Related
Just bought optimus g ls970 from sprint. I am having trouble rooting it. It seems to be a driver issue, I have tried, superoneclick, GAIO, Bin4ry, and a couple others. Everything runs great and they say the root was successfull, but my phone never restarts or does anything at all. I manually restart and no super user. I am sort of a noob, I have rooted the evo 4g and one x, but cannot figure this out. I downloaded the drivers from lg's site they install successfully, I have used USBDeview to erase any old drivers. And loading the driver from GAIO runs and installs successfully. I have not done any updates on the phone. Factory reset multiple times. Used 2 different PC's win 7 -64 bit. No luck. I have searched these forums like crazy. Sorry to be noob, but I need help. Any info would be appreciated, Thank you.
jaypee440 said:
Just bought optimus g ls970 from sprint. I am having trouble rooting it. It seems to be a driver issue, I have tried, superoneclick, GAIO, Bin4ry, and a couple others. Everything runs great and they say the root was successfull, but my phone never restarts or does anything at all. I manually restart and no super user. I am sort of a noob, I have rooted the evo 4g and one x, but cannot figure this out. I downloaded the drivers from lg's site they install successfully, I have used USBDeview to erase any old drivers. And loading the driver from GAIO runs and installs successfully. I have not done any updates on the phone. Factory reset multiple times. Used 2 different PC's win 7 -64 bit. No luck. I have searched these forums like crazy. Sorry to be noob, but I need help. Any info would be appreciated, Thank you.
Click to expand...
Click to collapse
here i tried this link http://forum.xda-developers.com/showthread.php?t=2124394 and worked perfectly
on my E97310H hope this helps
Tried that link, no luck, followed step by step
Sent from my LG-LS970 using xda app-developers app
jaypee440 said:
Tried that link, no luck, followed step by step
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
make sure you have usb debugging on
Thank u mr amazing, i forgot to mention i had debugging enabled from the start. My gf has the same phone, tried w hers too. Same problems, 2 differ pc's 2 differ optimus. Anyone else having this problem?is it a sprint thing?
Sent from my LG-LS970 using xda app-developers app
I have made a little headway.
I updated prl, profile, firmaware, and lg software.
Now when I try to root using the currentroot method (and the english version)
It seems to work, my phone reboots and the shell tells me that root was successfull, yet no super user....
Android 4.04
kernel 3.0.21
build ZV9. IMM76L
software LS970ZV9
Have you had any luck with this? I am having the same exact problems with mine.. I have tried them all...
Try the latest root method from the Sprint section.
LG Optimus G E971/3/5
I got the phone rooted finally... Now the problem is I installed Wifi Tether and it will not work Need help..
Phone rooted; Sprint updated LG firmware and now stuck in recovery
Hello,
Sprint pushed an update immediately after I used GAIO. The phone boots into CWN recovery and will not run Sprints update.zip file. Suggestions?
newguyZ said:
Hello,
Sprint pushed an update immediately after I used GAIO. The phone boots into CWN recovery and will not run Sprints update.zip file. Suggestions?
Click to expand...
Click to collapse
I have tried so many different ROMS... It still will not work, the wifi tether turns on and it is not visible.
Figured out the Root Issue I was having also
jaypee440 said:
I have made a little headway.
I updated prl, profile, firmaware, and lg software.
Now when I try to root using the currentroot method (and the english version)
It seems to work, my phone reboots and the shell tells me that root was successfull, yet no super user....
Android 4.04
kernel 3.0.21
build ZV9. IMM76L
software LS970ZV9
Click to expand...
Click to collapse
I was having the same issue on my LG Optimus G LS-970 and, with a lot of googling, I found the answer here: http://forum.xda-developers.com/showthread.php?t=2050582
An extra step I took was to download the SuperSu from the Google Play Store. Hope this helps you.
UPDATE:Thanks to the hard work and diligence of XDA members @noobtoob, @ecs87, and recognized contributor @DocHoliday77, recognized developer @shabbypenguin, and others who will be added to this list after I go through some threads for their names -
It is my pleasure to announce that owners of the T-Mobile Samsung Galaxy Note 3 who have unfortunately hard-bricked
their device, (will not turn on, no led light, qhusb_download mode as device status when plugged into pc) are NOW able to boot their device using sd card mode, instead of expensive JTAG repair!!
noobtoob has been so kind as to ship me the sd card that he successfully flashed, with uncorrupted files from a working tmobile note 3, using odin! Thank you! These files contain all of the prerequisite files needed to boot in this state, to download mode! Once there, a stock firmware flash with ODIN will totally restore your device, just as the SM-N900A variant (at&t), and tmobile and sprint galaxy s3 hard-unbrick methods right here on XDA, can accomplish as I type!
Now, owners of this device can flash with alot more ease, and also this could not only lead to discovery of this method for the entire Note 3 series, perhaps other devices as well!
Read the thread! Why just look for a quick fix when you can actually learn more about the way file systems in android work - and what to avoid doing so that the chances of this happening in the future are less likely? I conducted quite a bit of research, and spoke to some very talented people to get this thread where it is - and to learn some new things myself. This thread contains alot of good insight and discussion about how to solve this issue. Perhaps you could learn something. Either way, all of what you need to fix a hard brick for these two devices is here.
[Update] 12/17/13]
I do in fact now have the sd card. Thanks @noobtoob! The device will not boot still.
I'm going to try a jig also.
[UPDATE] 12-21-13
Thanks to time, guidance, and commands from @shabbypenguin, we found the reason why the sd card noobtoob wrote the umbrick.img to will not boot. It is simply not large enough! So now thanks to proper guidance and this is from shabbypenguin, Tmobile Note 3 users are almost safe from a hard-brick!
If anyone deserves credit for this all, it is @shabbypenguin and @KAsp3rd, and ultimately Samsung, for at least programming their phones to be virtually fail-safe! Special thanks @zinnium to be the first to report this working for them! Thank You!
We have the new .img , so the proper method, and files will be in this post for all to use. For now, they are in this thread. Of course all contributors will be thanked. Give me a little time to get myself together here in the real world, this has happened so fast I've barely had time to keep up!!!!!
Pm me, or post if this method works for you. Now, I mean this only if you first are aware that **IF YOU FLASH ANYTHING OR USE THIS METHOD IT IS AT YOUR OWN RISK - I OR NO ONE ELSE IS RESPONSIBLE BUT YOU!!**
Also, only if you are simply using the very last unbrick.img posted by noobtoob, in this thread. It is ONLY FOR THE TMOBILE NOTE 3 SM-N900T VARIANT!!!! USING IT FOR ANY OTHER MODEL WILL NOT WORK!! THERE IS AN UNBRICK.IMG FOR THE SM-N9005 ALSO AT THE BOTTOM OF THIS POST! **AGAIN - ONLY USE THE .IMG THAT IS FOR YOUR SPECIFIC DEVICE!!!! YOU HAVE BEEN WARNED AND IT IS NOT MY RESPONSIBILITY IF ANYTHING GOES BAD!!!**
The file is 165mb in size, and needs to be written to a 32 or 64 gig sd card with Linux or another image writing tool, even using a CORRECT dd command in terminal emulator, with a rooted device. It has also been confirmed by XDA member zinnium to work with a 310mb system dump from of course - a WORKING T-Mobile Note 3. Also, XDA member aiti1980 has confirmed success with hard-unbricking the SM-N9005 model. The slimmer file does however, also contain all of the necessary partitions to correctly re-write improperly overwritten ones, including recovery!
Do not try to start a new thread and take credit for this!! This is the thread where this method started specifically for the t-mobile note 3 , and I take no credit for this method!!!! The real thanks should go to @shabbypenguin, and @KAsp3rd, who have brought this method, from unknown origins of my knowledge at the time of writing this - to XDA. @shabbypenguin has been kind enough to lend his expertise and time here in this thread, for the t-mobile note 3!! YAY Just in time for Christmas! Merry Christmas All!
UPDATE: 12/24/13 - Here's a Christmas gift for all SM-N9005 owners with a hard-bricked device...
aiti1980 said:
ooo! Thanks!!!
I use adb driver
into cmd win 7 i run:
ADB SHell
su
and you command and get unbrick.img
waiting for result...
I writting *.img on adata Microsd card from win 32 Disk Image
Update: WOW!!! My hard bricked phone power up!
Many thanks from RussiaĐ–)))
Where me put unbrick.img: dropbox, or another service?
Click to expand...
Click to collapse
This method works for the SM-N9005 variant too! CONFIRMED!
One step closer for a universal hard-unbrick method for ALL
Galaxy Note 3 Models! HURRAH Special thanks to aiti1980 for being the first to try and succeed! Congrats!
MERRY CHRISTMAS!*
Note 3 SM-N900T unbrick.img
http://www.mediafire.com/?6nu61z43y51v3k4
Thanks to noobtoob for the above SM-N900T unbrick.img
https://mega.co.nz/#!UtNhgAja!XLL6Xy7qxW0L9t4ZgXgowHFNlSsLuz5RIQ-fQc5Ctxk
Thanks to aiti1980 for the above SM-N9005 Unbrick.img upload! ENJOY
Try using ODIN to flash back to stock. Then root using one of the available ways on XDA. Normally you install TWRP using Goo manager after root. It's that simple.
Sent from my SM-N900T using Tapatalk 2
NeoAndroid said:
Try using ODIN to flash back to stock. Then root using one of the available ways on XDA. Normally you install TWRP using Goo manager after root. It's that simple.
Sent from my SM-N900T using Tapatalk 2
Click to expand...
Click to collapse
I know that. I don't have a pc so I noticed on the twrp page that terminal emulator was an option, so I tried it.
Odin will not recognize the phone, how exactly do I use your method?
msmercy42 said:
I know that. I don't have a pc so I noticed on the twrp page that terminal emulator was an option, so I tried it.
Odin will not recognize the phone, how exactly do I use your method?
Click to expand...
Click to collapse
Recovery on the note 3 is actually on mmcblk0p15. So the issue is thankfully the partition you were trying to write to didn't have enough space to write.
If you change it to mmcblk0p15 you should be good. Or just install goo manager and install that way which is simplest. Should be option to install open recovery script.
Sent from my SM-N900T using xda app-developers app
chstewart said:
Recovery on the note 3 is actually on mmcblk0p15. So the issue is thankfully the partition you were trying to write to didn't have enough space to write.
If you change it to mmcblk0p15 you should be good. Or just install goo manager and install that way which is simplest. Should be option to install open recovery script.
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
The help is much appreciated, however I cannot turn on the phone at all...
msmercy42 said:
The help is much appreciated, however I cannot turn on the phone at all...
Click to expand...
Click to collapse
You should be able to get into download mode still. Try pushing a new recovery with Odin. If still having issues Odin stock or you can also use kies to restore your phone....
Sent from my SM-N900T using xda app-developers app
Thanks for the help, I can't get the phone on at all though... it doesn't even recognize my device other than windows stating that it cannot recognize it, as it
malfunctioned.
Kies, will recognize it, even in this case?
Lastly, are you telling me that there is a way to push recovery with Odin even though the device is off, will not go into download mode, or recovery? If so, that's great!
Try with kies, best option as it will firmware reset your device back to stock.
Sent from my SM-N900T using xda premium
d12unk13astard said:
Try with kies, best option as it will firmware reset your device back to stock.
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
Thanks for the assist... will try kies as soon as I get to a PC in the morning. I honestly hope kies does the trick, PC stated it didn't recognize my device due to a malfunction.
I'll check the drivers also. Do you have any other suggestions? I just want to try every avenue avaiable. Again, thanks a lot.
msmercy42 said:
Thanks for the assist... will try kies as soon as I get to a PC in the morning. I honestly hope kies does the trick, PC stated it didn't recognize my device due to a malfunction.
I'll check the drivers also. Do you have any other suggestions? I just want to try every avenue available. Again, thanks a lot.
Click to expand...
Click to collapse
Update - I tried using Odin 1.85. I see the device being recognized in one of the ports, but flashing the stock firmware, or twrp yielded no results.
I tried reinstalling the Samsung drivers, nothing. I even tried Odin 3.07, and 3.09. Since the device will not power on, I guess that is why it will not work.
I then tried an emergency firmware recovery using kies. It did not detect the device, which is normal, so I disconnected and reconnected the device repeatedly,
with no success. I uninstalled an reinstalled kies, and that did nothing either.
I installed the android 4.3 sdk, and used adb in an attempt to recognize the device using commands like adb reboot recovery.
Adb replied with : no devices found.
I attempted through windows, to examine the ports, and found that there were different drivers present. The drivers installed on the PC were named QHUSB_DOWNLOAD 9008. When I first plugged the device to the PC, I noticed the device named as QHUSB_BULK, before changing to the above name, the same as the name for the drivers.
So my device is still alive.
Any advice? Can anyone help me get my phone on, at least into download mode? From there I can get it going. Please help if possible.
Sorry been busy with work. Are you sure you can't get into download mode? I originally wrote twrp to the wrong partition as you did and could still get download mode.
Theoretically it shouldn't have done anything that would prevent download mode from working....
Manual method for getting into download mode.
Volume-down+home+power
Sent from my SM-N900T using xda app-developers app
chstewart said:
Sorry been busy with work. Are you sure you can't get into download mode? I originally wrote twrp to the wrong partition as you did and could still get download mode.
Theoretically it shouldn't have done anything that would prevent download mode from working....
Manual method for getting into download mode.
Volume-down+home+power
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
I tried everything. No, download mode is not working, though I agree that it should theoretically still. I am still trying the three button method.
Would a jig work? I am working on one. Any ideas besides that?
i was going to suggest a jig actually. if that doesn't work you're probably out of a phone. could try warranty since it's REALLY bricked they probably won't be able to tell, did it with T-Mo on my G1, said it stopped turning on.
Have you tried removing the battery and holding down all the buttons before reinserting the battery again. My phone wouldn't turn on once and this helped. If not call tmobile tell them all kinds of funky things are happening with your phone and it keeps turning off. Once they tell you to factroy reset your phone, act like you are following their instructions, then when they tell you to turn it back on, tell them it will now not even turn back on. They are so slow there & will send you out a new one you'll have in 24hrs. Trust me Ive had to do this numerous times due to ocd when it comes to phones and having to have reasons to return them for the slightest flaw. I returned my galaxy note 2 before i got this note 3 like 8x's & even returned it the wk before i bought my note 3 just to get 1 with all new parts if not maybe even a new phone so the note 2 i sold would be in practically new condition if not like i said brand new,lol. im sure someones gonna get all butt hurt and start talking about fraud,lol
In the future you can flash Twr using Goo on your phone with No computer. Use JRummy 's rom Toolbox pro.
Sent from my Nexus 4 using xda app-developers app
chstewart said:
Sorry been busy with work. Are you sure you can't get into download mode? I originally wrote twrp to the wrong partition as you did and could still get download mode.
Theoretically it shouldn't have done anything that would prevent download mode from working....
Manual method for getting into download mode.
Volume-down+home+power
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
I agree, I simply followed the instructions on the twrp site, to flash recovery through terminal emulator.. I might have been off with the last number, and it obviously messed up my partitions... how did you get into recovery? The three button combo isnt working at all , no variation of it or battery pulls, or inserts have worked yet..
Also this is the place to get answers. Yet almost a thousand views but not even 20 posts. I know there is a way to fix this, can anyone share the fix?
msmercy42 said:
I agree, I simply followed the instructions on the twrp site, to flash recovery through terminal emulator.. I might have been off with the last number, and it obviously messed up my partitions... how did you get into recovery? The three button combo isnt working at all , no variation of it or battery pulls, or inserts have worked yet..
Also this is the place to get answers. Yet almost a thousand views but not even 20 posts. I know there is a way to fix this, can anyone share the fix?
Click to expand...
Click to collapse
It doesnt look good. I sent my vzw dev note 3 to Samsung with the same reboot problems and not being able to flash anything, and even they couldn't fix it.
Sent from my SCH-I535 using Tapatalk
msmercy42 said:
I used a command like : adb push*openrecovery-twrp-2.6.3.x-hltetmo.img*/sdcardadb shell dd if=/sdcard/openrecovery-twrp-2.6.3.x-hltetmo.img*of=dev/block/platform/msm_sdcc.1/by-name/recovery, in terminal emulator to flash twrp. "Mmkblk0ps9" was at the end.
26081 files sent
26081filews recieved
write error : no space left
That is what I saw next. I tried it again, three times, but noticed that write error was not there, so I assumed it was successful.
I rebooted, as instructed, and now a totally bricked device. I saw " qhusb_download " plugging it into one pc. A laptop with windows 8 stated that windows cannot recognize the device because it has malfunctioned.
Can someone please help? This is a disaster... the sm-900a has a method here on xda that fixes this problem... is there a way to fix this on a tmobile note 3?
Click to expand...
Click to collapse
Sorry to hear! I'll save you a whole bunch of time, I did the same thing to my galaxy s3 while trying to upgrade my installed clockworkmod. Long story short the commands I entered into terminal emulator we're fine its just that I put the wrong memory block which apparently flashed the image to the wrong area of the chip. I rebooted the phone and nothing happened. When I plugged it into the PC I would get the same thing you're getting. After a ridiculous amount of time I managed to get my hands on the correct drivers and installed them and found that flashing a stock firmware through Odin was a waste of time.
You need to send your phone into Samsung and the only solution is a motherboard replacement. Or you can find someone locally who can do a JTAG mod for you. But doing so will definitely void your warranty. When I shipped my phone into Samsung I told them I was using the phone and all of a sudden it got very hot and turned off and wouldn't turn on. Back in the S3 days I had to wait 3 weeks to get my phone back repaired. But these days there now Samsung service centers everywhere so you can probably get replaced phone on the spot.
Sent from my SM-N900W8 using Tapatalk 4
Qhusb_bulk drivers??
msmercy42 said:
I used a command like : adb push*openrecovery-twrp-2.6.3.x-hltetmo.img*/sdcardadb shell dd if=/sdcard/openrecovery-twrp-2.6.3.x-hltetmo.img*of=dev/block/platform/msm_sdcc.1/by-name/recovery, in terminal emulator to flash twrp. "Mmkblk0ps9" was at the end.
26081 files sent
26081filews recieved
write error : no space left
That is what I saw next. I tried it again, three times, but noticed that write error was not there, so I assumed it was successful.
I rebooted, as instructed, and now a totally bricked device. I saw " qhusb_download " plugging it into one pc. A laptop with windows 8 stated that windows cannot recognize the device because it has malfunctioned.
Can someone please help? This is a disaster... the sm-900a has a method here on xda that fixes this problem... is there a way to fix this on a tmobile note 3?
Click to expand...
Click to collapse
Hey, Any luck with restoring your device, at all?
I'm in a somewhat similar predicament, myself... I accidently Wrote a backup of my NV Data to the EFS... 0_o
The log of the process showed everything seemingly going well... After rebooting, however... Well, it never did...
Now I can't get into Recovery, ODIN, Normal boot, nor will plugging it in even charge the battery(No screen/led response)...
I see QHUSB_BULK under Unknown Devices (Win7-Ult-SP1_x32)... Can't for the Life of me find the drivers, though...
In fact, reliable old Google even only returns 5 results relevant to said driver, each of which being a post in this thread =D lmao... (so prolly will be 6 results, once I submit this post) But yeah, I'm at a complete loss....
I hope you were able to find a solution for your device. And I hope someone can help discover/produce one for mine as well...
Thank you, XDA and all it's Dev's/Members...
M1k3Carson1369 said:
Hey, Any luck with restoring your device, at all?
I'm in a somewhat similar predicament, myself... I accidently Wrote a backup of my NV Data to the EFS... 0_o
The log of the process showed everything seemingly going well... After rebooting, however... Well, it never did...
Now I can't get into Recovery, ODIN, Normal boot, nor will plugging it in even charge the battery(No screen/led response)...
I see QHUSB_BULK under Unknown Devices (Win7-Ult-SP1_x32)... Can't for the Life of me find the drivers, though...
In fact, reliable old Google even only returns 5 results relevant to said driver, each of which being a post in this thread =D lmao... (so prolly will be 6 results, once I submit this post) But yeah, I'm at a complete loss....
I hope you were able to find a solution for your device. And I hope someone can help discover/produce one for mine as well...
Thank you, XDA and all it's Dev's/Members...
Click to expand...
Click to collapse
Nothing yet....and I'm looking everywhere
for a system dump of the T-Mobile note 3, so I can maybe find the files needed for the fix.
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
HPTesla said:
The key here is going to be getting back into recovery. Have you tried getting into Download Mode? If you saw the LG logo then you SHOULD be able to get into download mode. Make sure the phone is completely powered off. Connect the USB to your pc but before you connect the other end to your phone, hold volume up then connect it. You should see "Download Mode" on the screen. You will see other directions for download mode but for me this always works, usb to pc, hold volume up then plug the phone in while still holding the volume up. If you can get into Download Mode you can flash a teenybin to get back into recovery following the guide in this thread here.
Currently even if you can get into Download Mode adb might not recognize your phone(at least it never did for me). Once you flash a teenybin using LGNPST, you should be able to get into Recovery. Once in Recovery you can use adb to pull your files off of the phone and onto your computer. I use it from a linux terminal but there are guides available for Windows if that's what you use. The adb guide should be easy to find on xda(just search) so I haven't linked to it. Once adb is set up on your computer AND you can get into Recovery you can use the command 'adb pull /data/media' without quotations and it will copy the contents of your internal storage to your pc. However if you can get into recovery you do have other options for just getting the phone back up and running. This guide here should also help.
If you are familiar with irc(internet relay chat) you can hop onto freenode and enter the #lg-optimus-g channel. As soon as you enter the channel you will see "Need Help? You won't read this but..." followed by a link. All the files for LGNPST, teenybins, and in depth tutorials on fixing a soft brick will be found there. I hope this helps you and hooray for me because this is my 200th post!
PS - If you can't get into Download Mode then your secondary bootloader is gone and there isn't anything you can do(to my knowledge). However, like I said, if you saw the LG logo at all, Download mode should still be an option. Also keep in mind these instructions are for the Sprint(ls970) lg optimis g. I believe the keys are flipped on AT&T/International models(Volume Down when you plug it in to get to Download Mode).
Click to expand...
Click to collapse
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Penley94 said:
Thank you for the response, i just tryed to get in to download mode and it went in to it fine. I would try to do all that to repair it but I dont want sprint to see that its rooted and it I cant have it be fixed when the new phone comes in, the only thing that i want is to get my files from it. Is there any way that I can just do that but leave the phone the way it is? (Not booting up passed the lg logo) I want the new phone because my current Optimus G's battery is going pretty bad I think and I would like a new one.
Click to expand...
Click to collapse
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
HPTesla said:
There are plenty of ways to get it stuck at the lg logo, sometimes it happens just from dirty flashing a rom, sometimes because you install a rom without wiping dalvik/cache. But you should know if you are on Sprint, one of the reasons I stick with them(even though their coverage is horrible in my area) is because rooting DOES NOT void your warranty with Sprint. They will warn you against it but they are the only carrier that allows rooting and will still fix your phone. Here is some info on that here. They won't advertise it but it's the truth. But bricking your phone intentionally is pretty easy I think. After getting back your data, just go into recovery and start deleting stuff you normally wouldn't. It's similar to opening up your car's hood and saying "This looks important" and ripping it out, lol. At this point that's what I would do, fixing your rooted phone is within their warranty, replacing it(which is what you want) I'm not 100% on. Although the post I linked to, says even ordering a replacement on a rooted phone is covered. Its in a reply on that page, you'll see another link. So you could get your info, use a different LGNPST file to set your phone back to factory(which will relock the bootloader and lose root) and then you can do what you did to get there in the first place or root it and start deleting important files with a root explorer to get it back to being stuck. Hope this helps.
Click to expand...
Click to collapse
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Penley94 said:
Oh wow I never knew that but that helps a lot thanks for the help, the sprint guy said theydid a master reset or hard reset or soemthing like that, does that mean it deleted all my pictures and everything? And i understand what you mean to rebrick it that's pretty simple. When i get my new optimus is there a new root out for the update? And what roms do you prefer?
Click to expand...
Click to collapse
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
HPTesla said:
If they did a hard reset it is possible that it wiped everything but not a definite. I purchased my phone from Best Buy and was on zvb. When the zvc update came through it messed my phone up(which is why you don't take OTA's once rooted without further knowledge/modifications) so I took it to Best Buy and they said they did a hard reset to fix it. It worked, my phone booted back up and my internal was fine. However, that's Best Buy and they barely know what they are doing so it may have been a soft reset, I am not 100% sure. As for a new root for the update, I received another phone shortly after because the glass back on mine broke and Best Buy replaced it with a whole new phone. It was on zvc and I used an app named Framaroot with the Gandalf exploit option and it worked fine for me. I have heard of others having issues with that method but for me, it worked and has stuck.
Fiddy619's universal root method seems to be the preferred way for our phone, look in the general section here for a thread by engine95 to see what I mean. After I rooted with Framaroot I then used FreeGee and unlocked the bootloader then made a total nandroid backup of my stock in TWRP before going further. I also copied the backup to my PC just in case.
As for my preferred roms, if we are talking about Android 4.4 both Vanir and PSX are my personal favorites. However as you can tell from my signature I am still using stock zvc android 4.1.2. I have flashed just about every rom available for our phone but my daily driver is stock that I have modified manually(different kernel, removed bloat ware, minor modifications and tweaks, etc). For android 4.3 I have had the best experience with CM10.2 and cfxe. I have not tried CM11(based on 4.4) for awhile but it seems to have overwhelming support - Cyanogenmod usually does.
Really when it comes to roms it's personal preference. They are all very similar with different tweaks/additions. As for which one is the most stable that is also a tricky question. Even though we have the same model of phone, I have seen how picky they can be from one to the other. My roommates have the EXACT same phone, installing CM10.2 worked fine for two of us, but one lost GPS and I had to fix it.
My best advice for when you get your new phone is to backup your working stock and then have fun flashing different things making sure you follow the instructions per rom exactly. It's always a good idea after making your backup(if planning to install another rom) to wipe everything except your internal storage and do a clean install of the rom and gapps. Then, test it for a day or so because sometimes it takes time to settle in. It's a shame that Optimus DE gave you issues, it was rock solid for me, again, these phones are picky! But one of the main reasons I stayed with stock is because the AOSP based cameras leave much to be desired when compared to the LG camera. Again it's just personal preference because some don't like the lg camera.
If you have any other issues or questions I will be glad to help if I can. A lot of the people you see who are active on the forums are very knowledgeable, as long as you ask politely most will be glad to help.
Click to expand...
Click to collapse
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Penley94 said:
Okay Im going to try some new roms out when I get my new phone, I would like to try out an AOSP Kitkat Rom but I couldnt get one to flash last time I tryed but I will figure that out later when I get it. Now back to my Bricked Optimus, I want to try the teenybin method although I dont understand the directions... the second step tells me to flash but how can I do that without recovery? and it doesnt say anything about entering in download mode which is the only thing I can do, am I forgetting something? And thank you for the help Tesla I really appreciate it, Ive had more assistance from you than anyone else.
Click to expand...
Click to collapse
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
HPTesla said:
Are you a windows user? The teenybin isn't flashed from recovery it is flashed from a tool called LGNPST which is a Windows program. I am going to private message you a link. It will have links for downloading and installing LGNPST on your PC. It says that you will lose all your data but if you are using the teenybin you shouldn't. It's LG's tool for flashing firmware and gives that warning regardless of what you flash. And you're welcome, coming from an EVO 4G this phone is very different and plenty of people have helped me - just paying it forward.
Click to expand...
Click to collapse
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Penley94 said:
Hey I got in to recovery through the Teenybin although the reset that they did deleted all of my stuff so Im kinda bummed:/ but its okay cause I got my new Optimus today and its brand new so Im happy with it. Thanks again for all of the help. Thats funny that you used to have an EVO 4G because I had it for so long and thats the phone I switched back to when my LG got bricked, but let me tell you Im glad to be back to the Optimus haha the EVO 4G is just way to slow anymore. Now that I have this new Optimus which root method should I go with? Its currently runnning ZVB (4.1.2) should I update the software? It says theres a software update available but I know that sometimes they dont have roots out for those updates so how should I start with this process again with the new phone in your opinion? I havnt done this in forever (going on a year) so I cant really remember everything that I had to do.
Click to expand...
Click to collapse
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly what he said, framaroot was quick and easy for me, but the lgog is so damn picky and fiddy seems to be the preferred method so use it just to be safe. I had zero issues with framaroot but I think I've just been lucky. And definitely update to zvc before doing either. I'd also update prl and profile for good measure.
That sucks that you lost all of your data, they must have actually did a hard reset where as BestBuy told me they did a hard reset and actually did a soft reset. But it's BestBuy so I never expect much. I softbricked my lgog the day after I got it using the GAIO tool(before finding out about FreeGee) and they fixed it with a soft reset. The guy called the manager over and the manager asked me if I tried unlocking the bootloader and I played dumb. My exact words were "What the hell is a bootloader?" and he immediately fixed it. But I was shocked anyone at BestBuy would even know that. Lmao.
As for my EVO, the micro usb port broke so I was charging it for two months like MacGyver, literally stipped the usb charging wire and hooked it straight into the positive/negative terminals in the battery while turned off! It was a fire hazard but it did the trick, lol. And luckily it had external sd(my one big gripe about the lgog) so I could still get my stuff off of it even without usb. I did love that phone, but you're right, it's incredibly slow now compared to the wonderful lgog.
And as always you are quite welcome!
---------- Post added at 07:39 PM ---------- Previous post was at 07:30 PM ----------
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I think the reason I say framaroot is bc its also super easy, install the app, pick gandalf exploit and it will do it's thing - done without ever connecting to a pc. But @engine95 is right, fiddy is more stable so use that. As for TWRP, I love 2.5.0.0 but for KK roms you have to use the one that comes with updated FreeGee, TWRP 2.6.3.x because of the SELinux changes Google made with 4.4. TWRP 2.6 was unstable originally but has since become just as stable as 2.5 according to most. OpTimuS DE was rock solid for me, as for getting some of the G2 apps, I'm not certain. It's doable but I don't know how difficult it would be because I've never tried to install them elsewhere. And I already gave you my choice of best current KK roms but today I found out a few guys are trying to get OMNI official for us. When that happens I think I will be switching to OMNI because they have been producing some impressive commits/tweaks that you won't find elsewhere. Just look through xda news to see what I mean, OMNI is on a roll!
Penley94 said:
The fiddy universal looks easier to me so I will probably use that although its not very Important which ever one is better I will use, and what recovery do you think is better? I used TWRP before but is the other one any better? I will probably go with that anyways Im just trying to get some opinions in. And what ROM do you use? I think Im gonna start out with the stock rooted ROM but theres still some stuff I want from the DE ROM like the G2 keyboard and other features from the G2, is there any way I can get those? And have you had any experience with the KitKat ROMs? Those interest me too
Click to expand...
Click to collapse
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
I prefer TWRP just because that has always been our best one since the beginning. Now that all the versions of the OG are coming together though both are fine.
I like stock, but Lrod's OpTimuS 5.0 is my daily. The G2 adds he made got me hooked.
If your gonna try to pull some stuff from DE, check with Lrod. He's made alot of changes to a lot of files making it difficult. For me at least.
I've ran all the KK Roms and I liked them all. PSX is probably my favorite though. I liked Liquid in its early days, pre KK. I'm not sure it's up to KK yet.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Again, I think you're right on all fronts. Liquid was smooth(heh) but it hasn't been long since we received an official 4.3 so I don't think they're up to 4.4. And same goes for the G2 apps, sometimes it's as simple as pulling an apk out of a zip and pushing it to system/apps and changing permissions but I think Lrod did a lot of work to get the G2 apps working on our phone because they required certain dependencies/modified frameworks.
engine95 said:
Let your phone update before rooting and unlocking. You should end up with ZVC.
Then, you have a choice on rooting. @HPTesla will say Framaroot. I'd say use fiddy Universal root.
Then DL FreeGee from the Playstore, use the"mako" version of TWRP/CWM, your choice, I'd do with TWRP and you'll be unlocked.
Back it up in recovery and you'll be good to go.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Penley94 said:
Okay so I rooted it through fiddys universal root but when I try to go on to FreeGee it just doesnt want to open for me? Ive tryed a lot of times and I get nothing it will either send me to the playstore to an app called busy box or will sometimes restart my phone, Im confised I have no clue what to do? I tryed to uninstall and reinstall and nothing I installed the busybox app but it said I didnt have root permission or there was a problem getting the root or something like that.
Click to expand...
Click to collapse
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
engine95 said:
You have to root before unlocking.
Make sure your phone has at least 70 percent charge or more!!
Go to Settings: Settings>Security>Unknown sources checked: Settings>Developer Options>USB Debugging checked, Settings> Display>Screen Timeout - at least 5 min
from fiddy thread.
Directions
1. Unzip the zip file
2. Make sure USB Debugging is on, and you are in Charge only Mode
3. Run the CurrentRoot.bat, wait for the prompt. (Can now be run as admin if you wish, Still works running as regular user tho. Thanks robisodd)
4. Change to MTP Mode
5. Just ignore when your computer asks how to view files on your device.
6. Press enter in the CMD prompt to continue.
7. Done.
You shouldn't have any issues.
If you do, then try Framaroot. http://forum.xda-developers.com/showthread.php?t=2130276 and follow those directions.
Follow this. http://forum.xda-developers.com/showthread.php?t=2050582 It has all the info on rooting and unlocking
Edit. You may have to root as admin/not admin, try both.
Edit #2 Also, do not use USB 3.0 ports. They are iffy for this stuff. LGNPST included
Click to expand...
Click to collapse
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Penley94 said:
Okay i will try this later when i have access to a computer, but the last root i tryed told me it was successful although it didnt restart my phone or anything it just said it was in the command prompt. I will try again cause i dont think it did anything. But i have a question about roms, i am most likely going to flash the DE 5.0 again because i like it with the g2 keyboard and i kind of like the lg feel to it but the only problem is google play music always gives me an error when im playing songs and it always has. I heard aosp roms dont have that problen so in your opinion what is the most stable aosp rom with all features working like gps and everything??
Click to expand...
Click to collapse
AOSP SuperNexus has been getting good reviews here in the forums but I haven't tried it yet. I would give that one a shot though. I'd flash GAPPS standard with it instead of GAPPS core as well. This is just generally speaking with any of the AOSP roms.
The directions @engine95 gave you for fiddy are spot on(as usual ), specifically having the phone in charge only mode instead of mtp. I think a lot of people have missed that step and it won't work in mtp. Using usb 2.0 is another good tip.
And if your phone didn't reboot, you probably arent rooted. Easiest way to check that you are rooted is by going into the app drawer and seeing either Superuser or SuperSu app. If it's there, you're rooted, if not, it didnt work. If it said it worked but didnt reboot, Im assuming you rebooted manually? It sounds silly but sometimes it's as simple as that. But again, after rebooting if one of those apps arent there, you are not rooted.
EDIT: I've never tried rooting with fiddy without being in charge only mode, Im wondering if being in mtp may install supersu/superuser app but not the binary? Probably not but I could be wrong. Just wondering if there is any possible way that the app could be there but you still wouldn't have root privileges. For me, if the app is there, I'm rooted but I don't pretend to know everything(far from it, lol).
EDIT#2: Once you are rooted and recovery is installed, here is the link to SuperNexus.
EDIT#3: And I can't stress this one enough....after rooting and unlocking the bootloader, before flashing ANYTHING, make a full backup of your stock AND copy the TWRP folder(with your backup in it) to a computer, JUST IN CASE! That way you will always have a backup elsewhere, even if something goes wrong with your phone's internal storage. Better safe than sorry!!! And it's also best to copy the entire TWRP folder.
@HPTesla You're on a roll!
Go with everything he's said.
I don't use Google music ,so I'm of little help there.
Almost every ROM has its quirks, and it's just a matter of finding the one that does what you need/want.
Our devs have given us a lot of options. And I know, I sure appreciate them.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Penley94 said:
so yesterday i installed the new optimus de rom and it started up fine and everything was okay, then today i realized my 3g wasnt working and usually thats no big deal because all i have to do is restore my efs in the app FreeG (I think thats what its called, I might be wrong). Well right after i did that, i hit restart phone and it turned off then wouldnt come back on. Then i finally got to the LG symbol but it will turn off then the screen will be on but will just show black. I cant boot in to recovery nor can i do anything on it at all, when i plug it in the charger it says "battery.png is missing, battery: 75%". I took my phone in to sprint and they did a reset although that didnt do anything so there sending me a new one. Now my question is, is there any way I can open up my phones folder so i can get my pictures and everything that was on it? My pics were very important to me and i dont want to lose them, thats all i need so if some could help me get them that would be much appreciated, thanks.
Click to expand...
Click to collapse
I ran OpTiMuS for a long time and every time I would try new roms, decide I didn't like or whatever and go back, I'd always have to 1. Dial ##72786# 2. Let it self activate sometimes twice, but usually just once before I would pick up 3g/4g. May have just been my phone but you may try that out if you go back to optimus De. Over all, my favorite stock like rom though.
Sent from my Optimus G using XDA Premium 4 mobile app
Title says it really. No problem rooting using One Click CF Autoroot and Heimdall-frontend and planned to install Xposedframework. Got the usual warning screen with the option to cancel or continue - but only the cancel button works. Continue is dead. Tried another couple of.apk 's with the same result. Any ideas anyone - or am I heading for CM11 (which runs fine on my S1 and S3 - so I'm not sure I need to ask)
Sorted. Turns out it was a night filter I was using. Flashed CM 11 anyway and should probably have done it earlier. Samsungs version was pretty. horrible
Sent from my SM-T310 using XDA Premium 4 mobile app
So after taking a OTA that went out a couple weeks ago in hopes in was lollipop I found myself without root... PurpleDrake doesn't work, stump doesnt work... PurpleDrake says I have root but thats clearly not the case because after I reboot it there is not root. I checked and the software version is 10r. Has anyone else gotten root to work on 10r? They also decided to disable download mode because I have tired at least 20 times and all I ever get is the charging animation. Is anyone else even on 10r? I really just want to smash this phone with a hammer now because I have tried everything.
There is clearly something wrong because if I open stump root it says rooted, but if I try and open twrp manager it says root is required for this app and closes.... where is my sledge hammer....
Have you tried this method? http://forum.xda-developers.com/showthread.php?t=3004158
Worked on mine after PD failed.
I can get as far as the fakesu promot, but even if I just ls /temp it hangs and doesnt do anything. Im pretty sure there are gremlins in this phone.
Turns out that for some reason ADB doesn't play well with my USB 3.0 controller. Plugged it into a 2.0 port and it worked fine the first try. Seems legit...
I went through the whole hammer/smash phase with 10r as well. I downgraded, rooted(super smoothly), flashed 10r update through odin to get rid of FU notification(Firmware Update). Running smoothly since. With purpledrake btw.
It's weird... I dirty flashed the 10r zip over the stock software that came with our phones (10c?), and right after it asked if I wanted to flash Super SU, which I did, and that was it. Been rooted the whole time.
Sent from my LG-D851 using Xparent Red Tapatalk 2
Armandopjr, where did you get the 10r zip? Do you have a link?
tofi1 said:
Armandopjr, where did you get the 10r zip? Do you have a link?
Click to expand...
Click to collapse
Maybe here:
http://forum.xda-developers.com/tmobile-lg-g3/development/stock-rom-kvt49l-d85110r-t2961261
Perfect, thank you.