Related
Introducing Trickster MOD, bringing Trickster experience to virtually every ROM out there.
Users using Trickster ROM 1.2.1 or newer can use this MOD to update
This CWM zip include the binaries and scripts I used for optimization in Trickster ROM. What it can do/set:
- Zipalign and sqlite DB optimization at boot
- Some android properties tweaks with mobile network speed tweak
- Screen state optimization for kernel task scheduler and virtual memory management (ch33kybutt)
- Set I/O scheduler, read ahead buffer, CPU scaling governor, min and max CPU speed
Following features are dependent on kernel features:
- Color (applied by default), contrast and gamma tweaks
- Generic hotplug
- CPU Temp limit
- Minimal SmartReflex voltage of Core, IVA, and MPU domains
- Nominal SmartReflex voltage for Core, IVA, and MPU domains
- Regulator voltages
- GLaDOS live OC of Core, GPU and MPU
- WIFI mode for screen off (power saving or full speed)
- Vibrator strength
- Headset volume boost
- High performance sound
- Force fast charge
- Battery live extender
- Touch wake and touch wake duration
- fsync control
Download
Trickster MOD 20120709
Control App
Changelogs
Requirements:
- CWM
- Someone who understands instructions below
Installation/Update instructions:
- Reboot to CWM recovery
- Do a nandroid if you're scared (recommended in case you have problem)
- Install zip from sdcard
- Reboot the phone
- If you see /sdcard/trickster directory with configuration files inside then this mod installed successfully
Usage:
By default Trickster color, some android property regarding UI smoothness and mobile data speed tweaks and screen state optimization are applied. If you want to change additional settings then either use the app or :
- Go to /sdcard/trickster directory, you'll see at most four following configuration files, depending on kernel features:
. color.conf: color related tweak
. general.conf: generic tweaks like zipalign, sqlite, and screenstate optimization
. kern_general.conf: generic kernel tweaks like CPU speed, governor, IO scheduler and readahead buffer
. kern_specific.conf: specific kernel features like sound control, WIFI power, fast charge... - Edit any above file to change the settings you want using app like ES Explorer, Root Explorer..., instructions included inside
- Settings are automatically applied when user saves any of these files
- Some changes require restarting your phone
- To check log to see if it works use "logcat|grep Trickster" from adb/terminal
Reinstall boot service, Reset settings, Removal instructions:
- If you install a new kernel that includes ramdisk (boot.img format like franco or leanKernel), you can either reinstall Trickster MOD, run "tricks install" from adb root shell or terminal, or apply this CWM zip from recovery.
- You can delete a configuration file, files, or entire /sdcard/trickster directory to reset to default settings for a file, files or all configuration respectively
- If you mess up and can't boot, say aggressive OC/UV , use this CWM zip to reset
- If you want to uninstall, use this CWM zip
Credits:
- Google
- Our great kernel devs
- chainfire for SuperSU and su
- stericson for busybox
- ch33kybutt's for his brilliant idea on screen state optimizations
- Beta testers for your dedication in testing this
- nexus.prime for his unintallation script
- phone_user for init.d CWM zip
- Anyone I learnt from
Disclaimer: This is provided with NO GUARANTY whatsoever. Use your common sense.
Beta test: If you want to test my stuffs, including other things beside this. Contact me through PM.
This is interesting.
Sent from my Galaxy Nexus
Just wondering if the Trickster Rom is for the Nexus? If it is then where can we try it out, thanks.
smoothone said:
Just wondering if the Trickster Rom is for the Nexus? If it is then where can we try it out, thanks.
Click to expand...
Click to collapse
It is but it's for the GSM Galaxy Nexus as I made it from google IMM76I image, it does not work on toroplus.
bigeyes0x0 said:
It is but it's for the GSM Galaxy Nexus as I made it from google IMM76I image, it does not work on toroplus.
Click to expand...
Click to collapse
So if I where to put this mod on an aosp rom it would be like the actual trickster rom?
Sent from my Galaxy Nexus
Yes, nearly identical. The remaining mod is dalvik-cache in cache partition which free up space for your virtual sdcard. And the other is Zeppelinrox's supercharged services.jar for better multitasking.
bigeyes0x0 said:
Yes, nearly identical. The remaining mod is dalvik-cache in cache partition which free up space for your virtual sdcard. And the other is Zeppelinrox's supercharged services.jar for better multitasking.
Click to expand...
Click to collapse
Thanks for the input.
Sent from my Galaxy Nexus
The values in script are listed ad "binary". Is that what needs to be imputed to activate that particular mod? And the specific integer in those mods? Thnx in advanced r
wow! nice to see this,thanks for sharing
dangambino said:
The values in script are listed ad "binary". Is that what needs to be imputed to activate that particular mod? And the specific integer in those mods? Thnx in advanced r
Click to expand...
Click to collapse
Binary as in 0 and 1 to disable and enable respectively. I thought that is obvious.
So if you want to enable feature named X just set X=1
New version in first post. Remove requirements for init.d and busybox and it has some tweaks to tricks script.
Does anyone know if this will work on paranoid android?
I heard someone flash it successfully. To be sure just do a nandroid before hand.
Question, does it work with rooted stock?
Thanks!
It's only requirements are root and CWM, the next version might not even need root (in private testing), so you can use it on your ROM, sure.
Thanks!
Ok I'm retarded or something... i can't figure this out. Anyways, this is my question... I flashed the zip with cwm, does that mean its working now? Or do I have to use the terminal stuff it said in the Usage section and if I do, how exactly do I do that?
Thanks!
spykedvodka said:
Ok I'm retarded or something... i can't figure this out. Anyways, this is my question... I flashed the zip with cwm, does that mean its working now? Or do I have to use the terminal stuff it said in the Usage section and if I do, how exactly do I do that?
Thanks!
Click to expand...
Click to collapse
I actually have the same question.
If you see directory /sdcard/trickster with file trickster.conf inside after installing through CWM, then it should work. To change settings modify trickster.conf, but you don't really need to if you don't want/need to change settings. The default is good enough in general.
New version released with some nice goodies. Read changelog.
lately I've found that some people are looking for more tweaks for SGY. you might have heard about v6 and adrenaline engine which can boost up our device performance. however, these script are usually only change the setting on memory management and kernel setting. I can't found a branded tweak with a script not only for memory management but also tweak gps, net speed, and build.prop properties tweak.
well...this mod is an one pack tweak for all that stuff. it contain all init.d tweak which used daily in my device. don't worry about the modules stuff since I already put them inside.
1. tweaks for modules : droidwall modules by mikstev and bacem patch by irfanbagus
2. tweaks for memory management : kuro1
3. tweaks for build.prop properties : kuro2
4. tweaks for net speed : sysinit --> sysctl tweaks
5. additional tweaks : zipalign, sqlite optimize, minfree, data cleaner, sdcard tweak (these last four are in kuro1), and gps tweaks.
6. add blocker tweak (new)
important notes:
1. this mod is only tested on SGY. please use it carefully if you intent to use it on another device.
2. installation guide: flash it via CWM.
3. I highly recommend to delete (or temporary move) all init.d script before install this mod (just in case, for your safety and to ensure that my tweak will run). you can put your favourite script later if the installation succes.
4. a kernel with init.d support is a minimum requirement for this mod.
5. to check whether if the tweak run or not go to /data and see if all of 4 log file tweak created there with correct time when you turn on your device.
- kuro_zalign.log : contain the log file for zipalign
- kuro_tweak1.log : contain the log file for kuro1 tweak
- kuro_tweak2.log : contain the log file for kuro2 tweak plus test for undervolt with bacem tweak
- kuro_slite.log : side log file for kuro1. it contain the log file for vacum tweak inside kuro1
the link :
]v1 : http://www.mediafire.com/download.php?51kxybm65dzxveb or http://d-h.st/7v7
v2 : http://d-h.st/AsD
v2.1 : http://d-h.st/HB4
v3.0 : http://www.mediafire.com/download.php?vv0e2nmzrnm7q3o
v3.1 : http://www.mediafire.com/download.php?9ua4lz8wafqq79w
note: don't install by copy all the files into your system. you only need to copy the 'blast' file in /system/bin/ to your /system/bin and give 777 permission to get the update.
add blocker : http://www.mediafire.com/download.php?2bqcgbkt01banl6
to install it, extract the file then copy hosts file to /system/etc. after that restart your phone.
changelog:
v1 (17-7-2012)
- first release project
v2 (8-7-2012)
- log system introduced. log file stored at /data as kuro_zalign.log, kuro_tweak1.log, kuro_tweak2.log and kuro_sqlite.log
- optimized. kickass kernel tweak now in kuro1.
- added some more tweak for memory cleaner and another stuff.
- loopysmoothness removed due some issue in some highly loaded system.
- GPS tweak now set for all region and country
v2.1 (21-8-12)
- new script added
- optimized tweak for better multitasking and speed
- now using aroma installer
v3.0 (4-10-12)
- new build script on kuro1
- separated sqlite vacuum (kuro4)
- new setprop code on (kuro2)
- new setprop code for audio (kuro3)
- NEW FEATuRE: boost_up MODE! --> a special feature to give you more free ram and boost your memory
v3.1 (12-12-12)
- new update for the tool. now you can use it without typing su.
- tool renamed to 'blast' to make it shorter.
Click to expand...
Click to collapse
additional note for v3:
- clear your dalvik cache after you install this tweak
- to use boost_up mode, type su, continued by boost_up in terminal
- THIS TWEAK ONLY TESTED ON MY XPERIA TIPO. PLEASE QUICKLY REPORT IF ANYTHING GOES WRONG.
for more information about the modules
bacem patch [irfanbagus] - http://forum.xda-developers.com/showthread.php?t=1640972
droidwall [mikstev] - http://forum.xda-developers.com/showthread.php?t=1626406
credits:
1. mikstev and irfanbagus for the modules
2. imbawind for the libncurses.so file
3. all xda member
I'm not a dev. all credits should be addressed to the dev, the real man behind the work. not me
Click to expand...
Click to collapse
TERM OF USE AND SHARING:
this thread intent is for sharing. feel free to use, edit, distribute all material inside this thread which came from me. if there any parts of this mod which comes not from me please refer to the original dev I've mentioned in this thread. if want to share it to another forum or modify it you don't have to ask my permission. no need to credits, put links or whatsoever. you'll only need to remember that you should held all the responsibility by using this mod, modify it or distribute it. DO IT WITH YOUR OWN RISK
Click to expand...
Click to collapse
Sparepart app
this app won't give you a boost in your device's performance. its an app comes from aosp rom. you can use it to set the animation effect in your device. set the speed at 'fast' and you'll get a feel that your device is running zoom zoom zoom.
http://www.mediafire.com/?ckcq1c6k6fr86s2
I also want to make this thread as a tweak discussion. feel free if you want to discuss anything related to tweaks in this thread.
This is exactly the same tweaks I've mentioned before . I was lazy to explain You did a nice job in compiling them. Good post.
Sent from my GT-S5360 using xda premium
yup...I only create kuro1, kuro2, sysctl.conf. I've also edited gps.conf (previously made by hellstorm) and bacem tweak. however the other script is almost untouched.
Can i flash this tweak pack on galaxy y which is already using adrenaline engine....plz answer it....
you can but better if you don't. if you still want to use it, delete kickass kernel, kuro2, darky zipalign, sysctl, complete and sqilte optimize from my zip file then flash it.
can i flash this on galaxy y duos ????
BTW . if any problem i m reflash firmware....
Sent from my GT-S6102 using Tapatalk 2
the only thing missing is the ad-hoc mod
another great work mr. kurotsugi
edit: i was hoping no FC on the spare parts battery history..
@mano: yup...you can install it in duos
@leo: i'm still using it but i've got report that it has bug. I never experienced it but they said that the connection sometimes doesn't stable. Thats why i didn't put that in this tweak.
Sorry, this app is have that fc issue too.
kurotsugi said:
@mano: yup...you can install it in duos
@leo: i'm still using it but i've got report that it has bug. I never experienced it but they said that the connection sometimes doesn't stable. Thats why i didn't put that in this tweak.
Sorry, this app is have that fc issue too.
Click to expand...
Click to collapse
ahh.. i see
no need to say sorry
ps: can't test this atm
any ideas to make our internal memory as swap?
i heard swapping degrades memory card life so...
also..
add your sound tweaks in this pack + bravia engine...
Can u add this...
This is a lag free script from this threads...
http://forum.xda-developers.com/showthread.php?p=26365844
█✘•⊥•✘█
for the tuned megabassbeat: my sound mod is big, about 8mb and not everyone like to use it.
for the lagfree script: do you know that lag free mod will DELETE our system app? if the answer is yes, you should understand that the risk is too high for common user. I won't add that mod to my compilation script.
idea to make swap in internal mem?
using internal mem as swap have a risk that the internal memory might corrupted (and eternally couldn't repaired). --> the main reason why no one ever interested to use internal memory as swap.
are you still want to use it as swap?
kurotsugi said:
for the tuned megabassbeat: my sound mod is big, about 8mb and not everyone like to use it.
for the lagfree script: do you know that lag free mod will DELETE our system app? if the answer is yes, you should understand that the risk is too high for common user. I won't add that mod to my compilation script.
Click to expand...
Click to collapse
Oh....ok, if you no add this script
Thanks this explain(penjelasannya)
█✘•⊥•✘█
But,...i have error with kernel merruk pre2.0
setprop can't use in me...
How can i fix this?
How i change the kernel with repencis kernel?
█✘•⊥•✘█
first of all you should flash a stock kernel with odin. after that you could install repencis's kernel with usual method.
kurotsugi said:
using internal mem as swap have a risk that the internal memory might corrupted (and eternally couldn't repaired). --> the main reason why no one ever interested to use internal memory as swap.
are you still want to use it as swap?
Click to expand...
Click to collapse
if that so...
haha..
no way.
thanks man.
I am looking for scripts to speed up my phone. I don't want to wipe it clean, just looking for some scripts to speed it up. Most I am interested in is to speed up general phone usage and internet browsing. My rom is [ROM][MIUI-XJ] Mar 31 - 2.3.30 GB 2.3.7 EN-MULT+OTA+CM+Updater|D2EXT X-PART|A2SD+|D2W
Try supercharger v6. I've tried it and I honestly didn't notice any difference in speed, but some people have.
Also check out the app called greenify. It hibernates apps and stops them from running in the background and frees up more ram.
Sent from my HTC Desire using xda app-developers app
hi i found the fastest combination for our device : build.prop tweaks from fluide engine http://forum.xda-developers.com/showthread.php?t=2069238 , int.d tweaks from fly-on mod http://forum.xda-developers.com/showthread.php?p=40475302 or project lard http://forum.xda-developers.com/showthread.php?t=2265510 ( but after install delete build.prop tweaks from this script) in combination whit gaming ram manager that you will find in project lard's threat and for gpu you need full gpu rendering http://forum.xda-developers.com/showthread.php?t=2254999 and adreno booster http://forum.xda-developers.com/showthread.php?t=2167228 and that's all
tcris45 said:
hi i found the fastest combination for our device : build.prop tweaks from fluide engine http://forum.xda-developers.com/showthread.php?t=2069238 , int.d tweaks from fly-on mod http://forum.xda-developers.com/showthread.php?p=40475302 or project lard http://forum.xda-developers.com/showthread.php?t=2265510 ( but after install delete build.prop tweaks from this script) in combination whit gaming ram manager that you will find in project lard's threat and for gpu you need full gpu rendering http://forum.xda-developers.com/showthread.php?t=2254999 and adreno booster http://forum.xda-developers.com/showthread.php?t=2167228 and that's all
Click to expand...
Click to collapse
Thank you so much
[SHARE] [MOD] PurePerformances™X ◣ | Golden Edition | Scary performances on Android
Note : I'm just sharing the work of the XDA Member Jeeko.This mod was tested on Samsung Galaxy Y GT-S5360 running GingerDX and CyanogenMod 7 and Samsung Galaxy Pop Plus running CyanogenMod 7 by bieltv.3 .
◢ Features ◣
- Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60 system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the user)
Battery
- Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them with PureWakelocks™
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
Graphics, Screen, Images
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- Of course parts of CrossBreeder (credits to dev)
- Of course parts of Adrenaline Engine (credits to dev)
- Of course PureGraphics HD, even though I already told you
- Of course V6 supercharger
- Generates video entropy (like seeder)
CPU, Governors, I/O Schedulers
- Slightly improves the scaling of the frequencies (for better results you need a good kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
- Enable the swap partition in Android (experimental)
◢ Compatibility ◣
This engine works on any devices with any rom, but there is a version for CM's rom and one for stock based firmwares. So, CMx.x, Lewa Os, MIUI, etc.
Install the stock version only on your stock firmware of your phone....
if your device don't have gingerbread or ICS officially, install the CM version (This also applies to the AOSP)
Downloads :
1.Stock Version (Please test it on 2.3.6 roms and report here) - http://www.mediafire.com/download/q0a4crr8aq4gm24/PurePerformances™X_Stock.1.4.zip
2.CM Version : http://www.mediafire.com/download/62ms8ok7afi8230/PurePerformances™X_CM.1.4.zip
3.Uninstaller : http://www.mediafire.com/download/gnfh45p2ao2th07/PurePerformances™X_Uninstaller.zip
Original Thread : http://forum.xda-developers.com/showthread.php?t=2360670
Credits :
Jeeko
Click to expand...
Click to collapse
devilyuri for testing
Will try bro on Jelly Bread V5
will try & give feedback later.............
I tested it on CM7
Now my phone is very fast
Sent from my Galaxy Pop Plus BCM21553 using Tapatalk 2
This script make my phone like jet. Super fast and battery friendly
Recommend script afrter fly on mod :highfive::fingers-crossed:
For custom roms?
Sent from my Samsung Kulangot
TomalinSGY said:
For custom roms?
Sent from my Samsung Kulangot
Click to expand...
Click to collapse
Works on stock too rooted
It works like charm on evo x4.2 with pure audio @aniket.lamba check pm
Sent from my GT-S5360 using Tapatalk 2
tried and tested this on CM7 by bieltv.3 on my pop plus before ....
now im currently using hyperion 8 on my pop plus with Fly on Mod v4 and MeCheat ...
i should flash the stock version right?
and should i good to go now with thoose script (fly on mod + MeCheat) or should i uninstall them ?
Download 'n test on creed v4...
feed next...
edit-------------------------------------------------------------------
this mod was tested on my HH with creed V4 and run much faster than before...
+5 add for this tread
i think this good , same good like fly on mod...
thx sir...
flash CM 7.2 and good work.. faster..
akosicarlo said:
tried and tested this on CM7 by bieltv.3 on my pop plus before ....
now im currently using hyperion 8 on my pop plus with Fly on Mod v4 and MeCheat ...
i should flash the stock version right?
and should i good to go now with thoose script (fly on mod + MeCheat) or should i uninstall them ?
Click to expand...
Click to collapse
Well you should uninstall mecheat first and afterwards flash this tweak.
andynroid said:
Works on stock too rooted
Click to expand...
Click to collapse
I mean, does this work on custom rom? Specifically on Hyp 8? And do i need to remove all my tweaks in init.d folder?
Sent from my Samsung Kulangot
aniket.lamba said:
Well you should uninstall mecheat first and afterwards flash this tweak.
Click to expand...
Click to collapse
how to uninstall MeCheat ?
.
and i should use stock version on my Hyperion 8 right?
TomalinSGY said:
I mean, does this work on custom rom? Specifically on Hyp 8? And do i need to remove all my tweaks in init.d folder?
Sent from my Samsung Kulangot
Click to expand...
Click to collapse
Don't remove those who come default with savie's kernel and yeah it works on any GB custom rom.
akosicarlo said:
how to uninstall MeCheat ?
.
and i should use stock version on my Hyperion 8 right?
Click to expand...
Click to collapse
Delete the contents of the zip in your system folder and then flash this one.
aniket.lamba said:
Delete the contents of the zip in your system folder and then flash this one.
Click to expand...
Click to collapse
but i dont need to delete the fly on mod right?
akosicarlo said:
but i dont need to delete the fly on mod right?
Click to expand...
Click to collapse
No need to delete it.But just delete those files of meCheat in your system folder.
aniket.lamba said:
No need to delete it.But just delete those files of meCheat in your system folder.
Click to expand...
Click to collapse
got it
awesome share bro. works gr8!!!!!
GUIDE: FIX S7 LAG FROM ROOT! Works on ALL S7 Variants (& Almost ALL Android Phones)
Hey All,
I've found a GREAT PROGRAM that'll fix ALL your lag issues after rooting the S7, called Gov-Tuner.
I've tested by ODIN-ing back to stock (PE1 firmware) and my results were INCREDIBLE, though you do not have to (YMMV)!!
I'm also including Install instructions for Viper4Android Sony Beats 4.8 Universal Edition, SELinux Mode Changer, and what apps to freeze with BootManager - An XPOSED Module - below as these will also help speed up the phone AND provide even more compatibility to install most apps! (for example, SELinux MUST be set to permissive for V4A if you want to install any version OTHER THAN V4A Sony Beats 4.8 Universal Edition).
UPDATE: I just tested a "Ram Expander" type program and I had VERY different results each time I tried. However, my overall result was that it DID help - though there are costs. Read More Below!
I TAKE NO CREDIT for GovTuner, SELINUXChanger, V4A (And all variants) are NOT my programs! Please support the developer(s) of these incredible mods if it works for you! They have spent a LOT of time and effort to make something amazing & should be supported if you use them!
Now on to the instructions...
DISCLAIMER:
You take FULL responsibility for installing this mod. IF it brick's your phone, causes nuclear disaster, or blows up the planet, do not blame me... Well, if you do blow up the planet and I'm not one of the survivors, then you can blame me - otherwise, it's YOUR fault!!
(Now that I've covered myself, on to the instructions)
Install on a new, clean, and/or reset phone -
1)Reset phone completely to stock (no root) to PE1 or PF2 firmware (PE1 worked best for me for some reason)
2) Root Phone (g930v) - Follow guide from here: http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
3) Flash v15 FIX universal from OP located here: http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
I had trouble with the v15 Universal Fix on PF2 firmware, but Others have reported it works. So it's up to you...
4) Flash XPosed firmware IF you want to run XPOSED (You can use Wanam's framework v86.0 or Topjo's v86.2 - It's been mentioned that topojo's framework is smoother, but I've NEVER used it. Please report back and let use know. (let phone reboot) -
Install XPOSED APK at any time
5) Flash Gov-Tuner (v2.6 Latest Version as of writing this) (reboot phone)
Download From here: http://forum.xda-developers.com/devdb/project/?id=16012#downloads
GovTuner's Project Thread: http://forum.xda-developers.com/and...mod-gov-tuner-project-29th-june-2016-t3407828
6) Install Universal INIT.D and set the toggle to "ON" (From playstore) - Or flash a mod to give INIT.D support without needing an app
7) Install L-SPEED (Playstore) and either use my settings to make your phone INSANELY BLAZING FAST (available below) OR the settings suggested from this site after the LSPEED button -
http://forum.xda-developers.com/ver...uide-fine-tuning-performance-battery-t3417804
8) Install Terminal app (From Playstore)
9) Install an app to change your governor (ir. Kernel Auditor, Rom Toolbox, etc... from Play store)
10) Use app to select the Governor you want to use - (ie. interactive, ondemand, etc) - I prefer INTERACTIVE & suggest you select it - (if it's not already selected & running)
11) Open your preferred terminal app (from phone) to run GOVTUNER
(instructions with commands below - also available on Gov-Tuners Project Thread)
http://forum.xda-developers.com/and...mod-gov-tuner-project-29th-june-2016-t3407828
11a) in terminal, type "su" (without quotes and hit enter)
11b) in terminal, type "govtuner" (without quotes and hit enter) - Program will make sure you meet all requirements
11c) You should see a menu with 3 profiles available - Battery, Balanced, and Performance. (1, 2, & 3 respectively)
11d) Select the number the corresponds to the profile you want and then hit enter. After it configures you should see up at the top left the profile you selected running in some kind of color - (For instance, Performance is written in blue)
Gov-Tuner Project Thread here: http://forum.xda-developers.com/and...mod-gov-tuner-project-29th-june-2016-t3407828
12) PROFIT!!! Change & Test different governors AND profiles to get your phone to whatever you prefer.
Whenever you want to change profile, use the govtuner command.
Whenever you change your governor (through romtoolbox, kernel auditor) and you still want to use the same profile you last selected, then you only need to run the "tune" command.
*** Scroll Down to view a list of apps you should freeze ***
Install Gov-Tuner without Resetting Phone
(MUST HAVE ROOT)
1) Download GovTuner from here: http://forum.xda-developers.com/devdb/project/?id=16012#downloads
2) Install Universal INIT.D (Playstore) - Open app and set toggle to "ON"
3) Install Terminal (Playstore)
4) Install L-SPEED (Playstore) - Use my L-SPEED BLAZING FAST settings offered below (at reduced run time) OR the suggested settings from this thread - http://forum.xda-developers.com/ver...uide-fine-tuning-performance-battery-t3417804 where you'll get a slight performance increase with more run time. (Reboot phone)
4) install an app that'll change your governor (ie. Kernel Auditor, Rom Toolbox, etc.) (Playstore) - Only if you want to change governor
5) Flash Govtuner (v2.6 is latest version at time of writing) with Flashfire's - use OTA flashing option
6) Change governor ONLY IF YOU WANT - (interactive, ondemand, etc) -
I suggest selecting "INTERACTIVE" governor if it's not already running.
7) Open terminal app from phone and run GOVTUNER with the following commands (link to GovTuner Thread above)
7a) in terminal, type "su" (without quotes and hit enter)
7b) in terminal, type "govtuner" (without quotes and hit enter)
7c) You should see a menu with 3 profiles available - Battery, Balanced, and Performance. (1, 2, & 3 respectively)
7d) Select the number the coorosponds to the profile you want (1-Battery, 2-Balanced, 3-Performance) and then hit enter. After it configures you should see up at the top of terminal windows the profile you selected - in some kind of color - (For instance, Performance is written in blue)
8) PROFIT! You may want to test each profile with the different governor(s) until you get EXACTLY what you want. (Long battery life, More performance, etc)
*** Scroll Down for a list of apps to freeze ***
My L-SPEED Settings for an
INSANE PERFORMANCE BOOST!
My Governor is set to "INTERACTIVE" (used Kernel auditor) & the GOVTUNER profile is set to "PERFORMANCE"! (used govtuner within terminal app).These settings will give you an INSANE performance boost, and my runtime is usually 18 hours.
L-SPEED Settings:
Main tweaks Option (From MAIN MENU options)
You can "KILL MEDIA SERVER" manually from within lspeed - It will automatically run on startup.
Kernel Modifications:
Kernel Tweak - Disabled
Kernel Sleepers Optimization - Enabled
Under System Tweaks
Battery Improvement - Enabled
Faster Boot - Enabled
WiFi Sleeper - disabled (you preference)
Flag Tuner - Enabled (I recall a much better flag tuner mod that could be flashed. If its still available, you should use/flash it & disable this setting. The developer of LSPEED was the one who said this & suggested it to us when LSPEED was a flashed mod.
Assertive Display - Enabled
UI Optimizations:
Improve Scrolling - Enabled
Liquid Smooth UI - Enabled
Debugging Options Menu:
Disable Debugging - Enabled
Disable Kernel Panic - disabled
Other Tweaks Menu:
Better In Call audio - enable
Improve image quality - enable
MISC Tweaks - disabled
CPU Tuner Option From main Menu Options
CPU TUNING MENU:
CPU Optimizer - Enabled (Might not need with govtuner running, but I've used with this enabled and hasn't cause a prob - YET... lOl)
LNET OPTIMIZER (From MAIN MENU)
LNET Tweaks Options
NET BUFFERS - BIG
RIL Tweaks - enabled
LNET OPTIMIZATIONS Options
Google DNS - Disabled (Your choice)
Faster Streaming - Enabled
Fast Dormancy - Enabled
IO Tweaks (From Main menu)
Storage IO Tweaks Options
SD Tweak -Aggressive (This sets SD CARD cache amount. I'm using a 256GB Micro SD card and the aggressive setting changes the cache to 2048kb - for me)
IO Boost - Enabled
IO Extended Queue - Enabled
Partition Remount - Enabled
Virtual Memory (From main Menu)
Memory Management Tweaks
OOM Killer - Enabled
Cache Reclaiming - DOUBLE (This option WILL drain battery faster)
Cache Allocation - Medium
RAM Manager (From main Menu)
RAM Manager Options
Ram Manager - (I change this depending on what I'm doing between Multitasking or Gaming - though I hardly EVER play games)
Seeder (Main Menu)
Seeder Options
Seeder - Aggressive (This will drain battery a little faster but has given me AMAZING performance increases!) I'd suggest you try aggressive and work your way through each option to see where it takes you and how much battery / speed you gain / lose!
Cleaner (From Main Menu)
Cache Cleaner
(You can run whatever you'd like - I'd suggest running "Clean Junk Files and wipe cache partition & dalvik cache)
Cleaner Options:
Run Cleaner On Boot - Enable (You do NOT have to set it to enabled, but I prefer to clean things up at boot)
FSTRIM (From Main Menu)
FSTrin On Boot - Enabled (Again, it's not necessary to run this, but I do to keep things clean at all times and trimmed, too!) heh
Create a backup of these settings from within LSPEED just in case - you never know when you'll need to restore the settings.
Make SURE you create a backup of the setting you've just set, AND be certain that LSPEED can launch upon startup / bootup! (VERY IMPORTANT!)
SELinux Mode Changer v3.2
(Change From Enforcing To permissive)
1) Download SELinuxModeChanger from here - http://forum.xda-developers.com/devdb/project/dl/?id=12506
2) Install App
3) Run App and select permissive
4) Enjoy
As a side note, Viper4Android requires SELinux to be set to permissive (EXCEPT Viper4Android Sony Beats v4.8 Universal Edition located here with install instructions)! Can anyone confirm that V4A's latest version worked on the S7 with SELinux set to permissive? I will be testing later on, but please let us all know if possible! Thanks!
ROEHSOFT RAM Expander
(Additional SWAP File) To Speed Up S7
Here are the install instructions -
1) Download ROEHSOFT Ram Expander from the Play Store: https://play.google.com/store/apps/details?id=com.swapit.expander.de&hl=en (There is a FREE & PAID version - get paid version IF it works for you!)
2) You will now need to create, on your MICROSD card (External Storage) a 4GB partition - Please be warned, when you create a partition you can lose ALL your data. I would suggest MiniTool Partition. I'd make the first partition your storage partition (where you store pictures taken, music, etc), and the second partition as the the SWAP partition. Again, ONLY MAKE THE SWAP PARTITION 4GB! You can format the swap partition as a SWAP file system OR in ext4. Either way, it's your call. I found the SWAP file system to be a little better, but you'll need to try them out and see what works best for you.
3) Put microSD back in phone and launch ROEHSOFT's Ram Expander. Give SU permission. Click the menu at the top right and select swap location.
4) Run the app - At the bottom select the "Optimal Values".
5) It will ask you want profile you want (similar to GOVTUNER, but they have NOTHING to do with each other!). You can select Balanced, Gamers, Multitaking, etc...
6) It will ask you to select the directory to use as the swap location - MAKE SURE YOU SELECT THE CORRECT LOCATION BECAUSE it will DELETE ALL INFO ON THAT PARTITION SELECTED! BE EXTRA SURE as I'm not responsible if you select the wrong partition and lose EVERYTHING!
7) Let it do it's thing and enjoy! You'll only need to change the swappiness and possibly the cache.
7b) DO NOT SELECT PERFECT KERNEL unless you KNOW it will work!
7c) DO NOT SET TO AUTORUN until you know it works and does not cause boot loops, probs, etc..
8) ENJOY!
This really did speed up my phone (G930V - S7), and I was amazed because I didn't believe it would, HOWEVER, there is a cost. This CAN heat up your phone since it's writing to the microSD card. If you're playing games and using it a lot, your phone will heat up and the battery will be drained at an insane rate! But, the speed increase was impressive. Like everything else, it's a trade off...
Please post and let me / us know how this works for you!
Suggested Apps To Freeze with
BOOT MANAGER (Xposed App) and/or TitaniumBackup
Here are the apps that CAN be FROZEN with your favorite app (Titanium Backup, App Disabler, etc)
1)Game Launcher (ONLY If you want)
2)EMERGENCY Launcher (ONLY THE EMERGENCY LAUNCHER - do NOT confuse with ANY of the other launchers. Double check to make sure you are freezing the correct one, otherwise you will be in a WORLD of trouble!! - Located in system/app/emergencylauncher/emergencylauncher.apk)
3)SamsungDLPService (system/spp/SamsungDLPService/SamsungDLPService.APK)
4)Security Policy updates (system/priv-app/SPDClient/SPDClient.apk) - Freezing this SHOULD help those who haven't had success running XPOSED due to constant reboots.
5)SecurityLogAgent (system/app/SecurityLogAgent/SecutiryLogAgent.apk)
6)System Updates (system/app/SDM/SDM.APK)
7)Verizon Store Demo Mode (system/priv-app/com.customermobile.preload.vzw/com.customermobile.preload.vzw.apk)
----------------------------------------
Apps To Disable Through BOOTMANAGER
(FREE XPOSED App through the download section of XPOSED APP)
You can disable ALMOST EVERY APP that is running, however... DO NOT disable ANY SYSTEM apps unless you know what you're doing.
The ONLY APPS I can suggest you DO NOT "STOP" are the following:
1) Universal INIT.D
2) L-SPEED
3) Kernel Modification Programs (if Any) - Kernel Auditor, Rom ToolBox, etc...
4) IF by some chance you have an issue after disabling an app, just launch BOOTMANAGER and re-enable the app!
5) You can also "FASTBOOT" through bootmanager where it will disable EVERY SINGLE USER APP you have. Use this if your having a problem with bootup, an app, etc... It's great for diagnostic purposes OR to really speed up your phone if/when needed!
ViperATMOS Sony Beats v4.8 Universal Edition OR
ViperAtmos Sony Beats 5.5 Edition Installation Instructions for phones with
SELinux PERMISSIVE or ENFORCING!
BOTH versions DOES work with the Galaxy S7 Verizon Variant (G930V)!
This version of V4A (Viper4ATMOS Sony Beats v4.8 Universal Edition) runs with SELINUX set to enforcing or permissive unlike other versions! (Thanks to @srish2 for the info)!
1) Download the flashable zip (Direct Download Link: http://forum.xda-developers.com/attachment.php?attachmentid=3701983&d=1459364213)
2) Open flashfire and select OTA flash option
3) Select the downloaded zip file to flash from within flashfire
4) FLASH (let phone reboot)
5) Look in your app drawer and you SHOULD see a DOLBY APP & the Viper4Atmos or Viper4Android app.
Set your audio to whatever you prefer from within those apps. (You may want to go to the project's thread to see what is suggested) Here is the Link To Viper4Android, DOLBY, Viper4ATMOS, & Viper4DD's Project Thread - http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
5a)PLEASE NOTE - RUNNING THIS AUDIO TWEAK can (and most likely will) INCREASE your audio quality, BUT it will drain your battery slightly!
6) ENJOY Viper4Android, Viper4ATMOS, Viper4DD+, etc
You should be able to install other V4A variations versions as long as you have SELinux changed to whatever is required per the app's directions in the OP. V4A's Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12506
A Few More things...
You SHOULD get an app like bootmanager (xposed module) so you can select certain app's from loading at startup.
Hope this helps,
Swick
This resolves lag -- what about the obscene battery drain?
w0rdie said:
This resolves lag -- what about the obscene battery drain?
Click to expand...
Click to collapse
it fixed the INSANE battery drain AND insane LAG. Bottom line, it fixes both, FOR ME! (And the other 16 phones I have installed it on for my employees!) - Full disclosure, I did install it on a 17th phone, but that phone turned out to have a physical defect, so I dont really count that one, heh!
With govtuner, I can go for at least 18 hours in performance mode profile and over a DAY in battery mode profile. (You'd select the profile that you want through GovTuner in a Terminal app on phone).
But it saved my arse, big time. BEFORE govtuner, I would only get 6-8 hours battery time if LUCKY.
Now, I get a HECK of a lot more!
I've got an S7E and S7 -- I rooted and 'tuned' the E but couldn't live with the battery drain, overheating and lag (in order of severity) so I've opted to leave my S7 unmodified but welcome a viable root solution.
Going to give your steps a try on the Edge.
Also...
L-SPEED will help in MANY WAYS to either increase or decrease your battery usage, depending on the settings you use. That will CERTAINLY help a lot to decrease battery drain, too!
w0rdie said:
I've got an S7E and S7 -- I rooted and 'tuned' the E but couldn't live with the battery drain, overheating and lag (in order of severity) so I've opted to leave my S7 unmodified but welcome a viable root solution.
Going to give your steps a try on the Edge.
Click to expand...
Click to collapse
Thanks, that means a lot to me. I appreciate it! Let me know how it works.
FYI, I have mine set to performance mode and changed some of the settings in LSPEED to be even more performance enhancing than was suggested in the post / guide (link provided in that step to the settings suggested. Just scroll down to the LSPEED title). So my phone CAN run VERY hot. however, I've changed my phone to battery profile (within govtuner) and changed LSPEED settings to more battery conservation - taking a slight hit to performance - it ran cool and smooth and I did NOT notice ANY lag. Plus, my phones have close to 600 apps.
Oh, also... I would seriously suggest getting a program that'll allow you to stop certain apps from loading at start up. Forgot to add that to the directions. That's certainly helped as well!
Early read: performance seems on par with stock -- battery life isn't as solid as unmodified, but does appear to be much improved
w0rdie said:
Early read: performance seems on par with stock -- battery life isn't as solid as unmodified, but does appear to be much improved
Click to expand...
Click to collapse
Thanks for the early read - Glad the mod worked. Those developers for govtuner are amazing!
Appreciate it!
Don't forget, try other governors and then pick a profile that u wanna use. I've found interactive in battery profile to give good batt life & that same governor in performance profile to be very fast - alongside L-SPEED, of course!
Have stayed farr away from root, for lag and battery issues. Will give this a try though, thanks for putting this together!
swick1981 said:
Thanks for the early read - Glad the mod worked. Those developers for govtuner are amazing!
Appreciate it!
Don't forget, try other governors and then pick a profile that u wanna use. I've found interactive in battery profile to give good batt life & that same governor in performance profile to be very fast - alongside L-SPEED, of course!
Click to expand...
Click to collapse
Thanks for the guide sir. Heat is gone using interactive and balanced and lag is noticeably reduced. Great find. Out of curiosity, do govtuner tweaks set on reboot, or do I have to rerun and reset profile after I reboot the phone? Also would love to see what settings you use for most balanced performance under kernel auditor and govtuner.
Update: upon further review, this really really does work. For those of you who have held off rooting because of engboot lag/heat issues, rest assured this does a good enough job that it mitigates any problems I was having. I had followed all steps before trying this (flashing fixes v15, l speed, greenify, doze, amplify) but this is what did the trick. Thank you OP again
ororick said:
Thanks for the guide sir. Heat is gone using interactive and balanced and lag is noticeably reduced. Great find. Out of curiosity, do govtuner tweaks set on reboot, or do I have to rerun and reset profile after I reboot the phone? Also would love to see what settings you use for most balanced performance under kernel auditor and govtuner.
Click to expand...
Click to collapse
Govtuner SHOULD run at boot. You should only rerun the tune (or govtuner) command IF you've changed the governor OR soemthing within the kernel!
My Governor is set to "INTERACTIVE" & my GOVTUNER profile is set to "PERFORMANCE".
Here are my LSPEED settings
(Please understand that I sacrifice battery run time for performance and allows my phone to run for a little under a day!)
within the Main tweaks Option (From MAIN MENU options)
Kernel Modifications:
Kernel Tweak - Disabled
Kernel Sleepers Optimization - Enabled
Under System Tweaks
Battery Improvement - Enabled
Faster Boot - Enabled
WiFi Sleeper - disabled (you preference)
Flag Tuner - ENABLED (DEFINATLY ENABLE THIS!) - there is a better flag tuner available as a flashed tweak somewhere on XDA, but I can't remember where. However, the tweak is VERY GOOD within LSPEED. I'll update OP if I find the better one!
Assertive Display - ENABLED
UI Optimizations:
Improve Scrolling - Enabled
Liquid Smooth UI - Enabled
Debugging Options Menu:
Disable Debugging - Enabled
Disable Kernel Panic - disabled
Other Tweaks Menu:
Better In Call audio - enable
Improve image quality - enable
MISC Tweaks - disabled
CPU Tuner Option From main Menu Options
CPU TUNING MENU:
CPU Optimizer - Enabled (Might not need with govtuner running, but I've used with this enabled and hasn't cause a prob - YET... lOl)
LNET OPTIMIZER (From MAIN MENU)
LNET Tweaks Options
NET BUFFERS - BIG
RIL Tweaks - enabled
LNET OPTIMIZATIONS Options
Google DNS - Disabled (Your choice)
Faster Streaming - Enabled
Fast Dormancy - Enabled
IO Tweaks (From Main menu)
Storage IO Tweaks Options
SD Tweak -Aggressive (This sets SD CARD cache amount. I'm using a 256GB Micro SD card and the aggressive setting changes the cache to 2048kb - for me)
IO Boost - Enabled
IO Extended Queue - Enabled
Partition Remount - Enabled
Virtual Memory (From main Menu)
Memory Management Tweaks
OOM Killer - Enabled
Cache Reclaiming - DOUBLE (This option WILL drain battery faster)
Cache Allocation - Medium
RAM Manager (From main Menu)
RAM Manager Options
Ram Manager - (I change this depending on what I'm doing between Multitasking or Gaming - though I hardly EVER play games)
Seeder (Main Menu)
Seeder Options
Seeder - Aggressive (This will drain battery a little faster but has given me AMAZING performance increases!) I'd suggest you try aggressive and work your way through each option to see where it takes you and how much battery / speed you gain / lose!
Cleaner (From Main Menu)
Cache Cleaner
(You can run whatever you'd like - I'd suggest running "Clean Junk Files and wipe cache partition & dalvik cache)
Cleaner Options:
Run Cleaner On Boot - Enable (You do NOT have to set it to enabled, but I prefer to clean things up at boot)
FSTRIM (From Main Menu)
FSTrin On Boot - Enabled (Again, it's not necessary to run this, but I do to keep things clean at all times and trimmed, too!) heh
Once finished, PLEASE SAVE THESE CHANGES to you can load them and not go through all this again. Furthermore, make sure you do not disable LSPEED from running at start up! (Several people have had that problem and not realized it)!
I HOPE you're phone goes so fast it flies into the future to tell you the world is going to end! heh
Enjoy!
Swick
Govtuner did help out I used to use it when I was rooted but I still had stability issues battery did improve but still drained to fast for me. I'm back on stock
Sent from my SM-G930V using XDA-Developers mobile app
ickedmel said:
Govtuner did help out I used to use it when I was rooted but I still had stability issues battery did improve but still drained to fast for me. I'm back on stock
Sent from my SM-G930V using XDA-Developers mobile app
Click to expand...
Click to collapse
I'm sorry to hear that! Plus, that's extremely odd - did you test other governor's on all the govtuners profiles? Did you flash the v15 fix on the PF2 firmware (if you did that, it WILL cause stability issues - I can attest to that, sadly)!
I've setup on 16 S7's and they all work like a charm - no joke! I've NEVER had a phone this fast in my life, frankly!
Further, I do suggest starting from a clean install as that usually works best. PLUS, PE1 firmware seems, so far, to be the best and most stable firmware when flashing v15 fix.
I have setup on the PF2 firmware on 2 S7's, but they were not my phones, and though th owners have told me on several occasions that their phones are much faster, etc... I cannot swear to that because I do not know and have not seen them for some time. But, it did work and has helped significantly!
Anyway, I'd be happy to help you if you want... I hate to hear it didn't work for you!
Really sorry about that!
Swick
This solution is quite solid -- I do notice quite a bit of lag when the phone wakes up from sleep but it subsides quickly. Well played swick.
w0rdie said:
This solution is quite solid -- I do notice quite a bit of lag when the phone wakes up from sleep but it subsides quickly. Well played swick.
Click to expand...
Click to collapse
That's odd... You should try changing setting from within LSPEED app to change that behavior. It may not be possible depending on the profile you're using and the governor your using with govtuner, but... I know my phone has NO LAG, literally. (I'm swearing on my grandfather's gave & my 2 uncles' gaves, too) Seriously!
You may want to TRY my settings from OP - I know they will use more battery, BUT. See if that solves and and work back from there. Maybe you can find what is causing the lag when waking up, and fix it? just a suggestion...
In any case, I am glad it worked (mostly) for you. At least I know that ALL my phones are rooted and have ZERO LAG. That's all I care about. Plus, if you get a MOPHIE case for your S7 you can have WELL OVER 24 hours of battery life/run time!
BTW, the S6 mophie cases work JUST as well as the s7 mophie case - the only down side to the S6 mophie case - they do NOT have wireless charging, the S7 mophie case does! HOWEVER, the S6 case is far superior because it fully locks the phone into place. Whereas the S7 mophie case has a frame that you snap in place around the phone - the S7 mophie case provides FAR LESS "protection" because a small drop will cause the frame to pop off instantly! - Just thought I'd let you know in case you were wondering... heh
Swick
PS. LMK if you'd like me to help - tbh, I'm not sure what I can do to help, but am more than happy to try! But working back from my faster settings from within LSPEED should do the trick! LMK what happens!
swick1981 said:
Govtuner SHOULD run at boot. You should only rerun the tune (or govtuner) command IF you've changed the governor OR soemthing within the kernel!
My Governor is set to "INTERACTIVE" & my GOVTUNER profile is set to "PERFORMANCE".
Here are my LSPEED settings
(Please understand that I sacrifice battery run time for performance and allows my phone to run for a little under a day!)
within the Main tweaks Option (From MAIN MENU options)
Kernel Modifications:
Kernel Tweak - Disabled
Kernel Sleepers Optimization - Enabled
Under System Tweaks
Battery Improvement - Enabled
Faster Boot - Enabled
WiFi Sleeper - disabled (you preference)
UI Optimizations:
Improve Scrolling - Enabled
Liquid Smooth UI - Enabled
Debugging Options Menu:
Disable Debugging - Enabled
Disable Kernel Panic - disabled
Other Tweaks Menu:
Better In Call audio - enable
Improve image quality - enable
MISC Tweaks - disabled
CPU Tuner Option From main Menu Options
CPU TUNING MENU:
CPU Optimizer - Enabled (Might not need with govtuner running, but I've used with this enabled and hasn't cause a prob - YET... lOl)
LNET OPTIMIZER (From MAIN MENU)
LNET Tweaks Options
NET BUFFERS - BIG
RIL Tweaks - enabled
LNET OPTIMIZATIONS Options
Google DNS - Disabled (Your choice)
Faster Streaming - Enabled
Fast Dormancy - Enabled
IO Tweaks (From Main menu)
Storage IO Tweaks Options
SD Tweak -Aggressive (This sets SD CARD cache amount. I'm using a 256GB Micro SD card and the aggressive setting changes the cache to 2048kb - for me)
IO Boost - Enabled
IO Extended Queue - Enabled
Partition Remount - Enabled
Virtual Memory (From main Menu)
Memory Management Tweaks
OOM Killer - Enabled
Cache Reclaiming - DOUBLE (This option WILL drain battery faster)
Cache Allocation - Medium
RAM Manager (From main Menu)
RAM Manager Options
Ram Manager - (I change this depending on what I'm doing between Multitasking or Gaming - though I hardly EVER play games)
Seeder (Main Menu)
Seeder Options
Seeder - Aggressive (This will drain battery a little faster but has given me AMAZING performance increases!) I'd suggest you try aggressive and work your way through each option to see where it takes you and how much battery / speed you gain / lose!
Cleaner (From Main Menu)
Cache Cleaner
(You can run whatever you'd like - I'd suggest running "Clean Junk Files and wipe cache partition & dalvik cache)
Cleaner Options:
Run Cleaner On Boot - Enable (You do NOT have to set it to enabled, but I prefer to clean things up at boot)
FSTRIM (From Main Menu)
FSTrin On Boot - Enabled (Again, it's not necessary to run this, but I do to keep things clean at all times and trimmed, too!) heh
Once finished, PLEASE SAVE THESE CHANGES to you can load them and not go through all this again. Furthermore, make sure you do not disable LSPEED from running at start up! (Several people have had that problem and not realized it)!
I HOPE you're phone goes so fast it flies into the future to tell you the world is going to end! heh
Enjoy!
Swick
Click to expand...
Click to collapse
Awesome! What screen on time are you getting? With BT, wifi always on, location services, bunch of data apps, whether on unrooted U firmware, rooted or V firmware, I always seem to hover around 4 hours screen on time. My phone does sleep well though in all cases (90%+ deep sleep if untouched for an hour). With these settings OP, would you say your phone is now faster than stock?
davidisflash said:
Awesome! What screen on time are you getting? With BT, wifi always on, location services, bunch of data apps, whether on unrooted U firmware, rooted or V firmware, I always seem to hover around 4 hours screen on time. My phone does sleep well though in all cases (90%+ deep sleep if untouched for an hour). With these settings OP, would you say your phone is now faster than stock?
Click to expand...
Click to collapse
Hey, real quick - take a look on the OP in this thread - there are 2 settings that are missing under the kernel tweaks in my LSPEED settings! (Those settings are a big deal, too! SORRY!!!!)
I really can't answer your question because I ONLY run my BT for a few hours and my WiFi is on all the time. My screen brightness is set to auto (but I try to keep it as low as possible).
All I can say is test EACH governor (android has a LOT of governors that it supports) with govtuner's profiles and see what combination is best for YOU. It's possible that you'll get results similar to mine, where I actually got a near doubling of the battery. (Again, it was in conjunction with LSPEED & GOVTUNER and doing LOT of testing / tweaks).
As to your other question - HECK YES, my phone is FAR FASTER than stock. In fact, when I loaded a large spreadsheet (in excel) it would take about 30-40 seconds to load at best. Now, my phone loads these spreadsheets up in about 10 seconds (or less, though that's unusual)!
So, yes - it is FAR FASTER than stock, and I'm not understating things at all (nor am i exaggerating).
Sorry I couldn't be of more help... But I am EXTREMELY confident that you'll get an improvement - I just do not know how much!
Swick
swick1981 said:
Install Universal INIT.D and set the toggle to "ON" (From playstore)
Click to expand...
Click to collapse
Hi @swick, thanks for the comprehensive guide. I'm excited to try it.
The only problem I had with the steps was with Universal Init.D: it was crashing when I tried to run it. No SuperSu popup, nada. I recorded a logcat to troubleshoot.
It turns out I was using JRummy's BusyBox for Android, but after I installed BusyBox from stericson, it started working, popping up a SuperSu permissions request. Must have been some missing file or something.
Thanks again for putting this together.
When you enter su govtuner in terminal what exactly are you supposed to see? Nothing comes up when I enter it
srish2 said:
Hi @swick, thanks for the comprehensive guide. I'm excited to try it.
The only problem I had with the steps was with Universal Init.D: it was crashing when I tried to run it. No SuperSu popup, nada. I recorded a logcat to troubleshoot.
It turns out I was using JRummy's BusyBox for Android, but after I installed BusyBox from stericson, it started working, popping up a SuperSu permissions request. Must have been some missing file or something.
Thanks again for putting this together.
Click to expand...
Click to collapse
No prob, happy to help! I was bound and determined to find a fix, or make one, because of thedarn lag. Thankfully govtuner works!
On another note, I am using jrummy's busybox without trouble. you probably just needed to reinstall busybox from within the jrummy 's app again to update links? (Just a guess though)!
I'm glad its finally working for you! Make sure you test each governor & profile to see what works best for you! There are a LOT of combinations, so enjoy! heh
Swick