Related
There's already a guide here for obtaining permanent root using VISIONary, but some folks in #G2ROOT are having issues with the way that VISIONary modifies parititons. Using rage directly is a bit cleaner, since you know exactly what it's going to touch at each step of the way. I did NOT come up with any of this on my own, I'm building completely off of work that others have done. Speaking of which-
None of this would be possible without the tireless work that scotty2 put in. He stayed with the project for well over a month, through lots of smashed hopes and dead ends, until the solution was finally found. Were it not for his work, as well as the help of a few other key folks- we wouldn't be here. He deserves our thanks and some donations! We're talking hundreds of hours of work here, a couple bucks is not too much for that. His paypal is:
[email protected]Send him some love! I'm not asking for anything myself, because I spent a half hour putting this together, and that doesn't deserve any donations!
[size=+2]G2 ROOT INSTRUCTIONS[/size]
=================================================
These are modified instructions based on the ones posted at http://bit.ly/g2root that use Visionary. A number of people have run into issues with the way that Visionary juggles around temporary partitions, and using the original root exploit is a much easier, and cleaner method for achieving permanent root. This tutorial will walk you through the rooting process by first achieving temporary root, and moving on to permanent root.
[size=+1]REQUIREMENTS[/size]
=================================================
Visionary disabled at boot or uninstalled completely
Android Terminal Emulator app
ADB
vision-combined-root.zip (Attached to this post, OR these two files: )
G2TempRoot.zip (http://forum.xda-developers.com/showthread.php?t=797042) NOTE: only download the files! Don't follow these instructions yet
vision-perm-root.zip (http://forum.xda-developers.com/showthread.php?t=833965) NOTE: again, just download the files from the thread.
In the commands to run below, $ or # represent the prompt and should NOT be entered as part of the commands.
[size=+2]VERY IMPORTANT![/size]Visionary has caused filesystem corruption for some users during the rooting process. Before attempting the instructions below, make sure that you have "auto run on boot" turned OFF, and reboot your system. Since you will not need visionary anyway after this, you might as well just uninstall visionary and reboot NOW before doing anything.
[size=+1]TEMP ROOT[/size]
=================================================
ON YOUR PC:
Unzip the G2TempRoot files to a folder. From a cmd window or terminal, navigate to that folder and execute these commands:
Code:
$ adb push su /sdcard/su
$ adb push Superuser.apk /sdcard/Superuser.apk
$ adb push rage /data/local/tmp/rage
$ adb push busybox /data/local/tmp/busybox
$ adb push root /data/local/tmp/root
$ adb shell chmod 0755 /data/local/tmp/*
ON YOUR PHONE:
Launch Terminal Emulator
/data/local/tmp/rage
Wait for the message: "Forked #### childs."
Menu > Reset Term - Terminal Emulator will exit.
Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell
**NOTE**: in the original directions from the XDA thread, you are instructed to run the /data/local/tmp/root script here. DON'T do this
just yet. Leave the terminal window open.
[size=+1]PERM ROOT[/size]
=================================================
ON YOUR PC:
unzip the vision-perm-root.zip and navigate to that folder. There will be four files. You will need to push two of these to your phone- hboot-eng.img, and one of the wpthis-[..].ko files.
If you HAVE applied the OTA update, push wpthis-OTA.ko.
If you HAVE NOT applied the OTA update, push wpthis-pre-OTA.ko.
Code:
$ adb push hboot-eng.img /data/local
$ adb push wpthis-OTA.ko /data/local
ON YOUR PHONE:
You should still have terminal emulator up, at a root prompt. Now run:
Code:
# insmod /data/local/wpthis-OTA.ko
You should see:
Code:
init_module 'wpthis-OTA.ko' failed (Function not implemented)
That means it worked. This next step is CRUCIAL. You must make sure that you are writing to the proper partition here or you could brick your phone. To be absolutely clear- the partition is mmcblk(zero)p(one)(eight)
Code:
dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
You should see some messages indicating that it was written. Next, run:
Code:
# /data/local/tmp/root
This will lock in root, and give you 'su' access in the future. Next, run:
Code:
# sync
Now wait at least a minute, just to be safe. After waiting, reboot your phone using the power button. After it finishes starting up, launch the terminal emulator, and type 'su'. You should get the prompt asking you to grant permissions. If you got the prompt, congratulations! You have permanent root!
I used these instructions and they worked brilliantly.
Sounds like it's a little safer than using VISIONary, which some people in the thread are reporting can get confused and not let you root because it thinks you already have root, etc.
I love it when a plan comes together. Perma-root. thanks man, i never had much luck getting visonary to work so this was spot on. worked like a charm
*not smart enough*
*leaves thread*
I really try to leave ADB out of the equation since I'm not comfortable navigating it.... I suppose I could dedicate my time to learning it, but it's not worth it since I would only use it once every two years to root my phone. In 16 hours I'm sure there will probably be a one click perm root method out anyway.
It worked flawlessly!
I always get so stressed when I root my phones, especially without tutorial vids.
I first did my G1 and that worked perfectly fine.
My second attempt at rooting was with my MT3G and that resulted in a bricked device because one of the lines of code was incorrect in the thread.
This, however, was clearly and plainly spelled out exactly to what happened to my phone.
I give you my thanks.
Awesome- glad to hear it's working well for people. If anybody sees areas that I could improve in the description just let me know.
sinistersai4d4d said:
I really try to leave ADB out of the equation since I'm not comfortable navigating it....
Click to expand...
Click to collapse
ADB is worth it IMHO because it makes moving files around easy, whether you're rooted or not. You don't have to turn on SD card storage, you can just do adb pull/push etc to grab or put files when you need them. Worth the effort. The one click root should be out within the next couple days though, you are right about that one.
trigeek,
I already perm rooted earlier, but just wanted to say you gave a very nicely detailed explanation that anyone should be able to follow. Well done!
Great guide. I liked it a lot more than Unforgivens just because it doesn't rely on VisionARY which might mess things up.
Guide worked absolutely great, no problems. I did not try the visionary method first, but for some reason I just felt safer doing it in adb.
Thank you!
Sorry for the noob question...? but does this mean we have fully rooted to G2 and now we can load ROMS on it when they come out ????
Edit: Nevermind I didnt see the sticky
RaffieKol said:
Sorry for the noob question...? but does this mean we have fully rooted to G2 and now we can load ROMS on it when they come out ????
Click to expand...
Click to collapse
You got it!
RaffieKol said:
Sorry for the noob question...? but does this mean we have fully rooted to G2 and now we can load ROMS on it when they come out ????
Edit: Nevermind I didnt see the sticky
Click to expand...
Click to collapse
Custome ROMs, custom Recovery...the whole 9 yards
Thanks for posting this, it was so easy!
Thank you so very much it was a success
this is my first rooting on an android device... im freaking out... but here i go.... if something happens i will just report my phone lost and get a new one i guess ahahah still... im scared.
Issues
I was temp rooted before using rage and then thru Visionary. But I decided to go back to stock till we have permanent root. I perm rooted today using this method. But I'm having the following issues:
1) adb remount
- remount failed: Operation not permitted
2) when using Root Explorer in /system, toggling Mount R/W does not work
- the only way to mount it R/O is thru terminal/adb shell. Once mounted R/O, the only way to mount R/W again is thru a reboot. Issuing mount -o remount ro /system either in terminal or adb shell does not work.
i actually changed my mind... im going to wait for a one click untended root i guess.... to scary...
joackie27 said:
I was temp rooted before using rage and then thru Visionary. But I decided to go back to stock till we have permanent root. I perm rooted today using this method. But I'm having the following issues:
1) adb remount
- remount failed: Operation not permitted
2) when using Root Explorer in /system, toggling Mount R/W does not work
- the only way to mount it R/O is thru terminal/adb shell. Once mounted R/O, the only way to mount R/W again is thru a reboot. Issuing mount -o remount ro /system either in terminal or adb shell does not work.
Click to expand...
Click to collapse
make sure you have debugging enabled.
juanshop said:
i actually changed my mind... im going to wait for a one click untended root i guess.... to scary...
Click to expand...
Click to collapse
Not gonna happen.
then i guess.... im going to jump in it.... wish me luck...
So after 7 attempts, i decided i should seek help.
I've been trying to root my g2 using VISIONary r14.
1. I installed visionary r14 [i have usb debugging on] i leave all the check boxes unchecked and hit temp root
2. after temp root is finished, i hit attempt perm root.
phone reboots. i see superuser permission in the app drawer, all seems to be
fine.
3. Now I plug my phone to my PC via usb [i have the androidSDK and all drivers installed properly]
i change directory to C:\AndroidSDK\tools\
check adb devices and my device is listed.
then i shoot the following commands
adb push wpthis-OTA.ko /data/local/wpthis-OTA.ko
adb push hboot_7230_0.84.2000_100908.nb0/data/local/hboot_7230_0.84.2000_100908.nb0
adb shell
su
and this returns permission denied.
Ive searched everywhere and everyone says when the superuser prompt shows up check "Remember" and click yes. However this does not show up for me, at all.
I even go into terminal and try it, terminal also gives me 'Permission Denied'
any help anyone?
I'd just do it using the rage method. You obviously understand how to use some simple commands in adb, it's just that there's a few (read: not many) more. It's stickied in the development section.
Sent from my T-Mobile G2 running Cyanogenmod.
Yes rage way is the way to go. I think its a total of about 4 lines you need to enter
Sent from my HTC Vision using XDA App
yeah i ended up using the rage method, it was a lot easier than i thought it would be.
I did it using visionary r13 and terminal emulator. No pc. Go to youtube look up Blackprince310 he made a video on it. If it it doesn't work try permroot option on r13.
Sent from my T-Mobile G2 using XDA App
I would love to go the rage way, but I cannot get any permissions to do so...
Visionary r14 gives me a parsing error and does not install....
I've spent about 8 hours today trying to get this done!!! sigh!
Crey23 said:
I would love to go the rage way, but I cannot get any permissions to do so...
Visionary r14 gives me a parsing error and does not install....
I've spent about 8 hours today trying to get this done!!! sigh!
Click to expand...
Click to collapse
What steps have you taken? The rage way does not require visionary at all.
Sent from my HTC Vision using XDA App
shortlived said:
What steps have you taken? The rage way does not require visionary at all.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
right!!! I've been sitting at my pc for about 8 or 9 hours trying to root.
I continue to get adb: permission denied message no matter what I try. I follwed the adb for dummies guide that didnt work. I tried the VISONary r14 apk, I can't even open it.....
I'm beggining to wonder if I should run recovery first, get back to stock, and then try to root....how will that affect all my apps? Will it work?
Well you can always back them up with titanium backup. But yea i think you should do a factory reset then try the rage method. Follow the guide word for word. If you still got problems post em here i will try to help as much as i can. The whole process should take around 5min.
Sent from my HTC Vision using XDA App
I dont know how to link to a post with the xda app so here is the guide quoted
trigeek said:
There's already a guide here for obtaining permanent root using VISIONary, but some folks in #G2ROOT are having issues with the way that VISIONary modifies parititons. Using rage directly is a bit cleaner, since you know exactly what it's going to touch at each step of the way. I did NOT come up with any of this on my own, I'm building completely off of work that others have done. Speaking of which-
None of this would be possible without the tireless work that scotty2 put in. He stayed with the project for well over a month, through lots of smashed hopes and dead ends, until the solution was finally found. Were it not for his work, as well as the help of a few other key folks- we wouldn't be here. He deserves our thanks and some donations! We're talking hundreds of hours of work here, a couple bucks is not too much for that. His paypal is:
[email protected]Send him some love! I'm not asking for anything myself, because I spent a half hour putting this together, and that doesn't deserve any donations!
[size=+2]G2 ROOT INSTRUCTIONS[/size]
=================================================
These are modified instructions based on the ones posted at http://bit.ly/g2root that use Visionary. A number of people have run into issues with the way that Visionary juggles around temporary partitions, and using the original root exploit is a much easier, and cleaner method for achieving permanent root. This tutorial will walk you through the rooting process by first achieving temporary root, and moving on to permanent root.
[size=+1]REQUIREMENTS[/size]
=================================================
Visionary disabled at boot or uninstalled completely
Android Terminal Emulator app
ADB
vision-combined-root.zip (Attached to this post, OR these two files: )
G2TempRoot.zip (http://forum.xda-developers.com/showthread.php?t=797042) NOTE: only download the files! Don't follow these instructions yet
vision-perm-root.zip (http://forum.xda-developers.com/showthread.php?t=833965) NOTE: again, just download the files from the thread.
In the commands to run below, $ or # represent the prompt and should NOT be entered as part of the commands.
[size=+2]VERY IMPORTANT![/size]Visionary has caused filesystem corruption for some users during the rooting process. Before attempting the instructions below, make sure that you have "auto run on boot" turned OFF, and reboot your system. Since you will not need visionary anyway after this, you might as well just uninstall visionary and reboot NOW before doing anything.
[size=+1]TEMP ROOT[/size]
=================================================
ON YOUR PC:
Unzip the G2TempRoot files to a folder. From a cmd window or terminal, navigate to that folder and execute these commands:
Code:
$ adb push su /sdcard/su
$ adb push Superuser.apk /sdcard/Superuser.apk
$ adb push rage /data/local/tmp/rage
$ adb push busybox /data/local/tmp/busybox
$ adb push root /data/local/tmp/root
$ adb shell chmod 0755 /data/local/tmp/*
ON YOUR PHONE:
Launch Terminal Emulator
/data/local/tmp/rage
Wait for the message: "Forked #### childs."
Menu > Reset Term - Terminal Emulator will exit.
Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell
**NOTE**: in the original directions from the XDA thread, you are instructed to run the /data/local/tmp/root script here. DON'T do this
just yet. Leave the terminal window open.
[size=+1]PERM ROOT[/size]
=================================================
ON YOUR PC:
unzip the vision-perm-root.zip and navigate to that folder. There will be four files. You will need to push two of these to your phone- hboot-eng.img, and one of the wpthis-[..].ko files.
If you HAVE applied the OTA update, push wpthis-OTA.ko.
If you HAVE NOT applied the OTA update, push wpthis-pre-OTA.ko.
Code:
$ adb push hboot-eng.img /data/local
$ adb push wpthis-OTA.ko /data/local
ON YOUR PHONE:
You should still have terminal emulator up, at a root prompt. Now run:
Code:
# insmod /data/local/wpthis-OTA.ko
You should see:
Code:
init_module 'wpthis-OTA.ko' failed (Function not implemented)
That means it worked. This next step is CRUCIAL. You must make sure that you are writing to the proper partition here or you could brick your phone. To be absolutely clear- the partition is mmcblk(zero)p(one)(eight)
Code:
dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
You should see some messages indicating that it was written. Next, run:
Code:
# /data/local/tmp/root
This will lock in root, and give you 'su' access in the future. Next, run:
Code:
# sync
Now wait at least a minute, just to be safe. After waiting, reboot your phone using the power button. After it finishes starting up, launch the terminal emulator, and type 'su'. You should get the prompt asking you to grant permissions. If you got the prompt, congratulations! You have permanent root!
Click to expand...
Click to collapse
Sent from my HTC Vision using XDA App
Sent from my HTC Vision using XDA App
i need help, i perm rooted my phone now it got stuck at the HTC start up! what should i do?? pls reply ASAP!
So I'm trying to get into su to run gfree_verify to make sure my permaroot S-off/SIM card unlock/SuperCID was successful, but I'm getting a permission denied error.
What happens is, I type adb shell, then I type su, there's a really long delay, then it tells me Permission Denied. However, when I run the Terminal Emulator from my phone and type in the su command, I get root access just fine.
I used the "official" method that is on the HTC Vision Wiki that is located here. The only thing, however, is that my Android SDK install wasn't installed using any type of installer. I just extracted a zip file and shoved it in a random folder. I did make sure to run the Command Prompt as Administrator before issuing the adb shell command, but I'm still unable to get superuser access through the PC. Trying to use the adb root command gives me an "adbd cannot run as root in production builds" error.
Did I do something incorrectly?
adb kill-server
adb start-server
See if that works. If not, try rebooting your computer.
Sent from a Western Union telegram.
Does the Superuser app seem to be installed correctly on your phone ?
Do you have the output from gfree ? I wonder if it didn't work correctly with your kernel, it doesn't work with all kernels. What ROM/kernel do you have ?
Which procedure did you use, the one in the Wiki, or one involving dd'ing the eng hboot ?
steviewevie said:
Does the Superuser app seem to be installed correctly on your phone ?
Do you have the output from gfree ? I wonder if it didn't work correctly with your kernel, it doesn't work with all kernels. What ROM/kernel do you have ?
Which procedure did you use, the one in the Wiki, or one involving dd'ing the eng hboot ?
Click to expand...
Click to collapse
I rebooted the daemeon, computer, and also the phone. No dice.
The Superuser app is correctly installed. When I ran Adfree and attempted to go into SU in Terminal, I got the usual Allow Superuser access dialog. Both worked without any problems; like I said, I can get root access from the on-the-phone terminal, it's when I attempted to get root access from the adb shell command on my computer where I have problems.
No special ROMs, completely stock post-November OTA update. The only thing I flashed after permarooting was the Clockwork Recovery mod, but adb shell SU wasn't working before this. I initially used some outdated instructions (involving the use of the dd command, and the wpathis.ko or something). I read some more and learned these were out of dated, so I unrooted. I then used the instructions that are on the wiki using gfree to permroot.
gfree_verify works without any problems if I run it from the Terminal Emulator on my phone. Returns the proper values to indicate I'm SIM Unlocked, SuperCID, and S-off. I'm glad it works, but I still don't like the fact I can't use the adb shell. Typing characters on the G2 is a pain in the ass.
I still want to know why I can't enter superuser from the PC adb shell. Am I doing something incorrectly?
Thanks a lot for your help!
Try clearing data for the SuperUser app?
go in your recovery screen from boot, select your mount options, and mount everything lol. Not sure if it'll fix it but everytime I have adb permission issues that seems to fix it and I don't think it could hurt.
dietotherhythm said:
go in your recovery screen from boot, select your mount options, and mount everything lol. Not sure if it'll fix it but everytime I have adb permission issues that seems to fix it and I don't think it could hurt.
Click to expand...
Click to collapse
This worked perfectly! When I entered su from the command prompt, the SuperUser app popped up on the phone's side and I hit allow. It then let me through.
What exactly was broken though? Why did mounting everything from the Clockwork Recovery menu fix this?
I can't find a solution to this from searching the forums so i'm just gonna ask.
I'm using the gfree method via adb. i'm getting all the way through it without any problems untill i get to the "lock in" root section.
I get the error message that the wiki says should get and then ignore, but i also get another message that says something like
"cp: can't stat '/sdcard/su' : no such file or directory"
any help with this would be appreciated.
also, are all the bad things i've heard about visionary true? should i go ahead and root with visionary, or keep trying this way? thanks
I just checked and it says I'm s-off. I'm very confused.
Sent from my T-Mobile G2 using XDA App
Well first ill tell u Visionary worked for me in like 10 minutes time. Very easy n very fast. Not true what they say. If u got s-off, good. Ur almost there. Have to check out gfree method quik in order to help u. Hold up
G2 with ExtraHotSauce v0.2!!
What guide are you using, the one on the Wiki doesn't have you copy (cp) anything.
is this the command where you run into the problem?
/data/local/tmp/root
Click to expand...
Click to collapse
This is running a script to lock in root, you already ran gfree while you were temp rooted so that's why you are S-OFF.
Do you have the "su" file on the root of your SD card?
You should be able to retry everything but the gfree part.
As for Visionary, some people report success but other have reported big problems. I found the gfree method to work pretty well, even though I used Visionary when I was temp-rooting (when I just got my phone) when I permarooted I used the gfree method.
raitchison said:
What guide are you using, the one on the Wiki doesn't have you copy (cp) anything.
is this the command where you run into the problem?
This is running a script to lock in root, you already ran gfree while you were temp rooted so that's why you are S-OFF.
Do you have the "su" file on the root of your SD card?
You should be able to retry everything but the gfree part.
As for Visionary, some people report success but other have reported big problems. I found the gfree method to work pretty well, even though I used Visionary when I was temp-rooting (when I just got my phone) when I permarooted I used the gfree method.
Click to expand...
Click to collapse
yes, that is the command that is giving me problems. i checked my sd card and superuser.apk is at the root of it.
when you say retry everything what exactly would i retry? i'm at work, and don't have access to adb. do i need adb to "retry"
so, there are two different guides that perm root. the first is the wiki and this is the one that i was following. the other has almost the exact same steps except it has the wpthis file. i guess when i get home i'll try the other method and see if it works. thanks for everone's help
no its a 2 step procedure maybe you should go ahead and unroot and s-on then go ahead and re root. if not you can still re run everything start off with temp root then go ahead and lock in the perma root
thenaut said:
yes, that is the command that is giving me problems. i checked my sd card and superuser.apk is at the root of it.
when you say retry everything what exactly would i retry? i'm at work, and don't have access to adb. do i need adb to "retry"
Click to expand...
Click to collapse
You should have both Superuser.apk and su on the root of your SD card. Either push it from your computer again (first command in the wiki):
Code:
adb push su /sdcard/su
Or just copy it to your SD card (be sure to unmount the card when done). Then re-run the root script in terminal.
that totally did it. I pushed the su file and re ran the script and i got root. it's wierd because i thought i pushed it the first time but i guess not. anyway, thanks
About 3 hours ago, I won a Desire Z (wheeey!) at the HTC London meetup. Naturally, I came straight here after the help I got in January rooting my Desire.
I used the Visionary method and obtained temp root status, and then attempted perm root, which seemed to work. All of the guides I have read include a bunch of steps after this, one of which included deleting Visionary, which I then did. I just turned the phone off, took the battery out for a bit and then turned it back on. I still have the Superuser icon and the Terminal Emulator indicates that I have root access... is that it then? It's that simple?
Please tell me if I've done anything wrong, as I don't want to flash Cyanogen and Clockwork Recovery if it's all going to go to hell on me. Any advice or confirmation on whether or not I've obtained perm root would be lovely.
Oh, my firmware version is 1.34.405... etc. Is this simply the last version which allows for such easy root?
Arconaught said:
About 3 hours ago, I won a Desire Z (wheeey!) at the HTC London meetup. Naturally, I came straight here after the help I got in January rooting my Desire.
I used the Visionary method and obtained temp root status, and then attempted perm root, which seemed to work. All of the guides I have read include a bunch of steps after this, one of which included deleting Visionary, which I then did. I just turned the phone off, took the battery out for a bit and then turned it back on. I still have the Superuser icon and the Terminal Emulator indicates that I have root access... is that it then? It's that simple?
Please tell me if I've done anything wrong, as I don't want to flash Cyanogen and Clockwork Recovery if it's all going to go to hell on me. Any advice or confirmation on whether or not I've obtained perm root would be lovely.
Oh, my firmware version is 1.34.405... etc. Is this simply the last version which allows for such easy root?
Click to expand...
Click to collapse
Having the SuperUser icon just means the app is installed, open up terminal and type 'su' to see if it throws up any errors
Sent from my HTC Vision using XDA App
I should have mentioned that I did that and got the # symbol, am I good to go?
Arconaught said:
I should have mentioned that I did that and got the # symbol, am I good to go?
Click to expand...
Click to collapse
In theory, yes; in practice, no. Visionary (with the G2/Desire Z, at least) is known to be a bit buggy. You shouldn't have any issues installing custom ROMs but, I would recommend using the wiki method to root.
Sent from my HTC Vision using XDA App
OriginalGabriel said:
In theory, yes; in practice, no. Visionary (with the G2/Desire Z, at least) is known to be a bit buggy. You shouldn't have any issues installing custom ROMs but, I would recommend using the wiki method to root.
Click to expand...
Click to collapse
My understanding, if he already used Visionary to root, and it worked than he should be good to go. Either it works, or it doesn't. The risk with Visionary is that it sometimes corrupts some partitions, which causes the phone to not boot. I haven't read any conclusive reports on Visionary causing long term issues (correct me if I'm wrong).
redpoint73 said:
My understanding, if he already used Visionary to root, and it worked than he should be good to go. Either it works, or it doesn't. The risk with Visionary is that it sometimes corrupts some partitions, which causes the phone to not boot. I haven't read any conclusive reports on Visionary causing long term issues (correct me if I'm wrong).
Click to expand...
Click to collapse
This is my understanding as well, though I'd probably still use GFREE to get S-OFF if I were OP.
That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.
Arconaught said:
That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.
Click to expand...
Click to collapse
I used the wiki method myself, those that used other methods (like Visionary) and were told to root via the wiki seem to have all just started at the beginning, from what I've read.
Sent from my HTC Vision using XDA App
Arconaught said:
That's my next question, I'm using this guide ( http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_G2 ) to try and get S-Off to flash Cyanogen and I'm wondering what step to start on, assuming from your replies that I'm rooted already.
I know it's a bit of a dumb question, but I just don't wanna fudge my new phone.
Click to expand...
Click to collapse
Whoa the Wiki method is completely different, looks like it was rewritten on 04/01.
You can completely ignore the temp rooting steps and concentrate on the gfree steps
From the "Necessary Files" section you need gfree, flash_image and ClockWorkMod Recovery
I would use the latest ClockWorkMod recovery rather than the one listed on the Wiki:
http://mirrorbrain.cyanogenmod.com/cm/recoveries/recovery-clockwork-3.0.2.4-vision.img (of course it's only the latest as of the time of this writing)
From step 2 you need to use:
Code:
$ adb push gfree /data/local/tmp/
$ adb push flash_image /data/local/tmp/
From step 2.a you need to use:
Code:
$ adb push recovery-clockwork-3.0.2.4-vision.img /data/local/tmp/recovery.img
Again note that the file name for CWM will depend on the version of CWM you are using.
Skip to step 4.b you need to use:
Code:
# cd /data/local/tmp
# ./gfree -f
# ./flash_image recovery recovery.img
# sync
Continue on as normal from here.
I skipped the temp root and perm root sections as you are already perm root.
I also skipped the ENG HBOOT parts, since that's not strictly necessary and the most risky part of the whole process (one mistake can result in a brick). If you want to flash the ENG HBOOT you would need to follow steps 4.a instead of 4.b, (you would also need the necessary HBOOT of course) the only command you need to omit from 4.a or 4.b is "# ./root_psn" which is the script which establishes permanent root.
Thanks a lot so far man, but I'm still stuck. I have adb, when I open it in the SDK, it flows for a bit, then closes. This is right, right? I'm meant to do all of these prompts via the cmd window?
OK, I've now sorted adb, but I can't get anything to work past that. Nothing will transfer to my phone and I'm going to kill... somebody.
Arconaught said:
OK, I've now sorted adb, but I can't get anything to work past that. Nothing will transfer to my phone and I'm going to kill... somebody.
Click to expand...
Click to collapse
You say you've sorted adb, but can you be more specific please ? What works and what doesn't work exactly ?
Ah, yeah, sorry. I got to the point where when I type in "adb devices" in the command window, it shows me my phone, with the serial number and whatnot. However, whenever i try the command:
$ adb push gfree /data/local/tmp/
It just won't work. I have all the files together in my desktop at the moment, having moved them from the downloads folder on my laptop. Is there a specific place I should have the stuff I need to send to my phone?
There is a great write up here about getting adb working. It sounds like either you didn't set up a "path" to use those commands anywhere or if you don't want to do that make sure your files are in the same folder as your adb.
Sent from my HTC Vision using XDA App
Arconaught said:
Ah, yeah, sorry. I got to the point where when I type in "adb devices" in the command window, it shows me my phone, with the serial number and whatnot. However, whenever i try the command:
$ adb push gfree /data/local/tmp/
It just won't work. I have all the files together in my desktop at the moment, having moved them from the downloads folder on my laptop. Is there a specific place I should have the stuff I need to send to my phone?
Click to expand...
Click to collapse
You need to have the files (extracted from the ZIP files you downloaded) in the same folder you run the ADB commands, if your ADB is in your path you should be able to run ADB commands from any folder.
To summarize you need to extract all the zips you downloaded under necessary files, all to the same folder. The open a command prompt and CD to that folder before you start using your adb push commands.
shortlived said:
There is a great write up here about getting adb working.
Click to expand...
Click to collapse
Yeah, steviewevie wrote it:
http://forum.xda-developers.com/showthread.php?t=865685
But it looks like he is willing to give the OP some personalized help.
Right, thanks guys, I think I'm making some progress.
ADB is all set up, and as far as I'm aware, having:
program files > android sdk > platform tools
on my path should mean I can open adb from anywhere right? I have all of the extracted files in platform tools, where adb is, in my program files... is this right, or have I completely missed the point here?
I keep getting "cannot stat 'gfree':: No such file or directory"
Sorry, I seem really stupid concerning this whole thing, but I'm sure it's something equally obvious that I'm just not seeing.
New problem. I worked out what I'd done wrong there, and got everything onto my phone. However, when trying to change the directory to /data/local/tmp, I keep getting "The system cannot find the path specified"
Now what am I doing wrong?
Arconaught said:
New problem. I worked out what I'd done wrong there, and got everything onto my phone. However, when trying to change the directory to /data/local/tmp, I keep getting "The system cannot find the path specified"
Now what am I doing wrong?
Click to expand...
Click to collapse
Remember you are running those commands (everything in that section) from an ADB shell, not from the Windows command prompt.
Excuse my ignorance, but what exactly do you mean by that? What should I do?