Hey, guys. I just got bricked my phone and I can not find any solution. My vol + buttno seems not to be working and the vol- button is working from time to time. The phone was with CM 12 Lillipop and I git update but I didn't like it. So I did not wiped everything before to flash it back with the original ROM (CM12) so I got bootloop of android logo. Is there any way to put it into recovery mode or something without vol + /I could make vol- to work somehow/? Please, I heed help!
Can you go to fast boot? (Vol up plus power) if yes then flash SOLID KERNEL V1.6 GPROJ through fastboot... It might work, else flash a stock kdz
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
MZ_. said:
Can you go to fast boot? (Vol up plus power) if yes then flash SOLID KERNEL V1.6 GPROJ through fastboot... It might work, else flash a stock kdz
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
Click to expand...
Click to collapse
No, it's just volume up is not working anymore. Volume down works sometimes though.
Thank you anyway. If there's other way...
Come on guys, I am begging you. If someone know a tool or something to fix my phone, I would be very thankful...
Sent from my GT-P3110 using XDA Free mobile app
Bro calm down! Just download tools and flash stock kdz
First hold both volume down buttons and connect your phone to PC with cable while holding both volume buttons. Does download mode appear? If it does then flashing stock kdz will get your phone back!
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
As I said before, my volume buttons are not working properly. That's the reason I made this thread- to find out if I can save my phone or not. I already tried flashing with kdz, but I can not boot the phone in any mode but bootloop CM lollipop logo. Also I can not install MTP on PC as it seems to be the problem when I tried with adb command prompt.
So, is there any other way except repair service for the volume buttons?
Sent from my GT-P3110 using XDA Free mobile app
Aah I got your problem. You have bootloader unlocked? To flash kdz you need a locked bootloader. Try locking it somehow (kinda impossible if you can't boot :/ ). Once you flash stock recovery and lock bootloader then you'll be able to flash kdz! I think you need to go to repair shop to fix buttons
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
MZ_. said:
Aah I got your problem. You have bootloader unlocked? To flash kdz you need a locked bootloader. Try locking it somehow (kinda impossible if you can't boot :/ ). Once you flash stock recovery and lock bootloader then you'll be able to flash kdz! I think you need to go to repair shop to fix buttons
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
Click to expand...
Click to collapse
By the way, I did installed a custom recovery via FreeGee. Since then when I reboot the phone, it shows Google and a locked locker at the bottom. It could mean locked bootloader, right? Also I have backup and all the files i need in there, but the problem is I can not reach them. Tomorrow I am going to talk to the service. I hope there's a hope
Anyway, thank you again, @MZ_
If anyone else has something in mind, please - I am opened for suggestions
Well yes it means a locked bootloader. If you could go to fastboot you could try fastboot oem unlock command. As the mako boot loader is nexus based ... Just a thought. Can you get a temp fix your vol up button? Any hard thing which presses button? :/
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
Press THANKS if I help
PharrellVP said:
By the way, I did installed a custom recovery via FreeGee. Since then when I reboot the phone, it shows Google and a locked locker at the bottom. It could mean locked bootloader, right? Also I have backup and all the files i need in there, but the problem is I can not reach them. Tomorrow I am going to talk to the service. I hope there's a hope
Anyway, thank you again, @MZ_
If anyone else has something in mind, please - I am opened for suggestions
Click to expand...
Click to collapse
locked or unlocked BL has nothing to do with the download mode. You have to take your device to download mode using some commands from PC. search for this. I think this sould work: adb reboot download
akahroba said:
locked or unlocked BL has nothing to do with the download mode. You have to take your device to download mode using some commands from PC. search for this. I think this sould work: adb reboot download
Click to expand...
Click to collapse
Dude he can't connect with ADB! Please readout the post first! He is in a softbricked state. He has recovery but his keys are damaged. I think the bootloader is locked that's why it isn't booting up (maybe) ... Or the ROM is damaged. Anyways he can't do anything till he fixes both the volume buttons!
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
/EDIT: adb reboot download isn't anything
Press THANKS if I help
Yeah, @MZ_. I am not able to do anything like this. I tried adb, but it said no device found. I took the phone to the service today so I am waiting for respond. Once again, thank you all for the suggestions. ROM is not corrupted. It is cm 12 working perfect, but when I updated it there was lots of lagg. So I did the mistake just to wipe cache and dalvik before to reflash the original ROM. So that's how I got bricked my phone. So now I am gonna wait hopefully for good ):
Sent from my GT-P3110 using XDA Free mobile app
PharrellVP said:
Yeah, @MZ_. I am not able to do anything like this. I tried adb, but it said no device found. I took the phone to the service today so I am waiting for respond. Once again, thank you all for the suggestions. ROM is not corrupted. It is cm 12 working perfect, but when I updated it there was lots of lagg. So I did the mistake just to wipe cache and dalvik before to reflash the original ROM. So that's how I got bricked my phone. So now I am gonna wait hopefully for good ):
Sent from my GT-P3110 using XDA Free mobile app
Click to expand...
Click to collapse
Well, it can't be bricked like that btw, and yeah! You need to fix your buttons in order to continue. Else use a hard thing to press them tightly so it work! Sorry
Press THANKS if I helped
Guys, I have news. The service fixed the buttons so now works like charm. So back to the business-can I do a full wipe then install the rom or I have to use kdz or so? I mean it boots into download and recovery mode.
Thanks.
Sent from my GT-I9300 using XDA Free mobile app
PharrellVP said:
Guys, I have news. The service fixed the buttons so now works like charm. So back to the business-can I do a full wipe then install the rom or I have to use kdz or so? I mean it boots into download and recovery mode.
Thanks.
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Well, yes you can now... I'd recommend you go for CM11 ... I'm really happy that it worked out :>
Hit THANKS if I help, or you like my post!
Hm, I thought the recovery is OK, but it is not. Only the download mode is working. What's now? Please, I need it urgently...
Sent from my GT-I9300 using XDA Free mobile app
I flashes stock with kdz then I did reboot into recovery. Then I just wiped everything, flashed back cm12 with gapps and now it works perfect.
Sent from my GT-I9300 using XDA Free mobile app
PharrellVP said:
Hey, guys. I just got bricked my phone and I can not find any solution. My vol + buttno seems not to be working and the vol- button is working from time to time. The phone was with CM 12 Lillipop and I git update but I didn't like it. So I did not wiped everything before to flash it back with the original ROM (CM12) so I got bootloop of android logo. Is there any way to put it into recovery mode or something without vol + /I could make vol- to work somehow/? Please, I heed help!
Click to expand...
Click to collapse
Along the way you need to flash through the programming (via JTAG), died loader ...
Mr.MEX said:
Along the way you need to flash through the programming (via JTAG), died loader ...
Click to expand...
Click to collapse
It is already solved. Please do not bump old threads.
Sent from my LG-E975 Int'l
Related
Hey peeps - another annoying n00b question (sorry)
I have the Doom v3 kernel and stock 2.3.3
Just want to know how I can boot into recovery so I can install a ROM zip?
I have tried every combination of buttons on startup including Power then tapping and holding Back and I cant get into recovery mode.
Please help i really want to try the GingerStation rom
Turn device off. When off press the power button once, then start tapping any hardware button untill device boots into recovery. You can also try doomlords xCharge app from the market.
Sorry i havent been very active in the forums recently. I will be updating rom soon with some cool features and a new name
Sent from my R800i using Tapatalk
I have tried xCharge, all it does is reboots the phone
Sent from my R800i using xda premium
Simmo3D said:
I have tried xCharge, all it does is reboots the phone
Sent from my R800i using xda premium
Click to expand...
Click to collapse
You have to turn the phone on, when you see the first image of the android on the screen keep tapping the back button, you will get in trust me I had the same problem
Simmo3D said:
I have tried xCharge, all it does is reboots the phone
Sent from my R800i using xda premium
Click to expand...
Click to collapse
AFAIK you have to boot into recovery the standard way. Like the person above described. Once you do that CWM creates a directory in /cache called "recovery" then xCharge works fine
OmG it worked.. thanks alot guys!!
Sent from my GT-I9100 using xda premium
hi guys having same problem everything installed ok but wont boot into recovery either way any ideas
brockyneo said:
hi guys having same problem everything installed ok but wont boot into recovery either way any ideas
Click to expand...
Click to collapse
Did you try everything from this thread?
eg. Pushing back/wolume button (or maybe other) when the led lights.
If yes. Try get to it using command or reflash boot.img
Sent using r800i with DoomKernel v10 (1.21ghz)
I have a stock Play, but I'm not good to reboot into recovery....
akira.pwr said:
I have a stock Play, but I'm not good to reboot into recovery....
Click to expand...
Click to collapse
Have you installed CWM?
No, I don't know how to do it...
akira.pwr said:
No, I don't know how to do it...
Click to expand...
Click to collapse
Are you rooted?
If not, do you know how to do that?
No, it's completely stock, I've read I have to flash a file in recovery, I've got it, but I don't know how to reboot in recovery with button combination.
To get cwm, root using doomlords easy toolkit, search development
Then install this app and click install: https://play.google.com/store/apps/details?id=com.pvy.CWMinstaler
After you have installed that, boot on your phone, and when you see the sony ericsson screen, repeatedly tap volume down until you get into cwm
WOW! It's very easy this way, thanks a lot
Another quick question, now bootloader is unlocked?
Can I flash any custom roms like any other device? (flash in recovery mode)
Thanks again.
That way i showed is to install CWM with a LOCKED bootloader.
This will allow you to flash STOCK based roms, no others
This is not unlocking bootloader, just getting CWM
If you want to unlock your bootloader, you have to go to the sony website or pay to unlock it
Oh, so I can't flash CM roms, but I can with stock based, right?
I knew about Sony website, but I though there was other ways to have the bootloader unlocked.
Well, thank you a lot, now I have to find a good stock based rom.
akira.pwr said:
Oh, so I can't flash CM roms, but I can with stock based, right?
I knew about Sony website, but I though there was other ways to have the bootloader unlocked.
Well, thank you a lot, now I have to find a good stock based rom.
Click to expand...
Click to collapse
Yeah!
Before anything, make a nandroid backup!
I have to upgrade to latest fw with flashtool (in Italy we haven't), I'm learning all this night, but most of work is done thanks to you.
akira.pwr said:
I have to upgrade to latest fw with flashtool (in Italy we haven't), I'm learning all this night, but most of work is done thanks to you.
Click to expand...
Click to collapse
Happy to help
So I bought myself a Galaxy Nexus from Ebay and it arrived today.
The problem with it is, that the seller told me he did an OTA Update that in the end causes endless Bootloops.
I thought to myself that this should be easy to solve by just flashing a custom rom but I don't even get to the Bootloader.
Whenever I press Volume Up + Down + Power the Google logo appears without vibrating or anything.
Then it goes on to the Nexus Bootscreen till it just restarts.
Any Ideas?
Does adb recognizes your de vice?
Sent from my Galaxy Nexus using xda app-developers app
Isn't it necessary to be able to boot to check that?
So it looks like my phone is soft bricked.
There's still the problem that I'm unable to get into the bootloader aswell as into download mode.
I also already tried the OMAP flash tool.
domimatik said:
Isn't it necessary to be able to boot to check that?
Click to expand...
Click to collapse
I got into a bootloop once and i could access adb.... maybe you can try...
Sent from my Galaxy Nexus using xda app-developers app
I sadly can't access ADB either. Bought myself a USB-Jig.
Anyone got experience in these kinda things?
domimatik said:
I sadly can't access ADB either. Bought myself a USB-Jig.
Anyone got experience in these kinda things?
Click to expand...
Click to collapse
It will get you into Odin mode similar to pressing Vol down + Power, then you can use Odin to flash a new firmware which is very dangerous and could brick your device if done wrong
DynamicRam said:
It will get you into Odin mode similar to pressing Vol down + Power, then you can use Odin to flash a new firmware which is very dangerous and could brick your device if done wrong
Click to expand...
Click to collapse
Yes... USB jig should do the trick.
Sent from my Galaxy Nexus using xda app-developers app
Successfully flashed a new rom on my nexus via Odin but I'm still unable to get into fastboot/bootloader.
Bootloop also occures whenever I start the device
I just got my S4 19505
I rooted it, Installed CWM,Did a backup and tried to install CM kitkat.
Got a dead phone.
Read Here and installed stock firmware.
After boot I'm in gaps process crash loop.
I can't follow any advice in forums, because of the crash notification I can't change nothing in my phone settings.
I can't wipe data because from some reason I can't boot to recovery mode.
All I have is loading mode,I tried reinstall firmware,reinstall CWM.
I searched for a way to wipe data using Odin..
Can any please help
Sorry for my broken English.
nahumboaz said:
I just got my S4 19505
I rooted it, Installed CWM,Did a backup and tried to install CM kitkat.
Got a dead phone.
Read Here and installed stock firmware.
After boot I'm in gaps process crash loop.
I can't follow any advice in forums, because of the crash notification I can't change nothing in my phone settings.
I can't wipe data because from some reason I can't boot to recovery mode.
All I have is loading mode,I tried reinstall firmware,reinstall CWM.
I searched for a way to wipe data using Odin..
Can any please help
Sorry for my broken English.
Click to expand...
Click to collapse
So you can't boot into the OS at all anymore? Cause if you can at least get into the OS you can use adb to terminate the the crashed app if it still rooted. And are you certain you can no longer get to recovery? I've already made the mistake of not having the volume up button fully depressed.
Sent from my SGH-M919 using Tapatalk
elesbb said:
So you can't boot into the OS at all anymore? Cause if you can at least get into the OS you can use adb to terminate the the crashed app if it still rooted. And are you certain you can no longer get to recovery? I've already made the mistake of not having the volume up button fully depressed.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply.
After flashing stock firmware I lost root.
I can log into android OS, But because of the annoying popular I have no chance to change nothing.
As for adb you mentioned , it is something I need to learn. From the little I know, It won't help me without root.
Thank you very much.
Boaz
Have you tried chainfire's auto root?
Sent from my SGH-M919 using XDA Premium 4 mobile app
nahumboaz said:
Thank you for your reply.
After flashing stock firmware I lost root.
I can log into android OS, But because of the annoying popular I have no chance to change nothing.
As for adb you mentioned , it is something I need to learn. From the little I know, It won't help me without root.
Thank you very much.
Boaz
Click to expand...
Click to collapse
Hold the volume up button while its booting. it should get you to recovery.
elesbb said:
Hold the volume up button while its booting. it should get you to recovery.
Click to expand...
Click to collapse
I manged somehow to install stock firmware again.
Root: CF-Auto-Root-jflte-jfltexx-gti9505
CWM: i9505-cwm-recovery-6.0.3.2(0611): http://forum.xda-developers.com/attachment.php?attachmentid=2034220&d=1370946022
But again I can only boot from my OS (e.g. Quick Reboot), but not by Volume UP.
This is big problem for if, because after each mistake in try to update ROM (I'm trying to update to 4.4.2 CM 11), in order wipe I need to re-install the stock firmware.
Thx
Boaz
Thx it works
elesbb said:
Hold the volume up button while its booting. it should get you to recovery.
Click to expand...
Click to collapse
Thanks it works !!!
I always tried to hold both HOME+Volume UP. That how it works with my original ROM (stock recovery)
Don't understand how this behavior changed
Thx again
Boaz
nahumboaz said:
Thanks it works !!!
I always tried to hold both HOME+Volume UP. That how it works with my original ROM (stock recovery)
Don't understand how this behavior changed
Thx again
Boaz
Click to expand...
Click to collapse
It's actually never been home and volume up for the s4. I too was fooled by this. I guess since the s3 behaved this way someone tried it on the s4 and it worked... but I never ever needed home button pressed to boot to recovery with volume up glad everything is sorted out for ya!
Sent from my SGH-M919 using Tapatalk
Hi everybody,
I have a BIG problem, with CyanogenMod 11 - Unofficial. I installed the 05/13 update and at the beginning I only had problems with the volume bar and the reboot panel: it shows kinda grayish overlay and the only way to make it disappear was to press the backward button. So, I tried to flash back the Stock Rom, but something has gone wrong... I still have CyanogenMod 11 - Unofficial, and the gray overlay is everywhere, anytime (I managed a way but limits phone usability). Moreover, key combinations involving the power button do not work, and I'm not able to do anything like Recovery boot or Deep Reset...
I need your help!
Thanks in advance
shymon84 said:
Hi everybody,
I have a BIG problem, with CyanogenMod 11 - Unofficial. I installed the 05/13 update and at the beginning I only had problems with the volume bar and the reboot panel: it shows kinda grayish overlay and the only way to make it disappear was to press the backward button. So, I tried to flash back the Stock Rom, but something has gone wrong... I still have CyanogenMod 11 - Unofficial, and the gray overlay is everywhere, anytime (I managed a way but limits phone usability). Moreover, key combinations involving the power button do not work, and I'm not able to do anything like Recovery boot or Deep Reset...
I need your help!
Thanks in advance
Click to expand...
Click to collapse
Can you advise your device name or model number ?
vipsy6 said:
Can you advise your device name or model number ?
Click to expand...
Click to collapse
I have a Ascend P6, P6-U06. I'm sorry, I assumed it.
shymon84 said:
Hi everybody,
I have a BIG problem, with CyanogenMod 11 - Unofficial. I installed the 05/13 update and at the beginning I only had problems with the volume bar and the reboot panel: it shows kinda grayish overlay and the only way to make it disappear was to press the backward button. So, I tried to flash back the Stock Rom, but something has gone wrong... I still have CyanogenMod 11 - Unofficial, and the gray overlay is everywhere, anytime (I managed a way but limits phone usability). Moreover, key combinations involving the power button do not work, and I'm not able to do anything like Recovery boot or Deep Reset...
I need your help!
Thanks in advance
Click to expand...
Click to collapse
That's a bug from the old version, so press all buttons until the phone reboots and hold them until the you see the Huawei logo. Than it should boot TWRP and from there you should restore a backup or flash a new ROM.
taaeem said:
That's a bug from the old version, so press all buttons until the phone reboots and hold them until the you see the Huawei logo. Than it should boot TWRP and from there you should restore a backup or flash a new ROM.
Click to expand...
Click to collapse
By all buttons you mean Vol+ Vol- and Power together, right? With unlocked screen I assume... Last question, I have to do that unplugged from charge?
shymon84 said:
By all buttons you mean Vol+ Vol- and Power together, right? With unlocked screen I assume... Last question, I have to do that unplugged from charge?
Click to expand...
Click to collapse
Yes I mean that button's. And no it don't have to be unlocked the screen can also be off, and it don't matter if you have it plugged into the charger.
taaeem said:
Yes I mean that button's. And no it don't have to be unlocked the screen can also be off, and it don't matter if you have it plugged into the charger.
Click to expand...
Click to collapse
Ok, I tried, but it doesn't go any further than Huawei logo... :crying:
Since you are stuck at the logo, that means you are in fastboot mode ans you can try to install stock recovery and boot .img files than try to install the stock roms
Sent from my P6-U06 using xda app-developers app
tileeq said:
Since you are stuck at the logo, that means you are in fastboot mode ans you can try to install stock recovery and boot .img files than try to install the stock roms
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
You were right, I was in fastboot, so I installed the stock recovery and the boot.img from surdu
http://forum.xda-developers.com/showpost.php?p=51718316&postcount=2
because I supposed I was on B510, but now when it starts, doesn't go any further than the Cyanogenmod animation...
what can I do now, I'm not able to find the device on adb or fastboot...
:crying::crying::crying:
shymon84 said:
You were right, I was in fastboot, so I installed the stock recovery and the boot.img from surdu
http://forum.xda-developers.com/showpost.php?p=51718316&postcount=2
because I supposed I was on B510, but now when it starts, doesn't go any further than the Cyanogenmod animation...
what can I do now, I'm not able to find the device on adb or fastboot...
:crying::crying::crying:
Click to expand...
Click to collapse
Since now you have stock recovery you can install the stock rom, and if you want to go on custom rom it should be easier to do it.
Sent from my P6-U06 using xda app-developers app
---------- Post added at 01:17 AM ---------- Previous post was at 01:13 AM ----------
Or at least try to install twrp 2.8 and reflash the cm 11
Sent from my P6-U06 using xda app-developers app
tileeq said:
Since now you have stock recovery you can install the stock rom, and if you want to go on custom rom it should be easier to do it.
Sent from my P6-U06 using xda app-developers app
---------- Post added at 01:17 AM ---------- Previous post was at 01:13 AM ----------
Or at least try to install twrp 2.8 and reflash the cm 11
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
I'm not able anymore to use adb or fastboot: when I ask for "fastboot device" or "adb device" the result is void... but if i use the key combination that you guys adviced me, I go to a state with only the huawei logo...
What can I do?!?! :crying:
Now that isnt good news. Sry
Sent from my P6-U06 using xda app-developers app
tileeq said:
Now that isnt good news. Sry
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
So there is anything I can do? How to deep reset? I've already backupped all the data that I need...
Hm... how long do you hold that 3 buttons? It can last around half minute to get to the stock recovery... You should put sd card to another device or adapter and put stock firmware on it then back to p6 and hold 3 buttons combination untill recovery apears
n00b_user said:
Hm... how long do you hold that 3 buttons? It can last around half minute to get to the stock recovery... You should put sd card to another device or adapter and put stock firmware on it then back to p6 and hold 3 buttons combination untill recovery apears
Click to expand...
Click to collapse
When you say "stock firmware" what do you mean? the zip file with the stock rom? or the boot.img file?
The zip file with the stock rom.
Do I have to mention that you have to unzip downloaded file and put: /external_sd/dload/UPDATE.APP ?
n00b_user said:
Do I have to mention that you have to unzip downloaded file and put: /external_sd/dload/UPDATE.APP ?
Click to expand...
Click to collapse
I know it might be a stupid question, but "external_sd" should be a folder which i create like "dload" inside of it, right? :angel:
Well actually this is SD card.
Nope guys... I tried all the possible combination but TWRP doesn't start... it's stuck on huawei logo, with red charging led flashing and i'm not able to fastboot or adb
Hi!
A few days ago I flashed Gohma rom and smart me, pressed reset device at the settings. after that there was bootloop. I tried to flash stock image through fastboot, it flashed succesfully but now I cannot get out of that bootloader screen. I have tried every stock images but no luck... Whenever I power on the device it vibrates three times immediately and boots to bootloader.
So, do you have any advice here?
In the gohma ROM zip, there's a return to stock script. Try to remove the two adb commands from that script and run it to flash your watch.
It's helped some other people.
Sent from my GT-N7100 using XDA Free mobile app
dproldan said:
In the gohma ROM zip, there's a return to stock script. Try to remove the two adb commands from that script and run it to flash your watch.
It's helped some other people.
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the advice, but didnt work... still stuck on the bootloader screen :/ guess I'll send it back and hope to get replacement...
Memmpf said:
Thanks for the advice, but didnt work... still stuck on the bootloader screen :/ guess I'll send it back and hope to get replacement...
Click to expand...
Click to collapse
I had the same and I put my watch in boot loader mode and used the Super Tool found in developer area and pushed the boot loader and system to the phone and was able to get it to boot...give that a try