Related
So most of you say it doesnt fit, thats true, but you have to cut the two notches inside the watch to make it fit. thats what i did and it worked.
Ritche 22mm Stainless Steel Bracelet Watch Band Strap
http://www.amazon.com/Ritche-Stainl...raight/dp/B00DKYC7TK/ref=cm_cr_pr_product_top
This should be posted in the 22mm straps topic tbh.
Sent from my Samsung Galaxy Tab Pro 10.1
cut the watch?
oh hell naw
What did you cut the notches out with?
gtg465x said:
What did you cut the notches out with?
Click to expand...
Click to collapse
His warranty
Bryanphamx said:
So most of you say it doesnt fit, thats true, but you have to cut the two notches inside the watch to make it fit. thats what i did and it worked.
Ritche 22mm Stainless Steel Bracelet Watch Band Strap
http://www.amazon.com/Ritche-Stainl...raight/dp/B00DKYC7TK/ref=cm_cr_pr_product_top
Click to expand...
Click to collapse
Are u still able to remove the watch band because it's 22mm. Seems like no way to put screwdriver into remove it. I would think a 20mm would be better.
Hi!
I am wondering if the plastic "protector" comes with the official separate metal bands for $80?
The plastic "protector" is included with the new metal moto 360 models, but I'm not sure if it's only them or if they are being sold with the separate metal bands $80 at att.com aswell..
Why do I want to know? Well... I visited the watchmaker, he doesn't want to put on a custom metal band because "it will crack without some kind of protection". I believe him because thats probably why motorola added the plastic protector on their official 22" metal moto 360 editions. Also I wanted a more narrow band since I am thin - can only do that if I get a hold of the plastic protector for the 18 inch thinner metal bands that are not released yet
?
anyone who bought it and can answer?
We will once we receive them... Dec 5 was the availability date at the time of ordering, and that was the first hour they were posted on Moto's site.
Sent from Note 3
edit
Wait can the protector be brought separate or its only for the newer models?
Yes the plastic protectors are included with the official metal bands. I just picked up the band replacement kit during lunch today at my local best buy.
Cool... Not sold separately?
Not from what I have seen.. They do make the fit of the new metal band to be very snug against the watch itself.
I bought one of the Kriesler bands. They do NOT come with the plastic piece. Shame. They do look great however. If you have very large hands like mine, I only had to take out one link to let it get over my hand.
I can confirm that the OEM metal bands come with the plastic spacers, same as the metal band Moto 360's
Just had an online chat with Motorola support. I'll give an update about buying the spacer separately, when they get back to me.
apallohadas said:
Just had an online chat with Motorola support. I'll give an update about buying the spacer separately, when they get back to me.
Click to expand...
Click to collapse
Just a heads up - if you're looking to use them with non-Moto bands, I'm not sure it's going to work.
The Moto bands slide into two slots on the plastic connectors for a snug fit. Other bands are solid all the way across - if you were to take off their connector, the links would have to be the same size as the Moto bands.
vansmack said:
Just a heads up - if you're looking to use them with non-Moto bands, I'm not sure it's going to work.
The Moto bands slide into two slots on the plastic connectors for a snug fit. Other bands are solid all the way across - if you were to take off their connector, the links would have to be the same size as the Moto bands.
Click to expand...
Click to collapse
I know the Pebble Steel metal band fits on the moto 360( it has the right fitting, its not full), but can someone tell me the spacer for the original metal band fits the pebble steel one? Or has someone found a way to get an other spacer?
Dkouyou said:
I know the Pebble Steel metal band fits on the moto 360( it has the right fitting, its not full), but can someone tell me the spacer for the original metal band fits the pebble steel one? Or has someone found a way to get an other spacer?
Click to expand...
Click to collapse
The Pebble Steel Band does not fit in the plastic spacer provided with the Official Motorola Metal band.
I have a replacement watch arriving today, which will require me to move the official metal band from one watch to the other and I will take a photo to show you all what I am talking about.
Just ordered the official metal band from Motorola site today. Does anyone know if the included plastic spacers will prevent the back of the watch from cracking? I have read of so many people who have cracked the back of there 360 even with the stock leather bands. Can someone who has already gotten the metal bands from Motorola confirm that the spacers relieve the pressure against the back of the watch.
AndroiderM said:
Just ordered the official metal band from Motorola site today. Does anyone know if the included plastic spacers will prevent the back of the watch from cracking? I have read of so many people who have cracked the back of there 360 even with the stock leather bands. Can someone who has already gotten the metal bands from Motorola confirm that the spacers relieve the pressure against the back of the watch.
Click to expand...
Click to collapse
They do.
There has been one photo showing the plastic spacer breaking from the stress, but I've had mine for a week and the spacer is fine. It's been too small a sample size to say the back won't crack but just a few days in I'm feeling much better about it.
The watch is much heavier now, though.
vansmack said:
They do.
There has been one photo showing the plastic spacer breaking from the stress, but I've had mine for a week and the spacer is fine. It's been too small a sample size to say the back won't crack but just a few days in I'm feeling much better about it.
The watch is much heavier now, though.
Click to expand...
Click to collapse
Thanks for the info, so the band is definitely a higher quality then say the pebble steel bands?
AndroiderM said:
Thanks for the info, so the band is definitely a higher quality then say the pebble steel bands?
Click to expand...
Click to collapse
Definitely. Both in looks (it's thicker and shinier with a color that is the same as the 360) and material weight. It's heavier than the Pebble Band.
I know a number of people will say that they can get the same thing for less, but if you've purchased watch bands before, you'll find this one to be of a solid quality.
Whether or not it's worth $80 will be up to each individual, but for me it's worth it if it stops the back from cracking because of the spacer..
Dkouyou said:
I know the Pebble Steel metal band fits on the moto 360( it has the right fitting, its not full), but can someone tell me the spacer for the original metal band fits the pebble steel one? Or has someone found a way to get an other spacer?
Click to expand...
Click to collapse
Here are some photos to show you what I'm talking about. That spacer seems to be tailor made for the Moto band in how it slots in:
Had the leather band, and there were no cracks when i swapped to the Motorola metal band. 1 week later and there's a tiny crack starting in the corner. I'm going to just live with it and see how much it grows.
Hi,
Wish to share this for people who contemplate replacing the original brown band:
I just replaced it with a black leather band with off-white stitches, and also managed to keep the original Asus metal clap!
It looks just great, and I'm very happy with it
Some pics attached.
look very nice...
Looks great! Curious how you got the Asus clamp on a generic watchband... That's exactly what I'd want to do. Did you cut one end or something like that?
Nickyro23 said:
Looks great! Curious how you got the Asus clamp on a generic watchband... That's exactly what I'd want to do. Did you cut one end or something like that?
Click to expand...
Click to collapse
That's the beauty of it didn't need to cut anything on either bands!
It detaches easily out of the original band by pulling the clamp connector pin, and found several bands that I could just slide the Asus clamp on as-is. It attaches into one of the existing holes. I did widen the hole in the black band just a bit to get it in there all the way.
adiror said:
That's the beauty of it didn't need to cut anything on either bands!
It detaches easily out of the original band by pulling the clamp connector pin, and found several bands that I could just slide the Asus clamp on as-is. It attaches into one of the existing holes. I did widen the hole in the black band just a bit to get it in there all the way.
Click to expand...
Click to collapse
I know you have to just pull the connector pin out but on the new band, it must be a specific type leather band that accepts that connector pin on the one end right? Can't just be a generic leather band with a buckle... Correct?
Nickyro23 said:
I know you have to just pull the connector pin out but on the new band, it must be a specific type leather band that accepts that connector pin on the one end right? Can't just be a generic leather band with a buckle... Correct?
Click to expand...
Click to collapse
It is just a generic band with a buckle. Only replaced its buckle with the Asus clip as described
adiror said:
It is just a generic band with a buckle. Only replaced its buckle with the Asus clip as described
Click to expand...
Click to collapse
I guess I just wasn't aware the buckle on a generic band could come off easily without cutting it off. Good to know though! Thanks for the info.
This was great....I really like the buckle and this was so simple.
Great job, well done - I was hoping somebody would post with a black band - looks nice.
From what I understand of after-market bands and clasps is that a lot of buckles are attached with a similar pin that attaches the band to the watch. Pop that off and you can fit a deployment clasp (like the Asus one here).
The clasps - of which there seem to be quite a few out there - come in various widths to accommodate the tapering of the band from watch to buckle (usually about 2mm thinner at the buckle end, but YMMV). So, a 22mm band might require a 20mm deployment clasp or buckle.
I don't suppose you could post a measurement of how wide that strap is at the buckle end, could you? Or, the inner-width of the clasp? That way we can buy online bands and be fairly certain that the Asus clasp can still be used.
I know I'll need a different strap when it's available in the UK, just toying whether to get a new clasp too.
Cessquill said:
Great job, well done - I was hoping somebody would post with a black band - looks nice.
From what I understand of after-market bands and clasps is that a lot of buckles are attached with a similar pin that attaches the band to the watch. Pop that off and you can fit a deployment clasp (like the Asus one here).
The clasps - of which there seem to be quite a few out there - come in various widths to accommodate the tapering of the band from watch to buckle (usually about 2mm thinner at the buckle end, but YMMV). So, a 22mm band might require a 20mm deployment clasp or buckle.
I don't suppose you could post a measurement of how wide that strap is at the buckle end, could you? Or, the inner-width of the clasp? That way we can buy online bands and be fairly certain that the Asus clasp can still be used.
I know I'll need a different strap when it's available in the UK, just toying whether to get a new clasp too.
Click to expand...
Click to collapse
Sure - The strap width is 18mm (also of the original band). The inner width of the clasp is 2-3mm wider.
I would recommend in this case to just step into a local shop, and pick something that fits. If you do order online be sure it also includes the spring connector pins that hook to the phone body. The original ones are not easy to interchange because they have a special release hook that sticks out.
Dang, I thought I did this first I did mine about a week ago, just didnt get around to posting images. Yours looks better since you used a band that tapered. Mine didnt (some cheap walmart band) so I had to cut tiny nothces on the latch side.
Can you link us to where you got your band?
adiror said:
Sure - The strap width is 18mm (also of the original band). The inner width of the clasp is 2-3mm wider.
Click to expand...
Click to collapse
Thanks for that. For clarification, the band tapers from 22mm at the watch end to 18mm at the buckle on the original band, yes?
I'll try shopping locally, but there's not so much around where I live. I had thought about the spring clips, since they've got that quick removal lever, which wouldn't transfer. At the very least, I know a different deployment clasp can be used so it's not the end of the world.
WACOMalt said:
Dang, I thought I did this first I did mine about a week ago, just didnt get around to posting images. Yours looks better since you used a band that tapered. Mine didnt (some cheap walmart band) so I had to cut tiny nothces on the latch side.
Can you link us to where you got your band?
Click to expand...
Click to collapse
Very nice!
(I live abroad, and got the band at a small local merchant)
Cessquill said:
Thanks for that. For clarification, the band tapers from 22mm at the watch end to 18mm at the buckle on the original band, yes?
I'll try shopping locally, but there's not so much around where I live. I had thought about the spring clips, since they've got that quick removal lever, which wouldn't transfer. At the very least, I know a different deployment clasp can be used so it's not the end of the world.
Click to expand...
Click to collapse
Yes thats correct
Here is another band with Asus clasp. Swiss Army Style.
yaggermr said:
Here is another band with Asus clasp. Swiss Army Style.
Click to expand...
Click to collapse
I like this one. Any link to site?
I bought it from amazon eBay also sells it.
22mm Brown Genuine Oil Tan Leather & Canvas Hadley Roma Watch Band Strap MS868
http://www.amazon.com/gp/aw/d/B00G4F2XG4/ref=mp_s_a_1_1?qid=1417302153&sr=8-1&pi=AC_SX200_QL40
Anyone replace with metal band?
And how it look?
Sent from my D6503 using XDA Free mobile app
paullu said:
Anyone replace with metal band?
And how it look?
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/zenwatch/general/alternative-straps-asus-zenwatch-t2943141
A couple of posts down.
@adiror May I ask where your bought that strap? Thanks.
Hey guys,
I've been able to check tons of tutorials showing how to remove leather bands from the Moto 360 and put the new Motorola's steel band or the Pebble one. However, I bought the metal steel band moto 360 and would love to know how to remove it as Ive also bought the leather band and I find that in some ocassions I'd love to use it.
Can't find any tutorials on how to remove the official metal band of moto 360 which seems to be super hard, at least for me, as it has the black elements that separate the band from the watch.
Is there anyone who could help me find any tutorials or that know about it?
Thanks in advance!
It's actually easier to take off the metal band than it is the leather band.
With the plastic spacers, they've left a little hole that exposes the rod that connects the band to the watch. Use the same tool you would for the leather band in that tiny hole and release the spring rod.
With the leather band you have to create space whereas the steel band has the space left for you.
Hi guys,
Im fairly happy with my moto 360, I have the silver one with a leather stock band.
Altough I like the metal band more..
So, I have a simple question.
Can i put a metal band on, without cracking the back of the moto 360?
If so, wich one?
Thanks
ALSO : Is the stock leather band water proof? So for example, I take a shower or bath, it wont screw up the band?
Try the official steel band that Motorola has released for our watch. The official metal band has plastic sleeves that insert into the holes that prevent the cracking of the back.. You can also try the pebble steel band. I used the pebble steel band before I got the official metal band and I have no cracking on the back, but ur luck might vary.
Yeah, I did try the pebble steel band. It cracked the whole back.. Luckily for me I got a replacement !
Also, is the stock leather band water proof? So I can take a shower or bath with it?
Thanks
Deltastylez said:
Yeah, I did try the pebble steel band. It cracked the whole back.. Luckily for me I got a replacement !
Also, is the stock leather band water proof? So I can take a shower or bath with it?
Thanks
Click to expand...
Click to collapse
No, the leather is not waterproof. It stains and absorbs moisture. I had to dye my band a dark color to remove the staining from water and sweat.
Alright thanks
I think i have to replace it later this year. My band is already begon to recolor.. *sad face*
And you can sea the sweat on the inside of the band ..
Deltastylez said:
Alright thanks
I think i have to replace it later this year. My band is already begon to recolor.. *sad face*
And you can sea the sweat on the inside of the band ..
Click to expand...
Click to collapse
I personally have fitted a Pebble Steel band to my watch, there are other bands available on amazon with various styles.
I would like to get the official band but its not for sale in my country.
You may need to buy a tool to help you take off the leather band as I found this a bit fiddly.
When you look to buy a new watch band, make sure that there is a notch cut out at the top of the strap. There are other threads that mention this.
theickleone said:
I personally have fitted a Pebble Steel band to my watch, there are other bands available on amazon with various styles.
I would like to get the official band but its not for sale in my country.
You may need to buy a tool to help you take off the leather band as I found this a bit fiddly.
When you look to buy a new watch band, make sure that there is a notch cut out at the top of the strap. There are other threads that mention this.
Click to expand...
Click to collapse
Yeah, I had the pepple steel band to. But after that, my back got cracked.
Not sure if its due the pepple band, or due something else?
Deltastylez said:
Yeah, I had the pepple steel band to. But after that, my back got cracked.
Not sure if its due the pepple band, or due something else?
Click to expand...
Click to collapse
From what I have seen, the design of the Pebble Steel band puts pressure on the back of the watch - Which causes it to crack.
The official Moto 360 band has a special link design and spacer to negate this, I'm worried that this will happen to my watch and I am tempted to put the leather strap back on .
Although I've ordered a cheap strap from eBay that mimics the official design.
Ive had pebble band on my 360 since decembre ....no crack here ....
Sent from my HTC One_M8 using XDA Free mobile app
Is there any one that can tell me, if I can take a shower with de stone leather band?
Or is that really bad for the leather band?
I hope someone can help
Deltastylez said:
Is there any one that can tell me, if I can take a shower with de stone leather band?
Or is that really bad for the leather band?
I hope someone can help
Click to expand...
Click to collapse
The band will stain. Also it absorbs water so ends up getting smelly.