Develop Bugs

[Q] Wrong stock rom!!!

I tired to root my galaxy s3 but ended up bricking it for a while and all i got was the Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. After trying odin so many time i finally got it to work but now i have another issue...i put verizon 4.1 on my phone using odin instead of att. my att sim wont work and i dont know how i am going to get it back to att stock rom so i can use my phone again!!! if anyone know how to reset this please help i just got the phone and now i cant use it because it has Verizon instead of att galaxy s3 stock rom on it.:crying:

pimpjayjay said:
I tired to root my galaxy s3 but ended up bricking it for a while and all i got was the Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. After trying odin so many time i finally got it to work but now i have another issue...i put verizon 4.1 on my phone using odin instead of att. my att sim wont work and i dont know how i am going to get it back to att stock rom so i can use my phone again!!! if anyone know how to reset this please help i just got the phone and now i cant use it because it has Verizon instead of att galaxy s3 stock rom on it.:crying:
Click to expand...
Click to collapse
Did you ever flash android 4.3 on you're phone? (This is important)

Ali7000 said:
Did you ever flash android 4.3 on you're phone? (This is important)
Click to expand...
Click to collapse
it already had 4.3 i was trying to root it but the process faild and all i get is the error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again

pimpjayjay said:
it already had 4.3 i was trying to root it but the process faild and all i get is the error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again
Click to expand...
Click to collapse
Try these http://forum.xda-developers.com/showthread.php?t=2498233, stock at&t rooted without Knox (Believe me man, better without knox). But they are only leaks of the official firmware. I am not a professional developer so you might wanna create a new thread and ask if it's possible in you're situation.

Ali7000 said:
Try these http://forum.xda-developers.com/showthread.php?t=2498233, stock at&t rooted without Knox (Believe me man, better without knox). But they are only leaks of the official firmware. I am not a professional developer so you might wanna create a new thread and ask if it's possible in you're situation.
Click to expand...
Click to collapse
okay i will look it up and see if it works , thanks.

The Canadian and US phones are pretty similar. Maybe a Canadian rom will work?
You can find official firmware here: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware

audit13 said:
The Canadian and US phones are pretty similar. Maybe a Canadian rom will work?
You can find official firmware here: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Click to expand...
Click to collapse
No it won't work. Since it is a stock rom it most likely will not work, he won't be able to call, text, or use data.

Ali7000 said:
No it won't work. Since it is a stock rom it most likely will not work, he won't be able to call, text, or use data.
Click to expand...
Click to collapse
I wasn't sure if the OP could install some sort of stock firmware to get his phone going and then install the necessary radio.

audit13 said:
I wasn't sure if the OP could install some sort of stock firmware to get his phone going and then install the necessary radio.
Click to expand...
Click to collapse
The best choice for him is to stick to a custom rom until the AT&T 4.3 update releases.

Ali7000 said:
The best choice for him is to stick to a custom rom until the AT&T 4.3 update releases.
Click to expand...
Click to collapse
Wow. it seems as if you got people in here just giving you ODIN TARS to flash. i wouldnt listen/ flash anything than the leaked 4.3 update for att because MOST odin files have bootloader upgrades in them and if you are on 4.3 you will brick trying to restore stock

Andy_nu said:
Wow. it seems as if you got people in here just giving you ODIN TARS to flash. i wouldnt listen/ flash anything than the leaked 4.3 update for att because MOST odin files have bootloader upgrades in them and if you are on 4.3 you will brick trying to restore stock
Click to expand...
Click to collapse
Hah Yah man I've been through a lot sh**.
Sent from my SGH-I747M using XDA Premium 4 mobile app

At&t Tar files
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?

Ali7000 said:
Hah Yah man I've been through a lot sh**.
Sent from my SGH-I747M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?

Based on the OP, the phone is currently running Verizon's 4.1 which leads me to believe the bootloader has not been updated beyond 4.1.2 since recovery mode is accessible; therefore, I think flashing 4.11 or 4.1.2 stock roms would be fine.
As always, it's best to check the installed bootloader before proceeding with any more flashes.
I used the stock firmware from here to downgrade my Bell s3 from stock 4.1.2 to stock 4.1.1.
Stock firmware: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware

pimpjayjay said:
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Click to expand...
Click to collapse
Download the ATT Image
Current I747UCDLK3 (JB 4.1.1)
http://forum.xda-developers.com/showthread.php?t=1739426

audit13 said:
Based on the OP, the phone is currently running Verizon's 4.1 which leads me to believe the bootloader has not been updated beyond 4.1.2 since recovery mode is accessible; therefore, I think flashing 4.11 or 4.1.2 stock roms would be fine.
As always, it's best to check the installed bootloader before proceeding with any more flashes.
I used the stock firmware from here to downgrade my Bell s3 from stock 4.1.2 to stock 4.1.1.
Stock firmware: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Click to expand...
Click to collapse
i wouldnt flash the bootloader just to to be safe though. id flash the recovery from the root forum and then install a cm or aosp ROM.
or open the tar and make sure there are not bootloader related files i forgot all of them but one is mbl. something and 1,2,3 theres a post on here how to check i just dont know where

Quick Question about 4.3 AT&T In Download Mode (Bricked)

I have a Galaxy S3 AT&T i747 Variant, and it is hard bricked, can't even turn on.
if I am able to get my phone Unbricked and into download mode, what will I do from there?
I have the 4.3 Bootloader I believe.
I know there isn't any odin fw for this right now, but my question is can I use T-Mobiles 4.3 Odin file?
At least to re-root, and install CWM, and reinstall my bootloader & Correct rom?
Or will this just not work at all....?
Thanks, sorry for the annoying questions lol.

If you can get into download mode, you could try and install a custom recovery to install a custom ROM.
I don't recommend flashing a T-Mobile ROM because the hardware isn't the same.

lemonboi5 said:
I have a Galaxy S3 AT&T i747 Variant, and it is hard bricked, can't even turn on.
if I am able to get my phone Unbricked and into download mode, what will I do from there?
I have the 4.3 Bootloader I believe.
I know there isn't any odin fw for this right now, but my question is can I use T-Mobiles 4.3 Odin file?
At least to re-root, and install CWM, and reinstall my bootloader & Correct rom?
Or will this just not work at all....?
Thanks, sorry for the annoying questions lol.
Click to expand...
Click to collapse
If you use the T-Mobile Odin files you will absolutely need a jtag. You cannot flash bootloader for a different variant it equals jtag.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

lemonboi5 said:
I have a Galaxy S3 AT&T i747 Variant, and it is hard bricked, can't even turn on.
if I am able to get my phone Unbricked and into download mode, what will I do from there?
I have the 4.3 Bootloader I believe.
I know there isn't any odin fw for this right now, but my question is can I use T-Mobiles 4.3 Odin file?
At least to re-root, and install CWM, and reinstall my bootloader & Correct rom?
Or will this just not work at all....?
Thanks, sorry for the annoying questions lol.
Click to expand...
Click to collapse
Hey, check out this post, its for T-MOBILE but if you get the requirements for the I747 and not the T999, this should work. Only way to do it without a Jtag, and that may not even work.
http://forum.xda-developers.com/showthread.php?t=2439367

Ive never done this or anything. I was just wondering because TMO has 4.3 odin files but nooooooo not AT&T
Thanks for all the replies, Ive tried every last debrick image at least 8 times, Im sending it off Thursday for a JTAG

[Q] Help!! ROM flashing problems

Before I get to the point let me explain what happened. I attempted to root my S3. It did work up until I got to the point where I was ready to flash a ROM and it didn't work. I received the "status 7" error on CWM and I receive an error on TWRP that means the same thing. So what I did since I couldn't restore from a backup that I would get bootloops from, I attempted to install a ROM that was .tar or md5.tar through ODIN which only worked for original firmware (given in the screenshot). I have managed to install this ROM on my phone through TWRP but unfortunately it is for TMobile and somehow my AT&T service works on it. Here is a screenshot of the phone. I have tried flashing "aokp_task650_d2lte_kitkat_6.3.2014" that is made for the AT&T S3 but no matter what I try to flash it will not flash. I have already tried doing the "ASSERTS" method but it did not work. Can someone please help me fix this issue??? :/

dreammaster252 said:
Before I get to the point let me explain what happened. I attempted to root my S3. It did work up until I got to the point where I was ready to flash a ROM and it didn't work. I received the "status 7" error on CWM and I receive an error on TWRP that means the same thing. So what I did since I couldn't restore from a backup that I would get bootloops from, I attempted to install a ROM that was .tar or md5.tar through ODIN which only worked for original firmware (given in the screenshot). I have managed to install this ROM on my phone through TWRP but unfortunately it is for TMobile and somehow my AT&T service works on it. Here is a screenshot of the phone. I have tried flashing "aokp_task650_d2lte_kitkat_6.3.2014" that is made for the AT&T S3 but no matter what I try to flash it will not flash. I have already tried doing the "ASSERTS" method but it did not work. Can someone please help me fix this issue??? :/
Click to expand...
Click to collapse
The hybrid firmware thing shouldn't really happen but for some reason, cross flashing between T999 (T-Mobile) & i747 (AT&T) sometimes happens without necessarily causing a brick. I would suggest you do a complete stock restore to AT&T 4.3JB firmware (UCUEMJB). Thereafter, you can go back to flashing your preferred custom ROM. Since you appear to be able to get to TWRP, you can first, from custom recovery, remove all existing firmware including OS and then reinstall the stock firmware. It appears the bootloader is still UCUEMJB so flashing AT&T stock firmware shouldn't be a problem. Please see the thread below for 4.3 stock restore...
http://forum.xda-developers.com/showthread.php?t=2658486

Larry2999 said:
The hybrid firmware thing shouldn't really happen but for some reason, cross flashing between T999 (T-Mobile) & i747 (AT&T) sometimes happens without necessarily causing a brick. I would suggest you do a complete stock restore to AT&T 4.3JB firmware (UCUEMJB). Thereafter, you can go back to flashing your preferred custom ROM. Since you appear to be able to get to TWRP, you can first, from custom recovery, remove all existing firmware including OS and then reinstall the stock firmware. It appears the bootloader is still UCUEMJB so flashing AT&T stock firmware shouldn't be a problem. Please see the thread below for 4.3 stock restore...
http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
So in this case, I just flash everything that it gives me correct? Is the stock ROM still rooted? If it is not then what rooting process do you suggest I go through? If it is a rooted ROM. Then do you recommend I unroot it and root it again or take some other alternative method? I really appreciate your help

dreammaster252 said:
So in this case, I just flash everything that it gives me correct? Is the stock ROM still rooted? If it is not then what rooting process do you suggest I go through? If it is a rooted ROM. Then do you recommend I unroot it and root it again or take some other alternative method? I really appreciate your help
Click to expand...
Click to collapse
It's a complete stock image which will take you to as near factory condition as you can get. This means it is unrooted. You would need to re-root after (successful) firmware installation. Prior to flashing the firmware, please remember to use custom recovery to remove all existing firmware including OS. Once you've restored the firmware, there are several ways to root but my preferred method is SafeRoot. You can find the download links and instructions to SafeRoot in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2565758
You can also try Option 2 in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2538991

Larry2999 said:
It's a complete stock image which will take you to as near factory condition as you can get. This means it is unrooted. You would need to re-root after (successful) firmware installation. Prior to flashing the firmware, please remember to use custom recovery to remove all existing firmware including OS. Once you've restored the firmware, there are several ways to root but my preferred method is SafeRoot. You can find the download links and instructions to SafeRoot in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2565758
You can also try Option 2 in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2538991
Click to expand...
Click to collapse
I am running 4.4.2 on my S3 (AOKP Task650) but unfortunately I am receiving some battery drain. Is there a Kernel I could use to prevent this and save more battery? Which Kernel do you recommend most? Also I am having issues with my Data. I get "E" for edge in a 4G LTE area? Is there a radio that I can flash or APN for this to fix that problem?

dreammaster252 said:
I am running 4.4.2 on my S3 (AOKP Task650) but unfortunately I am receiving some battery drain. Is there a Kernel I could use to prevent this and save more battery? Which Kernel do you recommend most? Also I am having issues with my Data. I get "E" for edge in a 4G LTE area? Is there a radio that I can flash or APN for this to fix that problem?
Click to expand...
Click to collapse
just to confirm, you re on ucuemjb bootloader, and installed/running Task650 4.4.4 rom 7.21.2014 (at this writing thats the latest update for the rom)
right?
sorry last time i tried to flash task650 rom, i got errors concerning the bootloader, went back to CM11 which has been my go-to-go rom and everything works fine, after you respond i will flash and get back to you on the network issues
thanks

How to manually update I747 to 4.4.2

Hey guys,
I got a I747 I want to give to my mother as a gift.
I downgraded 4.1.2 to 4.1.1 and ran the secret menu unlock to unlock the sim card, that worked perfectly.
Now I want to update this out of 4.1.1 to 4.4.2 but I cannot find a stock firmware to run on odin anywhere.
Do I need to go to 4.3 first? Is there a stock firmware for that?
SamMobile stops at 4.1.2... OTA obviously doesn't work.
How Can I get this done..

Iz3man said:
Hey guys,
I got a I747 I want to give to my mother as a gift.
I downgraded 4.1.2 to 4.1.1 and ran the secret menu unlock to unlock the sim card, that worked perfectly.
Now I want to update this out of 4.1.1 to 4.4.2 but I cannot find a stock firmware to run on odin anywhere.
SamMobile stops at 4.1.2... OTA obviously doesn't work.
How Can I get this done..
Click to expand...
Click to collapse
You can just flash stock 4.1.2 firmware from sammobile and then run OTA updates.
I also found this on sammobile: Canada (Bell Mobile) (Black Edition), Version: Android 4.4.2, PDA: I747MVLUFNE6
CSC: I747MOYCFNE6, MODEM: I747MVLUFNE6

audit13 said:
You can just flash stock 4.1.2 firmware from sammobile and then run OTA updates.
I also found this on sammobile: Canada (Bell Mobile) (Black Edition), Version: Android 4.4.2, PDA: I747MVLUFNE6
CSC: I747MOYCFNE6, MODEM: I747MVLUFNE6
Click to expand...
Click to collapse
Will it work though.
I have it already on my pc, I updated my wife's with it.
If I update to 4.1.2 will OTA come? Even with the I747(not the I747m) on the Bell network?

Iz3man said:
Will it work though.
I have it already on my pc, I updated my wife's with it.
If I update to 4.1.2 will OTA come? Even with the I747(not the I747m) on the Bell network?
Click to expand...
Click to collapse
I have a Motorola Atrix from Bell. I flashed it with stock ATT firmware and received OTA updates from ATT over wi-fi.
Since you have the i747, start with stock pre-rooted ATT 4.1.1. This will flash the stock recovery, radio, and bootloader. Run triangle away, flash a stock unrooted ATT stock 4.1.1 ROM, and take the OTA updates.
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=135374642

audit13 said:
I have a Motorola Atrix from Bell. I flashed it with stock ATT firmware and received OTA updates from ATT over wi-fi.
Since you have the i747, start with stock pre-rooted ATT 4.1.1. This will flash the stock recovery, radio, and bootloader. Run triangle away, flash a stock unrooted ATT stock 4.1.1 ROM, and take the OTA updates.
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=135374642
Click to expand...
Click to collapse
Ok, so I guess it wasn't clear, my bad.
I have 4.1.1 stock firmware on my att 1747. It has never been rooted.
I run the Ota and I got an error, now it tells me "Your software is up to date".
Can I flash a bell i747m 4.4.2 image onto this i747 or will it brick?

Iz3man said:
Ok, so I guess it wasn't clear, my bad.
I have 4.1.1 stock firmware on my att 1747. It has never been rooted.
I run the Ota and I got an error, now it tells me "Your software is up to date".
Can I flash a bell i747m 4.4.2 image onto this i747 or will it brick?
Click to expand...
Click to collapse
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.

audit13 said:
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
Click to expand...
Click to collapse
Alright, I have the stock recovery. How do I not flash the radio and boatloads when using the firmware from sammobile?

You cant. You cannot flash another devices firmware. Odin wont let it happen and if it did youd end up hard bricked due to mixed firmware. For example your sbl1, modemst and param partitions (plus others) would be i747 and youd be flashing sbl2, sbl3, rpm, etc from an I747M.
The only thing you could use are the system partition and kernel, nothing else. There are two ways to accomplish this, one is to build a rom from the firmware and flash that. The other is to flash with mobile odin, but that requires root and youd still have to be very careful.
Another priblem I see you encountering is you cannot run 4.4.2 without 4.3 or newer firmware. It will not boot otherwise.
You need to go to the General section and follow one of enewman17's tutorials to get to either 4.3 or 4.4.2. Personally, I dont see any other way you will be able to accomplish it.

audit13 said:
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
Click to expand...
Click to collapse
Alright, based on Doc holiday, and others they say It cannot be done and from my experience I beleive them.

Thank you,
It's very difficult to do this when others are giving bad advice.
So for the record, cannot flash i747m firmware to i747.
Thanks!
The annoying part here is I can do it with my m7, I just flashed the Dev edition onto my Bell m7 with no problems.

All devices are different in many ways. What is perfectly safe to do with one brand or model can brick another.
And I wouldnt call it "bad" advice... I've seen audit13 and others helping lots of folks with very good advice. We all make mistakes and we all have more we can learn about these devices. No one knows everything about this stuff and shouldnt let that prevent them from trying to help.
Those who are trying to help are doing so with the best of intentions and tell people what they think could be the best way to solve a given problem. In cases like this one, its easy to see how anyone would think its ok to flash different firmware between similar models based on being able to do so on other devices they are familiar with. (If I had gone into those forums I wouldve been telling people the opposite and ended up being wrong there.)
All I can say is chalk it up as a new lesson on a different device, and I hope you still appreciate that someone was trying to help.
@audit13 I hope none of this discourages you from helping. Ive seen plenty of threads where your advice was sound and appreciated, and I am glad you have been around to help so many people out!
Now, back on the problem at hand... if you want to be running the latest 4.4.2 kk, you will have the option to use the OS (/system and kernel) from either the I747 or I747M firmware. But first you must fully update to a minimum of the 4.3 MJB firmware for the I747. Once you have this running for your base firmware/bootloader, you can then run the Bell or AT&T (4.3 or 4.4.2) system. (I hope this is making sense!)
So first, update the full 4.3, MJB, firmware via Odin. (Theres a thread in General with the file, ill post the link in a min).
If you want to update to 4.4.2 firmware, you can then follow enewman17's tutorial to do so via OTA.
You can then either stay with that, or use Mobile Odin to flash ONLY the system and kernel from the Bell firmware.
Let me know if any of that needs better clarification! Also let us know what your ultimate goal is. From the options you have, where do you want to end up?
---------- Post added at 10:32 AM ---------- Previous post was at 10:26 AM ----------
Ok, here are some links.
Stock MJB firmware (flash in Odin)
http://forum.xda-developers.com/showthread.php?t=2722660
enewman17's thread for updating to 4.4.2 (high success rate)
http://forum.xda-developers.com/showthread.php?t=2789917
Official, unmodified 4.4.2 OTA
http://forum.xda-developers.com/showthread.php?t=2788012
After updating with the 4.3 firmware, you can first try using the official ota to update. Then, if that fails you can go to enewman17's thread and try his method.

DocHoliday77 said:
All devices are different in many ways. What is perfectly safe to do with one brand or model can brick another.
And I wouldnt call it "bad" advice... I've seen audit13 and others helping lots of folks with very good advice. We all make mistakes and we all have more we can learn about these devices. No one knows everything about this stuff and shouldnt let that prevent them from trying to help.
Those who are trying to help are doing so with the best of intentions and tell people what they think could be the best way to solve a given problem. In cases like this one, its easy to see how anyone would think its ok to flash different firmware between similar models based on being able to do so on other devices they are familiar with. (If I had gone into those forums I wouldve been telling people the opposite and ended up being wrong there.)
All I can say is chalk it up as a new lesson on a different device, and I hope you still appreciate that someone was trying to help.
@audit13 I hope none of this discourages you from helping. Ive seen plenty of threads where your advice was sound and appreciated, and I am glad you have been around to help so many people out! ]
:thumbup::beer::sly:
err on the side of kindness
Click to expand...
Click to collapse

[Q] Galaxy TabPro 10.1 T520 unroot

hello,
i want to unroot my device and restore completely to stock and having hard time finding any tutorials on how to do it. Im running 4.4.2 stock rooted rom build# KOT49H.T520UEUAND1.
my specific questions is where do i get the stock original firmware for USA Wifi version, how to install it and how do i take off my TWRP custom recovery and restore it to stock.
Im not new to the whole rooting and unrooting deal as ive done it with numerous smartphones with no problems just i dont want to mess anything up with my tablet. a simple guide will be satisfactory thanks!

Go to sammobile.com. Click on the Firmware Tab and search for your model. If you are in the USA, use the cellular South firmware. Download it. Unzip the file. Use Odin to load it on your tablet (if you need instructions, let me know). It will wipe your recovery and unroot the tablet. You should also factory reset before and after loading. You will be back to stock

hey thanks man!

Thanks, I had same question.
Sent from my SM-T520 using XDA Free mobile app

I'm trying to figure out which version I should download? I've got a nordic countries edition (NEE) KOT49H.T520XXUANI1
http://www.sammobile.com/firmwares/database/SM-T520/NEE/
Sorry seems like I found it.