Develop Bugs

pls pls help my bricked ascend p6 pls pls

I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device

sasadeaunty said:
I tried to flash my p6 to B512 ROM, and I had changed my recovery, duno what is my recovery version now, but just cant install any new ROM.
Actually this is the first time i hit this problem and I hv really no idea how to proceed, i flashed successfully many times previously using twrp cwm or stock recovery, just dont know what happen this time, I know how to flash a new ROM from recovery anyway, just put dload folder with UPDATE.app inside in FAT32 sdcard, but it just not success during flashing, any expert can guide me, i really appreciate your help, I attached with a photo below, i stuck at here when reboot with USB plug in, and for your information my adb cant read my device
Click to expand...
Click to collapse
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help

hi
taaeem said:
So first unplug your phone from your pc otherwise it won't work.
Than I had the same as you in the picture with the recovery 'stuck' but for it simply worked if I reboot straight again into recovery via the three buttons.
Hope I could help
Click to expand...
Click to collapse
Hi, if i reboot without plug-in the usb, it will also fail like (attached photo124)

hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery

blueIBI said:
hm..tried to use a jb rom (b125/132)..maybe you flashed a jb recovery
Click to expand...
Click to collapse
Different stock recovery only can install certain ROM? I tried B125 already cannot. Any other recommend ROM for me to try? I rmb I flashed a quite latest stock recovery

then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..

blueIBI said:
then try the b510 or the b634..
jb recovery can only install jb rom..so do kk recovery only install kk rom as i know..
if nothing brings success try the unicom rom..
Click to expand...
Click to collapse
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.

sasadeaunty said:
hi, my stock recovery is 4.4.2, and I just downloaded B634 ROM and tried to flash it, but the flashing fail......
stuck at this
ro.build.version.release = 4.4.2
ro.product.name = UEDGE
Current build version is not 4.2, dont need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
Click to expand...
Click to collapse
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4

maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..

miz_pimp said:
You still have your usb cable plugged in. It will NOT work like that. @taaeem has already mentioned that.
What was the previous firmware that you had installed?
hi miz_pimp, if i do not plug in the usb cable, it will directly go into fail as showed in the picture124 i attached below, I do not rmb what firmware i installed previously, but I did a full wipe, I do not think thr is still firmware inside beside stock recovery.
Click to expand...
Click to collapse

blueIBI said:
maybe the sdcard causes this error too..had this with a 16gb fuji card..with a 8gb noname it worked..
and unplug your phone before flashing..as mentioned..
Click to expand...
Click to collapse
I tried with different sdcard without usb plugged in, still giving me fail

very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..

blueIBI said:
very strange..
maybe you do a all again..
starting with flashing a stock boot.img and recovery.img (from the b512 rom..you can extract them by the update extractor from here..just search)..
then try to flash the b512 rom by the force update method (press and hold the buttons until you see the update process starting!)..
id this fails too..well..i don't know how to help then..
if there was a cn firmware on your device (as mentioned) then search for the unicom firmware and read how to flash this and do a eventually downgrade at first)..
Click to expand...
Click to collapse
i cant even flash my recovery, when i use adb, it just shows me waiting for device, then no response. I tried most of the ways but no one can help......

hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..

blueIBI said:
hm..what might help is that you install the device drivers again..i had in the beginning a similar problem..after reinstall of the device driver (there is a package by lesscro on this forum) my device was seen even in bootloader mode correct..
Click to expand...
Click to collapse
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess

miz_pimp said:
If it was a Chinese firmware, you need to try flashing this file first: https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Click to expand...
Click to collapse
sasadeaunty said:
i reinstall the driver setup from lesscro, is still the same, nth works for me, I cannot change recovery cannot flash new ROM, everything just a mess
Click to expand...
Click to collapse
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.

miz_pimp said:
Have you tried the file that I linked to above?
I think your problem is that you flashed the incorrect recovery version for the firmware you had on your device.
Unless you used TWRP to completely wipe your device before you flashed your stock recovery (which was not at all necessary), then you should still have a firmware on your device.
Click to expand...
Click to collapse
hi miz_pimp, thank you so muchhhhhhhhhhhhh, I am able to recover my p6 with the firmware u linked to me. Really thank you and thanks for others too for helping me too. Thanks all.

Glad you got it sorted, and you're very welcome. [emoji2]

How to downgrade from WW4.21.40.223 to WW_2.12.40.11?

Hi,
I have the flickering screen problem with my phone and it is out of warranty so i can't send it back to repair.
I tried upgrading to the latest firmware, tried factory reset, wipe cache, installing google launcher, enabling the HW thing in developer mode and nothing worked.
I read that WW_2.12.40.11 version doesn't have the screen problem and i want to try it, but i wanna be sure i'm doing it the right way.
1) I read that i can't just put the wanted firmware in my phone and install the update but i must also flash the matching recovery to flash the wanted version - is it true?
2) Can i downgrade straight from my version to the lower one because i think the other way around, i need to have higher version for upgrading to the higher version i now have.
3) Where can i find the adb driver for this?
Thanks

You can downgrade via ext sd card using the downgrade version from asus > 52.20.40.196 LP which when installed , reboots to 2.20.40.196LP
When putting WW-UL- 52.20.40.196.zip.zip ,make sure to put an extra .zip on the end in file manager or in sd from pc first and reboot.
If you then put WW-UL-2.12.40.11-user.zip.zip (extra .zip) on sd or in file manager . You might get that to give you notification after a reboot too. Although i have not tested to downgrade that far .
You must use the first 52.20 blah blah fw to initially downgrade first though. Ignore this and you are liable to brick. Here >
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-52.20.40.196-user.zip
See my downgrade via ext sd video and thread , familiarise yourself with the process first !
https://forum.xda-developers.com/zenfone2/help/success-downgrade-mm-to-lp-via-sd-card-t3520642
Any questions , just ask

timbernot said:
You can downgrade via ext sd card using the downgrade version from asus > 52.20.40.196 LP which when installed , reboots to 2.20.40.196LP
When putting WW-UL- 52.20.40.196.zip.zip ,make sure to put an extra .zip on the end in file manager or in sd from pc first and reboot.
If you then put WW-UL-2.12.40.11-user.zip.zip (extra .zip) on sd or in file manager . You might get that to give you notification after a reboot too. Although i have not tested to downgrade that far .
You must use the first 52.20 blah blah fw to initially downgrade first though. Ignore this and you are liable to brick. Here >
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-52.20.40.196-user.zip
See my downgrade via ext sd video and thread , familiarise yourself with the process first !
https://forum.xda-developers.com/zenfone2/help/success-downgrade-mm-to-lp-via-sd-card-t3520642
Any questions , just ask
Click to expand...
Click to collapse
Thanks alot
Just a question before i try your method: I already installed 2.12.40.11 recovery.img into the phone. can i still use your method or should i first flash 4.21.40.223 recovery.img back to the phone?

gifnooky said:
Thanks alot
Just a question before i try your method: I already installed 2.12.40.11 recovery.img into the phone. can i still use your method or should i first flash 4.21.40.223 recovery.img back to the phone?
Click to expand...
Click to collapse
OK, it's weird, i did flash the 2.12.40.11 recovery.img to the phone using adb and it was said in the console that the process completed, but now when i enter recovery mode it still shows me 4.21.40.223 version.

OK, I did downgrade with your method and it works great, but when i try to downgrade fro that version to the version i want to try i get error that i cant install the package over the existing newer version.
Just to inform.

gifnooky said:
OK, I did downgrade with your method and it works great, but when i try to downgrade fro that version to the version i want to try i get error that i cant install the package over the existing newer version.
Just to inform.
Click to expand...
Click to collapse
If you want to downgrade to such an old version, find the .raw file of that version (search here on XDA) and flash it via Asus Flash Tool.

JBolho said:
If you want to downgrade to such an old version, find the .raw file of that version (search here on XDA) and flash it via Asus Flash Tool.
Click to expand...
Click to collapse
Thanks for the advice.
I searched and found raw firmware versions but no the one i'm looking for.
Is there any way i can install the official firmware i have? i also found recovery.img, boot.img, droidboot.img of the version i want.

gifnooky said:
Thanks for the advice.
I searched and found raw firmware versions but no the one i'm looking for.
Is there any way i can install the official firmware i have? i also found recovery.img, boot.img, droidboot.img of the version i want.
Click to expand...
Click to collapse
If you have all the img partitions you can always try installing via fastboot commands but i really recommend using a raw with Asus Flash Tool...

Hai friend try flash 3 file of boot.img recovery.img and droidboot.img version 40.11.. and then flash rom with adb sideload.. its work for me... and solve my prob flicker display..
Sent from my ASUS_Z00AD using Tapatalk

savve said:
Hai friend try flash 3 file of boot.img recovery.img and droidboot.img version 40.11.. and then flash rom with adb sideload.. its work for me... and solve my prob flicker display..
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
Hi, thanks i'l try that.
does it matter in what order i flash this 3 files?
Edit: If i already flashed the ROM can i just flash the boot.img and droidboot.img or do i need to do the whole process including flashing the ROM again?

Is your screen flickering problem like this: https://www.youtube.com/watch?v=kRuxTefNcKw
If its like that I was told its a LCD hardware problem which gets fixed by replacing LCD.

Update:
Well, I installed firmware 2.12.40.11 and it worked fine for several days but then the screen started to flicker again.
i started to update the devices with OTA updates and then i saw that in firmware WW_2.20.40.174 the screen didn't flicker.
i had further updates and then the screen started to flicker again.
i tried to flash recovery.img, boot.img and droidboot.img but not the device only enters fastboot mode but when i try to enter normal boot or recovery mode, it only comes back to fast boot mode.
any suggestion what should i do to unbrick the phone?
Thanks

Roll Back to MarshMallow [BLN-L22]

Hi,
Below are the steps to rollback to Marshmallow from Nougat. I've only tested it on BLN-L22 so I don't know if it works with other variants.
Your bootloader would be locked. However, you can unlock again using the old unlock code.
You can find firmware of your version @ Honor Official Site
Download the Marshmallow firmware from here Honor India Official Support
Unzip it and place the dload folder in the sdcard (internal storage wont work)
Power off the device.
Press Volume Down + Volume Up + Power key to log into Huawei software upgrade
Let it finish. Now installation is done. But now when you will boot, it will bootloop and go to Huawei ercovery. Simply select the shutdown option
Once the device is off, press Volume Up + Power. This will take you to Huawei Recovery
Wipe data and Wipe Cache
Restart. You are back to MarshMallow
Kindly do the above at your own risk. It worked for me, but it may brick for you.
Edit : User @honor6xak was able to rollback after wiping the system using TWRP and following above steps. If there is no system, there would be no firmware for Honor to overwrite. It would be as good as flashing fresh.
Method 2.
1. Make a nandroid backup (complete backup) and save it somewhere safe. Just in case things get messy.
2. Download the official firmware (Marshmallow) from the Honor official site.
3. Extract the dload folder from the firmware and put it into an sdcard (physical one).
4. Reboot to TWRP and wipe data + system. Twrp will warn you about wiping system. Once you do it. Power off the device.
5. Press volume up + volume down + power this will take you to Huawei recovery and will auto install the firmware if the folder is there in sdcard.
This is a tad bit risky but if you have nandroid backup then you can be on a safe side. But still do it only if you are sure. I don't have money to pay if you Sue me

The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.

Ziffnil said:
The above link is for the Indian firmware for the US firmware (L24) you'll have to go to the us website. I got a little confused earlier trying to download it, just thought I'd give a heads up to anybody else. I'd link it but I had to create a new account as my old one is apparrently tied to an email I don't remember.
Click to expand...
Click to collapse
Yes, that's the reason I specified the BLN number. You don't need to login to have the firmware download. If you can give the link we can update the post.
Edit : I've updated site for Official firmware of various regions in the main post

It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem

eddy7990 said:
It's official mm r ( this is root mobiles or unrooting mobiles ) any virus problem
Click to expand...
Click to collapse
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus

So hacky but... you can find the 'rollback package' here http ://www, hihonor, ]com/us/support/details/index,html?[DOC_ID=94205] and the firmware here http ://www, hihonor, [com/us/support/details/index.html?][DOC_ID=94205]
Just remove the spaces, brackets and replace periods with commas.

suhel28 said:
If you flash these official version you'll get unrooted and your bootloader would be locked again. But you can unlock the bootloader again and root also.
Since it is from official website I doubt it will have any virus
Click to expand...
Click to collapse
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you

Angircy said:
Hello bro,
I several times tried the method that you mentioned in your thread using a memory card but it always failed. I'm very curious how it worked for you. Right now I unlocked and rooted my Honor 6x BLN-L22.
I just want to know if your phone was unlocked when you tried this method.
If yes I'll give it a try. It might work this time.
Thank you
Click to expand...
Click to collapse
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.

suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse
Bro it didn't work for me.

Angircy said:
Bro it didn't work for me.
Click to expand...
Click to collapse
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.

suhel28 said:
You can do one thing I don't know if it work but you can try it. Download firmware finder from play store. Search for the latest nougat firmware then select download. There would be two files 1. Update.zip 2. BLNxxxx some name. Download the second file. Then flash it with twrp.
Now do the procedure as I described in the first post. When I did the roll back I was on the unofficial nougat version.
I'll search for some other method. Sorry it didn't work for you.
Click to expand...
Click to collapse
Thanks a lot bro. I'll try that.

It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.

Ziffnil said:
It worked for me on my BLN-L24, rolling it back to I could exchange it. However I had to do a couple other steps first to get it to work, so here's my full steps that worked for me:
1. If you have twrp or another custom recovery, flash it back to stock.
1a. To find the stock recovery I had to get it from the zip file here since I'm a dumbass and didn't make a backup: If you have twrp or another custom recovery, flash it back to stock.
2. If you have a custom bootloader, flash it back to stock.
3. Download and extract the stock rom. Flashing it from zip will not work.
4. Copy the UPDATE.app to /sdcard/dload/ (not a physical sdcard, if that's what's confusing you.
5. Turn the device all the way off.
6. Press and hold volume up, and volume down, then press and hold power until the phone starts booting, immediately release it once you see something on the screen.
It should now 'update' your phone back to EMUI 4.1.
Click to expand...
Click to collapse
I'd put the dload folder in the sdcard folder but it didn't work. I'd to use a physical sdcard

so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
suhel28 said:
Yes, my phone was rooted as well as unlocked when I tried it. I hope it works for you.
Click to expand...
Click to collapse

honor6xak said:
so can i flash the firware zip file using twrp please help me out am on twrp screen oly coudnt start my ddevice am running nougat emui 5 bln22
Click to expand...
Click to collapse
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP

i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not opening and restarting device didnt help .... hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Click to expand...
Click to collapse

honor6xak said:
i was on emui 5 nougat tried to install arise it did installed fine and later the camera was not restarting hence i went ahead and tried to flash the nougat again with twrp as i didnt know it ll be messed up like this
Click to expand...
Click to collapse
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP

suhel28 said:
What did you do that you are stuck at TWRP?
Tell the history then we can suggest something
Download the update_data_full_BLN-L22_channel_in.zip and place it on sdcard.
You can then flash it with TWRP
Click to expand...
Click to collapse
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
the file u mentioned above is it nougat ???
my twrp says there is no os on the device when i head to reboot so my question >>is it posible to install nougat and reboot them or shoould i go back to the marsh...
pls help me out bro

honor6xak said:
another confusion now i went to the honor official site and downloaded emui4 update its 1.7gb whears the file u mentioned above is just 733 mb so which one do i flash ??? bro
Click to expand...
Click to collapse
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works

suhel28 said:
You cannot directly flash the 4.1 file on your nougat. If you want to do that then you have to use the procedure I gave in the first page.
The link I gave is for nougat version. Basically, when I had a similar problem like you I flashed the 733mb file and my phone was able to boot.
Wipe data in TWRP
Flash the 733mb file
Wipe cache
I hope it works
Click to expand...
Click to collapse
Both methods didn't work for me though I flashed the 733mb file using TWRP successfully.

Problems with Safety Net

After the last OTA update, my Moto G5 started to boot with the following warning:
"
Your device has failed verification and may not work properly.
To learn more visit:
motorolacom/unlockbootloader
ID: N/A
Your device will boot in 5 seconds
"
It also started to restart randomly.
I did some research on the web and found out that this warning appears when someone unlocks/roots the device.
The problem is that I aver never unlocked the bootloader or rooted the device.
When I boot to fastboot it says "OEM Locked" and the app DevCheck says that I am not rooted.
It seems to me that the update corrupted something and now some piece of software flags my device as unlocked.
Besides the irritating screen, some apps are not working properly or cannot be downloaded from the store.
I tried to reset to factory settings and wipe caches. Problem still happens.
I'd like to know if you guys know a solution for this problem.
I saw on another post that this problem was happening on some Verizon Moto Zs and they provided a software to reinstall the rom
Unfortunately, Motorola has not released a software to do the same to unlocked devices.
My ROM version is: NPPS25.137-33-6 (yeah, there is an "S" that I don't find in the roms available here)
The baseband is: M8937_8000.122.02.45R
(CEDRIC_BRAZILDSDS_CUST)
I was thinking in loading the rom into internal memory, reboot in recovery mode and flash the rom using the option "Install package from zip".
Do you know if it would work without an unlocked bootloader. Is it safe?
Thank you for the help,

Don't know if you can flash the boot logo without an unlocked bootloader but if you can here it is
Put phone in fastboot mode
Download logo from link below
Enter the following in a windows command prompt where you have fastboot files (Google to learn howto install Android sdk) & the logo file
Code:
fastboot.exe flash logo logo-g5-fix.bin
http://drive.google.com/file/d/0B-idWfPYugGvREJaR3B0UFIxUkU/view?usp=sharing
If you can't then you have no option but to wait for Motorola to fix it if you really haven't modded your phone

TheFixItMan, I really appreciate your answer.
But in that case wouldn't I just be changing the warning screen?
The problems with Netflix and other apps would remain.
I need something to fix the cause of the problem.
Have you guys heard about that problem before?
This guy had the same problem, but verizon patched it:
https://community.verizonwireless.com/thread/921991

hoferbr said:
TheFixItMan, I really appreciate your answer.
But in that case wouldn't I just be changing the warning screen?
The problems with Netflix and other apps would remain.
I need something to fix the cause of the problem.
Have you guys heard about that problem before?
This guy had the same problem, but verizon patched it:
/QUOTE]
I have the same problem as you. Could you fix it?
Thank you,
Luciano
Click to expand...
Click to collapse

You can go back to stock using ADB update or by flashing VERIFIED images in bootloader mode. This will work even when bootloader is locked.

p8tgames said:
You can go back to stock using ADB update or by flashing VERIFIED images in bootloader mode. This will work even when bootloader is locked.
Click to expand...
Click to collapse
To flash using bootloader I need just to copy the .zip in the internal memory, reboot in reboot in bootloader mode and select the option "install from .zip file"?
Where do I find the verified image for my device?
If I flash an unverified image will my device brick ou the bootloader will present a "impossible to procede" screen?
Thank you for the help!

hoferbr said:
To flash using bootloader I need just to copy the .zip in the internal memory, reboot in reboot in bootloader mode and select the option "install from .zip file"?
Where do I find the verified image for my device?
If I flash an unverified image will my device brick ou the bootloader will present a "impossible to procede" screen?
Thank you for the help!
Click to expand...
Click to collapse
you can flash what ever you want in fastboot -
However - In terms of firmware, if you are trying to flash incorrect firmware then the verification check will fail and it will not flash
Just don't flash a new bootloader if you are worried about it - its not needed unless you are upgrading an android version and that version has an updated bootloader

So I am safe if I follow these steps:
Manually Update Android Nougat for Moto G5 (NPP25.137-33) via Recovery
First of all, Go to Settings –> About Phone –> Tap on Build Number 7 Times.
Go to Developer Options –> Enable USB Debugging.
Save Stock Android Nougat rom for Moto G5 and save it in Internal storage.
Reboot Moto G5 Plus to Recovery Mode.
Select Apply Update from SD Card.
Select the Downloaded ZIP file from SD Card.
Wait until Installation process Completes.
Once the Installation completed. Reboot the Phone.
If my ROM is a wrong version, will the bootloader detect and deny instalation?

hoferbr said:
So I am safe if I follow these steps:
Manually Update Android Nougat for Moto G5 (NPP25.137-33) via Recovery
First of all, Go to Settings –> About Phone –> Tap on Build Number 7 Times.
Go to Developer Options –> Enable USB Debugging.
Save Stock Android Nougat rom for Moto G5 and save it in Internal storage.
Reboot Moto G5 Plus to Recovery Mode.
Select Apply Update from SD Card.
Select the Downloaded ZIP file from SD Card.
Wait until Installation process Completes.
Once the Installation completed. Reboot the Phone.
If my ROM is a wrong version, will the bootloader detect and deny instalation?
Click to expand...
Click to collapse
if you are talking about an official ota update then it will fail - you cannot update like this
An offical ota zip requires a non rooted device, unmodified system partition and stock recovery
you maybe able to download the ota update and save it (its in the cache partition)
then use flashfire app to install it
note if its a custom rom than recovery mode will allow you to flash any zip and will flash anything unless the updater script specifies a certain build.prop target eg phone model or other criteria that would stop it flashing if it was false
If you want to flash firmware you need the firmware image and flash it via fastboot

TheFixItMan said:
if you are talking about an official ota update then it will fail - you cannot update like this
An offical ota zip requires a non rooted device, unmodified system partition and stock recovery
you maybe able to download the ota update and save it (its in the cache partition)
then use flashfire app to install it
note if its a custom rom than recovery mode will allow you to flash any zip and will flash anything unless the updater script specifies a certain build.prop target eg phone model or other criteria that would stop it flashing if it was false
If you want to flash firmware you need the firmware image and flash it via fastboot
Click to expand...
Click to collapse
I have the same problem, but I unlock the booloader after with the intention to relock when flashing a stock rom.
But every stock rom I have downloaded when flashing with mfastboot shows a version security downgrade error and cannot reflash stock rom.
My bootloader is B8.23.
Any help appreciatte.

jdonadel said:
I have the same problem, but I unlock the booloader after with the intention to relock when flashing a stock rom.
But every stock rom I have downloaded when flashing with mfastboot shows a version security downgrade error and cannot reflash stock rom.
My bootloader is B8.23.
Any help appreciatte.
Click to expand...
Click to collapse
You need firmware that matches or exceeds your current firmware version - you cannot flash a lower firmware version

TheFixItMan said:
You need firmware that matches or exceeds your current firmware version - you cannot flash a lower firmware version
Click to expand...
Click to collapse
Yeah, I see that, but looking into the stock rom .zip file I cannot find the correct ID that matches to my. But since I posted the reply, I´ve downloaded from a mirror in lolinet, and correct flash my phone.

Stable Pie ROM for Honor 6x

DISCLAIMER
This ROM is not my work. It belongs to Askucio Droid (Sorry if I got the spelling wrong) & Team Pixys OS. I am just posting on this section for our devices with detailed instruction.
WARNING
Your warranty is now void. I am not responsible if you brick your device. Please make sure you know what you're doing and don't proceed if you don't meet the requirements. However I will try to help all I can.
REQUIREMENTS
*Unlocked Bootloader
*You must be on Stock EMUI 8
*Honor 6x
*TWRP recovery
*Non-Rooted Device
*Patience
DOWNLOAD
OpenGapps: https://opengapps.org
(Download the nano package for arm64 & Android 9)
ROM: https://sourceforge.net/projects/pixys-os/files/pie/hi6250/
(Download latest zip.)
INSTALLATION
*Boot your device into TWRP recovery.
*Wipe->Format Data->YES->Advanced Wipe.
*Mark Dalvik/ART Cache, Cache, Data, Internal & System.
*Perform the wipes. Only wipe these mentioned and nothing else.
*Now go to install and select Pixys OS zip. Delay: 2-4 min.
*Wipe Cache and then install Gapps. Delay around 3-4 min. Again wipe Cache.
*Now goto Reboot-> Power Off/Shutdown.
*Now plug your USB cable into computer and other end into phone while holding Volume Down and boot into Bootloader.
*Flash Stock Recovery for your device.
*Power off by holding power button. Once phone restarts hold Volume Up to enter into erecovery and Wipe Data/Factory Reset.
*Wipe Cache and Reboot.
*Initial Configuration and Start.
Rooting
Boot your device into Bootloader and flash TWRP from Elemental ROM thread (Be sure to thank KingOfMezi). After that flash latest Magisk for root goodies.
If you face any problem feel free to ask. ROM is not mine. I simply make the guide to flash on Honor 6x. All credit goes to Askucio Droid and Pixys OS Team.

Great post!
I still have to rebrand and update to emui8.
Looks like a huge job.

I'm using this rom since 3 weeks ago and is so smooth and daily driver.
PD: Would be nice if you reference the original post of @Askuccio_DROID on P8 Lite forum:
[ROM] [PIE 9.0.0_r10] [OFFICIAL] PixysOS for Huawei Hi6250
Thanks for sharing here

After installing the ROM, you can easily get into bootloader by selecting bootloader during the reboot option in twrp. It's a bit easier than trying to get the buttons & timing right to get into bootloader to flash the stock recovery.

Hi sir thank you for this guide always wanted to flash this pixy os but no detailed instructions for pur device..
Im just a newbie here..
Can you help me find the link for the recovery for my device.
im on BLL-L22?
anyone pls help me

BLL-L22 ? You mean stock recovery? Are you on stock EMUI 8? India? If you have update.app u can easily extract it. But if you can't then I will do it for you once the download finishes.

galapagos said:
After installing the ROM, you can easily get into bootloader by selecting bootloader during the reboot option in twrp. It's a bit easier than trying to get the buttons & timing right to get into bootloader to flash the stock recovery.
Click to expand...
Click to collapse
I always find buttons easy. But yeah you can do that as well. I guess whatever suits you.

Alex19Gam said:
I'm using this rom since 3 weeks ago and is so smooth and daily driver.
PD: Would be nice if you reference the original post of @Askuccio_DROID on P8 Lite forum:
[ROM] [PIE 9.0.0_r10] [OFFICIAL] PixysOS for Huawei Hi6250
Thanks for sharing here
Click to expand...
Click to collapse
No idea how to do that but thanks for doing that. I can't even spell the name right LOL :silly:

Mannan Qamar said:
BLL-L22 ? You mean stock recovery? Are you on stock EMUI 8? India? If you have update.app u can easily extract it. But if you can't then I will do it for you once the download finishes.
Click to expand...
Click to collapse
Oh man....I think I need to rebrand first for this then get the emui 8 im still running on emui 5...im from the Philippines..
so the stock recovery should be on the updater.app the ill just extract that file then I need to look for "recovery.img"?
is that how its done?

Well first you need to update to EMUI 8. You will probably have to download Indian or China version of EMUI 8 from Firmware Finder. I suggest China. Once downloaded just rebrand/update. Now in the update.zip you will find an update.app it is around 2-3 GB. Download Huawei Firmware Extractor and then extract Recovery_ramdis.img That's it. Now flash it normally.
Reading your post I conclude you are on EMUI 5 correct? What is your model number? It might help with the rebranding.

Is the moble metwork standby battery drain bug in this rom?

Mannan Qamar said:
Well first you need to update to EMUI 8. You will probably have to download Indian or China version of EMUI 8 from Firmware Finder. I suggest China. Once downloaded just rebrand/update. Now in the update.zip you will find an update.app it is around 2-3 GB. Download Huawei Firmware Extractor and then extract Recovery_ramdis.img That's it. Now flash it normally.
Reading your post I conclude you are on EMUI 5 correct? What is your model number? It might help with the rebranding.
Click to expand...
Click to collapse
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning

Can I upgrade from EMUI 5.x ???

ubaidpks said:
Can I upgrade from EMUI 5.x ???
Click to expand...
Click to collapse
No. You will brick your phone. First upgrade to EMUI 8

jhorne917 said:
Is the moble metwork standby battery drain bug in this rom?
Click to expand...
Click to collapse
No. Battery Life is awesome. No drain on standby.

jlan007 said:
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning
Click to expand...
Click to collapse
Sure. Just follow this guide and you will be up and running in no time.
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Also recovery is flashed through fastboot using either powershell or command prompt through your PC
Go-to the above link and download HWOTA and the three update files. Extract HWOTA to the C Drive of your PC. Rename them as suggested in thread. Now transfer the files to Download folder inside HWOTA 7 folder. Now boot your phone into Bootloader and connect to the PC. Now run update.bat it will flash TWRP recovery. Once it says waiting for device to boot into TWRP, disconnect the device and hold Power & Volume Up to boot into TWRP. Once in there reconnect to Computer and press enter twice.
Now select:
Update from-> using script-> change location-> BLN-AL20. It will flash OEM-Info and then ask for your bootloader unlock code and continue. Now wait patiently for it to finish. Once flashing is complete select to keep Bootloader unlocked.
Upon first boot you won't have network signal. Solution is in the linked thread but Don't ignore it and fix signal first then after that flash Pixys OS by following OP.
Now to extract Stock Recovery follow these:
Extract the main update.zip
Download Huawei Update Extractor from XDA. Search for it.
Launch Huawei Update Extractor and go to Settings and disable first option. Now press three dots to browse and navigate to extracted folder and select Update.app
Double click on Recovery_Ramdis.img and extract it to desktop. You will get animage file and another one. Delete the other one. Now flash image file as you would flash TWRP. If you need more help, Just ask.

One question, can I transition from Resurrection Remix Oreo? Or do I have to flash EMUI 8 again?

Hello,
I am using an Honor 6X model number BLN-L21 running Emui 5.0.1.
Phone has unlocked bootloader and is rooted.
Since is unlocked OTA updates are no longer working so I am stuck on 5.0.1.
If I understood correctly I have first to upgrade to Emui 8.0 stock fw and then pass to this custom rom.
Could you please write me a small recap/tutorial I can follow to jump my phone in Emui 8?
Thanks,
Andrea.

jasonalejandro507 said:
One question, can I transition from Resurrection Remix Oreo? Or do I have to flash EMUI 8 again?
Click to expand...
Click to collapse
Yes you can but to be on the safe side I would advise to restore EMUI 8 first. Though you can go directly if you wish.

Sephiroth79 said:
Hello,
I am using an Honor 6X model number BLN-L21 running Emui 5.0.1.
Phone has unlocked bootloader and is rooted.
Since is unlocked OTA updates are no longer working so I am stuck on 5.0.1.
If I understood correctly I have first to upgrade to Emui 8.0 stock fw and then pass to this custom rom.
Could you please write me a small recap/tutorial I can follow to jump my phone in Emui 8?
Thanks,
Andrea.
Click to expand...
Click to collapse
jlan007 said:
Sure her's my model I really need all the help I can so here
it is
model: BLL-L22C636B389
emui 5.0.1 (stock)
android : 7.0
I also about the normal way of flashing it you said about..the recovery. Is it via Odin, multi tool, or twrp?
sorry still have this question , still learning
Click to expand...
Click to collapse
Sure. Just follow this guide and you will be up and running in no time.
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Also recovery is flashed through fastboot using either powershell or command prompt through your PC
Go-to the above link and download HWOTA and the three update files. Extract HWOTA to the C Drive of your PC. Rename them as suggested in thread. Now transfer the files to Download folder inside HWOTA 7 folder. Now boot your phone into Bootloader and connect to the PC. Now run update.bat it will flash TWRP recovery. Once it says waiting for device to boot into TWRP, disconnect the device and hold Power & Volume Up to boot into TWRP. Once in there reconnect to Computer and press enter twice.
Now select:
Update from-> using script-> change location-> BLN-AL20. It will flash OEM-Info and then ask for your bootloader unlock code and continue. Now wait patiently for it to finish. Once flashing is complete select to keep Bootloader unlocked.
Upon first boot you won't have network signal. Solution is in the linked thread but dont ignore it fix it first and after that flash Pixys OS by following OP.
Now to extract Stock Recovery follow these:
Extract the main update.zip
Download Huawei Update Extractor from XDA. Search for it.
Launch Huawei Update Extractor and go to Settings and disable first option. Now press three dots to browse and navigate to extracted folder and select Update.app
Double click on Recovery_Ramdis.img and extract it to desktop. You will get animage file and another one. Delete the other one. Now flash image file as you would flash TWRP. If you need more help, Just ask.
Follow along. You're both in the same boat.