Develop Bugs

[Q] Cannot mount SD Card(clockworkmod)

Hi Experts,
I am getting serious problem in my clockworkmod recovery, I am not able to mount the card because of which I am not able to install any ROM, the thing is that I do not have any ROM installed on my phone so cannot go out from boot/recovery window.
I am getting error like when I try to open SD directory from recovery
can't mount /dev/block/mmcblk0
Please help I tried searching the thread but could not find any good solution.
Formatted the SD-card card also but no success

I am having the same problem here

Plz help expert , I tried to use another sd card also although it was old with 128 mb space but same error was shown in recovery,
it is the case the the sd port might have been corrupted?
then i think the phone is gone
plz help

Plz help guys...no one to suggest something ...m thinking of taking the phone at service center....but u i think warranty is void now ...as it is rooted...

ok soz i just read 1st post carefully, will help you momentairly
also i need to know is your phone S-OFF ?? (did you do the alpharev procedure or just unrevoked)
you must set up ADB on your pc : http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/ you dont need to do steps 3-5 since you already have the drivers (the same as rooting), you must download the ADB files from 'update' part after the step six, and dont do ADB devices cmd, do 'fastboot devices' while in fastboot mode (back+power) to check if you get a serial number (if yes it works if not you didnt do it right way)
when done, put your phone into fastboot mode (back+power) and in windows command prompt do :
fastboot oem enableqxdm 0
this should fix your SD, then go into recovery and check if you can mount your SD (USB storage) to use it in windows, if yes you are good if not that is an USB-brick, it is fixable so dont worry

Thanks for the help .... Will try this ASAP....hope it helps
Also my phone is NOT S-OFF...Do i need this before proceeding or can I solve the issue like this..??

you dont need S-OFF and, if you have USB-brick i dont think you can make this procedure
first, do what i told you (set up adb and enable your sd card) and check if your phone has any usb-connectivity
also this will help you - How to set up pc to use adb and fastboot (if you wont make it with unlockr method)
http://androidforums.com/desire-all...fastboot-windows-updated-1st-june-2011-a.html

XDA should make the search button NEON!!!!
http://forum.xda-developers.com/showthread.php?t=563298&page=3

thank dzumagos
I am now able to to mount SD card and able to see all files
but wen I run them thru recovery it show..
opening package.. then updating package.. then it returns to main screen of CWM recovery... does nothing ...this is happeing with all the zip files...

are you 100% sure the .zip file are OK ?
try downloading Oxygen ROM and flashing it.
also i do understand you can connect your phone with computer with USB cable [with USB storage enabled in recovery, does the windows see the FAT partition on sdcard] ?

check your md5 sums - or flash another recovery

Yes the zip files are OK i already installed them before (RCmixS)
but wen i mount from recovery the usb is not seen in windows...
but now m able to see the files in sd in recovery but cannot install ROM thru it..or run any zip file

usb brick ? Usb cannot be seen by windows?
http://forum.xda-developers.com/showthread.php?t=691187

If i insert USB separately thru adapter it can be seen but wen the mount thru recovery it is not seen..does this mean it has bricked ..windows says cannot recognize mass storage device...

plz help guys still no gain...cant install rom...

firstly lets try to flash a rom
http://forum.xda-developers.com/showthread.php?t=839640&highlight=clockworkmod
download clockworkmod 3.0.0.5 ZIP file and put it onto your SD
then boot into recovery and flash the downloaded CWM.zip, it should now boot up into clockworkmod 3.0.0.5
now try flashing a ROM (rcmixs or some AOPS - Oxygen or CM7)
you can also try with clockworkmod 3.2.0.1 (but 3.0.0.5 is better imho)
http://forum.xda-developers.com/showthread.php?t=1039954&highlight=clockworkmod
now hopefully you will have a bootable device. now the usb-brick.
all you need to know is in the 1st posts of this two threads
http://forum.xda-developers.com/showthread.php?t=691639
http://forum.xda-developers.com/showthread.php?t=1143252&highlight=usb-brick
also in the second thread there is 'visionary+' mentioned but you do not need it, since you are rooted already.
both threads describe the same method, read them and you will know what to do.
good luck
-----------------------
if for any reason you cant flash a ROM with a diffrent recovery then im outta ideas. someone else would have to figure out why cant you flash a ROM (not being able to flash a rom has got nothing to do with usb-brick)
just to be safe, try with oxygen.
----------------------
and if nothing works you could try a RUU (put phone into fastboot and then run the .exe file on PC and it will work) this should restore you to a Stock unrooted rom, but the USB-Brick will still be there, so you would need to do the method from 2nd thread with visionary+ to gain temp root

thanks a lot dzumagos
for all the help...will try it ...

simply try to change the recovery with unrevoked , download amonra recovery and it should work

But doesnt changing the recovery with unrevoked works when u have a ROM install...
As I do not have any ROM installed can I change the Recovery.....
the thing is I rooted the phone long back and now I forgot how I did it....need to search it ...
Also when I run CWM 3.0.0.5 thru recovery it changes to 3.0 but wen i reboot the recovery again CWM 2.5 comes
y is that so ??

yes it is the way it is supposed to be
it is called 'fake-flash' which means CWM 3.0.0.5 is flashed temporairly. so it is gone after a reboot. to flash it permanently you would have to be S-OFF which you are not but that is not a problem.
anyway were you able to flash a ROM using 3.0.0.5 or does is act the same as 2.5.0.7 ???? did you try with Oxygen rom ??

[Q] How do you format internal memory?

I know the formating option in cwm recovery but that only deletes the
data files it does not format the whole internal memory.
So how do you do this? i heard people just use oem lock
and oem unlock to relock the bootloaded and unlock it again since that seems
to wipe everything.
But i wanna know if theres legit command that does formatting of internal
storage for galaxy nexus?

best way is to use the fastboot commands
fastboot oem lock
fastboot oem unlock

0806sung said:
I know the formating option in cwm recovery but that only deletes the
data files it does not format the whole internal memory.
So how do you do this? i heard people just use oem lock
and oem unlock to relock the bootloaded and unlock it again since that seems
to wipe everything.
Click to expand...
Click to collapse
Zepius said:
best way is to use the fastboot commands
fastboot oem lock
fastboot oem unlock
Click to expand...
Click to collapse
That does not erase everything.
0806sung said:
But i wanna know if theres legit command that does formatting of internal
storage for galaxy nexus?
Click to expand...
Click to collapse
Yes. Reboot your device into fastboot and type the following:
fastboot erase system
fastboot erase userdata
fastboot erase boot
fastboot erase recovery
fastboot erase cache
Device is now wiped. You will need to flash a new ROM afterwards...

ive followed these steps and done all of the commands but now i cannot flash a rom.
im launched straight to fastboot, (as theres no rom) and it says no boot or recovery img.
i can get into CWM, but i see this.
E:Can't mount /sdcard/
any ideas anyone? think i need to look for a boot.img?

iamdarren said:
ive followed these steps and done all of the commands but now i cannot flash a rom.
im launched straight to fastboot, (as theres no rom) and it says no boot or recovery img.
i can get into CWM, but i see this.
E:Can't mount /sdcard/
any ideas anyone? think i need to look for a boot.img?
Click to expand...
Click to collapse
If you followed my steps above, you have effectively wiped your device (except the bootloader, radio and splash image).
You can't see /sdcard, because /sdcard is just a symlink to /data/media, which you just wiped.
You need to re-flash all the partitions that you just wiped. What ROM are you trying to flash, and how are you trying to flash it? If you are trying to flash a ROM in recovery and need /sdcard, you need to first flash the userdata partition with the stock userdata.img found in one of the images here.

great minds... i have already done that, went here http://code.google.com/android/nexus/images.html#yakju then flashed each .img one by one through nexus toolkit.
booted up into stock already. nice
thanks

I have the battery not charging issue. On top of that I can't fastboot my phone since it is not recognized by my PC. So how can I wipe the internal storage? I have only a certain amount of battery left. And I do not want to send all my private data to Samsung support.

ouilsen said:
I have the battery not charging issue. On top of that I can't fastboot my phone since it is not recognized by my PC. So how can I wipe the internal storage? I have only a certain amount of battery left. And I do not want to send all my private data to Samsung support.
Click to expand...
Click to collapse
Why is it not recognized by your PC. Did you install the drivers properly?

let me introduce u another way :
get to download mode and use oding to flash a new stock rom . if u dont have xda page u can use this to get proper file i used it 5 time with no fail
h t t p : / / androidadvices.com/update-galaxy-nexus-official-ics-404-firmware-odin/2/#.UBdkTSK42U0
flashing new kernel willerase all internal storage that gnexus let u use
---------- Post added at 09:30 AM ---------- Previous post was at 09:27 AM ----------
but this method will wipe your recovery image , after that u should flash recovery image and su

afraaa said:
let me introduce u another way :
get to download mode and use oding to flash a new stock rom . if u dont have xda page u can use this to get proper file i used it 5 time with no fail
h t t p : / / androidadvices.com/update-galaxy-nexus-official-ics-404-firmware-odin/2/#.UBdkTSK42U0
flashing new kernel willerase all internal storage that gnexus let u use
---------- Post added at 09:30 AM ---------- Previous post was at 09:27 AM ----------
but this method will wipe your recovery image , after that u should flash recovery image and su
Click to expand...
Click to collapse
Odin is a leaked Samsung tool. If you're suggesting such tool, search around for Heimdall, see if it supports galaxy nexus, if it does, suggest that.

Excuse for digging out an old thread.
Just wanted to check if there is a way to to format internal memory without loosing root?

blinkjona said:
Excuse for digging out an old thread.
Just wanted to check if there is a way to to format internal memory without loosing root?
Click to expand...
Click to collapse
As long as you don't format /system, you won't lose root.
a maguro wrote this.

Thanks. Is there a tool/app to do that please. Or I can just go about and delete
The reason I want to format is after having flashed 4.3( 3 different build) im no longer able to use instagram with an error 'unfortunately,Instagram has stopped' whereas all other things is working fine. I can't clear data/cache Instagram either.
Sent from my Galaxy Nexus using xda app-developers app

blinkjona said:
Thanks. Is there a tool/app to do that please. Or I can just go about and delete
The reason I want to format is after having flashed 4.3( 3 different build) im no longer able to use instagram with an error 'unfortunately,Instagram has stopped' whereas all other things is working fine. I can't clear data/cache Instagram either.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
In your custom recovery
Sent from my Galaxy Nexus

pls help
i have yueka plus yu5510 ,
i've installed cm13 on it.
when i'm wiping its cache using twrp 3.0.8 , it shuts down.
after reboot i tried again then it shows 'failed to mount cache' , 'failed to mount system' , failed to mount data'.
size of internal storage,cache,system become 0 mb.
What have to do ???? pls. help me . i'm stuck .
i tried every thing under my knowledge like erasing and formatting using fastboot .
i tried to flash stock rom cm12.1 but it says "flash write failure".
also cant change twrp to cwm cause of 'flash write failure'.
pls. pls. can someone help me

Hi efrant, it seems that I have exactly the same issue: My evita was a bit slow so I performed a factory reset from the bootloader... stupid idea as it removed the OS (ROM) from my SD. I tried to push a ROM in the device, it said it was successful but there is still nothing on my SD card.
In the bootloader adb is not detecting my phone, fastboot is working though. Sideload is not working.
When i try to wipe anything from TRWP it says : it says "failed to mount 'sdcard' (invalid argument)"
Charac:
EVITA PVT SHIP S-ON RL
HBOOT2.15.0000
TWRP 2.8.7.5
I can't try your solution because I don't know how to flash system, userdata & cache (I know how to flash boot & recovery). Can you help me on this?

antonin2503 said:
Hi efrant, it seems that I have exactly the same issue: My evita was a bit slow so I performed a factory reset from the bootloader... stupid idea as it removed the OS (ROM) from my SD. I tried to push a ROM in the device, it said it was successful but there is still nothing on my SD card.
In the bootloader adb is not detecting my phone, fastboot is working though. Sideload is not working.
When i try to wipe anything from TRWP it says : it says "failed to mount 'sdcard' (invalid argument)"
Charac:
EVITA PVT SHIP S-ON RL
HBOOT2.15.0000
TWRP 2.8.7.5
I can't try your solution because I don't know how to flash system, userdata & cache (I know how to flash boot & recovery). Can you help me on this?
Click to expand...
Click to collapse
I found the solution : Plug the phone to the PC, open in TWRP recovery / click on mount, then the PC ask to format the device, format in fat32. Then copy the rom to the sdcard. Flash it with TWRP. Done!

My phone is not booting

Hello Guys,
I have a major problem with my HTC one X .. Let me tell u the story from the beginning. I was installing a ROM a specifically this one and I installed the kernel and all fine .. The phone booted and it was working perfectly but there was a problem with the keyboard that whenever it runs it crashed and I couldn't fix it. I said I will restore my old ROM that I saved with the recovery mood while I was installing the new one. I restored it and everything was restored perfectly. Then I got another ROM this one and I installed it ... I copied the zip file to the sdcard and then I restarted my phone in the fastboot mode to install the kernel and install the ROM as usual. I installed the kernel of the ROM using fastboot and then I entered to the recovery mood to install the ROM and complete my installation. BUT when I entered to the sdcard from the recovery mood I found nothing !! as if the sdcard has been formatted ... or as if someone deleted some files .. I couldn't find my ROM.zip though I am sure I copied it .. I couldn't find anything ... I tried to restore my old ROM and fix the issue but when I tried to restore I got no file found the ClockworkMod is not able to find the backup image as I am not able to find my backup image ... Now the phone is not booting and I don't have any access except to the fastboot mood and the ClockworkMod recovery. Is there anyways I can reach the sdcard to copy a ROM and to install the kernel to be able to boot .. .. or how can I boot and fix this issue. Please help me guys . ...

Ow first thing : enter the recovery and mount the sdcard as a mass storage device/usb diskdrive
When you mount the sdcard as a mass storage device in the recovery .... is there a sdcard\O dir ?
If so copy it all from that dir back to the root of the sdcard !

Mr Hofs said:
Ow first thing : enter the recovery and mount the sdcard as a mass storage device/usb diskdrive
When you mount the sdcard as a mass storage device in the recovery .... is there a sdcard\O dir ?
If so copy it all from that dir back to the root of the sdcard !
Click to expand...
Click to collapse
I can mount the sdcard from the recovery but I can't see it in my computer ..I can see it from the recovery only .. but It doesn't have the ROM .. so how can I copy data from my laptop to the sdcard

Then you might have pressed the wrong option in the recovery .... There are 2 sorts of mounting options in there.....what recovery do you have ?

Mr Hofs said:
Then you might have pressed the wrong option in the recovery .... There are 2 sorts of mounting options in there.....what recovery do you have ?
Click to expand...
Click to collapse
Here is my recovery: ClockworkMod Recovery v5.8.2.7

Ah that's the reason, flash this one first and try again
http://db.tt/Krlm4dPs

Mr Hofs said:
Ah that's the reason, flash this one first and try again
http://db.tt/Krlm4dPs
Click to expand...
Click to collapse
Ok I am downloading it .. but don't u know a post of how I perfectly flash it because I don't wanna miss up more with my phone

Do this
Rename my download to recovery.img, put the file in your fastboot folder, put the phone in the bootloader. Open the command window in the fastboot folder on the pc and type
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache

Mr Hofs said:
Do this
Rename my download to recovery.img, put the file in your fastboot folder, put the phone in the bootloader. Open the command window in the fastboot folder on the pc and type
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Click to expand...
Click to collapse
is it flash boot boot.img or flash recovery recovery.img

the_Storm said:
is it flash boot boot.img or flash recovery recovery.img
Click to expand...
Click to collapse
Sorry my bad !!!! :banghead::banghead:
Its been a long day
Fastboot flash recovery recovery.img

Mr Hofs said:
Sorry my bad !!!! :banghead::banghead:
Its been a long day
Fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Thank you Mr Hofs all worked great I had access to the sdcard and I was able to flash a new ROM but now I have some problems ..
I flashed the cyngmod rom and it worked pefectly but when I install gapps the keyboard stopped working and many applications .. would u mind if u suggest me a good jb 4.2.1 ROM + gapps that u tested which stable and working perfectly .

I never tested a single CM10 but did you install gapps directly after installing the rom without reboot ? Otherwise try the CM10.1 seems pretty well in my opinion !

Mr Hofs said:
I never tested a single CM10 but did you install gapps directly after installing the rom without reboot ? Otherwise try the CM10.1 seems pretty well in my opinion !
Click to expand...
Click to collapse
I installed CM 10.1 and I rebooted .. all was working great but I don't have google play or anything .. I rebooted to the recovery mood and then I installed the gapps .... that "they said" it should work perfectly and then I rebooted but they keyboard keep crashing and the googplay ... simply .. I can do nothing :S :S

Wipe, flash ROM, then without rebooting, flash GApps and reboot.

TToivanen said:
Wipe, flash ROM, then without rebooting, flash GApps and reboot.
Click to expand...
Click to collapse
Same exact problem !!
here are the steps exactly
1- erased the cache
2- Installed the kernel
3- erased the cache again
then I went to recvoery mod
1- Install ROM
2- install gapps
3- reboot
when I rebooted keyboard is not running and it keeps crashing !! :S :S

Wiping cache will not do the trick. Use the wipe/factory reset option in recovery before installing rom and gapps.

I did .. I usually before I install the ROM I wipe
1- data/factory-reset
2- cache
3- delvik cache

Also wipe in mounts and storage
Format cache
Format data
Format system
To be sure and then install the rom.zip

HELP - booting problem

(sorry for my english, i'm from Czech)
hello
Yesterday I tried Replaces CM10 but something went wrong and whenever I turn on my mobile it switches on only in ClockworkMod and if I'll click in reboot mobile turn up into ClockworkMod again. Please what should I do?
also it would help if you knew how to reset the boot, I accidentally had set ClockworkMod as a boot.
or if you knew how to get to the storage.
Sorry if it was already there

Whats your hboot number ?
Its stated in the bootloader, its like 1.12 or 1.31, 1.36, 1.39
Lets start with that. And what rom did you want to install ?

Mr Hofs said:
Whats your hboot number ?
Its stated in the bootloader, its like 1.12 or 1.31, 1.36, 1.39
Lets start with that. And what rom did you want to install ?
Click to expand...
Click to collapse
1.39.
i want to install CyanogenMod. but problem is, i don't know how, but i forgot to put the rom to mobile storage. so i write: boot boot.img and when i want to instal it in phone in clockwork I found out that I forgot to put it there.

Download CM10.1 + gapps.zip. enter the recovery and mount the sdcard as usb mass storage device, copy the gapps and the CM10.1 rom to the phone.
Flash the CM10.1 boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then enter the recover and perform a FULL wipe ! Then install CM10.1 rom and gapps ....
http://forum.xda-developers.com/showthread.php?t=1786696
http://forum.xda-developers.com/showthread.php?t=2203331

Mr Hofs said:
Download CM10.1 + gapps.zip. enter the recovery and mount the sdcard as usb mass storage device, copy the gapps and the CM10.1 rom to the phone.
Flash the CM10.1 boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Then enter the recover and perform a FULL wipe ! Then install CM10.1 rom and gapps ....
http://forum.xda-developers.com/showthread.php?t=1786696
http://forum.xda-developers.com/showthread.php?t=2203331
Click to expand...
Click to collapse
i can't mount the SD card because when i click on mount usb storage it write: E: Unable to open ums lunfile (no such file or di...) screen end
what is wrong?

Flash this recovery
http://db.tt/H7m4ffIP
Yours is to old. Flash this one and mount it, then wait 1 minute

Mr Hofs said:
Flash this recovery
*********
Yours is to old. Flash this one and mount it, then wait 1 minute
Click to expand...
Click to collapse
yes that's better, but when i mount sdcard a click on mount usb storage.. phone write usb mass storage but in PC- nothing
Edit:sorry - yes i'm in storage

finish
everything is ok cyanogenmod intalled. thank you soooo much :victory::victory::victory:

Very good !
CASE CLOSED !

HTC One X Bricked.. Help Needed

First of all, I want to tell that I am a beginner and do not know much about rooting and custom ROM installation.
Few days back, I became very keen to know what is custom ROM and is there any custom ROM available for my HTC One X. I searched through internet and found one, downloaded it. Rooted my phone, Unlocked bootloader. After that I installed CWM touch recovery. Everything was going great. Then, I first flashed the kernel given along with that custom ROM. it Flashed. Then, I flashed that Custom ROM. I Showed an error. I flashed it twice or thrice but it stucked on that error. Also in a Hurry, or Excitement, I forgot to take a backup of my previous ROM. After that, I switched on my phone it does nothing and stucked at HTC Bootscreen. I factory reset my phone, it wiped all data from phone. I Thought, a RUU would work, but it also doesn't worked.
I went to HTC Service Center, they are saying that motherboard will be replaced, which is almost of same cost of phone. I cannot spend so much.
I tried so many ways, but nothing worked.
So, I am Finally here seeking help from Experts. Any help will be highly appreciable.
Sorry for my bad English.
Details :
HBoot: 1.73
S-ON
Endevouru

Try this, flash this recovery :
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img
Make a full wipe and install the rom.zip. and flash the boot.img from the rom.zip
What rom were you trying to flash ?

If its a kitkat ROM you can't use cwm recovery to flash that rom.. you either use philz recovery given by mr hofs or latest twrp recovery from the twrp thread or indexed listing thread..

a.broken.star said:
If its a kitkat ROM you can't use cwm recovery to flash that rom.. you either use philz recovery given by mr hofs or latest twrp recovery from the twrp thread or indexed listing thread..
Click to expand...
Click to collapse
You mean this one
https://www.dropbox.com/s/14c1ikgsp38axwv/twrp-recovery2.img

Righto...:thumbup:

i was trying to flash MaximusHD rom.
and Philz recovery i have tried already. The problem is I do not have access to storage. All i have is Bootloader access. and nothing on my phone

Charge the battery, unlock the bootloader, flash the custom recovery and install a new rom

Mr Hofs said:
Charge the battery, unlock the bootloader, flash the custom recovery and install a new rom
Click to expand...
Click to collapse
i have tried this too.. no ROM is being flashed. everytime it ends with some error(s)

What error ??? Be more specific otherwise we cant get 1 step ahead
1: Is your bootloader unlocked ?
2: flashes the custom recovery ?
3: what rom ?
4: did you also flashed the boot.img ?
Please answer specifically !

Mr Hofs said:
What error ??? Be more specific otherwise we cant get 1 step ahead
1: Is your bootloader unlocked ?
2: flashes the custom recovery ?
3: what rom ?
4: did you also flashed the boot.img ?
Please answer specifically !
Click to expand...
Click to collapse
1. Bootloader was unlocked, i have relocked it. I'll unlock it. no Issues.
2. I have tried CWM philz touch custom recovery. I'll install it again
3. It do not have any ROM at present. Earlier it had 4.2.2 JB Stock ROM
4. Yes, I flashed boot.img. Nothing worked

1. Unlock the bootloader again
2. Flash the Philz-Recovery
3. Boot the Recovery
4. Install the Rom via ADB-Sideload
5. Reboot to bootloader
6. Flash the Kernel (boot.img)
7. Reboot into system
If you get an error, then post the Code here , so we can find out what's wrong with your phone.
Sent from my HTC One using XDA mobile app

HD2Bastler said:
1. Unlock the bootloader again
2. Flash the Philz-Recovery
3. Boot the Recovery
4. Install the Rom via ADB-Sideload
5. Reboot to bootloader
6. Flash the Kernel (boot.img)
7. Reboot into system
If you get an error, then post the Code here , so we can find out what's wrong with your phone.
Sent from my HTC One using XDA mobile app
Click to expand...
Click to collapse
sorry for this stupid question. But how to use ADB Sideload..??

Just mount the sdcard in the mounts and storage menu ! No need for adb sideload
And don't just install the rom, you must perform a full wipe before that !
Factory reset
Wipe cache partition
Wipe dalvik cache
Format system
Format data
Format cache
Then install the rom !

Mr Hofs said:
Just mount the sdcard in the mounts and storage menu ! No need for adb sideload
And don't just install the rom, you must perform a full wipe before that !
Factory reset
Wipe cache partition
Wipe dalvik cache
Format system
Format data
Format cache
Then install the rom !
Click to expand...
Click to collapse
ok i will try this and will be back with whatevr result comes out....

I bricked mine too , this is what I did
mohitsinghl said:
ok i will try this and will be back with whatevr result comes out....
Click to expand...
Click to collapse
If that doesn't work try this , this is what I did when I bricked my HTC One X:
1. Download Fastboot
2. Download adb
3. Download cm-10.2.1-endeavoru.zip (https://download.cyanogenmod.org/?device=endeavoru)
(I used this one , it's justs so you get your SD Card Working again and you can
put ROMS and everything on it again)
4. Download openrecovery-twrp-2.4.0.0-endeavoru-JB (http://techerrata.com/browse/twrp2/endeavoru)
(This one will be used because it has touch ability's and you can install ROMS with it )
4.1 Or you can download recovery-clockwork-touch-6.0.4.7-endeavoru.img (a.k.a Philz recovery)
(This one will be used because it has touch ability's and you can install ROMS with it )
( I used Philz recovery 5.15.9.img (provided by Mr Hofs -> who is a great guy btw)
5. Download openrecovery-twrp-endeavoru-2.1.7 (http://techerrata.com/browse/twrp2/endeavoru
(This one will be used for adb push commands, openrecovery-twrp-endeavoru-2.1.7 has a built
in ability for your sd-Card , adb can recoginze it but the problem is your touch will not work.)
6. Go into bootloader -> fastboot and do this:
6.1 fastboot flash recovery openrecovery-twrp-endeavoru-2.1.7.img
7. Go into recovery (Hboot -> recovery)
7.1 just open the recovery, your touch will probably not work. DONT LOCK IT JUST LEAVE IT OPEN
(ADB sideload didn't work for me so that's why we are going to do this)
IF YOUR TOUCH WORKS YOU CAN SKIP STEP 8
7.2 do this command: adb devices
If you don't find your devices in this then the next steps will not work.
YOU HAVE TO SEE YOUR DEVICE
7.3 do this command: adb push cm-10.2.1-endeavoru.zip /sdcard/
You can only do cm-10.2.1-endeavoru.zip if the zip file is located in the same folder your using
with command. I'm not sure about /sdcard/ . I cant remember anymore But this will put the
but this will put the zip Directly on your SDcard.
8. Go to bootloader -> fastboot
8.1 do this command: fastboot flash recovery openrecovery-twrp-2.4.0.0-endeavoru-JB.img
8.2 or do this command: fastboot flash recovery Philz recovery 5.15.9.img
Your touch wasn't working but it will work now.
9. Go to booloader -> fastboot
9.1 extract the boot.img from the Download cm-10.2.1-endeavoru.zip into the fastboot folder
9.2 do this command fastboot flash boot boot.img
9.3 fastboot erase cache
10. Go back to recovery
10.1 Wipe User Data
10.2 Wipe data cache
10.3 Go to advanced -> wipe Dalvik Cache
11. Install zip from sdcard
11.1 Choose cm-10.2.1-endeavoru.img
11.2 Install the zip WITH full wipe
12. After the install, reboot. You should have a full functional HTC ONE X now
13. Now but your ROM's(ZIP FILES)/Recovery(ZIP FILES)/Kernels and everything you want on your HTC because
You can see your HTC on your PC again!

I tried adb push.. But i cant find the pushed zip on sd card in recovery.. Moreover i tried flashing using fastboot command i.e. fastboot flash zip rom.zip it ended with an error <remote not allowed>
Sent from my Titanium S5 using XDA Free mobile app

For maximus hd do this :
Flash Philz 5.15 and mount the sdcard and wait literally minutes to let the sdcard pop up, copy the rom, do a full wipe and install it then also flash the boot.img from the maximus rom in the bootloader and reboot the phone
Don't make this so hard on yourself !

Philz 5.15 recovery is not flashed. And ended with an error 0xa . any other way??
Sent from my Titanium S5 using XDA Free mobile app

Uhm really.....second time : post the error/your taken steps ! I'm not playing a game of sharades here ......
If it's not flashed you are doing something wrong

Please don't get angry on me.. M a beginner.
Okey now i have managed to flash philz recovery version 6 i.e. philz touch 6 but still cant get storage popup on my pc. I waited 30 mins after clicking mount /storage/sdcard0
Sent from my Titanium S5 using XDA Free mobile app