[Q] Stuck at bootloader - Moto 360

Hi!
A few days ago I flashed Gohma rom and smart me, pressed reset device at the settings. after that there was bootloop. I tried to flash stock image through fastboot, it flashed succesfully but now I cannot get out of that bootloader screen. I have tried every stock images but no luck... Whenever I power on the device it vibrates three times immediately and boots to bootloader.
So, do you have any advice here?

In the gohma ROM zip, there's a return to stock script. Try to remove the two adb commands from that script and run it to flash your watch.
It's helped some other people.
Sent from my GT-N7100 using XDA Free mobile app

dproldan said:
In the gohma ROM zip, there's a return to stock script. Try to remove the two adb commands from that script and run it to flash your watch.
It's helped some other people.
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the advice, but didnt work... still stuck on the bootloader screen :/ guess I'll send it back and hope to get replacement...

Memmpf said:
Thanks for the advice, but didnt work... still stuck on the bootloader screen :/ guess I'll send it back and hope to get replacement...
Click to expand...
Click to collapse
I had the same and I put my watch in boot loader mode and used the Super Tool found in developer area and pushed the boot loader and system to the phone and was able to get it to boot...give that a try

Related

xperia play shows stock kernal logo then restarts

My xperia play has been rooted and the bootloader has been unlocked but recently i tried to to wipe everything on my SD card using lupus recovery deleting everyhting and once i done this i can no longer go back to the recovery or the normal system and every time i switch on my phone it shows the lupus logo and then restarts and just does this over and over again and i can only access ADB nothing eles, can anyone please help me?!
Axelis said:
My xperia play has been rooted and the bootloader has been unlocked but recently i tried to to wipe everything on my SD card using lupus recovery deleting everyhting and once i done this i can no longer go back to the recovery or the normal system and every time i switch on my phone it shows the lupus logo and then restarts and just does this over and over again and i can only access ADB nothing eles, can anyone please help me?!
Click to expand...
Click to collapse
Remove your battery for,30 seconds and then put it back in. You should be able to access recovery now.
Sent from my R800x using xda app-developers app
still doesn't work
abdel12345 said:
Remove your battery for,30 seconds and then put it back in. You should be able to access recovery now.
I tired this but it did not help my phone is still restarting and doesnt go to the recovery, do you have any other advise please?!
Click to expand...
Click to collapse
Flash the ftf for your phone worth flash tool that will fix almost every problem but you'll lose all your data
Sent from my R800x using xda app-developers app
another problem!! sorry
abdel12345 said:
Flash the ftf for your phone worth flash tool that will fix almost every problem but you'll lose all your data
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
annoying problem! i cant get my phone to go into flash mode do you have any tips i can use? thank you in advance
xperia
Axelis said:
annoying problem! i cant get my phone to go into flash mode do you have any tips i can use? thank you in advance
Click to expand...
Click to collapse
try with fastboot !!
Damn flash tool
nakuk21 said:
try with fastboot !!
Click to expand...
Click to collapse
flash tool insists i use flash mode or then i cannot proceed :crying:
system flash
do you know what system flashing is, it sounds like it can be useful?
Thank you
thank you it seemed that taking out my battery worked i just had to try it over again!!! then i was able to go into my recovery but needed to wait a while thank you

Gnex constant reboot

Today my Gnex randomly rebooted, then got stuck rebooting. it now starts gets all the way to the home screen then reboots, then the cycle starts over. I am rooted runny shiney rom. nothing new installed recently and as stated before the phone was running normal the rebooted out of the the blue.
I have cleared cache, davik and done factory wipe, all to no avail.
the text on bottom of my bootloader reads:
Product name-tuna
variant- toro 32gb
hw version-10
bootloader version primemd04
baseband version-i515.fk02 cdma-unknown
carrier info-none
i cant flash the factory image because the phone doesn't stay powered on long enough to stay connected to the computer. apparently when i re flashed and root i forgot to make a back up so i can not restore that way either.
You could try pulling battery put back in and hold volume buttons and power to get into fastboot mode and flash factory image. Maybe you already tried this but maybe not so thought I'd throw my thoughts your way.
Sent from my Galaxy Nexus using xda app-developers app
tshelby73 said:
You could try pulling battery put back in and hold volume buttons and power to get into fastboot mode and flash factory image. Maybe you already tried this but maybe not so thought I'd throw my thoughts your way.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I have tried that but I cant get the factory image save to my phone to flash it. Now is the only time i have missed removable memory
jj69chev said:
I have tried that but I cant get the factory image save to my phone to flash it. Now is the only time i have missed removable memory
Click to expand...
Click to collapse
the phone reboot itself even when it is on bootloader mode? thats really rarely if not impossible
jj69chev said:
I have tried that but I cant get the factory image save to my phone to flash it. Now is the only time i have missed removable memory
Click to expand...
Click to collapse
So you neef help flashing the Factory image? Pm me if you do. I will help
Sent from my Galaxy Nexus using XDA Premium HD app
jj69chev said:
I have tried that but I cant get the factory image save to my phone to flash it. Now is the only time i have missed removable memory
Click to expand...
Click to collapse
You don't put image on phone you flash it using fastboot command from computer.
If you don't know how get with previous poster.
Sent from my Galaxy Nexus using xda app-developers app
andQlimax said:
the phone reboot itself even when it is on bootloader mode? thats really rarely if not impossible
Click to expand...
Click to collapse
No it doesnt reboot when in recovery, but i dont have the factory image save on the device.
tshelby73 said:
You don't put image on phone you flash it using fastboot command from computer.
If you don't know how get with previous poster.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Fastboot gives me the device not found error, I will get with previous poster as well
jj69chev said:
Fastboot gives me the device not found error, I will get with previous poster as well
Click to expand...
Click to collapse
You might not have the right drivers. Have you used fastboot before?
Sent from my Galaxy Nexus using xda app-developers app
tshelby73 said:
You might not have the right drivers. Have you used fastboot before?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I Have the correct drivers, and have used fast boot before. i think i get the error because when i factory reset it, that turns off the debugging mode.
jj69chev said:
I Have the correct drivers, and have used fast boot before. i think i get the error because when i factory reset it, that turns off the debugging mode.
Click to expand...
Click to collapse
Debugging mode is only important when you are trying to use adb while booted into Android. In the bootloader, debugging being on or off doesn't matter. It also doesn't matter in recovery either.
Something is wrong somewhere, drivers are usually the best place to start as it is probably the most common reason why the device doesn't communicate with fastboot. Other things to try are different USB cables and USB ports.
jj69chev said:
I Have the correct drivers, and have used fast boot before. i think i get the error because when i factory reset it, that turns off the debugging mode.
Click to expand...
Click to collapse
Well looks like you know what your doing so looks like you have a major issue beyond my skill level. Sorry i couldn't help. Never tried it but Odin may be a thought. If you can get into recovery you could side load using adb also.
Sent from my Galaxy Nexus using xda app-developers app
cupfulloflol said:
Debugging mode is only important when you are trying to use adb while booted into Android. In the bootloader, debugging being on or off doesn't matter. It also doesn't matter in recovery either.
Something is wrong somewhere, drivers are usually the best place to start as it is probably the most common reason why the device doesn't communicate with fastboot. Other things to try are different USB cables and USB ports.
Click to expand...
Click to collapse
When Fast booting i can not flash radio-cdma... i get an "unknown error" does this mean my cdma radio is shot?
jj69chev said:
When Fast booting i can not flash radio-cdma... i get an "unknown error" does this mean my cdma radio is shot?
Click to expand...
Click to collapse
Have you tried the flash-all it seems to do some formatting that may help but I think it does that later after the radios. Warning it will wipe your phone including sdcard.
Sent from my Galaxy Nexus using xda app-developers app
Have you tried connecting it into download mode, and then flash an odin image through odin? with that method you wont need to actually put the image onto the device but rather odin just copies it over for you while flashing the phone at the same time.
Same issue
My phone started randomly rebooting, and wont stop, it can't get past the lock screen without crashing on me. However i went into recovery, wiped everything, and flashed back to the stock rom ( i was running the shiny 4.3 rom) and the issue is still persistng, anyone know what can be done, or is something possibly wrong with the hardware?
Fahull said:
My phone started randomly rebooting, and wont stop, it can't get past the lock screen without crashing on me. However i went into recovery, wiped everything, and flashed back to the stock rom ( i was running the shiny 4.3 rom) and the issue is still persistng, anyone know what can be done, or is something possibly wrong with the hardware?
Click to expand...
Click to collapse
You found this thread but didn't read it? Seriously? This isn't 1000+ pages.... As suggested: use fastboot to flash the Factory image with the flash-all.bat.
Sent from my Galaxy Nexus using XDA Premium HD app
Fahull said:
My phone started randomly rebooting, and wont stop, it can't get past the lock screen without crashing on me. However i went into recovery, wiped everything, and flashed back to the stock rom ( i was running the shiny 4.3 rom) and the issue is still persistng, anyone know what can be done, or is something possibly wrong with the hardware?
Click to expand...
Click to collapse
I was also running shiney 4.3. I had to get a new phone because nothing I tried helped. I'm no expert but it seems to me that the CDMA radio is toast in mine/

[Q] Process crash endless loop

I just got my S4 19505
I rooted it, Installed CWM,Did a backup and tried to install CM kitkat.
Got a dead phone.
Read Here and installed stock firmware.
After boot I'm in gaps process crash loop.
I can't follow any advice in forums, because of the crash notification I can't change nothing in my phone settings.
I can't wipe data because from some reason I can't boot to recovery mode.
All I have is loading mode,I tried reinstall firmware,reinstall CWM.
I searched for a way to wipe data using Odin..
Can any please help
Sorry for my broken English.
nahumboaz said:
I just got my S4 19505
I rooted it, Installed CWM,Did a backup and tried to install CM kitkat.
Got a dead phone.
Read Here and installed stock firmware.
After boot I'm in gaps process crash loop.
I can't follow any advice in forums, because of the crash notification I can't change nothing in my phone settings.
I can't wipe data because from some reason I can't boot to recovery mode.
All I have is loading mode,I tried reinstall firmware,reinstall CWM.
I searched for a way to wipe data using Odin..
Can any please help
Sorry for my broken English.
Click to expand...
Click to collapse
So you can't boot into the OS at all anymore? Cause if you can at least get into the OS you can use adb to terminate the the crashed app if it still rooted. And are you certain you can no longer get to recovery? I've already made the mistake of not having the volume up button fully depressed.
Sent from my SGH-M919 using Tapatalk
elesbb said:
So you can't boot into the OS at all anymore? Cause if you can at least get into the OS you can use adb to terminate the the crashed app if it still rooted. And are you certain you can no longer get to recovery? I've already made the mistake of not having the volume up button fully depressed.
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply.
After flashing stock firmware I lost root.
I can log into android OS, But because of the annoying popular I have no chance to change nothing.
As for adb you mentioned , it is something I need to learn. From the little I know, It won't help me without root.
Thank you very much.
Boaz
Have you tried chainfire's auto root?
Sent from my SGH-M919 using XDA Premium 4 mobile app
nahumboaz said:
Thank you for your reply.
After flashing stock firmware I lost root.
I can log into android OS, But because of the annoying popular I have no chance to change nothing.
As for adb you mentioned , it is something I need to learn. From the little I know, It won't help me without root.
Thank you very much.
Boaz
Click to expand...
Click to collapse
Hold the volume up button while its booting. it should get you to recovery.
elesbb said:
Hold the volume up button while its booting. it should get you to recovery.
Click to expand...
Click to collapse
I manged somehow to install stock firmware again.
Root: CF-Auto-Root-jflte-jfltexx-gti9505
CWM: i9505-cwm-recovery-6.0.3.2(0611): http://forum.xda-developers.com/attachment.php?attachmentid=2034220&d=1370946022
But again I can only boot from my OS (e.g. Quick Reboot), but not by Volume UP.
This is big problem for if, because after each mistake in try to update ROM (I'm trying to update to 4.4.2 CM 11), in order wipe I need to re-install the stock firmware.
Thx
Boaz
Thx it works
elesbb said:
Hold the volume up button while its booting. it should get you to recovery.
Click to expand...
Click to collapse
Thanks it works !!!
I always tried to hold both HOME+Volume UP. That how it works with my original ROM (stock recovery)
Don't understand how this behavior changed
Thx again
Boaz
nahumboaz said:
Thanks it works !!!
I always tried to hold both HOME+Volume UP. That how it works with my original ROM (stock recovery)
Don't understand how this behavior changed
Thx again
Boaz
Click to expand...
Click to collapse
It's actually never been home and volume up for the s4. I too was fooled by this. I guess since the s3 behaved this way someone tried it on the s4 and it worked... but I never ever needed home button pressed to boot to recovery with volume up glad everything is sorted out for ya!
Sent from my SGH-M919 using Tapatalk

[Q] Softbrick help requested - fixes not working

[FIXED]
After installing CWM via FreeGee on my G Pro F240L, the device became softbricked (booting only into CWM). I tried various methods to unbrick. including the R&DTool flashing method, but encountered various errors, including the infamous battery error. When I looked at the device this morning, however, it had rebooted itself overnight and was now stuck on the LG boot logo, with the following small text in the top left corner:
Secure booting Error!
Cause: boot certification verify
The device no longer appears to be recognized in adb from my PC, and though it is still capable of booting into download mode I have had no luck with the methods posted by others for bypassing the battery-level error in the Support Tool/flasher. If anyone could help, that would be immensely appreciated.
Can you still get into recovery? And when in recovery does adb then detect the device?
chdrummerdude said:
Can you still get into recovery? And when in recovery does adb then detect the device?
Click to expand...
Click to collapse
No, I can't enter recovery, the only method of modifying firmware available to me seems to be Download Mode.
NuclearWynter said:
No, I can't enter recovery, the only method of modifying firmware available to me seems to be Download Mode.
Click to expand...
Click to collapse
So you have tried flashing back to stock using the flash tools? It's not ideal but it get the phone back up and running. I own a e980 so im not familiar with the battery error you speak of.
chdrummerdude said:
So you have tried flashing back to stock using the flash tools? It's not ideal but it get the phone back up and running. I own a e980 so im not familiar with the battery error you speak of.
Click to expand...
Click to collapse
Yep, tried several variations of the flashtool method. The battery error: at about 50% through the flashing process, it throws an error essentially saying the phone's battery needs to be at 100% in order to continue, problem being that the error comes up even when the battery is at 100% - and also comes up if I try with the battery removed from the phone.
Has anyone experienced a similar issue? I'm getting quite desperate.
Man if you could just get adb enabled.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
chdrummerdude said:
Man if you could just get adb enabled.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
That would certainly make things easier, but it seems impossible to do seeing as the phone either can't boot past the logo, or only into Download Mode.
NuclearWynter said:
That would certainly make things easier, but it seems impossible to do seeing as the phone either can't boot past the logo, or only into Download Mode.
Click to expand...
Click to collapse
Add my e980 to the list =/ just hit this problem as well. I have it worse though since I don't have a windows PC. Can't even get into recovery. All I get is the Boot up screen with the same message you received.
chdrummerdude said:
Man if you could just get adb enabled.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
hello
i have f240l i returned back to stock backup which i made CWM i received an OTA i accepted the phone restarted and after that its stuck in recovery mode only. what can i do to make this work again
I also used Freegee and it messed up my device. I don't think this tool works correctly for the OGP (e980).
Can anyone tell me if I can get back to the AT&T stock ROM using TWRP ? If so, how?
Sent from my LG-E980 using xda app-developers app

Bricked E975 with not working vol + and -, need help!

Hey, guys. I just got bricked my phone and I can not find any solution. My vol + buttno seems not to be working and the vol- button is working from time to time. The phone was with CM 12 Lillipop and I git update but I didn't like it. So I did not wiped everything before to flash it back with the original ROM (CM12) so I got bootloop of android logo. Is there any way to put it into recovery mode or something without vol + /I could make vol- to work somehow/? Please, I heed help!
Can you go to fast boot? (Vol up plus power) if yes then flash SOLID KERNEL V1.6 GPROJ through fastboot... It might work, else flash a stock kdz
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
MZ_. said:
Can you go to fast boot? (Vol up plus power) if yes then flash SOLID KERNEL V1.6 GPROJ through fastboot... It might work, else flash a stock kdz
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
Click to expand...
Click to collapse
No, it's just volume up is not working anymore. Volume down works sometimes though.
Thank you anyway. If there's other way...
Come on guys, I am begging you. If someone know a tool or something to fix my phone, I would be very thankful...
Sent from my GT-P3110 using XDA Free mobile app
Bro calm down! Just download tools and flash stock kdz
First hold both volume down buttons and connect your phone to PC with cable while holding both volume buttons. Does download mode appear? If it does then flashing stock kdz will get your phone back!
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
As I said before, my volume buttons are not working properly. That's the reason I made this thread- to find out if I can save my phone or not. I already tried flashing with kdz, but I can not boot the phone in any mode but bootloop CM lollipop logo. Also I can not install MTP on PC as it seems to be the problem when I tried with adb command prompt.
So, is there any other way except repair service for the volume buttons?
Sent from my GT-P3110 using XDA Free mobile app
Aah I got your problem. You have bootloader unlocked? To flash kdz you need a locked bootloader. Try locking it somehow (kinda impossible if you can't boot :/ ). Once you flash stock recovery and lock bootloader then you'll be able to flash kdz! I think you need to go to repair shop to fix buttons
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
MZ_. said:
Aah I got your problem. You have bootloader unlocked? To flash kdz you need a locked bootloader. Try locking it somehow (kinda impossible if you can't boot :/ ). Once you flash stock recovery and lock bootloader then you'll be able to flash kdz! I think you need to go to repair shop to fix buttons
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
Click to expand...
Click to collapse
By the way, I did installed a custom recovery via FreeGee. Since then when I reboot the phone, it shows Google and a locked locker at the bottom. It could mean locked bootloader, right? Also I have backup and all the files i need in there, but the problem is I can not reach them. Tomorrow I am going to talk to the service. I hope there's a hope
Anyway, thank you again, @MZ_
If anyone else has something in mind, please - I am opened for suggestions
Well yes it means a locked bootloader. If you could go to fastboot you could try fastboot oem unlock command. As the mako boot loader is nexus based ... Just a thought. Can you get a temp fix your vol up button? Any hard thing which presses button? :/
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
Press THANKS if I help
PharrellVP said:
By the way, I did installed a custom recovery via FreeGee. Since then when I reboot the phone, it shows Google and a locked locker at the bottom. It could mean locked bootloader, right? Also I have backup and all the files i need in there, but the problem is I can not reach them. Tomorrow I am going to talk to the service. I hope there's a hope
Anyway, thank you again, @MZ_
If anyone else has something in mind, please - I am opened for suggestions
Click to expand...
Click to collapse
locked or unlocked BL has nothing to do with the download mode. You have to take your device to download mode using some commands from PC. search for this. I think this sould work: adb reboot download
akahroba said:
locked or unlocked BL has nothing to do with the download mode. You have to take your device to download mode using some commands from PC. search for this. I think this sould work: adb reboot download
Click to expand...
Click to collapse
Dude he can't connect with ADB! Please readout the post first! He is in a softbricked state. He has recovery but his keys are damaged. I think the bootloader is locked that's why it isn't booting up (maybe) ... Or the ROM is damaged. Anyways he can't do anything till he fixes both the volume buttons!
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
/EDIT: adb reboot download isn't anything
Press THANKS if I help
Yeah, @MZ_. I am not able to do anything like this. I tried adb, but it said no device found. I took the phone to the service today so I am waiting for respond. Once again, thank you all for the suggestions. ROM is not corrupted. It is cm 12 working perfect, but when I updated it there was lots of lagg. So I did the mistake just to wipe cache and dalvik before to reflash the original ROM. So that's how I got bricked my phone. So now I am gonna wait hopefully for good ):
Sent from my GT-P3110 using XDA Free mobile app
PharrellVP said:
Yeah, @MZ_. I am not able to do anything like this. I tried adb, but it said no device found. I took the phone to the service today so I am waiting for respond. Once again, thank you all for the suggestions. ROM is not corrupted. It is cm 12 working perfect, but when I updated it there was lots of lagg. So I did the mistake just to wipe cache and dalvik before to reflash the original ROM. So that's how I got bricked my phone. So now I am gonna wait hopefully for good ):
Sent from my GT-P3110 using XDA Free mobile app
Click to expand...
Click to collapse
Well, it can't be bricked like that btw, and yeah! You need to fix your buttons in order to continue. Else use a hard thing to press them tightly so it work! Sorry
Press THANKS if I helped
Guys, I have news. The service fixed the buttons so now works like charm. So back to the business-can I do a full wipe then install the rom or I have to use kdz or so? I mean it boots into download and recovery mode.
Thanks.
Sent from my GT-I9300 using XDA Free mobile app
PharrellVP said:
Guys, I have news. The service fixed the buttons so now works like charm. So back to the business-can I do a full wipe then install the rom or I have to use kdz or so? I mean it boots into download and recovery mode.
Thanks.
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Well, yes you can now... I'd recommend you go for CM11 ... I'm really happy that it worked out :>
Hit THANKS if I help, or you like my post!
Hm, I thought the recovery is OK, but it is not. Only the download mode is working. What's now? Please, I need it urgently...
Sent from my GT-I9300 using XDA Free mobile app
I flashes stock with kdz then I did reboot into recovery. Then I just wiped everything, flashed back cm12 with gapps and now it works perfect.
Sent from my GT-I9300 using XDA Free mobile app
PharrellVP said:
Hey, guys. I just got bricked my phone and I can not find any solution. My vol + buttno seems not to be working and the vol- button is working from time to time. The phone was with CM 12 Lillipop and I git update but I didn't like it. So I did not wiped everything before to flash it back with the original ROM (CM12) so I got bootloop of android logo. Is there any way to put it into recovery mode or something without vol + /I could make vol- to work somehow/? Please, I heed help!
Click to expand...
Click to collapse
Along the way you need to flash through the programming (via JTAG), died loader ...
Mr.MEX said:
Along the way you need to flash through the programming (via JTAG), died loader ...
Click to expand...
Click to collapse
It is already solved. Please do not bump old threads.
Sent from my LG-E975 Int'l

Categories

Resources