Hi, I'm a italian girl, and I modded perfecly my Captivate Glide bought from america! I installed a lot of roms without problems.
I'd like to know if I'll can put the original AT&T rom (with italian language).
Where can I find it?
Thank you so much!
astromariopion said:
Hi, I'm a italian girl, and I modded perfecly my Captivate Glide bought from america! I installed a lot of roms without problems.
I'd like to know if I'll can put the original AT&T rom (with italian language).
Where can I find it?
Thank you so much!
Click to expand...
Click to collapse
You can get your stock AT&T firmware at sammy's FIrmware http://www.sammobile.com you will have to create an account to download then use Odin to flash it.
Wow! So fast reply! :laugh:
Thank you very much! :angel:
Can I install it with ClockworkMod, or it is possible only with Odin?
astromariopion said:
Wow! So fast reply! :laugh:
Thank you very much! :angel:
Can I install it with ClockworkMod, or it is possible only with Odin?
Click to expand...
Click to collapse
ODIN only sorry.
I put the original firmware on my device with Odin, but now I can read anly "android" on the screen... Is it normal? I think I must wait... Android logo appears and disappears! Seems to be trying to start...
Another italian captivater!!
We are maybe only the two of us in the whole country, so let's be proud! !!
astromariopion said:
I put the original firmware on my device with Odin, but now I can read anly "android" on the screen... Is it normal? I think I must wait... Android logo appears and disappears! Seems to be trying to start...
Click to expand...
Click to collapse
Wat do u mean on the screen? Like when the phone is booting up???
phatryan69 said:
Wat do u mean on the screen? Like when the phone is booting up???
Click to expand...
Click to collapse
I had put the stock ICS on my Glide and decided to flash back to 2.3.6 (from samfirmware) using Odin. After Odin loads the ROM to the phone, and the phone reboots, it sits at the screen that says SAMSUNG. I let the phone sit for about an hour before I pulled the battery and reinstalled the stock ICS back onto the phone. Any ideas why I am unable to flash from ICS to 2.3.6?
There is no 2.3.6 ROM, the version on samfirmware and everywhere else stock is 2.3.5 there is no flashable 2.3.6, anyway I suggest you download the ROM again, and try to flash.
As an alternate, flash CWM, then use a custom GB rom, boot the phone and then flash stock GB, but I'd recommend the ODIN method first.
I Have downloaded the 2.3.5 from and tried flashing several times. I will try a custom rom method. Thank you
Sent from my SGH-I927 using xda premium
Related
I want to try a ICS build rooted, but i cant install a CWM because my phone freeze (i try a lot of things, i have 2 thread a bout that but never found a solution) the only Version that work for me is de ICS,so, i want to install one rooted ICS via odin.Is that possible?
EDIT: sorry, i made a mistake with the title, i want a rooted rom ocustom rom (ICS) via odin
CWM ROMs will not install via Odin. Make sure the ROM is made for the Captivate Glide. If it isn't, it won't work. Make sure the ROM comes with a kernel built for ICS. When flashing the ROM, are there any errors shown in CWM?
Sent from my CM10 Glide
Devian50 said:
CWM ROMs will not install via Odin. Make sure the ROM is made for the Captivate Glide. If it isn't, it won't work. Make sure the ROM comes with a kernel built for ICS. When flashing the ROM, are there any errors shown in CWM?
Sent from my CM10 Glide
Click to expand...
Click to collapse
thanks for your answer, i already fix the problem with the help in other thread (thanks to Rawr0w0) the GB roms still freeze, but the ics works great and rooted
lorddavid said:
thanks for your answer, i already fix the problem with the help in other thread (thanks to Rawr0w0) the GB roms still freeze, but the ics works great and rooted
Click to expand...
Click to collapse
How did you rooted the ics??? my phone freeze everytime i try to flash the cwm.
yako140891 said:
How did you rooted the ics??? my phone freeze everytime i try to flash the cwm.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1953672
try it, there is the solution in that thread. Do exactly what say in the thread and everything will work.
Just a question, your captivate glide is the canadian version? (Rogers)
lorddavid said:
http://forum.xda-developers.com/showthread.php?t=1953672
try it, there is the solution in that thread. Do exactly what say in the thread and everything will work.
Just a question, your captivate glide is the canadian version? (Rogers)
Click to expand...
Click to collapse
it was from rogers now its unlocked i exactly did what say in that thread but when i flash the boot and the stock rooted rom my phone starts to freeze
yako140891 said:
it was from rogers now its unlocked i exactly did what say in that thread but when i flash the boot and the stock rooted rom my phone starts to freeze
Click to expand...
Click to collapse
I see that the Glides with problems are the rogers version, maybe something in software is not the samewith ATT.
first flash the GB kernel (use the overclocked, that was the one that i use), dont select any in odin (f reset for example), restart the phone manually and get back in odin onmediatly and flash the rooted rom. after that, the phone will boot in GB,now flashwit superoneclick ICS and follow the rest of the thread.
I dont know, but its works fine when i dont select any in odin (f reset, etc)
lorddavid said:
I see that the Glides with problems are the rogers version, maybe something in software is not the samewith ATT.
first flash the GB kernel (use the overclocked, that was the one that i use), dont select any in odin (f reset for example), restart the phone manually and get back in odin onmediatly and flash the rooted rom. after that, the phone will boot in GB,now flashwit superoneclick ICS and follow the rest of the thread.
I dont know, but its works fine when i dont select any in odin (f reset, etc)
Click to expand...
Click to collapse
well my phone don't boot on GB it freezez everytime i flash the rooted rom, even when i flash the kernel with odin (uncheked all) then manually reboot and immediately enter on download mode and flash the rooted rom my phone jus freeze
yako140891 said:
well my phone don't boot on GB it freezez everytime i flash the rooted rom, even when i flash the kernel with odin (uncheked all) then manually reboot and immediately enter on download mode and flash the rooted rom my phone jus freeze
Click to expand...
Click to collapse
wich kernel are you using? i use the overclocked, try starting from ICS with superoneclick, then do the process again, i dont know, that worksfor me, start again from ICS,and use the kernel overclocked.
lorddavid said:
wich kernel are you using? i use the overclocked, try starting from ICS with superoneclick, then do the process again, i dont know, that worksfor me, start again from ICS,and use the kernel overclocked.
Click to expand...
Click to collapse
finally i could run cwm on ics but then it freezed on cwm and cant access cwm again did you had that problem???im going to do everything again
yako140891 said:
finally i could run cwm on ics but then it freezed on cwm and cant access cwm again did you had that problem???im going to do everything again
Click to expand...
Click to collapse
Yes, i has that problem, but no more, (dont know if freeze only with usb plug or not) i already has all those problem, but fixe it doing all that say the thread
PD: Again, sorry if i have bad english
lorddavid said:
Yes, i has that problem, but no more, (dont know if freeze only with usb plug or not) i already has all those problem, but fixe it doing all that say the thread
PD: Again, sorry if i have bad english
Click to expand...
Click to collapse
A much simpler way to root your phone is to just Odin clockworkmod recovery then wipe all and format all and flash a rooted ROM.. Takes 5 min
Sent from my Inspire 4G using xda premium
dman3285 said:
A much simpler way to root your phone is to just Odin clockworkmod recovery then wipe all and format all and flash a rooted ROM.. Takes 5 min
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Yes, i try that, but when i just simply flash clockworkmod via odin, then the phone freeze when i enter in the recovery, to make the recovery work, i do all that say in that thread and works perfect, dont know why.
yako140891 is having the same problem that i has before, and i now that is software problem because is fixed in my phone, but dont know exactly why the phone freeze.
PD: all the phones that have this problem, are from Rogers, maybe is something different but dont know
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
johnny7788 said:
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
Click to expand...
Click to collapse
can u try another computer with same ver of firmware & odin
johnny7788 said:
I just got my phone and i rooted it and downloaded clockwork recovery but i got it from someone else and the only way to get rid of his info was to factory reset which i did while it was rooted now my phone wont go past the galaxy gio screen i trick 1 click unbrick and odin i downloaded the pack so i have all of them and the ops and pit file and the original firmware and the samsung usb driver for mobile but odins com port wont recognize my phone the guy i bought it from got it in kuwait so its the arabic version of gt-s5660 could that be the problem
Click to expand...
Click to collapse
As you are getting Galaxy Gio splash screen, its just a soft brick. Make sure you've installed Samsung Kies and make sure its not running in background (Check the Taskbar systray) while you run Odin. Download the firmware from sammobile.com and install as mentioned in Tutorial (You may find it in the Galaxy Gio section)
Dont use the pit its from later galaxy models
Make sure u flash galaxy gio FW and look for the guides in thr GIO section
Sent from my ST25i using xda app-developers app
tried it
coolsandie said:
As you are getting Galaxy Gio splash screen, its just a soft brick. Make sure you've installed Samsung Kies and make sure its not running in background (Check the Taskbar systray) while you run Odin. Download the firmware from sammobile.com and install as mentioned in Tutorial (You may find it in the Galaxy Gio section)
Click to expand...
Click to collapse
ive used 3 different versions of odin 4.38 4.42 and odin3 v1.85 I cant get to the splash screen just the galaxy gio screen only odin3 v1.85 can read it but at the galaxy gio screen not in download mode ive tried 1click unsoft brick it asks me if my phone is plugged in and in download mode ive made sure kies wasn't running as well everytime I tried and kies 2.0 doesn't support my device it tells me,and that's also at the galaxy gio screen in download mode it doesn't even show up im also running windows 8 as well if that helps anyone figure this problem out for me
used new ops files too
SpaceCaker said:
Dont use the pit its from later galaxy models
Make sure u flash galaxy gio FW and look for the guides in thr GIO section
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
ive used the pit file but not before I used gio v1.0 ops and cooper ops files also none worked
Soft bricked Gio
I rooted my gio with the gio rooting package and tried to flash cwm recovery. Unfortunatlely I forgot to reset and uncheck re-partition and now my phone gives me the Phone---!----computer logo when I boot. (soft brick I think) Even though I have kies, it now does not recognise my phone, and nor does odin. In addition, I need the 2.3.6 Gingerbread NZ stock rom from 2degrees, yet I cannot find it on any of the sites I visit. I can get into download mode but not recovery... can anyone help? Any help will be appreciated, if it is possible to fix my phone
s4meq said:
I rooted my gio with the gio rooting package and tried to flash cwm recovery. Unfortunatlely I forgot to reset and uncheck re-partition and now my phone gives me the Phone---!----computer logo when I boot. (soft brick I think) Even though I have kies, it now does not recognise my phone, and nor does odin. In addition, I need the 2.3.6 Gingerbread NZ stock rom from 2degrees, yet I cannot find it on any of the sites I visit. I can get into download mode but not recovery... can anyone help? Any help will be appreciated, if it is possible to fix my phone
Click to expand...
Click to collapse
ClockworkMod (cwm) http://forum.xda-developers.com/showthread.php?t=1421650
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android-how-to/what-odin-version-you-need-for-your-phone
Download GIO_v1.0,ops:http://HERE
gb_root:http://forum.xda-developers.com/showthread.php?t=1766178
http://www.sammobile.com/firmwares/
Phone now repaired
ptugalx said:
ClockworkMod (cwm) http://forum.xda-developers.com/showthread.php?t=1421650
ODIN Multi Downloader 4.42:http://www.samsungupdate.com/android-how-to/what-odin-version-you-need-for-your-phone
Download GIO_v1.0,ops:http://HERE
gb_root:http://forum.xda-developers.com/showthread.php?t=1766178
http://www.sammobile.com/firmwares/
Click to expand...
Click to collapse
My phone is now repaired, considering update.zip for 2.3.5. I will like to know if the recovery mentioned above requires a custom kernel- is it necessary? BTW I am not using Rom manager.
s4meq said:
My phone is now repaired, considering update.zip for 2.3.5. I will like to know if the recovery mentioned above requires a custom kernel- is it necessary? BTW I am not using Rom manager.
Click to expand...
Click to collapse
Does not require a custom-kernel.
upgrade to 2.3.6 and install this cwm.
cwm-5.0.2.7-ext4+rfs-odin.tar.md5 (Flash With ODIN)
can't update
ptugalx said:
Does not require a custom-kernel.
upgrade to 2.3.6 and install this cwm.
cwm-5.0.2.7-ext4+rfs-odin.tar.md5 (Flash With ODIN)
Click to expand...
Click to collapse
No, 2.3.5 is the latest version for my phone's firmware (so no update to 2.3.6)... will I still be able to use this?Please tell me. Also I am considering installing through recovery instead.
s4meq said:
No, 2.3.5 is the latest version for my phone's firmware (so no update to 2.3.6)... will I still be able to use this?Please tell me. Also I am considering installing through recovery instead.
Click to expand...
Click to collapse
see it here_http://forum.xda-developers.com/showthread.php?t=1342190
Thanks
ptugalx said:
see it here_http://forum.xda-developers.com/showthread.php?t=1342190
Click to expand...
Click to collapse
Well, just installed through recovery and pheixz CWM recovery works like a charm. I am now using cm 9 by maclaw. Just a signal problem as this phone was bought from overseas
s4meq said:
A signal problem as this phone was bought from overseas
Click to expand...
Click to collapse
Flash your country's baseband.
Thanks
waqaswasil said:
Flash your country's baseband.
Click to expand...
Click to collapse
This is what Im doing, but why odin v3.09? I have the ops file and the correct version of Odin. (v4.42)
http://www.sammobile.com/firmwares/3/?download=8660
I also want just the baseband.
I did it, but..
waqaswasil said:
Flash your country's baseband.
Click to expand...
Click to collapse
Still a signal problem on maclaws cyanogenmod. Maybe I should have flashed the PDA instead (S5660XXKT6) not the MODEM...
http://www.sammobile.com/firmwares/3/?download=8660
I want to try Maclaw's ASOP platform. What filesystem does it use? EXT4 or RFS?
s4meq said:
Still a signal problem on maclaws cyanogenmod. Maybe I should have flashed the PDA instead (S5660XXKT6) not the MODEM...
http://www.sammobile.com/firmwares/3/?download=8660
I want to try Maclaw's ASOP platform. What filesystem does it use? EXT4 or RFS?
Click to expand...
Click to collapse
Maybe You Have A Hardware (Antenna) Problem, Not A Software (Baseband) Problem
All Custom ROMs Use EXT4 Filesystem
BTW Its AOSP. Not ASOP :silly:
waqaswasil said:
Maybe You Have A Hardware (Antenna) Problem, Not A Software (Baseband) Problem
All Custom ROMs Use EXT4 Filesystem
BTW Its AOSP. Not ASOP :silly:
Click to expand...
Click to collapse
No... There was no water damage, only 1 drop 2 years ago which the phone survived. It was from knee height. I flashed the S5660KKT3 baseband through Odin. Is it the right one? Also, my phone was broken and I got it repaired. when it came back the signal was 5 bars, when I put my SIM card in, but when I installed maclaw's cm9 it was poor. Reboots seem to fix the problem.
Hi,
My phone is samsung galaxy note 2 N7100
I bricked my phone when rooting with odin. And now I can only enter the download model, any other is not available. I am not really sure how bad this situation is and I would like to try this method firs (thttp://forum.xda-developers.com/showthread.php?t=2154890). However, I cannot download the recovery package/rom required by that method, link provided has gone.
So if anyone know where I can find this recovery package/rom (a zip including different file like PIT, CSC, MODEM, BOOTLOADER, CODE... ) for my N7100?
Or is there other ways to get my phone back?
I am really desperate now and any thoughts will be appreciated!
Thanks
rikku1983 said:
Hi,
My phone is samsung galaxy note 2 N7100
I bricked my phone when rooting with odin. And now I can only enter the download model, any other is not available. I am not really sure how bad this situation is and I would like to try this method firs (thttp://forum.xda-developers.com/showthread.php?t=2154890). However, I cannot download the recovery package/rom required by that method, link provided has gone.
So if anyone know where I can find this recovery package/rom (a zip including different file like PIT, CSC, MODEM, BOOTLOADER, CODE... ) for my N7100?
Or is there other ways to get my phone back?
I am really desperate now and any thoughts will be appreciated!
Thanks
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=2154890
issameerr said:
Try this : http://forum.xda-developers.com/showthread.php?t=2154890
Click to expand...
Click to collapse
Thanks, and I know this thread but I miss the recovery package/rom mentioned there for GT-N7100, cause the link provided there has gone.
Thank you though!
rikku1983 said:
Thanks, and I know this thread but I miss the recovery package/rom mentioned there for GT-N7100, cause the link provided there has gone.
Thank you though!
Click to expand...
Click to collapse
Did you flash 4.1.2 ? or greater? Try Samsung galaxy note 2 kit.. If you are able to enter the download mode, thats good.. you can flash using Odin or Heimdall. There are many rooted roms that will get you through. Dr Ketans has solutions. Try loading a stock rom from SAmmobile
Let me search for few links and post it from XDA devs
issameerr said:
Did you flash 4.1.2 ? or greater? Try Samsung galaxy note 2 kit.. If you are able to enter the download mode, thats good.. you can flash using Odin or Heimdall. There are many rooted roms that will get you through. Dr Ketans has solutions. Try loading a stock rom from SAmmobile
Let me search for few links and post it from XDA devs
Click to expand...
Click to collapse
I actually have several roms in hand and I tried
1 Pre-Rooted Stock ROMs Samsung Latest Sammy NA dr.ketan
2 N7100 Odin STOCK leaked 4.3 version (http://forum.xda-developers.com/showthread.php?t=2466405)
Neither can get me through, seconds after start of flashing, it fails.
So I worry a little about my situation...
But I will keep trying and thank you!
rikku1983 said:
I actually have several roms in hand and I tried
1 Pre-Rooted Stock ROMs Samsung Latest Sammy NA dr.ketan
2 N7100 Odin STOCK leaked 4.3 version (http://forum.xda-developers.com/showthread.php?t=2466405)
Neither can get me through, seconds after start of flashing, it fails.
So I worry a little about my situation...
But I will keep trying and thank you!
Click to expand...
Click to collapse
Dont flash 4.3.. Is your phone recognized by Odin, if yes, install Adb and try to push the rom and also check this : http://forum.xda-developers.com//showthread.php?t=1463756 and post your messages after DMESG|TAIL and LOGCAT..
issameerr said:
Dont flash 4.3.. Is your phone recognized by Odin, if yes, install Adb and try to push the rom and also check this : http://forum.xda-developers.com//showthread.php?t=1463756 and post your messages after DMESG|TAIL and LOGCAT..
Click to expand...
Click to collapse
Thank you bro, my phone is back. I think the problem might be odin3.07, cause I changed to odin1.3, flash stock 4.3 rom, it went through!
rikku1983 said:
Thank you bro, my phone is back. I think the problem might be odin3.07, cause I changed to odin1.3, flash stock 4.3 rom, it went through!
Click to expand...
Click to collapse
Cool.. Thats nice
Hello guys!
I have an Ace2 (which was on Android 2.3.6) and tried to install CM11. At first it didn't work, because I had no CWM. So I flashed a Kernel with CWM and installed the CM11-ROM via CWM. That was no problem. But when I was setting up the ROM, I realised that I had no mobile/phone connection at all.
So I tried to install a few stock firmwares via Odin. The installation always finishes with no errors. But when I boot the phone it does not get any further than to the Samsung-startscreen.
And I can't access the recovery mode anymore! Only Odin-Mode is still possible.
Is there an option to get my phone back to some kind of stock state.
Please help me out!
Guvoro said:
Hello guys!
I have an Ace2 (which was on Android 2.3.6) and tried to install CM11. At first it didn't work, because I had no CWM. So I flashed a Kernel with CWM and installed the CM11-ROM via CWM. That was no problem. But when I was setting up the ROM, I realised that I had no mobile/phone connection at all.
So I tried to install a few stock firmwares via Odin. The installation always finishes with no errors. But when I boot the phone it does not get any further than to the Samsung-startscreen.
And I can't access the recovery mode anymore! Only Odin-Mode is still possible.
Is there an option to get my phone back to some kind of stock state.
Please help me out!
Click to expand...
Click to collapse
Try to re-flash into stock rom, the jellybean version. If you had a problem with the network maybe there's something wrong with the csc file
Guvoro said:
Hello guys!
I have an Ace2 (which was on Android 2.3.6) and tried to install CM11. At first it didn't work, because I had no CWM. So I flashed a Kernel with CWM and installed the CM11-ROM via CWM. That was no problem. But when I was setting up the ROM, I realised that I had no mobile/phone connection at all.
So I tried to install a few stock firmwares via Odin. The installation always finishes with no errors. But when I boot the phone it does not get any further than to the Samsung-startscreen.
And I can't access the recovery mode anymore! Only Odin-Mode is still possible.
Is there an option to get my phone back to some kind of stock state.
Please help me out!
Click to expand...
Click to collapse
-downgrade to gb
-flash stock jb via odin
-flash cm11
-search
Sent from my GT-I8160 using Tapatalk
teddytsen said:
-downgrade to gb
-flash stock jb via odin
-flash cm11
-search
Click to expand...
Click to collapse
That's what I'm trying now. I thought I already tried to downgrade to GB but after looking on the filenames of the different firmwares I tried, I noticed that they are all JB's.
Thank you for the replys. Currently I'm waiting for my GB-firmware to download...
You havr to use the 3 part firmware to downgrade.
Sent from my GT-I8160 using Tapatalk
teddytsen said:
You havr to use the 3 part firmware to downgrade.
Click to expand...
Click to collapse
Where do I get that firmware from?!
Link is somewhere in this thread http://forum.xda-developers.com/showthread.php?t=2141930
if u will get bootloop after installing GB, go into recovery (if u will get that possibility) and wipe it, btw, did i understood well? U flashed CM11 when u have been on GB?
---------- Post added at 07:20 PM ---------- Previous post was at 07:17 PM ----------
U can also try to flash stock GB/JB (depends on which firmware u have now) kernel separatly. Ramdisk (u have recovery in it) is flashed with kernel so it can help
artur1131 said:
did i understood well? U flashed CM11 when u have been on GB?
Yes! That's what I did!
Click to expand...
Click to collapse
That was stupid
Well try this 3-file GB that i given to u and tell us if it worked.
artur1131 said:
That was stupid
Well try this 3-file GB that i given to u and tell us if it worked.
Click to expand...
Click to collapse
NOW I KNOW TOO! :silly:
I have to stock upgrade to JB first, BEFORE I flash custom JB ROMs.
I'm already loading a 3-part firmware, from that thread you gave me. Although the first link did not work, I hope there is the same (3-part) firmware in the second link.
U mean u are downloading from this link http://d-h.st/AZN ? (I8160XXLK6.zip)
Yes, its definetly GB stock rom, i was forced to use I8160XXLK6 (not from this link, but still) when i messed up my phone few weeks ago (same problem i could enter only odin-mode)
artur1131 said:
U mean u are downloading from this link http://d-h.st/AZN ? (I8160XXLK6.zip)
Yes, its definetly GB stock rom, i was forced to use I8160XXLK6 (not from this link, but still) when i messed up my phone few weeks ago (same problem i could enter only odin-mode)
Click to expand...
Click to collapse
Yep, that's exactly what I'm downloading @ the moment.
And those are the 3 parts for Odin which should bring the phone back to GB-stock?
PDA: CODE_GT-I8160_I8160XXLK6_CL1211243_REV00_user_SEC_KEY_LK6_4G.tar
CSC: CSC_GT-I8160-MULTI-CSC-OXELF1_SEC_KEY_4G.tar
PIT: GT-I8160_EUR_XX_4G
Did I get that right?
I just don't want to mess it up again...
And btw:
I already tried a I8160XXLK6 but it was a single-file firmware and had no effect on my problem.
I need the 3-parts including CSC and PIT, right?
It doesnt work? Huh dunno why.
Lets trust @teddysten and upgrade to JB, it might work
If it wont u will have to do some research and find 3-part GB rom
The single-file firmware did not work for me!
I haven't tried the 3-part firmware yet, from the link that you gave me. In about 10 minutes the download will be finished and I'm going to try it immediately!
Well. Remember that after flashing first booting (samsung logo ANIMATION) takes a while.
if u will still have this issue after downgrading to GB then upgrade it from this to JB anyway because it might work (dont ask me how, i dont know how so i wont explain). For now im out and ill visit XDA tommorow (earliest).
soo Good Luck and i hope that others will help u too if u will get some problems.
I am here if you need help
What version of you Odin do you have ?
Ok...
I downloaded the 3-part firmware to get back to GB stock.
That worked.
Then I installed the original JB-firmware from my provider.
That worked too.
So I'm happy again and everything is working!
Thanx a lot guys!!!!! :highfive:
Guvoro said:
Ok...
I downloaded the 3-part firmware to get back to GB stock.
That worked.
Then I installed the original JB-firmware from my provider.
That worked too.
So I'm happy again and everything is working!
Thanx a lot guys!!!!! :highfive:
Click to expand...
Click to collapse
Well you've learnt your lesson. Never try to flash from GB to KK
Sent from my GT-I8160 using XDA Premium 4 mobile app
Thank you so much. I was in this EXACT situation (GB to KK) and tried everything; pretty much every GB single-file ROM I could file. The 3-part ROM did the trick though! DD I'm literally so grateful right now I put in the effort to sign up and post this thank you message... that's a lot of effort for me xD
Hello, I used to be rooted with custom ROMs ect but went back to stock I317ATTALJ2 so I can give the phone to my daughter. Well everything went smooth until an update from AT&T came through and she ran it when the battery was at 21% but I'm not sure it that matter but didn't help in matters... Anyhow it ran the upgrade and on reboot it stayed on the Galaxy Note II screen and wont do anything but sit there. I let it sit for a long time before pulling the battery and booting but it goes to same screen and same thing. I can not get into recovery (Volume Up, Home, Pwr) but I can go into download mode. With the battery being so low I read that it charges while in download mode so for the remainder of the day I put the phone in download mode and plugged into charger.
Suggestions?
After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update ?.
Bajanman said:
After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update .
Click to expand...
Click to collapse
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!
Oxicottin said:
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!
Click to expand...
Click to collapse
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.
Bajanman said:
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.
Click to expand...
Click to collapse
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.
Oxicottin said:
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.
Click to expand...
Click to collapse
Yes you can flash a custom recovery from Odin. You just have to use the (Twrp) tar file found here>>>
http://bit.ly/1y0Tyg7
Find your device model and download the tar. And make sure you're downloading the correct file for your device ok!
I to use Twrp and luv it.?
OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?
Oxicottin said:
OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?
Click to expand...
Click to collapse
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Step 2 (no bootloader in here)
flash this to bring wifi back
but keep your knox free 4.1.2 bootloader.
Allowing you to freely flash between 4.1.2 roms and the latest 4.3 leak
Without having to one click,Keeping Wifi Throughout and removing Knox
Click to expand...
Click to collapse
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.
Bajanman said:
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.
Click to expand...
Click to collapse
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
I downloaded an app and it says im on.....
Bootloader Version: 1317UCUBMK6
Thanks!
Oxicottin said:
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
Thanks!
Click to expand...
Click to collapse
Ok not is back working again, which is great news ?. Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.
Bajanman said:
Ok not is back working again, which is great news . Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.
Click to expand...
Click to collapse
Ok, Im On 4.3 now and its working great.... Thank You!
Oxicottin said:
Ok, Im On 4.3 now and its working great.... Thank You!
Click to expand...
Click to collapse
You're very welcome glad I could help fix it.
Have a good day...
Ok problem solved so unsubscribing from this thread. If you run into any other problems you can always hit me up thru pm ?.