Related
I Have Micromax Canvas AQ4501 (4GB)
Ive Tried All Possible Ways My Phone Not Booting Up:crying:
I Cant Even Start My Phone So No Question Of Booting In FastBoot Mode & Flashing A Rom,
its Good As Dead…!
Power Button Is OK As Was Flashing A Sprout 8GB Version Rom Unknowingly (Afterwards I Realised And Regretted)
I'm Out Of Warranty 1 Month Before (1year+1Month Passed)
I Tried Every Option & Combination On Sp Flash Tool Tried Manual Format Yesterday
But Of No Use…!
1) Tried "Download Only"
2) Gone To Format Section "Format Everything Except Bootloader" Then "Download Only"
3) Formated all + Download
ALL THESE SAYS DOWNLOAD SUCCESSFUL AND THAT "RIGHT" Popups
Now,
4) Tried Firmware Upgrade (After Going To Format Tab And Format All Except Bootloader)
A Strange ERROR Pops Up "PMT Info"
I Researched That ERROR "PMT Info"
Its When Partition Value Storer File Has Been Altered By Chanhe In Partition Value
So The Solution Online Was Given To "Format All" -> Download Only Preloader -> Then Flash All The Files
So… In The End I Know
1)My Preloader Is Currupt
2)Power Button Is As Good As On A New Device
3)i Dont Have Knowledge About How To I Format "Preloader" By Manual Format Option In The Sp Flash Tool, To Remove That Currupt Preloader From The Phone And Insert A New One Using Sp Flash Tool
I Think Formatting My Phone With Sprout 8GB Version Scatter File Will Solve My Problem…
THANK YOU If You Guys Read so Far… Now You Know What I Know, And what I Dont Know So… Waiting Eagerly For Your Guys Reply!
Please Help Me Get Out Of This Situation!
First
I had a problem on Htc Desire 616, it shows always an error like "google play stopped working". This is not only google play, it shows lots of names and doesn't let me use the phone. Hard reset did not work. Then I stcuk in htc logo
I decided to use SP Flash Tool to install stock rom. I tried to wipe data, however it gives an error like "/data could not mount" then I have tried to flash again using SP Flash tool But i format bootloader . When i plugged in, it does not show any reaction like charging.
Now , what should I do is it completely died or is there any hope to make it work again
Thanks .
help needed
hi buddy my phone is aswell bricked.. if u find a solution please do let me know.. i too did the same mistake, as its the first time i am using sp flat tool, i choose format all+ downloading option, since the phone is completely dead..
bala_1610 said:
hi buddy my phone is aswell bricked.. if u find a solution please do let me know.. i too did the same mistake, as its the first time i am using sp flat tool, i choose format all+ downloading option, since the phone is completely dead..
Click to expand...
Click to collapse
I'm searching for a solution right now
i think i'm losing hope , so i'm going to give it to someone who can fix it
When I find a solution , I will send you back
Same here. The same thing happened to my 616. The motherboard(NAND Memory) was gone so I gave it to a local repair shop. Probably a hardware bug.
One Trick Helped me
Turkish05 said:
First
I had a problem on Htc Desire 616, it shows always an error like "google play stopped working". This is not only google play, it shows lots of names and doesn't let me use the phone. Hard reset did not work. Then I stcuk in htc logo
I decided to use SP Flash Tool to install stock rom. I tried to wipe data, however it gives an error like "/data could not mount" then I have tried to flash again using SP Flash tool But i format bootloader . When i plugged in, it does not show any reaction like charging.
Now , what should I do is it completely died or is there any hope to make it work again
Thanks .
Click to expand...
Click to collapse
I downloaded the firmware files
And tried to flash normally but it didn't work out as the SP Tools doesn't load files properly (probably stock files problem)
so I tried to flash only
1. boot.img
2. recovery.img
3. For the third file rename the "system.ext4.img" to "system.img"
4. Select in the SP Tool -> android tab and select "system.img"
5. Remove the battery from the phone
6. Click on download in SP Tool
7. Connect the phone with the usb cable
Note : Make sure you have the drivers installed in the PC
8. After flashing it will start in russian language (dont be panic), just wait untill it done. :good:
9. Now you will land on the language selection menu
10. You still get the notifications of "unfortunately stopped ..." blah blah.(just ignore it)
11. Now you'll get some error notification "Some ID is modified". Click Ok on it.
12. After few minutes your phone will restart autmatically and it will boot in recovery with loading sign and notification "Erasing"
13. Now it will reboot after the above process automatically (Please wait as the first boot take time)
14. Again setup your phone and Viola!
Your phone will work fine! :good:
aqqshay said:
I downloaded the firmware files
And tried to flash normally but it didn't work out as the SP Tools doesn't load files properly (probably stock files problem)
so I tried to flash only
1. boot.img
2. recovery.img
3. For the third file rename the "system.ext4.img" to "system.img"
4. Select in the SP Tool -> android tab and select "system.img"
5. Remove the battery from the phone
6. Click on download in SP Tool
7. Connect the phone with the usb cable
Note : Make sure you have the drivers installed in the PC
8. After flashing it will start in russian language (dont be panic), just wait untill it done. :good:
9. Now you will land on the language selection menu
10. You still get the notifications of "unfortunately stopped ..." blah blah.(just ignore it)
11. Now you'll get some error notification "Some ID is modified". Click Ok on it.
12. After few minutes your phone will restart autmatically and it will boot in recovery with loading sign and notification "Erasing"
13. Now it will reboot after the above process automatically (Please wait as the first boot take time)
14. Again setup your phone and Viola!
Your phone will work fine! :good:
Click to expand...
Click to collapse
I was going step by sep till step 7 its shows me this
BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
so i guess there is something in my storge or what ?
same problem
Turkish05 said:
I was going step by sep till step 7 its shows me this
BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
so i guess there is something in my storge or what ?
Click to expand...
Click to collapse
did u fix it?
Turkish05 said:
First
I had a problem on Htc Desire 616, it shows always an error like "google play stopped working". This is not only google play, it shows lots of names and doesn't let me use the phone. Hard reset did not work. Then I stcuk in htc logo
I decided to use SP Flash Tool to install stock rom. I tried to wipe data, however it gives an error like "/data could not mount" then I have tried to flash again using SP Flash tool But i format bootloader . When i plugged in, it does not show any reaction like charging.
Now , what should I do is it completely died or is there any hope to make it work again
Thanks .
Click to expand...
Click to collapse
I have the exactly same problem. HTC Desire 616 stuck at HTC logo after "download only" flash using SP Flash Tool and then dead after "format + download" Please help
I am using following ROM:
0PBMIMG_V3_DUG_JB422_SENSE51_1.00.708.028_Radio_MOLY.WR8.W1315.MD.WG.MP.V21.P30_Release
Snow.man said:
I have the exactly same problem. HTC Desire 616 stuck at HTC logo after "download only" flash using SP Flash Tool and then dead after "format + download" Please help
I am using following ROM:
0PBMIMG_V3_DUG_JB422_SENSE51_1.00.708.028_Radio_MOLY.WR8.W1315.MD.WG.MP.V21.P30_Release
Click to expand...
Click to collapse
mee 2 ;(( same problem. error 5069.
Delet boot loder
Hi ihave the same problem my htc 616 is broken
Becouse i do formatt+download ...and bootloder is delet...are there any solution please....:crying::crying::crying:
Samorang said:
Hi ihave the same problem my htc 616 is broken
Becouse i do formatt+download ...and bootloder is delet...are there any solution please....:crying::crying::crying:
Click to expand...
Click to collapse
I have same problem
Sent from my TECNO-Y2 using XDA Free mobile app
htc desire 616 completely dead after format plus download
I have the same problem my htc desire 616 dual sim a month ago
Becouse i do formatt+download ...and bootloder is delet...are there any solution till now please Share
HI,
so my device is stuck in recovery boot so even when i install a ROM it keeps going to recovery again. i was suggested to use QFIL. so i did followed all the instrcutions downloaded all necessary files and port 9008 is also showing up. the problem is when i press download i get the same error. ive tried restarting the program computer and even got test mode on.
Process Index:0
Programmer Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
Image Search Path:C:\Users\Family\Desktop\zuk
Please select the XML file
Start Download
Program Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
COM Port number:9
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
PLEASE SOMEONE HELP ME THIS IS MY ONLY PHONE AND I JUST GOT IT A MONTH AGO
Please someone help
Please can someone help me im dying here
cosmicaero said:
Please can someone help me im dying here
Click to expand...
Click to collapse
Some guys had this error because the drivers wasnt installed properly. Try to install the drivers again.
Also, have you unlocked the bootloader? Try that also. That can also fix the issue.
Gerriitw said:
Some guys had this error because the drivers wasnt installed properly. Try to install the drivers again.
Also, have you unlocked the bootloader? Try that also. That can also fix the issue.
Click to expand...
Click to collapse
I've installed the ZUK_UsbDriver_1.0.5 drivers onto my PC. my bootloader was already unlocked. I rooted my phone and installed TWRP and a custom ROM. I went to factory reset my phone and now i only have the TWRP recovery left. When i go to install the new ROM zip from TWRP it installs without any errors but when it goes to boot the system it booting into TWRP.
cosmicaero said:
I've installed the ZUK_UsbDriver_1.0.5 drivers onto my PC. my bootloader was already unlocked. I rooted my phone and installed TWRP and a custom ROM. I went to factory reset my phone and now i only have the TWRP recovery left. When i go to install the new ROM zip from TWRP it installs without any errors but when it goes to boot the system it booting into TWRP.
Click to expand...
Click to collapse
Have you mount everything in the recovery? Check if everything is checked in the mount setting in twrp
Gerriitw said:
Have you mount everything in the recovery? Check if everything is checked in the mount setting in twrp
Click to expand...
Click to collapse
Can you please tell me how to do that please?
cosmicaero said:
Can you please tell me how to do that please?
Click to expand...
Click to collapse
Look at the screenies i made for you ^^
Gerriitw said:
Look at the screenies i made for you ^^
Click to expand...
Click to collapse
thank you after i've clicked them should i try to install the ROM?
cosmicaero said:
thank you after i've clicked them should i try to install the ROM?
Click to expand...
Click to collapse
If the rom is properly installed, just try to reboot agian.
Gerriitw said:
If the rom is properly installed, just try to reboot agian.
Click to expand...
Click to collapse
when i click on them and tick them and reboot the system then i reboot to system it goes back to TWRP. i look on mount again and the ones that i checked became unchecked with only 'Data' and 'Cache' the only ones stayed checked
cosmicaero said:
when i click on them and tick them and reboot the system then i reboot to system it goes back to TWRP. i look on mount again and the ones that i checked became unchecked with only 'Data' and 'Cache' the only ones stayed checked
Click to expand...
Click to collapse
Try read mount system partition only
Gerriitw said:
Try read mount system partition only
Click to expand...
Click to collapse
no that didnt work but it stays ticked
Solve Sahara Fail QFIL
cosmicaero said:
HI,
so my device is stuck in recovery boot so even when i install a ROM it keeps going to recovery again. i was suggested to use QFIL. so i did followed all the instrcutions downloaded all necessary files and port 9008 is also showing up. the problem is when i press download i get the same error. ive tried restarting the program computer and even got test mode on.
Process Index:0
Programmer Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
Image Search Path:C:\Users\Family\Desktop\zuk
Please select the XML file
Start Download
Program Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
COM Port number:9
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
PLEASE SOMEONE HELP ME THIS IS MY ONLY PHONE AND I JUST GOT IT A MONTH AGO
Click to expand...
Click to collapse
Here are a few checks that you should do to get rid of problem:
1. check for z2 plus drivers
2. check for qualcomm diag drivers
3. place the firmware folder so that path is short ('C:/firm')
4. Restart system
4. launch qfil, select relevant files as mentioned in tutorial, get into qualcomm port mode (either through shut down phone+vol up key OR adb reboot edl). As soon as you see port in qfil hit download.
cosmicaero said:
I've installed the ZUK_UsbDriver_1.0.5 drivers onto my PC. my bootloader was already unlocked. I rooted my phone and installed TWRP and a custom ROM. I went to factory reset my phone and now i only have the TWRP recovery left. When i go to install the new ROM zip from TWRP it installs without any errors but when it goes to boot the system it booting into TWRP.
Click to expand...
Click to collapse
My phone also got stuck in a TWRP bootloop and I solved it with this solution:
Go to TWRP recovery terminal commands, and enter the following:
dd if=/dev/zero of=/dev/block/platform/soc/7464900.sdhci/by-name/misc
Thread close or however you close the thread. Thanks for the results a whole month after
Thank You !!
veethree said:
My phone also got stuck in a TWRP bootloop and I solved it with this solution:
Go to TWRP recovery terminal commands, and enter the following:
dd if=/dev/zero of=/dev/block/platform/soc/7464900.sdhci/by-name/misc
Click to expand...
Click to collapse
thank you,it worked !
i was so panicked this happend and nothing worked and my phone device is like 2 days old lol
noobaj said:
thank you,it worked !
i was so panicked this happend and nothing worked and my phone device is like 2 days old lol
Click to expand...
Click to collapse
Great thanks Bro . you saved my day...
veethree said:
My phone also got stuck in a TWRP bootloop and I solved it with this solution:
Go to TWRP recovery terminal commands, and enter the following:
dd if=/dev/zero of=/dev/block/platform/soc/7464900.sdhci/by-name/misc
Click to expand...
Click to collapse
You saved my day brother..
I was at it for 6 7 hours straight until i found this thread.
Thank you.
cosmicaero said:
Can you please tell me how to do that please?
Click to expand...
Click to collapse
I just flashed ROM, clicked reboot,,then reboot bootloader...then clicked start or even started factory mode. Boots right up
---------- Post added at 02:25 AM ---------- Previous post was at 01:56 AM ----------
snehgada said:
You saved my day brother..
I was at it for 6 7 hours straight until i found this thread.
Thank you.
Click to expand...
Click to collapse
Is this all in one line?
I tried to unlock bootloader and install custom rom but the when I tried to install pixel rom in twrp mode it shows errors many time so I disconnected cable and after that I tried to connect with cable it doesn't connect do I locked the bootloader through adb fastboot loader and now my phone is not turning off or on only screen show zuk and powerd by Android.
Pls help me what to do now.
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/android/help/lenovo-k8-note-stuck-boot-logo-flashing-t3751324/post75974342#post75974342" and found this
The bootlogo issue.
Hey! I read your post regarding your k8 note being stuck at the bootlogo.
Consider that you can still use TWRP, boot into it.
Then go ahead and download the SuperSU zip on your PC/laptop and connect your phone with a USB. You might be able to see the SD card folders on your PC, then you can just copy and paste it to the internal sd and flash it. You'll be good to go. If that doesn't work, in the TWRP Mode, go to advanced and select ADB sideload. You can now flash using ADB sideload.
Search for tutorials on ADB sideload. It's easy and that should work.
Click to expand...
Click to collapse
solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
beingfhd said:
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/an...-flashing-t3751324/post75974342#post75974342" and found this solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
Click to expand...
Click to collapse
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Thanks
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
beingfhd said:
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
Click to expand...
Click to collapse
No you can't
k8 note stuck on bootloop...??
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
DeepRBasak said:
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
Click to expand...
Click to collapse
This might be helpful https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
thank u somuch am also mobile sevice man it help full for me
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
I have the same problem. please help us!
HARDROCK2614 said:
I have the same problem. please help us!
Click to expand...
Click to collapse
What problem do you have, please describe
I have lost all my mind and need serious help.
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
custom619 said:
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
Click to expand...
Click to collapse
I couldn't find more about the problem online, can you please upload a screenshot of the error. Try using the latest version of SP Flash Tool and see if the problem persists
I have lost all my mind and need serious help.
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
custom619 said:
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
Click to expand...
Click to collapse
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Anas Rahman said:
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
I have lost all my mind and need serious help.
custom619 said:
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
Click to expand...
Click to collapse
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
custom619 said:
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
Click to expand...
Click to collapse
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Anas Rahman said:
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Click to expand...
Click to collapse
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
custom619 said:
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
Click to expand...
Click to collapse
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
I Already tried this thread you suggested. No outcome.
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
This group is possibly dead. No one has responded till today...
Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Albanheraibi said:
Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Click to expand...
Click to collapse
Erecovery has started working for some people. you can try that
mrmazak said:
Erecovery has started working for some people. you can try that
Click to expand...
Click to collapse
Nope .. nothing work ..
Anyone know how to unbrick ? ..
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Albanheraibi said:
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Click to expand...
Click to collapse
Shouldn't be, at least not from that, not completely.
Was this the first condition, or an added problem?
I think best thing to try is the service ROM.
This one is BND-L21C432..
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.. If this is not the correct version for your honor 7x
Now with dc phoenix i have restore the fastboot and the erecovery, i can flash all i want but nothing happens, just boot loop at "your phone is not trusted" screen.
I was on catuva's rom before brick and now i have the catuva splashboot screen even after full firmware retore by dc phoenix.
When i try to flash in twrp i see lot of errors related to partition table (invalid argument cust, odm, sytsem etc) it seems the partition table have a problem..
The DLOAD can restore this ?
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Albanheraibi said:
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Click to expand...
Click to collapse
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
mrmazak said:
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
Click to expand...
Click to collapse
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Albanheraibi said:
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Click to expand...
Click to collapse
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
mrmazak said:
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
Click to expand...
Click to collapse
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Albanheraibi said:
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Click to expand...
Click to collapse
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
mrmazak said:
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
Click to expand...
Click to collapse
Ok after update with hurupdater via twrp (he flashed the correct radio.img file) the phone have income from death !
Thank you for trying to help me !