7877 said:
hi,
btw, if you are using amazon fire tv for xbmc as it seems most folks are using it for, i would just get Raspberry PI, it is awesome never had to worry about bricking the damn thing, sure it slower than fire tv but i have use it and i love it, it plays 1080 and 3d movies and no buffering either.
I also fire tv but i am always scared this thing will brick as it seems many folks have this problem.
Thank you
Click to expand...
Click to collapse
Hi Ashsha
I do mainly use my FTV for Kodi, I did previously use a Raspberry Pi but i bought this to replace it as i wanted something more powerful due to the problems i was having with stutters during play back.
Thanks for the links too, i did try them but i have had no luck so far.

Does anyone know if it possible to unbrick my FTV via USB using Fastboot or ADB?

Phill360 said:
Hi guys,
I have a problem with my firetv where it won't boot past the Amazon logo. This happened after restarting the system when I installed firetv Boot Menu.
Any help would be welcomed
Click to expand...
Click to collapse
Phill360 said:
Does anyone know if it possible to unbrick my FTV via USB using Fastboot or ADB?
Click to expand...
Click to collapse
That's a very good question. I know it's pretty much essential to unbrick a kindle fire but can't find any info specific to aftv. But you're motivation to get an answer is greater than mine. Do you have one?
I'd be confident in trying it with a phone or tablet but I just don't know enough about the variables (like could you do more damage sending power to somewhere that has an external power source)
My best advice is to be patient, keep looking for possible fixes online, but I'd caution not to experiment. Instead keep coming back here to get thoughts on possible fixes that might work. At the very least your thread will stay high in the forum search results giving you a better chance of having the right xda member to notice it.

KLit75 said:
That's a very good question. I know it's pretty much essential to unbrick a kindle fire but can't find any info specific to aftv. But you're motivation to get an answer is greater than mine. Do you have one?
I'd be confident in trying it with a phone or tablet but I just don't know enough about the variables (like could you do more damage sending power to somewhere that has an external power source)
My best advice is to be patient, keep looking for possible fixes online, but I'd caution not to experiment. Instead keep coming back here to get thoughts on possible fixes that might work. At the very least your thread will stay high in the forum search results giving you a better chance of having the right xda member to notice it.
Click to expand...
Click to collapse
If you didn't follow the directions and didn't unlock, then it is bricked and the only way to fix it is the hw mod to write to the mmc. If you have an A to A plugged in, on boot it'll stop in the bootloader and fastboot will work, unfortunately there is no commands you can actually run that will do anything. If you don't have an A to A plugged in, it will try to load the boot image. Since you didn't unlock, it won't boot the image, and it'll just die.

if all else fails, you can always go to amazon for replacement, remember amazon fire tv hasn't been a year old yet and you still have warranty for it, thats what i did with mine, i acted i didn't know what i was doing and suddenly it wouldn't load or boot up, etc.. u will need to know ur email adress or account thats associated with ur fire tv.. op korz .. they will do it... 100%

rbox said:
If you didn't follow the directions and didn't unlock, then it is bricked and the only way to fix it is the hw mod to write to the mmc. If you have an A to A plugged in, on boot it'll stop in the bootloader and fastboot will work, unfortunately there is no commands you can actually run that will do anything. If you don't have an A to A plugged in, it will try to load the boot image. Since you didn't unlock, it won't boot the image, and it'll just die.
Click to expand...
Click to collapse
Thanks for the reply rbox.
So what your saying is my Fire TV is dead.
I might just move on then to a new device like the Razor Forge TV when that comes out.
daffung said:
if all else fails, you can always go to amazon for replacement, remember amazon fire tv hasn't been a year old yet and you still have warranty for it, thats what i did with mine, i acted i didn't know what i was doing and suddenly it wouldn't load or boot up, etc.. u will need to know ur email adress or account thats associated with ur fire tv.. op korz .. they will do it... 100%
Click to expand...
Click to collapse
I'd love to return my FTV under warranty but i live in Australia and can't be bothered paying for postage to get it replaced

Just wondering if anyone has worked out a way of fixing this type of Brick?
Not sure was version of the software on, I'm hoping that it might be on 51.1.6.1 or 54.1.2.1
thanks

Phill360 said:
Just wondering if anyone has worked out a way of fixing this type of Brick?
Not sure was version of the software on, I'm hoping that it might be on 51.1.6.1 or 54.1.2.1
thanks
Click to expand...
Click to collapse
Depending on how much of the instructions you actually followed, and if your bootloader is 51.1.0.2 or older, there is a method that @AFTVnews.com is working on a writeup for that should recover it. But if the bootloader wasn't downgraded to 51.1.0.2, then it's dead.

How do you hard shut down and then get into recovery?

I got stuck at the boot screen with no OS installed.
Google is finding me ways to reboot but can't find anything on how to do a hard shutdown from here.
EDIT:
Okay one suggestion was to plug the phone into charge, then force a reboot (power + both volume buttons held down 10+ seconds).
Then when it shuts off, you disconnect the power cable after seeing a "battery" on the screen and the tab will remain turned off.
That did not work for me with computer data charging cable.
But it did work with the stock charger. :good:
This helped me get into download using the download mode button shortcuts. But I can't figure out how to get into recovery mode from here? The recovery mode buttons don't work (volume up + power + home).

It looks like this thread has the answer on how to get into recovery mode again.
Too bad I didn't find it before I did an ODIN back to stock.
http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473

Actually its even easier than that and have done it countless times.
Next time just hold POWER +VOL DOWN + HOME. As soon as the screen goes blank change to VOL UP whilst still holding POWER +HOME.
Works every time to get into recovery.

ashyx said:
Actually its even easier than that and have done it countless times.
Next time just hold POWER +VOL DOWN + HOME. As soon as the screen goes blank change to VOL UP whilst still holding POWER +HOME.
Works every time to get into recovery.
Click to expand...
Click to collapse
Confirmed - this worked for me. Thanks!

I'm in the same situation where all of a sudden my tablet went into reboot and got stuck on the logo screen. I tried the combinations suggested such as : Power butto +Volume down then Volume up when screen is black to get to reboot mode but it just brings me back to the logo screen. Is there some other way I can access the safe mode or recovery mode to try and get this thing working again? I wasn't running any apps for it to cause this either, just checking email. Any help would be much appreciated

casual167 said:
I'm in the same situation where all of a sudden my tablet went into reboot and got stuck on the logo screen. I tried the combinations suggested such as : Power butto +Volume down then Volume up when screen is black to get to reboot mode but it just brings me back to the logo screen. Is there some other way I can access the safe mode or recovery mode to try and get this thing working again? I wasn't running any apps for it to cause this either, just checking email. Any help would be much appreciated
Click to expand...
Click to collapse
You're not following the instructions properly. Read post 3 again and hold ALL 3 buttons until recovery boots.
Do not let go of any of the buttons until you see the recovery screen.

ashyx said:
You're not following the instructions properly. Read post 3 again and hold ALL 3 buttons until recovery boots.
Do not let go of any of the buttons until you see the recovery screen.
Click to expand...
Click to collapse
Nevermind, I actually got it to work. What do I do after it says "downloading" to fix this issue of it not getting past the boot screen? Please help, I'm not too good with this kind of stuff

casual167 said:
Nevermind, I actually got it to work. What do I do after it says "downloading" to fix this issue of it not getting past the boot screen? Please help, I'm not too good with this kind of stuff
Click to expand...
Click to collapse
Well, downloading is not the recovery.
In download mode you would use ODIN to re-flash the firmware from a computer.
In recovery, you would do a factory reset to reset back to defaults to see if that helps boot back into the existing firmware. You'll probably lose everything.

CZ Eddie said:
Well, downloading is not the recovery.
In download mode you would use ODIN to re-flash the firmware from a computer.
In recovery, you would do a factory reset to reset back to defaults to see if that helps boot back into the existing firmware. You'll probably lose everything.
Click to expand...
Click to collapse
Yeah I just figured out I was in the wrong mode. I couldn't get it to the recovery mode for some reason but eventually it worked. So I have to go into wipe data/factory reset option? There's nothing else I can do on that screen to fix this without losing everything? I see other opions to Wipe Cache, reboot to bootloader, reboot system now etc..

casual167 said:
Yeah I just figured out I was in the wrong mode. I couldn't get it to the recovery mode for some reason but eventually it worked. So I have to go into wipe data/factory reset option? There's nothing else I can do on that screen to fix this without losing everything? I see other opions to Wipe Cache, reboot to bootloader, reboot system now etc..
Click to expand...
Click to collapse
Well, you're not really giving enough info for us to properly help you.
If you have stock recovery then you can try clearing cache but it probably won't fix a no-boot situation.
If you have TWRP recovery then you can try clearing cache and dalvik and fix permissions which probably won't help but gives you a better chance.
Also, if you had TWRP then you could simply re-flash your ROM zip and not lose a whole lot.

CZ Eddie said:
Well, you're not really giving enough info for us to properly help you.
If you have stock recovery then you can try clearing cache but it probably won't fix a no-boot situation.
If you have TWRP recovery then you can try clearing cache and dalvik and fix permissions which probably won't help but gives you a better chance.
Also, if you had TWRP then you could simply re-flash your ROM zip and not lose a whole lot.
Click to expand...
Click to collapse
Sorry about that. It's like I said, I'm not too inclined on this type of stuff. Here's what I got and hopefully it helps you more. The tab is completely stocked, never rooted because I wouldn't even know how to do that really. I was on it fine last night and all I did was put it down for literally 30 sec to get something to drink and when I came back it was stuck on the Samsung logo screen. Only apps I had open was gmail, chrome and a word document. There was nothing dowloading, system wise or apps. It's already had Lollipop on it for a week or two and I didn't get any update notices or anything. So I'm guessing the problem is it's somehow stuck in a "boot loop" from what I found searching on google and I don't understand why or what could be causing it so that's the issue I'm trying to fix. I can't get past that screen no matter how many times I restart it. Does that help some?

casual167 said:
Does that help some?
Click to expand...
Click to collapse
Yeah, so unfortunately your options are very limited and you're kinda stuck with losing everything.
Try clearing cache first but I doubt it will help.
Then reset to factory defaults. That should work and you probably lose everything.
If not, then search this forum for "ODIN" and "firmware" or let me know and I'll guide you when I get back to my computer in a couple hours.

CZ Eddie said:
Yeah, so unfortunately your options are very limited and you're kinda stuck with losing everything.
Try clearing cache first but I doubt it will help.
Then reset to factory defaults. That should work and you probably lose everything.
If not, then search this forum for "ODIN" and "firmware" or let me know and I'll guide you when I get back to my computer in a couple hours.
Click to expand...
Click to collapse
Ok I'll give that a try, thanks. Should I take out my SD card before I reset everything
---------- Post added at 04:52 PM ---------- Previous post was at 04:15 PM ----------
casual167 said:
Ok I'll give that a try, thanks. Should I take out my SD card before I reset everything
Click to expand...
Click to collapse
So I did the factory reset, it started up now and it's as if I just took it out of the box. Unfortunately I'm at work though so I can't connect to a wifi to complete the set up process so I'll have to wait until tonight when I get home but thanks again for your help. If you could still help me later though with the Odin and firmware stuff I would appreciate it.

casual167 said:
So I did the factory reset, it started up now and it's as if I just took it out of the box. Unfortunately I'm at work though so I can't connect to a wifi to complete the set up process so I'll have to wait until tonight when I get home but thanks again for your help. If you could still help me later though with the Odin and firmware stuff I would appreciate it.
Click to expand...
Click to collapse
The factory reset should not touch the external SD card at all. So no worries about leaving it in during that process.
Yeah, starting over.
As long as you're doing that, this is a great time to flash a rooted ROM so you can install Titanium Backup and do regular backups of your apps in case you ever need to reset to factory again.
What model tab do you have? Like, mine is a T705.
If it's an LTE tab, who is your carrier?
The ODIN process depends on this info.

CZ Eddie said:
The factory reset should not touch the external SD card at all. So no worries about leaving it in during that process.
Yeah, starting over.
As long as you're doing that, this is a great time to flash a rooted ROM so you can install Titanium Backup and do regular backups of your apps in case you ever need to reset to factory again.
What model tab do you have? Like, mine is a T705.
If it's an LTE tab, who is your carrier?
The ODIN process depends on this info.
Click to expand...
Click to collapse
So I left for lunch and tablet was functional and in the set up process and when I came back, it's back at that damn Samsung logo screen and haven't been able to get back to the recover page. Any idea or suggestions on what to do now? How could that same problem still be here if I did the factory reset?
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
casual167 said:
So I left for lunch and tablet was functional and in the set up process and when I came back, it's back at that damn Samsung logo screen and haven't been able to get back to the recover page. Any idea or suggestions on what to do now? How could that same problem still be here if I did the factory reset?
Click to expand...
Click to collapse
Actually, I just got into the recovery page now
---------- Post added at 07:02 PM ---------- Previous post was at 07:00 PM ----------
What should I do ?

CZ Eddie said:
What model tab do you have? Like, mine is a T705.
If it's an LTE tab, who is your carrier?
The ODIN process depends on this info.
Click to expand...
Click to collapse
casual167 said:
How could that same problem still be here if I did the factory reset?
Click to expand...
Click to collapse
Who knows, something is not happy though.
You could try another reset.
Is your battery greater than 50%?
Under a certain percentage, the battery savings feature could possible do weird things.

CZ Eddie said:
Who knows, something is not happy though.
You could try another reset.
Is your battery greater than 50%?
Under a certain percentage, the battery savings feature could possible do weird things.
Click to expand...
Click to collapse
Lol yea no kidding. The battery has been plugged in the whole time. I'm actually at 100% now. I was really trying to avoid having to bring it to Geek squad. If I do the reset and it does it again, will going to the download mode and doing the custom OS help at all?

casual167 said:
If I do the reset and it does it again, will going to the download mode and doing the custom OS help at all?
Click to expand...
Click to collapse
Unless it's a hardware issue, then re-flashing the firmware via ODIN could definitely help!
You can ODIN the stock, unrooted firmware or you can ODIN a TWRP recovery and flash any ROM you want for your phone.
Would still need to know the model # I asked for a couple times above.

CZ Eddie said:
Unless it's a hardware issue, then re-flashing the firmware via ODIN could definitely help!
You can ODIN the stock, unrooted firmware or you can ODIN a TWRP recovery and flash any ROM you want for your phone.
Would still need to know the model # I asked for a couple times above.
Click to expand...
Click to collapse
My bad, its SM-T800
---------- Post added at 08:02 PM ---------- Previous post was at 07:46 PM ----------
Leaving now but I'll be back in a couple hrs

casual167 said:
My bad, its SM-T800
Click to expand...
Click to collapse
Okay great, so you can ODIN a TWRP recovery and then flash a nice ROM. Same ROM I use on my phone. It's stock Touch Wiz that has been rooted and some small things have been improved. Very stable. IronROM.
Or you can download the stock firmware from sammobile.com and ODIN back to stock.