So I'm trying to get into su to run gfree_verify to make sure my permaroot S-off/SIM card unlock/SuperCID was successful, but I'm getting a permission denied error.
What happens is, I type adb shell, then I type su, there's a really long delay, then it tells me Permission Denied. However, when I run the Terminal Emulator from my phone and type in the su command, I get root access just fine.
I used the "official" method that is on the HTC Vision Wiki that is located here. The only thing, however, is that my Android SDK install wasn't installed using any type of installer. I just extracted a zip file and shoved it in a random folder. I did make sure to run the Command Prompt as Administrator before issuing the adb shell command, but I'm still unable to get superuser access through the PC. Trying to use the adb root command gives me an "adbd cannot run as root in production builds" error.
Did I do something incorrectly?
adb kill-server
adb start-server
See if that works. If not, try rebooting your computer.
Sent from a Western Union telegram.
Does the Superuser app seem to be installed correctly on your phone ?
Do you have the output from gfree ? I wonder if it didn't work correctly with your kernel, it doesn't work with all kernels. What ROM/kernel do you have ?
Which procedure did you use, the one in the Wiki, or one involving dd'ing the eng hboot ?
steviewevie said:
Does the Superuser app seem to be installed correctly on your phone ?
Do you have the output from gfree ? I wonder if it didn't work correctly with your kernel, it doesn't work with all kernels. What ROM/kernel do you have ?
Which procedure did you use, the one in the Wiki, or one involving dd'ing the eng hboot ?
Click to expand...
Click to collapse
I rebooted the daemeon, computer, and also the phone. No dice.
The Superuser app is correctly installed. When I ran Adfree and attempted to go into SU in Terminal, I got the usual Allow Superuser access dialog. Both worked without any problems; like I said, I can get root access from the on-the-phone terminal, it's when I attempted to get root access from the adb shell command on my computer where I have problems.
No special ROMs, completely stock post-November OTA update. The only thing I flashed after permarooting was the Clockwork Recovery mod, but adb shell SU wasn't working before this. I initially used some outdated instructions (involving the use of the dd command, and the wpathis.ko or something). I read some more and learned these were out of dated, so I unrooted. I then used the instructions that are on the wiki using gfree to permroot.
gfree_verify works without any problems if I run it from the Terminal Emulator on my phone. Returns the proper values to indicate I'm SIM Unlocked, SuperCID, and S-off. I'm glad it works, but I still don't like the fact I can't use the adb shell. Typing characters on the G2 is a pain in the ass.
I still want to know why I can't enter superuser from the PC adb shell. Am I doing something incorrectly?
Thanks a lot for your help!
Try clearing data for the SuperUser app?
go in your recovery screen from boot, select your mount options, and mount everything lol. Not sure if it'll fix it but everytime I have adb permission issues that seems to fix it and I don't think it could hurt.
dietotherhythm said:
go in your recovery screen from boot, select your mount options, and mount everything lol. Not sure if it'll fix it but everytime I have adb permission issues that seems to fix it and I don't think it could hurt.
Click to expand...
Click to collapse
This worked perfectly! When I entered su from the command prompt, the SuperUser app popped up on the phone's side and I hit allow. It then let me through.
What exactly was broken though? Why did mounting everything from the Clockwork Recovery menu fix this?
Related
ADB is not friendly to me. I was able to root my g1 with pure ease. I cant get started with adb, I dont know why I cant get $, I've read several guides and I'm just about to give up. I'm running 2.2 on my g2.
I do have a couple of questions:
Are rooting with rage or visionary 14 the only way to root?
Are there any root guides out there that dont require ADB?
ADB is a ****ing pain in the ass to me, especially since I've tried everything and cant get it to work. Also, the drivers that go on Win7 64bit just dont work.
Also when I do have root, can I get android updates?
Any help would be thankfully appreciated. Sorry if I'm a pain in the ass, but I'd like to know if there is an easier way.
I think you need the q&a section
Sent from my HTC Vision using XDA App
This will help u get adb working...
http://forum.xda-developers.com/showthread.php?t=865685
If you can't figure out adb, you definitely shouldn't be rooting your phone.
Some ROMS disable OTA notifications while others allow it. However, so long as you have a custom recovery, even if you get the notification and download it, you wont be able to flash it.
dictionary said:
If you can't figure out adb, you definitely shouldn't be rooting your phone.
Some ROMS disable OTA notifications while others allow it. However, so long as you have a custom recovery, even if you get the notification and download it, you wont be able to flash it.
Click to expand...
Click to collapse
while my knowledge of adb isnt stellar, I have run into problems using it. I'm going to try this new link to the guide and see if it works.
Still if anyone knows other solutions, chime in.
Try the guide linked above. The drivers in the HTC Sync package (see the guide) definitely do work on Win 7 64-bit.
Clicked on SDK Manager.exe and it gave me the attached message; anti-virus is off and bare ass minimum services are running and I added the line in variables.
Any ideas?
sorry about the ****ty pics
cwis said:
Clicked on SDK Manager.exe and it gave me the attached message; anti-virus is off and bare ass minimum services are running and I added the line in variables.
Any ideas?
Click to expand...
Click to collapse
Did you definitely add it to your path as it is suggesting in that window ? If so, I think you may need to reboot to pick that change up.
I did that just in case.
Actually, that path field was empty. So, I added it as is.
look up droid explorer
I made some leeway:
C:\Program Files (x86)\android-sdk-windows\tools>adb shell
$
$ adb push su /sdcard/su
$ adb push su /sdcard/su
$ adb: permission denied
good grief!!!!!!!
I've completely removed visionary before starting this procedure. Did I need temproot before attempting this?
Downloading and installing Droid Explorer. Thanks!
Also, I'm using this guide: http://forum.xda-developers.com/showthread.php?t=834228
No matter what I've done, permission denied.
The steps you are trying are actually to get temproot (it's an alternate method to Visionary), so you don't need to already be temprooted.
You don't want to run "adb push" commands after you have run "adb shell". ADB commands will no longer work until you exit the shell (simply type exit and hit enter---you'll notice your command prompt will change back to normal). If you are following the guide you linked to, you'll notice adb shell is not run prior to running the first push command.
ianmcquinn said:
The steps you are trying are actually to get temproot (it's an alternate method to Visionary), so you don't need to already be temprooted.
You don't want to run "adb push" commands after you have run "adb shell". ADB commands will no longer work until you exit the shell (simply type exit and hit enter---you'll notice your command prompt will change back to normal). If you are following the guide you linked to, you'll notice adb shell is not run prior to running the first push command.
Click to expand...
Click to collapse
^^^^ what he said.
You are trying to run adb on your phone there, which isn't right. That's your phone's command prompt, the "$". "adb" is something totally different on your phone. You need to run the adb commands on your PC. That's why "adb shell" worked (because you ran it on your PC), then "adb push" didn't (because you tried to run it on your phone).
steviewevie said:
^^^^ what he said.
You are trying to run adb on your phone there, which isn't right. That's your phone's command prompt, the "$". "adb" is something totally different on your phone. You need to run the adb commands on your PC. That's why "adb shell" worked (because you ran it on your PC), then "adb push" didn't (because you tried to run it on your phone).
Click to expand...
Click to collapse
I did run the commands from my pc. But still permission denied.
cwis said:
I did run the commands from my pc. But still permission denied.
Click to expand...
Click to collapse
"permission denied" is a message from your phone, not your PC.
The $ prompt that you copied and pasted up shows that you were running the commands on your phone. As soon as you do "adb shell", then any commands you are entering after that are going on your phone, even though they're physically being typed on your PC - because your PC has started a command prompt on your phone, as shown by the $ prompt.
cwis said:
I did run the commands from my pc. But still permission denied.
Click to expand...
Click to collapse
Basically, don't start by typing adb shell. The instructions you are trying to follow don't even say to do that anywhere. I highly recommend you reread the instructions very carefully and follow them exactly. Rooting this phone is actually pretty simple if you just do exactly as the guide states. If you don't know what you are doing and mistype something in some of the later steps though, you can seriously screw up your phone...
I think part of the confusion is that the commands listed on the guide all have "$" at the beginning of them, probably because whoever wrote that was using a Linux PC or maybe a Mac. You are actually executing these commands from your Windows command shell so they will look more like:
D:\Android SDK\platform-tools>adb push su /sdcard/su
Click to expand...
Click to collapse
(depending on where you have the SDK installed)
instead of:
$ adb push su /sdcard/su
Click to expand...
Click to collapse
but of course you only need to type:
adb push su /sdcard/su
Click to expand...
Click to collapse
Again these are typed from your windows command shell.
I have S-OFF but now temp root visionary won't work for me and I can't get root access. Can only $ using adb so I can't push files. Any help would be apperciated
Try the method in the Wiki - http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
You should still be able to push files via adb though, I don't understand your comment about getting $ with adb (don't do an "adb shell" before you run "adb push", adb is a command for running on your PC, not your phone).
Same here. I did the wiki instructions. but /data/local/root gave me the cp:not found
and /su no a directory. visionary doesnt work. and rage never works right. my "root shell" doesnt let me do su. i think i might have no su. i'm really confused why this wont work. I've done four factory resets trying the rage method and the visionary method. I have S-OFF but nothing else as far as I can tell.
EDIT: I've read a bunch of threads on this and still can't find a solution
I've read in the Rage thread that there were issues with Visionary seeing root access. I would honestly give rage another shot. It worked brilliantly for me, you just have to have ADB configured first.
I did. i get temp root but gfree wont work. i have cid and sim unlock and s off but not system r/w. and when i run /data/local/tmp/root. also my phone will randomly restart now.
steviewevie said:
Try the method in the Wiki - http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
You should still be able to push files via adb though, I don't understand your comment about getting $ with adb (don't do an "adb shell" before you run "adb push", adb is a command for running on your PC, not your phone).
Click to expand...
Click to collapse
I tried this and it didn't work for me.
Can I reflash somehow to the stock rom? I think visionary somehow messed up my phone.
I reflashed to 1.12 and rage worked!
So if visionary has messed up your /su you need to reflash to stock because your /system is messed up.
http://forum.xda-developers.com/showpost.php?p=10966727&postcount=63
had the same problem. had s-off and all that fun stuff. had to do this.
Hello everyone!!!
I want to know if there is a way to get a root shell after obtaining shell prompt using "adb shell".
I tried pushing some files, moving directories into "/data" and type "ls" but linux always gave me a "Permissioin denied" error.
What I want to do is to run a console program which is compiled by ARM compiler in a console mode. So I need to get an access to run a program in console mode of HTC Desire HD.
If you let me know, I will very very appreciate your help.
Thanks in advance.
Type command:
su
Click to expand...
Click to collapse
It will give you root shell if you have a rooted phone.
Um.. I already installed VISIONary. So I guess the phone I got is a rooted one.
Actually I'm a kind of outsiders about smart-phones~~!
So do I need to install some apps to make a rooted phone?
Just installing VISIONary doesn't seem enough.. right?
Visionary temproot or permroot is enough, just type "su" in adb shell.
Despite that I installed VISIONary, run permroot and reboot my phone, su doesn't give root shell.
I don't know why
do you know what root shell is? when you type su if a # appears on the next line ur logged into root
AndroHero said:
do you know what root shell is? when you type su if a # appears on the next line ur logged into root
Click to expand...
Click to collapse
Sure.
I got root shell afterwards.
Thank you~~~!
I cannot get a response from the original thread that is stickied so I figured I would ask here. I am currently s-off and on Froyo. Everytime I try to install a ROM it just bootloops. The only one that actually works in Kangdamnation (sp). I would love to do UKB but it bootloops as soon as the lockscreen pops up on first boot. I have the HTC extended battery, althought I doubt that has anything do to with these issues. I have tried to go back to s-on so I can get a new phone sent to me under warranty but am stuck.
Code:
adb devices (make sure ADB sees your phone if not, this is an appropriate time to ask for help :))
adb root
adb remount
adb push hboot_0.97.0000_336906.nb0 /data/local/
STOP HERE! If you're a dummy and didn't install Busybox with your SuperOneClick, download a Busybox Installer app from the Market and install it to /system/xbin/.
Once I get to this point the adb will find and show my phone but once i type in the adb root it says "adbd cannot run as root in production builds and if i try to continue to remount it says "remount failed: Operation not permitted"
I have checked to insure that busybox and root was installed with the superoneclick program
Please someone help me. Also, when i type in su to the cmd (i run it as admin) it says not allowed.
OK, I had my kindle running cyanogenmod 11. I was having problems with some apps running on it, root was acting weird. Root checkers said it was rooted, but some apps that required root weren't installing right.
Fast forward, I thought perhaps I needed to flash the new version. I got into recovery to run it and flash it and this is the error I have.
So all the forums said, just wipe it then it will work. Of course now I have no OS on the thing. TWRP is fine, but I can't use the tablet.
So some other forums suggested it's either a mounting to E:\ problem or a rooting problems. I can get in to ADB, I've pushed many different roms over and they all have similar errors.
All of the Root tools I can find require you to come in the front door. TWRP fails when it goes to 'fix permission' and every time I reboot says , 'root is gone, swipe to fix' but it's not seeming to stick.
Any ideas on how to make sure I can mount the new rom and get this back up and running.
As I said, I've tried many roms, directly downloaded from CM website: Download:
cm-12.1-20160129-NIGHTLY-d2tmo.zip (284.96 MB)
sha1: e461a1dc263d927de3b6748d3b877310e7b1fd39
Download: cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2tmo.zip (286.1 MB)
sha1: bfb989917775ff190b8b795d93c1e439ccf8a514
I'm running TWRP 2.6.0.0 and have a binary ADB driver of 1.0.31. I can ping 4.2.2.2 so I'm pretty sure since the issue is coming from the device itself, and the way it's erroring reminds me of other permission problems I've seen in other devices that it's a root issue.
Is there a simple command line ADB tool or something that I can use to validate/set root?
Thanks!
kyleyarbrough said:
OK, I had my kindle running cyanogenmod 11. I was having problems with some apps running on it, root was acting weird. Root checkers said it was rooted, but some apps that required root weren't installing right.
Fast forward, I thought perhaps I needed to flash the new version. I got into recovery to run it and flash it and this is the error I have.
So all the forums said, just wipe it then it will work. Of course now I have no OS on the thing. TWRP is fine, but I can't use the tablet.
So some other forums suggested it's either a mounting to E:\ problem or a rooting problems. I can get in to ADB, I've pushed many different roms over and they all have similar errors.
All of the Root tools I can find require you to come in the front door. TWRP fails when it goes to 'fix permission' and every time I reboot says , 'root is gone, swipe to fix' but it's not seeming to stick.
Any ideas on how to make sure I can mount the new rom and get this back up and running.
As I said, I've tried many roms, directly downloaded from CM website: Download:
cm-12.1-20160129-NIGHTLY-d2tmo.zip (284.96 MB)
sha1: e461a1dc263d927de3b6748d3b877310e7b1fd39
Download: cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2tmo.zip (286.1 MB)
sha1: bfb989917775ff190b8b795d93c1e439ccf8a514
I'm running TWRP 2.6.0.0 and have a binary ADB driver of 1.0.31. I can ping 4.2.2.2 so I'm pretty sure since the issue is coming from the device itself, and the way it's erroring reminds me of other permission problems I've seen in other devices that it's a root issue.
Is there a simple command line ADB tool or something that I can use to validate/set root?
Thanks!
Click to expand...
Click to collapse
Your TWRP version is out of date. Flash the 2.8.7.0 image from this thread, reboot into TWRP and make sure your TWRP version is now 2.8.7.0, and try flashing CM12.1 after that.
Sent from my Amazon Jem using XDA Labs
monster1612 said:
Your TWRP version is out of date. Flash the 2.8.7.0 image from this thread, reboot into TWRP and make sure your TWRP version is now 2.8.7.0, and try flashing CM12.1 after that.
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
HI! thanks for that advice. I wish I could. I've tried several methods, and although I can get into ADB shell, I can't access su:
besides kindle fire first aide and other batch files, I found some manual instructions:
http://forum.xda-developers.com/showthread.php?t=2277105
Here's what it tells me to do (among many other things): I realize this is just backing up stuff that doesn't exist etc, but it's indicative of the problems without having su.
adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot0block.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/boot of=/sdcard/stock-boot.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/recovery of=/sdcard/stock-recovery.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/system of=/sdcard/stock-system.img"
mkdir C:\KFHD8Backup
adb pull /sdcard/stock-boot.img/ [C:\KFHD8Backup]
adb pull /sdcard/stock-recovery.img/ [C:\KFHD8Backup]
adb pull /sdcard/stock-system.img/ [C:\KFHD8Backup]
but if I go into adb shell and type any commands, like just simple su:
I get /sbin/sh: su: not found
when I do whoami: I get root
but I get a funky prompt:
~#^[[61;5R
instead of a normal # root prompt.
So I'm kind of stuck because I can't really do anything without the su, and it says I'm root. So can I adb push over the files and mount the right drives or whatever to get it to recognize su. At that point I can install twrp, but i'm sure at that point my existing twrp will work too!
I can't seem to get it into fastboot mode either. When I adb devices it says I'm in recovery, not device and in TWRP it says no OS installed. So my only functioning loader is TWRP. (or however you put that more accurately).
I feel like with adb push working, I should be able to do something to get this back, but all the tools expect you to just push a button, not do it the hard way.
So long story short, if you can point me to a thread that tells me how to update TWRP or how to push SU over with ADB or anything that would be awesome. I"m not a complete turd at this, but I think I broke it using something like kingoroot instead of just using the bin4ry while I still had the cyanogenmod working somewhat. So I'm thinking that's why i got the funky prompt, and that's why my su is gone from where it should be.