Develop Bugs

[Q] ADB Shell Won't Allow me to run as SU

So I'm trying to get into su to run gfree_verify to make sure my permaroot S-off/SIM card unlock/SuperCID was successful, but I'm getting a permission denied error.
What happens is, I type adb shell, then I type su, there's a really long delay, then it tells me Permission Denied. However, when I run the Terminal Emulator from my phone and type in the su command, I get root access just fine.
I used the "official" method that is on the HTC Vision Wiki that is located here. The only thing, however, is that my Android SDK install wasn't installed using any type of installer. I just extracted a zip file and shoved it in a random folder. I did make sure to run the Command Prompt as Administrator before issuing the adb shell command, but I'm still unable to get superuser access through the PC. Trying to use the adb root command gives me an "adbd cannot run as root in production builds" error.
Did I do something incorrectly?

adb kill-server
adb start-server
See if that works. If not, try rebooting your computer.
Sent from a Western Union telegram.

Does the Superuser app seem to be installed correctly on your phone ?
Do you have the output from gfree ? I wonder if it didn't work correctly with your kernel, it doesn't work with all kernels. What ROM/kernel do you have ?
Which procedure did you use, the one in the Wiki, or one involving dd'ing the eng hboot ?

steviewevie said:
Does the Superuser app seem to be installed correctly on your phone ?
Do you have the output from gfree ? I wonder if it didn't work correctly with your kernel, it doesn't work with all kernels. What ROM/kernel do you have ?
Which procedure did you use, the one in the Wiki, or one involving dd'ing the eng hboot ?
Click to expand...
Click to collapse
I rebooted the daemeon, computer, and also the phone. No dice.
The Superuser app is correctly installed. When I ran Adfree and attempted to go into SU in Terminal, I got the usual Allow Superuser access dialog. Both worked without any problems; like I said, I can get root access from the on-the-phone terminal, it's when I attempted to get root access from the adb shell command on my computer where I have problems.
No special ROMs, completely stock post-November OTA update. The only thing I flashed after permarooting was the Clockwork Recovery mod, but adb shell SU wasn't working before this. I initially used some outdated instructions (involving the use of the dd command, and the wpathis.ko or something). I read some more and learned these were out of dated, so I unrooted. I then used the instructions that are on the wiki using gfree to permroot.
gfree_verify works without any problems if I run it from the Terminal Emulator on my phone. Returns the proper values to indicate I'm SIM Unlocked, SuperCID, and S-off. I'm glad it works, but I still don't like the fact I can't use the adb shell. Typing characters on the G2 is a pain in the ass.
I still want to know why I can't enter superuser from the PC adb shell. Am I doing something incorrectly?
Thanks a lot for your help!

Try clearing data for the SuperUser app?

go in your recovery screen from boot, select your mount options, and mount everything lol. Not sure if it'll fix it but everytime I have adb permission issues that seems to fix it and I don't think it could hurt.

dietotherhythm said:
go in your recovery screen from boot, select your mount options, and mount everything lol. Not sure if it'll fix it but everytime I have adb permission issues that seems to fix it and I don't think it could hurt.
Click to expand...
Click to collapse
This worked perfectly! When I entered su from the command prompt, the SuperUser app popped up on the phone's side and I hit allow. It then let me through.
What exactly was broken though? Why did mounting everything from the Clockwork Recovery menu fix this?

Having problems rooting

ADB is not friendly to me. I was able to root my g1 with pure ease. I cant get started with adb, I dont know why I cant get $, I've read several guides and I'm just about to give up. I'm running 2.2 on my g2.
I do have a couple of questions:
Are rooting with rage or visionary 14 the only way to root?
Are there any root guides out there that dont require ADB?
ADB is a ****ing pain in the ass to me, especially since I've tried everything and cant get it to work. Also, the drivers that go on Win7 64bit just dont work.
Also when I do have root, can I get android updates?
Any help would be thankfully appreciated. Sorry if I'm a pain in the ass, but I'd like to know if there is an easier way.

I think you need the q&a section
Sent from my HTC Vision using XDA App

This will help u get adb working...
http://forum.xda-developers.com/showthread.php?t=865685

If you can't figure out adb, you definitely shouldn't be rooting your phone.
Some ROMS disable OTA notifications while others allow it. However, so long as you have a custom recovery, even if you get the notification and download it, you wont be able to flash it.

dictionary said:
If you can't figure out adb, you definitely shouldn't be rooting your phone.
Some ROMS disable OTA notifications while others allow it. However, so long as you have a custom recovery, even if you get the notification and download it, you wont be able to flash it.
Click to expand...
Click to collapse
while my knowledge of adb isnt stellar, I have run into problems using it. I'm going to try this new link to the guide and see if it works.
Still if anyone knows other solutions, chime in.

Try the guide linked above. The drivers in the HTC Sync package (see the guide) definitely do work on Win 7 64-bit.

Clicked on SDK Manager.exe and it gave me the attached message; anti-virus is off and bare ass minimum services are running and I added the line in variables.
Any ideas?

sorry about the ****ty pics

cwis said:
Clicked on SDK Manager.exe and it gave me the attached message; anti-virus is off and bare ass minimum services are running and I added the line in variables.
Any ideas?
Click to expand...
Click to collapse
Did you definitely add it to your path as it is suggesting in that window ? If so, I think you may need to reboot to pick that change up.

I did that just in case.
Actually, that path field was empty. So, I added it as is.

look up droid explorer

I made some leeway:
C:\Program Files (x86)\android-sdk-windows\tools>adb shell
$
$ adb push su /sdcard/su
$ adb push su /sdcard/su
$ adb: permission denied
good grief!!!!!!!

I've completely removed visionary before starting this procedure. Did I need temproot before attempting this?
Downloading and installing Droid Explorer. Thanks!
Also, I'm using this guide: http://forum.xda-developers.com/showthread.php?t=834228

No matter what I've done, permission denied.

The steps you are trying are actually to get temproot (it's an alternate method to Visionary), so you don't need to already be temprooted.
You don't want to run "adb push" commands after you have run "adb shell". ADB commands will no longer work until you exit the shell (simply type exit and hit enter---you'll notice your command prompt will change back to normal). If you are following the guide you linked to, you'll notice adb shell is not run prior to running the first push command.

ianmcquinn said:
The steps you are trying are actually to get temproot (it's an alternate method to Visionary), so you don't need to already be temprooted.
You don't want to run "adb push" commands after you have run "adb shell". ADB commands will no longer work until you exit the shell (simply type exit and hit enter---you'll notice your command prompt will change back to normal). If you are following the guide you linked to, you'll notice adb shell is not run prior to running the first push command.
Click to expand...
Click to collapse
^^^^ what he said.
You are trying to run adb on your phone there, which isn't right. That's your phone's command prompt, the "$". "adb" is something totally different on your phone. You need to run the adb commands on your PC. That's why "adb shell" worked (because you ran it on your PC), then "adb push" didn't (because you tried to run it on your phone).

steviewevie said:
^^^^ what he said.
You are trying to run adb on your phone there, which isn't right. That's your phone's command prompt, the "$". "adb" is something totally different on your phone. You need to run the adb commands on your PC. That's why "adb shell" worked (because you ran it on your PC), then "adb push" didn't (because you tried to run it on your phone).
Click to expand...
Click to collapse
I did run the commands from my pc. But still permission denied.

cwis said:
I did run the commands from my pc. But still permission denied.
Click to expand...
Click to collapse
"permission denied" is a message from your phone, not your PC.
The $ prompt that you copied and pasted up shows that you were running the commands on your phone. As soon as you do "adb shell", then any commands you are entering after that are going on your phone, even though they're physically being typed on your PC - because your PC has started a command prompt on your phone, as shown by the $ prompt.

cwis said:
I did run the commands from my pc. But still permission denied.
Click to expand...
Click to collapse
Basically, don't start by typing adb shell. The instructions you are trying to follow don't even say to do that anywhere. I highly recommend you reread the instructions very carefully and follow them exactly. Rooting this phone is actually pretty simple if you just do exactly as the guide states. If you don't know what you are doing and mistype something in some of the later steps though, you can seriously screw up your phone...

I think part of the confusion is that the commands listed on the guide all have "$" at the beginning of them, probably because whoever wrote that was using a Linux PC or maybe a Mac. You are actually executing these commands from your Windows command shell so they will look more like:
D:\Android SDK\platform-tools>adb push su /sdcard/su
Click to expand...
Click to collapse
(depending on where you have the SDK installed)
instead of:
$ adb push su /sdcard/su
Click to expand...
Click to collapse
but of course you only need to type:
adb push su /sdcard/su
Click to expand...
Click to collapse
Again these are typed from your windows command shell.

how to get root shell after inputting "adb shell"?

Hello everyone!!!
I want to know if there is a way to get a root shell after obtaining shell prompt using "adb shell".
I tried pushing some files, moving directories into "/data" and type "ls" but linux always gave me a "Permissioin denied" error.
What I want to do is to run a console program which is compiled by ARM compiler in a console mode. So I need to get an access to run a program in console mode of HTC Desire HD.
If you let me know, I will very very appreciate your help.
Thanks in advance.

Type command:
su
Click to expand...
Click to collapse
It will give you root shell if you have a rooted phone.

Um.. I already installed VISIONary. So I guess the phone I got is a rooted one.
Actually I'm a kind of outsiders about smart-phones~~!
So do I need to install some apps to make a rooted phone?
Just installing VISIONary doesn't seem enough.. right?

Visionary temproot or permroot is enough, just type "su" in adb shell.

Despite that I installed VISIONary, run permroot and reboot my phone, su doesn't give root shell.
I don't know why

do you know what root shell is? when you type su if a # appears on the next line ur logged into root

AndroHero said:
do you know what root shell is? when you type su if a # appears on the next line ur logged into root
Click to expand...
Click to collapse
Sure.
I got root shell afterwards.
Thank you~~~!

[Q] [SOLVED] Attempted to root, SU Permision Denied

I am attempted to root my phone as the new guide on the wiki.
Once I get to this secion:
In this shell:
Remark: When you run su for the first time in the adb shell make sure the the screen of the phone is unlocked. Because when you enter the command the Superuser app will show up and ask you if you want to grant superuser access to app Unknown (2000).
Check the Remember check box and click allow.
$ su
# cd /data/local/tmp
# stop ril-daemon
# ./gfree_verify
I am unable to get SU to enable, it'll immidetly say permision denied and does not prompt anything on my phone and does not allow me to gain access so I am unable to verify Gfree
Thanks in advance for the help

What's the exact commands you're typing in the command prompt?

I have shell, so I type
$ su *$ is not typed, already shows in the command prompt*
but I think I know what I di dwrong and I am trying it again

Did you manage to get the root access?
Care to tell how it's done for you? Because I am having the same problem

I pretty much just followed the steps as stated in the wiki.
Just make sure you do all the steps required and more importantly that you type properly, thats what messed me up, I went like most of the way in to find out I forgot to do something properly @ the start.
You can also copy and paste the commands into your command line window which I did the second time round and that pretty much solved all problems for me , its fairly simple to be honest

KFHD 8.9 Help, Please

I rooted my KFHD 8.9, installed the Play Market, Go Launcher HD, and a few other things. Everything went smoothly...until I decided to install TSF Shell 3d. I moved it to system/app, changed permissions, and rebooted. Now, TSF is stuck in a loop and I can't access ES File Explorer long enough to delete it from the device. When I try using Android Commander, it shows "No Root" and I'm not very experienced at ADB. Is there some way to get this off my device so it's usable again?
When I boot up, it boots normally, then before I can unlock the lockscreen, I get "TSF Shell has Stopped" with a button below it to ok the message. When I tap it, it goes away for a split second, then comes right back...over and over.
Any tips or advice would be greatly appreciated. Thanks.
(I posted this here because I did not see a Q and A or Help section that was KFHD 8.9 specific. If it needs to be moved, feel free and I apologize.)

couple of things to try. if you can access the pull down menu go to more settings, applications then find tsf shell and clear defaults. reboot.
if that doesn't work reboot to recovery and do a factory reset.
adb reboot recovery.

I will try the adb reboot recovery option. I can't get into anything on the device itself long enough to do anything. Also, I didn't even set TSF as default home. I'm thinking (the way adb is acting), that I don't have full root privileges. When I try to delete the file using adb, I get a permission denied error.

slim6596 said:
I will try the adb reboot recovery option. I can't get into anything on the device itself long enough to do anything. Also, I didn't even set TSF as default home. I'm thinking (the way adb is acting), that I don't have full root privileges. When I try to delete the file using adb, I get a permission denied error.
Click to expand...
Click to collapse
Have you tried:
Code:
adb shell su -c "rm /path/to/TSF.apk"
...replacing "/path/to/TSF.apk" with the actual path to the actual name of the TSF app you want deleted? Just be sure to leave the quotes around the command or it may not work.

soupmagnet said:
Have you tried:
Code:
adb shell su -c "rm /path/to/TSF.apk"
...replacing "/path/to/TSF.apk" with the actual path to the actual name of the TSF app you want deleted? Just be sure to leave the quotes around the command or it may not work.
Click to expand...
Click to collapse
I tried adb shell su -c rm/system/app/TSF Shell 3D
"permission denied" and then "device not found" when I tried editing the pathname. What am I missing? The path to the Kindle?

slim6596 said:
I tried adb shell su -c rm/system/app/TSF Shell 3D
"permission denied" and then "device not found" when I tried editing the pathname. What am I missing? The path to the Kindle?
Click to expand...
Click to collapse
There is a space between the 'rm' command and the path. Also you need to get the exact name of the file you want removed...
Code:
adb shell su -c "ls /system/app"
And again, don't forget the quotes...meaning leave them there.

"Is" or "rm"?
........and thanks for trying to help me out. I really appreciate it.

slim6596 said:
"Is" or "rm"?
........and thanks for trying to help me out. I really appreciate it.
Click to expand...
Click to collapse
'ls' is the list command. Use it to list the contents of either the '/system/app' directory or the '/data/app' directory to find the exact name of the 'apk' that is causing problems, then use the 'rm' (remove) command to get rid of it.

I got it to work. TSF is gone (yahoo!). So now I get to start over. What I finally did was to do a total restore using KFFirstAide. Thanks you guys for pitching in and helping a newb. I appreciate it to no end.