Related
Hi, I'm a italian girl, and I modded perfecly my Captivate Glide bought from america! I installed a lot of roms without problems.
I'd like to know if I'll can put the original AT&T rom (with italian language).
Where can I find it?
Thank you so much!
astromariopion said:
Hi, I'm a italian girl, and I modded perfecly my Captivate Glide bought from america! I installed a lot of roms without problems.
I'd like to know if I'll can put the original AT&T rom (with italian language).
Where can I find it?
Thank you so much!
Click to expand...
Click to collapse
You can get your stock AT&T firmware at sammy's FIrmware http://www.sammobile.com you will have to create an account to download then use Odin to flash it.
Wow! So fast reply! :laugh:
Thank you very much! :angel:
Can I install it with ClockworkMod, or it is possible only with Odin?
astromariopion said:
Wow! So fast reply! :laugh:
Thank you very much! :angel:
Can I install it with ClockworkMod, or it is possible only with Odin?
Click to expand...
Click to collapse
ODIN only sorry.
I put the original firmware on my device with Odin, but now I can read anly "android" on the screen... Is it normal? I think I must wait... Android logo appears and disappears! Seems to be trying to start...
Another italian captivater!!
We are maybe only the two of us in the whole country, so let's be proud! !!
astromariopion said:
I put the original firmware on my device with Odin, but now I can read anly "android" on the screen... Is it normal? I think I must wait... Android logo appears and disappears! Seems to be trying to start...
Click to expand...
Click to collapse
Wat do u mean on the screen? Like when the phone is booting up???
phatryan69 said:
Wat do u mean on the screen? Like when the phone is booting up???
Click to expand...
Click to collapse
I had put the stock ICS on my Glide and decided to flash back to 2.3.6 (from samfirmware) using Odin. After Odin loads the ROM to the phone, and the phone reboots, it sits at the screen that says SAMSUNG. I let the phone sit for about an hour before I pulled the battery and reinstalled the stock ICS back onto the phone. Any ideas why I am unable to flash from ICS to 2.3.6?
There is no 2.3.6 ROM, the version on samfirmware and everywhere else stock is 2.3.5 there is no flashable 2.3.6, anyway I suggest you download the ROM again, and try to flash.
As an alternate, flash CWM, then use a custom GB rom, boot the phone and then flash stock GB, but I'd recommend the ODIN method first.
I Have downloaded the 2.3.5 from and tried flashing several times. I will try a custom rom method. Thank you
Sent from my SGH-I927 using xda premium
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
johnny7788 said:
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
Click to expand...
Click to collapse
can u try another computer with same ver of firmware & odin
johnny7788 said:
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
Click to expand...
Click to collapse
As you are getting Galaxy Gio splash screen, its just a soft brick. Make sure you've installed Samsung Kies and make sure its not running in background (Check the Taskbar systray) while you run Odin. Download the firmware from sammobile.com and install as mentioned in Tutorial (You may find it in the Galaxy Gio section)
Dont use the pit its from later galaxy models
Make sure u flash galaxy gio FW and look for the guides in thr GIO section
Sent from my ST25i using xda app-developers app
tried it
coolsandie said:
As you are getting Galaxy Gio splash screen, its just a soft brick. Make sure you've installed Samsung Kies and make sure its not running in background (Check the Taskbar systray) while you run Odin. Download the firmware from sammobile.com and install as mentioned in Tutorial (You may find it in the Galaxy Gio section)
Click to expand...
Click to collapse
ive used 3 different versions of odin 4.38 4.42 and odin3 v1.85 I cant get to the splash screen just the galaxy gio screen only odin3 v1.85 can read it but at the galaxy gio screen not in download mode ive tried 1click unsoft brick it asks me if my phone is plugged in and in download mode ive made sure kies wasn't running as well everytime I tried and kies 2.0 doesn't support my device it tells me,and that's also at the galaxy gio screen in download mode it doesn't even show up im also running windows 8 as well if that helps anyone figure this problem out for me
used new ops files too
SpaceCaker said:
Dont use the pit its from later galaxy models
Make sure u flash galaxy gio FW and look for the guides in thr GIO section
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
ive used the pit file but not before I used gio v1.0 ops and cooper ops files also none worked
Soft bricked Gio
I rooted my gio with the gio rooting package and tried to flash cwm recovery. Unfortunatlely I forgot to reset and uncheck re-partition and now my phone gives me the Phone---!----computer logo when I boot. (soft brick I think) Even though I have kies, it now does not recognise my phone, and nor does odin. In addition, I need the 2.3.6 Gingerbread NZ stock rom from 2degrees, yet I cannot find it on any of the sites I visit. I can get into download mode but not recovery... can anyone help? Any help will be appreciated, if it is possible to fix my phone
s4meq said:
I rooted my gio with the gio rooting package and tried to flash cwm recovery. Unfortunatlely I forgot to reset and uncheck re-partition and now my phone gives me the Phone---!----computer logo when I boot. (soft brick I think) Even though I have kies, it now does not recognise my phone, and nor does odin. In addition, I need the 2.3.6 Gingerbread NZ stock rom from 2degrees, yet I cannot find it on any of the sites I visit. I can get into download mode but not recovery... can anyone help? Any help will be appreciated, if it is possible to fix my phone
Click to expand...
Click to collapse
ClockworkMod (cwm) http://forum.xda-developers.com/showthread.php?t=1421650
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android-how-to/what-odin-version-you-need-for-your-phone
Download GIO_v1.0,ops:http://HERE
gb_root:http://forum.xda-developers.com/showthread.php?t=1766178
http://www.sammobile.com/firmwares/
Phone now repaired
ptugalx said:
ClockworkMod (cwm) http://forum.xda-developers.com/showthread.php?t=1421650
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android-how-to/what-odin-version-you-need-for-your-phone
Download GIO_v1.0,ops:http://HERE
gb_root:http://forum.xda-developers.com/showthread.php?t=1766178
http://www.sammobile.com/firmwares/
Click to expand...
Click to collapse
My phone is now repaired, considering update.zip for 2.3.5. I will like to know if the recovery mentioned above requires a custom kernel- is it necessary? BTW I am not using Rom manager.
s4meq said:
My phone is now repaired, considering update.zip for 2.3.5. I will like to know if the recovery mentioned above requires a custom kernel- is it necessary? BTW I am not using Rom manager.
Click to expand...
Click to collapse
Does not require a custom-kernel.
upgrade to 2.3.6 and install this cwm.
cwm-5.0.2.7-ext4+rfs-odin.tar.md5 (Flash With ODIN)
can't update
ptugalx said:
Does not require a custom-kernel.
upgrade to 2.3.6 and install this cwm.
cwm-5.0.2.7-ext4+rfs-odin.tar.md5 (Flash With ODIN)
Click to expand...
Click to collapse
No, 2.3.5 is the latest version for my phone's firmware (so no update to 2.3.6)... will I still be able to use this?Please tell me. Also I am considering installing through recovery instead.
s4meq said:
No, 2.3.5 is the latest version for my phone's firmware (so no update to 2.3.6)... will I still be able to use this?Please tell me. Also I am considering installing through recovery instead.
Click to expand...
Click to collapse
see it here_http://forum.xda-developers.com/showthread.php?t=1342190
Thanks
ptugalx said:
see it here_http://forum.xda-developers.com/showthread.php?t=1342190
Click to expand...
Click to collapse
Well, just installed through recovery and pheixz CWM recovery works like a charm. I am now using cm 9 by maclaw. Just a signal problem as this phone was bought from overseas
s4meq said:
A signal problem as this phone was bought from overseas
Click to expand...
Click to collapse
Flash your country's baseband.
Thanks
waqaswasil said:
Flash your country's baseband.
Click to expand...
Click to collapse
This is what Im doing, but why odin v3.09? I have the ops file and the correct version of Odin. (v4.42)
http://www.sammobile.com/firmwares/3/?download=8660
I also want just the baseband.
I did it, but..
waqaswasil said:
Flash your country's baseband.
Click to expand...
Click to collapse
Still a signal problem on maclaws cyanogenmod. Maybe I should have flashed the PDA instead (S5660XXKT6) not the MODEM...
http://www.sammobile.com/firmwares/3/?download=8660
I want to try Maclaw's ASOP platform. What filesystem does it use? EXT4 or RFS?
s4meq said:
Still a signal problem on maclaws cyanogenmod. Maybe I should have flashed the PDA instead (S5660XXKT6) not the MODEM...
http://www.sammobile.com/firmwares/3/?download=8660
I want to try Maclaw's ASOP platform. What filesystem does it use? EXT4 or RFS?
Click to expand...
Click to collapse
Maybe You Have A Hardware (Antenna) Problem, Not A Software (Baseband) Problem
All Custom ROMs Use EXT4 Filesystem
BTW Its AOSP. Not ASOP :silly:
waqaswasil said:
Maybe You Have A Hardware (Antenna) Problem, Not A Software (Baseband) Problem
All Custom ROMs Use EXT4 Filesystem
BTW Its AOSP. Not ASOP :silly:
Click to expand...
Click to collapse
No... There was no water damage, only 1 drop 2 years ago which the phone survived. It was from knee height. I flashed the S5660KKT3 baseband through Odin. Is it the right one? Also, my phone was broken and I got it repaired. when it came back the signal was 5 bars, when I put my SIM card in, but when I installed maclaw's cm9 it was poor. Reboots seem to fix the problem.
Hello guys!
I have an Ace2 (which was on Android 2.3.6) and tried to install CM11. At first it didn't work, because I had no CWM. So I flashed a Kernel with CWM and installed the CM11-ROM via CWM. That was no problem. But when I was setting up the ROM, I realised that I had no mobile/phone connection at all.
So I tried to install a few stock firmwares via Odin. The installation always finishes with no errors. But when I boot the phone it does not get any further than to the Samsung-startscreen.
And I can't access the recovery mode anymore! Only Odin-Mode is still possible.
Is there an option to get my phone back to some kind of stock state.
Please help me out!
Guvoro said:
Hello guys!
I have an Ace2 (which was on Android 2.3.6) and tried to install CM11. At first it didn't work, because I had no CWM. So I flashed a Kernel with CWM and installed the CM11-ROM via CWM. That was no problem. But when I was setting up the ROM, I realised that I had no mobile/phone connection at all.
So I tried to install a few stock firmwares via Odin. The installation always finishes with no errors. But when I boot the phone it does not get any further than to the Samsung-startscreen.
And I can't access the recovery mode anymore! Only Odin-Mode is still possible.
Is there an option to get my phone back to some kind of stock state.
Please help me out!
Click to expand...
Click to collapse
Try to re-flash into stock rom, the jellybean version. If you had a problem with the network maybe there's something wrong with the csc file
Guvoro said:
Hello guys!
I have an Ace2 (which was on Android 2.3.6) and tried to install CM11. At first it didn't work, because I had no CWM. So I flashed a Kernel with CWM and installed the CM11-ROM via CWM. That was no problem. But when I was setting up the ROM, I realised that I had no mobile/phone connection at all.
So I tried to install a few stock firmwares via Odin. The installation always finishes with no errors. But when I boot the phone it does not get any further than to the Samsung-startscreen.
And I can't access the recovery mode anymore! Only Odin-Mode is still possible.
Is there an option to get my phone back to some kind of stock state.
Please help me out!
Click to expand...
Click to collapse
-downgrade to gb
-flash stock jb via odin
-flash cm11
-search
Sent from my GT-I8160 using Tapatalk
teddytsen said:
-downgrade to gb
-flash stock jb via odin
-flash cm11
-search
Click to expand...
Click to collapse
That's what I'm trying now. I thought I already tried to downgrade to GB but after looking on the filenames of the different firmwares I tried, I noticed that they are all JB's.
Thank you for the replys. Currently I'm waiting for my GB-firmware to download...
You havr to use the 3 part firmware to downgrade.
Sent from my GT-I8160 using Tapatalk
teddytsen said:
You havr to use the 3 part firmware to downgrade.
Click to expand...
Click to collapse
Where do I get that firmware from?!
Link is somewhere in this thread http://forum.xda-developers.com/showthread.php?t=2141930
if u will get bootloop after installing GB, go into recovery (if u will get that possibility) and wipe it, btw, did i understood well? U flashed CM11 when u have been on GB?
---------- Post added at 07:20 PM ---------- Previous post was at 07:17 PM ----------
U can also try to flash stock GB/JB (depends on which firmware u have now) kernel separatly. Ramdisk (u have recovery in it) is flashed with kernel so it can help
artur1131 said:
did i understood well? U flashed CM11 when u have been on GB?
Yes! That's what I did!
Click to expand...
Click to collapse
That was stupid
Well try this 3-file GB that i given to u and tell us if it worked.
artur1131 said:
That was stupid
Well try this 3-file GB that i given to u and tell us if it worked.
Click to expand...
Click to collapse
NOW I KNOW TOO! :silly:
I have to stock upgrade to JB first, BEFORE I flash custom JB ROMs.
I'm already loading a 3-part firmware, from that thread you gave me. Although the first link did not work, I hope there is the same (3-part) firmware in the second link.
U mean u are downloading from this link http://d-h.st/AZN ? (I8160XXLK6.zip)
Yes, its definetly GB stock rom, i was forced to use I8160XXLK6 (not from this link, but still) when i messed up my phone few weeks ago (same problem i could enter only odin-mode)
artur1131 said:
U mean u are downloading from this link http://d-h.st/AZN ? (I8160XXLK6.zip)
Yes, its definetly GB stock rom, i was forced to use I8160XXLK6 (not from this link, but still) when i messed up my phone few weeks ago (same problem i could enter only odin-mode)
Click to expand...
Click to collapse
Yep, that's exactly what I'm downloading @ the moment.
And those are the 3 parts for Odin which should bring the phone back to GB-stock?
PDA: CODE_GT-I8160_I8160XXLK6_CL1211243_REV00_user_SEC_KEY_LK6_4G.tar
CSC: CSC_GT-I8160-MULTI-CSC-OXELF1_SEC_KEY_4G.tar
PIT: GT-I8160_EUR_XX_4G
Did I get that right?
I just don't want to mess it up again...
And btw:
I already tried a I8160XXLK6 but it was a single-file firmware and had no effect on my problem.
I need the 3-parts including CSC and PIT, right?
It doesnt work? Huh dunno why.
Lets trust @teddysten and upgrade to JB, it might work
If it wont u will have to do some research and find 3-part GB rom
The single-file firmware did not work for me!
I haven't tried the 3-part firmware yet, from the link that you gave me. In about 10 minutes the download will be finished and I'm going to try it immediately!
Well. Remember that after flashing first booting (samsung logo ANIMATION) takes a while.
if u will still have this issue after downgrading to GB then upgrade it from this to JB anyway because it might work (dont ask me how, i dont know how so i wont explain). For now im out and ill visit XDA tommorow (earliest).
soo Good Luck and i hope that others will help u too if u will get some problems.
I am here if you need help
What version of you Odin do you have ?
Ok...
I downloaded the 3-part firmware to get back to GB stock.
That worked.
Then I installed the original JB-firmware from my provider.
That worked too.
So I'm happy again and everything is working!
Thanx a lot guys!!!!! :highfive:
Guvoro said:
Ok...
I downloaded the 3-part firmware to get back to GB stock.
That worked.
Then I installed the original JB-firmware from my provider.
That worked too.
So I'm happy again and everything is working!
Thanx a lot guys!!!!! :highfive:
Click to expand...
Click to collapse
Well you've learnt your lesson. Never try to flash from GB to KK
Sent from my GT-I8160 using XDA Premium 4 mobile app
Thank you so much. I was in this EXACT situation (GB to KK) and tried everything; pretty much every GB single-file ROM I could file. The 3-part ROM did the trick though! DD I'm literally so grateful right now I put in the effort to sign up and post this thank you message... that's a lot of effort for me xD
Hey everyone
I have a huge problem with my ace 2, it is stuck on the Samsung logo and it won't go in recovery mode. Please, let me explain, I was fed up with my rooted 2.3 GB ace 2 and I decided to flash CM 10.2. I downloaded the .zip and flashed it along with the suitable gapps. After booting, I realised it did not have any signal and wifi was not available. After searching online for a while with not any results, I decided to flash CM 11. After that, wifi was back but still no signal. I said sc**w it and downloaded the official JB firmware for my phone from sammobile. After flashing it with odin, the phone won't boot. It stays in samsung screen. It won't even go in recovery mode in order to erase cache etc. I tried downgrading to the stock GB, ADB, KIES, DROID EXPLORER, the phone is recognised only in ODIN.
Can anyone help ?
-Thank you for your time
First Try odin with newest custom stocked rom. I got this "brick" couple times. And this think if working every time.
tsosmi_GR said:
Can anyone help ?
-Thank you for your time
Click to expand...
Click to collapse
Any (!!) CM needs JB FW at first...
I suggest to begin from scratch! Let the Phone boot completely after each FW flash.
1) Flash 3-Parted FW (see my sig) - Be sure you pick the correct one for you Phone (8160 / 8160P / 8160L)
2) Flash stock JB for your Phone and country
3) Flash CM11 and Gapps
fluffi444 said:
Any (!!) CM needs JB FW at first...
I suggest to begin from scratch! Let the Phone boot completely after each FW flash.
1) Flash 3-Parted FW (see my sig) - Be sure you pick the correct one for you Phone (8160 / 8160P / 8160L)
2) Flash stock JB for your Phone and country
3) Flash CM11 and Gapps
Click to expand...
Click to collapse
Hey man you saved me! Thank you very much! The three part rom did the trick! I bought an lg g3 this morning though thinkin my phone was totaled but Im gonna give my old (but thanks to you, working) ace 2 to my sister ..
Maybe this thread gonna help my prob.
Im accessing the thread by tapatalk and cant see what is your signature @fluffi444
Im suffering the same problem, the phone only able to enter downloadmode, i've tried install russian gingerbread with 3 file csc pda, and pit. But it doesnt work.
Maybe i need something else.
Sent from my Moto G using Tapatalk
My Samsung note 2 won't move from the boot screen. It does boot into recovery when I press the buttons but it won't mount any files. Sideloading works through ADB but then that's just about it as it gives me errors. Tried to use Odin to unbrick it but it keeps giving me errors. What do I do? How do I unbrick my phone? I have posted a screenshot of the errors I am getting. Can someone please advise on what I should do?
boshez said:
My Samsung note 2 won't move from the boot screen. It does boot into recovery when I press the buttons but it won't mount any files. Sideloading works through ADB but then that's just about it as it gives me errors. Tried to use Odin to unbrick it but it keeps giving me errors. What do I do? How do I unbrick my phone? I have posted a screenshot of the errors I am getting. Can someone please advise on what I should do?
Click to expand...
Click to collapse
I have almost a same situation here with my brothers phone. I don't know why, but every time he manages to brick it like that. When booting into recovery from rom (power menu), it crashes the phone and it gets in a bootloop trying to get into the recovery.
What I did:
- Reflash recovery through odin (odin succes, phone fail)
- Reflash recovery through odin and erase nand (same...)
The only fix I found was to flash the stock rom and nand erase through odin, then flash the recovery (twrp 2.8.6.0), erase almost everything (sys, data, cache) and flash custom rom.
Looking at your pic, after nand write it fails, it could be that your nand chip is dead, and if it is like that, move to an other phone, it isn't worth to get a new mobo for your phone, those things cost more than 100 euro and a great new phone would get about 250 from you (like that asus zenfone, I think that is the one you should aim for if you want mid class to high class phones)
boshez said:
My Samsung note 2 won't move from the boot screen. It does boot into recovery when I press the buttons but it won't mount any files. Sideloading works through ADB but then that's just about it as it gives me errors. Tried to use Odin to unbrick it but it keeps giving me errors. What do I do? How do I unbrick my phone? I have posted a screenshot of the errors I am getting. Can someone please advise on what I should do?
Click to expand...
Click to collapse
The firmware you trying to flash xxalj3 (saw at screenshot) is very old 4.1.1 with sds bug also. Probably your phone has newer bootloader and 4 this you can't flash it, download latest firmware from Sammy and try again.
Sent from my GT-N7100
So I found out that my phone went through SDS. Had to get a new eMMC chip. the imei number got screwed up as well.
boshez said:
So I found out that my phone went through SDS. Had to get a new eMMC chip. the imei number got screwed up as well.
Click to expand...
Click to collapse
Sorry to hear this.
Sent from my GT-N7100
vagsvag said:
Sorry to hear this.
Sent from my GT-N7100
Click to expand...
Click to collapse
Got my phone to start working again after I installed a new eMMC. However when I updated it to a 4.4.2 Stock ROM, it won't register on to the network.
boshez said:
Got my phone to start working again after I installed a new eMMC. However when I updated it to a 4.4.2 Stock ROM, it won't register on to the network.
Click to expand...
Click to collapse
Your imei is normal or something 0004....? Corrupted general imei
Sent from my GT-N7100
vagsvag said:
Your imei is normal or something 0004....? Corrupted general imei
Sent from my GT-N7100
Click to expand...
Click to collapse
IMEI is the same as the one on the phone. I believe I must have installed the wrong ROM. I installed the N7100XXUFNL1 one which said Pakistan but then now that I checked it again, I found out it was for Nigeria, UAE, etc (which share the same CSC). Now I am downloading the N7100XXUFND4 one. Hope it makes a difference. I did backup my IMEI etc incase there is an issue.
boshez said:
IMEI is the same as the one on the phone. I believe I must have installed the wrong ROM. I installed the N7100XXUFNL1 one which said Pakistan but then now that I checked it again, I found out it was for Nigeria, UAE, etc (which share the same CSC). Now I am downloading the N7100XXUFND4 one. Hope it makes a difference. I did backup my IMEI etc incase there is an issue.
Click to expand...
Click to collapse
Samsung had made efs partition update when released 4.3 if I remember well. This update was making by the kernel when was flashing the fw was updating the efs too. If you haven't flash original firmware via odin 4.3 or later probably your efs is not updated. Try to flash original fw via odin, I think it will work.
Sent from my GT-N7100